| /* | 
 |  * Codec driver for ST STA32x 2.1-channel high-efficiency digital audio system | 
 |  * | 
 |  * Copyright: 2011 Raumfeld GmbH | 
 |  * Author: Johannes Stezenbach <js@sig21.net> | 
 |  * | 
 |  * based on code from: | 
 |  *	Wolfson Microelectronics PLC. | 
 |  *	  Mark Brown <broonie@opensource.wolfsonmicro.com> | 
 |  *	Freescale Semiconductor, Inc. | 
 |  *	  Timur Tabi <timur@freescale.com> | 
 |  * | 
 |  * This program is free software; you can redistribute  it and/or modify it | 
 |  * under  the terms of  the GNU General  Public License as published by the | 
 |  * Free Software Foundation;  either version 2 of the  License, or (at your | 
 |  * option) any later version. | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ":%s:%d: " fmt, __func__, __LINE__ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/init.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/pm.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/regulator/consumer.h> | 
 | #include <linux/slab.h> | 
 | #include <sound/core.h> | 
 | #include <sound/pcm.h> | 
 | #include <sound/pcm_params.h> | 
 | #include <sound/soc.h> | 
 | #include <sound/soc-dapm.h> | 
 | #include <sound/initval.h> | 
 | #include <sound/tlv.h> | 
 |  | 
 | #include "sta32x.h" | 
 |  | 
 | #define STA32X_RATES (SNDRV_PCM_RATE_32000 | \ | 
 | 		      SNDRV_PCM_RATE_44100 | \ | 
 | 		      SNDRV_PCM_RATE_48000 | \ | 
 | 		      SNDRV_PCM_RATE_88200 | \ | 
 | 		      SNDRV_PCM_RATE_96000 | \ | 
 | 		      SNDRV_PCM_RATE_176400 | \ | 
 | 		      SNDRV_PCM_RATE_192000) | 
 |  | 
 | #define STA32X_FORMATS \ | 
 | 	(SNDRV_PCM_FMTBIT_S16_LE  | SNDRV_PCM_FMTBIT_S16_BE  | \ | 
 | 	 SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S18_3BE | \ | 
 | 	 SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE | \ | 
 | 	 SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | \ | 
 | 	 SNDRV_PCM_FMTBIT_S24_LE  | SNDRV_PCM_FMTBIT_S24_BE  | \ | 
 | 	 SNDRV_PCM_FMTBIT_S32_LE  | SNDRV_PCM_FMTBIT_S32_BE) | 
 |  | 
 | /* Power-up register defaults */ | 
 | static const u8 sta32x_regs[STA32X_REGISTER_COUNT] = { | 
 | 	0x63, 0x80, 0xc2, 0x40, 0xc2, 0x5c, 0x10, 0xff, 0x60, 0x60, | 
 | 	0x60, 0x80, 0x00, 0x00, 0x00, 0x40, 0x80, 0x77, 0x6a, 0x69, | 
 | 	0x6a, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2d, | 
 | 	0xc0, 0xf3, 0x33, 0x00, 0x0c, | 
 | }; | 
 |  | 
 | /* regulator power supply names */ | 
 | static const char *sta32x_supply_names[] = { | 
 | 	"Vdda",	/* analog supply, 3.3VV */ | 
 | 	"Vdd3",	/* digital supply, 3.3V */ | 
 | 	"Vcc"	/* power amp spply, 10V - 36V */ | 
 | }; | 
 |  | 
 | /* codec private data */ | 
 | struct sta32x_priv { | 
 | 	struct regulator_bulk_data supplies[ARRAY_SIZE(sta32x_supply_names)]; | 
 | 	struct snd_soc_codec *codec; | 
 |  | 
 | 	unsigned int mclk; | 
 | 	unsigned int format; | 
 | }; | 
 |  | 
 | static const DECLARE_TLV_DB_SCALE(mvol_tlv, -12700, 50, 1); | 
 | static const DECLARE_TLV_DB_SCALE(chvol_tlv, -7950, 50, 1); | 
 | static const DECLARE_TLV_DB_SCALE(tone_tlv, -120, 200, 0); | 
 |  | 
 | static const char *sta32x_drc_ac[] = { | 
 | 	"Anti-Clipping", "Dynamic Range Compression" }; | 
 | static const char *sta32x_auto_eq_mode[] = { | 
 | 	"User", "Preset", "Loudness" }; | 
 | static const char *sta32x_auto_gc_mode[] = { | 
 | 	"User", "AC no clipping", "AC limited clipping (10%)", | 
 | 	"DRC nighttime listening mode" }; | 
 | static const char *sta32x_auto_xo_mode[] = { | 
 | 	"User", "80Hz", "100Hz", "120Hz", "140Hz", "160Hz", "180Hz", "200Hz", | 
 | 	"220Hz", "240Hz", "260Hz", "280Hz", "300Hz", "320Hz", "340Hz", "360Hz" }; | 
 | static const char *sta32x_preset_eq_mode[] = { | 
 | 	"Flat", "Rock", "Soft Rock", "Jazz", "Classical", "Dance", "Pop", "Soft", | 
 | 	"Hard", "Party", "Vocal", "Hip-Hop", "Dialog", "Bass-boost #1", | 
 | 	"Bass-boost #2", "Bass-boost #3", "Loudness 1", "Loudness 2", | 
 | 	"Loudness 3", "Loudness 4", "Loudness 5", "Loudness 6", "Loudness 7", | 
 | 	"Loudness 8", "Loudness 9", "Loudness 10", "Loudness 11", "Loudness 12", | 
 | 	"Loudness 13", "Loudness 14", "Loudness 15", "Loudness 16" }; | 
 | static const char *sta32x_limiter_select[] = { | 
 | 	"Limiter Disabled", "Limiter #1", "Limiter #2" }; | 
 | static const char *sta32x_limiter_attack_rate[] = { | 
 | 	"3.1584", "2.7072", "2.2560", "1.8048", "1.3536", "0.9024", | 
 | 	"0.4512", "0.2256", "0.1504", "0.1123", "0.0902", "0.0752", | 
 | 	"0.0645", "0.0564", "0.0501", "0.0451" }; | 
 | static const char *sta32x_limiter_release_rate[] = { | 
 | 	"0.5116", "0.1370", "0.0744", "0.0499", "0.0360", "0.0299", | 
 | 	"0.0264", "0.0208", "0.0198", "0.0172", "0.0147", "0.0137", | 
 | 	"0.0134", "0.0117", "0.0110", "0.0104" }; | 
 |  | 
 | static const unsigned int sta32x_limiter_ac_attack_tlv[] = { | 
 | 	TLV_DB_RANGE_HEAD(2), | 
 | 	0, 7, TLV_DB_SCALE_ITEM(-1200, 200, 0), | 
 | 	8, 16, TLV_DB_SCALE_ITEM(300, 100, 0), | 
 | }; | 
 |  | 
 | static const unsigned int sta32x_limiter_ac_release_tlv[] = { | 
 | 	TLV_DB_RANGE_HEAD(5), | 
 | 	0, 0, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 0), | 
 | 	1, 1, TLV_DB_SCALE_ITEM(-2900, 0, 0), | 
 | 	2, 2, TLV_DB_SCALE_ITEM(-2000, 0, 0), | 
 | 	3, 8, TLV_DB_SCALE_ITEM(-1400, 200, 0), | 
 | 	8, 16, TLV_DB_SCALE_ITEM(-700, 100, 0), | 
 | }; | 
 |  | 
 | static const unsigned int sta32x_limiter_drc_attack_tlv[] = { | 
 | 	TLV_DB_RANGE_HEAD(3), | 
 | 	0, 7, TLV_DB_SCALE_ITEM(-3100, 200, 0), | 
 | 	8, 13, TLV_DB_SCALE_ITEM(-1600, 100, 0), | 
 | 	14, 16, TLV_DB_SCALE_ITEM(-1000, 300, 0), | 
 | }; | 
 |  | 
 | static const unsigned int sta32x_limiter_drc_release_tlv[] = { | 
 | 	TLV_DB_RANGE_HEAD(5), | 
 | 	0, 0, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 0), | 
 | 	1, 2, TLV_DB_SCALE_ITEM(-3800, 200, 0), | 
 | 	3, 4, TLV_DB_SCALE_ITEM(-3300, 200, 0), | 
 | 	5, 12, TLV_DB_SCALE_ITEM(-3000, 200, 0), | 
 | 	13, 16, TLV_DB_SCALE_ITEM(-1500, 300, 0), | 
 | }; | 
 |  | 
 | static const struct soc_enum sta32x_drc_ac_enum = | 
 | 	SOC_ENUM_SINGLE(STA32X_CONFD, STA32X_CONFD_DRC_SHIFT, | 
 | 			2, sta32x_drc_ac); | 
 | static const struct soc_enum sta32x_auto_eq_enum = | 
 | 	SOC_ENUM_SINGLE(STA32X_AUTO1, STA32X_AUTO1_AMEQ_SHIFT, | 
 | 			3, sta32x_auto_eq_mode); | 
 | static const struct soc_enum sta32x_auto_gc_enum = | 
 | 	SOC_ENUM_SINGLE(STA32X_AUTO1, STA32X_AUTO1_AMGC_SHIFT, | 
 | 			4, sta32x_auto_gc_mode); | 
 | static const struct soc_enum sta32x_auto_xo_enum = | 
 | 	SOC_ENUM_SINGLE(STA32X_AUTO2, STA32X_AUTO2_XO_SHIFT, | 
 | 			16, sta32x_auto_xo_mode); | 
 | static const struct soc_enum sta32x_preset_eq_enum = | 
 | 	SOC_ENUM_SINGLE(STA32X_AUTO3, STA32X_AUTO3_PEQ_SHIFT, | 
 | 			32, sta32x_preset_eq_mode); | 
 | static const struct soc_enum sta32x_limiter_ch1_enum = | 
 | 	SOC_ENUM_SINGLE(STA32X_C1CFG, STA32X_CxCFG_LS_SHIFT, | 
 | 			3, sta32x_limiter_select); | 
 | static const struct soc_enum sta32x_limiter_ch2_enum = | 
 | 	SOC_ENUM_SINGLE(STA32X_C2CFG, STA32X_CxCFG_LS_SHIFT, | 
 | 			3, sta32x_limiter_select); | 
 | static const struct soc_enum sta32x_limiter_ch3_enum = | 
 | 	SOC_ENUM_SINGLE(STA32X_C3CFG, STA32X_CxCFG_LS_SHIFT, | 
 | 			3, sta32x_limiter_select); | 
 | static const struct soc_enum sta32x_limiter1_attack_rate_enum = | 
 | 	SOC_ENUM_SINGLE(STA32X_L1AR, STA32X_LxA_SHIFT, | 
 | 			16, sta32x_limiter_attack_rate); | 
 | static const struct soc_enum sta32x_limiter2_attack_rate_enum = | 
 | 	SOC_ENUM_SINGLE(STA32X_L2AR, STA32X_LxA_SHIFT, | 
 | 			16, sta32x_limiter_attack_rate); | 
 | static const struct soc_enum sta32x_limiter1_release_rate_enum = | 
 | 	SOC_ENUM_SINGLE(STA32X_L1AR, STA32X_LxR_SHIFT, | 
 | 			16, sta32x_limiter_release_rate); | 
 | static const struct soc_enum sta32x_limiter2_release_rate_enum = | 
 | 	SOC_ENUM_SINGLE(STA32X_L2AR, STA32X_LxR_SHIFT, | 
 | 			16, sta32x_limiter_release_rate); | 
 |  | 
 | /* byte array controls for setting biquad, mixer, scaling coefficients; | 
 |  * for biquads all five coefficients need to be set in one go, | 
 |  * mixer and pre/postscale coefs can be set individually; | 
 |  * each coef is 24bit, the bytes are ordered in the same way | 
 |  * as given in the STA32x data sheet (big endian; b1, b2, a1, a2, b0) | 
 |  */ | 
 |  | 
 | static int sta32x_coefficient_info(struct snd_kcontrol *kcontrol, | 
 | 				   struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	int numcoef = kcontrol->private_value >> 16; | 
 | 	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES; | 
 | 	uinfo->count = 3 * numcoef; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sta32x_coefficient_get(struct snd_kcontrol *kcontrol, | 
 | 				  struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); | 
 | 	int numcoef = kcontrol->private_value >> 16; | 
 | 	int index = kcontrol->private_value & 0xffff; | 
 | 	unsigned int cfud; | 
 | 	int i; | 
 |  | 
 | 	/* preserve reserved bits in STA32X_CFUD */ | 
 | 	cfud = snd_soc_read(codec, STA32X_CFUD) & 0xf0; | 
 | 	/* chip documentation does not say if the bits are self clearing, | 
 | 	 * so do it explicitly */ | 
 | 	snd_soc_write(codec, STA32X_CFUD, cfud); | 
 |  | 
 | 	snd_soc_write(codec, STA32X_CFADDR2, index); | 
 | 	if (numcoef == 1) | 
 | 		snd_soc_write(codec, STA32X_CFUD, cfud | 0x04); | 
 | 	else if (numcoef == 5) | 
 | 		snd_soc_write(codec, STA32X_CFUD, cfud | 0x08); | 
 | 	else | 
 | 		return -EINVAL; | 
 | 	for (i = 0; i < 3 * numcoef; i++) | 
 | 		ucontrol->value.bytes.data[i] = | 
 | 			snd_soc_read(codec, STA32X_B1CF1 + i); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sta32x_coefficient_put(struct snd_kcontrol *kcontrol, | 
 | 				  struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); | 
 | 	int numcoef = kcontrol->private_value >> 16; | 
 | 	int index = kcontrol->private_value & 0xffff; | 
 | 	unsigned int cfud; | 
 | 	int i; | 
 |  | 
 | 	/* preserve reserved bits in STA32X_CFUD */ | 
 | 	cfud = snd_soc_read(codec, STA32X_CFUD) & 0xf0; | 
 | 	/* chip documentation does not say if the bits are self clearing, | 
 | 	 * so do it explicitly */ | 
 | 	snd_soc_write(codec, STA32X_CFUD, cfud); | 
 |  | 
 | 	snd_soc_write(codec, STA32X_CFADDR2, index); | 
 | 	for (i = 0; i < 3 * numcoef; i++) | 
 | 		snd_soc_write(codec, STA32X_B1CF1 + i, | 
 | 			      ucontrol->value.bytes.data[i]); | 
 | 	if (numcoef == 1) | 
 | 		snd_soc_write(codec, STA32X_CFUD, cfud | 0x01); | 
 | 	else if (numcoef == 5) | 
 | 		snd_soc_write(codec, STA32X_CFUD, cfud | 0x02); | 
 | 	else | 
 | 		return -EINVAL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #define SINGLE_COEF(xname, index) \ | 
 | {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ | 
 | 	.info = sta32x_coefficient_info, \ | 
 | 	.get = sta32x_coefficient_get,\ | 
 | 	.put = sta32x_coefficient_put, \ | 
 | 	.private_value = index | (1 << 16) } | 
 |  | 
 | #define BIQUAD_COEFS(xname, index) \ | 
 | {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ | 
 | 	.info = sta32x_coefficient_info, \ | 
 | 	.get = sta32x_coefficient_get,\ | 
 | 	.put = sta32x_coefficient_put, \ | 
 | 	.private_value = index | (5 << 16) } | 
 |  | 
 | static const struct snd_kcontrol_new sta32x_snd_controls[] = { | 
 | SOC_SINGLE_TLV("Master Volume", STA32X_MVOL, 0, 0xff, 1, mvol_tlv), | 
 | SOC_SINGLE("Master Switch", STA32X_MMUTE, 0, 1, 1), | 
 | SOC_SINGLE("Ch1 Switch", STA32X_MMUTE, 1, 1, 1), | 
 | SOC_SINGLE("Ch2 Switch", STA32X_MMUTE, 2, 1, 1), | 
 | SOC_SINGLE("Ch3 Switch", STA32X_MMUTE, 3, 1, 1), | 
 | SOC_SINGLE_TLV("Ch1 Volume", STA32X_C1VOL, 0, 0xff, 1, chvol_tlv), | 
 | SOC_SINGLE_TLV("Ch2 Volume", STA32X_C2VOL, 0, 0xff, 1, chvol_tlv), | 
 | SOC_SINGLE_TLV("Ch3 Volume", STA32X_C3VOL, 0, 0xff, 1, chvol_tlv), | 
 | SOC_SINGLE("De-emphasis Filter Switch", STA32X_CONFD, STA32X_CONFD_DEMP_SHIFT, 1, 0), | 
 | SOC_ENUM("Compressor/Limiter Switch", sta32x_drc_ac_enum), | 
 | SOC_SINGLE("Miami Mode Switch", STA32X_CONFD, STA32X_CONFD_MME_SHIFT, 1, 0), | 
 | SOC_SINGLE("Zero Cross Switch", STA32X_CONFE, STA32X_CONFE_ZCE_SHIFT, 1, 0), | 
 | SOC_SINGLE("Soft Ramp Switch", STA32X_CONFE, STA32X_CONFE_SVE_SHIFT, 1, 0), | 
 | SOC_SINGLE("Auto-Mute Switch", STA32X_CONFF, STA32X_CONFF_IDE_SHIFT, 1, 0), | 
 | SOC_ENUM("Automode EQ", sta32x_auto_eq_enum), | 
 | SOC_ENUM("Automode GC", sta32x_auto_gc_enum), | 
 | SOC_ENUM("Automode XO", sta32x_auto_xo_enum), | 
 | SOC_ENUM("Preset EQ", sta32x_preset_eq_enum), | 
 | SOC_SINGLE("Ch1 Tone Control Bypass Switch", STA32X_C1CFG, STA32X_CxCFG_TCB_SHIFT, 1, 0), | 
 | SOC_SINGLE("Ch2 Tone Control Bypass Switch", STA32X_C2CFG, STA32X_CxCFG_TCB_SHIFT, 1, 0), | 
 | SOC_SINGLE("Ch1 EQ Bypass Switch", STA32X_C1CFG, STA32X_CxCFG_EQBP_SHIFT, 1, 0), | 
 | SOC_SINGLE("Ch2 EQ Bypass Switch", STA32X_C2CFG, STA32X_CxCFG_EQBP_SHIFT, 1, 0), | 
 | SOC_SINGLE("Ch1 Master Volume Bypass Switch", STA32X_C1CFG, STA32X_CxCFG_VBP_SHIFT, 1, 0), | 
 | SOC_SINGLE("Ch2 Master Volume Bypass Switch", STA32X_C1CFG, STA32X_CxCFG_VBP_SHIFT, 1, 0), | 
 | SOC_SINGLE("Ch3 Master Volume Bypass Switch", STA32X_C1CFG, STA32X_CxCFG_VBP_SHIFT, 1, 0), | 
 | SOC_ENUM("Ch1 Limiter Select", sta32x_limiter_ch1_enum), | 
 | SOC_ENUM("Ch2 Limiter Select", sta32x_limiter_ch2_enum), | 
 | SOC_ENUM("Ch3 Limiter Select", sta32x_limiter_ch3_enum), | 
 | SOC_SINGLE_TLV("Bass Tone Control", STA32X_TONE, STA32X_TONE_BTC_SHIFT, 15, 0, tone_tlv), | 
 | SOC_SINGLE_TLV("Treble Tone Control", STA32X_TONE, STA32X_TONE_TTC_SHIFT, 15, 0, tone_tlv), | 
 | SOC_ENUM("Limiter1 Attack Rate (dB/ms)", sta32x_limiter1_attack_rate_enum), | 
 | SOC_ENUM("Limiter2 Attack Rate (dB/ms)", sta32x_limiter2_attack_rate_enum), | 
 | SOC_ENUM("Limiter1 Release Rate (dB/ms)", sta32x_limiter1_release_rate_enum), | 
 | SOC_ENUM("Limiter2 Release Rate (dB/ms)", sta32x_limiter1_release_rate_enum), | 
 |  | 
 | /* depending on mode, the attack/release thresholds have | 
 |  * two different enum definitions; provide both | 
 |  */ | 
 | SOC_SINGLE_TLV("Limiter1 Attack Threshold (AC Mode)", STA32X_L1ATRT, STA32X_LxA_SHIFT, | 
 | 	       16, 0, sta32x_limiter_ac_attack_tlv), | 
 | SOC_SINGLE_TLV("Limiter2 Attack Threshold (AC Mode)", STA32X_L2ATRT, STA32X_LxA_SHIFT, | 
 | 	       16, 0, sta32x_limiter_ac_attack_tlv), | 
 | SOC_SINGLE_TLV("Limiter1 Release Threshold (AC Mode)", STA32X_L1ATRT, STA32X_LxR_SHIFT, | 
 | 	       16, 0, sta32x_limiter_ac_release_tlv), | 
 | SOC_SINGLE_TLV("Limiter2 Release Threshold (AC Mode)", STA32X_L2ATRT, STA32X_LxR_SHIFT, | 
 | 	       16, 0, sta32x_limiter_ac_release_tlv), | 
 | SOC_SINGLE_TLV("Limiter1 Attack Threshold (DRC Mode)", STA32X_L1ATRT, STA32X_LxA_SHIFT, | 
 | 	       16, 0, sta32x_limiter_drc_attack_tlv), | 
 | SOC_SINGLE_TLV("Limiter2 Attack Threshold (DRC Mode)", STA32X_L2ATRT, STA32X_LxA_SHIFT, | 
 | 	       16, 0, sta32x_limiter_drc_attack_tlv), | 
 | SOC_SINGLE_TLV("Limiter1 Release Threshold (DRC Mode)", STA32X_L1ATRT, STA32X_LxR_SHIFT, | 
 | 	       16, 0, sta32x_limiter_drc_release_tlv), | 
 | SOC_SINGLE_TLV("Limiter2 Release Threshold (DRC Mode)", STA32X_L2ATRT, STA32X_LxR_SHIFT, | 
 | 	       16, 0, sta32x_limiter_drc_release_tlv), | 
 |  | 
 | BIQUAD_COEFS("Ch1 - Biquad 1", 0), | 
 | BIQUAD_COEFS("Ch1 - Biquad 2", 5), | 
 | BIQUAD_COEFS("Ch1 - Biquad 3", 10), | 
 | BIQUAD_COEFS("Ch1 - Biquad 4", 15), | 
 | BIQUAD_COEFS("Ch2 - Biquad 1", 20), | 
 | BIQUAD_COEFS("Ch2 - Biquad 2", 25), | 
 | BIQUAD_COEFS("Ch2 - Biquad 3", 30), | 
 | BIQUAD_COEFS("Ch2 - Biquad 4", 35), | 
 | BIQUAD_COEFS("High-pass", 40), | 
 | BIQUAD_COEFS("Low-pass", 45), | 
 | SINGLE_COEF("Ch1 - Prescale", 50), | 
 | SINGLE_COEF("Ch2 - Prescale", 51), | 
 | SINGLE_COEF("Ch1 - Postscale", 52), | 
 | SINGLE_COEF("Ch2 - Postscale", 53), | 
 | SINGLE_COEF("Ch3 - Postscale", 54), | 
 | SINGLE_COEF("Thermal warning - Postscale", 55), | 
 | SINGLE_COEF("Ch1 - Mix 1", 56), | 
 | SINGLE_COEF("Ch1 - Mix 2", 57), | 
 | SINGLE_COEF("Ch2 - Mix 1", 58), | 
 | SINGLE_COEF("Ch2 - Mix 2", 59), | 
 | SINGLE_COEF("Ch3 - Mix 1", 60), | 
 | SINGLE_COEF("Ch3 - Mix 2", 61), | 
 | }; | 
 |  | 
 | static const struct snd_soc_dapm_widget sta32x_dapm_widgets[] = { | 
 | SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0), | 
 | SND_SOC_DAPM_OUTPUT("LEFT"), | 
 | SND_SOC_DAPM_OUTPUT("RIGHT"), | 
 | SND_SOC_DAPM_OUTPUT("SUB"), | 
 | }; | 
 |  | 
 | static const struct snd_soc_dapm_route sta32x_dapm_routes[] = { | 
 | 	{ "LEFT", NULL, "DAC" }, | 
 | 	{ "RIGHT", NULL, "DAC" }, | 
 | 	{ "SUB", NULL, "DAC" }, | 
 | }; | 
 |  | 
 | /* MCLK interpolation ratio per fs */ | 
 | static struct { | 
 | 	int fs; | 
 | 	int ir; | 
 | } interpolation_ratios[] = { | 
 | 	{ 32000, 0 }, | 
 | 	{ 44100, 0 }, | 
 | 	{ 48000, 0 }, | 
 | 	{ 88200, 1 }, | 
 | 	{ 96000, 1 }, | 
 | 	{ 176400, 2 }, | 
 | 	{ 192000, 2 }, | 
 | }; | 
 |  | 
 | /* MCLK to fs clock ratios */ | 
 | static struct { | 
 | 	int ratio; | 
 | 	int mcs; | 
 | } mclk_ratios[3][7] = { | 
 | 	{ { 768, 0 }, { 512, 1 }, { 384, 2 }, { 256, 3 }, | 
 | 	  { 128, 4 }, { 576, 5 }, { 0, 0 } }, | 
 | 	{ { 384, 2 }, { 256, 3 }, { 192, 4 }, { 128, 5 }, {64, 0 }, { 0, 0 } }, | 
 | 	{ { 384, 2 }, { 256, 3 }, { 192, 4 }, { 128, 5 }, {64, 0 }, { 0, 0 } }, | 
 | }; | 
 |  | 
 |  | 
 | /** | 
 |  * sta32x_set_dai_sysclk - configure MCLK | 
 |  * @codec_dai: the codec DAI | 
 |  * @clk_id: the clock ID (ignored) | 
 |  * @freq: the MCLK input frequency | 
 |  * @dir: the clock direction (ignored) | 
 |  * | 
 |  * The value of MCLK is used to determine which sample rates are supported | 
 |  * by the STA32X, based on the mclk_ratios table. | 
 |  * | 
 |  * This function must be called by the machine driver's 'startup' function, | 
 |  * otherwise the list of supported sample rates will not be available in | 
 |  * time for ALSA. | 
 |  * | 
 |  * For setups with variable MCLKs, pass 0 as 'freq' argument. This will cause | 
 |  * theoretically possible sample rates to be enabled. Call it again with a | 
 |  * proper value set one the external clock is set (most probably you would do | 
 |  * that from a machine's driver 'hw_param' hook. | 
 |  */ | 
 | static int sta32x_set_dai_sysclk(struct snd_soc_dai *codec_dai, | 
 | 		int clk_id, unsigned int freq, int dir) | 
 | { | 
 | 	struct snd_soc_codec *codec = codec_dai->codec; | 
 | 	struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec); | 
 | 	int i, j, ir, fs; | 
 | 	unsigned int rates = 0; | 
 | 	unsigned int rate_min = -1; | 
 | 	unsigned int rate_max = 0; | 
 |  | 
 | 	pr_debug("mclk=%u\n", freq); | 
 | 	sta32x->mclk = freq; | 
 |  | 
 | 	if (sta32x->mclk) { | 
 | 		for (i = 0; i < ARRAY_SIZE(interpolation_ratios); i++) { | 
 | 			ir = interpolation_ratios[i].ir; | 
 | 			fs = interpolation_ratios[i].fs; | 
 | 			for (j = 0; mclk_ratios[ir][j].ratio; j++) { | 
 | 				if (mclk_ratios[ir][j].ratio * fs == freq) { | 
 | 					rates |= snd_pcm_rate_to_rate_bit(fs); | 
 | 					if (fs < rate_min) | 
 | 						rate_min = fs; | 
 | 					if (fs > rate_max) | 
 | 						rate_max = fs; | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 		/* FIXME: soc should support a rate list */ | 
 | 		rates &= ~SNDRV_PCM_RATE_KNOT; | 
 |  | 
 | 		if (!rates) { | 
 | 			dev_err(codec->dev, "could not find a valid sample rate\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} else { | 
 | 		/* enable all possible rates */ | 
 | 		rates = STA32X_RATES; | 
 | 		rate_min = 32000; | 
 | 		rate_max = 192000; | 
 | 	} | 
 |  | 
 | 	codec_dai->driver->playback.rates = rates; | 
 | 	codec_dai->driver->playback.rate_min = rate_min; | 
 | 	codec_dai->driver->playback.rate_max = rate_max; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * sta32x_set_dai_fmt - configure the codec for the selected audio format | 
 |  * @codec_dai: the codec DAI | 
 |  * @fmt: a SND_SOC_DAIFMT_x value indicating the data format | 
 |  * | 
 |  * This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the | 
 |  * codec accordingly. | 
 |  */ | 
 | static int sta32x_set_dai_fmt(struct snd_soc_dai *codec_dai, | 
 | 			      unsigned int fmt) | 
 | { | 
 | 	struct snd_soc_codec *codec = codec_dai->codec; | 
 | 	struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec); | 
 | 	u8 confb = snd_soc_read(codec, STA32X_CONFB); | 
 |  | 
 | 	pr_debug("\n"); | 
 | 	confb &= ~(STA32X_CONFB_C1IM | STA32X_CONFB_C2IM); | 
 |  | 
 | 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { | 
 | 	case SND_SOC_DAIFMT_CBS_CFS: | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | 
 | 	case SND_SOC_DAIFMT_I2S: | 
 | 	case SND_SOC_DAIFMT_RIGHT_J: | 
 | 	case SND_SOC_DAIFMT_LEFT_J: | 
 | 		sta32x->format = fmt & SND_SOC_DAIFMT_FORMAT_MASK; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | 
 | 	case SND_SOC_DAIFMT_NB_NF: | 
 | 		confb |= STA32X_CONFB_C2IM; | 
 | 		break; | 
 | 	case SND_SOC_DAIFMT_NB_IF: | 
 | 		confb |= STA32X_CONFB_C1IM; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	snd_soc_write(codec, STA32X_CONFB, confb); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * sta32x_hw_params - program the STA32X with the given hardware parameters. | 
 |  * @substream: the audio stream | 
 |  * @params: the hardware parameters to set | 
 |  * @dai: the SOC DAI (ignored) | 
 |  * | 
 |  * This function programs the hardware with the values provided. | 
 |  * Specifically, the sample rate and the data format. | 
 |  */ | 
 | static int sta32x_hw_params(struct snd_pcm_substream *substream, | 
 | 			    struct snd_pcm_hw_params *params, | 
 | 			    struct snd_soc_dai *dai) | 
 | { | 
 | 	struct snd_soc_pcm_runtime *rtd = substream->private_data; | 
 | 	struct snd_soc_codec *codec = rtd->codec; | 
 | 	struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec); | 
 | 	unsigned int rate; | 
 | 	int i, mcs = -1, ir = -1; | 
 | 	u8 confa, confb; | 
 |  | 
 | 	rate = params_rate(params); | 
 | 	pr_debug("rate: %u\n", rate); | 
 | 	for (i = 0; i < ARRAY_SIZE(interpolation_ratios); i++) | 
 | 		if (interpolation_ratios[i].fs == rate) { | 
 | 			ir = interpolation_ratios[i].ir; | 
 | 			break; | 
 | 		} | 
 | 	if (ir < 0) | 
 | 		return -EINVAL; | 
 | 	for (i = 0; mclk_ratios[ir][i].ratio; i++) | 
 | 		if (mclk_ratios[ir][i].ratio * rate == sta32x->mclk) { | 
 | 			mcs = mclk_ratios[ir][i].mcs; | 
 | 			break; | 
 | 		} | 
 | 	if (mcs < 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	confa = snd_soc_read(codec, STA32X_CONFA); | 
 | 	confa &= ~(STA32X_CONFA_MCS_MASK | STA32X_CONFA_IR_MASK); | 
 | 	confa |= (ir << STA32X_CONFA_IR_SHIFT) | (mcs << STA32X_CONFA_MCS_SHIFT); | 
 |  | 
 | 	confb = snd_soc_read(codec, STA32X_CONFB); | 
 | 	confb &= ~(STA32X_CONFB_SAI_MASK | STA32X_CONFB_SAIFB); | 
 | 	switch (params_format(params)) { | 
 | 	case SNDRV_PCM_FORMAT_S24_LE: | 
 | 	case SNDRV_PCM_FORMAT_S24_BE: | 
 | 	case SNDRV_PCM_FORMAT_S24_3LE: | 
 | 	case SNDRV_PCM_FORMAT_S24_3BE: | 
 | 		pr_debug("24bit\n"); | 
 | 		/* fall through */ | 
 | 	case SNDRV_PCM_FORMAT_S32_LE: | 
 | 	case SNDRV_PCM_FORMAT_S32_BE: | 
 | 		pr_debug("24bit or 32bit\n"); | 
 | 		switch (sta32x->format) { | 
 | 		case SND_SOC_DAIFMT_I2S: | 
 | 			confb |= 0x0; | 
 | 			break; | 
 | 		case SND_SOC_DAIFMT_LEFT_J: | 
 | 			confb |= 0x1; | 
 | 			break; | 
 | 		case SND_SOC_DAIFMT_RIGHT_J: | 
 | 			confb |= 0x2; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		break; | 
 | 	case SNDRV_PCM_FORMAT_S20_3LE: | 
 | 	case SNDRV_PCM_FORMAT_S20_3BE: | 
 | 		pr_debug("20bit\n"); | 
 | 		switch (sta32x->format) { | 
 | 		case SND_SOC_DAIFMT_I2S: | 
 | 			confb |= 0x4; | 
 | 			break; | 
 | 		case SND_SOC_DAIFMT_LEFT_J: | 
 | 			confb |= 0x5; | 
 | 			break; | 
 | 		case SND_SOC_DAIFMT_RIGHT_J: | 
 | 			confb |= 0x6; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		break; | 
 | 	case SNDRV_PCM_FORMAT_S18_3LE: | 
 | 	case SNDRV_PCM_FORMAT_S18_3BE: | 
 | 		pr_debug("18bit\n"); | 
 | 		switch (sta32x->format) { | 
 | 		case SND_SOC_DAIFMT_I2S: | 
 | 			confb |= 0x8; | 
 | 			break; | 
 | 		case SND_SOC_DAIFMT_LEFT_J: | 
 | 			confb |= 0x9; | 
 | 			break; | 
 | 		case SND_SOC_DAIFMT_RIGHT_J: | 
 | 			confb |= 0xa; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		break; | 
 | 	case SNDRV_PCM_FORMAT_S16_LE: | 
 | 	case SNDRV_PCM_FORMAT_S16_BE: | 
 | 		pr_debug("16bit\n"); | 
 | 		switch (sta32x->format) { | 
 | 		case SND_SOC_DAIFMT_I2S: | 
 | 			confb |= 0x0; | 
 | 			break; | 
 | 		case SND_SOC_DAIFMT_LEFT_J: | 
 | 			confb |= 0xd; | 
 | 			break; | 
 | 		case SND_SOC_DAIFMT_RIGHT_J: | 
 | 			confb |= 0xe; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	snd_soc_write(codec, STA32X_CONFA, confa); | 
 | 	snd_soc_write(codec, STA32X_CONFB, confb); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * sta32x_set_bias_level - DAPM callback | 
 |  * @codec: the codec device | 
 |  * @level: DAPM power level | 
 |  * | 
 |  * This is called by ALSA to put the codec into low power mode | 
 |  * or to wake it up.  If the codec is powered off completely | 
 |  * all registers must be restored after power on. | 
 |  */ | 
 | static int sta32x_set_bias_level(struct snd_soc_codec *codec, | 
 | 				 enum snd_soc_bias_level level) | 
 | { | 
 | 	int ret; | 
 | 	struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec); | 
 |  | 
 | 	pr_debug("level = %d\n", level); | 
 | 	switch (level) { | 
 | 	case SND_SOC_BIAS_ON: | 
 | 		break; | 
 |  | 
 | 	case SND_SOC_BIAS_PREPARE: | 
 | 		/* Full power on */ | 
 | 		snd_soc_update_bits(codec, STA32X_CONFF, | 
 | 				    STA32X_CONFF_PWDN | STA32X_CONFF_EAPD, | 
 | 				    STA32X_CONFF_PWDN | STA32X_CONFF_EAPD); | 
 | 		break; | 
 |  | 
 | 	case SND_SOC_BIAS_STANDBY: | 
 | 		if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { | 
 | 			ret = regulator_bulk_enable(ARRAY_SIZE(sta32x->supplies), | 
 | 						    sta32x->supplies); | 
 | 			if (ret != 0) { | 
 | 				dev_err(codec->dev, | 
 | 					"Failed to enable supplies: %d\n", ret); | 
 | 				return ret; | 
 | 			} | 
 |  | 
 | 			snd_soc_cache_sync(codec); | 
 | 		} | 
 |  | 
 | 		/* Power up to mute */ | 
 | 		/* FIXME */ | 
 | 		snd_soc_update_bits(codec, STA32X_CONFF, | 
 | 				    STA32X_CONFF_PWDN | STA32X_CONFF_EAPD, | 
 | 				    STA32X_CONFF_PWDN | STA32X_CONFF_EAPD); | 
 |  | 
 | 		break; | 
 |  | 
 | 	case SND_SOC_BIAS_OFF: | 
 | 		/* The chip runs through the power down sequence for us. */ | 
 | 		snd_soc_update_bits(codec, STA32X_CONFF, | 
 | 				    STA32X_CONFF_PWDN | STA32X_CONFF_EAPD, | 
 | 				    STA32X_CONFF_PWDN); | 
 | 		msleep(300); | 
 |  | 
 | 		regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), | 
 | 				       sta32x->supplies); | 
 | 		break; | 
 | 	} | 
 | 	codec->dapm.bias_level = level; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct snd_soc_dai_ops sta32x_dai_ops = { | 
 | 	.hw_params	= sta32x_hw_params, | 
 | 	.set_sysclk	= sta32x_set_dai_sysclk, | 
 | 	.set_fmt	= sta32x_set_dai_fmt, | 
 | }; | 
 |  | 
 | static struct snd_soc_dai_driver sta32x_dai = { | 
 | 	.name = "STA32X", | 
 | 	.playback = { | 
 | 		.stream_name = "Playback", | 
 | 		.channels_min = 2, | 
 | 		.channels_max = 2, | 
 | 		.rates = STA32X_RATES, | 
 | 		.formats = STA32X_FORMATS, | 
 | 	}, | 
 | 	.ops = &sta32x_dai_ops, | 
 | }; | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int sta32x_suspend(struct snd_soc_codec *codec, pm_message_t state) | 
 | { | 
 | 	sta32x_set_bias_level(codec, SND_SOC_BIAS_OFF); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sta32x_resume(struct snd_soc_codec *codec) | 
 | { | 
 | 	sta32x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); | 
 | 	return 0; | 
 | } | 
 | #else | 
 | #define sta32x_suspend NULL | 
 | #define sta32x_resume NULL | 
 | #endif | 
 |  | 
 | static int sta32x_probe(struct snd_soc_codec *codec) | 
 | { | 
 | 	struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec); | 
 | 	int i, ret = 0; | 
 |  | 
 | 	sta32x->codec = codec; | 
 |  | 
 | 	/* regulators */ | 
 | 	for (i = 0; i < ARRAY_SIZE(sta32x->supplies); i++) | 
 | 		sta32x->supplies[i].supply = sta32x_supply_names[i]; | 
 |  | 
 | 	ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sta32x->supplies), | 
 | 				 sta32x->supplies); | 
 | 	if (ret != 0) { | 
 | 		dev_err(codec->dev, "Failed to request supplies: %d\n", ret); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	ret = regulator_bulk_enable(ARRAY_SIZE(sta32x->supplies), | 
 | 				    sta32x->supplies); | 
 | 	if (ret != 0) { | 
 | 		dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); | 
 | 		goto err_get; | 
 | 	} | 
 |  | 
 | 	/* Tell ASoC what kind of I/O to use to read the registers.  ASoC will | 
 | 	 * then do the I2C transactions itself. | 
 | 	 */ | 
 | 	ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_I2C); | 
 | 	if (ret < 0) { | 
 | 		dev_err(codec->dev, "failed to set cache I/O (ret=%i)\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* Chip documentation explicitly requires that the reset values | 
 | 	 * of reserved register bits are left untouched. | 
 | 	 * Write the register default value to cache for reserved registers, | 
 | 	 * so the write to the these registers are suppressed by the cache | 
 | 	 * restore code when it skips writes of default registers. | 
 | 	 */ | 
 | 	snd_soc_cache_write(codec, STA32X_CONFC, 0xc2); | 
 | 	snd_soc_cache_write(codec, STA32X_CONFE, 0xc2); | 
 | 	snd_soc_cache_write(codec, STA32X_CONFF, 0x5c); | 
 | 	snd_soc_cache_write(codec, STA32X_MMUTE, 0x10); | 
 | 	snd_soc_cache_write(codec, STA32X_AUTO1, 0x60); | 
 | 	snd_soc_cache_write(codec, STA32X_AUTO3, 0x00); | 
 | 	snd_soc_cache_write(codec, STA32X_C3CFG, 0x40); | 
 |  | 
 | 	/* FIXME enable thermal warning adjustment and recovery  */ | 
 | 	snd_soc_update_bits(codec, STA32X_CONFA, | 
 | 			    STA32X_CONFA_TWAB | STA32X_CONFA_TWRB, 0); | 
 |  | 
 | 	/* FIXME select 2.1 mode  */ | 
 | 	snd_soc_update_bits(codec, STA32X_CONFF, | 
 | 			    STA32X_CONFF_OCFG_MASK, | 
 | 			    1 << STA32X_CONFF_OCFG_SHIFT); | 
 |  | 
 | 	/* FIXME channel to output mapping */ | 
 | 	snd_soc_update_bits(codec, STA32X_C1CFG, | 
 | 			    STA32X_CxCFG_OM_MASK, | 
 | 			    0 << STA32X_CxCFG_OM_SHIFT); | 
 | 	snd_soc_update_bits(codec, STA32X_C2CFG, | 
 | 			    STA32X_CxCFG_OM_MASK, | 
 | 			    1 << STA32X_CxCFG_OM_SHIFT); | 
 | 	snd_soc_update_bits(codec, STA32X_C3CFG, | 
 | 			    STA32X_CxCFG_OM_MASK, | 
 | 			    2 << STA32X_CxCFG_OM_SHIFT); | 
 |  | 
 | 	sta32x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); | 
 | 	/* Bias level configuration will have done an extra enable */ | 
 | 	regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_get: | 
 | 	regulator_bulk_free(ARRAY_SIZE(sta32x->supplies), sta32x->supplies); | 
 | err: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int sta32x_remove(struct snd_soc_codec *codec) | 
 | { | 
 | 	struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec); | 
 |  | 
 | 	sta32x_set_bias_level(codec, SND_SOC_BIAS_OFF); | 
 | 	regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies); | 
 | 	regulator_bulk_free(ARRAY_SIZE(sta32x->supplies), sta32x->supplies); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sta32x_reg_is_volatile(struct snd_soc_codec *codec, | 
 | 				  unsigned int reg) | 
 | { | 
 | 	switch (reg) { | 
 | 	case STA32X_CONFA ... STA32X_L2ATRT: | 
 | 	case STA32X_MPCC1 ... STA32X_FDRC2: | 
 | 		return 0; | 
 | 	} | 
 | 	return 1; | 
 | } | 
 |  | 
 | static const struct snd_soc_codec_driver sta32x_codec = { | 
 | 	.probe =		sta32x_probe, | 
 | 	.remove =		sta32x_remove, | 
 | 	.suspend =		sta32x_suspend, | 
 | 	.resume =		sta32x_resume, | 
 | 	.reg_cache_size =	STA32X_REGISTER_COUNT, | 
 | 	.reg_word_size =	sizeof(u8), | 
 | 	.reg_cache_default =	sta32x_regs, | 
 | 	.volatile_register =	sta32x_reg_is_volatile, | 
 | 	.set_bias_level =	sta32x_set_bias_level, | 
 | 	.controls =		sta32x_snd_controls, | 
 | 	.num_controls =		ARRAY_SIZE(sta32x_snd_controls), | 
 | 	.dapm_widgets =		sta32x_dapm_widgets, | 
 | 	.num_dapm_widgets =	ARRAY_SIZE(sta32x_dapm_widgets), | 
 | 	.dapm_routes =		sta32x_dapm_routes, | 
 | 	.num_dapm_routes =	ARRAY_SIZE(sta32x_dapm_routes), | 
 | }; | 
 |  | 
 | static __devinit int sta32x_i2c_probe(struct i2c_client *i2c, | 
 | 				      const struct i2c_device_id *id) | 
 | { | 
 | 	struct sta32x_priv *sta32x; | 
 | 	int ret; | 
 |  | 
 | 	sta32x = kzalloc(sizeof(struct sta32x_priv), GFP_KERNEL); | 
 | 	if (!sta32x) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	i2c_set_clientdata(i2c, sta32x); | 
 |  | 
 | 	ret = snd_soc_register_codec(&i2c->dev, &sta32x_codec, &sta32x_dai, 1); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&i2c->dev, "Failed to register codec (%d)\n", ret); | 
 | 		kfree(sta32x); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static __devexit int sta32x_i2c_remove(struct i2c_client *client) | 
 | { | 
 | 	struct sta32x_priv *sta32x = i2c_get_clientdata(client); | 
 |  | 
 | 	snd_soc_unregister_codec(&client->dev); | 
 | 	kfree(sta32x); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id sta32x_i2c_id[] = { | 
 | 	{ "sta326", 0 }, | 
 | 	{ "sta328", 0 }, | 
 | 	{ "sta329", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, sta32x_i2c_id); | 
 |  | 
 | static struct i2c_driver sta32x_i2c_driver = { | 
 | 	.driver = { | 
 | 		.name = "sta32x", | 
 | 		.owner = THIS_MODULE, | 
 | 	}, | 
 | 	.probe =    sta32x_i2c_probe, | 
 | 	.remove =   __devexit_p(sta32x_i2c_remove), | 
 | 	.id_table = sta32x_i2c_id, | 
 | }; | 
 |  | 
 | static int __init sta32x_init(void) | 
 | { | 
 | 	return i2c_add_driver(&sta32x_i2c_driver); | 
 | } | 
 | module_init(sta32x_init); | 
 |  | 
 | static void __exit sta32x_exit(void) | 
 | { | 
 | 	i2c_del_driver(&sta32x_i2c_driver); | 
 | } | 
 | module_exit(sta32x_exit); | 
 |  | 
 | MODULE_DESCRIPTION("ASoC STA32X driver"); | 
 | MODULE_AUTHOR("Johannes Stezenbach <js@sig21.net>"); | 
 | MODULE_LICENSE("GPL"); |