|  | /* | 
|  | * USB | 
|  | */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/dma-mapping.h> | 
|  |  | 
|  | #include <linux/usb/musb.h> | 
|  | #include <linux/usb/otg.h> | 
|  |  | 
|  | #include <mach/common.h> | 
|  | #include <mach/hardware.h> | 
|  | #include <mach/irqs.h> | 
|  |  | 
|  | #define DAVINCI_USB_OTG_BASE 0x01C64000 | 
|  |  | 
|  | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) | 
|  | static struct musb_hdrc_eps_bits musb_eps[] = { | 
|  | { "ep1_tx", 8, }, | 
|  | { "ep1_rx", 8, }, | 
|  | { "ep2_tx", 8, }, | 
|  | { "ep2_rx", 8, }, | 
|  | { "ep3_tx", 5, }, | 
|  | { "ep3_rx", 5, }, | 
|  | { "ep4_tx", 5, }, | 
|  | { "ep4_rx", 5, }, | 
|  | }; | 
|  |  | 
|  | static struct musb_hdrc_config musb_config = { | 
|  | .multipoint	= true, | 
|  | .dyn_fifo	= true, | 
|  | .soft_con	= true, | 
|  | .dma		= true, | 
|  |  | 
|  | .num_eps	= 5, | 
|  | .dma_channels	= 8, | 
|  | .ram_bits	= 10, | 
|  | .eps_bits	= musb_eps, | 
|  | }; | 
|  |  | 
|  | static struct musb_hdrc_platform_data usb_data = { | 
|  | #if defined(CONFIG_USB_MUSB_OTG) | 
|  | /* OTG requires a Mini-AB connector */ | 
|  | .mode           = MUSB_OTG, | 
|  | #elif defined(CONFIG_USB_MUSB_PERIPHERAL) | 
|  | .mode           = MUSB_PERIPHERAL, | 
|  | #elif defined(CONFIG_USB_MUSB_HOST) | 
|  | .mode           = MUSB_HOST, | 
|  | #endif | 
|  | .clock		= "usb", | 
|  | .config		= &musb_config, | 
|  | }; | 
|  |  | 
|  | static struct resource usb_resources[] = { | 
|  | { | 
|  | /* physical address */ | 
|  | .start          = DAVINCI_USB_OTG_BASE, | 
|  | .end            = DAVINCI_USB_OTG_BASE + 0x5ff, | 
|  | .flags          = IORESOURCE_MEM, | 
|  | }, | 
|  | { | 
|  | .start          = IRQ_USBINT, | 
|  | .flags          = IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static u64 usb_dmamask = DMA_BIT_MASK(32); | 
|  |  | 
|  | static struct platform_device usb_dev = { | 
|  | .name           = "musb_hdrc", | 
|  | .id             = -1, | 
|  | .dev = { | 
|  | .platform_data		= &usb_data, | 
|  | .dma_mask		= &usb_dmamask, | 
|  | .coherent_dma_mask      = DMA_BIT_MASK(32), | 
|  | }, | 
|  | .resource       = usb_resources, | 
|  | .num_resources  = ARRAY_SIZE(usb_resources), | 
|  | }; | 
|  |  | 
|  | void __init setup_usb(unsigned mA, unsigned potpgt_msec) | 
|  | { | 
|  | usb_data.power = mA / 2; | 
|  | usb_data.potpgt = potpgt_msec / 2; | 
|  | platform_device_register(&usb_dev); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | void __init setup_usb(unsigned mA, unsigned potpgt_msec) | 
|  | { | 
|  | } | 
|  |  | 
|  | #endif  /* CONFIG_USB_MUSB_HDRC */ | 
|  |  |