|  | /* | 
|  | *  linux/arch/arm/mach-mmp/aspenite.c | 
|  | * | 
|  | *  Support for the Marvell PXA168-based Aspenite and Zylonite2 | 
|  | *  Development Platform. | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License version 2 as | 
|  | *  publishhed by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/smc91x.h> | 
|  |  | 
|  | #include <asm/mach-types.h> | 
|  | #include <asm/mach/arch.h> | 
|  | #include <mach/addr-map.h> | 
|  | #include <mach/mfp-pxa168.h> | 
|  | #include <mach/pxa168.h> | 
|  | #include <mach/gpio.h> | 
|  |  | 
|  | #include "common.h" | 
|  |  | 
|  | static unsigned long common_pin_config[] __initdata = { | 
|  | /* Data Flash Interface */ | 
|  | GPIO0_DFI_D15, | 
|  | GPIO1_DFI_D14, | 
|  | GPIO2_DFI_D13, | 
|  | GPIO3_DFI_D12, | 
|  | GPIO4_DFI_D11, | 
|  | GPIO5_DFI_D10, | 
|  | GPIO6_DFI_D9, | 
|  | GPIO7_DFI_D8, | 
|  | GPIO8_DFI_D7, | 
|  | GPIO9_DFI_D6, | 
|  | GPIO10_DFI_D5, | 
|  | GPIO11_DFI_D4, | 
|  | GPIO12_DFI_D3, | 
|  | GPIO13_DFI_D2, | 
|  | GPIO14_DFI_D1, | 
|  | GPIO15_DFI_D0, | 
|  |  | 
|  | /* Static Memory Controller */ | 
|  | GPIO18_SMC_nCS0, | 
|  | GPIO34_SMC_nCS1, | 
|  | GPIO23_SMC_nLUA, | 
|  | GPIO25_SMC_nLLA, | 
|  | GPIO28_SMC_RDY, | 
|  | GPIO29_SMC_SCLK, | 
|  | GPIO35_SMC_BE1, | 
|  | GPIO36_SMC_BE2, | 
|  | GPIO27_GPIO,	/* Ethernet IRQ */ | 
|  |  | 
|  | /* UART1 */ | 
|  | GPIO107_UART1_RXD, | 
|  | GPIO108_UART1_TXD, | 
|  | }; | 
|  |  | 
|  | static struct smc91x_platdata smc91x_info = { | 
|  | .flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT, | 
|  | }; | 
|  |  | 
|  | static struct resource smc91x_resources[] = { | 
|  | [0] = { | 
|  | .start	= SMC_CS1_PHYS_BASE + 0x300, | 
|  | .end	= SMC_CS1_PHYS_BASE + 0xfffff, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .start	= gpio_to_irq(27), | 
|  | .end	= gpio_to_irq(27), | 
|  | .flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static struct platform_device smc91x_device = { | 
|  | .name		= "smc91x", | 
|  | .id		= 0, | 
|  | .dev		= { | 
|  | .platform_data = &smc91x_info, | 
|  | }, | 
|  | .num_resources	= ARRAY_SIZE(smc91x_resources), | 
|  | .resource	= smc91x_resources, | 
|  | }; | 
|  |  | 
|  | static void __init common_init(void) | 
|  | { | 
|  | mfp_config(ARRAY_AND_SIZE(common_pin_config)); | 
|  |  | 
|  | /* on-chip devices */ | 
|  | pxa168_add_uart(1); | 
|  |  | 
|  | /* off-chip devices */ | 
|  | platform_device_register(&smc91x_device); | 
|  | } | 
|  |  | 
|  | MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") | 
|  | .phys_io        = APB_PHYS_BASE, | 
|  | .boot_params    = 0x00000100, | 
|  | .io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc, | 
|  | .map_io		= pxa_map_io, | 
|  | .init_irq       = pxa168_init_irq, | 
|  | .timer          = &pxa168_timer, | 
|  | .init_machine   = common_init, | 
|  | MACHINE_END | 
|  |  | 
|  | MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") | 
|  | .phys_io        = APB_PHYS_BASE, | 
|  | .boot_params    = 0x00000100, | 
|  | .io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc, | 
|  | .map_io		= pxa_map_io, | 
|  | .init_irq       = pxa168_init_irq, | 
|  | .timer          = &pxa168_timer, | 
|  | .init_machine   = common_init, | 
|  | MACHINE_END |