|  | /* | 
|  | * linux/arch/arm/mach-omap2/board-rx51.c | 
|  | * | 
|  | * Copyright (C) 2007, 2008 Nokia | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/gpio.h> | 
|  |  | 
|  | #include <mach/hardware.h> | 
|  | #include <asm/mach-types.h> | 
|  | #include <asm/mach/arch.h> | 
|  | #include <asm/mach/map.h> | 
|  |  | 
|  | #include <mach/mcspi.h> | 
|  | #include <mach/mux.h> | 
|  | #include <mach/board.h> | 
|  | #include <mach/common.h> | 
|  | #include <mach/keypad.h> | 
|  | #include <mach/dma.h> | 
|  | #include <mach/gpmc.h> | 
|  | #include <mach/usb.h> | 
|  |  | 
|  | static struct omap_uart_config rx51_uart_config = { | 
|  | .enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)), | 
|  | }; | 
|  |  | 
|  | static struct omap_lcd_config rx51_lcd_config = { | 
|  | .ctrl_name	= "internal", | 
|  | }; | 
|  |  | 
|  | static struct omap_fbmem_config rx51_fbmem0_config = { | 
|  | .size = 752 * 1024, | 
|  | }; | 
|  |  | 
|  | static struct omap_fbmem_config rx51_fbmem1_config = { | 
|  | .size = 752 * 1024, | 
|  | }; | 
|  |  | 
|  | static struct omap_fbmem_config rx51_fbmem2_config = { | 
|  | .size = 752 * 1024, | 
|  | }; | 
|  |  | 
|  | static struct omap_board_config_kernel rx51_config[] = { | 
|  | { OMAP_TAG_UART,	&rx51_uart_config }, | 
|  | { OMAP_TAG_FBMEM,	&rx51_fbmem0_config }, | 
|  | { OMAP_TAG_FBMEM,	&rx51_fbmem1_config }, | 
|  | { OMAP_TAG_FBMEM,	&rx51_fbmem2_config }, | 
|  | { OMAP_TAG_LCD,		&rx51_lcd_config }, | 
|  | }; | 
|  |  | 
|  | static void __init rx51_init_irq(void) | 
|  | { | 
|  | omap2_init_common_hw(NULL); | 
|  | omap_init_irq(); | 
|  | omap_gpio_init(); | 
|  | } | 
|  |  | 
|  | extern void __init rx51_peripherals_init(void); | 
|  |  | 
|  | static void __init rx51_init(void) | 
|  | { | 
|  | omap_board_config = rx51_config; | 
|  | omap_board_config_size = ARRAY_SIZE(rx51_config); | 
|  | omap_serial_init(); | 
|  | usb_musb_init(); | 
|  | rx51_peripherals_init(); | 
|  | } | 
|  |  | 
|  | static void __init rx51_map_io(void) | 
|  | { | 
|  | omap2_set_globals_343x(); | 
|  | omap2_map_common_io(); | 
|  | } | 
|  |  | 
|  | MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") | 
|  | /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ | 
|  | .phys_io	= 0x48000000, | 
|  | .io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc, | 
|  | .boot_params	= 0x80000100, | 
|  | .map_io		= rx51_map_io, | 
|  | .init_irq	= rx51_init_irq, | 
|  | .init_machine	= rx51_init, | 
|  | .timer		= &omap_timer, | 
|  | MACHINE_END |