|  | /* | 
|  | * | 
|  | * Common boot and setup code. | 
|  | * | 
|  | * Copyright (C) 2001 PPC64 Team, IBM Corp | 
|  | * | 
|  | *      This program is free software; you can redistribute it and/or | 
|  | *      modify it under the terms of the GNU General Public License | 
|  | *      as published by the Free Software Foundation; either version | 
|  | *      2 of the License, or (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #undef DEBUG | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/initrd.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/console.h> | 
|  | #include <linux/utsname.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/root_dev.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/unistd.h> | 
|  | #include <linux/serial.h> | 
|  | #include <linux/serial_8250.h> | 
|  | #include <linux/bootmem.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/lockdep.h> | 
|  | #include <linux/lmb.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/kdump.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/processor.h> | 
|  | #include <asm/pgtable.h> | 
|  | #include <asm/smp.h> | 
|  | #include <asm/elf.h> | 
|  | #include <asm/machdep.h> | 
|  | #include <asm/paca.h> | 
|  | #include <asm/time.h> | 
|  | #include <asm/cputable.h> | 
|  | #include <asm/sections.h> | 
|  | #include <asm/btext.h> | 
|  | #include <asm/nvram.h> | 
|  | #include <asm/setup.h> | 
|  | #include <asm/system.h> | 
|  | #include <asm/rtas.h> | 
|  | #include <asm/iommu.h> | 
|  | #include <asm/serial.h> | 
|  | #include <asm/cache.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/mmu.h> | 
|  | #include <asm/firmware.h> | 
|  | #include <asm/xmon.h> | 
|  | #include <asm/udbg.h> | 
|  | #include <asm/kexec.h> | 
|  |  | 
|  | #include "setup.h" | 
|  |  | 
|  | #ifdef DEBUG | 
|  | #define DBG(fmt...) udbg_printf(fmt) | 
|  | #else | 
|  | #define DBG(fmt...) | 
|  | #endif | 
|  |  | 
|  | int boot_cpuid = 0; | 
|  | u64 ppc64_pft_size; | 
|  |  | 
|  | /* Pick defaults since we might want to patch instructions | 
|  | * before we've read this from the device tree. | 
|  | */ | 
|  | struct ppc64_caches ppc64_caches = { | 
|  | .dline_size = 0x40, | 
|  | .log_dline_size = 6, | 
|  | .iline_size = 0x40, | 
|  | .log_iline_size = 6 | 
|  | }; | 
|  | EXPORT_SYMBOL_GPL(ppc64_caches); | 
|  |  | 
|  | /* | 
|  | * These are used in binfmt_elf.c to put aux entries on the stack | 
|  | * for each elf executable being started. | 
|  | */ | 
|  | int dcache_bsize; | 
|  | int icache_bsize; | 
|  | int ucache_bsize; | 
|  |  | 
|  | #ifdef CONFIG_SMP | 
|  |  | 
|  | static int smt_enabled_cmdline; | 
|  |  | 
|  | /* Look for ibm,smt-enabled OF option */ | 
|  | static void check_smt_enabled(void) | 
|  | { | 
|  | struct device_node *dn; | 
|  | const char *smt_option; | 
|  |  | 
|  | /* Allow the command line to overrule the OF option */ | 
|  | if (smt_enabled_cmdline) | 
|  | return; | 
|  |  | 
|  | dn = of_find_node_by_path("/options"); | 
|  |  | 
|  | if (dn) { | 
|  | smt_option = of_get_property(dn, "ibm,smt-enabled", NULL); | 
|  |  | 
|  | if (smt_option) { | 
|  | if (!strcmp(smt_option, "on")) | 
|  | smt_enabled_at_boot = 1; | 
|  | else if (!strcmp(smt_option, "off")) | 
|  | smt_enabled_at_boot = 0; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Look for smt-enabled= cmdline option */ | 
|  | static int __init early_smt_enabled(char *p) | 
|  | { | 
|  | smt_enabled_cmdline = 1; | 
|  |  | 
|  | if (!p) | 
|  | return 0; | 
|  |  | 
|  | if (!strcmp(p, "on") || !strcmp(p, "1")) | 
|  | smt_enabled_at_boot = 1; | 
|  | else if (!strcmp(p, "off") || !strcmp(p, "0")) | 
|  | smt_enabled_at_boot = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | early_param("smt-enabled", early_smt_enabled); | 
|  |  | 
|  | #else | 
|  | #define check_smt_enabled() | 
|  | #endif /* CONFIG_SMP */ | 
|  |  | 
|  | /* Put the paca pointer into r13 and SPRG3 */ | 
|  | void __init setup_paca(int cpu) | 
|  | { | 
|  | local_paca = &paca[cpu]; | 
|  | mtspr(SPRN_SPRG3, local_paca); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Early initialization entry point. This is called by head.S | 
|  | * with MMU translation disabled. We rely on the "feature" of | 
|  | * the CPU that ignores the top 2 bits of the address in real | 
|  | * mode so we can access kernel globals normally provided we | 
|  | * only toy with things in the RMO region. From here, we do | 
|  | * some early parsing of the device-tree to setup out LMB | 
|  | * data structures, and allocate & initialize the hash table | 
|  | * and segment tables so we can start running with translation | 
|  | * enabled. | 
|  | * | 
|  | * It is this function which will call the probe() callback of | 
|  | * the various platform types and copy the matching one to the | 
|  | * global ppc_md structure. Your platform can eventually do | 
|  | * some very early initializations from the probe() routine, but | 
|  | * this is not recommended, be very careful as, for example, the | 
|  | * device-tree is not accessible via normal means at this point. | 
|  | */ | 
|  |  | 
|  | void __init early_setup(unsigned long dt_ptr) | 
|  | { | 
|  | /* -------- printk is _NOT_ safe to use here ! ------- */ | 
|  |  | 
|  | /* Fill in any unititialised pacas */ | 
|  | initialise_pacas(); | 
|  |  | 
|  | /* Identify CPU type */ | 
|  | identify_cpu(0, mfspr(SPRN_PVR)); | 
|  |  | 
|  | /* Assume we're on cpu 0 for now. Don't write to the paca yet! */ | 
|  | setup_paca(0); | 
|  |  | 
|  | /* Initialize lockdep early or else spinlocks will blow */ | 
|  | lockdep_init(); | 
|  |  | 
|  | /* -------- printk is now safe to use ------- */ | 
|  |  | 
|  | /* Enable early debugging if any specified (see udbg.h) */ | 
|  | udbg_early_init(); | 
|  |  | 
|  | DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr); | 
|  |  | 
|  | /* | 
|  | * Do early initialization using the flattened device | 
|  | * tree, such as retrieving the physical memory map or | 
|  | * calculating/retrieving the hash table size. | 
|  | */ | 
|  | early_init_devtree(__va(dt_ptr)); | 
|  |  | 
|  | /* Now we know the logical id of our boot cpu, setup the paca. */ | 
|  | setup_paca(boot_cpuid); | 
|  |  | 
|  | /* Fix up paca fields required for the boot cpu */ | 
|  | get_paca()->cpu_start = 1; | 
|  |  | 
|  | /* Probe the machine type */ | 
|  | probe_machine(); | 
|  |  | 
|  | setup_kdump_trampoline(); | 
|  |  | 
|  | DBG("Found, Initializing memory management...\n"); | 
|  |  | 
|  | /* Initialize the hash table or TLB handling */ | 
|  | early_init_mmu(); | 
|  |  | 
|  | DBG(" <- early_setup()\n"); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SMP | 
|  | void early_setup_secondary(void) | 
|  | { | 
|  | /* Mark interrupts enabled in PACA */ | 
|  | get_paca()->soft_enabled = 0; | 
|  |  | 
|  | /* Initialize the hash table or TLB handling */ | 
|  | early_init_mmu_secondary(); | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_SMP */ | 
|  |  | 
|  | #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) | 
|  | extern unsigned long __secondary_hold_spinloop; | 
|  | extern void generic_secondary_smp_init(void); | 
|  |  | 
|  | void smp_release_cpus(void) | 
|  | { | 
|  | unsigned long *ptr; | 
|  |  | 
|  | DBG(" -> smp_release_cpus()\n"); | 
|  |  | 
|  | /* All secondary cpus are spinning on a common spinloop, release them | 
|  | * all now so they can start to spin on their individual paca | 
|  | * spinloops. For non SMP kernels, the secondary cpus never get out | 
|  | * of the common spinloop. | 
|  | */ | 
|  |  | 
|  | ptr  = (unsigned long *)((unsigned long)&__secondary_hold_spinloop | 
|  | - PHYSICAL_START); | 
|  | *ptr = __pa(generic_secondary_smp_init); | 
|  | mb(); | 
|  |  | 
|  | DBG(" <- smp_release_cpus()\n"); | 
|  | } | 
|  | #endif /* CONFIG_SMP || CONFIG_KEXEC */ | 
|  |  | 
|  | /* | 
|  | * Initialize some remaining members of the ppc64_caches and systemcfg | 
|  | * structures | 
|  | * (at least until we get rid of them completely). This is mostly some | 
|  | * cache informations about the CPU that will be used by cache flush | 
|  | * routines and/or provided to userland | 
|  | */ | 
|  | static void __init initialize_cache_info(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | unsigned long num_cpus = 0; | 
|  |  | 
|  | DBG(" -> initialize_cache_info()\n"); | 
|  |  | 
|  | for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) { | 
|  | num_cpus += 1; | 
|  |  | 
|  | /* We're assuming *all* of the CPUs have the same | 
|  | * d-cache and i-cache sizes... -Peter | 
|  | */ | 
|  |  | 
|  | if ( num_cpus == 1 ) { | 
|  | const u32 *sizep, *lsizep; | 
|  | u32 size, lsize; | 
|  |  | 
|  | size = 0; | 
|  | lsize = cur_cpu_spec->dcache_bsize; | 
|  | sizep = of_get_property(np, "d-cache-size", NULL); | 
|  | if (sizep != NULL) | 
|  | size = *sizep; | 
|  | lsizep = of_get_property(np, "d-cache-block-size", NULL); | 
|  | /* fallback if block size missing */ | 
|  | if (lsizep == NULL) | 
|  | lsizep = of_get_property(np, "d-cache-line-size", NULL); | 
|  | if (lsizep != NULL) | 
|  | lsize = *lsizep; | 
|  | if (sizep == 0 || lsizep == 0) | 
|  | DBG("Argh, can't find dcache properties ! " | 
|  | "sizep: %p, lsizep: %p\n", sizep, lsizep); | 
|  |  | 
|  | ppc64_caches.dsize = size; | 
|  | ppc64_caches.dline_size = lsize; | 
|  | ppc64_caches.log_dline_size = __ilog2(lsize); | 
|  | ppc64_caches.dlines_per_page = PAGE_SIZE / lsize; | 
|  |  | 
|  | size = 0; | 
|  | lsize = cur_cpu_spec->icache_bsize; | 
|  | sizep = of_get_property(np, "i-cache-size", NULL); | 
|  | if (sizep != NULL) | 
|  | size = *sizep; | 
|  | lsizep = of_get_property(np, "i-cache-block-size", NULL); | 
|  | if (lsizep == NULL) | 
|  | lsizep = of_get_property(np, "i-cache-line-size", NULL); | 
|  | if (lsizep != NULL) | 
|  | lsize = *lsizep; | 
|  | if (sizep == 0 || lsizep == 0) | 
|  | DBG("Argh, can't find icache properties ! " | 
|  | "sizep: %p, lsizep: %p\n", sizep, lsizep); | 
|  |  | 
|  | ppc64_caches.isize = size; | 
|  | ppc64_caches.iline_size = lsize; | 
|  | ppc64_caches.log_iline_size = __ilog2(lsize); | 
|  | ppc64_caches.ilines_per_page = PAGE_SIZE / lsize; | 
|  | } | 
|  | } | 
|  |  | 
|  | DBG(" <- initialize_cache_info()\n"); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Do some initial setup of the system.  The parameters are those which | 
|  | * were passed in from the bootloader. | 
|  | */ | 
|  | void __init setup_system(void) | 
|  | { | 
|  | DBG(" -> setup_system()\n"); | 
|  |  | 
|  | /* Apply the CPUs-specific and firmware specific fixups to kernel | 
|  | * text (nop out sections not relevant to this CPU or this firmware) | 
|  | */ | 
|  | do_feature_fixups(cur_cpu_spec->cpu_features, | 
|  | &__start___ftr_fixup, &__stop___ftr_fixup); | 
|  | do_feature_fixups(cur_cpu_spec->mmu_features, | 
|  | &__start___mmu_ftr_fixup, &__stop___mmu_ftr_fixup); | 
|  | do_feature_fixups(powerpc_firmware_features, | 
|  | &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup); | 
|  | do_lwsync_fixups(cur_cpu_spec->cpu_features, | 
|  | &__start___lwsync_fixup, &__stop___lwsync_fixup); | 
|  |  | 
|  | /* | 
|  | * Unflatten the device-tree passed by prom_init or kexec | 
|  | */ | 
|  | unflatten_device_tree(); | 
|  |  | 
|  | /* | 
|  | * Fill the ppc64_caches & systemcfg structures with informations | 
|  | * retrieved from the device-tree. | 
|  | */ | 
|  | initialize_cache_info(); | 
|  |  | 
|  | /* | 
|  | * Initialize irq remapping subsystem | 
|  | */ | 
|  | irq_early_init(); | 
|  |  | 
|  | #ifdef CONFIG_PPC_RTAS | 
|  | /* | 
|  | * Initialize RTAS if available | 
|  | */ | 
|  | rtas_initialize(); | 
|  | #endif /* CONFIG_PPC_RTAS */ | 
|  |  | 
|  | /* | 
|  | * Check if we have an initrd provided via the device-tree | 
|  | */ | 
|  | check_for_initrd(); | 
|  |  | 
|  | /* | 
|  | * Do some platform specific early initializations, that includes | 
|  | * setting up the hash table pointers. It also sets up some interrupt-mapping | 
|  | * related options that will be used by finish_device_tree() | 
|  | */ | 
|  | if (ppc_md.init_early) | 
|  | ppc_md.init_early(); | 
|  |  | 
|  | /* | 
|  | * We can discover serial ports now since the above did setup the | 
|  | * hash table management for us, thus ioremap works. We do that early | 
|  | * so that further code can be debugged | 
|  | */ | 
|  | find_legacy_serial_ports(); | 
|  |  | 
|  | /* | 
|  | * Register early console | 
|  | */ | 
|  | register_early_udbg_console(); | 
|  |  | 
|  | /* | 
|  | * Initialize xmon | 
|  | */ | 
|  | xmon_setup(); | 
|  |  | 
|  | check_smt_enabled(); | 
|  | smp_setup_cpu_maps(); | 
|  |  | 
|  | #ifdef CONFIG_SMP | 
|  | /* Release secondary cpus out of their spinloops at 0x60 now that | 
|  | * we can map physical -> logical CPU ids | 
|  | */ | 
|  | smp_release_cpus(); | 
|  | #endif | 
|  |  | 
|  | printk("Starting Linux PPC64 %s\n", init_utsname()->version); | 
|  |  | 
|  | printk("-----------------------------------------------------\n"); | 
|  | printk("ppc64_pft_size                = 0x%llx\n", ppc64_pft_size); | 
|  | printk("physicalMemorySize            = 0x%llx\n", lmb_phys_mem_size()); | 
|  | if (ppc64_caches.dline_size != 0x80) | 
|  | printk("ppc64_caches.dcache_line_size = 0x%x\n", | 
|  | ppc64_caches.dline_size); | 
|  | if (ppc64_caches.iline_size != 0x80) | 
|  | printk("ppc64_caches.icache_line_size = 0x%x\n", | 
|  | ppc64_caches.iline_size); | 
|  | if (htab_address) | 
|  | printk("htab_address                  = 0x%p\n", htab_address); | 
|  | printk("htab_hash_mask                = 0x%lx\n", htab_hash_mask); | 
|  | if (PHYSICAL_START > 0) | 
|  | printk("physical_start                = 0x%lx\n", | 
|  | PHYSICAL_START); | 
|  | printk("-----------------------------------------------------\n"); | 
|  |  | 
|  | DBG(" <- setup_system()\n"); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IRQSTACKS | 
|  | static void __init irqstack_early_init(void) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | /* | 
|  | * interrupt stacks must be under 256MB, we cannot afford to take | 
|  | * SLB misses on them. | 
|  | */ | 
|  | for_each_possible_cpu(i) { | 
|  | softirq_ctx[i] = (struct thread_info *) | 
|  | __va(lmb_alloc_base(THREAD_SIZE, | 
|  | THREAD_SIZE, 0x10000000)); | 
|  | hardirq_ctx[i] = (struct thread_info *) | 
|  | __va(lmb_alloc_base(THREAD_SIZE, | 
|  | THREAD_SIZE, 0x10000000)); | 
|  | } | 
|  | } | 
|  | #else | 
|  | #define irqstack_early_init() | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Stack space used when we detect a bad kernel stack pointer, and | 
|  | * early in SMP boots before relocation is enabled. | 
|  | */ | 
|  | static void __init emergency_stack_init(void) | 
|  | { | 
|  | unsigned long limit; | 
|  | unsigned int i; | 
|  |  | 
|  | /* | 
|  | * Emergency stacks must be under 256MB, we cannot afford to take | 
|  | * SLB misses on them. The ABI also requires them to be 128-byte | 
|  | * aligned. | 
|  | * | 
|  | * Since we use these as temporary stacks during secondary CPU | 
|  | * bringup, we need to get at them in real mode. This means they | 
|  | * must also be within the RMO region. | 
|  | */ | 
|  | limit = min(0x10000000ULL, lmb.rmo_size); | 
|  |  | 
|  | for_each_possible_cpu(i) { | 
|  | unsigned long sp; | 
|  | sp  = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit); | 
|  | sp += THREAD_SIZE; | 
|  | paca[i].emergency_sp = __va(sp); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called into from start_kernel, after lock_kernel has been called. | 
|  | * Initializes bootmem, which is unsed to manage page allocation until | 
|  | * mem_init is called. | 
|  | */ | 
|  | void __init setup_arch(char **cmdline_p) | 
|  | { | 
|  | ppc64_boot_msg(0x12, "Setup Arch"); | 
|  |  | 
|  | *cmdline_p = cmd_line; | 
|  |  | 
|  | /* | 
|  | * Set cache line size based on type of cpu as a default. | 
|  | * Systems with OF can look in the properties on the cpu node(s) | 
|  | * for a possibly more accurate value. | 
|  | */ | 
|  | dcache_bsize = ppc64_caches.dline_size; | 
|  | icache_bsize = ppc64_caches.iline_size; | 
|  |  | 
|  | /* reboot on panic */ | 
|  | panic_timeout = 180; | 
|  |  | 
|  | if (ppc_md.panic) | 
|  | setup_panic(); | 
|  |  | 
|  | init_mm.start_code = (unsigned long)_stext; | 
|  | init_mm.end_code = (unsigned long) _etext; | 
|  | init_mm.end_data = (unsigned long) _edata; | 
|  | init_mm.brk = klimit; | 
|  |  | 
|  | irqstack_early_init(); | 
|  | emergency_stack_init(); | 
|  |  | 
|  | stabs_alloc(); | 
|  |  | 
|  | /* set up the bootmem stuff with available memory */ | 
|  | do_init_bootmem(); | 
|  | sparse_init(); | 
|  |  | 
|  | #ifdef CONFIG_DUMMY_CONSOLE | 
|  | conswitchp = &dummy_con; | 
|  | #endif | 
|  |  | 
|  | if (ppc_md.setup_arch) | 
|  | ppc_md.setup_arch(); | 
|  |  | 
|  | paging_init(); | 
|  | ppc64_boot_msg(0x15, "Setup Done"); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* ToDo: do something useful if ppc_md is not yet setup. */ | 
|  | #define PPC64_LINUX_FUNCTION 0x0f000000 | 
|  | #define PPC64_IPL_MESSAGE 0xc0000000 | 
|  | #define PPC64_TERM_MESSAGE 0xb0000000 | 
|  |  | 
|  | static void ppc64_do_msg(unsigned int src, const char *msg) | 
|  | { | 
|  | if (ppc_md.progress) { | 
|  | char buf[128]; | 
|  |  | 
|  | sprintf(buf, "%08X\n", src); | 
|  | ppc_md.progress(buf, 0); | 
|  | snprintf(buf, 128, "%s", msg); | 
|  | ppc_md.progress(buf, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Print a boot progress message. */ | 
|  | void ppc64_boot_msg(unsigned int src, const char *msg) | 
|  | { | 
|  | ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_IPL_MESSAGE|src, msg); | 
|  | printk("[boot]%04x %s\n", src, msg); | 
|  | } | 
|  |  | 
|  | void cpu_die(void) | 
|  | { | 
|  | if (ppc_md.cpu_die) | 
|  | ppc_md.cpu_die(); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SMP | 
|  | void __init setup_per_cpu_areas(void) | 
|  | { | 
|  | int i; | 
|  | unsigned long size; | 
|  | char *ptr; | 
|  |  | 
|  | /* Copy section for each CPU (we discard the original) */ | 
|  | size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE); | 
|  | #ifdef CONFIG_MODULES | 
|  | if (size < PERCPU_ENOUGH_ROOM) | 
|  | size = PERCPU_ENOUGH_ROOM; | 
|  | #endif | 
|  |  | 
|  | for_each_possible_cpu(i) { | 
|  | ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size); | 
|  |  | 
|  | paca[i].data_offset = ptr - __per_cpu_start; | 
|  | memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_PPC_INDIRECT_IO | 
|  | struct ppc_pci_io ppc_pci_io; | 
|  | EXPORT_SYMBOL(ppc_pci_io); | 
|  | #endif /* CONFIG_PPC_INDIRECT_IO */ | 
|  |  |