|  | #include <linux/kernel.h> | 
|  | #include <linux/pci.h> | 
|  | #include <asm/pci-direct.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/pci_x86.h> | 
|  |  | 
|  | /* Direct PCI access. This is used for PCI accesses in early boot before | 
|  | the PCI subsystem works. */ | 
|  |  | 
|  | u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset) | 
|  | { | 
|  | u32 v; | 
|  | outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); | 
|  | v = inl(0xcfc); | 
|  | if (v != 0xffffffff) | 
|  | pr_debug("%x reading 4 from %x: %x\n", slot, offset, v); | 
|  | return v; | 
|  | } | 
|  |  | 
|  | u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset) | 
|  | { | 
|  | u8 v; | 
|  | outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); | 
|  | v = inb(0xcfc + (offset&3)); | 
|  | pr_debug("%x reading 1 from %x: %x\n", slot, offset, v); | 
|  | return v; | 
|  | } | 
|  |  | 
|  | u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset) | 
|  | { | 
|  | u16 v; | 
|  | outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); | 
|  | v = inw(0xcfc + (offset&2)); | 
|  | pr_debug("%x reading 2 from %x: %x\n", slot, offset, v); | 
|  | return v; | 
|  | } | 
|  |  | 
|  | void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, | 
|  | u32 val) | 
|  | { | 
|  | pr_debug("%x writing to %x: %x\n", slot, offset, val); | 
|  | outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); | 
|  | outl(val, 0xcfc); | 
|  | } | 
|  |  | 
|  | void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val) | 
|  | { | 
|  | pr_debug("%x writing to %x: %x\n", slot, offset, val); | 
|  | outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); | 
|  | outb(val, 0xcfc + (offset&3)); | 
|  | } | 
|  |  | 
|  | void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val) | 
|  | { | 
|  | pr_debug("%x writing to %x: %x\n", slot, offset, val); | 
|  | outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); | 
|  | outw(val, 0xcfc + (offset&2)); | 
|  | } | 
|  |  | 
|  | int early_pci_allowed(void) | 
|  | { | 
|  | return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) == | 
|  | PCI_PROBE_CONF1; | 
|  | } | 
|  |  | 
|  | void early_dump_pci_device(u8 bus, u8 slot, u8 func) | 
|  | { | 
|  | int i; | 
|  | int j; | 
|  | u32 val; | 
|  |  | 
|  | printk(KERN_INFO "pci 0000:%02x:%02x.%d config space:", | 
|  | bus, slot, func); | 
|  |  | 
|  | for (i = 0; i < 256; i += 4) { | 
|  | if (!(i & 0x0f)) | 
|  | printk("\n  %02x:",i); | 
|  |  | 
|  | val = read_pci_config(bus, slot, func, i); | 
|  | for (j = 0; j < 4; j++) { | 
|  | printk(" %02x", val & 0xff); | 
|  | val >>= 8; | 
|  | } | 
|  | } | 
|  | printk("\n"); | 
|  | } | 
|  |  | 
|  | void early_dump_pci_devices(void) | 
|  | { | 
|  | unsigned bus, slot, func; | 
|  |  | 
|  | if (!early_pci_allowed()) | 
|  | return; | 
|  |  | 
|  | for (bus = 0; bus < 256; bus++) { | 
|  | for (slot = 0; slot < 32; slot++) { | 
|  | for (func = 0; func < 8; func++) { | 
|  | u32 class; | 
|  | u8 type; | 
|  |  | 
|  | class = read_pci_config(bus, slot, func, | 
|  | PCI_CLASS_REVISION); | 
|  | if (class == 0xffffffff) | 
|  | continue; | 
|  |  | 
|  | early_dump_pci_device(bus, slot, func); | 
|  |  | 
|  | if (func == 0) { | 
|  | type = read_pci_config_byte(bus, slot, | 
|  | func, | 
|  | PCI_HEADER_TYPE); | 
|  | if (!(type & 0x80)) | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | } |