|  | /* | 
|  | *    pata_winbond.c - Winbond VLB ATA controllers | 
|  | *	(C) 2006 Red Hat | 
|  | * | 
|  | *    Support for the Winbond 83759A when operating in advanced mode. | 
|  | *    Multichip mode is not currently supported. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/delay.h> | 
|  | #include <scsi/scsi_host.h> | 
|  | #include <linux/libata.h> | 
|  | #include <linux/platform_device.h> | 
|  |  | 
|  | #define DRV_NAME "pata_winbond" | 
|  | #define DRV_VERSION "0.0.3" | 
|  |  | 
|  | #define NR_HOST 4	/* Two winbond controllers, two channels each */ | 
|  |  | 
|  | struct winbond_data { | 
|  | unsigned long config; | 
|  | struct platform_device *platform_dev; | 
|  | }; | 
|  |  | 
|  | static struct ata_host *winbond_host[NR_HOST]; | 
|  | static struct winbond_data winbond_data[NR_HOST]; | 
|  | static int nr_winbond_host; | 
|  |  | 
|  | #ifdef MODULE | 
|  | static int probe_winbond = 1; | 
|  | #else | 
|  | static int probe_winbond; | 
|  | #endif | 
|  |  | 
|  | static DEFINE_SPINLOCK(winbond_lock); | 
|  |  | 
|  | static void winbond_writecfg(unsigned long port, u8 reg, u8 val) | 
|  | { | 
|  | unsigned long flags; | 
|  | spin_lock_irqsave(&winbond_lock, flags); | 
|  | outb(reg, port + 0x01); | 
|  | outb(val, port + 0x02); | 
|  | spin_unlock_irqrestore(&winbond_lock, flags); | 
|  | } | 
|  |  | 
|  | static u8 winbond_readcfg(unsigned long port, u8 reg) | 
|  | { | 
|  | u8 val; | 
|  |  | 
|  | unsigned long flags; | 
|  | spin_lock_irqsave(&winbond_lock, flags); | 
|  | outb(reg, port + 0x01); | 
|  | val = inb(port + 0x02); | 
|  | spin_unlock_irqrestore(&winbond_lock, flags); | 
|  |  | 
|  | return val; | 
|  | } | 
|  |  | 
|  | static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) | 
|  | { | 
|  | struct ata_timing t; | 
|  | struct winbond_data *winbond = ap->host->private_data; | 
|  | int active, recovery; | 
|  | u8 reg; | 
|  | int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2); | 
|  |  | 
|  | reg = winbond_readcfg(winbond->config, 0x81); | 
|  |  | 
|  | /* Get the timing data in cycles */ | 
|  | if (reg & 0x40)		/* Fast VLB bus, assume 50MHz */ | 
|  | ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); | 
|  | else | 
|  | ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); | 
|  |  | 
|  | active = (clamp_val(t.active, 3, 17) - 1) & 0x0F; | 
|  | recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F; | 
|  | timing = (active << 4) | recovery; | 
|  | winbond_writecfg(winbond->config, timing, reg); | 
|  |  | 
|  | /* Load the setup timing */ | 
|  |  | 
|  | reg = 0x35; | 
|  | if (adev->class != ATA_DEV_ATA) | 
|  | reg |= 0x08;	/* FIFO off */ | 
|  | if (!ata_pio_need_iordy(adev)) | 
|  | reg |= 0x02;	/* IORDY off */ | 
|  | reg |= (clamp_val(t.setup, 0, 3) << 6); | 
|  | winbond_writecfg(winbond->config, timing + 1, reg); | 
|  | } | 
|  |  | 
|  |  | 
|  | static unsigned int winbond_data_xfer(struct ata_device *dev, | 
|  | unsigned char *buf, unsigned int buflen, int rw) | 
|  | { | 
|  | struct ata_port *ap = dev->link->ap; | 
|  | int slop = buflen & 3; | 
|  |  | 
|  | if (ata_id_has_dword_io(dev->id)) { | 
|  | if (rw == READ) | 
|  | ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); | 
|  | else | 
|  | iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); | 
|  |  | 
|  | if (unlikely(slop)) { | 
|  | __le32 pad; | 
|  | if (rw == READ) { | 
|  | pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); | 
|  | memcpy(buf + buflen - slop, &pad, slop); | 
|  | } else { | 
|  | memcpy(&pad, buf + buflen - slop, slop); | 
|  | iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); | 
|  | } | 
|  | buflen += 4 - slop; | 
|  | } | 
|  | } else | 
|  | buflen = ata_sff_data_xfer(dev, buf, buflen, rw); | 
|  |  | 
|  | return buflen; | 
|  | } | 
|  |  | 
|  | static struct scsi_host_template winbond_sht = { | 
|  | ATA_PIO_SHT(DRV_NAME), | 
|  | }; | 
|  |  | 
|  | static struct ata_port_operations winbond_port_ops = { | 
|  | .inherits	= &ata_sff_port_ops, | 
|  | .sff_data_xfer	= winbond_data_xfer, | 
|  | .cable_detect	= ata_cable_40wire, | 
|  | .set_piomode	= winbond_set_piomode, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | *	winbond_init_one		-	attach a winbond interface | 
|  | *	@type: Type to display | 
|  | *	@io: I/O port start | 
|  | *	@irq: interrupt line | 
|  | *	@fast: True if on a > 33Mhz VLB | 
|  | * | 
|  | *	Register a VLB bus IDE interface. Such interfaces are PIO and we | 
|  | *	assume do not support IRQ sharing. | 
|  | */ | 
|  |  | 
|  | static __init int winbond_init_one(unsigned long port) | 
|  | { | 
|  | struct platform_device *pdev; | 
|  | u8 reg; | 
|  | int i, rc; | 
|  |  | 
|  | reg = winbond_readcfg(port, 0x81); | 
|  | reg |= 0x80;	/* jumpered mode off */ | 
|  | winbond_writecfg(port, 0x81, reg); | 
|  | reg = winbond_readcfg(port, 0x83); | 
|  | reg |= 0xF0;	/* local control */ | 
|  | winbond_writecfg(port, 0x83, reg); | 
|  | reg = winbond_readcfg(port, 0x85); | 
|  | reg |= 0xF0;	/* programmable timing */ | 
|  | winbond_writecfg(port, 0x85, reg); | 
|  |  | 
|  | reg = winbond_readcfg(port, 0x81); | 
|  |  | 
|  | if (!(reg & 0x03))		/* Disabled */ | 
|  | return -ENODEV; | 
|  |  | 
|  | for (i = 0; i < 2 ; i ++) { | 
|  | unsigned long cmd_port = 0x1F0 - (0x80 * i); | 
|  | unsigned long ctl_port = cmd_port + 0x206; | 
|  | struct ata_host *host; | 
|  | struct ata_port *ap; | 
|  | void __iomem *cmd_addr, *ctl_addr; | 
|  |  | 
|  | if (!(reg & (1 << i))) | 
|  | continue; | 
|  |  | 
|  | pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0); | 
|  | if (IS_ERR(pdev)) | 
|  | return PTR_ERR(pdev); | 
|  |  | 
|  | rc = -ENOMEM; | 
|  | host = ata_host_alloc(&pdev->dev, 1); | 
|  | if (!host) | 
|  | goto err_unregister; | 
|  | ap = host->ports[0]; | 
|  |  | 
|  | rc = -ENOMEM; | 
|  | cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8); | 
|  | ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1); | 
|  | if (!cmd_addr || !ctl_addr) | 
|  | goto err_unregister; | 
|  |  | 
|  | ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port); | 
|  |  | 
|  | ap->ops = &winbond_port_ops; | 
|  | ap->pio_mask = ATA_PIO4; | 
|  | ap->flags |= ATA_FLAG_SLAVE_POSS; | 
|  | ap->ioaddr.cmd_addr = cmd_addr; | 
|  | ap->ioaddr.altstatus_addr = ctl_addr; | 
|  | ap->ioaddr.ctl_addr = ctl_addr; | 
|  | ata_sff_std_ports(&ap->ioaddr); | 
|  |  | 
|  | /* hook in a private data structure per channel */ | 
|  | host->private_data = &winbond_data[nr_winbond_host]; | 
|  | winbond_data[nr_winbond_host].config = port; | 
|  | winbond_data[nr_winbond_host].platform_dev = pdev; | 
|  |  | 
|  | /* activate */ | 
|  | rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0, | 
|  | &winbond_sht); | 
|  | if (rc) | 
|  | goto err_unregister; | 
|  |  | 
|  | winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_unregister: | 
|  | platform_device_unregister(pdev); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	winbond_init		-	attach winbond interfaces | 
|  | * | 
|  | *	Attach winbond IDE interfaces by scanning the ports it may occupy. | 
|  | */ | 
|  |  | 
|  | static __init int winbond_init(void) | 
|  | { | 
|  | static const unsigned long config[2] = { 0x130, 0x1B0 }; | 
|  |  | 
|  | int ct = 0; | 
|  | int i; | 
|  |  | 
|  | if (probe_winbond == 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* | 
|  | *	Check both base addresses | 
|  | */ | 
|  |  | 
|  | for (i = 0; i < 2; i++) { | 
|  | if (probe_winbond & (1<<i)) { | 
|  | int ret = 0; | 
|  | unsigned long port = config[i]; | 
|  |  | 
|  | if (request_region(port, 2, "pata_winbond")) { | 
|  | ret = winbond_init_one(port); | 
|  | if (ret <= 0) | 
|  | release_region(port, 2); | 
|  | else ct+= ret; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (ct != 0) | 
|  | return 0; | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static __exit void winbond_exit(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < nr_winbond_host; i++) { | 
|  | ata_host_detach(winbond_host[i]); | 
|  | release_region(winbond_data[i].config, 2); | 
|  | platform_device_unregister(winbond_data[i].platform_dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | MODULE_AUTHOR("Alan Cox"); | 
|  | MODULE_DESCRIPTION("low-level driver for Winbond VL ATA"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(DRV_VERSION); | 
|  |  | 
|  | module_init(winbond_init); | 
|  | module_exit(winbond_exit); | 
|  |  | 
|  | module_param(probe_winbond, int, 0); | 
|  |  |