|  | /* | 
|  | *	Copyright (C) 2002 Motorola GSG-China | 
|  | * | 
|  | *	This program is free software; you can redistribute it and/or | 
|  | *	modify it under the terms of the GNU General Public License | 
|  | *	as published by the Free Software Foundation; either version 2 | 
|  | *	of the License, or (at your option) any later version. | 
|  | * | 
|  | *	This program is distributed in the hope that it will be useful, | 
|  | *	but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *	GNU General Public License for more details. | 
|  | * | 
|  | *	You should have received a copy of the GNU General Public License | 
|  | *	along with this program; if not, write to the Free Software | 
|  | *	Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, | 
|  | *	USA. | 
|  | * | 
|  | * Author: | 
|  | *	Darius Augulis, Teltonika Inc. | 
|  | * | 
|  | * Desc.: | 
|  | *	Implementation of I2C Adapter/Algorithm Driver | 
|  | *	for I2C Bus integrated in Freescale i.MX/MXC processors | 
|  | * | 
|  | *	Derived from Motorola GSG China I2C example driver | 
|  | * | 
|  | *	Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de | 
|  | *	Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de | 
|  | *	Copyright (C) 2007 RightHand Technologies, Inc. | 
|  | *	Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt> | 
|  | * | 
|  | */ | 
|  |  | 
|  | /** Includes ******************************************************************* | 
|  | *******************************************************************************/ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/clk.h> | 
|  |  | 
|  | #include <mach/irqs.h> | 
|  | #include <mach/hardware.h> | 
|  | #include <mach/i2c.h> | 
|  |  | 
|  | /** Defines ******************************************************************** | 
|  | *******************************************************************************/ | 
|  |  | 
|  | /* This will be the driver name the kernel reports */ | 
|  | #define DRIVER_NAME "imx-i2c" | 
|  |  | 
|  | /* Default value */ | 
|  | #define IMX_I2C_BIT_RATE	100000	/* 100kHz */ | 
|  |  | 
|  | /* IMX I2C registers */ | 
|  | #define IMX_I2C_IADR	0x00	/* i2c slave address */ | 
|  | #define IMX_I2C_IFDR	0x04	/* i2c frequency divider */ | 
|  | #define IMX_I2C_I2CR	0x08	/* i2c control */ | 
|  | #define IMX_I2C_I2SR	0x0C	/* i2c status */ | 
|  | #define IMX_I2C_I2DR	0x10	/* i2c transfer data */ | 
|  |  | 
|  | /* Bits of IMX I2C registers */ | 
|  | #define I2SR_RXAK	0x01 | 
|  | #define I2SR_IIF	0x02 | 
|  | #define I2SR_SRW	0x04 | 
|  | #define I2SR_IAL	0x10 | 
|  | #define I2SR_IBB	0x20 | 
|  | #define I2SR_IAAS	0x40 | 
|  | #define I2SR_ICF	0x80 | 
|  | #define I2CR_RSTA	0x04 | 
|  | #define I2CR_TXAK	0x08 | 
|  | #define I2CR_MTX	0x10 | 
|  | #define I2CR_MSTA	0x20 | 
|  | #define I2CR_IIEN	0x40 | 
|  | #define I2CR_IEN	0x80 | 
|  |  | 
|  | /** Variables ****************************************************************** | 
|  | *******************************************************************************/ | 
|  |  | 
|  | /* | 
|  | * sorted list of clock divider, register value pairs | 
|  | * taken from table 26-5, p.26-9, Freescale i.MX | 
|  | * Integrated Portable System Processor Reference Manual | 
|  | * Document Number: MC9328MXLRM, Rev. 5.1, 06/2007 | 
|  | * | 
|  | * Duplicated divider values removed from list | 
|  | */ | 
|  |  | 
|  | static u16 __initdata i2c_clk_div[50][2] = { | 
|  | { 22,	0x20 }, { 24,	0x21 }, { 26,	0x22 }, { 28,	0x23 }, | 
|  | { 30,	0x00 },	{ 32,	0x24 }, { 36,	0x25 }, { 40,	0x26 }, | 
|  | { 42,	0x03 }, { 44,	0x27 },	{ 48,	0x28 }, { 52,	0x05 }, | 
|  | { 56,	0x29 }, { 60,	0x06 }, { 64,	0x2A },	{ 72,	0x2B }, | 
|  | { 80,	0x2C }, { 88,	0x09 }, { 96,	0x2D }, { 104,	0x0A }, | 
|  | { 112,	0x2E }, { 128,	0x2F }, { 144,	0x0C }, { 160,	0x30 }, | 
|  | { 192,	0x31 },	{ 224,	0x32 }, { 240,	0x0F }, { 256,	0x33 }, | 
|  | { 288,	0x10 }, { 320,	0x34 },	{ 384,	0x35 }, { 448,	0x36 }, | 
|  | { 480,	0x13 }, { 512,	0x37 }, { 576,	0x14 },	{ 640,	0x38 }, | 
|  | { 768,	0x39 }, { 896,	0x3A }, { 960,	0x17 }, { 1024,	0x3B }, | 
|  | { 1152,	0x18 }, { 1280,	0x3C }, { 1536,	0x3D }, { 1792,	0x3E }, | 
|  | { 1920,	0x1B },	{ 2048,	0x3F }, { 2304,	0x1C }, { 2560,	0x1D }, | 
|  | { 3072,	0x1E }, { 3840,	0x1F } | 
|  | }; | 
|  |  | 
|  | struct imx_i2c_struct { | 
|  | struct i2c_adapter	adapter; | 
|  | struct resource		*res; | 
|  | struct clk		*clk; | 
|  | void __iomem		*base; | 
|  | int			irq; | 
|  | wait_queue_head_t	queue; | 
|  | unsigned long		i2csr; | 
|  | unsigned int 		disable_delay; | 
|  | }; | 
|  |  | 
|  | /** Functions for IMX I2C adapter driver *************************************** | 
|  | *******************************************************************************/ | 
|  |  | 
|  | static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx) | 
|  | { | 
|  | unsigned long orig_jiffies = jiffies; | 
|  |  | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); | 
|  |  | 
|  | /* wait for bus not busy */ | 
|  | while (readb(i2c_imx->base + IMX_I2C_I2SR) & I2SR_IBB) { | 
|  | if (signal_pending(current)) { | 
|  | dev_dbg(&i2c_imx->adapter.dev, | 
|  | "<%s> I2C Interrupted\n", __func__); | 
|  | return -EINTR; | 
|  | } | 
|  | if (time_after(jiffies, orig_jiffies + HZ / 1000)) { | 
|  | dev_dbg(&i2c_imx->adapter.dev, | 
|  | "<%s> I2C bus is busy\n", __func__); | 
|  | return -EIO; | 
|  | } | 
|  | schedule(); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx) | 
|  | { | 
|  | int result; | 
|  |  | 
|  | result = wait_event_interruptible_timeout(i2c_imx->queue, | 
|  | i2c_imx->i2csr & I2SR_IIF, HZ / 10); | 
|  |  | 
|  | if (unlikely(result < 0)) { | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s> result < 0\n", __func__); | 
|  | return result; | 
|  | } else if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) { | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__); | 
|  | i2c_imx->i2csr = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx) | 
|  | { | 
|  | if (readb(i2c_imx->base + IMX_I2C_I2SR) & I2SR_RXAK) { | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__); | 
|  | return -EIO;  /* No ACK */ | 
|  | } | 
|  |  | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s> ACK received\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void i2c_imx_start(struct imx_i2c_struct *i2c_imx) | 
|  | { | 
|  | unsigned int temp = 0; | 
|  |  | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); | 
|  |  | 
|  | /* Enable I2C controller */ | 
|  | writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); | 
|  | /* Start I2C transaction */ | 
|  | temp = readb(i2c_imx->base + IMX_I2C_I2CR); | 
|  | temp |= I2CR_MSTA; | 
|  | writeb(temp, i2c_imx->base + IMX_I2C_I2CR); | 
|  | temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK; | 
|  | writeb(temp, i2c_imx->base + IMX_I2C_I2CR); | 
|  | } | 
|  |  | 
|  | static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) | 
|  | { | 
|  | unsigned int temp = 0; | 
|  |  | 
|  | /* Stop I2C transaction */ | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); | 
|  | temp = readb(i2c_imx->base + IMX_I2C_I2CR); | 
|  | temp &= ~I2CR_MSTA; | 
|  | writeb(temp, i2c_imx->base + IMX_I2C_I2CR); | 
|  | /* setup chip registers to defaults */ | 
|  | writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); | 
|  | writeb(0, i2c_imx->base + IMX_I2C_I2SR); | 
|  | /* | 
|  | * This delay caused by an i.MXL hardware bug. | 
|  | * If no (or too short) delay, no "STOP" bit will be generated. | 
|  | */ | 
|  | udelay(i2c_imx->disable_delay); | 
|  | /* Disable I2C controller */ | 
|  | writeb(0, i2c_imx->base + IMX_I2C_I2CR); | 
|  | } | 
|  |  | 
|  | static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, | 
|  | unsigned int rate) | 
|  | { | 
|  | unsigned int i2c_clk_rate; | 
|  | unsigned int div; | 
|  | int i; | 
|  |  | 
|  | /* Divider value calculation */ | 
|  | i2c_clk_rate = clk_get_rate(i2c_imx->clk); | 
|  | div = (i2c_clk_rate + rate - 1) / rate; | 
|  | if (div < i2c_clk_div[0][0]) | 
|  | i = 0; | 
|  | else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0]) | 
|  | i = ARRAY_SIZE(i2c_clk_div) - 1; | 
|  | else | 
|  | for (i = 0; i2c_clk_div[i][0] < div; i++); | 
|  |  | 
|  | /* Write divider value to register */ | 
|  | writeb(i2c_clk_div[i][1], i2c_imx->base + IMX_I2C_IFDR); | 
|  |  | 
|  | /* | 
|  | * There dummy delay is calculated. | 
|  | * It should be about one I2C clock period long. | 
|  | * This delay is used in I2C bus disable function | 
|  | * to fix chip hardware bug. | 
|  | */ | 
|  | i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0] | 
|  | + (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2); | 
|  |  | 
|  | /* dev_dbg() can't be used, because adapter is not yet registered */ | 
|  | #ifdef CONFIG_I2C_DEBUG_BUS | 
|  | printk(KERN_DEBUG "I2C: <%s> I2C_CLK=%d, REQ DIV=%d\n", | 
|  | __func__, i2c_clk_rate, div); | 
|  | printk(KERN_DEBUG "I2C: <%s> IFDR[IC]=0x%x, REAL DIV=%d\n", | 
|  | __func__, i2c_clk_div[i][1], i2c_clk_div[i][0]); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static irqreturn_t i2c_imx_isr(int irq, void *dev_id) | 
|  | { | 
|  | struct imx_i2c_struct *i2c_imx = dev_id; | 
|  | unsigned int temp; | 
|  |  | 
|  | temp = readb(i2c_imx->base + IMX_I2C_I2SR); | 
|  | if (temp & I2SR_IIF) { | 
|  | /* save status register */ | 
|  | i2c_imx->i2csr = temp; | 
|  | temp &= ~I2SR_IIF; | 
|  | writeb(temp, i2c_imx->base + IMX_I2C_I2SR); | 
|  | wake_up_interruptible(&i2c_imx->queue); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) | 
|  | { | 
|  | int i, result; | 
|  |  | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n", | 
|  | __func__, msgs->addr << 1); | 
|  |  | 
|  | /* write slave address */ | 
|  | writeb(msgs->addr << 1, i2c_imx->base + IMX_I2C_I2DR); | 
|  | result = i2c_imx_trx_complete(i2c_imx); | 
|  | if (result) | 
|  | return result; | 
|  | result = i2c_imx_acked(i2c_imx); | 
|  | if (result) | 
|  | return result; | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s> write data\n", __func__); | 
|  |  | 
|  | /* write data */ | 
|  | for (i = 0; i < msgs->len; i++) { | 
|  | dev_dbg(&i2c_imx->adapter.dev, | 
|  | "<%s> write byte: B%d=0x%X\n", | 
|  | __func__, i, msgs->buf[i]); | 
|  | writeb(msgs->buf[i], i2c_imx->base + IMX_I2C_I2DR); | 
|  | result = i2c_imx_trx_complete(i2c_imx); | 
|  | if (result) | 
|  | return result; | 
|  | result = i2c_imx_acked(i2c_imx); | 
|  | if (result) | 
|  | return result; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) | 
|  | { | 
|  | int i, result; | 
|  | unsigned int temp; | 
|  |  | 
|  | dev_dbg(&i2c_imx->adapter.dev, | 
|  | "<%s> write slave address: addr=0x%x\n", | 
|  | __func__, (msgs->addr << 1) | 0x01); | 
|  |  | 
|  | /* write slave address */ | 
|  | writeb((msgs->addr << 1) | 0x01, i2c_imx->base + IMX_I2C_I2DR); | 
|  | result = i2c_imx_trx_complete(i2c_imx); | 
|  | if (result) | 
|  | return result; | 
|  | result = i2c_imx_acked(i2c_imx); | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__); | 
|  |  | 
|  | /* setup bus to read data */ | 
|  | temp = readb(i2c_imx->base + IMX_I2C_I2CR); | 
|  | temp &= ~I2CR_MTX; | 
|  | if (msgs->len - 1) | 
|  | temp &= ~I2CR_TXAK; | 
|  | writeb(temp, i2c_imx->base + IMX_I2C_I2CR); | 
|  | readb(i2c_imx->base + IMX_I2C_I2DR); /* dummy read */ | 
|  |  | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__); | 
|  |  | 
|  | /* read data */ | 
|  | for (i = 0; i < msgs->len; i++) { | 
|  | result = i2c_imx_trx_complete(i2c_imx); | 
|  | if (result) | 
|  | return result; | 
|  | if (i == (msgs->len - 1)) { | 
|  | dev_dbg(&i2c_imx->adapter.dev, | 
|  | "<%s> clear MSTA\n", __func__); | 
|  | temp = readb(i2c_imx->base + IMX_I2C_I2CR); | 
|  | temp &= ~I2CR_MSTA; | 
|  | writeb(temp, i2c_imx->base + IMX_I2C_I2CR); | 
|  | } else if (i == (msgs->len - 2)) { | 
|  | dev_dbg(&i2c_imx->adapter.dev, | 
|  | "<%s> set TXAK\n", __func__); | 
|  | temp = readb(i2c_imx->base + IMX_I2C_I2CR); | 
|  | temp |= I2CR_TXAK; | 
|  | writeb(temp, i2c_imx->base + IMX_I2C_I2CR); | 
|  | } | 
|  | msgs->buf[i] = readb(i2c_imx->base + IMX_I2C_I2DR); | 
|  | dev_dbg(&i2c_imx->adapter.dev, | 
|  | "<%s> read byte: B%d=0x%X\n", | 
|  | __func__, i, msgs->buf[i]); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int i2c_imx_xfer(struct i2c_adapter *adapter, | 
|  | struct i2c_msg *msgs, int num) | 
|  | { | 
|  | unsigned int i, temp; | 
|  | int result; | 
|  | struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter); | 
|  |  | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); | 
|  |  | 
|  | /* Check if i2c bus is not busy */ | 
|  | result = i2c_imx_bus_busy(i2c_imx); | 
|  | if (result) | 
|  | goto fail0; | 
|  |  | 
|  | /* Start I2C transfer */ | 
|  | i2c_imx_start(i2c_imx); | 
|  |  | 
|  | /* read/write data */ | 
|  | for (i = 0; i < num; i++) { | 
|  | if (i) { | 
|  | dev_dbg(&i2c_imx->adapter.dev, | 
|  | "<%s> repeated start\n", __func__); | 
|  | temp = readb(i2c_imx->base + IMX_I2C_I2CR); | 
|  | temp |= I2CR_RSTA; | 
|  | writeb(temp, i2c_imx->base + IMX_I2C_I2CR); | 
|  | } | 
|  | dev_dbg(&i2c_imx->adapter.dev, | 
|  | "<%s> transfer message: %d\n", __func__, i); | 
|  | /* write/read data */ | 
|  | #ifdef CONFIG_I2C_DEBUG_BUS | 
|  | temp = readb(i2c_imx->base + IMX_I2C_I2CR); | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s> CONTROL: IEN=%d, IIEN=%d, " | 
|  | "MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n", __func__, | 
|  | (temp & I2CR_IEN ? 1 : 0), (temp & I2CR_IIEN ? 1 : 0), | 
|  | (temp & I2CR_MSTA ? 1 : 0), (temp & I2CR_MTX ? 1 : 0), | 
|  | (temp & I2CR_TXAK ? 1 : 0), (temp & I2CR_RSTA ? 1 : 0)); | 
|  | temp = readb(i2c_imx->base + IMX_I2C_I2SR); | 
|  | dev_dbg(&i2c_imx->adapter.dev, | 
|  | "<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, " | 
|  | "IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n", __func__, | 
|  | (temp & I2SR_ICF ? 1 : 0), (temp & I2SR_IAAS ? 1 : 0), | 
|  | (temp & I2SR_IBB ? 1 : 0), (temp & I2SR_IAL ? 1 : 0), | 
|  | (temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0), | 
|  | (temp & I2SR_RXAK ? 1 : 0)); | 
|  | #endif | 
|  | if (msgs[i].flags & I2C_M_RD) | 
|  | result = i2c_imx_read(i2c_imx, &msgs[i]); | 
|  | else | 
|  | result = i2c_imx_write(i2c_imx, &msgs[i]); | 
|  | } | 
|  |  | 
|  | fail0: | 
|  | /* Stop I2C transfer */ | 
|  | i2c_imx_stop(i2c_imx); | 
|  |  | 
|  | dev_dbg(&i2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__, | 
|  | (result < 0) ? "error" : "success msg", | 
|  | (result < 0) ? result : num); | 
|  | return (result < 0) ? result : num; | 
|  | } | 
|  |  | 
|  | static u32 i2c_imx_func(struct i2c_adapter *adapter) | 
|  | { | 
|  | return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | 
|  | } | 
|  |  | 
|  | static struct i2c_algorithm i2c_imx_algo = { | 
|  | .master_xfer	= i2c_imx_xfer, | 
|  | .functionality	= i2c_imx_func, | 
|  | }; | 
|  |  | 
|  | static int __init i2c_imx_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct imx_i2c_struct *i2c_imx; | 
|  | struct resource *res; | 
|  | struct imxi2c_platform_data *pdata; | 
|  | void __iomem *base; | 
|  | resource_size_t res_size; | 
|  | int irq; | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(&pdev->dev, "<%s>\n", __func__); | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!res) { | 
|  | dev_err(&pdev->dev, "can't get device resources\n"); | 
|  | return -ENOENT; | 
|  | } | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (irq < 0) { | 
|  | dev_err(&pdev->dev, "can't get irq number\n"); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | pdata = pdev->dev.platform_data; | 
|  |  | 
|  | if (pdata && pdata->init) { | 
|  | ret = pdata->init(&pdev->dev); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | res_size = resource_size(res); | 
|  | base = ioremap(res->start, res_size); | 
|  | if (!base) { | 
|  | dev_err(&pdev->dev, "ioremap failed\n"); | 
|  | ret = -EIO; | 
|  | goto fail0; | 
|  | } | 
|  |  | 
|  | i2c_imx = kzalloc(sizeof(struct imx_i2c_struct), GFP_KERNEL); | 
|  | if (!i2c_imx) { | 
|  | dev_err(&pdev->dev, "can't allocate interface\n"); | 
|  | ret = -ENOMEM; | 
|  | goto fail1; | 
|  | } | 
|  |  | 
|  | if (!request_mem_region(res->start, res_size, DRIVER_NAME)) { | 
|  | ret = -EBUSY; | 
|  | goto fail2; | 
|  | } | 
|  |  | 
|  | /* Setup i2c_imx driver structure */ | 
|  | strcpy(i2c_imx->adapter.name, pdev->name); | 
|  | i2c_imx->adapter.owner		= THIS_MODULE; | 
|  | i2c_imx->adapter.algo		= &i2c_imx_algo; | 
|  | i2c_imx->adapter.dev.parent	= &pdev->dev; | 
|  | i2c_imx->adapter.nr 		= pdev->id; | 
|  | i2c_imx->irq			= irq; | 
|  | i2c_imx->base			= base; | 
|  | i2c_imx->res			= res; | 
|  |  | 
|  | /* Get I2C clock */ | 
|  | i2c_imx->clk = clk_get(&pdev->dev, "i2c_clk"); | 
|  | if (IS_ERR(i2c_imx->clk)) { | 
|  | ret = PTR_ERR(i2c_imx->clk); | 
|  | dev_err(&pdev->dev, "can't get I2C clock\n"); | 
|  | goto fail3; | 
|  | } | 
|  | clk_enable(i2c_imx->clk); | 
|  |  | 
|  | /* Request IRQ */ | 
|  | ret = request_irq(i2c_imx->irq, i2c_imx_isr, 0, pdev->name, i2c_imx); | 
|  | if (ret) { | 
|  | dev_err(&pdev->dev, "can't claim irq %d\n", i2c_imx->irq); | 
|  | goto fail4; | 
|  | } | 
|  |  | 
|  | /* Init queue */ | 
|  | init_waitqueue_head(&i2c_imx->queue); | 
|  |  | 
|  | /* Set up adapter data */ | 
|  | i2c_set_adapdata(&i2c_imx->adapter, i2c_imx); | 
|  |  | 
|  | /* Set up clock divider */ | 
|  | if (pdata && pdata->bitrate) | 
|  | i2c_imx_set_clk(i2c_imx, pdata->bitrate); | 
|  | else | 
|  | i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE); | 
|  |  | 
|  | /* Set up chip registers to defaults */ | 
|  | writeb(0, i2c_imx->base + IMX_I2C_I2CR); | 
|  | writeb(0, i2c_imx->base + IMX_I2C_I2SR); | 
|  |  | 
|  | /* Add I2C adapter */ | 
|  | ret = i2c_add_numbered_adapter(&i2c_imx->adapter); | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, "registration failed\n"); | 
|  | goto fail5; | 
|  | } | 
|  |  | 
|  | /* Set up platform driver data */ | 
|  | platform_set_drvdata(pdev, i2c_imx); | 
|  |  | 
|  | dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", i2c_imx->irq); | 
|  | dev_dbg(&i2c_imx->adapter.dev, "device resources from 0x%x to 0x%x\n", | 
|  | i2c_imx->res->start, i2c_imx->res->end); | 
|  | dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x \n", | 
|  | res_size, i2c_imx->res->start); | 
|  | dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n", | 
|  | i2c_imx->adapter.name); | 
|  | dev_dbg(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); | 
|  |  | 
|  | return 0;   /* Return OK */ | 
|  |  | 
|  | fail5: | 
|  | free_irq(i2c_imx->irq, i2c_imx); | 
|  | fail4: | 
|  | clk_disable(i2c_imx->clk); | 
|  | clk_put(i2c_imx->clk); | 
|  | fail3: | 
|  | release_mem_region(i2c_imx->res->start, resource_size(res)); | 
|  | fail2: | 
|  | kfree(i2c_imx); | 
|  | fail1: | 
|  | iounmap(base); | 
|  | fail0: | 
|  | if (pdata && pdata->exit) | 
|  | pdata->exit(&pdev->dev); | 
|  | return ret; /* Return error number */ | 
|  | } | 
|  |  | 
|  | static int __exit i2c_imx_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev); | 
|  | struct imxi2c_platform_data *pdata = pdev->dev.platform_data; | 
|  |  | 
|  | /* remove adapter */ | 
|  | dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n"); | 
|  | i2c_del_adapter(&i2c_imx->adapter); | 
|  | platform_set_drvdata(pdev, NULL); | 
|  |  | 
|  | /* free interrupt */ | 
|  | free_irq(i2c_imx->irq, i2c_imx); | 
|  |  | 
|  | /* setup chip registers to defaults */ | 
|  | writeb(0, i2c_imx->base + IMX_I2C_IADR); | 
|  | writeb(0, i2c_imx->base + IMX_I2C_IFDR); | 
|  | writeb(0, i2c_imx->base + IMX_I2C_I2CR); | 
|  | writeb(0, i2c_imx->base + IMX_I2C_I2SR); | 
|  |  | 
|  | /* Shut down hardware */ | 
|  | if (pdata && pdata->exit) | 
|  | pdata->exit(&pdev->dev); | 
|  |  | 
|  | /* Disable I2C clock */ | 
|  | clk_disable(i2c_imx->clk); | 
|  | clk_put(i2c_imx->clk); | 
|  |  | 
|  | release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res)); | 
|  | iounmap(i2c_imx->base); | 
|  | kfree(i2c_imx); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver i2c_imx_driver = { | 
|  | .probe		= i2c_imx_probe, | 
|  | .remove		= __exit_p(i2c_imx_remove), | 
|  | .driver	= { | 
|  | .name	= DRIVER_NAME, | 
|  | .owner	= THIS_MODULE, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static int __init i2c_adap_imx_init(void) | 
|  | { | 
|  | return platform_driver_probe(&i2c_imx_driver, i2c_imx_probe); | 
|  | } | 
|  |  | 
|  | static void __exit i2c_adap_imx_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&i2c_imx_driver); | 
|  | } | 
|  |  | 
|  | module_init(i2c_adap_imx_init); | 
|  | module_exit(i2c_adap_imx_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Darius Augulis"); | 
|  | MODULE_DESCRIPTION("I2C adapter driver for IMX I2C bus"); | 
|  | MODULE_ALIAS("platform:" DRIVER_NAME); |