|  | /* hfcsusb.c | 
|  | * mISDN driver for Colognechip HFC-S USB chip | 
|  | * | 
|  | * Copyright 2001 by Peter Sprenger (sprenger@moving-bytes.de) | 
|  | * Copyright 2008 by Martin Bachem (info@bachem-it.com) | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2, or (at your option) | 
|  | * any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | * | 
|  | * | 
|  | * module params | 
|  | *   debug=<n>, default=0, with n=0xHHHHGGGG | 
|  | *      H - l1 driver flags described in hfcsusb.h | 
|  | *      G - common mISDN debug flags described at mISDNhw.h | 
|  | * | 
|  | *   poll=<n>, default 128 | 
|  | *     n : burst size of PH_DATA_IND at transparent rx data | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/mISDNhw.h> | 
|  | #include "hfcsusb.h" | 
|  |  | 
|  | static const char *hfcsusb_rev = "Revision: 0.3.3 (socket), 2008-11-05"; | 
|  |  | 
|  | static unsigned int debug; | 
|  | static int poll = DEFAULT_TRANSP_BURST_SZ; | 
|  |  | 
|  | static LIST_HEAD(HFClist); | 
|  | static DEFINE_RWLOCK(HFClock); | 
|  |  | 
|  |  | 
|  | MODULE_AUTHOR("Martin Bachem"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | module_param(debug, uint, S_IRUGO | S_IWUSR); | 
|  | module_param(poll, int, 0); | 
|  |  | 
|  | static int hfcsusb_cnt; | 
|  |  | 
|  | /* some function prototypes */ | 
|  | static void hfcsusb_ph_command(struct hfcsusb *hw, u_char command); | 
|  | static void release_hw(struct hfcsusb *hw); | 
|  | static void reset_hfcsusb(struct hfcsusb *hw); | 
|  | static void setPortMode(struct hfcsusb *hw); | 
|  | static void hfcsusb_start_endpoint(struct hfcsusb *hw, int channel); | 
|  | static void hfcsusb_stop_endpoint(struct hfcsusb *hw, int channel); | 
|  | static int  hfcsusb_setup_bch(struct bchannel *bch, int protocol); | 
|  | static void deactivate_bchannel(struct bchannel *bch); | 
|  | static void hfcsusb_ph_info(struct hfcsusb *hw); | 
|  |  | 
|  | /* start next background transfer for control channel */ | 
|  | static void | 
|  | ctrl_start_transfer(struct hfcsusb *hw) | 
|  | { | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); | 
|  |  | 
|  | if (hw->ctrl_cnt) { | 
|  | hw->ctrl_urb->pipe = hw->ctrl_out_pipe; | 
|  | hw->ctrl_urb->setup_packet = (u_char *)&hw->ctrl_write; | 
|  | hw->ctrl_urb->transfer_buffer = NULL; | 
|  | hw->ctrl_urb->transfer_buffer_length = 0; | 
|  | hw->ctrl_write.wIndex = | 
|  | cpu_to_le16(hw->ctrl_buff[hw->ctrl_out_idx].hfcs_reg); | 
|  | hw->ctrl_write.wValue = | 
|  | cpu_to_le16(hw->ctrl_buff[hw->ctrl_out_idx].reg_val); | 
|  |  | 
|  | usb_submit_urb(hw->ctrl_urb, GFP_ATOMIC); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * queue a control transfer request to write HFC-S USB | 
|  | * chip register using CTRL resuest queue | 
|  | */ | 
|  | static int write_reg(struct hfcsusb *hw, __u8 reg, __u8 val) | 
|  | { | 
|  | struct ctrl_buf *buf; | 
|  |  | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s reg(0x%02x) val(0x%02x)\n", | 
|  | hw->name, __func__, reg, val); | 
|  |  | 
|  | spin_lock(&hw->ctrl_lock); | 
|  | if (hw->ctrl_cnt >= HFC_CTRL_BUFSIZE) | 
|  | return 1; | 
|  | buf = &hw->ctrl_buff[hw->ctrl_in_idx]; | 
|  | buf->hfcs_reg = reg; | 
|  | buf->reg_val = val; | 
|  | if (++hw->ctrl_in_idx >= HFC_CTRL_BUFSIZE) | 
|  | hw->ctrl_in_idx = 0; | 
|  | if (++hw->ctrl_cnt == 1) | 
|  | ctrl_start_transfer(hw); | 
|  | spin_unlock(&hw->ctrl_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* control completion routine handling background control cmds */ | 
|  | static void | 
|  | ctrl_complete(struct urb *urb) | 
|  | { | 
|  | struct hfcsusb *hw = (struct hfcsusb *) urb->context; | 
|  | struct ctrl_buf *buf; | 
|  |  | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); | 
|  |  | 
|  | urb->dev = hw->dev; | 
|  | if (hw->ctrl_cnt) { | 
|  | buf = &hw->ctrl_buff[hw->ctrl_out_idx]; | 
|  | hw->ctrl_cnt--;	/* decrement actual count */ | 
|  | if (++hw->ctrl_out_idx >= HFC_CTRL_BUFSIZE) | 
|  | hw->ctrl_out_idx = 0;	/* pointer wrap */ | 
|  |  | 
|  | ctrl_start_transfer(hw); /* start next transfer */ | 
|  | } | 
|  | } | 
|  |  | 
|  | /* handle LED bits   */ | 
|  | static void | 
|  | set_led_bit(struct hfcsusb *hw, signed short led_bits, int set_on) | 
|  | { | 
|  | if (set_on) { | 
|  | if (led_bits < 0) | 
|  | hw->led_state &= ~abs(led_bits); | 
|  | else | 
|  | hw->led_state |= led_bits; | 
|  | } else { | 
|  | if (led_bits < 0) | 
|  | hw->led_state |= abs(led_bits); | 
|  | else | 
|  | hw->led_state &= ~led_bits; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* handle LED requests  */ | 
|  | static void | 
|  | handle_led(struct hfcsusb *hw, int event) | 
|  | { | 
|  | struct hfcsusb_vdata *driver_info = (struct hfcsusb_vdata *) | 
|  | hfcsusb_idtab[hw->vend_idx].driver_info; | 
|  | __u8 tmpled; | 
|  |  | 
|  | if (driver_info->led_scheme == LED_OFF) | 
|  | return; | 
|  | tmpled = hw->led_state; | 
|  |  | 
|  | switch (event) { | 
|  | case LED_POWER_ON: | 
|  | set_led_bit(hw, driver_info->led_bits[0], 1); | 
|  | set_led_bit(hw, driver_info->led_bits[1], 0); | 
|  | set_led_bit(hw, driver_info->led_bits[2], 0); | 
|  | set_led_bit(hw, driver_info->led_bits[3], 0); | 
|  | break; | 
|  | case LED_POWER_OFF: | 
|  | set_led_bit(hw, driver_info->led_bits[0], 0); | 
|  | set_led_bit(hw, driver_info->led_bits[1], 0); | 
|  | set_led_bit(hw, driver_info->led_bits[2], 0); | 
|  | set_led_bit(hw, driver_info->led_bits[3], 0); | 
|  | break; | 
|  | case LED_S0_ON: | 
|  | set_led_bit(hw, driver_info->led_bits[1], 1); | 
|  | break; | 
|  | case LED_S0_OFF: | 
|  | set_led_bit(hw, driver_info->led_bits[1], 0); | 
|  | break; | 
|  | case LED_B1_ON: | 
|  | set_led_bit(hw, driver_info->led_bits[2], 1); | 
|  | break; | 
|  | case LED_B1_OFF: | 
|  | set_led_bit(hw, driver_info->led_bits[2], 0); | 
|  | break; | 
|  | case LED_B2_ON: | 
|  | set_led_bit(hw, driver_info->led_bits[3], 1); | 
|  | break; | 
|  | case LED_B2_OFF: | 
|  | set_led_bit(hw, driver_info->led_bits[3], 0); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (hw->led_state != tmpled) { | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s reg(0x%02x) val(x%02x)\n", | 
|  | hw->name, __func__, | 
|  | HFCUSB_P_DATA, hw->led_state); | 
|  |  | 
|  | write_reg(hw, HFCUSB_P_DATA, hw->led_state); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Layer2 -> Layer 1 Bchannel data | 
|  | */ | 
|  | static int | 
|  | hfcusb_l2l1B(struct mISDNchannel *ch, struct sk_buff *skb) | 
|  | { | 
|  | struct bchannel		*bch = container_of(ch, struct bchannel, ch); | 
|  | struct hfcsusb		*hw = bch->hw; | 
|  | int			ret = -EINVAL; | 
|  | struct mISDNhead	*hh = mISDN_HEAD_P(skb); | 
|  | u_long			flags; | 
|  |  | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); | 
|  |  | 
|  | switch (hh->prim) { | 
|  | case PH_DATA_REQ: | 
|  | spin_lock_irqsave(&hw->lock, flags); | 
|  | ret = bchannel_senddata(bch, skb); | 
|  | spin_unlock_irqrestore(&hw->lock, flags); | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s PH_DATA_REQ ret(%i)\n", | 
|  | hw->name, __func__, ret); | 
|  | if (ret > 0) { | 
|  | /* | 
|  | * other l1 drivers don't send early confirms on | 
|  | * transp data, but hfcsusb does because tx_next | 
|  | * skb is needed in tx_iso_complete() | 
|  | */ | 
|  | queue_ch_frame(ch, PH_DATA_CNF, hh->id, NULL); | 
|  | ret = 0; | 
|  | } | 
|  | return ret; | 
|  | case PH_ACTIVATE_REQ: | 
|  | if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) { | 
|  | hfcsusb_start_endpoint(hw, bch->nr); | 
|  | ret = hfcsusb_setup_bch(bch, ch->protocol); | 
|  | } else | 
|  | ret = 0; | 
|  | if (!ret) | 
|  | _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, | 
|  | 0, NULL, GFP_KERNEL); | 
|  | break; | 
|  | case PH_DEACTIVATE_REQ: | 
|  | deactivate_bchannel(bch); | 
|  | _queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, | 
|  | 0, NULL, GFP_KERNEL); | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | if (!ret) | 
|  | dev_kfree_skb(skb); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * send full D/B channel status information | 
|  | * as MPH_INFORMATION_IND | 
|  | */ | 
|  | static void | 
|  | hfcsusb_ph_info(struct hfcsusb *hw) | 
|  | { | 
|  | struct ph_info *phi; | 
|  | struct dchannel *dch = &hw->dch; | 
|  | int i; | 
|  |  | 
|  | phi = kzalloc(sizeof(struct ph_info) + | 
|  | dch->dev.nrbchan * sizeof(struct ph_info_ch), GFP_ATOMIC); | 
|  | phi->dch.ch.protocol = hw->protocol; | 
|  | phi->dch.ch.Flags = dch->Flags; | 
|  | phi->dch.state = dch->state; | 
|  | phi->dch.num_bch = dch->dev.nrbchan; | 
|  | for (i = 0; i < dch->dev.nrbchan; i++) { | 
|  | phi->bch[i].protocol = hw->bch[i].ch.protocol; | 
|  | phi->bch[i].Flags = hw->bch[i].Flags; | 
|  | } | 
|  | _queue_data(&dch->dev.D, MPH_INFORMATION_IND, MISDN_ID_ANY, | 
|  | sizeof(struct ph_info_dch) + dch->dev.nrbchan * | 
|  | sizeof(struct ph_info_ch), phi, GFP_ATOMIC); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Layer2 -> Layer 1 Dchannel data | 
|  | */ | 
|  | static int | 
|  | hfcusb_l2l1D(struct mISDNchannel *ch, struct sk_buff *skb) | 
|  | { | 
|  | struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D); | 
|  | struct dchannel		*dch = container_of(dev, struct dchannel, dev); | 
|  | struct mISDNhead	*hh = mISDN_HEAD_P(skb); | 
|  | struct hfcsusb		*hw = dch->hw; | 
|  | int			ret = -EINVAL; | 
|  | u_long			flags; | 
|  |  | 
|  | switch (hh->prim) { | 
|  | case PH_DATA_REQ: | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s: PH_DATA_REQ\n", | 
|  | hw->name, __func__); | 
|  |  | 
|  | spin_lock_irqsave(&hw->lock, flags); | 
|  | ret = dchannel_senddata(dch, skb); | 
|  | spin_unlock_irqrestore(&hw->lock, flags); | 
|  | if (ret > 0) { | 
|  | ret = 0; | 
|  | queue_ch_frame(ch, PH_DATA_CNF, hh->id, NULL); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case PH_ACTIVATE_REQ: | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s: PH_ACTIVATE_REQ %s\n", | 
|  | hw->name, __func__, | 
|  | (hw->protocol == ISDN_P_NT_S0) ? "NT" : "TE"); | 
|  |  | 
|  | if (hw->protocol == ISDN_P_NT_S0) { | 
|  | ret = 0; | 
|  | if (test_bit(FLG_ACTIVE, &dch->Flags)) { | 
|  | _queue_data(&dch->dev.D, | 
|  | PH_ACTIVATE_IND, MISDN_ID_ANY, 0, | 
|  | NULL, GFP_ATOMIC); | 
|  | } else { | 
|  | hfcsusb_ph_command(hw, | 
|  | HFC_L1_ACTIVATE_NT); | 
|  | test_and_set_bit(FLG_L2_ACTIVATED, | 
|  | &dch->Flags); | 
|  | } | 
|  | } else { | 
|  | hfcsusb_ph_command(hw, HFC_L1_ACTIVATE_TE); | 
|  | ret = l1_event(dch->l1, hh->prim); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case PH_DEACTIVATE_REQ: | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s: PH_DEACTIVATE_REQ\n", | 
|  | hw->name, __func__); | 
|  | test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags); | 
|  |  | 
|  | if (hw->protocol == ISDN_P_NT_S0) { | 
|  | hfcsusb_ph_command(hw, HFC_L1_DEACTIVATE_NT); | 
|  | spin_lock_irqsave(&hw->lock, flags); | 
|  | skb_queue_purge(&dch->squeue); | 
|  | if (dch->tx_skb) { | 
|  | dev_kfree_skb(dch->tx_skb); | 
|  | dch->tx_skb = NULL; | 
|  | } | 
|  | dch->tx_idx = 0; | 
|  | if (dch->rx_skb) { | 
|  | dev_kfree_skb(dch->rx_skb); | 
|  | dch->rx_skb = NULL; | 
|  | } | 
|  | test_and_clear_bit(FLG_TX_BUSY, &dch->Flags); | 
|  | spin_unlock_irqrestore(&hw->lock, flags); | 
|  | #ifdef FIXME | 
|  | if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags)) | 
|  | dchannel_sched_event(&hc->dch, D_CLEARBUSY); | 
|  | #endif | 
|  | ret = 0; | 
|  | } else | 
|  | ret = l1_event(dch->l1, hh->prim); | 
|  | break; | 
|  | case MPH_INFORMATION_REQ: | 
|  | hfcsusb_ph_info(hw); | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Layer 1 callback function | 
|  | */ | 
|  | static int | 
|  | hfc_l1callback(struct dchannel *dch, u_int cmd) | 
|  | { | 
|  | struct hfcsusb *hw = dch->hw; | 
|  |  | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s cmd 0x%x\n", | 
|  | hw->name, __func__, cmd); | 
|  |  | 
|  | switch (cmd) { | 
|  | case INFO3_P8: | 
|  | case INFO3_P10: | 
|  | case HW_RESET_REQ: | 
|  | case HW_POWERUP_REQ: | 
|  | break; | 
|  |  | 
|  | case HW_DEACT_REQ: | 
|  | skb_queue_purge(&dch->squeue); | 
|  | if (dch->tx_skb) { | 
|  | dev_kfree_skb(dch->tx_skb); | 
|  | dch->tx_skb = NULL; | 
|  | } | 
|  | dch->tx_idx = 0; | 
|  | if (dch->rx_skb) { | 
|  | dev_kfree_skb(dch->rx_skb); | 
|  | dch->rx_skb = NULL; | 
|  | } | 
|  | test_and_clear_bit(FLG_TX_BUSY, &dch->Flags); | 
|  | break; | 
|  | case PH_ACTIVATE_IND: | 
|  | test_and_set_bit(FLG_ACTIVE, &dch->Flags); | 
|  | _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL, | 
|  | GFP_ATOMIC); | 
|  | break; | 
|  | case PH_DEACTIVATE_IND: | 
|  | test_and_clear_bit(FLG_ACTIVE, &dch->Flags); | 
|  | _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL, | 
|  | GFP_ATOMIC); | 
|  | break; | 
|  | default: | 
|  | if (dch->debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: %s: unknown cmd %x\n", | 
|  | hw->name, __func__, cmd); | 
|  | return -1; | 
|  | } | 
|  | hfcsusb_ph_info(hw); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | open_dchannel(struct hfcsusb *hw, struct mISDNchannel *ch, | 
|  | struct channel_req *rq) | 
|  | { | 
|  | int err = 0; | 
|  |  | 
|  | if (debug & DEBUG_HW_OPEN) | 
|  | printk(KERN_DEBUG "%s: %s: dev(%d) open addr(%i) from %p\n", | 
|  | hw->name, __func__, hw->dch.dev.id, rq->adr.channel, | 
|  | __builtin_return_address(0)); | 
|  | if (rq->protocol == ISDN_P_NONE) | 
|  | return -EINVAL; | 
|  |  | 
|  | test_and_clear_bit(FLG_ACTIVE, &hw->dch.Flags); | 
|  | test_and_clear_bit(FLG_ACTIVE, &hw->ech.Flags); | 
|  | hfcsusb_start_endpoint(hw, HFC_CHAN_D); | 
|  |  | 
|  | /* E-Channel logging */ | 
|  | if (rq->adr.channel == 1) { | 
|  | if (hw->fifos[HFCUSB_PCM_RX].pipe) { | 
|  | hfcsusb_start_endpoint(hw, HFC_CHAN_E); | 
|  | set_bit(FLG_ACTIVE, &hw->ech.Flags); | 
|  | _queue_data(&hw->ech.dev.D, PH_ACTIVATE_IND, | 
|  | MISDN_ID_ANY, 0, NULL, GFP_ATOMIC); | 
|  | } else | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!hw->initdone) { | 
|  | hw->protocol = rq->protocol; | 
|  | if (rq->protocol == ISDN_P_TE_S0) { | 
|  | err = create_l1(&hw->dch, hfc_l1callback); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  | setPortMode(hw); | 
|  | ch->protocol = rq->protocol; | 
|  | hw->initdone = 1; | 
|  | } else { | 
|  | if (rq->protocol != ch->protocol) | 
|  | return -EPROTONOSUPPORT; | 
|  | } | 
|  |  | 
|  | if (((ch->protocol == ISDN_P_NT_S0) && (hw->dch.state == 3)) || | 
|  | ((ch->protocol == ISDN_P_TE_S0) && (hw->dch.state == 7))) | 
|  | _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, | 
|  | 0, NULL, GFP_KERNEL); | 
|  | rq->ch = ch; | 
|  | if (!try_module_get(THIS_MODULE)) | 
|  | printk(KERN_WARNING "%s: %s: cannot get module\n", | 
|  | hw->name, __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | open_bchannel(struct hfcsusb *hw, struct channel_req *rq) | 
|  | { | 
|  | struct bchannel		*bch; | 
|  |  | 
|  | if (rq->adr.channel > 2) | 
|  | return -EINVAL; | 
|  | if (rq->protocol == ISDN_P_NONE) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s B%i\n", | 
|  | hw->name, __func__, rq->adr.channel); | 
|  |  | 
|  | bch = &hw->bch[rq->adr.channel - 1]; | 
|  | if (test_and_set_bit(FLG_OPEN, &bch->Flags)) | 
|  | return -EBUSY; /* b-channel can be only open once */ | 
|  | test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags); | 
|  | bch->ch.protocol = rq->protocol; | 
|  | rq->ch = &bch->ch; | 
|  |  | 
|  | /* start USB endpoint for bchannel */ | 
|  | if (rq->adr.channel  == 1) | 
|  | hfcsusb_start_endpoint(hw, HFC_CHAN_B1); | 
|  | else | 
|  | hfcsusb_start_endpoint(hw, HFC_CHAN_B2); | 
|  |  | 
|  | if (!try_module_get(THIS_MODULE)) | 
|  | printk(KERN_WARNING "%s: %s:cannot get module\n", | 
|  | hw->name, __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | channel_ctrl(struct hfcsusb *hw, struct mISDN_ctrl_req *cq) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s op(0x%x) channel(0x%x)\n", | 
|  | hw->name, __func__, (cq->op), (cq->channel)); | 
|  |  | 
|  | switch (cq->op) { | 
|  | case MISDN_CTRL_GETOP: | 
|  | cq->op = MISDN_CTRL_LOOP | MISDN_CTRL_CONNECT | | 
|  | MISDN_CTRL_DISCONNECT; | 
|  | break; | 
|  | default: | 
|  | printk(KERN_WARNING "%s: %s: unknown Op %x\n", | 
|  | hw->name, __func__, cq->op); | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * device control function | 
|  | */ | 
|  | static int | 
|  | hfc_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg) | 
|  | { | 
|  | struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D); | 
|  | struct dchannel		*dch = container_of(dev, struct dchannel, dev); | 
|  | struct hfcsusb		*hw = dch->hw; | 
|  | struct channel_req	*rq; | 
|  | int			err = 0; | 
|  |  | 
|  | if (dch->debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: %s: cmd:%x %p\n", | 
|  | hw->name, __func__, cmd, arg); | 
|  | switch (cmd) { | 
|  | case OPEN_CHANNEL: | 
|  | rq = arg; | 
|  | if ((rq->protocol == ISDN_P_TE_S0) || | 
|  | (rq->protocol == ISDN_P_NT_S0)) | 
|  | err = open_dchannel(hw, ch, rq); | 
|  | else | 
|  | err = open_bchannel(hw, rq); | 
|  | if (!err) | 
|  | hw->open++; | 
|  | break; | 
|  | case CLOSE_CHANNEL: | 
|  | hw->open--; | 
|  | if (debug & DEBUG_HW_OPEN) | 
|  | printk(KERN_DEBUG | 
|  | "%s: %s: dev(%d) close from %p (open %d)\n", | 
|  | hw->name, __func__, hw->dch.dev.id, | 
|  | __builtin_return_address(0), hw->open); | 
|  | if (!hw->open) { | 
|  | hfcsusb_stop_endpoint(hw, HFC_CHAN_D); | 
|  | if (hw->fifos[HFCUSB_PCM_RX].pipe) | 
|  | hfcsusb_stop_endpoint(hw, HFC_CHAN_E); | 
|  | handle_led(hw, LED_POWER_ON); | 
|  | } | 
|  | module_put(THIS_MODULE); | 
|  | break; | 
|  | case CONTROL_CHANNEL: | 
|  | err = channel_ctrl(hw, arg); | 
|  | break; | 
|  | default: | 
|  | if (dch->debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: %s: unknown command %x\n", | 
|  | hw->name, __func__, cmd); | 
|  | return -EINVAL; | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * S0 TE state change event handler | 
|  | */ | 
|  | static void | 
|  | ph_state_te(struct dchannel *dch) | 
|  | { | 
|  | struct hfcsusb *hw = dch->hw; | 
|  |  | 
|  | if (debug & DEBUG_HW) { | 
|  | if (dch->state <= HFC_MAX_TE_LAYER1_STATE) | 
|  | printk(KERN_DEBUG "%s: %s: %s\n", hw->name, __func__, | 
|  | HFC_TE_LAYER1_STATES[dch->state]); | 
|  | else | 
|  | printk(KERN_DEBUG "%s: %s: TE F%d\n", | 
|  | hw->name, __func__, dch->state); | 
|  | } | 
|  |  | 
|  | switch (dch->state) { | 
|  | case 0: | 
|  | l1_event(dch->l1, HW_RESET_IND); | 
|  | break; | 
|  | case 3: | 
|  | l1_event(dch->l1, HW_DEACT_IND); | 
|  | break; | 
|  | case 5: | 
|  | case 8: | 
|  | l1_event(dch->l1, ANYSIGNAL); | 
|  | break; | 
|  | case 6: | 
|  | l1_event(dch->l1, INFO2); | 
|  | break; | 
|  | case 7: | 
|  | l1_event(dch->l1, INFO4_P8); | 
|  | break; | 
|  | } | 
|  | if (dch->state == 7) | 
|  | handle_led(hw, LED_S0_ON); | 
|  | else | 
|  | handle_led(hw, LED_S0_OFF); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * S0 NT state change event handler | 
|  | */ | 
|  | static void | 
|  | ph_state_nt(struct dchannel *dch) | 
|  | { | 
|  | struct hfcsusb *hw = dch->hw; | 
|  |  | 
|  | if (debug & DEBUG_HW) { | 
|  | if (dch->state <= HFC_MAX_NT_LAYER1_STATE) | 
|  | printk(KERN_DEBUG "%s: %s: %s\n", | 
|  | hw->name, __func__, | 
|  | HFC_NT_LAYER1_STATES[dch->state]); | 
|  |  | 
|  | else | 
|  | printk(KERN_INFO DRIVER_NAME "%s: %s: NT G%d\n", | 
|  | hw->name, __func__, dch->state); | 
|  | } | 
|  |  | 
|  | switch (dch->state) { | 
|  | case (1): | 
|  | test_and_clear_bit(FLG_ACTIVE, &dch->Flags); | 
|  | test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags); | 
|  | hw->nt_timer = 0; | 
|  | hw->timers &= ~NT_ACTIVATION_TIMER; | 
|  | handle_led(hw, LED_S0_OFF); | 
|  | break; | 
|  |  | 
|  | case (2): | 
|  | if (hw->nt_timer < 0) { | 
|  | hw->nt_timer = 0; | 
|  | hw->timers &= ~NT_ACTIVATION_TIMER; | 
|  | hfcsusb_ph_command(dch->hw, HFC_L1_DEACTIVATE_NT); | 
|  | } else { | 
|  | hw->timers |= NT_ACTIVATION_TIMER; | 
|  | hw->nt_timer = NT_T1_COUNT; | 
|  | /* allow G2 -> G3 transition */ | 
|  | write_reg(hw, HFCUSB_STATES, 2 | HFCUSB_NT_G2_G3); | 
|  | } | 
|  | break; | 
|  | case (3): | 
|  | hw->nt_timer = 0; | 
|  | hw->timers &= ~NT_ACTIVATION_TIMER; | 
|  | test_and_set_bit(FLG_ACTIVE, &dch->Flags); | 
|  | _queue_data(&dch->dev.D, PH_ACTIVATE_IND, | 
|  | MISDN_ID_ANY, 0, NULL, GFP_ATOMIC); | 
|  | handle_led(hw, LED_S0_ON); | 
|  | break; | 
|  | case (4): | 
|  | hw->nt_timer = 0; | 
|  | hw->timers &= ~NT_ACTIVATION_TIMER; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | hfcsusb_ph_info(hw); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ph_state(struct dchannel *dch) | 
|  | { | 
|  | struct hfcsusb *hw = dch->hw; | 
|  |  | 
|  | if (hw->protocol == ISDN_P_NT_S0) | 
|  | ph_state_nt(dch); | 
|  | else if (hw->protocol == ISDN_P_TE_S0) | 
|  | ph_state_te(dch); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * disable/enable BChannel for desired protocoll | 
|  | */ | 
|  | static int | 
|  | hfcsusb_setup_bch(struct bchannel *bch, int protocol) | 
|  | { | 
|  | struct hfcsusb *hw = bch->hw; | 
|  | __u8 conhdlc, sctrl, sctrl_r; | 
|  |  | 
|  | if (debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: %s: protocol %x-->%x B%d\n", | 
|  | hw->name, __func__, bch->state, protocol, | 
|  | bch->nr); | 
|  |  | 
|  | /* setup val for CON_HDLC */ | 
|  | conhdlc = 0; | 
|  | if (protocol > ISDN_P_NONE) | 
|  | conhdlc = 8;	/* enable FIFO */ | 
|  |  | 
|  | switch (protocol) { | 
|  | case (-1):	/* used for init */ | 
|  | bch->state = -1; | 
|  | /* fall trough */ | 
|  | case (ISDN_P_NONE): | 
|  | if (bch->state == ISDN_P_NONE) | 
|  | return 0; /* already in idle state */ | 
|  | bch->state = ISDN_P_NONE; | 
|  | clear_bit(FLG_HDLC, &bch->Flags); | 
|  | clear_bit(FLG_TRANSPARENT, &bch->Flags); | 
|  | break; | 
|  | case (ISDN_P_B_RAW): | 
|  | conhdlc |= 2; | 
|  | bch->state = protocol; | 
|  | set_bit(FLG_TRANSPARENT, &bch->Flags); | 
|  | break; | 
|  | case (ISDN_P_B_HDLC): | 
|  | bch->state = protocol; | 
|  | set_bit(FLG_HDLC, &bch->Flags); | 
|  | break; | 
|  | default: | 
|  | if (debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: %s: prot not known %x\n", | 
|  | hw->name, __func__, protocol); | 
|  | return -ENOPROTOOPT; | 
|  | } | 
|  |  | 
|  | if (protocol >= ISDN_P_NONE) { | 
|  | write_reg(hw, HFCUSB_FIFO, (bch->nr == 1) ? 0 : 2); | 
|  | write_reg(hw, HFCUSB_CON_HDLC, conhdlc); | 
|  | write_reg(hw, HFCUSB_INC_RES_F, 2); | 
|  | write_reg(hw, HFCUSB_FIFO, (bch->nr == 1) ? 1 : 3); | 
|  | write_reg(hw, HFCUSB_CON_HDLC, conhdlc); | 
|  | write_reg(hw, HFCUSB_INC_RES_F, 2); | 
|  |  | 
|  | sctrl = 0x40 + ((hw->protocol == ISDN_P_TE_S0) ? 0x00 : 0x04); | 
|  | sctrl_r = 0x0; | 
|  | if (test_bit(FLG_ACTIVE, &hw->bch[0].Flags)) { | 
|  | sctrl |= 1; | 
|  | sctrl_r |= 1; | 
|  | } | 
|  | if (test_bit(FLG_ACTIVE, &hw->bch[1].Flags)) { | 
|  | sctrl |= 2; | 
|  | sctrl_r |= 2; | 
|  | } | 
|  | write_reg(hw, HFCUSB_SCTRL, sctrl); | 
|  | write_reg(hw, HFCUSB_SCTRL_R, sctrl_r); | 
|  |  | 
|  | if (protocol > ISDN_P_NONE) | 
|  | handle_led(hw, (bch->nr == 1) ? LED_B1_ON : LED_B2_ON); | 
|  | else | 
|  | handle_led(hw, (bch->nr == 1) ? LED_B1_OFF : | 
|  | LED_B2_OFF); | 
|  | } | 
|  | hfcsusb_ph_info(hw); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | hfcsusb_ph_command(struct hfcsusb *hw, u_char command) | 
|  | { | 
|  | if (debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: %s: %x\n", | 
|  | hw->name, __func__, command); | 
|  |  | 
|  | switch (command) { | 
|  | case HFC_L1_ACTIVATE_TE: | 
|  | /* force sending sending INFO1 */ | 
|  | write_reg(hw, HFCUSB_STATES, 0x14); | 
|  | /* start l1 activation */ | 
|  | write_reg(hw, HFCUSB_STATES, 0x04); | 
|  | break; | 
|  |  | 
|  | case HFC_L1_FORCE_DEACTIVATE_TE: | 
|  | write_reg(hw, HFCUSB_STATES, 0x10); | 
|  | write_reg(hw, HFCUSB_STATES, 0x03); | 
|  | break; | 
|  |  | 
|  | case HFC_L1_ACTIVATE_NT: | 
|  | if (hw->dch.state == 3) | 
|  | _queue_data(&hw->dch.dev.D, PH_ACTIVATE_IND, | 
|  | MISDN_ID_ANY, 0, NULL, GFP_ATOMIC); | 
|  | else | 
|  | write_reg(hw, HFCUSB_STATES, HFCUSB_ACTIVATE | | 
|  | HFCUSB_DO_ACTION | HFCUSB_NT_G2_G3); | 
|  | break; | 
|  |  | 
|  | case HFC_L1_DEACTIVATE_NT: | 
|  | write_reg(hw, HFCUSB_STATES, | 
|  | HFCUSB_DO_ACTION); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Layer 1 B-channel hardware access | 
|  | */ | 
|  | static int | 
|  | channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq) | 
|  | { | 
|  | int	ret = 0; | 
|  |  | 
|  | switch (cq->op) { | 
|  | case MISDN_CTRL_GETOP: | 
|  | cq->op = MISDN_CTRL_FILL_EMPTY; | 
|  | break; | 
|  | case MISDN_CTRL_FILL_EMPTY: /* fill fifo, if empty */ | 
|  | test_and_set_bit(FLG_FILLEMPTY, &bch->Flags); | 
|  | if (debug & DEBUG_HW_OPEN) | 
|  | printk(KERN_DEBUG "%s: FILL_EMPTY request (nr=%d " | 
|  | "off=%d)\n", __func__, bch->nr, !!cq->p1); | 
|  | break; | 
|  | default: | 
|  | printk(KERN_WARNING "%s: unknown Op %x\n", __func__, cq->op); | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* collect data from incoming interrupt or isochron USB data */ | 
|  | static void | 
|  | hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len, | 
|  | int finish) | 
|  | { | 
|  | struct hfcsusb	*hw = fifo->hw; | 
|  | struct sk_buff	*rx_skb = NULL; | 
|  | int		maxlen = 0; | 
|  | int		fifon = fifo->fifonum; | 
|  | int		i; | 
|  | int		hdlc = 0; | 
|  |  | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s: fifo(%i) len(%i) " | 
|  | "dch(%p) bch(%p) ech(%p)\n", | 
|  | hw->name, __func__, fifon, len, | 
|  | fifo->dch, fifo->bch, fifo->ech); | 
|  |  | 
|  | if (!len) | 
|  | return; | 
|  |  | 
|  | if ((!!fifo->dch + !!fifo->bch + !!fifo->ech) != 1) { | 
|  | printk(KERN_DEBUG "%s: %s: undefined channel\n", | 
|  | hw->name, __func__); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock(&hw->lock); | 
|  | if (fifo->dch) { | 
|  | rx_skb = fifo->dch->rx_skb; | 
|  | maxlen = fifo->dch->maxlen; | 
|  | hdlc = 1; | 
|  | } | 
|  | if (fifo->bch) { | 
|  | rx_skb = fifo->bch->rx_skb; | 
|  | maxlen = fifo->bch->maxlen; | 
|  | hdlc = test_bit(FLG_HDLC, &fifo->bch->Flags); | 
|  | } | 
|  | if (fifo->ech) { | 
|  | rx_skb = fifo->ech->rx_skb; | 
|  | maxlen = fifo->ech->maxlen; | 
|  | hdlc = 1; | 
|  | } | 
|  |  | 
|  | if (!rx_skb) { | 
|  | rx_skb = mI_alloc_skb(maxlen, GFP_ATOMIC); | 
|  | if (rx_skb) { | 
|  | if (fifo->dch) | 
|  | fifo->dch->rx_skb = rx_skb; | 
|  | if (fifo->bch) | 
|  | fifo->bch->rx_skb = rx_skb; | 
|  | if (fifo->ech) | 
|  | fifo->ech->rx_skb = rx_skb; | 
|  | skb_trim(rx_skb, 0); | 
|  | } else { | 
|  | printk(KERN_DEBUG "%s: %s: No mem for rx_skb\n", | 
|  | hw->name, __func__); | 
|  | spin_unlock(&hw->lock); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (fifo->dch || fifo->ech) { | 
|  | /* D/E-Channel SKB range check */ | 
|  | if ((rx_skb->len + len) >= MAX_DFRAME_LEN_L1) { | 
|  | printk(KERN_DEBUG "%s: %s: sbk mem exceeded " | 
|  | "for fifo(%d) HFCUSB_D_RX\n", | 
|  | hw->name, __func__, fifon); | 
|  | skb_trim(rx_skb, 0); | 
|  | spin_unlock(&hw->lock); | 
|  | return; | 
|  | } | 
|  | } else if (fifo->bch) { | 
|  | /* B-Channel SKB range check */ | 
|  | if ((rx_skb->len + len) >= (MAX_BCH_SIZE + 3)) { | 
|  | printk(KERN_DEBUG "%s: %s: sbk mem exceeded " | 
|  | "for fifo(%d) HFCUSB_B_RX\n", | 
|  | hw->name, __func__, fifon); | 
|  | skb_trim(rx_skb, 0); | 
|  | spin_unlock(&hw->lock); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | memcpy(skb_put(rx_skb, len), data, len); | 
|  |  | 
|  | if (hdlc) { | 
|  | /* we have a complete hdlc packet */ | 
|  | if (finish) { | 
|  | if ((rx_skb->len > 3) && | 
|  | (!(rx_skb->data[rx_skb->len - 1]))) { | 
|  | if (debug & DBG_HFC_FIFO_VERBOSE) { | 
|  | printk(KERN_DEBUG "%s: %s: fifon(%i)" | 
|  | " new RX len(%i): ", | 
|  | hw->name, __func__, fifon, | 
|  | rx_skb->len); | 
|  | i = 0; | 
|  | while (i < rx_skb->len) | 
|  | printk("%02x ", | 
|  | rx_skb->data[i++]); | 
|  | printk("\n"); | 
|  | } | 
|  |  | 
|  | /* remove CRC & status */ | 
|  | skb_trim(rx_skb, rx_skb->len - 3); | 
|  |  | 
|  | if (fifo->dch) | 
|  | recv_Dchannel(fifo->dch); | 
|  | if (fifo->bch) | 
|  | recv_Bchannel(fifo->bch); | 
|  | if (fifo->ech) | 
|  | recv_Echannel(fifo->ech, | 
|  | &hw->dch); | 
|  | } else { | 
|  | if (debug & DBG_HFC_FIFO_VERBOSE) { | 
|  | printk(KERN_DEBUG | 
|  | "%s: CRC or minlen ERROR fifon(%i) " | 
|  | "RX len(%i): ", | 
|  | hw->name, fifon, rx_skb->len); | 
|  | i = 0; | 
|  | while (i < rx_skb->len) | 
|  | printk("%02x ", | 
|  | rx_skb->data[i++]); | 
|  | printk("\n"); | 
|  | } | 
|  | skb_trim(rx_skb, 0); | 
|  | } | 
|  | } | 
|  | } else { | 
|  | /* deliver transparent data to layer2 */ | 
|  | if (rx_skb->len >= poll) | 
|  | recv_Bchannel(fifo->bch); | 
|  | } | 
|  | spin_unlock(&hw->lock); | 
|  | } | 
|  |  | 
|  | static void | 
|  | fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe, | 
|  | void *buf, int num_packets, int packet_size, int interval, | 
|  | usb_complete_t complete, void *context) | 
|  | { | 
|  | int k; | 
|  |  | 
|  | usb_fill_bulk_urb(urb, dev, pipe, buf, packet_size * num_packets, | 
|  | complete, context); | 
|  |  | 
|  | urb->number_of_packets = num_packets; | 
|  | urb->transfer_flags = URB_ISO_ASAP; | 
|  | urb->actual_length = 0; | 
|  | urb->interval = interval; | 
|  |  | 
|  | for (k = 0; k < num_packets; k++) { | 
|  | urb->iso_frame_desc[k].offset = packet_size * k; | 
|  | urb->iso_frame_desc[k].length = packet_size; | 
|  | urb->iso_frame_desc[k].actual_length = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* receive completion routine for all ISO tx fifos   */ | 
|  | static void | 
|  | rx_iso_complete(struct urb *urb) | 
|  | { | 
|  | struct iso_urb *context_iso_urb = (struct iso_urb *) urb->context; | 
|  | struct usb_fifo *fifo = context_iso_urb->owner_fifo; | 
|  | struct hfcsusb *hw = fifo->hw; | 
|  | int k, len, errcode, offset, num_isoc_packets, fifon, maxlen, | 
|  | status, iso_status, i; | 
|  | __u8 *buf; | 
|  | static __u8 eof[8]; | 
|  | __u8 s0_state; | 
|  |  | 
|  | fifon = fifo->fifonum; | 
|  | status = urb->status; | 
|  |  | 
|  | spin_lock(&hw->lock); | 
|  | if (fifo->stop_gracefull) { | 
|  | fifo->stop_gracefull = 0; | 
|  | fifo->active = 0; | 
|  | spin_unlock(&hw->lock); | 
|  | return; | 
|  | } | 
|  | spin_unlock(&hw->lock); | 
|  |  | 
|  | /* | 
|  | * ISO transfer only partially completed, | 
|  | * look at individual frame status for details | 
|  | */ | 
|  | if (status == -EXDEV) { | 
|  | if (debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: %s: with -EXDEV " | 
|  | "urb->status %d, fifonum %d\n", | 
|  | hw->name, __func__,  status, fifon); | 
|  |  | 
|  | /* clear status, so go on with ISO transfers */ | 
|  | status = 0; | 
|  | } | 
|  |  | 
|  | s0_state = 0; | 
|  | if (fifo->active && !status) { | 
|  | num_isoc_packets = iso_packets[fifon]; | 
|  | maxlen = fifo->usb_packet_maxlen; | 
|  |  | 
|  | for (k = 0; k < num_isoc_packets; ++k) { | 
|  | len = urb->iso_frame_desc[k].actual_length; | 
|  | offset = urb->iso_frame_desc[k].offset; | 
|  | buf = context_iso_urb->buffer + offset; | 
|  | iso_status = urb->iso_frame_desc[k].status; | 
|  |  | 
|  | if (iso_status && (debug & DBG_HFC_FIFO_VERBOSE)) { | 
|  | printk(KERN_DEBUG "%s: %s: " | 
|  | "ISO packet %i, status: %i\n", | 
|  | hw->name, __func__, k, iso_status); | 
|  | } | 
|  |  | 
|  | /* USB data log for every D ISO in */ | 
|  | if ((fifon == HFCUSB_D_RX) && | 
|  | (debug & DBG_HFC_USB_VERBOSE)) { | 
|  | printk(KERN_DEBUG | 
|  | "%s: %s: %d (%d/%d) len(%d) ", | 
|  | hw->name, __func__, urb->start_frame, | 
|  | k, num_isoc_packets-1, | 
|  | len); | 
|  | for (i = 0; i < len; i++) | 
|  | printk("%x ", buf[i]); | 
|  | printk("\n"); | 
|  | } | 
|  |  | 
|  | if (!iso_status) { | 
|  | if (fifo->last_urblen != maxlen) { | 
|  | /* | 
|  | * save fifo fill-level threshold bits | 
|  | * to use them later in TX ISO URB | 
|  | * completions | 
|  | */ | 
|  | hw->threshold_mask = buf[1]; | 
|  |  | 
|  | if (fifon == HFCUSB_D_RX) | 
|  | s0_state = (buf[0] >> 4); | 
|  |  | 
|  | eof[fifon] = buf[0] & 1; | 
|  | if (len > 2) | 
|  | hfcsusb_rx_frame(fifo, buf + 2, | 
|  | len - 2, (len < maxlen) | 
|  | ? eof[fifon] : 0); | 
|  | } else | 
|  | hfcsusb_rx_frame(fifo, buf, len, | 
|  | (len < maxlen) ? | 
|  | eof[fifon] : 0); | 
|  | fifo->last_urblen = len; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* signal S0 layer1 state change */ | 
|  | if ((s0_state) && (hw->initdone) && | 
|  | (s0_state != hw->dch.state)) { | 
|  | hw->dch.state = s0_state; | 
|  | schedule_event(&hw->dch, FLG_PHCHANGE); | 
|  | } | 
|  |  | 
|  | fill_isoc_urb(urb, fifo->hw->dev, fifo->pipe, | 
|  | context_iso_urb->buffer, num_isoc_packets, | 
|  | fifo->usb_packet_maxlen, fifo->intervall, | 
|  | (usb_complete_t)rx_iso_complete, urb->context); | 
|  | errcode = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | if (errcode < 0) { | 
|  | if (debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: %s: error submitting " | 
|  | "ISO URB: %d\n", | 
|  | hw->name, __func__, errcode); | 
|  | } | 
|  | } else { | 
|  | if (status && (debug & DBG_HFC_URB_INFO)) | 
|  | printk(KERN_DEBUG "%s: %s: rx_iso_complete : " | 
|  | "urb->status %d, fifonum %d\n", | 
|  | hw->name, __func__, status, fifon); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* receive completion routine for all interrupt rx fifos */ | 
|  | static void | 
|  | rx_int_complete(struct urb *urb) | 
|  | { | 
|  | int len, status, i; | 
|  | __u8 *buf, maxlen, fifon; | 
|  | struct usb_fifo *fifo = (struct usb_fifo *) urb->context; | 
|  | struct hfcsusb *hw = fifo->hw; | 
|  | static __u8 eof[8]; | 
|  |  | 
|  | spin_lock(&hw->lock); | 
|  | if (fifo->stop_gracefull) { | 
|  | fifo->stop_gracefull = 0; | 
|  | fifo->active = 0; | 
|  | spin_unlock(&hw->lock); | 
|  | return; | 
|  | } | 
|  | spin_unlock(&hw->lock); | 
|  |  | 
|  | fifon = fifo->fifonum; | 
|  | if ((!fifo->active) || (urb->status)) { | 
|  | if (debug & DBG_HFC_URB_ERROR) | 
|  | printk(KERN_DEBUG | 
|  | "%s: %s: RX-Fifo %i is going down (%i)\n", | 
|  | hw->name, __func__, fifon, urb->status); | 
|  |  | 
|  | fifo->urb->interval = 0; /* cancel automatic rescheduling */ | 
|  | return; | 
|  | } | 
|  | len = urb->actual_length; | 
|  | buf = fifo->buffer; | 
|  | maxlen = fifo->usb_packet_maxlen; | 
|  |  | 
|  | /* USB data log for every D INT in */ | 
|  | if ((fifon == HFCUSB_D_RX) && (debug & DBG_HFC_USB_VERBOSE)) { | 
|  | printk(KERN_DEBUG "%s: %s: D RX INT len(%d) ", | 
|  | hw->name, __func__, len); | 
|  | for (i = 0; i < len; i++) | 
|  | printk("%02x ", buf[i]); | 
|  | printk("\n"); | 
|  | } | 
|  |  | 
|  | if (fifo->last_urblen != fifo->usb_packet_maxlen) { | 
|  | /* the threshold mask is in the 2nd status byte */ | 
|  | hw->threshold_mask = buf[1]; | 
|  |  | 
|  | /* signal S0 layer1 state change */ | 
|  | if (hw->initdone && ((buf[0] >> 4) != hw->dch.state)) { | 
|  | hw->dch.state = (buf[0] >> 4); | 
|  | schedule_event(&hw->dch, FLG_PHCHANGE); | 
|  | } | 
|  |  | 
|  | eof[fifon] = buf[0] & 1; | 
|  | /* if we have more than the 2 status bytes -> collect data */ | 
|  | if (len > 2) | 
|  | hfcsusb_rx_frame(fifo, buf + 2, | 
|  | urb->actual_length - 2, | 
|  | (len < maxlen) ? eof[fifon] : 0); | 
|  | } else { | 
|  | hfcsusb_rx_frame(fifo, buf, urb->actual_length, | 
|  | (len < maxlen) ? eof[fifon] : 0); | 
|  | } | 
|  | fifo->last_urblen = urb->actual_length; | 
|  |  | 
|  | status = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | if (status) { | 
|  | if (debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: %s: error resubmitting USB\n", | 
|  | hw->name, __func__); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* transmit completion routine for all ISO tx fifos */ | 
|  | static void | 
|  | tx_iso_complete(struct urb *urb) | 
|  | { | 
|  | struct iso_urb *context_iso_urb = (struct iso_urb *) urb->context; | 
|  | struct usb_fifo *fifo = context_iso_urb->owner_fifo; | 
|  | struct hfcsusb *hw = fifo->hw; | 
|  | struct sk_buff *tx_skb; | 
|  | int k, tx_offset, num_isoc_packets, sink, remain, current_len, | 
|  | errcode, hdlc, i; | 
|  | int *tx_idx; | 
|  | int frame_complete, fifon, status; | 
|  | __u8 threshbit; | 
|  |  | 
|  | spin_lock(&hw->lock); | 
|  | if (fifo->stop_gracefull) { | 
|  | fifo->stop_gracefull = 0; | 
|  | fifo->active = 0; | 
|  | spin_unlock(&hw->lock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (fifo->dch) { | 
|  | tx_skb = fifo->dch->tx_skb; | 
|  | tx_idx = &fifo->dch->tx_idx; | 
|  | hdlc = 1; | 
|  | } else if (fifo->bch) { | 
|  | tx_skb = fifo->bch->tx_skb; | 
|  | tx_idx = &fifo->bch->tx_idx; | 
|  | hdlc = test_bit(FLG_HDLC, &fifo->bch->Flags); | 
|  | } else { | 
|  | printk(KERN_DEBUG "%s: %s: neither BCH nor DCH\n", | 
|  | hw->name, __func__); | 
|  | spin_unlock(&hw->lock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | fifon = fifo->fifonum; | 
|  | status = urb->status; | 
|  |  | 
|  | tx_offset = 0; | 
|  |  | 
|  | /* | 
|  | * ISO transfer only partially completed, | 
|  | * look at individual frame status for details | 
|  | */ | 
|  | if (status == -EXDEV) { | 
|  | if (debug & DBG_HFC_URB_ERROR) | 
|  | printk(KERN_DEBUG "%s: %s: " | 
|  | "-EXDEV (%i) fifon (%d)\n", | 
|  | hw->name, __func__, status, fifon); | 
|  |  | 
|  | /* clear status, so go on with ISO transfers */ | 
|  | status = 0; | 
|  | } | 
|  |  | 
|  | if (fifo->active && !status) { | 
|  | /* is FifoFull-threshold set for our channel? */ | 
|  | threshbit = (hw->threshold_mask & (1 << fifon)); | 
|  | num_isoc_packets = iso_packets[fifon]; | 
|  |  | 
|  | /* predict dataflow to avoid fifo overflow */ | 
|  | if (fifon >= HFCUSB_D_TX) | 
|  | sink = (threshbit) ? SINK_DMIN : SINK_DMAX; | 
|  | else | 
|  | sink = (threshbit) ? SINK_MIN : SINK_MAX; | 
|  | fill_isoc_urb(urb, fifo->hw->dev, fifo->pipe, | 
|  | context_iso_urb->buffer, num_isoc_packets, | 
|  | fifo->usb_packet_maxlen, fifo->intervall, | 
|  | (usb_complete_t)tx_iso_complete, urb->context); | 
|  | memset(context_iso_urb->buffer, 0, | 
|  | sizeof(context_iso_urb->buffer)); | 
|  | frame_complete = 0; | 
|  |  | 
|  | for (k = 0; k < num_isoc_packets; ++k) { | 
|  | /* analyze tx success of previous ISO packets */ | 
|  | if (debug & DBG_HFC_URB_ERROR) { | 
|  | errcode = urb->iso_frame_desc[k].status; | 
|  | if (errcode) { | 
|  | printk(KERN_DEBUG "%s: %s: " | 
|  | "ISO packet %i, status: %i\n", | 
|  | hw->name, __func__, k, errcode); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Generate next ISO Packets */ | 
|  | if (tx_skb) | 
|  | remain = tx_skb->len - *tx_idx; | 
|  | else | 
|  | remain = 0; | 
|  |  | 
|  | if (remain > 0) { | 
|  | fifo->bit_line -= sink; | 
|  | current_len = (0 - fifo->bit_line) / 8; | 
|  | if (current_len > 14) | 
|  | current_len = 14; | 
|  | if (current_len < 0) | 
|  | current_len = 0; | 
|  | if (remain < current_len) | 
|  | current_len = remain; | 
|  |  | 
|  | /* how much bit do we put on the line? */ | 
|  | fifo->bit_line += current_len * 8; | 
|  |  | 
|  | context_iso_urb->buffer[tx_offset] = 0; | 
|  | if (current_len == remain) { | 
|  | if (hdlc) { | 
|  | /* signal frame completion */ | 
|  | context_iso_urb-> | 
|  | buffer[tx_offset] = 1; | 
|  | /* add 2 byte flags and 16bit | 
|  | * CRC at end of ISDN frame */ | 
|  | fifo->bit_line += 32; | 
|  | } | 
|  | frame_complete = 1; | 
|  | } | 
|  |  | 
|  | /* copy tx data to iso-urb buffer */ | 
|  | memcpy(context_iso_urb->buffer + tx_offset + 1, | 
|  | (tx_skb->data + *tx_idx), current_len); | 
|  | *tx_idx += current_len; | 
|  |  | 
|  | urb->iso_frame_desc[k].offset = tx_offset; | 
|  | urb->iso_frame_desc[k].length = current_len + 1; | 
|  |  | 
|  | /* USB data log for every D ISO out */ | 
|  | if ((fifon == HFCUSB_D_RX) && | 
|  | (debug & DBG_HFC_USB_VERBOSE)) { | 
|  | printk(KERN_DEBUG | 
|  | "%s: %s (%d/%d) offs(%d) len(%d) ", | 
|  | hw->name, __func__, | 
|  | k, num_isoc_packets-1, | 
|  | urb->iso_frame_desc[k].offset, | 
|  | urb->iso_frame_desc[k].length); | 
|  |  | 
|  | for (i = urb->iso_frame_desc[k].offset; | 
|  | i < (urb->iso_frame_desc[k].offset | 
|  | + urb->iso_frame_desc[k].length); | 
|  | i++) | 
|  | printk("%x ", | 
|  | context_iso_urb->buffer[i]); | 
|  |  | 
|  | printk(" skb->len(%i) tx-idx(%d)\n", | 
|  | tx_skb->len, *tx_idx); | 
|  | } | 
|  |  | 
|  | tx_offset += (current_len + 1); | 
|  | } else { | 
|  | urb->iso_frame_desc[k].offset = tx_offset++; | 
|  | urb->iso_frame_desc[k].length = 1; | 
|  | /* we lower data margin every msec */ | 
|  | fifo->bit_line -= sink; | 
|  | if (fifo->bit_line < BITLINE_INF) | 
|  | fifo->bit_line = BITLINE_INF; | 
|  | } | 
|  |  | 
|  | if (frame_complete) { | 
|  | frame_complete = 0; | 
|  |  | 
|  | if (debug & DBG_HFC_FIFO_VERBOSE) { | 
|  | printk(KERN_DEBUG  "%s: %s: " | 
|  | "fifon(%i) new TX len(%i): ", | 
|  | hw->name, __func__, | 
|  | fifon, tx_skb->len); | 
|  | i = 0; | 
|  | while (i < tx_skb->len) | 
|  | printk("%02x ", | 
|  | tx_skb->data[i++]); | 
|  | printk("\n"); | 
|  | } | 
|  |  | 
|  | dev_kfree_skb(tx_skb); | 
|  | tx_skb = NULL; | 
|  | if (fifo->dch && get_next_dframe(fifo->dch)) | 
|  | tx_skb = fifo->dch->tx_skb; | 
|  | else if (fifo->bch && | 
|  | get_next_bframe(fifo->bch)) { | 
|  | if (test_bit(FLG_TRANSPARENT, | 
|  | &fifo->bch->Flags)) | 
|  | confirm_Bsend(fifo->bch); | 
|  | tx_skb = fifo->bch->tx_skb; | 
|  | } | 
|  | } | 
|  | } | 
|  | errcode = usb_submit_urb(urb, GFP_ATOMIC); | 
|  | if (errcode < 0) { | 
|  | if (debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG | 
|  | "%s: %s: error submitting ISO URB: %d \n", | 
|  | hw->name, __func__, errcode); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * abuse DChannel tx iso completion to trigger NT mode state | 
|  | * changes tx_iso_complete is assumed to be called every | 
|  | * fifo->intervall (ms) | 
|  | */ | 
|  | if ((fifon == HFCUSB_D_TX) && (hw->protocol == ISDN_P_NT_S0) | 
|  | && (hw->timers & NT_ACTIVATION_TIMER)) { | 
|  | if ((--hw->nt_timer) < 0) | 
|  | schedule_event(&hw->dch, FLG_PHCHANGE); | 
|  | } | 
|  |  | 
|  | } else { | 
|  | if (status && (debug & DBG_HFC_URB_ERROR)) | 
|  | printk(KERN_DEBUG  "%s: %s: urb->status %s (%i)" | 
|  | "fifonum=%d\n", | 
|  | hw->name, __func__, | 
|  | symbolic(urb_errlist, status), status, fifon); | 
|  | } | 
|  | spin_unlock(&hw->lock); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * allocs urbs and start isoc transfer with two pending urbs to avoid | 
|  | * gaps in the transfer chain | 
|  | */ | 
|  | static int | 
|  | start_isoc_chain(struct usb_fifo *fifo, int num_packets_per_urb, | 
|  | usb_complete_t complete, int packet_size) | 
|  | { | 
|  | struct hfcsusb *hw = fifo->hw; | 
|  | int i, k, errcode; | 
|  |  | 
|  | if (debug) | 
|  | printk(KERN_DEBUG "%s: %s: fifo %i\n", | 
|  | hw->name, __func__, fifo->fifonum); | 
|  |  | 
|  | /* allocate Memory for Iso out Urbs */ | 
|  | for (i = 0; i < 2; i++) { | 
|  | if (!(fifo->iso[i].urb)) { | 
|  | fifo->iso[i].urb = | 
|  | usb_alloc_urb(num_packets_per_urb, GFP_KERNEL); | 
|  | if (!(fifo->iso[i].urb)) { | 
|  | printk(KERN_DEBUG | 
|  | "%s: %s: alloc urb for fifo %i failed", | 
|  | hw->name, __func__, fifo->fifonum); | 
|  | } | 
|  | fifo->iso[i].owner_fifo = (struct usb_fifo *) fifo; | 
|  | fifo->iso[i].indx = i; | 
|  |  | 
|  | /* Init the first iso */ | 
|  | if (ISO_BUFFER_SIZE >= | 
|  | (fifo->usb_packet_maxlen * | 
|  | num_packets_per_urb)) { | 
|  | fill_isoc_urb(fifo->iso[i].urb, | 
|  | fifo->hw->dev, fifo->pipe, | 
|  | fifo->iso[i].buffer, | 
|  | num_packets_per_urb, | 
|  | fifo->usb_packet_maxlen, | 
|  | fifo->intervall, complete, | 
|  | &fifo->iso[i]); | 
|  | memset(fifo->iso[i].buffer, 0, | 
|  | sizeof(fifo->iso[i].buffer)); | 
|  |  | 
|  | for (k = 0; k < num_packets_per_urb; k++) { | 
|  | fifo->iso[i].urb-> | 
|  | iso_frame_desc[k].offset = | 
|  | k * packet_size; | 
|  | fifo->iso[i].urb-> | 
|  | iso_frame_desc[k].length = | 
|  | packet_size; | 
|  | } | 
|  | } else { | 
|  | printk(KERN_DEBUG | 
|  | "%s: %s: ISO Buffer size to small!\n", | 
|  | hw->name, __func__); | 
|  | } | 
|  | } | 
|  | fifo->bit_line = BITLINE_INF; | 
|  |  | 
|  | errcode = usb_submit_urb(fifo->iso[i].urb, GFP_KERNEL); | 
|  | fifo->active = (errcode >= 0) ? 1 : 0; | 
|  | fifo->stop_gracefull = 0; | 
|  | if (errcode < 0) { | 
|  | printk(KERN_DEBUG "%s: %s: %s URB nr:%d\n", | 
|  | hw->name, __func__, | 
|  | symbolic(urb_errlist, errcode), i); | 
|  | } | 
|  | } | 
|  | return fifo->active; | 
|  | } | 
|  |  | 
|  | static void | 
|  | stop_iso_gracefull(struct usb_fifo *fifo) | 
|  | { | 
|  | struct hfcsusb *hw = fifo->hw; | 
|  | int i, timeout; | 
|  | u_long flags; | 
|  |  | 
|  | for (i = 0; i < 2; i++) { | 
|  | spin_lock_irqsave(&hw->lock, flags); | 
|  | if (debug) | 
|  | printk(KERN_DEBUG "%s: %s for fifo %i.%i\n", | 
|  | hw->name, __func__, fifo->fifonum, i); | 
|  | fifo->stop_gracefull = 1; | 
|  | spin_unlock_irqrestore(&hw->lock, flags); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 2; i++) { | 
|  | timeout = 3; | 
|  | while (fifo->stop_gracefull && timeout--) | 
|  | schedule_timeout_interruptible((HZ/1000)*16); | 
|  | if (debug && fifo->stop_gracefull) | 
|  | printk(KERN_DEBUG "%s: ERROR %s for fifo %i.%i\n", | 
|  | hw->name, __func__, fifo->fifonum, i); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | stop_int_gracefull(struct usb_fifo *fifo) | 
|  | { | 
|  | struct hfcsusb *hw = fifo->hw; | 
|  | int timeout; | 
|  | u_long flags; | 
|  |  | 
|  | spin_lock_irqsave(&hw->lock, flags); | 
|  | if (debug) | 
|  | printk(KERN_DEBUG "%s: %s for fifo %i\n", | 
|  | hw->name, __func__, fifo->fifonum); | 
|  | fifo->stop_gracefull = 1; | 
|  | spin_unlock_irqrestore(&hw->lock, flags); | 
|  |  | 
|  | timeout = 3; | 
|  | while (fifo->stop_gracefull && timeout--) | 
|  | schedule_timeout_interruptible((HZ/1000)*3); | 
|  | if (debug && fifo->stop_gracefull) | 
|  | printk(KERN_DEBUG "%s: ERROR %s for fifo %i\n", | 
|  | hw->name, __func__, fifo->fifonum); | 
|  | } | 
|  |  | 
|  | /* start the interrupt transfer for the given fifo */ | 
|  | static void | 
|  | start_int_fifo(struct usb_fifo *fifo) | 
|  | { | 
|  | struct hfcsusb *hw = fifo->hw; | 
|  | int errcode; | 
|  |  | 
|  | if (debug) | 
|  | printk(KERN_DEBUG "%s: %s: INT IN fifo:%d\n", | 
|  | hw->name, __func__, fifo->fifonum); | 
|  |  | 
|  | if (!fifo->urb) { | 
|  | fifo->urb = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!fifo->urb) | 
|  | return; | 
|  | } | 
|  | usb_fill_int_urb(fifo->urb, fifo->hw->dev, fifo->pipe, | 
|  | fifo->buffer, fifo->usb_packet_maxlen, | 
|  | (usb_complete_t)rx_int_complete, fifo, fifo->intervall); | 
|  | fifo->active = 1; | 
|  | fifo->stop_gracefull = 0; | 
|  | errcode = usb_submit_urb(fifo->urb, GFP_KERNEL); | 
|  | if (errcode) { | 
|  | printk(KERN_DEBUG "%s: %s: submit URB: status:%i\n", | 
|  | hw->name, __func__, errcode); | 
|  | fifo->active = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | setPortMode(struct hfcsusb *hw) | 
|  | { | 
|  | if (debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: %s %s\n", hw->name, __func__, | 
|  | (hw->protocol == ISDN_P_TE_S0) ? "TE" : "NT"); | 
|  |  | 
|  | if (hw->protocol == ISDN_P_TE_S0) { | 
|  | write_reg(hw, HFCUSB_SCTRL, 0x40); | 
|  | write_reg(hw, HFCUSB_SCTRL_E, 0x00); | 
|  | write_reg(hw, HFCUSB_CLKDEL, CLKDEL_TE); | 
|  | write_reg(hw, HFCUSB_STATES, 3 | 0x10); | 
|  | write_reg(hw, HFCUSB_STATES, 3); | 
|  | } else { | 
|  | write_reg(hw, HFCUSB_SCTRL, 0x44); | 
|  | write_reg(hw, HFCUSB_SCTRL_E, 0x09); | 
|  | write_reg(hw, HFCUSB_CLKDEL, CLKDEL_NT); | 
|  | write_reg(hw, HFCUSB_STATES, 1 | 0x10); | 
|  | write_reg(hw, HFCUSB_STATES, 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | reset_hfcsusb(struct hfcsusb *hw) | 
|  | { | 
|  | struct usb_fifo *fifo; | 
|  | int i; | 
|  |  | 
|  | if (debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); | 
|  |  | 
|  | /* do Chip reset */ | 
|  | write_reg(hw, HFCUSB_CIRM, 8); | 
|  |  | 
|  | /* aux = output, reset off */ | 
|  | write_reg(hw, HFCUSB_CIRM, 0x10); | 
|  |  | 
|  | /* set USB_SIZE to match the wMaxPacketSize for INT or BULK transfers */ | 
|  | write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) | | 
|  | ((hw->packet_size / 8) << 4)); | 
|  |  | 
|  | /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */ | 
|  | write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size); | 
|  |  | 
|  | /* enable PCM/GCI master mode */ | 
|  | write_reg(hw, HFCUSB_MST_MODE1, 0);	/* set default values */ | 
|  | write_reg(hw, HFCUSB_MST_MODE0, 1);	/* enable master mode */ | 
|  |  | 
|  | /* init the fifos */ | 
|  | write_reg(hw, HFCUSB_F_THRES, | 
|  | (HFCUSB_TX_THRESHOLD / 8) | ((HFCUSB_RX_THRESHOLD / 8) << 4)); | 
|  |  | 
|  | fifo = hw->fifos; | 
|  | for (i = 0; i < HFCUSB_NUM_FIFOS; i++) { | 
|  | write_reg(hw, HFCUSB_FIFO, i);	/* select the desired fifo */ | 
|  | fifo[i].max_size = | 
|  | (i <= HFCUSB_B2_RX) ? MAX_BCH_SIZE : MAX_DFRAME_LEN; | 
|  | fifo[i].last_urblen = 0; | 
|  |  | 
|  | /* set 2 bit for D- & E-channel */ | 
|  | write_reg(hw, HFCUSB_HDLC_PAR, ((i <= HFCUSB_B2_RX) ? 0 : 2)); | 
|  |  | 
|  | /* enable all fifos */ | 
|  | if (i == HFCUSB_D_TX) | 
|  | write_reg(hw, HFCUSB_CON_HDLC, | 
|  | (hw->protocol == ISDN_P_NT_S0) ? 0x08 : 0x09); | 
|  | else | 
|  | write_reg(hw, HFCUSB_CON_HDLC, 0x08); | 
|  | write_reg(hw, HFCUSB_INC_RES_F, 2); /* reset the fifo */ | 
|  | } | 
|  |  | 
|  | write_reg(hw, HFCUSB_SCTRL_R, 0); /* disable both B receivers */ | 
|  | handle_led(hw, LED_POWER_ON); | 
|  | } | 
|  |  | 
|  | /* start USB data pipes dependand on device's endpoint configuration */ | 
|  | static void | 
|  | hfcsusb_start_endpoint(struct hfcsusb *hw, int channel) | 
|  | { | 
|  | /* quick check if endpoint already running */ | 
|  | if ((channel == HFC_CHAN_D) && (hw->fifos[HFCUSB_D_RX].active)) | 
|  | return; | 
|  | if ((channel == HFC_CHAN_B1) && (hw->fifos[HFCUSB_B1_RX].active)) | 
|  | return; | 
|  | if ((channel == HFC_CHAN_B2) && (hw->fifos[HFCUSB_B2_RX].active)) | 
|  | return; | 
|  | if ((channel == HFC_CHAN_E) && (hw->fifos[HFCUSB_PCM_RX].active)) | 
|  | return; | 
|  |  | 
|  | /* start rx endpoints using USB INT IN method */ | 
|  | if (hw->cfg_used == CNF_3INT3ISO || hw->cfg_used == CNF_4INT3ISO) | 
|  | start_int_fifo(hw->fifos + channel*2 + 1); | 
|  |  | 
|  | /* start rx endpoints using USB ISO IN method */ | 
|  | if (hw->cfg_used == CNF_3ISO3ISO || hw->cfg_used == CNF_4ISO3ISO) { | 
|  | switch (channel) { | 
|  | case HFC_CHAN_D: | 
|  | start_isoc_chain(hw->fifos + HFCUSB_D_RX, | 
|  | ISOC_PACKETS_D, | 
|  | (usb_complete_t)rx_iso_complete, | 
|  | 16); | 
|  | break; | 
|  | case HFC_CHAN_E: | 
|  | start_isoc_chain(hw->fifos + HFCUSB_PCM_RX, | 
|  | ISOC_PACKETS_D, | 
|  | (usb_complete_t)rx_iso_complete, | 
|  | 16); | 
|  | break; | 
|  | case HFC_CHAN_B1: | 
|  | start_isoc_chain(hw->fifos + HFCUSB_B1_RX, | 
|  | ISOC_PACKETS_B, | 
|  | (usb_complete_t)rx_iso_complete, | 
|  | 16); | 
|  | break; | 
|  | case HFC_CHAN_B2: | 
|  | start_isoc_chain(hw->fifos + HFCUSB_B2_RX, | 
|  | ISOC_PACKETS_B, | 
|  | (usb_complete_t)rx_iso_complete, | 
|  | 16); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* start tx endpoints using USB ISO OUT method */ | 
|  | switch (channel) { | 
|  | case HFC_CHAN_D: | 
|  | start_isoc_chain(hw->fifos + HFCUSB_D_TX, | 
|  | ISOC_PACKETS_B, | 
|  | (usb_complete_t)tx_iso_complete, 1); | 
|  | break; | 
|  | case HFC_CHAN_B1: | 
|  | start_isoc_chain(hw->fifos + HFCUSB_B1_TX, | 
|  | ISOC_PACKETS_D, | 
|  | (usb_complete_t)tx_iso_complete, 1); | 
|  | break; | 
|  | case HFC_CHAN_B2: | 
|  | start_isoc_chain(hw->fifos + HFCUSB_B2_TX, | 
|  | ISOC_PACKETS_B, | 
|  | (usb_complete_t)tx_iso_complete, 1); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* stop USB data pipes dependand on device's endpoint configuration */ | 
|  | static void | 
|  | hfcsusb_stop_endpoint(struct hfcsusb *hw, int channel) | 
|  | { | 
|  | /* quick check if endpoint currently running */ | 
|  | if ((channel == HFC_CHAN_D) && (!hw->fifos[HFCUSB_D_RX].active)) | 
|  | return; | 
|  | if ((channel == HFC_CHAN_B1) && (!hw->fifos[HFCUSB_B1_RX].active)) | 
|  | return; | 
|  | if ((channel == HFC_CHAN_B2) && (!hw->fifos[HFCUSB_B2_RX].active)) | 
|  | return; | 
|  | if ((channel == HFC_CHAN_E) && (!hw->fifos[HFCUSB_PCM_RX].active)) | 
|  | return; | 
|  |  | 
|  | /* rx endpoints using USB INT IN method */ | 
|  | if (hw->cfg_used == CNF_3INT3ISO || hw->cfg_used == CNF_4INT3ISO) | 
|  | stop_int_gracefull(hw->fifos + channel*2 + 1); | 
|  |  | 
|  | /* rx endpoints using USB ISO IN method */ | 
|  | if (hw->cfg_used == CNF_3ISO3ISO || hw->cfg_used == CNF_4ISO3ISO) | 
|  | stop_iso_gracefull(hw->fifos + channel*2 + 1); | 
|  |  | 
|  | /* tx endpoints using USB ISO OUT method */ | 
|  | if (channel != HFC_CHAN_E) | 
|  | stop_iso_gracefull(hw->fifos + channel*2); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Hardware Initialization */ | 
|  | static int | 
|  | setup_hfcsusb(struct hfcsusb *hw) | 
|  | { | 
|  | int err; | 
|  | u_char b; | 
|  |  | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); | 
|  |  | 
|  | /* check the chip id */ | 
|  | if (read_reg_atomic(hw, HFCUSB_CHIP_ID, &b) != 1) { | 
|  | printk(KERN_DEBUG "%s: %s: cannot read chip id\n", | 
|  | hw->name, __func__); | 
|  | return 1; | 
|  | } | 
|  | if (b != HFCUSB_CHIPID) { | 
|  | printk(KERN_DEBUG "%s: %s: Invalid chip id 0x%02x\n", | 
|  | hw->name, __func__, b); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* first set the needed config, interface and alternate */ | 
|  | err = usb_set_interface(hw->dev, hw->if_used, hw->alt_used); | 
|  |  | 
|  | hw->led_state = 0; | 
|  |  | 
|  | /* init the background machinery for control requests */ | 
|  | hw->ctrl_read.bRequestType = 0xc0; | 
|  | hw->ctrl_read.bRequest = 1; | 
|  | hw->ctrl_read.wLength = cpu_to_le16(1); | 
|  | hw->ctrl_write.bRequestType = 0x40; | 
|  | hw->ctrl_write.bRequest = 0; | 
|  | hw->ctrl_write.wLength = 0; | 
|  | usb_fill_control_urb(hw->ctrl_urb, hw->dev, hw->ctrl_out_pipe, | 
|  | (u_char *)&hw->ctrl_write, NULL, 0, | 
|  | (usb_complete_t)ctrl_complete, hw); | 
|  |  | 
|  | reset_hfcsusb(hw); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | release_hw(struct hfcsusb *hw) | 
|  | { | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); | 
|  |  | 
|  | /* | 
|  | * stop all endpoints gracefully | 
|  | * TODO: mISDN_core should generate CLOSE_CHANNEL | 
|  | *       signals after calling mISDN_unregister_device() | 
|  | */ | 
|  | hfcsusb_stop_endpoint(hw, HFC_CHAN_D); | 
|  | hfcsusb_stop_endpoint(hw, HFC_CHAN_B1); | 
|  | hfcsusb_stop_endpoint(hw, HFC_CHAN_B2); | 
|  | if (hw->fifos[HFCUSB_PCM_RX].pipe) | 
|  | hfcsusb_stop_endpoint(hw, HFC_CHAN_E); | 
|  | if (hw->protocol == ISDN_P_TE_S0) | 
|  | l1_event(hw->dch.l1, CLOSE_CHANNEL); | 
|  |  | 
|  | mISDN_unregister_device(&hw->dch.dev); | 
|  | mISDN_freebchannel(&hw->bch[1]); | 
|  | mISDN_freebchannel(&hw->bch[0]); | 
|  | mISDN_freedchannel(&hw->dch); | 
|  |  | 
|  | if (hw->ctrl_urb) { | 
|  | usb_kill_urb(hw->ctrl_urb); | 
|  | usb_free_urb(hw->ctrl_urb); | 
|  | hw->ctrl_urb = NULL; | 
|  | } | 
|  |  | 
|  | if (hw->intf) | 
|  | usb_set_intfdata(hw->intf, NULL); | 
|  | list_del(&hw->list); | 
|  | kfree(hw); | 
|  | hw = NULL; | 
|  | } | 
|  |  | 
|  | static void | 
|  | deactivate_bchannel(struct bchannel *bch) | 
|  | { | 
|  | struct hfcsusb *hw = bch->hw; | 
|  | u_long flags; | 
|  |  | 
|  | if (bch->debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: %s: bch->nr(%i)\n", | 
|  | hw->name, __func__, bch->nr); | 
|  |  | 
|  | spin_lock_irqsave(&hw->lock, flags); | 
|  | if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) { | 
|  | dev_kfree_skb(bch->next_skb); | 
|  | bch->next_skb = NULL; | 
|  | } | 
|  | if (bch->tx_skb) { | 
|  | dev_kfree_skb(bch->tx_skb); | 
|  | bch->tx_skb = NULL; | 
|  | } | 
|  | bch->tx_idx = 0; | 
|  | if (bch->rx_skb) { | 
|  | dev_kfree_skb(bch->rx_skb); | 
|  | bch->rx_skb = NULL; | 
|  | } | 
|  | clear_bit(FLG_ACTIVE, &bch->Flags); | 
|  | clear_bit(FLG_TX_BUSY, &bch->Flags); | 
|  | spin_unlock_irqrestore(&hw->lock, flags); | 
|  | hfcsusb_setup_bch(bch, ISDN_P_NONE); | 
|  | hfcsusb_stop_endpoint(hw, bch->nr); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Layer 1 B-channel hardware access | 
|  | */ | 
|  | static int | 
|  | hfc_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg) | 
|  | { | 
|  | struct bchannel	*bch = container_of(ch, struct bchannel, ch); | 
|  | int		ret = -EINVAL; | 
|  |  | 
|  | if (bch->debug & DEBUG_HW) | 
|  | printk(KERN_DEBUG "%s: cmd:%x %p\n", __func__, cmd, arg); | 
|  |  | 
|  | switch (cmd) { | 
|  | case HW_TESTRX_RAW: | 
|  | case HW_TESTRX_HDLC: | 
|  | case HW_TESTRX_OFF: | 
|  | ret = -EINVAL; | 
|  | break; | 
|  |  | 
|  | case CLOSE_CHANNEL: | 
|  | test_and_clear_bit(FLG_OPEN, &bch->Flags); | 
|  | if (test_bit(FLG_ACTIVE, &bch->Flags)) | 
|  | deactivate_bchannel(bch); | 
|  | ch->protocol = ISDN_P_NONE; | 
|  | ch->peer = NULL; | 
|  | module_put(THIS_MODULE); | 
|  | ret = 0; | 
|  | break; | 
|  | case CONTROL_CHANNEL: | 
|  | ret = channel_bctrl(bch, arg); | 
|  | break; | 
|  | default: | 
|  | printk(KERN_WARNING "%s: unknown prim(%x)\n", | 
|  | __func__, cmd); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | setup_instance(struct hfcsusb *hw, struct device *parent) | 
|  | { | 
|  | u_long	flags; | 
|  | int	err, i; | 
|  |  | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); | 
|  |  | 
|  | spin_lock_init(&hw->ctrl_lock); | 
|  | spin_lock_init(&hw->lock); | 
|  |  | 
|  | mISDN_initdchannel(&hw->dch, MAX_DFRAME_LEN_L1, ph_state); | 
|  | hw->dch.debug = debug & 0xFFFF; | 
|  | hw->dch.hw = hw; | 
|  | hw->dch.dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0); | 
|  | hw->dch.dev.D.send = hfcusb_l2l1D; | 
|  | hw->dch.dev.D.ctrl = hfc_dctrl; | 
|  |  | 
|  | /* enable E-Channel logging */ | 
|  | if (hw->fifos[HFCUSB_PCM_RX].pipe) | 
|  | mISDN_initdchannel(&hw->ech, MAX_DFRAME_LEN_L1, NULL); | 
|  |  | 
|  | hw->dch.dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) | | 
|  | (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK)); | 
|  | hw->dch.dev.nrbchan = 2; | 
|  | for (i = 0; i < 2; i++) { | 
|  | hw->bch[i].nr = i + 1; | 
|  | set_channelmap(i + 1, hw->dch.dev.channelmap); | 
|  | hw->bch[i].debug = debug; | 
|  | mISDN_initbchannel(&hw->bch[i], MAX_DATA_MEM); | 
|  | hw->bch[i].hw = hw; | 
|  | hw->bch[i].ch.send = hfcusb_l2l1B; | 
|  | hw->bch[i].ch.ctrl = hfc_bctrl; | 
|  | hw->bch[i].ch.nr = i + 1; | 
|  | list_add(&hw->bch[i].ch.list, &hw->dch.dev.bchannels); | 
|  | } | 
|  |  | 
|  | hw->fifos[HFCUSB_B1_TX].bch = &hw->bch[0]; | 
|  | hw->fifos[HFCUSB_B1_RX].bch = &hw->bch[0]; | 
|  | hw->fifos[HFCUSB_B2_TX].bch = &hw->bch[1]; | 
|  | hw->fifos[HFCUSB_B2_RX].bch = &hw->bch[1]; | 
|  | hw->fifos[HFCUSB_D_TX].dch = &hw->dch; | 
|  | hw->fifos[HFCUSB_D_RX].dch = &hw->dch; | 
|  | hw->fifos[HFCUSB_PCM_RX].ech = &hw->ech; | 
|  | hw->fifos[HFCUSB_PCM_TX].ech = &hw->ech; | 
|  |  | 
|  | err = setup_hfcsusb(hw); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | snprintf(hw->name, MISDN_MAX_IDLEN - 1, "%s.%d", DRIVER_NAME, | 
|  | hfcsusb_cnt + 1); | 
|  | printk(KERN_INFO "%s: registered as '%s'\n", | 
|  | DRIVER_NAME, hw->name); | 
|  |  | 
|  | err = mISDN_register_device(&hw->dch.dev, parent, hw->name); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | hfcsusb_cnt++; | 
|  | write_lock_irqsave(&HFClock, flags); | 
|  | list_add_tail(&hw->list, &HFClist); | 
|  | write_unlock_irqrestore(&HFClock, flags); | 
|  | return 0; | 
|  |  | 
|  | out: | 
|  | mISDN_freebchannel(&hw->bch[1]); | 
|  | mISDN_freebchannel(&hw->bch[0]); | 
|  | mISDN_freedchannel(&hw->dch); | 
|  | kfree(hw); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int | 
|  | hfcsusb_probe(struct usb_interface *intf, const struct usb_device_id *id) | 
|  | { | 
|  | struct hfcsusb			*hw; | 
|  | struct usb_device		*dev = interface_to_usbdev(intf); | 
|  | struct usb_host_interface	*iface = intf->cur_altsetting; | 
|  | struct usb_host_interface	*iface_used = NULL; | 
|  | struct usb_host_endpoint	*ep; | 
|  | struct hfcsusb_vdata		*driver_info; | 
|  | int ifnum = iface->desc.bInterfaceNumber, i, idx, alt_idx, | 
|  | probe_alt_setting, vend_idx, cfg_used, *vcf, attr, cfg_found, | 
|  | ep_addr, cmptbl[16], small_match, iso_packet_size, packet_size, | 
|  | alt_used = 0; | 
|  |  | 
|  | vend_idx = 0xffff; | 
|  | for (i = 0; hfcsusb_idtab[i].idVendor; i++) { | 
|  | if ((le16_to_cpu(dev->descriptor.idVendor) | 
|  | == hfcsusb_idtab[i].idVendor) && | 
|  | (le16_to_cpu(dev->descriptor.idProduct) | 
|  | == hfcsusb_idtab[i].idProduct)) { | 
|  | vend_idx = i; | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | printk(KERN_DEBUG | 
|  | "%s: interface(%d) actalt(%d) minor(%d) vend_idx(%d)\n", | 
|  | __func__, ifnum, iface->desc.bAlternateSetting, | 
|  | intf->minor, vend_idx); | 
|  |  | 
|  | if (vend_idx == 0xffff) { | 
|  | printk(KERN_WARNING | 
|  | "%s: no valid vendor found in USB descriptor\n", | 
|  | __func__); | 
|  | return -EIO; | 
|  | } | 
|  | /* if vendor and product ID is OK, start probing alternate settings */ | 
|  | alt_idx = 0; | 
|  | small_match = -1; | 
|  |  | 
|  | /* default settings */ | 
|  | iso_packet_size = 16; | 
|  | packet_size = 64; | 
|  |  | 
|  | while (alt_idx < intf->num_altsetting) { | 
|  | iface = intf->altsetting + alt_idx; | 
|  | probe_alt_setting = iface->desc.bAlternateSetting; | 
|  | cfg_used = 0; | 
|  |  | 
|  | while (validconf[cfg_used][0]) { | 
|  | cfg_found = 1; | 
|  | vcf = validconf[cfg_used]; | 
|  | ep = iface->endpoint; | 
|  | memcpy(cmptbl, vcf, 16 * sizeof(int)); | 
|  |  | 
|  | /* check for all endpoints in this alternate setting */ | 
|  | for (i = 0; i < iface->desc.bNumEndpoints; i++) { | 
|  | ep_addr = ep->desc.bEndpointAddress; | 
|  |  | 
|  | /* get endpoint base */ | 
|  | idx = ((ep_addr & 0x7f) - 1) * 2; | 
|  | if (ep_addr & 0x80) | 
|  | idx++; | 
|  | attr = ep->desc.bmAttributes; | 
|  |  | 
|  | if (cmptbl[idx] != EP_NOP) { | 
|  | if (cmptbl[idx] == EP_NUL) | 
|  | cfg_found = 0; | 
|  | if (attr == USB_ENDPOINT_XFER_INT | 
|  | && cmptbl[idx] == EP_INT) | 
|  | cmptbl[idx] = EP_NUL; | 
|  | if (attr == USB_ENDPOINT_XFER_BULK | 
|  | && cmptbl[idx] == EP_BLK) | 
|  | cmptbl[idx] = EP_NUL; | 
|  | if (attr == USB_ENDPOINT_XFER_ISOC | 
|  | && cmptbl[idx] == EP_ISO) | 
|  | cmptbl[idx] = EP_NUL; | 
|  |  | 
|  | if (attr == USB_ENDPOINT_XFER_INT && | 
|  | ep->desc.bInterval < vcf[17]) { | 
|  | cfg_found = 0; | 
|  | } | 
|  | } | 
|  | ep++; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 16; i++) | 
|  | if (cmptbl[i] != EP_NOP && cmptbl[i] != EP_NUL) | 
|  | cfg_found = 0; | 
|  |  | 
|  | if (cfg_found) { | 
|  | if (small_match < cfg_used) { | 
|  | small_match = cfg_used; | 
|  | alt_used = probe_alt_setting; | 
|  | iface_used = iface; | 
|  | } | 
|  | } | 
|  | cfg_used++; | 
|  | } | 
|  | alt_idx++; | 
|  | }	/* (alt_idx < intf->num_altsetting) */ | 
|  |  | 
|  | /* not found a valid USB Ta Endpoint config */ | 
|  | if (small_match == -1) | 
|  | return -EIO; | 
|  |  | 
|  | iface = iface_used; | 
|  | hw = kzalloc(sizeof(struct hfcsusb), GFP_KERNEL); | 
|  | if (!hw) | 
|  | return -ENOMEM;	/* got no mem */ | 
|  | snprintf(hw->name, MISDN_MAX_IDLEN - 1, "%s", DRIVER_NAME); | 
|  |  | 
|  | ep = iface->endpoint; | 
|  | vcf = validconf[small_match]; | 
|  |  | 
|  | for (i = 0; i < iface->desc.bNumEndpoints; i++) { | 
|  | struct usb_fifo *f; | 
|  |  | 
|  | ep_addr = ep->desc.bEndpointAddress; | 
|  | /* get endpoint base */ | 
|  | idx = ((ep_addr & 0x7f) - 1) * 2; | 
|  | if (ep_addr & 0x80) | 
|  | idx++; | 
|  | f = &hw->fifos[idx & 7]; | 
|  |  | 
|  | /* init Endpoints */ | 
|  | if (vcf[idx] == EP_NOP || vcf[idx] == EP_NUL) { | 
|  | ep++; | 
|  | continue; | 
|  | } | 
|  | switch (ep->desc.bmAttributes) { | 
|  | case USB_ENDPOINT_XFER_INT: | 
|  | f->pipe = usb_rcvintpipe(dev, | 
|  | ep->desc.bEndpointAddress); | 
|  | f->usb_transfer_mode = USB_INT; | 
|  | packet_size = le16_to_cpu(ep->desc.wMaxPacketSize); | 
|  | break; | 
|  | case USB_ENDPOINT_XFER_BULK: | 
|  | if (ep_addr & 0x80) | 
|  | f->pipe = usb_rcvbulkpipe(dev, | 
|  | ep->desc.bEndpointAddress); | 
|  | else | 
|  | f->pipe = usb_sndbulkpipe(dev, | 
|  | ep->desc.bEndpointAddress); | 
|  | f->usb_transfer_mode = USB_BULK; | 
|  | packet_size = le16_to_cpu(ep->desc.wMaxPacketSize); | 
|  | break; | 
|  | case USB_ENDPOINT_XFER_ISOC: | 
|  | if (ep_addr & 0x80) | 
|  | f->pipe = usb_rcvisocpipe(dev, | 
|  | ep->desc.bEndpointAddress); | 
|  | else | 
|  | f->pipe = usb_sndisocpipe(dev, | 
|  | ep->desc.bEndpointAddress); | 
|  | f->usb_transfer_mode = USB_ISOC; | 
|  | iso_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize); | 
|  | break; | 
|  | default: | 
|  | f->pipe = 0; | 
|  | } | 
|  |  | 
|  | if (f->pipe) { | 
|  | f->fifonum = idx & 7; | 
|  | f->hw = hw; | 
|  | f->usb_packet_maxlen = | 
|  | le16_to_cpu(ep->desc.wMaxPacketSize); | 
|  | f->intervall = ep->desc.bInterval; | 
|  | } | 
|  | ep++; | 
|  | } | 
|  | hw->dev = dev; /* save device */ | 
|  | hw->if_used = ifnum; /* save used interface */ | 
|  | hw->alt_used = alt_used; /* and alternate config */ | 
|  | hw->ctrl_paksize = dev->descriptor.bMaxPacketSize0; /* control size */ | 
|  | hw->cfg_used = vcf[16];	/* store used config */ | 
|  | hw->vend_idx = vend_idx; /* store found vendor */ | 
|  | hw->packet_size = packet_size; | 
|  | hw->iso_packet_size = iso_packet_size; | 
|  |  | 
|  | /* create the control pipes needed for register access */ | 
|  | hw->ctrl_in_pipe = usb_rcvctrlpipe(hw->dev, 0); | 
|  | hw->ctrl_out_pipe = usb_sndctrlpipe(hw->dev, 0); | 
|  | hw->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL); | 
|  |  | 
|  | driver_info = | 
|  | (struct hfcsusb_vdata *)hfcsusb_idtab[vend_idx].driver_info; | 
|  | printk(KERN_DEBUG "%s: %s: detected \"%s\" (%s, if=%d alt=%d)\n", | 
|  | hw->name, __func__, driver_info->vend_name, | 
|  | conf_str[small_match], ifnum, alt_used); | 
|  |  | 
|  | if (setup_instance(hw, dev->dev.parent)) | 
|  | return -EIO; | 
|  |  | 
|  | hw->intf = intf; | 
|  | usb_set_intfdata(hw->intf, hw); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* function called when an active device is removed */ | 
|  | static void | 
|  | hfcsusb_disconnect(struct usb_interface *intf) | 
|  | { | 
|  | struct hfcsusb *hw = usb_get_intfdata(intf); | 
|  | struct hfcsusb *next; | 
|  | int cnt = 0; | 
|  |  | 
|  | printk(KERN_INFO "%s: device disconnected\n", hw->name); | 
|  |  | 
|  | handle_led(hw, LED_POWER_OFF); | 
|  | release_hw(hw); | 
|  |  | 
|  | list_for_each_entry_safe(hw, next, &HFClist, list) | 
|  | cnt++; | 
|  | if (!cnt) | 
|  | hfcsusb_cnt = 0; | 
|  |  | 
|  | usb_set_intfdata(intf, NULL); | 
|  | } | 
|  |  | 
|  | static struct usb_driver hfcsusb_drv = { | 
|  | .name = DRIVER_NAME, | 
|  | .id_table = hfcsusb_idtab, | 
|  | .probe = hfcsusb_probe, | 
|  | .disconnect = hfcsusb_disconnect, | 
|  | }; | 
|  |  | 
|  | static int __init | 
|  | hfcsusb_init(void) | 
|  | { | 
|  | printk(KERN_INFO DRIVER_NAME " driver Rev. %s debug(0x%x) poll(%i)\n", | 
|  | hfcsusb_rev, debug, poll); | 
|  |  | 
|  | if (usb_register(&hfcsusb_drv)) { | 
|  | printk(KERN_INFO DRIVER_NAME | 
|  | ": Unable to register hfcsusb module at usb stack\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit | 
|  | hfcsusb_cleanup(void) | 
|  | { | 
|  | if (debug & DBG_HFC_CALL_TRACE) | 
|  | printk(KERN_INFO DRIVER_NAME ": %s\n", __func__); | 
|  |  | 
|  | /* unregister Hardware */ | 
|  | usb_deregister(&hfcsusb_drv);	/* release our driver */ | 
|  | } | 
|  |  | 
|  | module_init(hfcsusb_init); | 
|  | module_exit(hfcsusb_cleanup); |