|  | /** | 
|  | * This file contains the major functions in WLAN | 
|  | * driver. It includes init, exit, open, close and main | 
|  | * thread etc.. | 
|  | */ | 
|  |  | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/kfifo.h> | 
|  | #include <linux/stddef.h> | 
|  | #include <linux/ieee80211.h> | 
|  | #include <net/iw_handler.h> | 
|  |  | 
|  | #include "host.h" | 
|  | #include "decl.h" | 
|  | #include "dev.h" | 
|  | #include "wext.h" | 
|  | #include "debugfs.h" | 
|  | #include "scan.h" | 
|  | #include "assoc.h" | 
|  | #include "cmd.h" | 
|  |  | 
|  | #define DRIVER_RELEASE_VERSION "323.p0" | 
|  | const char lbs_driver_version[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION | 
|  | #ifdef  DEBUG | 
|  | "-dbg" | 
|  | #endif | 
|  | ""; | 
|  |  | 
|  |  | 
|  | /* Module parameters */ | 
|  | unsigned int lbs_debug; | 
|  | EXPORT_SYMBOL_GPL(lbs_debug); | 
|  | module_param_named(libertas_debug, lbs_debug, int, 0644); | 
|  |  | 
|  |  | 
|  | /* This global structure is used to send the confirm_sleep command as | 
|  | * fast as possible down to the firmware. */ | 
|  | struct cmd_confirm_sleep confirm_sleep; | 
|  |  | 
|  |  | 
|  | #define LBS_TX_PWR_DEFAULT		20	/*100mW */ | 
|  | #define LBS_TX_PWR_US_DEFAULT		20	/*100mW */ | 
|  | #define LBS_TX_PWR_JP_DEFAULT		16	/*50mW */ | 
|  | #define LBS_TX_PWR_FR_DEFAULT		20	/*100mW */ | 
|  | #define LBS_TX_PWR_EMEA_DEFAULT	20	/*100mW */ | 
|  |  | 
|  | /* Format { channel, frequency (MHz), maxtxpower } */ | 
|  | /* band: 'B/G', region: USA FCC/Canada IC */ | 
|  | static struct chan_freq_power channel_freq_power_US_BG[] = { | 
|  | {1, 2412, LBS_TX_PWR_US_DEFAULT}, | 
|  | {2, 2417, LBS_TX_PWR_US_DEFAULT}, | 
|  | {3, 2422, LBS_TX_PWR_US_DEFAULT}, | 
|  | {4, 2427, LBS_TX_PWR_US_DEFAULT}, | 
|  | {5, 2432, LBS_TX_PWR_US_DEFAULT}, | 
|  | {6, 2437, LBS_TX_PWR_US_DEFAULT}, | 
|  | {7, 2442, LBS_TX_PWR_US_DEFAULT}, | 
|  | {8, 2447, LBS_TX_PWR_US_DEFAULT}, | 
|  | {9, 2452, LBS_TX_PWR_US_DEFAULT}, | 
|  | {10, 2457, LBS_TX_PWR_US_DEFAULT}, | 
|  | {11, 2462, LBS_TX_PWR_US_DEFAULT} | 
|  | }; | 
|  |  | 
|  | /* band: 'B/G', region: Europe ETSI */ | 
|  | static struct chan_freq_power channel_freq_power_EU_BG[] = { | 
|  | {1, 2412, LBS_TX_PWR_EMEA_DEFAULT}, | 
|  | {2, 2417, LBS_TX_PWR_EMEA_DEFAULT}, | 
|  | {3, 2422, LBS_TX_PWR_EMEA_DEFAULT}, | 
|  | {4, 2427, LBS_TX_PWR_EMEA_DEFAULT}, | 
|  | {5, 2432, LBS_TX_PWR_EMEA_DEFAULT}, | 
|  | {6, 2437, LBS_TX_PWR_EMEA_DEFAULT}, | 
|  | {7, 2442, LBS_TX_PWR_EMEA_DEFAULT}, | 
|  | {8, 2447, LBS_TX_PWR_EMEA_DEFAULT}, | 
|  | {9, 2452, LBS_TX_PWR_EMEA_DEFAULT}, | 
|  | {10, 2457, LBS_TX_PWR_EMEA_DEFAULT}, | 
|  | {11, 2462, LBS_TX_PWR_EMEA_DEFAULT}, | 
|  | {12, 2467, LBS_TX_PWR_EMEA_DEFAULT}, | 
|  | {13, 2472, LBS_TX_PWR_EMEA_DEFAULT} | 
|  | }; | 
|  |  | 
|  | /* band: 'B/G', region: Spain */ | 
|  | static struct chan_freq_power channel_freq_power_SPN_BG[] = { | 
|  | {10, 2457, LBS_TX_PWR_DEFAULT}, | 
|  | {11, 2462, LBS_TX_PWR_DEFAULT} | 
|  | }; | 
|  |  | 
|  | /* band: 'B/G', region: France */ | 
|  | static struct chan_freq_power channel_freq_power_FR_BG[] = { | 
|  | {10, 2457, LBS_TX_PWR_FR_DEFAULT}, | 
|  | {11, 2462, LBS_TX_PWR_FR_DEFAULT}, | 
|  | {12, 2467, LBS_TX_PWR_FR_DEFAULT}, | 
|  | {13, 2472, LBS_TX_PWR_FR_DEFAULT} | 
|  | }; | 
|  |  | 
|  | /* band: 'B/G', region: Japan */ | 
|  | static struct chan_freq_power channel_freq_power_JPN_BG[] = { | 
|  | {1, 2412, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {2, 2417, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {3, 2422, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {4, 2427, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {5, 2432, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {6, 2437, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {7, 2442, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {8, 2447, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {9, 2452, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {10, 2457, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {11, 2462, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {12, 2467, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {13, 2472, LBS_TX_PWR_JP_DEFAULT}, | 
|  | {14, 2484, LBS_TX_PWR_JP_DEFAULT} | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * the structure for channel, frequency and power | 
|  | */ | 
|  | struct region_cfp_table { | 
|  | u8 region; | 
|  | struct chan_freq_power *cfp_BG; | 
|  | int cfp_no_BG; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * the structure for the mapping between region and CFP | 
|  | */ | 
|  | static struct region_cfp_table region_cfp_table[] = { | 
|  | {0x10,			/*US FCC */ | 
|  | channel_freq_power_US_BG, | 
|  | ARRAY_SIZE(channel_freq_power_US_BG), | 
|  | } | 
|  | , | 
|  | {0x20,			/*CANADA IC */ | 
|  | channel_freq_power_US_BG, | 
|  | ARRAY_SIZE(channel_freq_power_US_BG), | 
|  | } | 
|  | , | 
|  | {0x30, /*EU*/ channel_freq_power_EU_BG, | 
|  | ARRAY_SIZE(channel_freq_power_EU_BG), | 
|  | } | 
|  | , | 
|  | {0x31, /*SPAIN*/ channel_freq_power_SPN_BG, | 
|  | ARRAY_SIZE(channel_freq_power_SPN_BG), | 
|  | } | 
|  | , | 
|  | {0x32, /*FRANCE*/ channel_freq_power_FR_BG, | 
|  | ARRAY_SIZE(channel_freq_power_FR_BG), | 
|  | } | 
|  | , | 
|  | {0x40, /*JAPAN*/ channel_freq_power_JPN_BG, | 
|  | ARRAY_SIZE(channel_freq_power_JPN_BG), | 
|  | } | 
|  | , | 
|  | /*Add new region here */ | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * the table to keep region code | 
|  | */ | 
|  | u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE] = | 
|  | { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 }; | 
|  |  | 
|  | /** | 
|  | * 802.11b/g supported bitrates (in 500Kb/s units) | 
|  | */ | 
|  | u8 lbs_bg_rates[MAX_RATES] = | 
|  | { 0x02, 0x04, 0x0b, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c, | 
|  | 0x00, 0x00 }; | 
|  |  | 
|  | /** | 
|  | * FW rate table.  FW refers to rates by their index in this table, not by the | 
|  | * rate value itself.  Values of 0x00 are | 
|  | * reserved positions. | 
|  | */ | 
|  | static u8 fw_data_rates[MAX_RATES] = | 
|  | { 0x02, 0x04, 0x0B, 0x16, 0x00, 0x0C, 0x12, | 
|  | 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x00 | 
|  | }; | 
|  |  | 
|  | /** | 
|  | *  @brief use index to get the data rate | 
|  | * | 
|  | *  @param idx                The index of data rate | 
|  | *  @return 	   		data rate or 0 | 
|  | */ | 
|  | u32 lbs_fw_index_to_data_rate(u8 idx) | 
|  | { | 
|  | if (idx >= sizeof(fw_data_rates)) | 
|  | idx = 0; | 
|  | return fw_data_rates[idx]; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief use rate to get the index | 
|  | * | 
|  | *  @param rate                 data rate | 
|  | *  @return 	   		index or 0 | 
|  | */ | 
|  | u8 lbs_data_rate_to_fw_index(u32 rate) | 
|  | { | 
|  | u8 i; | 
|  |  | 
|  | if (!rate) | 
|  | return 0; | 
|  |  | 
|  | for (i = 0; i < sizeof(fw_data_rates); i++) { | 
|  | if (rate == fw_data_rates[i]) | 
|  | return i; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Attributes exported through sysfs | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * @brief Get function for sysfs attribute anycast_mask | 
|  | */ | 
|  | static ssize_t lbs_anycast_get(struct device *dev, | 
|  | struct device_attribute *attr, char * buf) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | struct cmd_ds_mesh_access mesh_access; | 
|  | int ret; | 
|  |  | 
|  | memset(&mesh_access, 0, sizeof(mesh_access)); | 
|  |  | 
|  | ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_ANYCAST, &mesh_access); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return snprintf(buf, 12, "0x%X\n", le32_to_cpu(mesh_access.data[0])); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * @brief Set function for sysfs attribute anycast_mask | 
|  | */ | 
|  | static ssize_t lbs_anycast_set(struct device *dev, | 
|  | struct device_attribute *attr, const char * buf, size_t count) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | struct cmd_ds_mesh_access mesh_access; | 
|  | uint32_t datum; | 
|  | int ret; | 
|  |  | 
|  | memset(&mesh_access, 0, sizeof(mesh_access)); | 
|  | sscanf(buf, "%x", &datum); | 
|  | mesh_access.data[0] = cpu_to_le32(datum); | 
|  |  | 
|  | ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_ANYCAST, &mesh_access); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * @brief Get function for sysfs attribute prb_rsp_limit | 
|  | */ | 
|  | static ssize_t lbs_prb_rsp_limit_get(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | struct cmd_ds_mesh_access mesh_access; | 
|  | int ret; | 
|  | u32 retry_limit; | 
|  |  | 
|  | memset(&mesh_access, 0, sizeof(mesh_access)); | 
|  | mesh_access.data[0] = cpu_to_le32(CMD_ACT_GET); | 
|  |  | 
|  | ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT, | 
|  | &mesh_access); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | retry_limit = le32_to_cpu(mesh_access.data[1]); | 
|  | return snprintf(buf, 10, "%d\n", retry_limit); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * @brief Set function for sysfs attribute prb_rsp_limit | 
|  | */ | 
|  | static ssize_t lbs_prb_rsp_limit_set(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | struct cmd_ds_mesh_access mesh_access; | 
|  | int ret; | 
|  | unsigned long retry_limit; | 
|  |  | 
|  | memset(&mesh_access, 0, sizeof(mesh_access)); | 
|  | mesh_access.data[0] = cpu_to_le32(CMD_ACT_SET); | 
|  |  | 
|  | if (!strict_strtoul(buf, 10, &retry_limit)) | 
|  | return -ENOTSUPP; | 
|  | if (retry_limit > 15) | 
|  | return -ENOTSUPP; | 
|  |  | 
|  | mesh_access.data[1] = cpu_to_le32(retry_limit); | 
|  |  | 
|  | ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT, | 
|  | &mesh_access); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | static int lbs_add_rtap(struct lbs_private *priv); | 
|  | static void lbs_remove_rtap(struct lbs_private *priv); | 
|  | static int lbs_add_mesh(struct lbs_private *priv); | 
|  | static void lbs_remove_mesh(struct lbs_private *priv); | 
|  |  | 
|  |  | 
|  | /** | 
|  | * Get function for sysfs attribute rtap | 
|  | */ | 
|  | static ssize_t lbs_rtap_get(struct device *dev, | 
|  | struct device_attribute *attr, char * buf) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | return snprintf(buf, 5, "0x%X\n", priv->monitormode); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  Set function for sysfs attribute rtap | 
|  | */ | 
|  | static ssize_t lbs_rtap_set(struct device *dev, | 
|  | struct device_attribute *attr, const char * buf, size_t count) | 
|  | { | 
|  | int monitor_mode; | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  |  | 
|  | sscanf(buf, "%x", &monitor_mode); | 
|  | if (monitor_mode) { | 
|  | if (priv->monitormode == monitor_mode) | 
|  | return strlen(buf); | 
|  | if (!priv->monitormode) { | 
|  | if (priv->infra_open || priv->mesh_open) | 
|  | return -EBUSY; | 
|  | if (priv->mode == IW_MODE_INFRA) | 
|  | lbs_cmd_80211_deauthenticate(priv, | 
|  | priv->curbssparams.bssid, | 
|  | WLAN_REASON_DEAUTH_LEAVING); | 
|  | else if (priv->mode == IW_MODE_ADHOC) | 
|  | lbs_adhoc_stop(priv); | 
|  | lbs_add_rtap(priv); | 
|  | } | 
|  | priv->monitormode = monitor_mode; | 
|  | } else { | 
|  | if (!priv->monitormode) | 
|  | return strlen(buf); | 
|  | priv->monitormode = 0; | 
|  | lbs_remove_rtap(priv); | 
|  |  | 
|  | if (priv->currenttxskb) { | 
|  | dev_kfree_skb_any(priv->currenttxskb); | 
|  | priv->currenttxskb = NULL; | 
|  | } | 
|  |  | 
|  | /* Wake queues, command thread, etc. */ | 
|  | lbs_host_to_card_done(priv); | 
|  | } | 
|  |  | 
|  | lbs_prepare_and_send_command(priv, | 
|  | CMD_802_11_MONITOR_MODE, CMD_ACT_SET, | 
|  | CMD_OPTION_WAITFORRSP, 0, &priv->monitormode); | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_rtap attribute to be exported per ethX interface | 
|  | * through sysfs (/sys/class/net/ethX/lbs_rtap) | 
|  | */ | 
|  | static DEVICE_ATTR(lbs_rtap, 0644, lbs_rtap_get, lbs_rtap_set ); | 
|  |  | 
|  | /** | 
|  | * Get function for sysfs attribute mesh | 
|  | */ | 
|  | static ssize_t lbs_mesh_get(struct device *dev, | 
|  | struct device_attribute *attr, char * buf) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | return snprintf(buf, 5, "0x%X\n", !!priv->mesh_dev); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  Set function for sysfs attribute mesh | 
|  | */ | 
|  | static ssize_t lbs_mesh_set(struct device *dev, | 
|  | struct device_attribute *attr, const char * buf, size_t count) | 
|  | { | 
|  | struct lbs_private *priv = to_net_dev(dev)->ml_priv; | 
|  | int enable; | 
|  | int ret, action = CMD_ACT_MESH_CONFIG_STOP; | 
|  |  | 
|  | sscanf(buf, "%x", &enable); | 
|  | enable = !!enable; | 
|  | if (enable == !!priv->mesh_dev) | 
|  | return count; | 
|  | if (enable) | 
|  | action = CMD_ACT_MESH_CONFIG_START; | 
|  | ret = lbs_mesh_config(priv, action, priv->curbssparams.channel); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (enable) | 
|  | lbs_add_mesh(priv); | 
|  | else | 
|  | lbs_remove_mesh(priv); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lbs_mesh attribute to be exported per ethX interface | 
|  | * through sysfs (/sys/class/net/ethX/lbs_mesh) | 
|  | */ | 
|  | static DEVICE_ATTR(lbs_mesh, 0644, lbs_mesh_get, lbs_mesh_set); | 
|  |  | 
|  | /** | 
|  | * anycast_mask attribute to be exported per mshX interface | 
|  | * through sysfs (/sys/class/net/mshX/anycast_mask) | 
|  | */ | 
|  | static DEVICE_ATTR(anycast_mask, 0644, lbs_anycast_get, lbs_anycast_set); | 
|  |  | 
|  | /** | 
|  | * prb_rsp_limit attribute to be exported per mshX interface | 
|  | * through sysfs (/sys/class/net/mshX/prb_rsp_limit) | 
|  | */ | 
|  | static DEVICE_ATTR(prb_rsp_limit, 0644, lbs_prb_rsp_limit_get, | 
|  | lbs_prb_rsp_limit_set); | 
|  |  | 
|  | static struct attribute *lbs_mesh_sysfs_entries[] = { | 
|  | &dev_attr_anycast_mask.attr, | 
|  | &dev_attr_prb_rsp_limit.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct attribute_group lbs_mesh_attr_group = { | 
|  | .attrs = lbs_mesh_sysfs_entries, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | *  @brief This function opens the ethX or mshX interface | 
|  | * | 
|  | *  @param dev     A pointer to net_device structure | 
|  | *  @return 	   0 or -EBUSY if monitor mode active | 
|  | */ | 
|  | static int lbs_dev_open(struct net_device *dev) | 
|  | { | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_NET); | 
|  |  | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  |  | 
|  | if (priv->monitormode) { | 
|  | ret = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (dev == priv->mesh_dev) { | 
|  | priv->mesh_open = 1; | 
|  | priv->mesh_connect_status = LBS_CONNECTED; | 
|  | netif_carrier_on(dev); | 
|  | } else { | 
|  | priv->infra_open = 1; | 
|  |  | 
|  | if (priv->connect_status == LBS_CONNECTED) | 
|  | netif_carrier_on(dev); | 
|  | else | 
|  | netif_carrier_off(dev); | 
|  | } | 
|  |  | 
|  | if (!priv->tx_pending_len) | 
|  | netif_wake_queue(dev); | 
|  | out: | 
|  |  | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  | lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function closes the mshX interface | 
|  | * | 
|  | *  @param dev     A pointer to net_device structure | 
|  | *  @return 	   0 | 
|  | */ | 
|  | static int lbs_mesh_stop(struct net_device *dev) | 
|  | { | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MESH); | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  |  | 
|  | priv->mesh_open = 0; | 
|  | priv->mesh_connect_status = LBS_DISCONNECTED; | 
|  |  | 
|  | netif_stop_queue(dev); | 
|  | netif_carrier_off(dev); | 
|  |  | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  |  | 
|  | schedule_work(&priv->mcast_work); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_MESH); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function closes the ethX interface | 
|  | * | 
|  | *  @param dev     A pointer to net_device structure | 
|  | *  @return 	   0 | 
|  | */ | 
|  | static int lbs_eth_stop(struct net_device *dev) | 
|  | { | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_NET); | 
|  |  | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | priv->infra_open = 0; | 
|  | netif_stop_queue(dev); | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  |  | 
|  | schedule_work(&priv->mcast_work); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_NET); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void lbs_tx_timeout(struct net_device *dev) | 
|  | { | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_TX); | 
|  |  | 
|  | lbs_pr_err("tx watch dog timeout\n"); | 
|  |  | 
|  | dev->trans_start = jiffies; | 
|  |  | 
|  | if (priv->currenttxskb) | 
|  | lbs_send_tx_feedback(priv, 0); | 
|  |  | 
|  | /* XX: Shouldn't we also call into the hw-specific driver | 
|  | to kick it somehow? */ | 
|  | lbs_host_to_card_done(priv); | 
|  |  | 
|  | /* More often than not, this actually happens because the | 
|  | firmware has crapped itself -- rather than just a very | 
|  | busy medium. So send a harmless command, and if/when | 
|  | _that_ times out, we'll kick it in the head. */ | 
|  | lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0, | 
|  | 0, 0, NULL); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_TX); | 
|  | } | 
|  |  | 
|  | void lbs_host_to_card_done(struct lbs_private *priv) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_THREAD); | 
|  |  | 
|  | spin_lock_irqsave(&priv->driver_lock, flags); | 
|  |  | 
|  | priv->dnld_sent = DNLD_RES_RECEIVED; | 
|  |  | 
|  | /* Wake main thread if commands are pending */ | 
|  | if (!priv->cur_cmd || priv->tx_pending_len > 0) | 
|  | wake_up_interruptible(&priv->waitq); | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->driver_lock, flags); | 
|  | lbs_deb_leave(LBS_DEB_THREAD); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_host_to_card_done); | 
|  |  | 
|  | static int lbs_set_mac_address(struct net_device *dev, void *addr) | 
|  | { | 
|  | int ret = 0; | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  | struct sockaddr *phwaddr = addr; | 
|  | struct cmd_ds_802_11_mac_address cmd; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_NET); | 
|  |  | 
|  | /* In case it was called from the mesh device */ | 
|  | dev = priv->dev; | 
|  |  | 
|  | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | 
|  | cmd.action = cpu_to_le16(CMD_ACT_SET); | 
|  | memcpy(cmd.macadd, phwaddr->sa_data, ETH_ALEN); | 
|  |  | 
|  | ret = lbs_cmd_with_response(priv, CMD_802_11_MAC_ADDRESS, &cmd); | 
|  | if (ret) { | 
|  | lbs_deb_net("set MAC address failed\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | memcpy(priv->current_addr, phwaddr->sa_data, ETH_ALEN); | 
|  | memcpy(dev->dev_addr, phwaddr->sa_data, ETH_ALEN); | 
|  | if (priv->mesh_dev) | 
|  | memcpy(priv->mesh_dev->dev_addr, phwaddr->sa_data, ETH_ALEN); | 
|  |  | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline int mac_in_list(unsigned char *list, int list_len, | 
|  | unsigned char *mac) | 
|  | { | 
|  | while (list_len) { | 
|  | if (!memcmp(list, mac, ETH_ALEN)) | 
|  | return 1; | 
|  | list += ETH_ALEN; | 
|  | list_len--; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int lbs_add_mcast_addrs(struct cmd_ds_mac_multicast_adr *cmd, | 
|  | struct net_device *dev, int nr_addrs) | 
|  | { | 
|  | int i = nr_addrs; | 
|  | struct dev_mc_list *mc_list; | 
|  |  | 
|  | if ((dev->flags & (IFF_UP|IFF_MULTICAST)) != (IFF_UP|IFF_MULTICAST)) | 
|  | return nr_addrs; | 
|  |  | 
|  | netif_addr_lock_bh(dev); | 
|  | for (mc_list = dev->mc_list; mc_list; mc_list = mc_list->next) { | 
|  | if (mac_in_list(cmd->maclist, nr_addrs, mc_list->dmi_addr)) { | 
|  | lbs_deb_net("mcast address %s:%pM skipped\n", dev->name, | 
|  | mc_list->dmi_addr); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (i == MRVDRV_MAX_MULTICAST_LIST_SIZE) | 
|  | break; | 
|  | memcpy(&cmd->maclist[6*i], mc_list->dmi_addr, ETH_ALEN); | 
|  | lbs_deb_net("mcast address %s:%pM added to filter\n", dev->name, | 
|  | mc_list->dmi_addr); | 
|  | i++; | 
|  | } | 
|  | netif_addr_unlock_bh(dev); | 
|  | if (mc_list) | 
|  | return -EOVERFLOW; | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static void lbs_set_mcast_worker(struct work_struct *work) | 
|  | { | 
|  | struct lbs_private *priv = container_of(work, struct lbs_private, mcast_work); | 
|  | struct cmd_ds_mac_multicast_adr mcast_cmd; | 
|  | int dev_flags; | 
|  | int nr_addrs; | 
|  | int old_mac_control = priv->mac_control; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_NET); | 
|  |  | 
|  | dev_flags = priv->dev->flags; | 
|  | if (priv->mesh_dev) | 
|  | dev_flags |= priv->mesh_dev->flags; | 
|  |  | 
|  | if (dev_flags & IFF_PROMISC) { | 
|  | priv->mac_control |= CMD_ACT_MAC_PROMISCUOUS_ENABLE; | 
|  | priv->mac_control &= ~(CMD_ACT_MAC_ALL_MULTICAST_ENABLE | | 
|  | CMD_ACT_MAC_MULTICAST_ENABLE); | 
|  | goto out_set_mac_control; | 
|  | } else if (dev_flags & IFF_ALLMULTI) { | 
|  | do_allmulti: | 
|  | priv->mac_control |= CMD_ACT_MAC_ALL_MULTICAST_ENABLE; | 
|  | priv->mac_control &= ~(CMD_ACT_MAC_PROMISCUOUS_ENABLE | | 
|  | CMD_ACT_MAC_MULTICAST_ENABLE); | 
|  | goto out_set_mac_control; | 
|  | } | 
|  |  | 
|  | /* Once for priv->dev, again for priv->mesh_dev if it exists */ | 
|  | nr_addrs = lbs_add_mcast_addrs(&mcast_cmd, priv->dev, 0); | 
|  | if (nr_addrs >= 0 && priv->mesh_dev) | 
|  | nr_addrs = lbs_add_mcast_addrs(&mcast_cmd, priv->mesh_dev, nr_addrs); | 
|  | if (nr_addrs < 0) | 
|  | goto do_allmulti; | 
|  |  | 
|  | if (nr_addrs) { | 
|  | int size = offsetof(struct cmd_ds_mac_multicast_adr, | 
|  | maclist[6*nr_addrs]); | 
|  |  | 
|  | mcast_cmd.action = cpu_to_le16(CMD_ACT_SET); | 
|  | mcast_cmd.hdr.size = cpu_to_le16(size); | 
|  | mcast_cmd.nr_of_adrs = cpu_to_le16(nr_addrs); | 
|  |  | 
|  | lbs_cmd_async(priv, CMD_MAC_MULTICAST_ADR, &mcast_cmd.hdr, size); | 
|  |  | 
|  | priv->mac_control |= CMD_ACT_MAC_MULTICAST_ENABLE; | 
|  | } else | 
|  | priv->mac_control &= ~CMD_ACT_MAC_MULTICAST_ENABLE; | 
|  |  | 
|  | priv->mac_control &= ~(CMD_ACT_MAC_PROMISCUOUS_ENABLE | | 
|  | CMD_ACT_MAC_ALL_MULTICAST_ENABLE); | 
|  | out_set_mac_control: | 
|  | if (priv->mac_control != old_mac_control) | 
|  | lbs_set_mac_control(priv); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_NET); | 
|  | } | 
|  |  | 
|  | static void lbs_set_multicast_list(struct net_device *dev) | 
|  | { | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  |  | 
|  | schedule_work(&priv->mcast_work); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function handles the major jobs in the LBS driver. | 
|  | *  It handles all events generated by firmware, RX data received | 
|  | *  from firmware and TX data sent from kernel. | 
|  | * | 
|  | *  @param data    A pointer to lbs_thread structure | 
|  | *  @return 	   0 | 
|  | */ | 
|  | static int lbs_thread(void *data) | 
|  | { | 
|  | struct net_device *dev = data; | 
|  | struct lbs_private *priv = dev->ml_priv; | 
|  | wait_queue_t wait; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_THREAD); | 
|  |  | 
|  | init_waitqueue_entry(&wait, current); | 
|  |  | 
|  | for (;;) { | 
|  | int shouldsleep; | 
|  | u8 resp_idx; | 
|  |  | 
|  | lbs_deb_thread("1: currenttxskb %p, dnld_sent %d\n", | 
|  | priv->currenttxskb, priv->dnld_sent); | 
|  |  | 
|  | add_wait_queue(&priv->waitq, &wait); | 
|  | set_current_state(TASK_INTERRUPTIBLE); | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  |  | 
|  | if (kthread_should_stop()) | 
|  | shouldsleep = 0;	/* Bye */ | 
|  | else if (priv->surpriseremoved) | 
|  | shouldsleep = 1;	/* We need to wait until we're _told_ to die */ | 
|  | else if (priv->psstate == PS_STATE_SLEEP) | 
|  | shouldsleep = 1;	/* Sleep mode. Nothing we can do till it wakes */ | 
|  | else if (priv->cmd_timed_out) | 
|  | shouldsleep = 0;	/* Command timed out. Recover */ | 
|  | else if (!priv->fw_ready) | 
|  | shouldsleep = 1;	/* Firmware not ready. We're waiting for it */ | 
|  | else if (priv->dnld_sent) | 
|  | shouldsleep = 1;	/* Something is en route to the device already */ | 
|  | else if (priv->tx_pending_len > 0) | 
|  | shouldsleep = 0;	/* We've a packet to send */ | 
|  | else if (priv->resp_len[priv->resp_idx]) | 
|  | shouldsleep = 0;	/* We have a command response */ | 
|  | else if (priv->cur_cmd) | 
|  | shouldsleep = 1;	/* Can't send a command; one already running */ | 
|  | else if (!list_empty(&priv->cmdpendingq)) | 
|  | shouldsleep = 0;	/* We have a command to send */ | 
|  | else if (__kfifo_len(priv->event_fifo)) | 
|  | shouldsleep = 0;	/* We have an event to process */ | 
|  | else | 
|  | shouldsleep = 1;	/* No command */ | 
|  |  | 
|  | if (shouldsleep) { | 
|  | lbs_deb_thread("sleeping, connect_status %d, " | 
|  | "psmode %d, psstate %d\n", | 
|  | priv->connect_status, | 
|  | priv->psmode, priv->psstate); | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  | schedule(); | 
|  | } else | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  |  | 
|  | lbs_deb_thread("2: currenttxskb %p, dnld_send %d\n", | 
|  | priv->currenttxskb, priv->dnld_sent); | 
|  |  | 
|  | set_current_state(TASK_RUNNING); | 
|  | remove_wait_queue(&priv->waitq, &wait); | 
|  |  | 
|  | lbs_deb_thread("3: currenttxskb %p, dnld_sent %d\n", | 
|  | priv->currenttxskb, priv->dnld_sent); | 
|  |  | 
|  | if (kthread_should_stop()) { | 
|  | lbs_deb_thread("break from main thread\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (priv->surpriseremoved) { | 
|  | lbs_deb_thread("adapter removed; waiting to die...\n"); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n", | 
|  | priv->currenttxskb, priv->dnld_sent); | 
|  |  | 
|  | /* Process any pending command response */ | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | resp_idx = priv->resp_idx; | 
|  | if (priv->resp_len[resp_idx]) { | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  | lbs_process_command_response(priv, | 
|  | priv->resp_buf[resp_idx], | 
|  | priv->resp_len[resp_idx]); | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | priv->resp_len[resp_idx] = 0; | 
|  | } | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  |  | 
|  | /* command timeout stuff */ | 
|  | if (priv->cmd_timed_out && priv->cur_cmd) { | 
|  | struct cmd_ctrl_node *cmdnode = priv->cur_cmd; | 
|  |  | 
|  | if (++priv->nr_retries > 3) { | 
|  | lbs_pr_info("Excessive timeouts submitting " | 
|  | "command 0x%04x\n", | 
|  | le16_to_cpu(cmdnode->cmdbuf->command)); | 
|  | lbs_complete_command(priv, cmdnode, -ETIMEDOUT); | 
|  | priv->nr_retries = 0; | 
|  | if (priv->reset_card) | 
|  | priv->reset_card(priv); | 
|  | } else { | 
|  | priv->cur_cmd = NULL; | 
|  | priv->dnld_sent = DNLD_RES_RECEIVED; | 
|  | lbs_pr_info("requeueing command 0x%04x due " | 
|  | "to timeout (#%d)\n", | 
|  | le16_to_cpu(cmdnode->cmdbuf->command), | 
|  | priv->nr_retries); | 
|  |  | 
|  | /* Stick it back at the _top_ of the pending queue | 
|  | for immediate resubmission */ | 
|  | list_add(&cmdnode->list, &priv->cmdpendingq); | 
|  | } | 
|  | } | 
|  | priv->cmd_timed_out = 0; | 
|  |  | 
|  | /* Process hardware events, e.g. card removed, link lost */ | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | while (__kfifo_len(priv->event_fifo)) { | 
|  | u32 event; | 
|  |  | 
|  | __kfifo_get(priv->event_fifo, (unsigned char *) &event, | 
|  | sizeof(event)); | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  | lbs_process_event(priv, event); | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | } | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  |  | 
|  | if (!priv->fw_ready) | 
|  | continue; | 
|  |  | 
|  | /* Check if we need to confirm Sleep Request received previously */ | 
|  | if (priv->psstate == PS_STATE_PRE_SLEEP && | 
|  | !priv->dnld_sent && !priv->cur_cmd) { | 
|  | if (priv->connect_status == LBS_CONNECTED) { | 
|  | lbs_deb_thread("pre-sleep, currenttxskb %p, " | 
|  | "dnld_sent %d, cur_cmd %p\n", | 
|  | priv->currenttxskb, priv->dnld_sent, | 
|  | priv->cur_cmd); | 
|  |  | 
|  | lbs_ps_confirm_sleep(priv); | 
|  | } else { | 
|  | /* workaround for firmware sending | 
|  | * deauth/linkloss event immediately | 
|  | * after sleep request; remove this | 
|  | * after firmware fixes it | 
|  | */ | 
|  | priv->psstate = PS_STATE_AWAKE; | 
|  | lbs_pr_alert("ignore PS_SleepConfirm in " | 
|  | "non-connected state\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* The PS state is changed during processing of Sleep Request | 
|  | * event above | 
|  | */ | 
|  | if ((priv->psstate == PS_STATE_SLEEP) || | 
|  | (priv->psstate == PS_STATE_PRE_SLEEP)) | 
|  | continue; | 
|  |  | 
|  | /* Execute the next command */ | 
|  | if (!priv->dnld_sent && !priv->cur_cmd) | 
|  | lbs_execute_next_command(priv); | 
|  |  | 
|  | /* Wake-up command waiters which can't sleep in | 
|  | * lbs_prepare_and_send_command | 
|  | */ | 
|  | if (!list_empty(&priv->cmdpendingq)) | 
|  | wake_up_all(&priv->cmd_pending); | 
|  |  | 
|  | spin_lock_irq(&priv->driver_lock); | 
|  | if (!priv->dnld_sent && priv->tx_pending_len > 0) { | 
|  | int ret = priv->hw_host_to_card(priv, MVMS_DAT, | 
|  | priv->tx_pending_buf, | 
|  | priv->tx_pending_len); | 
|  | if (ret) { | 
|  | lbs_deb_tx("host_to_card failed %d\n", ret); | 
|  | priv->dnld_sent = DNLD_RES_RECEIVED; | 
|  | } | 
|  | priv->tx_pending_len = 0; | 
|  | if (!priv->currenttxskb) { | 
|  | /* We can wake the queues immediately if we aren't | 
|  | waiting for TX feedback */ | 
|  | if (priv->connect_status == LBS_CONNECTED) | 
|  | netif_wake_queue(priv->dev); | 
|  | if (priv->mesh_dev && | 
|  | priv->mesh_connect_status == LBS_CONNECTED) | 
|  | netif_wake_queue(priv->mesh_dev); | 
|  | } | 
|  | } | 
|  | spin_unlock_irq(&priv->driver_lock); | 
|  | } | 
|  |  | 
|  | del_timer(&priv->command_timer); | 
|  | wake_up_all(&priv->cmd_pending); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_THREAD); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lbs_suspend_callback(struct lbs_private *priv, unsigned long dummy, | 
|  | struct cmd_header *cmd) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_FW); | 
|  |  | 
|  | netif_device_detach(priv->dev); | 
|  | if (priv->mesh_dev) | 
|  | netif_device_detach(priv->mesh_dev); | 
|  |  | 
|  | priv->fw_ready = 0; | 
|  | lbs_deb_leave(LBS_DEB_FW); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int lbs_suspend(struct lbs_private *priv) | 
|  | { | 
|  | struct cmd_header cmd; | 
|  | int ret; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_FW); | 
|  |  | 
|  | if (priv->wol_criteria == 0xffffffff) { | 
|  | lbs_pr_info("Suspend attempt without configuring wake params!\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  |  | 
|  | ret = __lbs_cmd(priv, CMD_802_11_HOST_SLEEP_ACTIVATE, &cmd, | 
|  | sizeof(cmd), lbs_suspend_callback, 0); | 
|  | if (ret) | 
|  | lbs_pr_info("HOST_SLEEP_ACTIVATE failed: %d\n", ret); | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_suspend); | 
|  |  | 
|  | void lbs_resume(struct lbs_private *priv) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_FW); | 
|  |  | 
|  | priv->fw_ready = 1; | 
|  |  | 
|  | /* Firmware doesn't seem to give us RX packets any more | 
|  | until we send it some command. Might as well update */ | 
|  | lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0, | 
|  | 0, 0, NULL); | 
|  |  | 
|  | netif_device_attach(priv->dev); | 
|  | if (priv->mesh_dev) | 
|  | netif_device_attach(priv->mesh_dev); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_FW); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_resume); | 
|  |  | 
|  | /** | 
|  | * @brief This function gets the HW spec from the firmware and sets | 
|  | *        some basic parameters. | 
|  | * | 
|  | *  @param priv    A pointer to struct lbs_private structure | 
|  | *  @return 	   0 or -1 | 
|  | */ | 
|  | static int lbs_setup_firmware(struct lbs_private *priv) | 
|  | { | 
|  | int ret = -1; | 
|  | s16 curlevel = 0, minlevel = 0, maxlevel = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_FW); | 
|  |  | 
|  | /* Read MAC address from firmware */ | 
|  | memset(priv->current_addr, 0xff, ETH_ALEN); | 
|  | ret = lbs_update_hw_spec(priv); | 
|  | if (ret) | 
|  | goto done; | 
|  |  | 
|  | /* Read power levels if available */ | 
|  | ret = lbs_get_tx_power(priv, &curlevel, &minlevel, &maxlevel); | 
|  | if (ret == 0) { | 
|  | priv->txpower_cur = curlevel; | 
|  | priv->txpower_min = minlevel; | 
|  | priv->txpower_max = maxlevel; | 
|  | } | 
|  |  | 
|  | lbs_set_mac_control(priv); | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  This function handles the timeout of command sending. | 
|  | *  It will re-send the same command again. | 
|  | */ | 
|  | static void command_timer_fn(unsigned long data) | 
|  | { | 
|  | struct lbs_private *priv = (struct lbs_private *)data; | 
|  | unsigned long flags; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_CMD); | 
|  | spin_lock_irqsave(&priv->driver_lock, flags); | 
|  |  | 
|  | if (!priv->cur_cmd) | 
|  | goto out; | 
|  |  | 
|  | lbs_pr_info("command 0x%04x timed out\n", | 
|  | le16_to_cpu(priv->cur_cmd->cmdbuf->command)); | 
|  |  | 
|  | priv->cmd_timed_out = 1; | 
|  | wake_up_interruptible(&priv->waitq); | 
|  | out: | 
|  | spin_unlock_irqrestore(&priv->driver_lock, flags); | 
|  | lbs_deb_leave(LBS_DEB_CMD); | 
|  | } | 
|  |  | 
|  | static void lbs_sync_channel_worker(struct work_struct *work) | 
|  | { | 
|  | struct lbs_private *priv = container_of(work, struct lbs_private, | 
|  | sync_channel); | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  | if (lbs_update_channel(priv)) | 
|  | lbs_pr_info("Channel synchronization failed."); | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int lbs_init_adapter(struct lbs_private *priv) | 
|  | { | 
|  | size_t bufsize; | 
|  | int i, ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | /* Allocate buffer to store the BSSID list */ | 
|  | bufsize = MAX_NETWORK_COUNT * sizeof(struct bss_descriptor); | 
|  | priv->networks = kzalloc(bufsize, GFP_KERNEL); | 
|  | if (!priv->networks) { | 
|  | lbs_pr_err("Out of memory allocating beacons\n"); | 
|  | ret = -1; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Initialize scan result lists */ | 
|  | INIT_LIST_HEAD(&priv->network_free_list); | 
|  | INIT_LIST_HEAD(&priv->network_list); | 
|  | for (i = 0; i < MAX_NETWORK_COUNT; i++) { | 
|  | list_add_tail(&priv->networks[i].list, | 
|  | &priv->network_free_list); | 
|  | } | 
|  |  | 
|  | memset(priv->current_addr, 0xff, ETH_ALEN); | 
|  |  | 
|  | priv->connect_status = LBS_DISCONNECTED; | 
|  | priv->mesh_connect_status = LBS_DISCONNECTED; | 
|  | priv->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM; | 
|  | priv->mode = IW_MODE_INFRA; | 
|  | priv->curbssparams.channel = DEFAULT_AD_HOC_CHANNEL; | 
|  | priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON; | 
|  | priv->radio_on = 1; | 
|  | priv->enablehwauto = 1; | 
|  | priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE; | 
|  | priv->psmode = LBS802_11POWERMODECAM; | 
|  | priv->psstate = PS_STATE_FULL_POWER; | 
|  |  | 
|  | mutex_init(&priv->lock); | 
|  |  | 
|  | setup_timer(&priv->command_timer, command_timer_fn, | 
|  | (unsigned long)priv); | 
|  |  | 
|  | INIT_LIST_HEAD(&priv->cmdfreeq); | 
|  | INIT_LIST_HEAD(&priv->cmdpendingq); | 
|  |  | 
|  | spin_lock_init(&priv->driver_lock); | 
|  | init_waitqueue_head(&priv->cmd_pending); | 
|  |  | 
|  | /* Allocate the command buffers */ | 
|  | if (lbs_allocate_cmd_buffer(priv)) { | 
|  | lbs_pr_err("Out of memory allocating command buffers\n"); | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  | priv->resp_idx = 0; | 
|  | priv->resp_len[0] = priv->resp_len[1] = 0; | 
|  |  | 
|  | /* Create the event FIFO */ | 
|  | priv->event_fifo = kfifo_alloc(sizeof(u32) * 16, GFP_KERNEL, NULL); | 
|  | if (IS_ERR(priv->event_fifo)) { | 
|  | lbs_pr_err("Out of memory allocating event FIFO buffer\n"); | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void lbs_free_adapter(struct lbs_private *priv) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | lbs_free_cmd_buffer(priv); | 
|  | if (priv->event_fifo) | 
|  | kfifo_free(priv->event_fifo); | 
|  | del_timer(&priv->command_timer); | 
|  | kfree(priv->networks); | 
|  | priv->networks = NULL; | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops lbs_netdev_ops = { | 
|  | .ndo_open 		= lbs_dev_open, | 
|  | .ndo_stop		= lbs_eth_stop, | 
|  | .ndo_start_xmit		= lbs_hard_start_xmit, | 
|  | .ndo_set_mac_address	= lbs_set_mac_address, | 
|  | .ndo_tx_timeout 	= lbs_tx_timeout, | 
|  | .ndo_set_multicast_list = lbs_set_multicast_list, | 
|  | .ndo_change_mtu		= eth_change_mtu, | 
|  | .ndo_validate_addr	= eth_validate_addr, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * @brief This function adds the card. it will probe the | 
|  | * card, allocate the lbs_priv and initialize the device. | 
|  | * | 
|  | *  @param card    A pointer to card | 
|  | *  @return 	   A pointer to struct lbs_private structure | 
|  | */ | 
|  | struct lbs_private *lbs_add_card(void *card, struct device *dmdev) | 
|  | { | 
|  | struct net_device *dev = NULL; | 
|  | struct lbs_private *priv = NULL; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | /* Allocate an Ethernet device and register it */ | 
|  | dev = alloc_etherdev(sizeof(struct lbs_private)); | 
|  | if (!dev) { | 
|  | lbs_pr_err("init ethX device failed\n"); | 
|  | goto done; | 
|  | } | 
|  | priv = netdev_priv(dev); | 
|  | dev->ml_priv = priv; | 
|  |  | 
|  | if (lbs_init_adapter(priv)) { | 
|  | lbs_pr_err("failed to initialize adapter structure.\n"); | 
|  | goto err_init_adapter; | 
|  | } | 
|  |  | 
|  | priv->dev = dev; | 
|  | priv->card = card; | 
|  | priv->mesh_open = 0; | 
|  | priv->infra_open = 0; | 
|  |  | 
|  | /* Setup the OS Interface to our functions */ | 
|  | dev->netdev_ops = &lbs_netdev_ops; | 
|  | dev->watchdog_timeo = 5 * HZ; | 
|  | dev->ethtool_ops = &lbs_ethtool_ops; | 
|  | #ifdef	WIRELESS_EXT | 
|  | dev->wireless_handlers = &lbs_handler_def; | 
|  | #endif | 
|  | dev->flags |= IFF_BROADCAST | IFF_MULTICAST; | 
|  |  | 
|  | SET_NETDEV_DEV(dev, dmdev); | 
|  |  | 
|  | priv->rtap_net_dev = NULL; | 
|  |  | 
|  | lbs_deb_thread("Starting main thread...\n"); | 
|  | init_waitqueue_head(&priv->waitq); | 
|  | priv->main_thread = kthread_run(lbs_thread, dev, "lbs_main"); | 
|  | if (IS_ERR(priv->main_thread)) { | 
|  | lbs_deb_thread("Error creating main thread.\n"); | 
|  | goto err_init_adapter; | 
|  | } | 
|  |  | 
|  | priv->work_thread = create_singlethread_workqueue("lbs_worker"); | 
|  | INIT_DELAYED_WORK(&priv->assoc_work, lbs_association_worker); | 
|  | INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker); | 
|  | INIT_WORK(&priv->mcast_work, lbs_set_mcast_worker); | 
|  | INIT_WORK(&priv->sync_channel, lbs_sync_channel_worker); | 
|  |  | 
|  | sprintf(priv->mesh_ssid, "mesh"); | 
|  | priv->mesh_ssid_len = 4; | 
|  |  | 
|  | priv->wol_criteria = 0xffffffff; | 
|  | priv->wol_gpio = 0xff; | 
|  |  | 
|  | goto done; | 
|  |  | 
|  | err_init_adapter: | 
|  | lbs_free_adapter(priv); | 
|  | free_netdev(dev); | 
|  | priv = NULL; | 
|  |  | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_MAIN, "priv %p", priv); | 
|  | return priv; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_add_card); | 
|  |  | 
|  |  | 
|  | void lbs_remove_card(struct lbs_private *priv) | 
|  | { | 
|  | struct net_device *dev = priv->dev; | 
|  | union iwreq_data wrqu; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | lbs_remove_mesh(priv); | 
|  | lbs_remove_rtap(priv); | 
|  |  | 
|  | dev = priv->dev; | 
|  |  | 
|  | cancel_delayed_work_sync(&priv->scan_work); | 
|  | cancel_delayed_work_sync(&priv->assoc_work); | 
|  | cancel_work_sync(&priv->mcast_work); | 
|  |  | 
|  | /* worker thread destruction blocks on the in-flight command which | 
|  | * should have been cleared already in lbs_stop_card(). | 
|  | */ | 
|  | lbs_deb_main("destroying worker thread\n"); | 
|  | destroy_workqueue(priv->work_thread); | 
|  | lbs_deb_main("done destroying worker thread\n"); | 
|  |  | 
|  | if (priv->psmode == LBS802_11POWERMODEMAX_PSP) { | 
|  | priv->psmode = LBS802_11POWERMODECAM; | 
|  | lbs_ps_wakeup(priv, CMD_OPTION_WAITFORRSP); | 
|  | } | 
|  |  | 
|  | memset(wrqu.ap_addr.sa_data, 0xaa, ETH_ALEN); | 
|  | wrqu.ap_addr.sa_family = ARPHRD_ETHER; | 
|  | wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); | 
|  |  | 
|  | /* Stop the thread servicing the interrupts */ | 
|  | priv->surpriseremoved = 1; | 
|  | kthread_stop(priv->main_thread); | 
|  |  | 
|  | lbs_free_adapter(priv); | 
|  |  | 
|  | priv->dev = NULL; | 
|  | free_netdev(dev); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_remove_card); | 
|  |  | 
|  |  | 
|  | int lbs_start_card(struct lbs_private *priv) | 
|  | { | 
|  | struct net_device *dev = priv->dev; | 
|  | int ret = -1; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | /* poke the firmware */ | 
|  | ret = lbs_setup_firmware(priv); | 
|  | if (ret) | 
|  | goto done; | 
|  |  | 
|  | /* init 802.11d */ | 
|  | lbs_init_11d(priv); | 
|  |  | 
|  | if (register_netdev(dev)) { | 
|  | lbs_pr_err("cannot register ethX device\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | lbs_update_channel(priv); | 
|  |  | 
|  | /* 5.0.16p0 is known to NOT support any mesh */ | 
|  | if (priv->fwrelease > 0x05001000) { | 
|  | /* Enable mesh, if supported, and work out which TLV it uses. | 
|  | 0x100 + 291 is an unofficial value used in 5.110.20.pXX | 
|  | 0x100 + 37 is the official value used in 5.110.21.pXX | 
|  | but we check them in that order because 20.pXX doesn't | 
|  | give an error -- it just silently fails. */ | 
|  |  | 
|  | /* 5.110.20.pXX firmware will fail the command if the channel | 
|  | doesn't match the existing channel. But only if the TLV | 
|  | is correct. If the channel is wrong, _BOTH_ versions will | 
|  | give an error to 0x100+291, and allow 0x100+37 to succeed. | 
|  | It's just that 5.110.20.pXX will not have done anything | 
|  | useful */ | 
|  |  | 
|  | priv->mesh_tlv = 0x100 + 291; | 
|  | if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, | 
|  | priv->curbssparams.channel)) { | 
|  | priv->mesh_tlv = 0x100 + 37; | 
|  | if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, | 
|  | priv->curbssparams.channel)) | 
|  | priv->mesh_tlv = 0; | 
|  | } | 
|  | if (priv->mesh_tlv) { | 
|  | lbs_add_mesh(priv); | 
|  |  | 
|  | if (device_create_file(&dev->dev, &dev_attr_lbs_mesh)) | 
|  | lbs_pr_err("cannot register lbs_mesh attribute\n"); | 
|  |  | 
|  | /* While rtap isn't related to mesh, only mesh-enabled | 
|  | * firmware implements the rtap functionality via | 
|  | * CMD_802_11_MONITOR_MODE. | 
|  | */ | 
|  | if (device_create_file(&dev->dev, &dev_attr_lbs_rtap)) | 
|  | lbs_pr_err("cannot register lbs_rtap attribute\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | lbs_debugfs_init_one(priv, dev); | 
|  |  | 
|  | lbs_pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name); | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_start_card); | 
|  |  | 
|  |  | 
|  | void lbs_stop_card(struct lbs_private *priv) | 
|  | { | 
|  | struct net_device *dev; | 
|  | struct cmd_ctrl_node *cmdnode; | 
|  | unsigned long flags; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | if (!priv) | 
|  | goto out; | 
|  | dev = priv->dev; | 
|  |  | 
|  | netif_stop_queue(dev); | 
|  | netif_carrier_off(dev); | 
|  |  | 
|  | lbs_debugfs_remove_one(priv); | 
|  | if (priv->mesh_tlv) { | 
|  | device_remove_file(&dev->dev, &dev_attr_lbs_mesh); | 
|  | device_remove_file(&dev->dev, &dev_attr_lbs_rtap); | 
|  | } | 
|  |  | 
|  | /* Delete the timeout of the currently processing command */ | 
|  | del_timer_sync(&priv->command_timer); | 
|  |  | 
|  | /* Flush pending command nodes */ | 
|  | spin_lock_irqsave(&priv->driver_lock, flags); | 
|  | lbs_deb_main("clearing pending commands\n"); | 
|  | list_for_each_entry(cmdnode, &priv->cmdpendingq, list) { | 
|  | cmdnode->result = -ENOENT; | 
|  | cmdnode->cmdwaitqwoken = 1; | 
|  | wake_up_interruptible(&cmdnode->cmdwait_q); | 
|  | } | 
|  |  | 
|  | /* Flush the command the card is currently processing */ | 
|  | if (priv->cur_cmd) { | 
|  | lbs_deb_main("clearing current command\n"); | 
|  | priv->cur_cmd->result = -ENOENT; | 
|  | priv->cur_cmd->cmdwaitqwoken = 1; | 
|  | wake_up_interruptible(&priv->cur_cmd->cmdwait_q); | 
|  | } | 
|  | lbs_deb_main("done clearing commands\n"); | 
|  | spin_unlock_irqrestore(&priv->driver_lock, flags); | 
|  |  | 
|  | unregister_netdev(dev); | 
|  |  | 
|  | out: | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_stop_card); | 
|  |  | 
|  |  | 
|  | static const struct net_device_ops mesh_netdev_ops = { | 
|  | .ndo_open		= lbs_dev_open, | 
|  | .ndo_stop 		= lbs_mesh_stop, | 
|  | .ndo_start_xmit		= lbs_hard_start_xmit, | 
|  | .ndo_set_mac_address	= lbs_set_mac_address, | 
|  | .ndo_set_multicast_list = lbs_set_multicast_list, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * @brief This function adds mshX interface | 
|  | * | 
|  | *  @param priv    A pointer to the struct lbs_private structure | 
|  | *  @return 	   0 if successful, -X otherwise | 
|  | */ | 
|  | static int lbs_add_mesh(struct lbs_private *priv) | 
|  | { | 
|  | struct net_device *mesh_dev = NULL; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MESH); | 
|  |  | 
|  | /* Allocate a virtual mesh device */ | 
|  | if (!(mesh_dev = alloc_netdev(0, "msh%d", ether_setup))) { | 
|  | lbs_deb_mesh("init mshX device failed\n"); | 
|  | ret = -ENOMEM; | 
|  | goto done; | 
|  | } | 
|  | mesh_dev->ml_priv = priv; | 
|  | priv->mesh_dev = mesh_dev; | 
|  |  | 
|  | mesh_dev->netdev_ops = &mesh_netdev_ops; | 
|  | mesh_dev->ethtool_ops = &lbs_ethtool_ops; | 
|  | memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, | 
|  | sizeof(priv->dev->dev_addr)); | 
|  |  | 
|  | SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent); | 
|  |  | 
|  | #ifdef	WIRELESS_EXT | 
|  | mesh_dev->wireless_handlers = (struct iw_handler_def *)&mesh_handler_def; | 
|  | #endif | 
|  | mesh_dev->flags |= IFF_BROADCAST | IFF_MULTICAST; | 
|  | /* Register virtual mesh interface */ | 
|  | ret = register_netdev(mesh_dev); | 
|  | if (ret) { | 
|  | lbs_pr_err("cannot register mshX virtual interface\n"); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | ret = sysfs_create_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group); | 
|  | if (ret) | 
|  | goto err_unregister; | 
|  |  | 
|  | lbs_persist_config_init(mesh_dev); | 
|  |  | 
|  | /* Everything successful */ | 
|  | ret = 0; | 
|  | goto done; | 
|  |  | 
|  | err_unregister: | 
|  | unregister_netdev(mesh_dev); | 
|  |  | 
|  | err_free: | 
|  | free_netdev(mesh_dev); | 
|  |  | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void lbs_remove_mesh(struct lbs_private *priv) | 
|  | { | 
|  | struct net_device *mesh_dev; | 
|  |  | 
|  |  | 
|  | mesh_dev = priv->mesh_dev; | 
|  | if (!mesh_dev) | 
|  | return; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MESH); | 
|  | netif_stop_queue(mesh_dev); | 
|  | netif_carrier_off(mesh_dev); | 
|  | sysfs_remove_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group); | 
|  | lbs_persist_config_remove(mesh_dev); | 
|  | unregister_netdev(mesh_dev); | 
|  | priv->mesh_dev = NULL; | 
|  | free_netdev(mesh_dev); | 
|  | lbs_deb_leave(LBS_DEB_MESH); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function finds the CFP in | 
|  | *  region_cfp_table based on region and band parameter. | 
|  | * | 
|  | *  @param region  The region code | 
|  | *  @param band	   The band | 
|  | *  @param cfp_no  A pointer to CFP number | 
|  | *  @return 	   A pointer to CFP | 
|  | */ | 
|  | struct chan_freq_power *lbs_get_region_cfp_table(u8 region, int *cfp_no) | 
|  | { | 
|  | int i, end; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | end = ARRAY_SIZE(region_cfp_table); | 
|  |  | 
|  | for (i = 0; i < end ; i++) { | 
|  | lbs_deb_main("region_cfp_table[i].region=%d\n", | 
|  | region_cfp_table[i].region); | 
|  | if (region_cfp_table[i].region == region) { | 
|  | *cfp_no = region_cfp_table[i].cfp_no_BG; | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | return region_cfp_table[i].cfp_BG; | 
|  | } | 
|  | } | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_MAIN, "ret NULL"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band) | 
|  | { | 
|  | int ret = 0; | 
|  | int i = 0; | 
|  |  | 
|  | struct chan_freq_power *cfp; | 
|  | int cfp_no; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  |  | 
|  | memset(priv->region_channel, 0, sizeof(priv->region_channel)); | 
|  |  | 
|  | cfp = lbs_get_region_cfp_table(region, &cfp_no); | 
|  | if (cfp != NULL) { | 
|  | priv->region_channel[i].nrcfp = cfp_no; | 
|  | priv->region_channel[i].CFP = cfp; | 
|  | } else { | 
|  | lbs_deb_main("wrong region code %#x in band B/G\n", | 
|  | region); | 
|  | ret = -1; | 
|  | goto out; | 
|  | } | 
|  | priv->region_channel[i].valid = 1; | 
|  | priv->region_channel[i].region = region; | 
|  | priv->region_channel[i].band = band; | 
|  | i++; | 
|  | out: | 
|  | lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void lbs_queue_event(struct lbs_private *priv, u32 event) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_THREAD); | 
|  | spin_lock_irqsave(&priv->driver_lock, flags); | 
|  |  | 
|  | if (priv->psstate == PS_STATE_SLEEP) | 
|  | priv->psstate = PS_STATE_AWAKE; | 
|  |  | 
|  | __kfifo_put(priv->event_fifo, (unsigned char *) &event, sizeof(u32)); | 
|  |  | 
|  | wake_up_interruptible(&priv->waitq); | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->driver_lock, flags); | 
|  | lbs_deb_leave(LBS_DEB_THREAD); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_queue_event); | 
|  |  | 
|  | void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_THREAD); | 
|  |  | 
|  | if (priv->psstate == PS_STATE_SLEEP) | 
|  | priv->psstate = PS_STATE_AWAKE; | 
|  |  | 
|  | /* Swap buffers by flipping the response index */ | 
|  | BUG_ON(resp_idx > 1); | 
|  | priv->resp_idx = resp_idx; | 
|  |  | 
|  | wake_up_interruptible(&priv->waitq); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_THREAD); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lbs_notify_command_response); | 
|  |  | 
|  | static int __init lbs_init_module(void) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  | memset(&confirm_sleep, 0, sizeof(confirm_sleep)); | 
|  | confirm_sleep.hdr.command = cpu_to_le16(CMD_802_11_PS_MODE); | 
|  | confirm_sleep.hdr.size = cpu_to_le16(sizeof(confirm_sleep)); | 
|  | confirm_sleep.action = cpu_to_le16(CMD_SUBCMD_SLEEP_CONFIRMED); | 
|  | lbs_debugfs_init(); | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit lbs_exit_module(void) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  | lbs_debugfs_remove(); | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * rtap interface support fuctions | 
|  | */ | 
|  |  | 
|  | static int lbs_rtap_open(struct net_device *dev) | 
|  | { | 
|  | /* Yes, _stop_ the queue. Because we don't support injection */ | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  | netif_carrier_off(dev); | 
|  | netif_stop_queue(dev); | 
|  | lbs_deb_leave(LBS_DEB_LEAVE); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lbs_rtap_stop(struct net_device *dev) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lbs_rtap_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | netif_stop_queue(dev); | 
|  | return NETDEV_TX_BUSY; | 
|  | } | 
|  |  | 
|  | static void lbs_remove_rtap(struct lbs_private *priv) | 
|  | { | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  | if (priv->rtap_net_dev == NULL) | 
|  | goto out; | 
|  | unregister_netdev(priv->rtap_net_dev); | 
|  | free_netdev(priv->rtap_net_dev); | 
|  | priv->rtap_net_dev = NULL; | 
|  | out: | 
|  | lbs_deb_leave(LBS_DEB_MAIN); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops rtap_netdev_ops = { | 
|  | .ndo_open = lbs_rtap_open, | 
|  | .ndo_stop = lbs_rtap_stop, | 
|  | .ndo_start_xmit = lbs_rtap_hard_start_xmit, | 
|  | }; | 
|  |  | 
|  | static int lbs_add_rtap(struct lbs_private *priv) | 
|  | { | 
|  | int ret = 0; | 
|  | struct net_device *rtap_dev; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_MAIN); | 
|  | if (priv->rtap_net_dev) { | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | rtap_dev = alloc_netdev(0, "rtap%d", ether_setup); | 
|  | if (rtap_dev == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | memcpy(rtap_dev->dev_addr, priv->current_addr, ETH_ALEN); | 
|  | rtap_dev->type = ARPHRD_IEEE80211_RADIOTAP; | 
|  | rtap_dev->netdev_ops = &rtap_netdev_ops; | 
|  | rtap_dev->ml_priv = priv; | 
|  | SET_NETDEV_DEV(rtap_dev, priv->dev->dev.parent); | 
|  |  | 
|  | ret = register_netdev(rtap_dev); | 
|  | if (ret) { | 
|  | free_netdev(rtap_dev); | 
|  | goto out; | 
|  | } | 
|  | priv->rtap_net_dev = rtap_dev; | 
|  |  | 
|  | out: | 
|  | lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | module_init(lbs_init_module); | 
|  | module_exit(lbs_exit_module); | 
|  |  | 
|  | MODULE_DESCRIPTION("Libertas WLAN Driver Library"); | 
|  | MODULE_AUTHOR("Marvell International Ltd."); | 
|  | MODULE_LICENSE("GPL"); |