drivers/parisc/eisa_enumerator.c - android_kernel_htc_msm8960 - Gitiles

 /*
  * eisa_enumerator.c - provide support for EISA adapters in PA-RISC machines
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  *
  * Copyright (c) 2002 Daniel Engstrom <5116@telia.com>
  *
  */

 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>

 #include <asm/eisa_bus.h>
 #include <asm/eisa_eeprom.h>


 /*
  * Todo:
  *
  * PORT init with MASK attr and other size than byte
  * MEMORY with other decode than 20 bit
  * CRC stuff
  * FREEFORM stuff
  */

 #define EPI 0xc80
 #define NUM_SLOT 16
 #define SLOT2PORT(x) (x<<12)


 /* macros to handle unaligned accesses and
  * byte swapping. The data in the EEPROM is
  * little-endian on the big-endian PAROSC */
 #define get_8(x) (*(u_int8_t*)(x))

 static inline u_int16_t get_16(const unsigned char *x)
 {
 	return (x[1] << 8) | x[0];
 }

 static inline u_int32_t get_32(const unsigned char *x)
 {
 	return (x[3] << 24) | (x[2] << 16) | (x[1] << 8) | x[0];
 }

 static inline u_int32_t get_24(const unsigned char *x)
 {
 	return (x[2] << 24) | (x[1] << 16) | (x[0] << 8);
 }

 static void print_eisa_id(char *s, u_int32_t id)
 {
 	char vendor[4];
 	int rev;
 	int device;

 	rev = id & 0xff;
 	id >>= 8;
 	device = id & 0xff;
 	id >>= 8;
 	vendor[3] = '\0';
 	vendor[2] = '@' + (id & 0x1f);
 	id >>= 5;
 	vendor[1] = '@' + (id & 0x1f);
 	id >>= 5;
 	vendor[0] = '@' + (id & 0x1f);
 	id >>= 5;

 	sprintf(s, "%s%02X%02X", vendor, device, rev);
 }

 static int configure_memory(const unsigned char *buf,
 		       struct resource *mem_parent,
 		       char *name)
 {
 	int len;
 	u_int8_t c;
 	int i;
 	struct resource *res;

 	len=0;

 	for (i=0;i<HPEE_MEMORY_MAX_ENT;i++) {
 		c = get_8(buf+len);

 		if (NULL != (res = kmalloc(sizeof(struct resource), GFP_KERNEL))) {
 			int result;

 			res->name = name;
 			res->start = mem_parent->start + get_24(buf+len+2);
 			res->end = res->start + get_16(buf+len+5)*1024;
 			res->flags = IORESOURCE_MEM;
 			printk("memory %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
 			result = request_resource(mem_parent, res);
 			if (result < 0) {
 				printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
 				return result;
 			}
 		}

 		len+=7;

 		if (!(c & HPEE_MEMORY_MORE)) {
 			break;
 		}
 	}

 	return len;
 }


 static int configure_irq(const unsigned char *buf)
 {
 	int len;
 	u_int8_t c;
 	int i;

 	len=0;

 	for (i=0;i<HPEE_IRQ_MAX_ENT;i++) {
 		c = get_8(buf+len);

 		printk("IRQ %d ", c & HPEE_IRQ_CHANNEL_MASK);
 		if (c & HPEE_IRQ_TRIG_LEVEL) {
 			eisa_make_irq_level(c & HPEE_IRQ_CHANNEL_MASK);
 		} else {
 			eisa_make_irq_edge(c & HPEE_IRQ_CHANNEL_MASK);
 		}

 		len+=2;
 		/* hpux seems to allow for
 		 * two bytes of irq data but only defines one of
 		 * them, I think */
 		if  (!(c & HPEE_IRQ_MORE)) {
 			break;
 		}
 	}

 	return len;
 }


 static int configure_dma(const unsigned char *buf)
 {
 	int len;
 	u_int8_t c;
 	int i;

 	len=0;

 	for (i=0;i<HPEE_DMA_MAX_ENT;i++) {
 		c = get_8(buf+len);
 		printk("DMA %d ", c&HPEE_DMA_CHANNEL_MASK);
 		/* fixme: maybe initialize the dma channel withthe timing ? */
 		len+=2;
 		if (!(c & HPEE_DMA_MORE)) {
 			break;
 		}
 	}

 	return len;
 }

 static int configure_port(const unsigned char *buf, struct resource *io_parent,
 		     char *board)
 {
 	int len;
 	u_int8_t c;
 	int i;
 	struct resource *res;
 	int result;

 	len=0;

 	for (i=0;i<HPEE_PORT_MAX_ENT;i++) {
 		c = get_8(buf+len);

 		if (NULL != (res = kmalloc(sizeof(struct resource), GFP_KERNEL))) {
 			res->name = board;
 			res->start = get_16(buf+len+1);
 			res->end = get_16(buf+len+1)+(c&HPEE_PORT_SIZE_MASK)+1;
 			res->flags = IORESOURCE_IO;
 			printk("ioports %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
 			result = request_resource(io_parent, res);
 			if (result < 0) {
 				printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
 				return result;
 			}
 		}

 		len+=3;
 		if (!(c & HPEE_PORT_MORE)) {
 			break;
 		}
 	}

 	return len;
 }


 /* byte 1 and 2 is the port number to write
  * and at byte 3 the value to write starts.
  * I assume that there are and- and or- masks
  * here when HPEE_PORT_INIT_MASK is set but I have
  * not yet encountered this. */
 static int configure_port_init(const unsigned char *buf)
 {
 	int len=0;
 	u_int8_t c;

 	while (len<HPEE_PORT_INIT_MAX_LEN) {
 		int s=0;
 		c = get_8(buf+len);

 		switch (c & HPEE_PORT_INIT_WIDTH_MASK)  {
 		 case HPEE_PORT_INIT_WIDTH_BYTE:
 			s=1;
 			if (c & HPEE_PORT_INIT_MASK) {
 				printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
 				outb((inb(get_16(buf+len+1) &
 					  get_8(buf+len+3)) |
 				      get_8(buf+len+4)), get_16(buf+len+1));

 			} else {
 				outb(get_8(buf+len+3), get_16(buf+len+1));

 			}
 			break;
 		 case HPEE_PORT_INIT_WIDTH_WORD:
 			s=2;
 			if (c & HPEE_PORT_INIT_MASK) {
  				printk(KERN_WARNING "port_init: unverified mask attribute\n");
 				       outw((inw(get_16(buf+len+1)) &
 					     get_16(buf+len+3)) |
 					    get_16(buf+len+5),
 					    get_16(buf+len+1));
 			} else {
 				outw(cpu_to_le16(get_16(buf+len+3)), get_16(buf+len+1));
 			}
 			break;
 		 case HPEE_PORT_INIT_WIDTH_DWORD:
 			s=4;
 			if (c & HPEE_PORT_INIT_MASK) {
  				printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
 				outl((inl(get_16(buf+len+1) &
 					  get_32(buf+len+3)) |
 				      get_32(buf+len+7)), get_16(buf+len+1));
 			} else {
 				outl(cpu_to_le32(get_32(buf+len+3)), get_16(buf+len+1));
 			}

 			break;
 		 default:
 			printk("\n" KERN_ERR "Invalid port init word %02x\n", c);
 			return 0;
 		}

 		if (c & HPEE_PORT_INIT_MASK) {
 			s*=2;
 		}

 		len+=s+3;
 		if (!(c & HPEE_PORT_INIT_MORE)) {
 			break;
 		}
 	}

 	return len;
 }

 static int configure_choise(const unsigned char *buf, u_int8_t *info)
 {
 	int len;

 	/* theis record contain the value of the functions
 	 * configuration choises and an info byte which
 	 * describes which other records to expect in this
 	 * function */
 	len = get_8(buf);
 	*info=get_8(buf+len+1);

 	return len+2;
 }

 static int configure_type_string(const unsigned char *buf)
 {
 	int len;

 	/* just skip past the type field */
 	len = get_8(buf);
 	if (len > 80) {
 		printk("\n" KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
 	}

 	return 1+len;
 }

 static int configure_function(const unsigned char *buf, int *more)
 {
 	/* the init field seems to be a two-byte field
 	 * which is non-zero if there are an other function following
 	 * I think it is the length of the function def
 	 */
 	*more = get_16(buf);

 	return 2;
 }

 static int parse_slot_config(int slot,
 			     const unsigned char *buf,
 			     struct eeprom_eisa_slot_info *es,
 			     struct resource *io_parent,
 			     struct resource *mem_parent)
 {
 	int res=0;
 	int function_len;
 	unsigned int pos=0;
 	unsigned int maxlen;
 	int num_func=0;
 	u_int8_t flags;
 	int p0;

 	char *board;
 	int id_string_used=0;

 	if (NULL == (board = kmalloc(8, GFP_KERNEL))) {
 		return -1;
 	}
 	print_eisa_id(board, es->eisa_slot_id);
 	printk(KERN_INFO "EISA slot %d: %s %s ",
 	       slot, board, es->flags&HPEE_FLAG_BOARD_IS_ISA ? "ISA" : "EISA");

 	maxlen = es->config_data_length < HPEE_MAX_LENGTH ?
 			 es->config_data_length : HPEE_MAX_LENGTH;
 	while ((pos < maxlen) && (num_func <= es->num_functions)) {
 		pos+=configure_function(buf+pos, &function_len);

 		if (!function_len) {
 			break;
 		}
 		num_func++;
 		p0 = pos;
 		pos += configure_choise(buf+pos, &flags);

 		if (flags & HPEE_FUNCTION_INFO_F_DISABLED) {
 			/* function disabled, skip silently */
 			pos = p0 + function_len;
 			continue;
 		}
 		if (flags & HPEE_FUNCTION_INFO_CFG_FREE_FORM) {
 			/* I have no idea how to handle this */
 			printk("function %d have free-form confgiuration, skipping ",
 				num_func);
 			pos = p0 + function_len;
 			continue;
 		}

 		/* the ordering of the sections need
 		 * more investigation.
 		 * Currently I think that memory comaed before IRQ
 		 * I assume the order is LSB to MSB in the
 		 * info flags
 		 * eg type, memory, irq, dma, port, HPEE_PORT_init
 		 */

 		if (flags & HPEE_FUNCTION_INFO_HAVE_TYPE) {
 			pos += configure_type_string(buf+pos);
 		}

 		if (flags & HPEE_FUNCTION_INFO_HAVE_MEMORY) {
 			id_string_used=1;
 			pos += configure_memory(buf+pos, mem_parent, board);
 		}

 		if (flags & HPEE_FUNCTION_INFO_HAVE_IRQ) {
 			pos += configure_irq(buf+pos);
 		}

 		if (flags & HPEE_FUNCTION_INFO_HAVE_DMA) {
 			pos += configure_dma(buf+pos);
 		}

 		if (flags & HPEE_FUNCTION_INFO_HAVE_PORT) {
 			id_string_used=1;
 			pos += configure_port(buf+pos, io_parent, board);
 		}

 		if (flags &  HPEE_FUNCTION_INFO_HAVE_PORT_INIT) {
 			pos += configure_port_init(buf+pos);
 		}

 		if (p0 + function_len < pos) {
 			printk("\n" KERN_ERR "eisa_enumerator: function %d length mis-match "
 			       "got %d, expected %d\n",
 			       num_func, pos-p0, function_len);
 			res=-1;
 			break;
 		}
 		pos = p0 + function_len;
 	}
 	printk("\n");
 	if (!id_string_used) {
 		kfree(board);
 	}

 	if (pos != es->config_data_length) {
 		printk(KERN_ERR "eisa_enumerator: config data length mis-match got %d, expected %d\n",
 			pos, es->config_data_length);
 		res=-1;
 	}

 	if (num_func != es->num_functions) {
 		printk(KERN_ERR "eisa_enumerator: number of functions mis-match got %d, expected %d\n",
 			num_func, es->num_functions);
 		res=-2;
 	}

 	return res;

 }

 static int init_slot(int slot, struct eeprom_eisa_slot_info *es)
 {
 	unsigned int id;

 	char id_string[8];

 	if (!(es->slot_info&HPEE_SLOT_INFO_NO_READID)) {
 		/* try to read the id of the board in the slot */
 		id = le32_to_cpu(inl(SLOT2PORT(slot)+EPI));

 		if (0xffffffff == id) {
 			/* Maybe we didn't expect a card to be here... */
 			if (es->eisa_slot_id == 0xffffffff)
 				return -1;

 			/* this board is not here or it does not
 			 * support readid
 			 */
 			printk(KERN_ERR "EISA slot %d a configured board was not detected (",
 			       slot);

 			print_eisa_id(id_string, es->eisa_slot_id);
 			printk(" expected %s)\n", id_string);

 			return -1;

 		}
 		if (es->eisa_slot_id != id) {
 			print_eisa_id(id_string, id);
 			printk(KERN_ERR "EISA slot %d id mis-match: got %s",
 			       slot, id_string);

 			print_eisa_id(id_string, es->eisa_slot_id);
 			printk(" expected %s \n", id_string);

 			return -1;

 		}
 	}

 	/* now: we need to enable the board if
 	 * it supports enabling and run through
 	 * the port init sction if present
 	 * and finally record any interrupt polarity
 	 */
 	if (es->slot_features & HPEE_SLOT_FEATURES_ENABLE) {
 		/* enable board */
 		outb(0x01| inb(SLOT2PORT(slot)+EPI+4),
 		     SLOT2PORT(slot)+EPI+4);
 	}

 	return 0;
 }


 int eisa_enumerator(unsigned long eeprom_addr,
 		    struct resource *io_parent, struct resource *mem_parent)
 {
 	int i;
 	struct eeprom_header *eh;
 	static char eeprom_buf[HPEE_MAX_LENGTH];

 	for (i=0; i < HPEE_MAX_LENGTH; i++) {
 		eeprom_buf[i] = gsc_readb(eeprom_addr+i);
 	}

 	printk(KERN_INFO "Enumerating EISA bus\n");

 	eh = (struct eeprom_header*)(eeprom_buf);
 	for (i=0;i<eh->num_slots;i++) {
 		struct eeprom_eisa_slot_info *es;

 		es = (struct eeprom_eisa_slot_info*)
 			(&eeprom_buf[HPEE_SLOT_INFO(i)]);

 		if (-1==init_slot(i+1, es)) {
 			continue;
 		}

 		if (es->config_data_offset < HPEE_MAX_LENGTH) {
 			if (parse_slot_config(i+1, &eeprom_buf[es->config_data_offset],
 					      es, io_parent, mem_parent)) {
 				return -1;
 			}
 		} else {
 			printk (KERN_WARNING "EISA EEPROM offset 0x%x out of range\n",es->config_data_offset);
 			return -1;
 		}
 	}
 	return eh->num_slots;
 }
	/*
	* eisa_enumerator.c - provide support for EISA adapters in PA-RISC machines
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*
	* Copyright (c) 2002 Daniel Engstrom <5116@telia.com>
	*
	*/

	#include <linux/ioport.h>
	#include <linux/init.h>
	#include <linux/kernel.h>
	#include <linux/slab.h>
	#include <asm/io.h>
	#include <asm/uaccess.h>
	#include <asm/byteorder.h>

	#include <asm/eisa_bus.h>
	#include <asm/eisa_eeprom.h>


	/*
	* Todo:
	*
	* PORT init with MASK attr and other size than byte
	* MEMORY with other decode than 20 bit
	* CRC stuff
	* FREEFORM stuff
	*/

	#define EPI 0xc80
	#define NUM_SLOT 16
	#define SLOT2PORT(x) (x<<12)


	/* macros to handle unaligned accesses and
	* byte swapping. The data in the EEPROM is
	* little-endian on the big-endian PAROSC */
	#define get_8(x) ((u_int8_t)(x))

	static inline u_int16_t get_16(const unsigned char *x)
	{
	return (x[1] << 8) \| x[0];
	}

	static inline u_int32_t get_32(const unsigned char *x)
	{
	return (x[3] << 24) \| (x[2] << 16) \| (x[1] << 8) \| x[0];
	}

	static inline u_int32_t get_24(const unsigned char *x)
	{
	return (x[2] << 24) \| (x[1] << 16) \| (x[0] << 8);
	}

	static void print_eisa_id(char *s, u_int32_t id)
	{
	char vendor[4];
	int rev;
	int device;

	rev = id & 0xff;
	id >>= 8;
	device = id & 0xff;
	id >>= 8;
	vendor[3] = '\0';
	vendor[2] = '@' + (id & 0x1f);
	id >>= 5;
	vendor[1] = '@' + (id & 0x1f);
	id >>= 5;
	vendor[0] = '@' + (id & 0x1f);
	id >>= 5;

	sprintf(s, "%s%02X%02X", vendor, device, rev);
	}

	static int configure_memory(const unsigned char *buf,
	struct resource *mem_parent,
	char *name)
	{
	int len;
	u_int8_t c;
	int i;
	struct resource *res;

	len=0;

	for (i=0;i<HPEE_MEMORY_MAX_ENT;i++) {
	c = get_8(buf+len);

	if (NULL != (res = kmalloc(sizeof(struct resource), GFP_KERNEL))) {
	int result;

	res->name = name;
	res->start = mem_parent->start + get_24(buf+len+2);
	res->end = res->start + get_16(buf+len+5)*1024;
	res->flags = IORESOURCE_MEM;
	printk("memory %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
	result = request_resource(mem_parent, res);
	if (result < 0) {
	printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
	return result;
	}
	}

	len+=7;

	if (!(c & HPEE_MEMORY_MORE)) {
	break;
	}
	}

	return len;
	}


	static int configure_irq(const unsigned char *buf)
	{
	int len;
	u_int8_t c;
	int i;

	len=0;

	for (i=0;i<HPEE_IRQ_MAX_ENT;i++) {
	c = get_8(buf+len);

	printk("IRQ %d ", c & HPEE_IRQ_CHANNEL_MASK);
	if (c & HPEE_IRQ_TRIG_LEVEL) {
	eisa_make_irq_level(c & HPEE_IRQ_CHANNEL_MASK);
	} else {
	eisa_make_irq_edge(c & HPEE_IRQ_CHANNEL_MASK);
	}

	len+=2;
	/* hpux seems to allow for
	* two bytes of irq data but only defines one of
	* them, I think */
	if (!(c & HPEE_IRQ_MORE)) {
	break;
	}
	}

	return len;
	}


	static int configure_dma(const unsigned char *buf)
	{
	int len;
	u_int8_t c;
	int i;

	len=0;

	for (i=0;i<HPEE_DMA_MAX_ENT;i++) {
	c = get_8(buf+len);
	printk("DMA %d ", c&HPEE_DMA_CHANNEL_MASK);
	/* fixme: maybe initialize the dma channel withthe timing ? */
	len+=2;
	if (!(c & HPEE_DMA_MORE)) {
	break;
	}
	}

	return len;
	}

	static int configure_port(const unsigned char buf, struct resource io_parent,
	char *board)
	{
	int len;
	u_int8_t c;
	int i;
	struct resource *res;
	int result;

	len=0;

	for (i=0;i<HPEE_PORT_MAX_ENT;i++) {
	c = get_8(buf+len);

	if (NULL != (res = kmalloc(sizeof(struct resource), GFP_KERNEL))) {
	res->name = board;
	res->start = get_16(buf+len+1);
	res->end = get_16(buf+len+1)+(c&HPEE_PORT_SIZE_MASK)+1;
	res->flags = IORESOURCE_IO;
	printk("ioports %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
	result = request_resource(io_parent, res);
	if (result < 0) {
	printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
	return result;
	}
	}

	len+=3;
	if (!(c & HPEE_PORT_MORE)) {
	break;
	}
	}

	return len;
	}


	/* byte 1 and 2 is the port number to write
	* and at byte 3 the value to write starts.
	* I assume that there are and- and or- masks
	* here when HPEE_PORT_INIT_MASK is set but I have
	* not yet encountered this. */
	static int configure_port_init(const unsigned char *buf)
	{
	int len=0;
	u_int8_t c;

	while (len<HPEE_PORT_INIT_MAX_LEN) {
	int s=0;
	c = get_8(buf+len);

	switch (c & HPEE_PORT_INIT_WIDTH_MASK) {
	case HPEE_PORT_INIT_WIDTH_BYTE:
	s=1;
	if (c & HPEE_PORT_INIT_MASK) {
	printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
	outb((inb(get_16(buf+len+1) &
	get_8(buf+len+3)) \|
	get_8(buf+len+4)), get_16(buf+len+1));

	} else {
	outb(get_8(buf+len+3), get_16(buf+len+1));

	}
	break;
	case HPEE_PORT_INIT_WIDTH_WORD:
	s=2;
	if (c & HPEE_PORT_INIT_MASK) {
	printk(KERN_WARNING "port_init: unverified mask attribute\n");
	outw((inw(get_16(buf+len+1)) &
	get_16(buf+len+3)) \|
	get_16(buf+len+5),
	get_16(buf+len+1));
	} else {
	outw(cpu_to_le16(get_16(buf+len+3)), get_16(buf+len+1));
	}
	break;
	case HPEE_PORT_INIT_WIDTH_DWORD:
	s=4;
	if (c & HPEE_PORT_INIT_MASK) {
	printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
	outl((inl(get_16(buf+len+1) &
	get_32(buf+len+3)) \|
	get_32(buf+len+7)), get_16(buf+len+1));
	} else {
	outl(cpu_to_le32(get_32(buf+len+3)), get_16(buf+len+1));
	}

	break;
	default:
	printk("\n" KERN_ERR "Invalid port init word %02x\n", c);
	return 0;
	}

	if (c & HPEE_PORT_INIT_MASK) {
	s*=2;
	}

	len+=s+3;
	if (!(c & HPEE_PORT_INIT_MORE)) {
	break;
	}
	}

	return len;
	}

	static int configure_choise(const unsigned char buf, u_int8_t info)
	{
	int len;

	/* theis record contain the value of the functions
	* configuration choises and an info byte which
	* describes which other records to expect in this
	* function */
	len = get_8(buf);
	*info=get_8(buf+len+1);

	return len+2;
	}

	static int configure_type_string(const unsigned char *buf)
	{
	int len;

	/* just skip past the type field */
	len = get_8(buf);
	if (len > 80) {
	printk("\n" KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
	}

	return 1+len;
	}

	static int configure_function(const unsigned char buf, int more)
	{
	/* the init field seems to be a two-byte field
	* which is non-zero if there are an other function following
	* I think it is the length of the function def
	*/
	*more = get_16(buf);

	return 2;
	}

	static int parse_slot_config(int slot,
	const unsigned char *buf,
	struct eeprom_eisa_slot_info *es,
	struct resource *io_parent,
	struct resource *mem_parent)
	{
	int res=0;
	int function_len;
	unsigned int pos=0;
	unsigned int maxlen;
	int num_func=0;
	u_int8_t flags;
	int p0;

	char *board;
	int id_string_used=0;

	if (NULL == (board = kmalloc(8, GFP_KERNEL))) {
	return -1;
	}
	print_eisa_id(board, es->eisa_slot_id);
	printk(KERN_INFO "EISA slot %d: %s %s ",
	slot, board, es->flags&HPEE_FLAG_BOARD_IS_ISA ? "ISA" : "EISA");

	maxlen = es->config_data_length < HPEE_MAX_LENGTH ?
	es->config_data_length : HPEE_MAX_LENGTH;
	while ((pos < maxlen) && (num_func <= es->num_functions)) {
	pos+=configure_function(buf+pos, &function_len);

	if (!function_len) {
	break;
	}
	num_func++;
	p0 = pos;
	pos += configure_choise(buf+pos, &flags);

	if (flags & HPEE_FUNCTION_INFO_F_DISABLED) {
	/* function disabled, skip silently */
	pos = p0 + function_len;
	continue;
	}
	if (flags & HPEE_FUNCTION_INFO_CFG_FREE_FORM) {
	/* I have no idea how to handle this */
	printk("function %d have free-form confgiuration, skipping ",
	num_func);
	pos = p0 + function_len;
	continue;
	}

	/* the ordering of the sections need
	* more investigation.
	* Currently I think that memory comaed before IRQ
	* I assume the order is LSB to MSB in the
	* info flags
	* eg type, memory, irq, dma, port, HPEE_PORT_init
	*/

	if (flags & HPEE_FUNCTION_INFO_HAVE_TYPE) {
	pos += configure_type_string(buf+pos);
	}

	if (flags & HPEE_FUNCTION_INFO_HAVE_MEMORY) {
	id_string_used=1;
	pos += configure_memory(buf+pos, mem_parent, board);
	}

	if (flags & HPEE_FUNCTION_INFO_HAVE_IRQ) {
	pos += configure_irq(buf+pos);
	}

	if (flags & HPEE_FUNCTION_INFO_HAVE_DMA) {
	pos += configure_dma(buf+pos);
	}

	if (flags & HPEE_FUNCTION_INFO_HAVE_PORT) {
	id_string_used=1;
	pos += configure_port(buf+pos, io_parent, board);
	}

	if (flags & HPEE_FUNCTION_INFO_HAVE_PORT_INIT) {
	pos += configure_port_init(buf+pos);
	}

	if (p0 + function_len < pos) {
	printk("\n" KERN_ERR "eisa_enumerator: function %d length mis-match "
	"got %d, expected %d\n",
	num_func, pos-p0, function_len);
	res=-1;
	break;
	}
	pos = p0 + function_len;
	}
	printk("\n");
	if (!id_string_used) {
	kfree(board);
	}

	if (pos != es->config_data_length) {
	printk(KERN_ERR "eisa_enumerator: config data length mis-match got %d, expected %d\n",
	pos, es->config_data_length);
	res=-1;
	}

	if (num_func != es->num_functions) {
	printk(KERN_ERR "eisa_enumerator: number of functions mis-match got %d, expected %d\n",
	num_func, es->num_functions);
	res=-2;
	}

	return res;

	}

	static int init_slot(int slot, struct eeprom_eisa_slot_info *es)
	{
	unsigned int id;

	char id_string[8];

	if (!(es->slot_info&HPEE_SLOT_INFO_NO_READID)) {
	/* try to read the id of the board in the slot */
	id = le32_to_cpu(inl(SLOT2PORT(slot)+EPI));

	if (0xffffffff == id) {
	/* Maybe we didn't expect a card to be here... */
	if (es->eisa_slot_id == 0xffffffff)
	return -1;

	/* this board is not here or it does not
	* support readid
	*/
	printk(KERN_ERR "EISA slot %d a configured board was not detected (",
	slot);

	print_eisa_id(id_string, es->eisa_slot_id);
	printk(" expected %s)\n", id_string);

	return -1;

	}
	if (es->eisa_slot_id != id) {
	print_eisa_id(id_string, id);
	printk(KERN_ERR "EISA slot %d id mis-match: got %s",
	slot, id_string);

	print_eisa_id(id_string, es->eisa_slot_id);
	printk(" expected %s \n", id_string);

	return -1;

	}
	}

	/* now: we need to enable the board if
	* it supports enabling and run through
	* the port init sction if present
	* and finally record any interrupt polarity
	*/
	if (es->slot_features & HPEE_SLOT_FEATURES_ENABLE) {
	/* enable board */
	outb(0x01\| inb(SLOT2PORT(slot)+EPI+4),
	SLOT2PORT(slot)+EPI+4);
	}

	return 0;
	}


	int eisa_enumerator(unsigned long eeprom_addr,
	struct resource io_parent, struct resource mem_parent)
	{
	int i;
	struct eeprom_header *eh;
	static char eeprom_buf[HPEE_MAX_LENGTH];

	for (i=0; i < HPEE_MAX_LENGTH; i++) {
	eeprom_buf[i] = gsc_readb(eeprom_addr+i);
	}

	printk(KERN_INFO "Enumerating EISA bus\n");

	eh = (struct eeprom_header*)(eeprom_buf);
	for (i=0;i<eh->num_slots;i++) {
	struct eeprom_eisa_slot_info *es;

	es = (struct eeprom_eisa_slot_info*)
	(&eeprom_buf[HPEE_SLOT_INFO(i)]);

	if (-1==init_slot(i+1, es)) {
	continue;
	}

	if (es->config_data_offset < HPEE_MAX_LENGTH) {
	if (parse_slot_config(i+1, &eeprom_buf[es->config_data_offset],
	es, io_parent, mem_parent)) {
	return -1;
	}
	} else {
	printk (KERN_WARNING "EISA EEPROM offset 0x%x out of range\n",es->config_data_offset);
	return -1;
	}
	}
	return eh->num_slots;
	}