|  | /* | 
|  | * RTC client/driver for the Maxim/Dallas DS1374 Real-Time Clock over I2C | 
|  | * | 
|  | * Based on code by Randy Vinson <rvinson@mvista.com>, | 
|  | * which was based on the m41t00.c by Mark Greer <mgreer@mvista.com>. | 
|  | * | 
|  | * Copyright (C) 2006-2007 Freescale Semiconductor | 
|  | * | 
|  | * 2005 (c) MontaVista Software, Inc. This file is licensed under | 
|  | * the terms of the GNU General Public License version 2. This program | 
|  | * is licensed "as is" without any warranty of any kind, whether express | 
|  | * or implied. | 
|  | */ | 
|  | /* | 
|  | * It would be more efficient to use i2c msgs/i2c_transfer directly but, as | 
|  | * recommened in .../Documentation/i2c/writing-clients section | 
|  | * "Sending and receiving", using SMBus level communication is preferred. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/rtc.h> | 
|  | #include <linux/bcd.h> | 
|  | #include <linux/workqueue.h> | 
|  |  | 
|  | #define DS1374_REG_TOD0		0x00 /* Time of Day */ | 
|  | #define DS1374_REG_TOD1		0x01 | 
|  | #define DS1374_REG_TOD2		0x02 | 
|  | #define DS1374_REG_TOD3		0x03 | 
|  | #define DS1374_REG_WDALM0	0x04 /* Watchdog/Alarm */ | 
|  | #define DS1374_REG_WDALM1	0x05 | 
|  | #define DS1374_REG_WDALM2	0x06 | 
|  | #define DS1374_REG_CR		0x07 /* Control */ | 
|  | #define DS1374_REG_CR_AIE	0x01 /* Alarm Int. Enable */ | 
|  | #define DS1374_REG_CR_WDALM	0x20 /* 1=Watchdog, 0=Alarm */ | 
|  | #define DS1374_REG_CR_WACE	0x40 /* WD/Alarm counter enable */ | 
|  | #define DS1374_REG_SR		0x08 /* Status */ | 
|  | #define DS1374_REG_SR_OSF	0x80 /* Oscillator Stop Flag */ | 
|  | #define DS1374_REG_SR_AF	0x01 /* Alarm Flag */ | 
|  | #define DS1374_REG_TCR		0x09 /* Trickle Charge */ | 
|  |  | 
|  | static const struct i2c_device_id ds1374_id[] = { | 
|  | { "ds1374", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, ds1374_id); | 
|  |  | 
|  | struct ds1374 { | 
|  | struct i2c_client *client; | 
|  | struct rtc_device *rtc; | 
|  | struct work_struct work; | 
|  |  | 
|  | /* The mutex protects alarm operations, and prevents a race | 
|  | * between the enable_irq() in the workqueue and the free_irq() | 
|  | * in the remove function. | 
|  | */ | 
|  | struct mutex mutex; | 
|  | int exiting; | 
|  | }; | 
|  |  | 
|  | static struct i2c_driver ds1374_driver; | 
|  |  | 
|  | static int ds1374_read_rtc(struct i2c_client *client, u32 *time, | 
|  | int reg, int nbytes) | 
|  | { | 
|  | u8 buf[4]; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | if (nbytes > 4) { | 
|  | WARN_ON(1); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ret = i2c_smbus_read_i2c_block_data(client, reg, nbytes, buf); | 
|  |  | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | if (ret < nbytes) | 
|  | return -EIO; | 
|  |  | 
|  | for (i = nbytes - 1, *time = 0; i >= 0; i--) | 
|  | *time = (*time << 8) | buf[i]; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ds1374_write_rtc(struct i2c_client *client, u32 time, | 
|  | int reg, int nbytes) | 
|  | { | 
|  | u8 buf[4]; | 
|  | int i; | 
|  |  | 
|  | if (nbytes > 4) { | 
|  | WARN_ON(1); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < nbytes; i++) { | 
|  | buf[i] = time & 0xff; | 
|  | time >>= 8; | 
|  | } | 
|  |  | 
|  | return i2c_smbus_write_i2c_block_data(client, reg, nbytes, buf); | 
|  | } | 
|  |  | 
|  | static int ds1374_check_rtc_status(struct i2c_client *client) | 
|  | { | 
|  | int ret = 0; | 
|  | int control, stat; | 
|  |  | 
|  | stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR); | 
|  | if (stat < 0) | 
|  | return stat; | 
|  |  | 
|  | if (stat & DS1374_REG_SR_OSF) | 
|  | dev_warn(&client->dev, | 
|  | "oscillator discontinuity flagged, " | 
|  | "time unreliable\n"); | 
|  |  | 
|  | stat &= ~(DS1374_REG_SR_OSF | DS1374_REG_SR_AF); | 
|  |  | 
|  | ret = i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* If the alarm is pending, clear it before requesting | 
|  | * the interrupt, so an interrupt event isn't reported | 
|  | * before everything is initialized. | 
|  | */ | 
|  |  | 
|  | control = i2c_smbus_read_byte_data(client, DS1374_REG_CR); | 
|  | if (control < 0) | 
|  | return control; | 
|  |  | 
|  | control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE); | 
|  | return i2c_smbus_write_byte_data(client, DS1374_REG_CR, control); | 
|  | } | 
|  |  | 
|  | static int ds1374_read_time(struct device *dev, struct rtc_time *time) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | u32 itime; | 
|  | int ret; | 
|  |  | 
|  | ret = ds1374_read_rtc(client, &itime, DS1374_REG_TOD0, 4); | 
|  | if (!ret) | 
|  | rtc_time_to_tm(itime, time); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ds1374_set_time(struct device *dev, struct rtc_time *time) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | unsigned long itime; | 
|  |  | 
|  | rtc_tm_to_time(time, &itime); | 
|  | return ds1374_write_rtc(client, itime, DS1374_REG_TOD0, 4); | 
|  | } | 
|  |  | 
|  | /* The ds1374 has a decrementer for an alarm, rather than a comparator. | 
|  | * If the time of day is changed, then the alarm will need to be | 
|  | * reset. | 
|  | */ | 
|  | static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct ds1374 *ds1374 = i2c_get_clientdata(client); | 
|  | u32 now, cur_alarm; | 
|  | int cr, sr; | 
|  | int ret = 0; | 
|  |  | 
|  | if (client->irq <= 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&ds1374->mutex); | 
|  |  | 
|  | cr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | sr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_SR); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | ret = ds1374_read_rtc(client, &now, DS1374_REG_TOD0, 4); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | ret = ds1374_read_rtc(client, &cur_alarm, DS1374_REG_WDALM0, 3); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | rtc_time_to_tm(now + cur_alarm, &alarm->time); | 
|  | alarm->enabled = !!(cr & DS1374_REG_CR_WACE); | 
|  | alarm->pending = !!(sr & DS1374_REG_SR_AF); | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&ds1374->mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct ds1374 *ds1374 = i2c_get_clientdata(client); | 
|  | struct rtc_time now; | 
|  | unsigned long new_alarm, itime; | 
|  | int cr; | 
|  | int ret = 0; | 
|  |  | 
|  | if (client->irq <= 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = ds1374_read_time(dev, &now); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | rtc_tm_to_time(&alarm->time, &new_alarm); | 
|  | rtc_tm_to_time(&now, &itime); | 
|  |  | 
|  | /* This can happen due to races, in addition to dates that are | 
|  | * truly in the past.  To avoid requiring the caller to check for | 
|  | * races, dates in the past are assumed to be in the recent past | 
|  | * (i.e. not something that we'd rather the caller know about via | 
|  | * an error), and the alarm is set to go off as soon as possible. | 
|  | */ | 
|  | if (time_before_eq(new_alarm, itime)) | 
|  | new_alarm = 1; | 
|  | else | 
|  | new_alarm -= itime; | 
|  |  | 
|  | mutex_lock(&ds1374->mutex); | 
|  |  | 
|  | ret = cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | /* Disable any existing alarm before setting the new one | 
|  | * (or lack thereof). */ | 
|  | cr &= ~DS1374_REG_CR_WACE; | 
|  |  | 
|  | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | ret = ds1374_write_rtc(client, new_alarm, DS1374_REG_WDALM0, 3); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | if (alarm->enabled) { | 
|  | cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE; | 
|  | cr &= ~DS1374_REG_CR_WDALM; | 
|  |  | 
|  | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr); | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&ds1374->mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static irqreturn_t ds1374_irq(int irq, void *dev_id) | 
|  | { | 
|  | struct i2c_client *client = dev_id; | 
|  | struct ds1374 *ds1374 = i2c_get_clientdata(client); | 
|  |  | 
|  | disable_irq_nosync(irq); | 
|  | schedule_work(&ds1374->work); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void ds1374_work(struct work_struct *work) | 
|  | { | 
|  | struct ds1374 *ds1374 = container_of(work, struct ds1374, work); | 
|  | struct i2c_client *client = ds1374->client; | 
|  | int stat, control; | 
|  |  | 
|  | mutex_lock(&ds1374->mutex); | 
|  |  | 
|  | stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR); | 
|  | if (stat < 0) | 
|  | return; | 
|  |  | 
|  | if (stat & DS1374_REG_SR_AF) { | 
|  | stat &= ~DS1374_REG_SR_AF; | 
|  | i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat); | 
|  |  | 
|  | control = i2c_smbus_read_byte_data(client, DS1374_REG_CR); | 
|  | if (control < 0) | 
|  | goto out; | 
|  |  | 
|  | control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE); | 
|  | i2c_smbus_write_byte_data(client, DS1374_REG_CR, control); | 
|  |  | 
|  | /* rtc_update_irq() assumes that it is called | 
|  | * from IRQ-disabled context. | 
|  | */ | 
|  | local_irq_disable(); | 
|  | rtc_update_irq(ds1374->rtc, 1, RTC_AF | RTC_IRQF); | 
|  | local_irq_enable(); | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (!ds1374->exiting) | 
|  | enable_irq(client->irq); | 
|  |  | 
|  | mutex_unlock(&ds1374->mutex); | 
|  | } | 
|  |  | 
|  | static int ds1374_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct ds1374 *ds1374 = i2c_get_clientdata(client); | 
|  | int ret = -ENOIOCTLCMD; | 
|  |  | 
|  | mutex_lock(&ds1374->mutex); | 
|  |  | 
|  | switch (cmd) { | 
|  | case RTC_AIE_OFF: | 
|  | ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | ret &= ~DS1374_REG_CR_WACE; | 
|  |  | 
|  | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, ret); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case RTC_AIE_ON: | 
|  | ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | ret |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE; | 
|  | ret &= ~DS1374_REG_CR_WDALM; | 
|  |  | 
|  | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, ret); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | break; | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&ds1374->mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct rtc_class_ops ds1374_rtc_ops = { | 
|  | .read_time = ds1374_read_time, | 
|  | .set_time = ds1374_set_time, | 
|  | .read_alarm = ds1374_read_alarm, | 
|  | .set_alarm = ds1374_set_alarm, | 
|  | .ioctl = ds1374_ioctl, | 
|  | }; | 
|  |  | 
|  | static int ds1374_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct ds1374 *ds1374; | 
|  | int ret; | 
|  |  | 
|  | ds1374 = kzalloc(sizeof(struct ds1374), GFP_KERNEL); | 
|  | if (!ds1374) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ds1374->client = client; | 
|  | i2c_set_clientdata(client, ds1374); | 
|  |  | 
|  | INIT_WORK(&ds1374->work, ds1374_work); | 
|  | mutex_init(&ds1374->mutex); | 
|  |  | 
|  | ret = ds1374_check_rtc_status(client); | 
|  | if (ret) | 
|  | goto out_free; | 
|  |  | 
|  | if (client->irq > 0) { | 
|  | ret = request_irq(client->irq, ds1374_irq, 0, | 
|  | "ds1374", client); | 
|  | if (ret) { | 
|  | dev_err(&client->dev, "unable to request IRQ\n"); | 
|  | goto out_free; | 
|  | } | 
|  | } | 
|  |  | 
|  | ds1374->rtc = rtc_device_register(client->name, &client->dev, | 
|  | &ds1374_rtc_ops, THIS_MODULE); | 
|  | if (IS_ERR(ds1374->rtc)) { | 
|  | ret = PTR_ERR(ds1374->rtc); | 
|  | dev_err(&client->dev, "unable to register the class device\n"); | 
|  | goto out_irq; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_irq: | 
|  | if (client->irq > 0) | 
|  | free_irq(client->irq, client); | 
|  |  | 
|  | out_free: | 
|  | i2c_set_clientdata(client, NULL); | 
|  | kfree(ds1374); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit ds1374_remove(struct i2c_client *client) | 
|  | { | 
|  | struct ds1374 *ds1374 = i2c_get_clientdata(client); | 
|  |  | 
|  | if (client->irq > 0) { | 
|  | mutex_lock(&ds1374->mutex); | 
|  | ds1374->exiting = 1; | 
|  | mutex_unlock(&ds1374->mutex); | 
|  |  | 
|  | free_irq(client->irq, client); | 
|  | flush_scheduled_work(); | 
|  | } | 
|  |  | 
|  | rtc_device_unregister(ds1374->rtc); | 
|  | i2c_set_clientdata(client, NULL); | 
|  | kfree(ds1374); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int ds1374_suspend(struct i2c_client *client, pm_message_t state) | 
|  | { | 
|  | if (client->irq >= 0 && device_may_wakeup(&client->dev)) | 
|  | enable_irq_wake(client->irq); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ds1374_resume(struct i2c_client *client) | 
|  | { | 
|  | if (client->irq >= 0 && device_may_wakeup(&client->dev)) | 
|  | disable_irq_wake(client->irq); | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define ds1374_suspend	NULL | 
|  | #define ds1374_resume	NULL | 
|  | #endif | 
|  |  | 
|  | static struct i2c_driver ds1374_driver = { | 
|  | .driver = { | 
|  | .name = "rtc-ds1374", | 
|  | .owner = THIS_MODULE, | 
|  | }, | 
|  | .probe = ds1374_probe, | 
|  | .suspend = ds1374_suspend, | 
|  | .resume = ds1374_resume, | 
|  | .remove = __devexit_p(ds1374_remove), | 
|  | .id_table = ds1374_id, | 
|  | }; | 
|  |  | 
|  | static int __init ds1374_init(void) | 
|  | { | 
|  | return i2c_add_driver(&ds1374_driver); | 
|  | } | 
|  |  | 
|  | static void __exit ds1374_exit(void) | 
|  | { | 
|  | i2c_del_driver(&ds1374_driver); | 
|  | } | 
|  |  | 
|  | module_init(ds1374_init); | 
|  | module_exit(ds1374_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Scott Wood <scottwood@freescale.com>"); | 
|  | MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC Driver"); | 
|  | MODULE_LICENSE("GPL"); |