|  | /* | 
|  | *	Adaptec AAC series RAID controller driver | 
|  | *	(c) Copyright 2001 Red Hat Inc. | 
|  | * | 
|  | * based on the old aacraid driver that is.. | 
|  | * Adaptec aacraid device driver for Linux. | 
|  | * | 
|  | * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com) | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2, or (at your option) | 
|  | * any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; see the file COPYING.  If not, write to | 
|  | * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/completion.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <linux/highmem.h> /* For flush_kernel_dcache_page */ | 
|  |  | 
|  | #include <scsi/scsi.h> | 
|  | #include <scsi/scsi_cmnd.h> | 
|  | #include <scsi/scsi_device.h> | 
|  | #include <scsi/scsi_host.h> | 
|  |  | 
|  | #include "aacraid.h" | 
|  |  | 
|  | /* values for inqd_pdt: Peripheral device type in plain English */ | 
|  | #define	INQD_PDT_DA	0x00	/* Direct-access (DISK) device */ | 
|  | #define	INQD_PDT_PROC	0x03	/* Processor device */ | 
|  | #define	INQD_PDT_CHNGR	0x08	/* Changer (jukebox, scsi2) */ | 
|  | #define	INQD_PDT_COMM	0x09	/* Communication device (scsi2) */ | 
|  | #define	INQD_PDT_NOLUN2 0x1f	/* Unknown Device (scsi2) */ | 
|  | #define	INQD_PDT_NOLUN	0x7f	/* Logical Unit Not Present */ | 
|  |  | 
|  | #define	INQD_PDT_DMASK	0x1F	/* Peripheral Device Type Mask */ | 
|  | #define	INQD_PDT_QMASK	0xE0	/* Peripheral Device Qualifer Mask */ | 
|  |  | 
|  | /* | 
|  | *	Sense codes | 
|  | */ | 
|  |  | 
|  | #define SENCODE_NO_SENSE			0x00 | 
|  | #define SENCODE_END_OF_DATA			0x00 | 
|  | #define SENCODE_BECOMING_READY			0x04 | 
|  | #define SENCODE_INIT_CMD_REQUIRED		0x04 | 
|  | #define SENCODE_PARAM_LIST_LENGTH_ERROR		0x1A | 
|  | #define SENCODE_INVALID_COMMAND			0x20 | 
|  | #define SENCODE_LBA_OUT_OF_RANGE		0x21 | 
|  | #define SENCODE_INVALID_CDB_FIELD		0x24 | 
|  | #define SENCODE_LUN_NOT_SUPPORTED		0x25 | 
|  | #define SENCODE_INVALID_PARAM_FIELD		0x26 | 
|  | #define SENCODE_PARAM_NOT_SUPPORTED		0x26 | 
|  | #define SENCODE_PARAM_VALUE_INVALID		0x26 | 
|  | #define SENCODE_RESET_OCCURRED			0x29 | 
|  | #define SENCODE_LUN_NOT_SELF_CONFIGURED_YET	0x3E | 
|  | #define SENCODE_INQUIRY_DATA_CHANGED		0x3F | 
|  | #define SENCODE_SAVING_PARAMS_NOT_SUPPORTED	0x39 | 
|  | #define SENCODE_DIAGNOSTIC_FAILURE		0x40 | 
|  | #define SENCODE_INTERNAL_TARGET_FAILURE		0x44 | 
|  | #define SENCODE_INVALID_MESSAGE_ERROR		0x49 | 
|  | #define SENCODE_LUN_FAILED_SELF_CONFIG		0x4c | 
|  | #define SENCODE_OVERLAPPED_COMMAND		0x4E | 
|  |  | 
|  | /* | 
|  | *	Additional sense codes | 
|  | */ | 
|  |  | 
|  | #define ASENCODE_NO_SENSE			0x00 | 
|  | #define ASENCODE_END_OF_DATA			0x05 | 
|  | #define ASENCODE_BECOMING_READY			0x01 | 
|  | #define ASENCODE_INIT_CMD_REQUIRED		0x02 | 
|  | #define ASENCODE_PARAM_LIST_LENGTH_ERROR	0x00 | 
|  | #define ASENCODE_INVALID_COMMAND		0x00 | 
|  | #define ASENCODE_LBA_OUT_OF_RANGE		0x00 | 
|  | #define ASENCODE_INVALID_CDB_FIELD		0x00 | 
|  | #define ASENCODE_LUN_NOT_SUPPORTED		0x00 | 
|  | #define ASENCODE_INVALID_PARAM_FIELD		0x00 | 
|  | #define ASENCODE_PARAM_NOT_SUPPORTED		0x01 | 
|  | #define ASENCODE_PARAM_VALUE_INVALID		0x02 | 
|  | #define ASENCODE_RESET_OCCURRED			0x00 | 
|  | #define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET	0x00 | 
|  | #define ASENCODE_INQUIRY_DATA_CHANGED		0x03 | 
|  | #define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED	0x00 | 
|  | #define ASENCODE_DIAGNOSTIC_FAILURE		0x80 | 
|  | #define ASENCODE_INTERNAL_TARGET_FAILURE	0x00 | 
|  | #define ASENCODE_INVALID_MESSAGE_ERROR		0x00 | 
|  | #define ASENCODE_LUN_FAILED_SELF_CONFIG		0x00 | 
|  | #define ASENCODE_OVERLAPPED_COMMAND		0x00 | 
|  |  | 
|  | #define BYTE0(x) (unsigned char)(x) | 
|  | #define BYTE1(x) (unsigned char)((x) >> 8) | 
|  | #define BYTE2(x) (unsigned char)((x) >> 16) | 
|  | #define BYTE3(x) (unsigned char)((x) >> 24) | 
|  |  | 
|  | /*------------------------------------------------------------------------------ | 
|  | *              S T R U C T S / T Y P E D E F S | 
|  | *----------------------------------------------------------------------------*/ | 
|  | /* SCSI inquiry data */ | 
|  | struct inquiry_data { | 
|  | u8 inqd_pdt;	/* Peripheral qualifier | Peripheral Device Type */ | 
|  | u8 inqd_dtq;	/* RMB | Device Type Qualifier */ | 
|  | u8 inqd_ver;	/* ISO version | ECMA version | ANSI-approved version */ | 
|  | u8 inqd_rdf;	/* AENC | TrmIOP | Response data format */ | 
|  | u8 inqd_len;	/* Additional length (n-4) */ | 
|  | u8 inqd_pad1[2];/* Reserved - must be zero */ | 
|  | u8 inqd_pad2;	/* RelAdr | WBus32 | WBus16 |  Sync  | Linked |Reserved| CmdQue | SftRe */ | 
|  | u8 inqd_vid[8];	/* Vendor ID */ | 
|  | u8 inqd_pid[16];/* Product ID */ | 
|  | u8 inqd_prl[4];	/* Product Revision Level */ | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *              M O D U L E   G L O B A L S | 
|  | */ | 
|  |  | 
|  | static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* sgmap); | 
|  | static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg); | 
|  | static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg); | 
|  | static int aac_send_srb_fib(struct scsi_cmnd* scsicmd); | 
|  | #ifdef AAC_DETAILED_STATUS_INFO | 
|  | static char *aac_get_status_string(u32 status); | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | *	Non dasd selection is handled entirely in aachba now | 
|  | */ | 
|  |  | 
|  | static int nondasd = -1; | 
|  | static int aac_cache = 2;	/* WCE=0 to avoid performance problems */ | 
|  | static int dacmode = -1; | 
|  | int aac_msi; | 
|  | int aac_commit = -1; | 
|  | int startup_timeout = 180; | 
|  | int aif_timeout = 120; | 
|  |  | 
|  | module_param(nondasd, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices." | 
|  | " 0=off, 1=on"); | 
|  | module_param_named(cache, aac_cache, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n" | 
|  | "\tbit 0 - Disable FUA in WRITE SCSI commands\n" | 
|  | "\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n" | 
|  | "\tbit 2 - Disable only if Battery is protecting Cache"); | 
|  | module_param(dacmode, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC." | 
|  | " 0=off, 1=on"); | 
|  | module_param_named(commit, aac_commit, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the" | 
|  | " adapter for foreign arrays.\n" | 
|  | "This is typically needed in systems that do not have a BIOS." | 
|  | " 0=off, 1=on"); | 
|  | module_param_named(msi, aac_msi, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(msi, "IRQ handling." | 
|  | " 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI)"); | 
|  | module_param(startup_timeout, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for" | 
|  | " adapter to have it's kernel up and\n" | 
|  | "running. This is typically adjusted for large systems that do not" | 
|  | " have a BIOS."); | 
|  | module_param(aif_timeout, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(aif_timeout, "The duration of time in seconds to wait for" | 
|  | " applications to pick up AIFs before\n" | 
|  | "deregistering them. This is typically adjusted for heavily burdened" | 
|  | " systems."); | 
|  |  | 
|  | int numacb = -1; | 
|  | module_param(numacb, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control" | 
|  | " blocks (FIB) allocated. Valid values are 512 and down. Default is" | 
|  | " to use suggestion from Firmware."); | 
|  |  | 
|  | int acbsize = -1; | 
|  | module_param(acbsize, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB)" | 
|  | " size. Valid values are 512, 2048, 4096 and 8192. Default is to use" | 
|  | " suggestion from Firmware."); | 
|  |  | 
|  | int update_interval = 30 * 60; | 
|  | module_param(update_interval, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(update_interval, "Interval in seconds between time sync" | 
|  | " updates issued to adapter."); | 
|  |  | 
|  | int check_interval = 24 * 60 * 60; | 
|  | module_param(check_interval, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(check_interval, "Interval in seconds between adapter health" | 
|  | " checks."); | 
|  |  | 
|  | int aac_check_reset = 1; | 
|  | module_param_named(check_reset, aac_check_reset, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(check_reset, "If adapter fails health check, reset the" | 
|  | " adapter. a value of -1 forces the reset to adapters programmed to" | 
|  | " ignore it."); | 
|  |  | 
|  | int expose_physicals = -1; | 
|  | module_param(expose_physicals, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays." | 
|  | " -1=protect 0=off, 1=on"); | 
|  |  | 
|  | int aac_reset_devices; | 
|  | module_param_named(reset_devices, aac_reset_devices, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(reset_devices, "Force an adapter reset at initialization."); | 
|  |  | 
|  | int aac_wwn = 1; | 
|  | module_param_named(wwn, aac_wwn, int, S_IRUGO|S_IWUSR); | 
|  | MODULE_PARM_DESC(wwn, "Select a WWN type for the arrays:\n" | 
|  | "\t0 - Disable\n" | 
|  | "\t1 - Array Meta Data Signature (default)\n" | 
|  | "\t2 - Adapter Serial Number"); | 
|  |  | 
|  |  | 
|  | static inline int aac_valid_context(struct scsi_cmnd *scsicmd, | 
|  | struct fib *fibptr) { | 
|  | struct scsi_device *device; | 
|  |  | 
|  | if (unlikely(!scsicmd || !scsicmd->scsi_done)) { | 
|  | dprintk((KERN_WARNING "aac_valid_context: scsi command corrupt\n")); | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | return 0; | 
|  | } | 
|  | scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL; | 
|  | device = scsicmd->device; | 
|  | if (unlikely(!device || !scsi_device_online(device))) { | 
|  | dprintk((KERN_WARNING "aac_valid_context: scsi device corrupt\n")); | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | return 0; | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	aac_get_config_status	-	check the adapter configuration | 
|  | *	@common: adapter to query | 
|  | * | 
|  | *	Query config status, and commit the configuration if needed. | 
|  | */ | 
|  | int aac_get_config_status(struct aac_dev *dev, int commit_flag) | 
|  | { | 
|  | int status = 0; | 
|  | struct fib * fibptr; | 
|  |  | 
|  | if (!(fibptr = aac_fib_alloc(dev))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  | { | 
|  | struct aac_get_config_status *dinfo; | 
|  | dinfo = (struct aac_get_config_status *) fib_data(fibptr); | 
|  |  | 
|  | dinfo->command = cpu_to_le32(VM_ContainerConfig); | 
|  | dinfo->type = cpu_to_le32(CT_GET_CONFIG_STATUS); | 
|  | dinfo->count = cpu_to_le32(sizeof(((struct aac_get_config_status_resp *)NULL)->data)); | 
|  | } | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof (struct aac_get_config_status), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, NULL); | 
|  | if (status < 0) { | 
|  | printk(KERN_WARNING "aac_get_config_status: SendFIB failed.\n"); | 
|  | } else { | 
|  | struct aac_get_config_status_resp *reply | 
|  | = (struct aac_get_config_status_resp *) fib_data(fibptr); | 
|  | dprintk((KERN_WARNING | 
|  | "aac_get_config_status: response=%d status=%d action=%d\n", | 
|  | le32_to_cpu(reply->response), | 
|  | le32_to_cpu(reply->status), | 
|  | le32_to_cpu(reply->data.action))); | 
|  | if ((le32_to_cpu(reply->response) != ST_OK) || | 
|  | (le32_to_cpu(reply->status) != CT_OK) || | 
|  | (le32_to_cpu(reply->data.action) > CFACT_PAUSE)) { | 
|  | printk(KERN_WARNING "aac_get_config_status: Will not issue the Commit Configuration\n"); | 
|  | status = -EINVAL; | 
|  | } | 
|  | } | 
|  | aac_fib_complete(fibptr); | 
|  | /* Send a CT_COMMIT_CONFIG to enable discovery of devices */ | 
|  | if (status >= 0) { | 
|  | if ((aac_commit == 1) || commit_flag) { | 
|  | struct aac_commit_config * dinfo; | 
|  | aac_fib_init(fibptr); | 
|  | dinfo = (struct aac_commit_config *) fib_data(fibptr); | 
|  |  | 
|  | dinfo->command = cpu_to_le32(VM_ContainerConfig); | 
|  | dinfo->type = cpu_to_le32(CT_COMMIT_CONFIG); | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof (struct aac_commit_config), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, NULL); | 
|  | aac_fib_complete(fibptr); | 
|  | } else if (aac_commit == 0) { | 
|  | printk(KERN_WARNING | 
|  | "aac_get_config_status: Foreign device configurations are being ignored\n"); | 
|  | } | 
|  | } | 
|  | aac_fib_free(fibptr); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	aac_get_containers	-	list containers | 
|  | *	@common: adapter to probe | 
|  | * | 
|  | *	Make a list of all containers on this controller | 
|  | */ | 
|  | int aac_get_containers(struct aac_dev *dev) | 
|  | { | 
|  | struct fsa_dev_info *fsa_dev_ptr; | 
|  | u32 index; | 
|  | int status = 0; | 
|  | struct fib * fibptr; | 
|  | struct aac_get_container_count *dinfo; | 
|  | struct aac_get_container_count_resp *dresp; | 
|  | int maximum_num_containers = MAXIMUM_NUM_CONTAINERS; | 
|  |  | 
|  | if (!(fibptr = aac_fib_alloc(dev))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  | dinfo = (struct aac_get_container_count *) fib_data(fibptr); | 
|  | dinfo->command = cpu_to_le32(VM_ContainerConfig); | 
|  | dinfo->type = cpu_to_le32(CT_GET_CONTAINER_COUNT); | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof (struct aac_get_container_count), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, NULL); | 
|  | if (status >= 0) { | 
|  | dresp = (struct aac_get_container_count_resp *)fib_data(fibptr); | 
|  | maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries); | 
|  | aac_fib_complete(fibptr); | 
|  | } | 
|  | aac_fib_free(fibptr); | 
|  |  | 
|  | if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS) | 
|  | maximum_num_containers = MAXIMUM_NUM_CONTAINERS; | 
|  | fsa_dev_ptr = kzalloc(sizeof(*fsa_dev_ptr) * maximum_num_containers, | 
|  | GFP_KERNEL); | 
|  | if (!fsa_dev_ptr) | 
|  | return -ENOMEM; | 
|  |  | 
|  | dev->fsa_dev = fsa_dev_ptr; | 
|  | dev->maximum_num_containers = maximum_num_containers; | 
|  |  | 
|  | for (index = 0; index < dev->maximum_num_containers; ) { | 
|  | fsa_dev_ptr[index].devname[0] = '\0'; | 
|  |  | 
|  | status = aac_probe_container(dev, index); | 
|  |  | 
|  | if (status < 0) { | 
|  | printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	If there are no more containers, then stop asking. | 
|  | */ | 
|  | if (++index >= status) | 
|  | break; | 
|  | } | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static void get_container_name_callback(void *context, struct fib * fibptr) | 
|  | { | 
|  | struct aac_get_name_resp * get_name_reply; | 
|  | struct scsi_cmnd * scsicmd; | 
|  |  | 
|  | scsicmd = (struct scsi_cmnd *) context; | 
|  |  | 
|  | if (!aac_valid_context(scsicmd, fibptr)) | 
|  | return; | 
|  |  | 
|  | dprintk((KERN_DEBUG "get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies)); | 
|  | BUG_ON(fibptr == NULL); | 
|  |  | 
|  | get_name_reply = (struct aac_get_name_resp *) fib_data(fibptr); | 
|  | /* Failure is irrelevant, using default value instead */ | 
|  | if ((le32_to_cpu(get_name_reply->status) == CT_OK) | 
|  | && (get_name_reply->data[0] != '\0')) { | 
|  | char *sp = get_name_reply->data; | 
|  | sp[sizeof(((struct aac_get_name_resp *)NULL)->data)-1] = '\0'; | 
|  | while (*sp == ' ') | 
|  | ++sp; | 
|  | if (*sp) { | 
|  | struct inquiry_data inq; | 
|  | char d[sizeof(((struct inquiry_data *)NULL)->inqd_pid)]; | 
|  | int count = sizeof(d); | 
|  | char *dp = d; | 
|  | do { | 
|  | *dp++ = (*sp) ? *sp++ : ' '; | 
|  | } while (--count > 0); | 
|  |  | 
|  | scsi_sg_copy_to_buffer(scsicmd, &inq, sizeof(inq)); | 
|  | memcpy(inq.inqd_pid, d, sizeof(d)); | 
|  | scsi_sg_copy_from_buffer(scsicmd, &inq, sizeof(inq)); | 
|  | } | 
|  | } | 
|  |  | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  |  | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	aac_get_container_name	-	get container name, none blocking. | 
|  | */ | 
|  | static int aac_get_container_name(struct scsi_cmnd * scsicmd) | 
|  | { | 
|  | int status; | 
|  | struct aac_get_name *dinfo; | 
|  | struct fib * cmd_fibcontext; | 
|  | struct aac_dev * dev; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  |  | 
|  | if (!(cmd_fibcontext = aac_fib_alloc(dev))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | aac_fib_init(cmd_fibcontext); | 
|  | dinfo = (struct aac_get_name *) fib_data(cmd_fibcontext); | 
|  |  | 
|  | dinfo->command = cpu_to_le32(VM_ContainerConfig); | 
|  | dinfo->type = cpu_to_le32(CT_READ_NAME); | 
|  | dinfo->cid = cpu_to_le32(scmd_id(scsicmd)); | 
|  | dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data)); | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | cmd_fibcontext, | 
|  | sizeof (struct aac_get_name), | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback)get_container_name_callback, | 
|  | (void *) scsicmd); | 
|  |  | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status); | 
|  | aac_fib_complete(cmd_fibcontext); | 
|  | aac_fib_free(cmd_fibcontext); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int aac_probe_container_callback2(struct scsi_cmnd * scsicmd) | 
|  | { | 
|  | struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev; | 
|  |  | 
|  | if ((fsa_dev_ptr[scmd_id(scsicmd)].valid & 1)) | 
|  | return aac_scsi_cmd(scsicmd); | 
|  |  | 
|  | scsicmd->result = DID_NO_CONNECT << 16; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void _aac_probe_container2(void * context, struct fib * fibptr) | 
|  | { | 
|  | struct fsa_dev_info *fsa_dev_ptr; | 
|  | int (*callback)(struct scsi_cmnd *); | 
|  | struct scsi_cmnd * scsicmd = (struct scsi_cmnd *)context; | 
|  |  | 
|  |  | 
|  | if (!aac_valid_context(scsicmd, fibptr)) | 
|  | return; | 
|  |  | 
|  | scsicmd->SCp.Status = 0; | 
|  | fsa_dev_ptr = fibptr->dev->fsa_dev; | 
|  | if (fsa_dev_ptr) { | 
|  | struct aac_mount * dresp = (struct aac_mount *) fib_data(fibptr); | 
|  | fsa_dev_ptr += scmd_id(scsicmd); | 
|  |  | 
|  | if ((le32_to_cpu(dresp->status) == ST_OK) && | 
|  | (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) && | 
|  | (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) { | 
|  | fsa_dev_ptr->valid = 1; | 
|  | /* sense_key holds the current state of the spin-up */ | 
|  | if (dresp->mnt[0].state & cpu_to_le32(FSCS_NOT_READY)) | 
|  | fsa_dev_ptr->sense_data.sense_key = NOT_READY; | 
|  | else if (fsa_dev_ptr->sense_data.sense_key == NOT_READY) | 
|  | fsa_dev_ptr->sense_data.sense_key = NO_SENSE; | 
|  | fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol); | 
|  | fsa_dev_ptr->size | 
|  | = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) + | 
|  | (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32); | 
|  | fsa_dev_ptr->ro = ((le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) != 0); | 
|  | } | 
|  | if ((fsa_dev_ptr->valid & 1) == 0) | 
|  | fsa_dev_ptr->valid = 0; | 
|  | scsicmd->SCp.Status = le32_to_cpu(dresp->count); | 
|  | } | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | callback = (int (*)(struct scsi_cmnd *))(scsicmd->SCp.ptr); | 
|  | scsicmd->SCp.ptr = NULL; | 
|  | (*callback)(scsicmd); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void _aac_probe_container1(void * context, struct fib * fibptr) | 
|  | { | 
|  | struct scsi_cmnd * scsicmd; | 
|  | struct aac_mount * dresp; | 
|  | struct aac_query_mount *dinfo; | 
|  | int status; | 
|  |  | 
|  | dresp = (struct aac_mount *) fib_data(fibptr); | 
|  | dresp->mnt[0].capacityhigh = 0; | 
|  | if ((le32_to_cpu(dresp->status) != ST_OK) || | 
|  | (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE)) { | 
|  | _aac_probe_container2(context, fibptr); | 
|  | return; | 
|  | } | 
|  | scsicmd = (struct scsi_cmnd *) context; | 
|  |  | 
|  | if (!aac_valid_context(scsicmd, fibptr)) | 
|  | return; | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  |  | 
|  | dinfo = (struct aac_query_mount *)fib_data(fibptr); | 
|  |  | 
|  | dinfo->command = cpu_to_le32(VM_NameServe64); | 
|  | dinfo->count = cpu_to_le32(scmd_id(scsicmd)); | 
|  | dinfo->type = cpu_to_le32(FT_FILESYS); | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof(struct aac_query_mount), | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | _aac_probe_container2, | 
|  | (void *) scsicmd); | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | else if (status < 0) { | 
|  | /* Inherit results from VM_NameServe, if any */ | 
|  | dresp->status = cpu_to_le32(ST_OK); | 
|  | _aac_probe_container2(context, fibptr); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int _aac_probe_container(struct scsi_cmnd * scsicmd, int (*callback)(struct scsi_cmnd *)) | 
|  | { | 
|  | struct fib * fibptr; | 
|  | int status = -ENOMEM; | 
|  |  | 
|  | if ((fibptr = aac_fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata))) { | 
|  | struct aac_query_mount *dinfo; | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  |  | 
|  | dinfo = (struct aac_query_mount *)fib_data(fibptr); | 
|  |  | 
|  | dinfo->command = cpu_to_le32(VM_NameServe); | 
|  | dinfo->count = cpu_to_le32(scmd_id(scsicmd)); | 
|  | dinfo->type = cpu_to_le32(FT_FILESYS); | 
|  | scsicmd->SCp.ptr = (char *)callback; | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof(struct aac_query_mount), | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | _aac_probe_container1, | 
|  | (void *) scsicmd); | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  | if (status < 0) { | 
|  | scsicmd->SCp.ptr = NULL; | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | } | 
|  | } | 
|  | if (status < 0) { | 
|  | struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev; | 
|  | if (fsa_dev_ptr) { | 
|  | fsa_dev_ptr += scmd_id(scsicmd); | 
|  | if ((fsa_dev_ptr->valid & 1) == 0) { | 
|  | fsa_dev_ptr->valid = 0; | 
|  | return (*callback)(scsicmd); | 
|  | } | 
|  | } | 
|  | } | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	aac_probe_container		-	query a logical volume | 
|  | *	@dev: device to query | 
|  | *	@cid: container identifier | 
|  | * | 
|  | *	Queries the controller about the given volume. The volume information | 
|  | *	is updated in the struct fsa_dev_info structure rather than returned. | 
|  | */ | 
|  | static int aac_probe_container_callback1(struct scsi_cmnd * scsicmd) | 
|  | { | 
|  | scsicmd->device = NULL; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int aac_probe_container(struct aac_dev *dev, int cid) | 
|  | { | 
|  | struct scsi_cmnd *scsicmd = kmalloc(sizeof(*scsicmd), GFP_KERNEL); | 
|  | struct scsi_device *scsidev = kmalloc(sizeof(*scsidev), GFP_KERNEL); | 
|  | int status; | 
|  |  | 
|  | if (!scsicmd || !scsidev) { | 
|  | kfree(scsicmd); | 
|  | kfree(scsidev); | 
|  | return -ENOMEM; | 
|  | } | 
|  | scsicmd->list.next = NULL; | 
|  | scsicmd->scsi_done = (void (*)(struct scsi_cmnd*))aac_probe_container_callback1; | 
|  |  | 
|  | scsicmd->device = scsidev; | 
|  | scsidev->sdev_state = 0; | 
|  | scsidev->id = cid; | 
|  | scsidev->host = dev->scsi_host_ptr; | 
|  |  | 
|  | if (_aac_probe_container(scsicmd, aac_probe_container_callback1) == 0) | 
|  | while (scsicmd->device == scsidev) | 
|  | schedule(); | 
|  | kfree(scsidev); | 
|  | status = scsicmd->SCp.Status; | 
|  | kfree(scsicmd); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* Local Structure to set SCSI inquiry data strings */ | 
|  | struct scsi_inq { | 
|  | char vid[8];         /* Vendor ID */ | 
|  | char pid[16];        /* Product ID */ | 
|  | char prl[4];         /* Product Revision Level */ | 
|  | }; | 
|  |  | 
|  | /** | 
|  | *	InqStrCopy	-	string merge | 
|  | *	@a:	string to copy from | 
|  | *	@b:	string to copy to | 
|  | * | 
|  | *	Copy a String from one location to another | 
|  | *	without copying \0 | 
|  | */ | 
|  |  | 
|  | static void inqstrcpy(char *a, char *b) | 
|  | { | 
|  |  | 
|  | while (*a != (char)0) | 
|  | *b++ = *a++; | 
|  | } | 
|  |  | 
|  | static char *container_types[] = { | 
|  | "None", | 
|  | "Volume", | 
|  | "Mirror", | 
|  | "Stripe", | 
|  | "RAID5", | 
|  | "SSRW", | 
|  | "SSRO", | 
|  | "Morph", | 
|  | "Legacy", | 
|  | "RAID4", | 
|  | "RAID10", | 
|  | "RAID00", | 
|  | "V-MIRRORS", | 
|  | "PSEUDO R4", | 
|  | "RAID50", | 
|  | "RAID5D", | 
|  | "RAID5D0", | 
|  | "RAID1E", | 
|  | "RAID6", | 
|  | "RAID60", | 
|  | "Unknown" | 
|  | }; | 
|  |  | 
|  | char * get_container_type(unsigned tindex) | 
|  | { | 
|  | if (tindex >= ARRAY_SIZE(container_types)) | 
|  | tindex = ARRAY_SIZE(container_types) - 1; | 
|  | return container_types[tindex]; | 
|  | } | 
|  |  | 
|  | /* Function: setinqstr | 
|  | * | 
|  | * Arguments: [1] pointer to void [1] int | 
|  | * | 
|  | * Purpose: Sets SCSI inquiry data strings for vendor, product | 
|  | * and revision level. Allows strings to be set in platform dependant | 
|  | * files instead of in OS dependant driver source. | 
|  | */ | 
|  |  | 
|  | static void setinqstr(struct aac_dev *dev, void *data, int tindex) | 
|  | { | 
|  | struct scsi_inq *str; | 
|  |  | 
|  | str = (struct scsi_inq *)(data); /* cast data to scsi inq block */ | 
|  | memset(str, ' ', sizeof(*str)); | 
|  |  | 
|  | if (dev->supplement_adapter_info.AdapterTypeText[0]) { | 
|  | char * cp = dev->supplement_adapter_info.AdapterTypeText; | 
|  | int c; | 
|  | if ((cp[0] == 'A') && (cp[1] == 'O') && (cp[2] == 'C')) | 
|  | inqstrcpy("SMC", str->vid); | 
|  | else { | 
|  | c = sizeof(str->vid); | 
|  | while (*cp && *cp != ' ' && --c) | 
|  | ++cp; | 
|  | c = *cp; | 
|  | *cp = '\0'; | 
|  | inqstrcpy (dev->supplement_adapter_info.AdapterTypeText, | 
|  | str->vid); | 
|  | *cp = c; | 
|  | while (*cp && *cp != ' ') | 
|  | ++cp; | 
|  | } | 
|  | while (*cp == ' ') | 
|  | ++cp; | 
|  | /* last six chars reserved for vol type */ | 
|  | c = 0; | 
|  | if (strlen(cp) > sizeof(str->pid)) { | 
|  | c = cp[sizeof(str->pid)]; | 
|  | cp[sizeof(str->pid)] = '\0'; | 
|  | } | 
|  | inqstrcpy (cp, str->pid); | 
|  | if (c) | 
|  | cp[sizeof(str->pid)] = c; | 
|  | } else { | 
|  | struct aac_driver_ident *mp = aac_get_driver_ident(dev->cardtype); | 
|  |  | 
|  | inqstrcpy (mp->vname, str->vid); | 
|  | /* last six chars reserved for vol type */ | 
|  | inqstrcpy (mp->model, str->pid); | 
|  | } | 
|  |  | 
|  | if (tindex < ARRAY_SIZE(container_types)){ | 
|  | char *findit = str->pid; | 
|  |  | 
|  | for ( ; *findit != ' '; findit++); /* walk till we find a space */ | 
|  | /* RAID is superfluous in the context of a RAID device */ | 
|  | if (memcmp(findit-4, "RAID", 4) == 0) | 
|  | *(findit -= 4) = ' '; | 
|  | if (((findit - str->pid) + strlen(container_types[tindex])) | 
|  | < (sizeof(str->pid) + sizeof(str->prl))) | 
|  | inqstrcpy (container_types[tindex], findit + 1); | 
|  | } | 
|  | inqstrcpy ("V1.0", str->prl); | 
|  | } | 
|  |  | 
|  | static void get_container_serial_callback(void *context, struct fib * fibptr) | 
|  | { | 
|  | struct aac_get_serial_resp * get_serial_reply; | 
|  | struct scsi_cmnd * scsicmd; | 
|  |  | 
|  | BUG_ON(fibptr == NULL); | 
|  |  | 
|  | scsicmd = (struct scsi_cmnd *) context; | 
|  | if (!aac_valid_context(scsicmd, fibptr)) | 
|  | return; | 
|  |  | 
|  | get_serial_reply = (struct aac_get_serial_resp *) fib_data(fibptr); | 
|  | /* Failure is irrelevant, using default value instead */ | 
|  | if (le32_to_cpu(get_serial_reply->status) == CT_OK) { | 
|  | char sp[13]; | 
|  | /* EVPD bit set */ | 
|  | sp[0] = INQD_PDT_DA; | 
|  | sp[1] = scsicmd->cmnd[2]; | 
|  | sp[2] = 0; | 
|  | sp[3] = snprintf(sp+4, sizeof(sp)-4, "%08X", | 
|  | le32_to_cpu(get_serial_reply->uid)); | 
|  | scsi_sg_copy_from_buffer(scsicmd, sp, sizeof(sp)); | 
|  | } | 
|  |  | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  |  | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	aac_get_container_serial - get container serial, none blocking. | 
|  | */ | 
|  | static int aac_get_container_serial(struct scsi_cmnd * scsicmd) | 
|  | { | 
|  | int status; | 
|  | struct aac_get_serial *dinfo; | 
|  | struct fib * cmd_fibcontext; | 
|  | struct aac_dev * dev; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  |  | 
|  | if (!(cmd_fibcontext = aac_fib_alloc(dev))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | aac_fib_init(cmd_fibcontext); | 
|  | dinfo = (struct aac_get_serial *) fib_data(cmd_fibcontext); | 
|  |  | 
|  | dinfo->command = cpu_to_le32(VM_ContainerConfig); | 
|  | dinfo->type = cpu_to_le32(CT_CID_TO_32BITS_UID); | 
|  | dinfo->cid = cpu_to_le32(scmd_id(scsicmd)); | 
|  |  | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | cmd_fibcontext, | 
|  | sizeof (struct aac_get_serial), | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) get_container_serial_callback, | 
|  | (void *) scsicmd); | 
|  |  | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_WARNING "aac_get_container_serial: aac_fib_send failed with status: %d.\n", status); | 
|  | aac_fib_complete(cmd_fibcontext); | 
|  | aac_fib_free(cmd_fibcontext); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Function: setinqserial | 
|  | * | 
|  | * Arguments: [1] pointer to void [1] int | 
|  | * | 
|  | * Purpose: Sets SCSI Unit Serial number. | 
|  | *          This is a fake. We should read a proper | 
|  | *          serial number from the container. <SuSE>But | 
|  | *          without docs it's quite hard to do it :-) | 
|  | *          So this will have to do in the meantime.</SuSE> | 
|  | */ | 
|  |  | 
|  | static int setinqserial(struct aac_dev *dev, void *data, int cid) | 
|  | { | 
|  | /* | 
|  | *	This breaks array migration. | 
|  | */ | 
|  | return snprintf((char *)(data), sizeof(struct scsi_inq) - 4, "%08X%02X", | 
|  | le32_to_cpu(dev->adapter_info.serial[0]), cid); | 
|  | } | 
|  |  | 
|  | static inline void set_sense(struct sense_data *sense_data, u8 sense_key, | 
|  | u8 sense_code, u8 a_sense_code, u8 bit_pointer, u16 field_pointer) | 
|  | { | 
|  | u8 *sense_buf = (u8 *)sense_data; | 
|  | /* Sense data valid, err code 70h */ | 
|  | sense_buf[0] = 0x70; /* No info field */ | 
|  | sense_buf[1] = 0;	/* Segment number, always zero */ | 
|  |  | 
|  | sense_buf[2] = sense_key;	/* Sense key */ | 
|  |  | 
|  | sense_buf[12] = sense_code;	/* Additional sense code */ | 
|  | sense_buf[13] = a_sense_code;	/* Additional sense code qualifier */ | 
|  |  | 
|  | if (sense_key == ILLEGAL_REQUEST) { | 
|  | sense_buf[7] = 10;	/* Additional sense length */ | 
|  |  | 
|  | sense_buf[15] = bit_pointer; | 
|  | /* Illegal parameter is in the parameter block */ | 
|  | if (sense_code == SENCODE_INVALID_CDB_FIELD) | 
|  | sense_buf[15] |= 0xc0;/* Std sense key specific field */ | 
|  | /* Illegal parameter is in the CDB block */ | 
|  | sense_buf[16] = field_pointer >> 8;	/* MSB */ | 
|  | sense_buf[17] = field_pointer;		/* LSB */ | 
|  | } else | 
|  | sense_buf[7] = 6;	/* Additional sense length */ | 
|  | } | 
|  |  | 
|  | static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba) | 
|  | { | 
|  | if (lba & 0xffffffff00000000LL) { | 
|  | int cid = scmd_id(cmd); | 
|  | dprintk((KERN_DEBUG "aacraid: Illegal lba\n")); | 
|  | cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | | 
|  | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense(&dev->fsa_dev[cid].sense_data, | 
|  | HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE, | 
|  | ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0); | 
|  | memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | 
|  | min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), | 
|  | SCSI_SENSE_BUFFERSIZE)); | 
|  | cmd->scsi_done(cmd); | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int aac_bounds_64(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void io_callback(void *context, struct fib * fibptr); | 
|  |  | 
|  | static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count) | 
|  | { | 
|  | u16 fibsize; | 
|  | struct aac_raw_io *readcmd; | 
|  | aac_fib_init(fib); | 
|  | readcmd = (struct aac_raw_io *) fib_data(fib); | 
|  | readcmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff)); | 
|  | readcmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32)); | 
|  | readcmd->count = cpu_to_le32(count<<9); | 
|  | readcmd->cid = cpu_to_le16(scmd_id(cmd)); | 
|  | readcmd->flags = cpu_to_le16(IO_TYPE_READ); | 
|  | readcmd->bpTotal = 0; | 
|  | readcmd->bpComplete = 0; | 
|  |  | 
|  | aac_build_sgraw(cmd, &readcmd->sg); | 
|  | fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(readcmd->sg.count) - 1) * sizeof (struct sgentryraw)); | 
|  | BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr))); | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | return aac_fib_send(ContainerRawIo, | 
|  | fib, | 
|  | fibsize, | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) io_callback, | 
|  | (void *) cmd); | 
|  | } | 
|  |  | 
|  | static int aac_read_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count) | 
|  | { | 
|  | u16 fibsize; | 
|  | struct aac_read64 *readcmd; | 
|  | aac_fib_init(fib); | 
|  | readcmd = (struct aac_read64 *) fib_data(fib); | 
|  | readcmd->command = cpu_to_le32(VM_CtHostRead64); | 
|  | readcmd->cid = cpu_to_le16(scmd_id(cmd)); | 
|  | readcmd->sector_count = cpu_to_le16(count); | 
|  | readcmd->block = cpu_to_le32((u32)(lba&0xffffffff)); | 
|  | readcmd->pad   = 0; | 
|  | readcmd->flags = 0; | 
|  |  | 
|  | aac_build_sg64(cmd, &readcmd->sg); | 
|  | fibsize = sizeof(struct aac_read64) + | 
|  | ((le32_to_cpu(readcmd->sg.count) - 1) * | 
|  | sizeof (struct sgentry64)); | 
|  | BUG_ON (fibsize > (fib->dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr))); | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | return aac_fib_send(ContainerCommand64, | 
|  | fib, | 
|  | fibsize, | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) io_callback, | 
|  | (void *) cmd); | 
|  | } | 
|  |  | 
|  | static int aac_read_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count) | 
|  | { | 
|  | u16 fibsize; | 
|  | struct aac_read *readcmd; | 
|  | aac_fib_init(fib); | 
|  | readcmd = (struct aac_read *) fib_data(fib); | 
|  | readcmd->command = cpu_to_le32(VM_CtBlockRead); | 
|  | readcmd->cid = cpu_to_le32(scmd_id(cmd)); | 
|  | readcmd->block = cpu_to_le32((u32)(lba&0xffffffff)); | 
|  | readcmd->count = cpu_to_le32(count * 512); | 
|  |  | 
|  | aac_build_sg(cmd, &readcmd->sg); | 
|  | fibsize = sizeof(struct aac_read) + | 
|  | ((le32_to_cpu(readcmd->sg.count) - 1) * | 
|  | sizeof (struct sgentry)); | 
|  | BUG_ON (fibsize > (fib->dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr))); | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | return aac_fib_send(ContainerCommand, | 
|  | fib, | 
|  | fibsize, | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) io_callback, | 
|  | (void *) cmd); | 
|  | } | 
|  |  | 
|  | static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua) | 
|  | { | 
|  | u16 fibsize; | 
|  | struct aac_raw_io *writecmd; | 
|  | aac_fib_init(fib); | 
|  | writecmd = (struct aac_raw_io *) fib_data(fib); | 
|  | writecmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff)); | 
|  | writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32)); | 
|  | writecmd->count = cpu_to_le32(count<<9); | 
|  | writecmd->cid = cpu_to_le16(scmd_id(cmd)); | 
|  | writecmd->flags = (fua && ((aac_cache & 5) != 1) && | 
|  | (((aac_cache & 5) != 5) || !fib->dev->cache_protected)) ? | 
|  | cpu_to_le16(IO_TYPE_WRITE|IO_SUREWRITE) : | 
|  | cpu_to_le16(IO_TYPE_WRITE); | 
|  | writecmd->bpTotal = 0; | 
|  | writecmd->bpComplete = 0; | 
|  |  | 
|  | aac_build_sgraw(cmd, &writecmd->sg); | 
|  | fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(writecmd->sg.count) - 1) * sizeof (struct sgentryraw)); | 
|  | BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr))); | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | return aac_fib_send(ContainerRawIo, | 
|  | fib, | 
|  | fibsize, | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) io_callback, | 
|  | (void *) cmd); | 
|  | } | 
|  |  | 
|  | static int aac_write_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua) | 
|  | { | 
|  | u16 fibsize; | 
|  | struct aac_write64 *writecmd; | 
|  | aac_fib_init(fib); | 
|  | writecmd = (struct aac_write64 *) fib_data(fib); | 
|  | writecmd->command = cpu_to_le32(VM_CtHostWrite64); | 
|  | writecmd->cid = cpu_to_le16(scmd_id(cmd)); | 
|  | writecmd->sector_count = cpu_to_le16(count); | 
|  | writecmd->block = cpu_to_le32((u32)(lba&0xffffffff)); | 
|  | writecmd->pad	= 0; | 
|  | writecmd->flags	= 0; | 
|  |  | 
|  | aac_build_sg64(cmd, &writecmd->sg); | 
|  | fibsize = sizeof(struct aac_write64) + | 
|  | ((le32_to_cpu(writecmd->sg.count) - 1) * | 
|  | sizeof (struct sgentry64)); | 
|  | BUG_ON (fibsize > (fib->dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr))); | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | return aac_fib_send(ContainerCommand64, | 
|  | fib, | 
|  | fibsize, | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) io_callback, | 
|  | (void *) cmd); | 
|  | } | 
|  |  | 
|  | static int aac_write_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua) | 
|  | { | 
|  | u16 fibsize; | 
|  | struct aac_write *writecmd; | 
|  | aac_fib_init(fib); | 
|  | writecmd = (struct aac_write *) fib_data(fib); | 
|  | writecmd->command = cpu_to_le32(VM_CtBlockWrite); | 
|  | writecmd->cid = cpu_to_le32(scmd_id(cmd)); | 
|  | writecmd->block = cpu_to_le32((u32)(lba&0xffffffff)); | 
|  | writecmd->count = cpu_to_le32(count * 512); | 
|  | writecmd->sg.count = cpu_to_le32(1); | 
|  | /* ->stable is not used - it did mean which type of write */ | 
|  |  | 
|  | aac_build_sg(cmd, &writecmd->sg); | 
|  | fibsize = sizeof(struct aac_write) + | 
|  | ((le32_to_cpu(writecmd->sg.count) - 1) * | 
|  | sizeof (struct sgentry)); | 
|  | BUG_ON (fibsize > (fib->dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr))); | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | return aac_fib_send(ContainerCommand, | 
|  | fib, | 
|  | fibsize, | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback) io_callback, | 
|  | (void *) cmd); | 
|  | } | 
|  |  | 
|  | static struct aac_srb * aac_scsi_common(struct fib * fib, struct scsi_cmnd * cmd) | 
|  | { | 
|  | struct aac_srb * srbcmd; | 
|  | u32 flag; | 
|  | u32 timeout; | 
|  |  | 
|  | aac_fib_init(fib); | 
|  | switch(cmd->sc_data_direction){ | 
|  | case DMA_TO_DEVICE: | 
|  | flag = SRB_DataOut; | 
|  | break; | 
|  | case DMA_BIDIRECTIONAL: | 
|  | flag = SRB_DataIn | SRB_DataOut; | 
|  | break; | 
|  | case DMA_FROM_DEVICE: | 
|  | flag = SRB_DataIn; | 
|  | break; | 
|  | case DMA_NONE: | 
|  | default:	/* shuts up some versions of gcc */ | 
|  | flag = SRB_NoDataXfer; | 
|  | break; | 
|  | } | 
|  |  | 
|  | srbcmd = (struct aac_srb*) fib_data(fib); | 
|  | srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi); | 
|  | srbcmd->channel  = cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd))); | 
|  | srbcmd->id       = cpu_to_le32(scmd_id(cmd)); | 
|  | srbcmd->lun      = cpu_to_le32(cmd->device->lun); | 
|  | srbcmd->flags    = cpu_to_le32(flag); | 
|  | timeout = cmd->request->timeout/HZ; | 
|  | if (timeout == 0) | 
|  | timeout = 1; | 
|  | srbcmd->timeout  = cpu_to_le32(timeout);  // timeout in seconds | 
|  | srbcmd->retry_limit = 0; /* Obsolete parameter */ | 
|  | srbcmd->cdb_size = cpu_to_le32(cmd->cmd_len); | 
|  | return srbcmd; | 
|  | } | 
|  |  | 
|  | static void aac_srb_callback(void *context, struct fib * fibptr); | 
|  |  | 
|  | static int aac_scsi_64(struct fib * fib, struct scsi_cmnd * cmd) | 
|  | { | 
|  | u16 fibsize; | 
|  | struct aac_srb * srbcmd = aac_scsi_common(fib, cmd); | 
|  |  | 
|  | aac_build_sg64(cmd, (struct sgmap64*) &srbcmd->sg); | 
|  | srbcmd->count = cpu_to_le32(scsi_bufflen(cmd)); | 
|  |  | 
|  | memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb)); | 
|  | memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len); | 
|  | /* | 
|  | *	Build Scatter/Gather list | 
|  | */ | 
|  | fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) + | 
|  | ((le32_to_cpu(srbcmd->sg.count) & 0xff) * | 
|  | sizeof (struct sgentry64)); | 
|  | BUG_ON (fibsize > (fib->dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr))); | 
|  |  | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | return aac_fib_send(ScsiPortCommand64, fib, | 
|  | fibsize, FsaNormal, 0, 1, | 
|  | (fib_callback) aac_srb_callback, | 
|  | (void *) cmd); | 
|  | } | 
|  |  | 
|  | static int aac_scsi_32(struct fib * fib, struct scsi_cmnd * cmd) | 
|  | { | 
|  | u16 fibsize; | 
|  | struct aac_srb * srbcmd = aac_scsi_common(fib, cmd); | 
|  |  | 
|  | aac_build_sg(cmd, (struct sgmap*)&srbcmd->sg); | 
|  | srbcmd->count = cpu_to_le32(scsi_bufflen(cmd)); | 
|  |  | 
|  | memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb)); | 
|  | memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len); | 
|  | /* | 
|  | *	Build Scatter/Gather list | 
|  | */ | 
|  | fibsize = sizeof (struct aac_srb) + | 
|  | (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) * | 
|  | sizeof (struct sgentry)); | 
|  | BUG_ON (fibsize > (fib->dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr))); | 
|  |  | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | return aac_fib_send(ScsiPortCommand, fib, fibsize, FsaNormal, 0, 1, | 
|  | (fib_callback) aac_srb_callback, (void *) cmd); | 
|  | } | 
|  |  | 
|  | static int aac_scsi_32_64(struct fib * fib, struct scsi_cmnd * cmd) | 
|  | { | 
|  | if ((sizeof(dma_addr_t) > 4) && fib->dev->needs_dac && | 
|  | (fib->dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)) | 
|  | return FAILED; | 
|  | return aac_scsi_32(fib, cmd); | 
|  | } | 
|  |  | 
|  | int aac_get_adapter_info(struct aac_dev* dev) | 
|  | { | 
|  | struct fib* fibptr; | 
|  | int rcode; | 
|  | u32 tmp; | 
|  | struct aac_adapter_info *info; | 
|  | struct aac_bus_info *command; | 
|  | struct aac_bus_info_response *bus_info; | 
|  |  | 
|  | if (!(fibptr = aac_fib_alloc(dev))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  | info = (struct aac_adapter_info *) fib_data(fibptr); | 
|  | memset(info,0,sizeof(*info)); | 
|  |  | 
|  | rcode = aac_fib_send(RequestAdapterInfo, | 
|  | fibptr, | 
|  | sizeof(*info), | 
|  | FsaNormal, | 
|  | -1, 1, /* First `interrupt' command uses special wait */ | 
|  | NULL, | 
|  | NULL); | 
|  |  | 
|  | if (rcode < 0) { | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | return rcode; | 
|  | } | 
|  | memcpy(&dev->adapter_info, info, sizeof(*info)); | 
|  |  | 
|  | if (dev->adapter_info.options & AAC_OPT_SUPPLEMENT_ADAPTER_INFO) { | 
|  | struct aac_supplement_adapter_info * sinfo; | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  |  | 
|  | sinfo = (struct aac_supplement_adapter_info *) fib_data(fibptr); | 
|  |  | 
|  | memset(sinfo,0,sizeof(*sinfo)); | 
|  |  | 
|  | rcode = aac_fib_send(RequestSupplementAdapterInfo, | 
|  | fibptr, | 
|  | sizeof(*sinfo), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, | 
|  | NULL); | 
|  |  | 
|  | if (rcode >= 0) | 
|  | memcpy(&dev->supplement_adapter_info, sinfo, sizeof(*sinfo)); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * GetBusInfo | 
|  | */ | 
|  |  | 
|  | aac_fib_init(fibptr); | 
|  |  | 
|  | bus_info = (struct aac_bus_info_response *) fib_data(fibptr); | 
|  |  | 
|  | memset(bus_info, 0, sizeof(*bus_info)); | 
|  |  | 
|  | command = (struct aac_bus_info *)bus_info; | 
|  |  | 
|  | command->Command = cpu_to_le32(VM_Ioctl); | 
|  | command->ObjType = cpu_to_le32(FT_DRIVE); | 
|  | command->MethodId = cpu_to_le32(1); | 
|  | command->CtlCmd = cpu_to_le32(GetBusInfo); | 
|  |  | 
|  | rcode = aac_fib_send(ContainerCommand, | 
|  | fibptr, | 
|  | sizeof (*bus_info), | 
|  | FsaNormal, | 
|  | 1, 1, | 
|  | NULL, NULL); | 
|  |  | 
|  | /* reasoned default */ | 
|  | dev->maximum_num_physicals = 16; | 
|  | if (rcode >= 0 && le32_to_cpu(bus_info->Status) == ST_OK) { | 
|  | dev->maximum_num_physicals = le32_to_cpu(bus_info->TargetsPerBus); | 
|  | dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount); | 
|  | } | 
|  |  | 
|  | if (!dev->in_reset) { | 
|  | char buffer[16]; | 
|  | tmp = le32_to_cpu(dev->adapter_info.kernelrev); | 
|  | printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n", | 
|  | dev->name, | 
|  | dev->id, | 
|  | tmp>>24, | 
|  | (tmp>>16)&0xff, | 
|  | tmp&0xff, | 
|  | le32_to_cpu(dev->adapter_info.kernelbuild), | 
|  | (int)sizeof(dev->supplement_adapter_info.BuildDate), | 
|  | dev->supplement_adapter_info.BuildDate); | 
|  | tmp = le32_to_cpu(dev->adapter_info.monitorrev); | 
|  | printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n", | 
|  | dev->name, dev->id, | 
|  | tmp>>24,(tmp>>16)&0xff,tmp&0xff, | 
|  | le32_to_cpu(dev->adapter_info.monitorbuild)); | 
|  | tmp = le32_to_cpu(dev->adapter_info.biosrev); | 
|  | printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n", | 
|  | dev->name, dev->id, | 
|  | tmp>>24,(tmp>>16)&0xff,tmp&0xff, | 
|  | le32_to_cpu(dev->adapter_info.biosbuild)); | 
|  | buffer[0] = '\0'; | 
|  | if (aac_get_serial_number( | 
|  | shost_to_class(dev->scsi_host_ptr), buffer)) | 
|  | printk(KERN_INFO "%s%d: serial %s", | 
|  | dev->name, dev->id, buffer); | 
|  | if (dev->supplement_adapter_info.VpdInfo.Tsid[0]) { | 
|  | printk(KERN_INFO "%s%d: TSID %.*s\n", | 
|  | dev->name, dev->id, | 
|  | (int)sizeof(dev->supplement_adapter_info.VpdInfo.Tsid), | 
|  | dev->supplement_adapter_info.VpdInfo.Tsid); | 
|  | } | 
|  | if (!aac_check_reset || ((aac_check_reset == 1) && | 
|  | (dev->supplement_adapter_info.SupportedOptions2 & | 
|  | AAC_OPTION_IGNORE_RESET))) { | 
|  | printk(KERN_INFO "%s%d: Reset Adapter Ignored\n", | 
|  | dev->name, dev->id); | 
|  | } | 
|  | } | 
|  |  | 
|  | dev->cache_protected = 0; | 
|  | dev->jbod = ((dev->supplement_adapter_info.FeatureBits & | 
|  | AAC_FEATURE_JBOD) != 0); | 
|  | dev->nondasd_support = 0; | 
|  | dev->raid_scsi_mode = 0; | 
|  | if(dev->adapter_info.options & AAC_OPT_NONDASD) | 
|  | dev->nondasd_support = 1; | 
|  |  | 
|  | /* | 
|  | * If the firmware supports ROMB RAID/SCSI mode and we are currently | 
|  | * in RAID/SCSI mode, set the flag. For now if in this mode we will | 
|  | * force nondasd support on. If we decide to allow the non-dasd flag | 
|  | * additional changes changes will have to be made to support | 
|  | * RAID/SCSI.  the function aac_scsi_cmd in this module will have to be | 
|  | * changed to support the new dev->raid_scsi_mode flag instead of | 
|  | * leaching off of the dev->nondasd_support flag. Also in linit.c the | 
|  | * function aac_detect will have to be modified where it sets up the | 
|  | * max number of channels based on the aac->nondasd_support flag only. | 
|  | */ | 
|  | if ((dev->adapter_info.options & AAC_OPT_SCSI_MANAGED) && | 
|  | (dev->adapter_info.options & AAC_OPT_RAID_SCSI_MODE)) { | 
|  | dev->nondasd_support = 1; | 
|  | dev->raid_scsi_mode = 1; | 
|  | } | 
|  | if (dev->raid_scsi_mode != 0) | 
|  | printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n", | 
|  | dev->name, dev->id); | 
|  |  | 
|  | if (nondasd != -1) | 
|  | dev->nondasd_support = (nondasd!=0); | 
|  | if (dev->nondasd_support && !dev->in_reset) | 
|  | printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id); | 
|  |  | 
|  | if (dma_get_required_mask(&dev->pdev->dev) > DMA_BIT_MASK(32)) | 
|  | dev->needs_dac = 1; | 
|  | dev->dac_support = 0; | 
|  | if ((sizeof(dma_addr_t) > 4) && dev->needs_dac && | 
|  | (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)) { | 
|  | if (!dev->in_reset) | 
|  | printk(KERN_INFO "%s%d: 64bit support enabled.\n", | 
|  | dev->name, dev->id); | 
|  | dev->dac_support = 1; | 
|  | } | 
|  |  | 
|  | if(dacmode != -1) { | 
|  | dev->dac_support = (dacmode!=0); | 
|  | } | 
|  |  | 
|  | /* avoid problems with AAC_QUIRK_SCSI_32 controllers */ | 
|  | if (dev->dac_support &&	(aac_get_driver_ident(dev->cardtype)->quirks | 
|  | & AAC_QUIRK_SCSI_32)) { | 
|  | dev->nondasd_support = 0; | 
|  | dev->jbod = 0; | 
|  | expose_physicals = 0; | 
|  | } | 
|  |  | 
|  | if(dev->dac_support != 0) { | 
|  | if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(64)) && | 
|  | !pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(64))) { | 
|  | if (!dev->in_reset) | 
|  | printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n", | 
|  | dev->name, dev->id); | 
|  | } else if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(32)) && | 
|  | !pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(32))) { | 
|  | printk(KERN_INFO"%s%d: DMA mask set failed, 64 Bit DAC disabled\n", | 
|  | dev->name, dev->id); | 
|  | dev->dac_support = 0; | 
|  | } else { | 
|  | printk(KERN_WARNING"%s%d: No suitable DMA available.\n", | 
|  | dev->name, dev->id); | 
|  | rcode = -ENOMEM; | 
|  | } | 
|  | } | 
|  | /* | 
|  | * Deal with configuring for the individualized limits of each packet | 
|  | * interface. | 
|  | */ | 
|  | dev->a_ops.adapter_scsi = (dev->dac_support) | 
|  | ? ((aac_get_driver_ident(dev->cardtype)->quirks & AAC_QUIRK_SCSI_32) | 
|  | ? aac_scsi_32_64 | 
|  | : aac_scsi_64) | 
|  | : aac_scsi_32; | 
|  | if (dev->raw_io_interface) { | 
|  | dev->a_ops.adapter_bounds = (dev->raw_io_64) | 
|  | ? aac_bounds_64 | 
|  | : aac_bounds_32; | 
|  | dev->a_ops.adapter_read = aac_read_raw_io; | 
|  | dev->a_ops.adapter_write = aac_write_raw_io; | 
|  | } else { | 
|  | dev->a_ops.adapter_bounds = aac_bounds_32; | 
|  | dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr) - | 
|  | sizeof(struct aac_write) + sizeof(struct sgentry)) / | 
|  | sizeof(struct sgentry); | 
|  | if (dev->dac_support) { | 
|  | dev->a_ops.adapter_read = aac_read_block64; | 
|  | dev->a_ops.adapter_write = aac_write_block64; | 
|  | /* | 
|  | * 38 scatter gather elements | 
|  | */ | 
|  | dev->scsi_host_ptr->sg_tablesize = | 
|  | (dev->max_fib_size - | 
|  | sizeof(struct aac_fibhdr) - | 
|  | sizeof(struct aac_write64) + | 
|  | sizeof(struct sgentry64)) / | 
|  | sizeof(struct sgentry64); | 
|  | } else { | 
|  | dev->a_ops.adapter_read = aac_read_block; | 
|  | dev->a_ops.adapter_write = aac_write_block; | 
|  | } | 
|  | dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT; | 
|  | if(!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) { | 
|  | /* | 
|  | * Worst case size that could cause sg overflow when | 
|  | * we break up SG elements that are larger than 64KB. | 
|  | * Would be nice if we could tell the SCSI layer what | 
|  | * the maximum SG element size can be. Worst case is | 
|  | * (sg_tablesize-1) 4KB elements with one 64KB | 
|  | * element. | 
|  | *	32bit -> 468 or 238KB	64bit -> 424 or 212KB | 
|  | */ | 
|  | dev->scsi_host_ptr->max_sectors = | 
|  | (dev->scsi_host_ptr->sg_tablesize * 8) + 112; | 
|  | } | 
|  | } | 
|  |  | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  |  | 
|  | return rcode; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void io_callback(void *context, struct fib * fibptr) | 
|  | { | 
|  | struct aac_dev *dev; | 
|  | struct aac_read_reply *readreply; | 
|  | struct scsi_cmnd *scsicmd; | 
|  | u32 cid; | 
|  |  | 
|  | scsicmd = (struct scsi_cmnd *) context; | 
|  |  | 
|  | if (!aac_valid_context(scsicmd, fibptr)) | 
|  | return; | 
|  |  | 
|  | dev = fibptr->dev; | 
|  | cid = scmd_id(scsicmd); | 
|  |  | 
|  | if (nblank(dprintk(x))) { | 
|  | u64 lba; | 
|  | switch (scsicmd->cmnd[0]) { | 
|  | case WRITE_6: | 
|  | case READ_6: | 
|  | lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | | 
|  | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; | 
|  | break; | 
|  | case WRITE_16: | 
|  | case READ_16: | 
|  | lba = ((u64)scsicmd->cmnd[2] << 56) | | 
|  | ((u64)scsicmd->cmnd[3] << 48) | | 
|  | ((u64)scsicmd->cmnd[4] << 40) | | 
|  | ((u64)scsicmd->cmnd[5] << 32) | | 
|  | ((u64)scsicmd->cmnd[6] << 24) | | 
|  | (scsicmd->cmnd[7] << 16) | | 
|  | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | 
|  | break; | 
|  | case WRITE_12: | 
|  | case READ_12: | 
|  | lba = ((u64)scsicmd->cmnd[2] << 24) | | 
|  | (scsicmd->cmnd[3] << 16) | | 
|  | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | break; | 
|  | default: | 
|  | lba = ((u64)scsicmd->cmnd[2] << 24) | | 
|  | (scsicmd->cmnd[3] << 16) | | 
|  | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | break; | 
|  | } | 
|  | printk(KERN_DEBUG | 
|  | "io_callback[cpu %d]: lba = %llu, t = %ld.\n", | 
|  | smp_processor_id(), (unsigned long long)lba, jiffies); | 
|  | } | 
|  |  | 
|  | BUG_ON(fibptr == NULL); | 
|  |  | 
|  | scsi_dma_unmap(scsicmd); | 
|  |  | 
|  | readreply = (struct aac_read_reply *)fib_data(fibptr); | 
|  | switch (le32_to_cpu(readreply->status)) { | 
|  | case ST_OK: | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | | 
|  | SAM_STAT_GOOD; | 
|  | dev->fsa_dev[cid].sense_data.sense_key = NO_SENSE; | 
|  | break; | 
|  | case ST_NOT_READY: | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | | 
|  | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense(&dev->fsa_dev[cid].sense_data, NOT_READY, | 
|  | SENCODE_BECOMING_READY, ASENCODE_BECOMING_READY, 0, 0); | 
|  | memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | 
|  | min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), | 
|  | SCSI_SENSE_BUFFERSIZE)); | 
|  | break; | 
|  | default: | 
|  | #ifdef AAC_DETAILED_STATUS_INFO | 
|  | printk(KERN_WARNING "io_callback: io failed, status = %d\n", | 
|  | le32_to_cpu(readreply->status)); | 
|  | #endif | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | | 
|  | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense(&dev->fsa_dev[cid].sense_data, | 
|  | HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE, | 
|  | ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0); | 
|  | memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | 
|  | min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), | 
|  | SCSI_SENSE_BUFFERSIZE)); | 
|  | break; | 
|  | } | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  |  | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | } | 
|  |  | 
|  | static int aac_read(struct scsi_cmnd * scsicmd) | 
|  | { | 
|  | u64 lba; | 
|  | u32 count; | 
|  | int status; | 
|  | struct aac_dev *dev; | 
|  | struct fib * cmd_fibcontext; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  | /* | 
|  | *	Get block address and transfer length | 
|  | */ | 
|  | switch (scsicmd->cmnd[0]) { | 
|  | case READ_6: | 
|  | dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd))); | 
|  |  | 
|  | lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | | 
|  | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; | 
|  | count = scsicmd->cmnd[4]; | 
|  |  | 
|  | if (count == 0) | 
|  | count = 256; | 
|  | break; | 
|  | case READ_16: | 
|  | dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd))); | 
|  |  | 
|  | lba =	((u64)scsicmd->cmnd[2] << 56) | | 
|  | ((u64)scsicmd->cmnd[3] << 48) | | 
|  | ((u64)scsicmd->cmnd[4] << 40) | | 
|  | ((u64)scsicmd->cmnd[5] << 32) | | 
|  | ((u64)scsicmd->cmnd[6] << 24) | | 
|  | (scsicmd->cmnd[7] << 16) | | 
|  | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | 
|  | count = (scsicmd->cmnd[10] << 24) | | 
|  | (scsicmd->cmnd[11] << 16) | | 
|  | (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13]; | 
|  | break; | 
|  | case READ_12: | 
|  | dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd))); | 
|  |  | 
|  | lba = ((u64)scsicmd->cmnd[2] << 24) | | 
|  | (scsicmd->cmnd[3] << 16) | | 
|  | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | count = (scsicmd->cmnd[6] << 24) | | 
|  | (scsicmd->cmnd[7] << 16) | | 
|  | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | 
|  | break; | 
|  | default: | 
|  | dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd))); | 
|  |  | 
|  | lba = ((u64)scsicmd->cmnd[2] << 24) | | 
|  | (scsicmd->cmnd[3] << 16) | | 
|  | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; | 
|  | break; | 
|  | } | 
|  | dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n", | 
|  | smp_processor_id(), (unsigned long long)lba, jiffies)); | 
|  | if (aac_adapter_bounds(dev,scsicmd,lba)) | 
|  | return 0; | 
|  | /* | 
|  | *	Alocate and initialize a Fib | 
|  | */ | 
|  | if (!(cmd_fibcontext = aac_fib_alloc(dev))) { | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | status = aac_adapter_read(cmd_fibcontext, scsicmd, lba, count); | 
|  |  | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_WARNING "aac_read: aac_fib_send failed with status: %d.\n", status); | 
|  | /* | 
|  | *	For some reason, the Fib didn't queue, return QUEUE_FULL | 
|  | */ | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | aac_fib_complete(cmd_fibcontext); | 
|  | aac_fib_free(cmd_fibcontext); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int aac_write(struct scsi_cmnd * scsicmd) | 
|  | { | 
|  | u64 lba; | 
|  | u32 count; | 
|  | int fua; | 
|  | int status; | 
|  | struct aac_dev *dev; | 
|  | struct fib * cmd_fibcontext; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  | /* | 
|  | *	Get block address and transfer length | 
|  | */ | 
|  | if (scsicmd->cmnd[0] == WRITE_6)	/* 6 byte command */ | 
|  | { | 
|  | lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; | 
|  | count = scsicmd->cmnd[4]; | 
|  | if (count == 0) | 
|  | count = 256; | 
|  | fua = 0; | 
|  | } else if (scsicmd->cmnd[0] == WRITE_16) { /* 16 byte command */ | 
|  | dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd))); | 
|  |  | 
|  | lba =	((u64)scsicmd->cmnd[2] << 56) | | 
|  | ((u64)scsicmd->cmnd[3] << 48) | | 
|  | ((u64)scsicmd->cmnd[4] << 40) | | 
|  | ((u64)scsicmd->cmnd[5] << 32) | | 
|  | ((u64)scsicmd->cmnd[6] << 24) | | 
|  | (scsicmd->cmnd[7] << 16) | | 
|  | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | 
|  | count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) | | 
|  | (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13]; | 
|  | fua = scsicmd->cmnd[1] & 0x8; | 
|  | } else if (scsicmd->cmnd[0] == WRITE_12) { /* 12 byte command */ | 
|  | dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd))); | 
|  |  | 
|  | lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | 
|  | | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | count = (scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16) | 
|  | | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | 
|  | fua = scsicmd->cmnd[1] & 0x8; | 
|  | } else { | 
|  | dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd))); | 
|  | lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; | 
|  | fua = scsicmd->cmnd[1] & 0x8; | 
|  | } | 
|  | dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n", | 
|  | smp_processor_id(), (unsigned long long)lba, jiffies)); | 
|  | if (aac_adapter_bounds(dev,scsicmd,lba)) | 
|  | return 0; | 
|  | /* | 
|  | *	Allocate and initialize a Fib then setup a BlockWrite command | 
|  | */ | 
|  | if (!(cmd_fibcontext = aac_fib_alloc(dev))) { | 
|  | scsicmd->result = DID_ERROR << 16; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua); | 
|  |  | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_WARNING "aac_write: aac_fib_send failed with status: %d\n", status); | 
|  | /* | 
|  | *	For some reason, the Fib didn't queue, return QUEUE_FULL | 
|  | */ | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  |  | 
|  | aac_fib_complete(cmd_fibcontext); | 
|  | aac_fib_free(cmd_fibcontext); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void synchronize_callback(void *context, struct fib *fibptr) | 
|  | { | 
|  | struct aac_synchronize_reply *synchronizereply; | 
|  | struct scsi_cmnd *cmd; | 
|  |  | 
|  | cmd = context; | 
|  |  | 
|  | if (!aac_valid_context(cmd, fibptr)) | 
|  | return; | 
|  |  | 
|  | dprintk((KERN_DEBUG "synchronize_callback[cpu %d]: t = %ld.\n", | 
|  | smp_processor_id(), jiffies)); | 
|  | BUG_ON(fibptr == NULL); | 
|  |  | 
|  |  | 
|  | synchronizereply = fib_data(fibptr); | 
|  | if (le32_to_cpu(synchronizereply->status) == CT_OK) | 
|  | cmd->result = DID_OK << 16 | | 
|  | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | else { | 
|  | struct scsi_device *sdev = cmd->device; | 
|  | struct aac_dev *dev = fibptr->dev; | 
|  | u32 cid = sdev_id(sdev); | 
|  | printk(KERN_WARNING | 
|  | "synchronize_callback: synchronize failed, status = %d\n", | 
|  | le32_to_cpu(synchronizereply->status)); | 
|  | cmd->result = DID_OK << 16 | | 
|  | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense(&dev->fsa_dev[cid].sense_data, | 
|  | HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE, | 
|  | ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0); | 
|  | memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | 
|  | min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), | 
|  | SCSI_SENSE_BUFFERSIZE)); | 
|  | } | 
|  |  | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | cmd->scsi_done(cmd); | 
|  | } | 
|  |  | 
|  | static int aac_synchronize(struct scsi_cmnd *scsicmd) | 
|  | { | 
|  | int status; | 
|  | struct fib *cmd_fibcontext; | 
|  | struct aac_synchronize *synchronizecmd; | 
|  | struct scsi_cmnd *cmd; | 
|  | struct scsi_device *sdev = scsicmd->device; | 
|  | int active = 0; | 
|  | struct aac_dev *aac; | 
|  | u64 lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | | 
|  | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | 
|  | u32 count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* | 
|  | * Wait for all outstanding queued commands to complete to this | 
|  | * specific target (block). | 
|  | */ | 
|  | spin_lock_irqsave(&sdev->list_lock, flags); | 
|  | list_for_each_entry(cmd, &sdev->cmd_list, list) | 
|  | if (cmd->SCp.phase == AAC_OWNER_FIRMWARE) { | 
|  | u64 cmnd_lba; | 
|  | u32 cmnd_count; | 
|  |  | 
|  | if (cmd->cmnd[0] == WRITE_6) { | 
|  | cmnd_lba = ((cmd->cmnd[1] & 0x1F) << 16) | | 
|  | (cmd->cmnd[2] << 8) | | 
|  | cmd->cmnd[3]; | 
|  | cmnd_count = cmd->cmnd[4]; | 
|  | if (cmnd_count == 0) | 
|  | cmnd_count = 256; | 
|  | } else if (cmd->cmnd[0] == WRITE_16) { | 
|  | cmnd_lba = ((u64)cmd->cmnd[2] << 56) | | 
|  | ((u64)cmd->cmnd[3] << 48) | | 
|  | ((u64)cmd->cmnd[4] << 40) | | 
|  | ((u64)cmd->cmnd[5] << 32) | | 
|  | ((u64)cmd->cmnd[6] << 24) | | 
|  | (cmd->cmnd[7] << 16) | | 
|  | (cmd->cmnd[8] << 8) | | 
|  | cmd->cmnd[9]; | 
|  | cmnd_count = (cmd->cmnd[10] << 24) | | 
|  | (cmd->cmnd[11] << 16) | | 
|  | (cmd->cmnd[12] << 8) | | 
|  | cmd->cmnd[13]; | 
|  | } else if (cmd->cmnd[0] == WRITE_12) { | 
|  | cmnd_lba = ((u64)cmd->cmnd[2] << 24) | | 
|  | (cmd->cmnd[3] << 16) | | 
|  | (cmd->cmnd[4] << 8) | | 
|  | cmd->cmnd[5]; | 
|  | cmnd_count = (cmd->cmnd[6] << 24) | | 
|  | (cmd->cmnd[7] << 16) | | 
|  | (cmd->cmnd[8] << 8) | | 
|  | cmd->cmnd[9]; | 
|  | } else if (cmd->cmnd[0] == WRITE_10) { | 
|  | cmnd_lba = ((u64)cmd->cmnd[2] << 24) | | 
|  | (cmd->cmnd[3] << 16) | | 
|  | (cmd->cmnd[4] << 8) | | 
|  | cmd->cmnd[5]; | 
|  | cmnd_count = (cmd->cmnd[7] << 8) | | 
|  | cmd->cmnd[8]; | 
|  | } else | 
|  | continue; | 
|  | if (((cmnd_lba + cmnd_count) < lba) || | 
|  | (count && ((lba + count) < cmnd_lba))) | 
|  | continue; | 
|  | ++active; | 
|  | break; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&sdev->list_lock, flags); | 
|  |  | 
|  | /* | 
|  | *	Yield the processor (requeue for later) | 
|  | */ | 
|  | if (active) | 
|  | return SCSI_MLQUEUE_DEVICE_BUSY; | 
|  |  | 
|  | aac = (struct aac_dev *)sdev->host->hostdata; | 
|  | if (aac->in_reset) | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  |  | 
|  | /* | 
|  | *	Allocate and initialize a Fib | 
|  | */ | 
|  | if (!(cmd_fibcontext = aac_fib_alloc(aac))) | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  |  | 
|  | aac_fib_init(cmd_fibcontext); | 
|  |  | 
|  | synchronizecmd = fib_data(cmd_fibcontext); | 
|  | synchronizecmd->command = cpu_to_le32(VM_ContainerConfig); | 
|  | synchronizecmd->type = cpu_to_le32(CT_FLUSH_CACHE); | 
|  | synchronizecmd->cid = cpu_to_le32(scmd_id(scsicmd)); | 
|  | synchronizecmd->count = | 
|  | cpu_to_le32(sizeof(((struct aac_synchronize_reply *)NULL)->data)); | 
|  |  | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | cmd_fibcontext, | 
|  | sizeof(struct aac_synchronize), | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback)synchronize_callback, | 
|  | (void *)scsicmd); | 
|  |  | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_WARNING | 
|  | "aac_synchronize: aac_fib_send failed with status: %d.\n", status); | 
|  | aac_fib_complete(cmd_fibcontext); | 
|  | aac_fib_free(cmd_fibcontext); | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  | } | 
|  |  | 
|  | static void aac_start_stop_callback(void *context, struct fib *fibptr) | 
|  | { | 
|  | struct scsi_cmnd *scsicmd = context; | 
|  |  | 
|  | if (!aac_valid_context(scsicmd, fibptr)) | 
|  | return; | 
|  |  | 
|  | BUG_ON(fibptr == NULL); | 
|  |  | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  |  | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | } | 
|  |  | 
|  | static int aac_start_stop(struct scsi_cmnd *scsicmd) | 
|  | { | 
|  | int status; | 
|  | struct fib *cmd_fibcontext; | 
|  | struct aac_power_management *pmcmd; | 
|  | struct scsi_device *sdev = scsicmd->device; | 
|  | struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata; | 
|  |  | 
|  | if (!(aac->supplement_adapter_info.SupportedOptions2 & | 
|  | AAC_OPTION_POWER_MANAGEMENT)) { | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | | 
|  | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (aac->in_reset) | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  |  | 
|  | /* | 
|  | *	Allocate and initialize a Fib | 
|  | */ | 
|  | cmd_fibcontext = aac_fib_alloc(aac); | 
|  | if (!cmd_fibcontext) | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  |  | 
|  | aac_fib_init(cmd_fibcontext); | 
|  |  | 
|  | pmcmd = fib_data(cmd_fibcontext); | 
|  | pmcmd->command = cpu_to_le32(VM_ContainerConfig); | 
|  | pmcmd->type = cpu_to_le32(CT_POWER_MANAGEMENT); | 
|  | /* Eject bit ignored, not relevant */ | 
|  | pmcmd->sub = (scsicmd->cmnd[4] & 1) ? | 
|  | cpu_to_le32(CT_PM_START_UNIT) : cpu_to_le32(CT_PM_STOP_UNIT); | 
|  | pmcmd->cid = cpu_to_le32(sdev_id(sdev)); | 
|  | pmcmd->parm = (scsicmd->cmnd[1] & 1) ? | 
|  | cpu_to_le32(CT_PM_UNIT_IMMEDIATE) : 0; | 
|  |  | 
|  | /* | 
|  | *	Now send the Fib to the adapter | 
|  | */ | 
|  | status = aac_fib_send(ContainerCommand, | 
|  | cmd_fibcontext, | 
|  | sizeof(struct aac_power_management), | 
|  | FsaNormal, | 
|  | 0, 1, | 
|  | (fib_callback)aac_start_stop_callback, | 
|  | (void *)scsicmd); | 
|  |  | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | aac_fib_complete(cmd_fibcontext); | 
|  | aac_fib_free(cmd_fibcontext); | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	aac_scsi_cmd()		-	Process SCSI command | 
|  | *	@scsicmd:		SCSI command block | 
|  | * | 
|  | *	Emulate a SCSI command and queue the required request for the | 
|  | *	aacraid firmware. | 
|  | */ | 
|  |  | 
|  | int aac_scsi_cmd(struct scsi_cmnd * scsicmd) | 
|  | { | 
|  | u32 cid; | 
|  | struct Scsi_Host *host = scsicmd->device->host; | 
|  | struct aac_dev *dev = (struct aac_dev *)host->hostdata; | 
|  | struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev; | 
|  |  | 
|  | if (fsa_dev_ptr == NULL) | 
|  | return -1; | 
|  | /* | 
|  | *	If the bus, id or lun is out of range, return fail | 
|  | *	Test does not apply to ID 16, the pseudo id for the controller | 
|  | *	itself. | 
|  | */ | 
|  | cid = scmd_id(scsicmd); | 
|  | if (cid != host->this_id) { | 
|  | if (scmd_channel(scsicmd) == CONTAINER_CHANNEL) { | 
|  | if((cid >= dev->maximum_num_containers) || | 
|  | (scsicmd->device->lun != 0)) { | 
|  | scsicmd->result = DID_NO_CONNECT << 16; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	If the target container doesn't exist, it may have | 
|  | *	been newly created | 
|  | */ | 
|  | if (((fsa_dev_ptr[cid].valid & 1) == 0) || | 
|  | (fsa_dev_ptr[cid].sense_data.sense_key == | 
|  | NOT_READY)) { | 
|  | switch (scsicmd->cmnd[0]) { | 
|  | case SERVICE_ACTION_IN: | 
|  | if (!(dev->raw_io_interface) || | 
|  | !(dev->raw_io_64) || | 
|  | ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16)) | 
|  | break; | 
|  | case INQUIRY: | 
|  | case READ_CAPACITY: | 
|  | case TEST_UNIT_READY: | 
|  | if (dev->in_reset) | 
|  | return -1; | 
|  | return _aac_probe_container(scsicmd, | 
|  | aac_probe_container_callback2); | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  | } else {  /* check for physical non-dasd devices */ | 
|  | if (dev->nondasd_support || expose_physicals || | 
|  | dev->jbod) { | 
|  | if (dev->in_reset) | 
|  | return -1; | 
|  | return aac_send_srb_fib(scsicmd); | 
|  | } else { | 
|  | scsicmd->result = DID_NO_CONNECT << 16; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | } | 
|  | /* | 
|  | * else Command for the controller itself | 
|  | */ | 
|  | else if ((scsicmd->cmnd[0] != INQUIRY) &&	/* only INQUIRY & TUR cmnd supported for controller */ | 
|  | (scsicmd->cmnd[0] != TEST_UNIT_READY)) | 
|  | { | 
|  | dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0])); | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense(&dev->fsa_dev[cid].sense_data, | 
|  | ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND, | 
|  | ASENCODE_INVALID_COMMAND, 0, 0); | 
|  | memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | 
|  | min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), | 
|  | SCSI_SENSE_BUFFERSIZE)); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Handle commands here that don't really require going out to the adapter */ | 
|  | switch (scsicmd->cmnd[0]) { | 
|  | case INQUIRY: | 
|  | { | 
|  | struct inquiry_data inq_data; | 
|  |  | 
|  | dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", cid)); | 
|  | memset(&inq_data, 0, sizeof (struct inquiry_data)); | 
|  |  | 
|  | if ((scsicmd->cmnd[1] & 0x1) && aac_wwn) { | 
|  | char *arr = (char *)&inq_data; | 
|  |  | 
|  | /* EVPD bit set */ | 
|  | arr[0] = (scmd_id(scsicmd) == host->this_id) ? | 
|  | INQD_PDT_PROC : INQD_PDT_DA; | 
|  | if (scsicmd->cmnd[2] == 0) { | 
|  | /* supported vital product data pages */ | 
|  | arr[3] = 2; | 
|  | arr[4] = 0x0; | 
|  | arr[5] = 0x80; | 
|  | arr[1] = scsicmd->cmnd[2]; | 
|  | scsi_sg_copy_from_buffer(scsicmd, &inq_data, | 
|  | sizeof(inq_data)); | 
|  | scsicmd->result = DID_OK << 16 | | 
|  | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | } else if (scsicmd->cmnd[2] == 0x80) { | 
|  | /* unit serial number page */ | 
|  | arr[3] = setinqserial(dev, &arr[4], | 
|  | scmd_id(scsicmd)); | 
|  | arr[1] = scsicmd->cmnd[2]; | 
|  | scsi_sg_copy_from_buffer(scsicmd, &inq_data, | 
|  | sizeof(inq_data)); | 
|  | if (aac_wwn != 2) | 
|  | return aac_get_container_serial( | 
|  | scsicmd); | 
|  | /* SLES 10 SP1 special */ | 
|  | scsicmd->result = DID_OK << 16 | | 
|  | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | } else { | 
|  | /* vpd page not implemented */ | 
|  | scsicmd->result = DID_OK << 16 | | 
|  | COMMAND_COMPLETE << 8 | | 
|  | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense(&dev->fsa_dev[cid].sense_data, | 
|  | ILLEGAL_REQUEST, SENCODE_INVALID_CDB_FIELD, | 
|  | ASENCODE_NO_SENSE, 7, 2); | 
|  | memcpy(scsicmd->sense_buffer, | 
|  | &dev->fsa_dev[cid].sense_data, | 
|  | min_t(size_t, | 
|  | sizeof(dev->fsa_dev[cid].sense_data), | 
|  | SCSI_SENSE_BUFFERSIZE)); | 
|  | } | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | inq_data.inqd_ver = 2;	/* claim compliance to SCSI-2 */ | 
|  | inq_data.inqd_rdf = 2;	/* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */ | 
|  | inq_data.inqd_len = 31; | 
|  | /*Format for "pad2" is  RelAdr | WBus32 | WBus16 |  Sync  | Linked |Reserved| CmdQue | SftRe */ | 
|  | inq_data.inqd_pad2= 0x32 ;	 /*WBus16|Sync|CmdQue */ | 
|  | /* | 
|  | *	Set the Vendor, Product, and Revision Level | 
|  | *	see: <vendor>.c i.e. aac.c | 
|  | */ | 
|  | if (cid == host->this_id) { | 
|  | setinqstr(dev, (void *) (inq_data.inqd_vid), ARRAY_SIZE(container_types)); | 
|  | inq_data.inqd_pdt = INQD_PDT_PROC;	/* Processor device */ | 
|  | scsi_sg_copy_from_buffer(scsicmd, &inq_data, | 
|  | sizeof(inq_data)); | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | if (dev->in_reset) | 
|  | return -1; | 
|  | setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type); | 
|  | inq_data.inqd_pdt = INQD_PDT_DA;	/* Direct/random access device */ | 
|  | scsi_sg_copy_from_buffer(scsicmd, &inq_data, sizeof(inq_data)); | 
|  | return aac_get_container_name(scsicmd); | 
|  | } | 
|  | case SERVICE_ACTION_IN: | 
|  | if (!(dev->raw_io_interface) || | 
|  | !(dev->raw_io_64) || | 
|  | ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16)) | 
|  | break; | 
|  | { | 
|  | u64 capacity; | 
|  | char cp[13]; | 
|  | unsigned int alloc_len; | 
|  |  | 
|  | dprintk((KERN_DEBUG "READ CAPACITY_16 command.\n")); | 
|  | capacity = fsa_dev_ptr[cid].size - 1; | 
|  | cp[0] = (capacity >> 56) & 0xff; | 
|  | cp[1] = (capacity >> 48) & 0xff; | 
|  | cp[2] = (capacity >> 40) & 0xff; | 
|  | cp[3] = (capacity >> 32) & 0xff; | 
|  | cp[4] = (capacity >> 24) & 0xff; | 
|  | cp[5] = (capacity >> 16) & 0xff; | 
|  | cp[6] = (capacity >> 8) & 0xff; | 
|  | cp[7] = (capacity >> 0) & 0xff; | 
|  | cp[8] = 0; | 
|  | cp[9] = 0; | 
|  | cp[10] = 2; | 
|  | cp[11] = 0; | 
|  | cp[12] = 0; | 
|  |  | 
|  | alloc_len = ((scsicmd->cmnd[10] << 24) | 
|  | + (scsicmd->cmnd[11] << 16) | 
|  | + (scsicmd->cmnd[12] << 8) + scsicmd->cmnd[13]); | 
|  |  | 
|  | alloc_len = min_t(size_t, alloc_len, sizeof(cp)); | 
|  | scsi_sg_copy_from_buffer(scsicmd, cp, alloc_len); | 
|  | if (alloc_len < scsi_bufflen(scsicmd)) | 
|  | scsi_set_resid(scsicmd, | 
|  | scsi_bufflen(scsicmd) - alloc_len); | 
|  |  | 
|  | /* Do not cache partition table for arrays */ | 
|  | scsicmd->device->removable = 1; | 
|  |  | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | case READ_CAPACITY: | 
|  | { | 
|  | u32 capacity; | 
|  | char cp[8]; | 
|  |  | 
|  | dprintk((KERN_DEBUG "READ CAPACITY command.\n")); | 
|  | if (fsa_dev_ptr[cid].size <= 0x100000000ULL) | 
|  | capacity = fsa_dev_ptr[cid].size - 1; | 
|  | else | 
|  | capacity = (u32)-1; | 
|  |  | 
|  | cp[0] = (capacity >> 24) & 0xff; | 
|  | cp[1] = (capacity >> 16) & 0xff; | 
|  | cp[2] = (capacity >> 8) & 0xff; | 
|  | cp[3] = (capacity >> 0) & 0xff; | 
|  | cp[4] = 0; | 
|  | cp[5] = 0; | 
|  | cp[6] = 2; | 
|  | cp[7] = 0; | 
|  | scsi_sg_copy_from_buffer(scsicmd, cp, sizeof(cp)); | 
|  | /* Do not cache partition table for arrays */ | 
|  | scsicmd->device->removable = 1; | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | | 
|  | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | case MODE_SENSE: | 
|  | { | 
|  | char mode_buf[7]; | 
|  | int mode_buf_length = 4; | 
|  |  | 
|  | dprintk((KERN_DEBUG "MODE SENSE command.\n")); | 
|  | mode_buf[0] = 3;	/* Mode data length */ | 
|  | mode_buf[1] = 0;	/* Medium type - default */ | 
|  | mode_buf[2] = 0;	/* Device-specific param, | 
|  | bit 8: 0/1 = write enabled/protected | 
|  | bit 4: 0/1 = FUA enabled */ | 
|  | if (dev->raw_io_interface && ((aac_cache & 5) != 1)) | 
|  | mode_buf[2] = 0x10; | 
|  | mode_buf[3] = 0;	/* Block descriptor length */ | 
|  | if (((scsicmd->cmnd[2] & 0x3f) == 8) || | 
|  | ((scsicmd->cmnd[2] & 0x3f) == 0x3f)) { | 
|  | mode_buf[0] = 6; | 
|  | mode_buf[4] = 8; | 
|  | mode_buf[5] = 1; | 
|  | mode_buf[6] = ((aac_cache & 6) == 2) | 
|  | ? 0 : 0x04; /* WCE */ | 
|  | mode_buf_length = 7; | 
|  | if (mode_buf_length > scsicmd->cmnd[4]) | 
|  | mode_buf_length = scsicmd->cmnd[4]; | 
|  | } | 
|  | scsi_sg_copy_from_buffer(scsicmd, mode_buf, mode_buf_length); | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | case MODE_SENSE_10: | 
|  | { | 
|  | char mode_buf[11]; | 
|  | int mode_buf_length = 8; | 
|  |  | 
|  | dprintk((KERN_DEBUG "MODE SENSE 10 byte command.\n")); | 
|  | mode_buf[0] = 0;	/* Mode data length (MSB) */ | 
|  | mode_buf[1] = 6;	/* Mode data length (LSB) */ | 
|  | mode_buf[2] = 0;	/* Medium type - default */ | 
|  | mode_buf[3] = 0;	/* Device-specific param, | 
|  | bit 8: 0/1 = write enabled/protected | 
|  | bit 4: 0/1 = FUA enabled */ | 
|  | if (dev->raw_io_interface && ((aac_cache & 5) != 1)) | 
|  | mode_buf[3] = 0x10; | 
|  | mode_buf[4] = 0;	/* reserved */ | 
|  | mode_buf[5] = 0;	/* reserved */ | 
|  | mode_buf[6] = 0;	/* Block descriptor length (MSB) */ | 
|  | mode_buf[7] = 0;	/* Block descriptor length (LSB) */ | 
|  | if (((scsicmd->cmnd[2] & 0x3f) == 8) || | 
|  | ((scsicmd->cmnd[2] & 0x3f) == 0x3f)) { | 
|  | mode_buf[1] = 9; | 
|  | mode_buf[8] = 8; | 
|  | mode_buf[9] = 1; | 
|  | mode_buf[10] = ((aac_cache & 6) == 2) | 
|  | ? 0 : 0x04; /* WCE */ | 
|  | mode_buf_length = 11; | 
|  | if (mode_buf_length > scsicmd->cmnd[8]) | 
|  | mode_buf_length = scsicmd->cmnd[8]; | 
|  | } | 
|  | scsi_sg_copy_from_buffer(scsicmd, mode_buf, mode_buf_length); | 
|  |  | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | case REQUEST_SENSE: | 
|  | dprintk((KERN_DEBUG "REQUEST SENSE command.\n")); | 
|  | memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, sizeof (struct sense_data)); | 
|  | memset(&dev->fsa_dev[cid].sense_data, 0, sizeof (struct sense_data)); | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  |  | 
|  | case ALLOW_MEDIUM_REMOVAL: | 
|  | dprintk((KERN_DEBUG "LOCK command.\n")); | 
|  | if (scsicmd->cmnd[4]) | 
|  | fsa_dev_ptr[cid].locked = 1; | 
|  | else | 
|  | fsa_dev_ptr[cid].locked = 0; | 
|  |  | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | /* | 
|  | *	These commands are all No-Ops | 
|  | */ | 
|  | case TEST_UNIT_READY: | 
|  | if (fsa_dev_ptr[cid].sense_data.sense_key == NOT_READY) { | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | | 
|  | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense(&dev->fsa_dev[cid].sense_data, | 
|  | NOT_READY, SENCODE_BECOMING_READY, | 
|  | ASENCODE_BECOMING_READY, 0, 0); | 
|  | memcpy(scsicmd->sense_buffer, | 
|  | &dev->fsa_dev[cid].sense_data, | 
|  | min_t(size_t, | 
|  | sizeof(dev->fsa_dev[cid].sense_data), | 
|  | SCSI_SENSE_BUFFERSIZE)); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | /* FALLTHRU */ | 
|  | case RESERVE: | 
|  | case RELEASE: | 
|  | case REZERO_UNIT: | 
|  | case REASSIGN_BLOCKS: | 
|  | case SEEK_10: | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  |  | 
|  | case START_STOP: | 
|  | return aac_start_stop(scsicmd); | 
|  | } | 
|  |  | 
|  | switch (scsicmd->cmnd[0]) | 
|  | { | 
|  | case READ_6: | 
|  | case READ_10: | 
|  | case READ_12: | 
|  | case READ_16: | 
|  | if (dev->in_reset) | 
|  | return -1; | 
|  | /* | 
|  | *	Hack to keep track of ordinal number of the device that | 
|  | *	corresponds to a container. Needed to convert | 
|  | *	containers to /dev/sd device names | 
|  | */ | 
|  |  | 
|  | if (scsicmd->request->rq_disk) | 
|  | strlcpy(fsa_dev_ptr[cid].devname, | 
|  | scsicmd->request->rq_disk->disk_name, | 
|  | min(sizeof(fsa_dev_ptr[cid].devname), | 
|  | sizeof(scsicmd->request->rq_disk->disk_name) + 1)); | 
|  |  | 
|  | return aac_read(scsicmd); | 
|  |  | 
|  | case WRITE_6: | 
|  | case WRITE_10: | 
|  | case WRITE_12: | 
|  | case WRITE_16: | 
|  | if (dev->in_reset) | 
|  | return -1; | 
|  | return aac_write(scsicmd); | 
|  |  | 
|  | case SYNCHRONIZE_CACHE: | 
|  | if (((aac_cache & 6) == 6) && dev->cache_protected) { | 
|  | scsicmd->result = DID_OK << 16 | | 
|  | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | /* Issue FIB to tell Firmware to flush it's cache */ | 
|  | if ((aac_cache & 6) != 2) | 
|  | return aac_synchronize(scsicmd); | 
|  | /* FALLTHRU */ | 
|  | default: | 
|  | /* | 
|  | *	Unhandled commands | 
|  | */ | 
|  | dprintk((KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0])); | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | 
|  | set_sense(&dev->fsa_dev[cid].sense_data, | 
|  | ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND, | 
|  | ASENCODE_INVALID_COMMAND, 0, 0); | 
|  | memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | 
|  | min_t(size_t, | 
|  | sizeof(dev->fsa_dev[cid].sense_data), | 
|  | SCSI_SENSE_BUFFERSIZE)); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int query_disk(struct aac_dev *dev, void __user *arg) | 
|  | { | 
|  | struct aac_query_disk qd; | 
|  | struct fsa_dev_info *fsa_dev_ptr; | 
|  |  | 
|  | fsa_dev_ptr = dev->fsa_dev; | 
|  | if (!fsa_dev_ptr) | 
|  | return -EBUSY; | 
|  | if (copy_from_user(&qd, arg, sizeof (struct aac_query_disk))) | 
|  | return -EFAULT; | 
|  | if (qd.cnum == -1) | 
|  | qd.cnum = qd.id; | 
|  | else if ((qd.bus == -1) && (qd.id == -1) && (qd.lun == -1)) | 
|  | { | 
|  | if (qd.cnum < 0 || qd.cnum >= dev->maximum_num_containers) | 
|  | return -EINVAL; | 
|  | qd.instance = dev->scsi_host_ptr->host_no; | 
|  | qd.bus = 0; | 
|  | qd.id = CONTAINER_TO_ID(qd.cnum); | 
|  | qd.lun = CONTAINER_TO_LUN(qd.cnum); | 
|  | } | 
|  | else return -EINVAL; | 
|  |  | 
|  | qd.valid = fsa_dev_ptr[qd.cnum].valid != 0; | 
|  | qd.locked = fsa_dev_ptr[qd.cnum].locked; | 
|  | qd.deleted = fsa_dev_ptr[qd.cnum].deleted; | 
|  |  | 
|  | if (fsa_dev_ptr[qd.cnum].devname[0] == '\0') | 
|  | qd.unmapped = 1; | 
|  | else | 
|  | qd.unmapped = 0; | 
|  |  | 
|  | strlcpy(qd.name, fsa_dev_ptr[qd.cnum].devname, | 
|  | min(sizeof(qd.name), sizeof(fsa_dev_ptr[qd.cnum].devname) + 1)); | 
|  |  | 
|  | if (copy_to_user(arg, &qd, sizeof (struct aac_query_disk))) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int force_delete_disk(struct aac_dev *dev, void __user *arg) | 
|  | { | 
|  | struct aac_delete_disk dd; | 
|  | struct fsa_dev_info *fsa_dev_ptr; | 
|  |  | 
|  | fsa_dev_ptr = dev->fsa_dev; | 
|  | if (!fsa_dev_ptr) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk))) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (dd.cnum >= dev->maximum_num_containers) | 
|  | return -EINVAL; | 
|  | /* | 
|  | *	Mark this container as being deleted. | 
|  | */ | 
|  | fsa_dev_ptr[dd.cnum].deleted = 1; | 
|  | /* | 
|  | *	Mark the container as no longer valid | 
|  | */ | 
|  | fsa_dev_ptr[dd.cnum].valid = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int delete_disk(struct aac_dev *dev, void __user *arg) | 
|  | { | 
|  | struct aac_delete_disk dd; | 
|  | struct fsa_dev_info *fsa_dev_ptr; | 
|  |  | 
|  | fsa_dev_ptr = dev->fsa_dev; | 
|  | if (!fsa_dev_ptr) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk))) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (dd.cnum >= dev->maximum_num_containers) | 
|  | return -EINVAL; | 
|  | /* | 
|  | *	If the container is locked, it can not be deleted by the API. | 
|  | */ | 
|  | if (fsa_dev_ptr[dd.cnum].locked) | 
|  | return -EBUSY; | 
|  | else { | 
|  | /* | 
|  | *	Mark the container as no longer being valid. | 
|  | */ | 
|  | fsa_dev_ptr[dd.cnum].valid = 0; | 
|  | fsa_dev_ptr[dd.cnum].devname[0] = '\0'; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg) | 
|  | { | 
|  | switch (cmd) { | 
|  | case FSACTL_QUERY_DISK: | 
|  | return query_disk(dev, arg); | 
|  | case FSACTL_DELETE_DISK: | 
|  | return delete_disk(dev, arg); | 
|  | case FSACTL_FORCE_DELETE_DISK: | 
|  | return force_delete_disk(dev, arg); | 
|  | case FSACTL_GET_CONTAINERS: | 
|  | return aac_get_containers(dev); | 
|  | default: | 
|  | return -ENOTTY; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * | 
|  | * aac_srb_callback | 
|  | * @context: the context set in the fib - here it is scsi cmd | 
|  | * @fibptr: pointer to the fib | 
|  | * | 
|  | * Handles the completion of a scsi command to a non dasd device | 
|  | * | 
|  | */ | 
|  |  | 
|  | static void aac_srb_callback(void *context, struct fib * fibptr) | 
|  | { | 
|  | struct aac_dev *dev; | 
|  | struct aac_srb_reply *srbreply; | 
|  | struct scsi_cmnd *scsicmd; | 
|  |  | 
|  | scsicmd = (struct scsi_cmnd *) context; | 
|  |  | 
|  | if (!aac_valid_context(scsicmd, fibptr)) | 
|  | return; | 
|  |  | 
|  | BUG_ON(fibptr == NULL); | 
|  |  | 
|  | dev = fibptr->dev; | 
|  |  | 
|  | srbreply = (struct aac_srb_reply *) fib_data(fibptr); | 
|  |  | 
|  | scsicmd->sense_buffer[0] = '\0';  /* Initialize sense valid flag to false */ | 
|  | /* | 
|  | *	Calculate resid for sg | 
|  | */ | 
|  |  | 
|  | scsi_set_resid(scsicmd, scsi_bufflen(scsicmd) | 
|  | - le32_to_cpu(srbreply->data_xfer_length)); | 
|  |  | 
|  | scsi_dma_unmap(scsicmd); | 
|  |  | 
|  | /* | 
|  | * First check the fib status | 
|  | */ | 
|  |  | 
|  | if (le32_to_cpu(srbreply->status) != ST_OK){ | 
|  | int len; | 
|  | printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status)); | 
|  | len = min_t(u32, le32_to_cpu(srbreply->sense_data_size), | 
|  | SCSI_SENSE_BUFFERSIZE); | 
|  | scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | 
|  | memcpy(scsicmd->sense_buffer, srbreply->sense_data, len); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Next check the srb status | 
|  | */ | 
|  | switch( (le32_to_cpu(srbreply->srb_status))&0x3f){ | 
|  | case SRB_STATUS_ERROR_RECOVERY: | 
|  | case SRB_STATUS_PENDING: | 
|  | case SRB_STATUS_SUCCESS: | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  | case SRB_STATUS_DATA_OVERRUN: | 
|  | switch(scsicmd->cmnd[0]){ | 
|  | case  READ_6: | 
|  | case  WRITE_6: | 
|  | case  READ_10: | 
|  | case  WRITE_10: | 
|  | case  READ_12: | 
|  | case  WRITE_12: | 
|  | case  READ_16: | 
|  | case  WRITE_16: | 
|  | if (le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow) { | 
|  | printk(KERN_WARNING"aacraid: SCSI CMD underflow\n"); | 
|  | } else { | 
|  | printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n"); | 
|  | } | 
|  | scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  | case INQUIRY: { | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  | } | 
|  | default: | 
|  | scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case SRB_STATUS_ABORTED: | 
|  | scsicmd->result = DID_ABORT << 16 | ABORT << 8; | 
|  | break; | 
|  | case SRB_STATUS_ABORT_FAILED: | 
|  | // Not sure about this one - but assuming the hba was trying to abort for some reason | 
|  | scsicmd->result = DID_ERROR << 16 | ABORT << 8; | 
|  | break; | 
|  | case SRB_STATUS_PARITY_ERROR: | 
|  | scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8; | 
|  | break; | 
|  | case SRB_STATUS_NO_DEVICE: | 
|  | case SRB_STATUS_INVALID_PATH_ID: | 
|  | case SRB_STATUS_INVALID_TARGET_ID: | 
|  | case SRB_STATUS_INVALID_LUN: | 
|  | case SRB_STATUS_SELECTION_TIMEOUT: | 
|  | scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  |  | 
|  | case SRB_STATUS_COMMAND_TIMEOUT: | 
|  | case SRB_STATUS_TIMEOUT: | 
|  | scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  |  | 
|  | case SRB_STATUS_BUSY: | 
|  | scsicmd->result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  |  | 
|  | case SRB_STATUS_BUS_RESET: | 
|  | scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  |  | 
|  | case SRB_STATUS_MESSAGE_REJECTED: | 
|  | scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8; | 
|  | break; | 
|  | case SRB_STATUS_REQUEST_FLUSHED: | 
|  | case SRB_STATUS_ERROR: | 
|  | case SRB_STATUS_INVALID_REQUEST: | 
|  | case SRB_STATUS_REQUEST_SENSE_FAILED: | 
|  | case SRB_STATUS_NO_HBA: | 
|  | case SRB_STATUS_UNEXPECTED_BUS_FREE: | 
|  | case SRB_STATUS_PHASE_SEQUENCE_FAILURE: | 
|  | case SRB_STATUS_BAD_SRB_BLOCK_LENGTH: | 
|  | case SRB_STATUS_DELAYED_RETRY: | 
|  | case SRB_STATUS_BAD_FUNCTION: | 
|  | case SRB_STATUS_NOT_STARTED: | 
|  | case SRB_STATUS_NOT_IN_USE: | 
|  | case SRB_STATUS_FORCE_ABORT: | 
|  | case SRB_STATUS_DOMAIN_VALIDATION_FAIL: | 
|  | default: | 
|  | #ifdef AAC_DETAILED_STATUS_INFO | 
|  | printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n", | 
|  | le32_to_cpu(srbreply->srb_status) & 0x3F, | 
|  | aac_get_status_string( | 
|  | le32_to_cpu(srbreply->srb_status) & 0x3F), | 
|  | scsicmd->cmnd[0], | 
|  | le32_to_cpu(srbreply->scsi_status)); | 
|  | #endif | 
|  | scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8; | 
|  | break; | 
|  | } | 
|  | if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) { | 
|  | int len; | 
|  | scsicmd->result |= SAM_STAT_CHECK_CONDITION; | 
|  | len = min_t(u32, le32_to_cpu(srbreply->sense_data_size), | 
|  | SCSI_SENSE_BUFFERSIZE); | 
|  | #ifdef AAC_DETAILED_STATUS_INFO | 
|  | printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n", | 
|  | le32_to_cpu(srbreply->status), len); | 
|  | #endif | 
|  | memcpy(scsicmd->sense_buffer, srbreply->sense_data, len); | 
|  | } | 
|  | /* | 
|  | * OR in the scsi status (already shifted up a bit) | 
|  | */ | 
|  | scsicmd->result |= le32_to_cpu(srbreply->scsi_status); | 
|  |  | 
|  | aac_fib_complete(fibptr); | 
|  | aac_fib_free(fibptr); | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * | 
|  | * aac_send_scb_fib | 
|  | * @scsicmd: the scsi command block | 
|  | * | 
|  | * This routine will form a FIB and fill in the aac_srb from the | 
|  | * scsicmd passed in. | 
|  | */ | 
|  |  | 
|  | static int aac_send_srb_fib(struct scsi_cmnd* scsicmd) | 
|  | { | 
|  | struct fib* cmd_fibcontext; | 
|  | struct aac_dev* dev; | 
|  | int status; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  | if (scmd_id(scsicmd) >= dev->maximum_num_physicals || | 
|  | scsicmd->device->lun > 7) { | 
|  | scsicmd->result = DID_NO_CONNECT << 16; | 
|  | scsicmd->scsi_done(scsicmd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	Allocate and initialize a Fib then setup a BlockWrite command | 
|  | */ | 
|  | if (!(cmd_fibcontext = aac_fib_alloc(dev))) { | 
|  | return -1; | 
|  | } | 
|  | status = aac_adapter_scsi(cmd_fibcontext, scsicmd); | 
|  |  | 
|  | /* | 
|  | *	Check that the command queued to the controller | 
|  | */ | 
|  | if (status == -EINPROGRESS) { | 
|  | scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_WARNING "aac_srb: aac_fib_send failed with status: %d\n", status); | 
|  | aac_fib_complete(cmd_fibcontext); | 
|  | aac_fib_free(cmd_fibcontext); | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg) | 
|  | { | 
|  | struct aac_dev *dev; | 
|  | unsigned long byte_count = 0; | 
|  | int nseg; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  | // Get rid of old data | 
|  | psg->count = 0; | 
|  | psg->sg[0].addr = 0; | 
|  | psg->sg[0].count = 0; | 
|  |  | 
|  | nseg = scsi_dma_map(scsicmd); | 
|  | BUG_ON(nseg < 0); | 
|  | if (nseg) { | 
|  | struct scatterlist *sg; | 
|  | int i; | 
|  |  | 
|  | psg->count = cpu_to_le32(nseg); | 
|  |  | 
|  | scsi_for_each_sg(scsicmd, sg, nseg, i) { | 
|  | psg->sg[i].addr = cpu_to_le32(sg_dma_address(sg)); | 
|  | psg->sg[i].count = cpu_to_le32(sg_dma_len(sg)); | 
|  | byte_count += sg_dma_len(sg); | 
|  | } | 
|  | /* hba wants the size to be exact */ | 
|  | if (byte_count > scsi_bufflen(scsicmd)) { | 
|  | u32 temp = le32_to_cpu(psg->sg[i-1].count) - | 
|  | (byte_count - scsi_bufflen(scsicmd)); | 
|  | psg->sg[i-1].count = cpu_to_le32(temp); | 
|  | byte_count = scsi_bufflen(scsicmd); | 
|  | } | 
|  | /* Check for command underflow */ | 
|  | if(scsicmd->underflow && (byte_count < scsicmd->underflow)){ | 
|  | printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", | 
|  | byte_count, scsicmd->underflow); | 
|  | } | 
|  | } | 
|  | return byte_count; | 
|  | } | 
|  |  | 
|  |  | 
|  | static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg) | 
|  | { | 
|  | struct aac_dev *dev; | 
|  | unsigned long byte_count = 0; | 
|  | u64 addr; | 
|  | int nseg; | 
|  |  | 
|  | dev = (struct aac_dev *)scsicmd->device->host->hostdata; | 
|  | // Get rid of old data | 
|  | psg->count = 0; | 
|  | psg->sg[0].addr[0] = 0; | 
|  | psg->sg[0].addr[1] = 0; | 
|  | psg->sg[0].count = 0; | 
|  |  | 
|  | nseg = scsi_dma_map(scsicmd); | 
|  | BUG_ON(nseg < 0); | 
|  | if (nseg) { | 
|  | struct scatterlist *sg; | 
|  | int i; | 
|  |  | 
|  | scsi_for_each_sg(scsicmd, sg, nseg, i) { | 
|  | int count = sg_dma_len(sg); | 
|  | addr = sg_dma_address(sg); | 
|  | psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff); | 
|  | psg->sg[i].addr[1] = cpu_to_le32(addr>>32); | 
|  | psg->sg[i].count = cpu_to_le32(count); | 
|  | byte_count += count; | 
|  | } | 
|  | psg->count = cpu_to_le32(nseg); | 
|  | /* hba wants the size to be exact */ | 
|  | if (byte_count > scsi_bufflen(scsicmd)) { | 
|  | u32 temp = le32_to_cpu(psg->sg[i-1].count) - | 
|  | (byte_count - scsi_bufflen(scsicmd)); | 
|  | psg->sg[i-1].count = cpu_to_le32(temp); | 
|  | byte_count = scsi_bufflen(scsicmd); | 
|  | } | 
|  | /* Check for command underflow */ | 
|  | if(scsicmd->underflow && (byte_count < scsicmd->underflow)){ | 
|  | printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", | 
|  | byte_count, scsicmd->underflow); | 
|  | } | 
|  | } | 
|  | return byte_count; | 
|  | } | 
|  |  | 
|  | static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg) | 
|  | { | 
|  | unsigned long byte_count = 0; | 
|  | int nseg; | 
|  |  | 
|  | // Get rid of old data | 
|  | psg->count = 0; | 
|  | psg->sg[0].next = 0; | 
|  | psg->sg[0].prev = 0; | 
|  | psg->sg[0].addr[0] = 0; | 
|  | psg->sg[0].addr[1] = 0; | 
|  | psg->sg[0].count = 0; | 
|  | psg->sg[0].flags = 0; | 
|  |  | 
|  | nseg = scsi_dma_map(scsicmd); | 
|  | BUG_ON(nseg < 0); | 
|  | if (nseg) { | 
|  | struct scatterlist *sg; | 
|  | int i; | 
|  |  | 
|  | scsi_for_each_sg(scsicmd, sg, nseg, i) { | 
|  | int count = sg_dma_len(sg); | 
|  | u64 addr = sg_dma_address(sg); | 
|  | psg->sg[i].next = 0; | 
|  | psg->sg[i].prev = 0; | 
|  | psg->sg[i].addr[1] = cpu_to_le32((u32)(addr>>32)); | 
|  | psg->sg[i].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff)); | 
|  | psg->sg[i].count = cpu_to_le32(count); | 
|  | psg->sg[i].flags = 0; | 
|  | byte_count += count; | 
|  | } | 
|  | psg->count = cpu_to_le32(nseg); | 
|  | /* hba wants the size to be exact */ | 
|  | if (byte_count > scsi_bufflen(scsicmd)) { | 
|  | u32 temp = le32_to_cpu(psg->sg[i-1].count) - | 
|  | (byte_count - scsi_bufflen(scsicmd)); | 
|  | psg->sg[i-1].count = cpu_to_le32(temp); | 
|  | byte_count = scsi_bufflen(scsicmd); | 
|  | } | 
|  | /* Check for command underflow */ | 
|  | if(scsicmd->underflow && (byte_count < scsicmd->underflow)){ | 
|  | printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", | 
|  | byte_count, scsicmd->underflow); | 
|  | } | 
|  | } | 
|  | return byte_count; | 
|  | } | 
|  |  | 
|  | #ifdef AAC_DETAILED_STATUS_INFO | 
|  |  | 
|  | struct aac_srb_status_info { | 
|  | u32	status; | 
|  | char	*str; | 
|  | }; | 
|  |  | 
|  |  | 
|  | static struct aac_srb_status_info srb_status_info[] = { | 
|  | { SRB_STATUS_PENDING,		"Pending Status"}, | 
|  | { SRB_STATUS_SUCCESS,		"Success"}, | 
|  | { SRB_STATUS_ABORTED,		"Aborted Command"}, | 
|  | { SRB_STATUS_ABORT_FAILED,	"Abort Failed"}, | 
|  | { SRB_STATUS_ERROR,		"Error Event"}, | 
|  | { SRB_STATUS_BUSY,		"Device Busy"}, | 
|  | { SRB_STATUS_INVALID_REQUEST,	"Invalid Request"}, | 
|  | { SRB_STATUS_INVALID_PATH_ID,	"Invalid Path ID"}, | 
|  | { SRB_STATUS_NO_DEVICE,		"No Device"}, | 
|  | { SRB_STATUS_TIMEOUT,		"Timeout"}, | 
|  | { SRB_STATUS_SELECTION_TIMEOUT,	"Selection Timeout"}, | 
|  | { SRB_STATUS_COMMAND_TIMEOUT,	"Command Timeout"}, | 
|  | { SRB_STATUS_MESSAGE_REJECTED,	"Message Rejected"}, | 
|  | { SRB_STATUS_BUS_RESET,		"Bus Reset"}, | 
|  | { SRB_STATUS_PARITY_ERROR,	"Parity Error"}, | 
|  | { SRB_STATUS_REQUEST_SENSE_FAILED,"Request Sense Failed"}, | 
|  | { SRB_STATUS_NO_HBA,		"No HBA"}, | 
|  | { SRB_STATUS_DATA_OVERRUN,	"Data Overrun/Data Underrun"}, | 
|  | { SRB_STATUS_UNEXPECTED_BUS_FREE,"Unexpected Bus Free"}, | 
|  | { SRB_STATUS_PHASE_SEQUENCE_FAILURE,"Phase Error"}, | 
|  | { SRB_STATUS_BAD_SRB_BLOCK_LENGTH,"Bad Srb Block Length"}, | 
|  | { SRB_STATUS_REQUEST_FLUSHED,	"Request Flushed"}, | 
|  | { SRB_STATUS_DELAYED_RETRY,	"Delayed Retry"}, | 
|  | { SRB_STATUS_INVALID_LUN,	"Invalid LUN"}, | 
|  | { SRB_STATUS_INVALID_TARGET_ID,	"Invalid TARGET ID"}, | 
|  | { SRB_STATUS_BAD_FUNCTION,	"Bad Function"}, | 
|  | { SRB_STATUS_ERROR_RECOVERY,	"Error Recovery"}, | 
|  | { SRB_STATUS_NOT_STARTED,	"Not Started"}, | 
|  | { SRB_STATUS_NOT_IN_USE,	"Not In Use"}, | 
|  | { SRB_STATUS_FORCE_ABORT,	"Force Abort"}, | 
|  | { SRB_STATUS_DOMAIN_VALIDATION_FAIL,"Domain Validation Failure"}, | 
|  | { 0xff,				"Unknown Error"} | 
|  | }; | 
|  |  | 
|  | char *aac_get_status_string(u32 status) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(srb_status_info); i++) | 
|  | if (srb_status_info[i].status == status) | 
|  | return srb_status_info[i].str; | 
|  |  | 
|  | return "Bad Status Code"; | 
|  | } | 
|  |  | 
|  | #endif |