OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead
Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS,
and convert omap_read/write into a functions instead of a macros.
Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE.
In the long run, most code should use ioremap + __raw_read/write instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index e3ac94f..bf08634 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2337,16 +2337,16 @@
int ch, r;
if (cpu_class_is_omap1()) {
- omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
+ omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap24xx()) {
- omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
+ omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap34xx()) {
- omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
+ omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap44xx()) {
- omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+ omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else {
pr_err("DMA init failed for unsupported omap\n");
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 7f50b61..d325b54 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -774,7 +774,10 @@
for (i = 0; i < dm_timer_count; i++) {
timer = &dm_timers[i];
- timer->io_base = IO_ADDRESS(timer->phys_base);
+ if (cpu_class_is_omap1())
+ timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
+ else
+ timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
if (cpu_class_is_omap2()) {
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9298bc0..fd63dd3 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -31,7 +31,7 @@
/*
* OMAP1510 GPIO registers
*/
-#define OMAP1510_GPIO_BASE IO_ADDRESS(0xfffce000)
+#define OMAP1510_GPIO_BASE OMAP1_IO_ADDRESS(0xfffce000)
#define OMAP1510_GPIO_DATA_INPUT 0x00
#define OMAP1510_GPIO_DATA_OUTPUT 0x04
#define OMAP1510_GPIO_DIR_CONTROL 0x08
@@ -45,10 +45,10 @@
/*
* OMAP1610 specific GPIO registers
*/
-#define OMAP1610_GPIO1_BASE IO_ADDRESS(0xfffbe400)
-#define OMAP1610_GPIO2_BASE IO_ADDRESS(0xfffbec00)
-#define OMAP1610_GPIO3_BASE IO_ADDRESS(0xfffbb400)
-#define OMAP1610_GPIO4_BASE IO_ADDRESS(0xfffbbc00)
+#define OMAP1610_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbe400)
+#define OMAP1610_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbec00)
+#define OMAP1610_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbb400)
+#define OMAP1610_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbbc00)
#define OMAP1610_GPIO_REVISION 0x0000
#define OMAP1610_GPIO_SYSCONFIG 0x0010
#define OMAP1610_GPIO_SYSSTATUS 0x0014
@@ -70,12 +70,12 @@
/*
* OMAP730 specific GPIO registers
*/
-#define OMAP730_GPIO1_BASE IO_ADDRESS(0xfffbc000)
-#define OMAP730_GPIO2_BASE IO_ADDRESS(0xfffbc800)
-#define OMAP730_GPIO3_BASE IO_ADDRESS(0xfffbd000)
-#define OMAP730_GPIO4_BASE IO_ADDRESS(0xfffbd800)
-#define OMAP730_GPIO5_BASE IO_ADDRESS(0xfffbe000)
-#define OMAP730_GPIO6_BASE IO_ADDRESS(0xfffbe800)
+#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000)
+#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800)
+#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000)
+#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800)
+#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000)
+#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800)
#define OMAP730_GPIO_DATA_INPUT 0x00
#define OMAP730_GPIO_DATA_OUTPUT 0x04
#define OMAP730_GPIO_DIR_CONTROL 0x08
@@ -86,12 +86,12 @@
/*
* OMAP850 specific GPIO registers
*/
-#define OMAP850_GPIO1_BASE IO_ADDRESS(0xfffbc000)
-#define OMAP850_GPIO2_BASE IO_ADDRESS(0xfffbc800)
-#define OMAP850_GPIO3_BASE IO_ADDRESS(0xfffbd000)
-#define OMAP850_GPIO4_BASE IO_ADDRESS(0xfffbd800)
-#define OMAP850_GPIO5_BASE IO_ADDRESS(0xfffbe000)
-#define OMAP850_GPIO6_BASE IO_ADDRESS(0xfffbe800)
+#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000)
+#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800)
+#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000)
+#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800)
+#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000)
+#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800)
#define OMAP850_GPIO_DATA_INPUT 0x00
#define OMAP850_GPIO_DATA_OUTPUT 0x04
#define OMAP850_GPIO_DIR_CONTROL 0x08
@@ -99,19 +99,21 @@
#define OMAP850_GPIO_INT_MASK 0x10
#define OMAP850_GPIO_INT_STATUS 0x14
+#define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP_MPUIO_BASE)
+
/*
* omap24xx specific GPIO registers
*/
-#define OMAP242X_GPIO1_BASE IO_ADDRESS(0x48018000)
-#define OMAP242X_GPIO2_BASE IO_ADDRESS(0x4801a000)
-#define OMAP242X_GPIO3_BASE IO_ADDRESS(0x4801c000)
-#define OMAP242X_GPIO4_BASE IO_ADDRESS(0x4801e000)
+#define OMAP242X_GPIO1_BASE OMAP2_IO_ADDRESS(0x48018000)
+#define OMAP242X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4801a000)
+#define OMAP242X_GPIO3_BASE OMAP2_IO_ADDRESS(0x4801c000)
+#define OMAP242X_GPIO4_BASE OMAP2_IO_ADDRESS(0x4801e000)
-#define OMAP243X_GPIO1_BASE IO_ADDRESS(0x4900C000)
-#define OMAP243X_GPIO2_BASE IO_ADDRESS(0x4900E000)
-#define OMAP243X_GPIO3_BASE IO_ADDRESS(0x49010000)
-#define OMAP243X_GPIO4_BASE IO_ADDRESS(0x49012000)
-#define OMAP243X_GPIO5_BASE IO_ADDRESS(0x480B6000)
+#define OMAP243X_GPIO1_BASE OMAP2_IO_ADDRESS(0x4900C000)
+#define OMAP243X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4900E000)
+#define OMAP243X_GPIO3_BASE OMAP2_IO_ADDRESS(0x49010000)
+#define OMAP243X_GPIO4_BASE OMAP2_IO_ADDRESS(0x49012000)
+#define OMAP243X_GPIO5_BASE OMAP2_IO_ADDRESS(0x480B6000)
#define OMAP24XX_GPIO_REVISION 0x0000
#define OMAP24XX_GPIO_SYSCONFIG 0x0010
@@ -142,24 +144,22 @@
* omap34xx specific GPIO registers
*/
-#define OMAP34XX_GPIO1_BASE IO_ADDRESS(0x48310000)
-#define OMAP34XX_GPIO2_BASE IO_ADDRESS(0x49050000)
-#define OMAP34XX_GPIO3_BASE IO_ADDRESS(0x49052000)
-#define OMAP34XX_GPIO4_BASE IO_ADDRESS(0x49054000)
-#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000)
-#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000)
+#define OMAP34XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x48310000)
+#define OMAP34XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x49050000)
+#define OMAP34XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x49052000)
+#define OMAP34XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x49054000)
+#define OMAP34XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x49056000)
+#define OMAP34XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x49058000)
/*
* OMAP44XX specific GPIO registers
*/
-#define OMAP44XX_GPIO1_BASE IO_ADDRESS(0x4a310000)
-#define OMAP44XX_GPIO2_BASE IO_ADDRESS(0x48055000)
-#define OMAP44XX_GPIO3_BASE IO_ADDRESS(0x48057000)
-#define OMAP44XX_GPIO4_BASE IO_ADDRESS(0x48059000)
-#define OMAP44XX_GPIO5_BASE IO_ADDRESS(0x4805B000)
-#define OMAP44XX_GPIO6_BASE IO_ADDRESS(0x4805D000)
-
-#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE)
+#define OMAP44XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x4805D000)
struct gpio_bank {
void __iomem *base;
@@ -195,7 +195,7 @@
#ifdef CONFIG_ARCH_OMAP16XX
static struct gpio_bank gpio_bank_1610[5] = {
- { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
+ { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 },
{ OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
{ OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
@@ -205,14 +205,14 @@
#ifdef CONFIG_ARCH_OMAP15XX
static struct gpio_bank gpio_bank_1510[2] = {
- { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
+ { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 }
};
#endif
#ifdef CONFIG_ARCH_OMAP730
static struct gpio_bank gpio_bank_730[7] = {
- { OMAP_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
+ { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 },
{ OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 },
{ OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 },
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 8140dbc..826d317 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -20,15 +20,15 @@
#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
- IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+ OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
- IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+ OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
- IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+ OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
#else
-#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define OMAP242X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
#endif /* __ASSEMBLY__ */
/*
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 56426ed..a559299 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -41,7 +41,7 @@
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =IO_ADDRESS(OMAP_IH1_BASE)
+ ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET]
mov \irqstat, #0xffffffff
@@ -53,7 +53,7 @@
cmp \irqnr, #0
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
cmpeq \irqnr, #INT_IH2_IRQ
- ldreq \base, =IO_ADDRESS(OMAP_IH2_BASE)
+ ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
addeqs \irqnr, \irqnr, #32
1510:
@@ -68,9 +68,9 @@
/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
#elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
#endif
#if defined(CONFIG_ARCH_OMAP4)
#include <mach/omap44xx.h>
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 21fb0ef..5565980 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -54,15 +54,23 @@
* ----------------------------------------------------------------------------
*/
+#ifdef __ASSEMBLER__
+#define IOMEM(x) (x)
+#else
+#define IOMEM(x) ((void __force __iomem *)(x))
+#endif
+
+#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
+
+#define OMAP2_IO_OFFSET 0x90000000
+#define OMAP2_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
+
#if defined(CONFIG_ARCH_OMAP1)
#define IO_PHYS 0xFFFB0000
-#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define IO_SIZE 0x40000
-#define IO_VIRT (IO_PHYS - IO_OFFSET)
-#define __IO_ADDRESS(pa) ((pa) - IO_OFFSET)
-#define __OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET)
-#define io_v2p(va) ((va) + IO_OFFSET)
+#define IO_VIRT (IO_PHYS - OMAP1_IO_OFFSET)
#elif defined(CONFIG_ARCH_OMAP2)
@@ -87,11 +95,6 @@
#define OMAP243X_SMS_VIRT 0xFC000000
#define OMAP243X_SMS_SIZE SZ_1M
-#define IO_OFFSET 0x90000000
-#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
-#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */
-
/* DSP */
#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */
#define DSP_MEM_24XX_VIRT 0xe0000000
@@ -143,12 +146,6 @@
#define OMAP343X_SDRC_VIRT 0xFD000000
#define OMAP343X_SDRC_SIZE SZ_1M
-
-#define IO_OFFSET 0x90000000
-#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
-
/* DSP */
#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */
#define DSP_MEM_34XX_VIRT 0xe0000000
@@ -188,39 +185,20 @@
#define OMAP44XX_GPMC_VIRT 0xe0000000
#define OMAP44XX_GPMC_SIZE SZ_1M
-
-#define IO_OFFSET 0x90000000
-#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
-
#endif
-#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa))
-#define OMAP1_IO_ADDRESS(pa) IOMEM(__OMAP1_IO_ADDRESS(pa))
-#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa))
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x) (x)
-#else
-#define IOMEM(x) ((void __force __iomem *)(x))
+#ifndef __ASSEMBLER__
/*
- * Functions to access the OMAP IO region
- *
- * NOTE: - Use omap_read/write[bwl] for physical register addresses
- * - Use __raw_read/write[bwl]() for virtual register addresses
- * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- * - DO NOT use hardcoded virtual addresses to allow changing the
- * IO address space again if needed
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
-#define omap_readb(a) __raw_readb(IO_ADDRESS(a))
-#define omap_readw(a) __raw_readw(IO_ADDRESS(a))
-#define omap_readl(a) __raw_readl(IO_ADDRESS(a))
-#define omap_writeb(v,a) __raw_writeb(v, IO_ADDRESS(a))
-#define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a))
-#define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a))
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
struct omap_sdrc_params;
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
index 39b591f..f82a8dc 100644
--- a/arch/arm/plat-omap/include/mach/mtd-xip.h
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -25,7 +25,7 @@
} xip_omap_mpu_timer_regs_t;
#define xip_omap_mpu_timer_base(n) \
-((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
+((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
(n)*OMAP_MPU_TIMER_OFFSET))
static inline unsigned long xip_omap_mpu_timer_read(int nr)
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
index 15dec7f..b3ba5ac 100644
--- a/arch/arm/plat-omap/include/mach/omap44xx.h
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -33,14 +33,14 @@
#define IRQ_SIR_IRQ 0x0040
#define OMAP44XX_GIC_DIST_BASE 0x48241000
#define OMAP44XX_GIC_CPU_BASE 0x48240100
-#define OMAP44XX_VA_GIC_CPU_BASE IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
#define OMAP44XX_SCU_BASE 0x48240000
-#define OMAP44XX_VA_SCU_BASE IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_VA_SCU_BASE OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
-#define OMAP44XX_VA_LOCAL_TWD_BASE IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_VA_LOCAL_TWD_BASE OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100
#define OMAP44XX_WKUPGEN_BASE 0x48281000
-#define OMAP44XX_VA_WKUPGEN_BASE IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+#define OMAP44XX_VA_WKUPGEN_BASE OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
#endif /* __ASM_ARCH_OMAP44XX_H */
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 0be18e4..93f70d2 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -71,11 +71,11 @@
*/
#define OMAP242X_SMS_REGADDR(reg) \
- (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+ (void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
#define OMAP243X_SMS_REGADDR(reg) \
- (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+ (void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
#define OMAP343X_SMS_REGADDR(reg) \
- (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+ (void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
/* SMS register offsets - read/write with sms_{read,write}_reg() */
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 9b42d72..d491ad1 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -132,3 +132,61 @@
__iounmap(addr);
}
EXPORT_SYMBOL(omap_iounmap);
+
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+
+u8 omap_readb(u32 pa)
+{
+ if (cpu_class_is_omap1())
+ return __raw_readb(OMAP1_IO_ADDRESS(pa));
+ else
+ return __raw_readb(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readb);
+
+u16 omap_readw(u32 pa)
+{
+ if (cpu_class_is_omap1())
+ return __raw_readw(OMAP1_IO_ADDRESS(pa));
+ else
+ return __raw_readw(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readw);
+
+u32 omap_readl(u32 pa)
+{
+ if (cpu_class_is_omap1())
+ return __raw_readl(OMAP1_IO_ADDRESS(pa));
+ else
+ return __raw_readl(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readl);
+
+void omap_writeb(u8 v, u32 pa)
+{
+ if (cpu_class_is_omap1())
+ __raw_writeb(v, OMAP1_IO_ADDRESS(pa));
+ else
+ __raw_writeb(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writeb);
+
+void omap_writew(u16 v, u32 pa)
+{
+ if (cpu_class_is_omap1())
+ __raw_writew(v, OMAP1_IO_ADDRESS(pa));
+ else
+ __raw_writew(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writew);
+
+void omap_writel(u32 v, u32 pa)
+{
+ if (cpu_class_is_omap1())
+ __raw_writel(v, OMAP1_IO_ADDRESS(pa));
+ else
+ __raw_writel(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 5eae787..925f647 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -56,16 +56,16 @@
#define SRAM_BOOTLOADER_SZ 0x80
#endif
-#define OMAP24XX_VA_REQINFOPERM0 IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0 IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0 IO_ADDRESS(0x68005058)
+#define OMAP24XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68005058)
-#define OMAP34XX_VA_REQINFOPERM0 IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0 IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0 IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2 IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0 IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT IO_ADDRESS(0x480022F0)
+#define OMAP34XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT OMAP2_IO_ADDRESS(0x480022F0)
#define GP_DEVICE 0x300