|  | /* | 
|  | * arch/sh/mm/ioremap.c | 
|  | * | 
|  | * Re-map IO memory to kernel address space so that we can access it. | 
|  | * This is needed for high PCI addresses that aren't mapped in the | 
|  | * 640k-1MB IO memory area on PC's | 
|  | * | 
|  | * (C) Copyright 1995 1996 Linus Torvalds | 
|  | * (C) Copyright 2005, 2006 Paul Mundt | 
|  | * | 
|  | * This file is subject to the terms and conditions of the GNU General | 
|  | * Public License. See the file "COPYING" in the main directory of this | 
|  | * archive for more details. | 
|  | */ | 
|  | #include <linux/vmalloc.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/pci.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/pgalloc.h> | 
|  | #include <asm/addrspace.h> | 
|  | #include <asm/cacheflush.h> | 
|  | #include <asm/tlbflush.h> | 
|  |  | 
|  | static inline void remap_area_pte(pte_t * pte, unsigned long address, | 
|  | unsigned long size, unsigned long phys_addr, unsigned long flags) | 
|  | { | 
|  | unsigned long end; | 
|  | unsigned long pfn; | 
|  | pgprot_t pgprot = __pgprot(pgprot_val(PAGE_KERNEL_NOCACHE) | flags); | 
|  |  | 
|  | address &= ~PMD_MASK; | 
|  | end = address + size; | 
|  | if (end > PMD_SIZE) | 
|  | end = PMD_SIZE; | 
|  | if (address >= end) | 
|  | BUG(); | 
|  | pfn = phys_addr >> PAGE_SHIFT; | 
|  | do { | 
|  | if (!pte_none(*pte)) { | 
|  | printk("remap_area_pte: page already exists\n"); | 
|  | BUG(); | 
|  | } | 
|  | set_pte(pte, pfn_pte(pfn, pgprot)); | 
|  | address += PAGE_SIZE; | 
|  | pfn++; | 
|  | pte++; | 
|  | } while (address && (address < end)); | 
|  | } | 
|  |  | 
|  | static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, | 
|  | unsigned long size, unsigned long phys_addr, unsigned long flags) | 
|  | { | 
|  | unsigned long end; | 
|  |  | 
|  | address &= ~PGDIR_MASK; | 
|  | end = address + size; | 
|  | if (end > PGDIR_SIZE) | 
|  | end = PGDIR_SIZE; | 
|  | phys_addr -= address; | 
|  | if (address >= end) | 
|  | BUG(); | 
|  | do { | 
|  | pte_t * pte = pte_alloc_kernel(pmd, address); | 
|  | if (!pte) | 
|  | return -ENOMEM; | 
|  | remap_area_pte(pte, address, end - address, address + phys_addr, flags); | 
|  | address = (address + PMD_SIZE) & PMD_MASK; | 
|  | pmd++; | 
|  | } while (address && (address < end)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int remap_area_pages(unsigned long address, unsigned long phys_addr, | 
|  | unsigned long size, unsigned long flags) | 
|  | { | 
|  | int error; | 
|  | pgd_t * dir; | 
|  | unsigned long end = address + size; | 
|  |  | 
|  | phys_addr -= address; | 
|  | dir = pgd_offset_k(address); | 
|  | flush_cache_all(); | 
|  | if (address >= end) | 
|  | BUG(); | 
|  | do { | 
|  | pud_t *pud; | 
|  | pmd_t *pmd; | 
|  |  | 
|  | error = -ENOMEM; | 
|  |  | 
|  | pud = pud_alloc(&init_mm, dir, address); | 
|  | if (!pud) | 
|  | break; | 
|  | pmd = pmd_alloc(&init_mm, pud, address); | 
|  | if (!pmd) | 
|  | break; | 
|  | if (remap_area_pmd(pmd, address, end - address, | 
|  | phys_addr + address, flags)) | 
|  | break; | 
|  | error = 0; | 
|  | address = (address + PGDIR_SIZE) & PGDIR_MASK; | 
|  | dir++; | 
|  | } while (address && (address < end)); | 
|  | flush_tlb_all(); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Remap an arbitrary physical address space into the kernel virtual | 
|  | * address space. Needed when the kernel wants to access high addresses | 
|  | * directly. | 
|  | * | 
|  | * NOTE! We need to allow non-page-aligned mappings too: we will obviously | 
|  | * have to convert them into an offset in a page-aligned mapping, but the | 
|  | * caller shouldn't need to know that small detail. | 
|  | */ | 
|  | void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, | 
|  | unsigned long flags) | 
|  | { | 
|  | struct vm_struct * area; | 
|  | unsigned long offset, last_addr, addr, orig_addr; | 
|  |  | 
|  | /* Don't allow wraparound or zero size */ | 
|  | last_addr = phys_addr + size - 1; | 
|  | if (!size || last_addr < phys_addr) | 
|  | return NULL; | 
|  |  | 
|  | /* | 
|  | * Don't remap the low PCI/ISA area, it's always mapped.. | 
|  | */ | 
|  | if (phys_addr >= 0xA0000 && last_addr < 0x100000) | 
|  | return (void __iomem *)phys_to_virt(phys_addr); | 
|  |  | 
|  | /* | 
|  | * If we're on an SH7751 or SH7780 PCI controller, PCI memory is | 
|  | * mapped at the end of the address space (typically 0xfd000000) | 
|  | * in a non-translatable area, so mapping through page tables for | 
|  | * this area is not only pointless, but also fundamentally | 
|  | * broken. Just return the physical address instead. | 
|  | * | 
|  | * For boards that map a small PCI memory aperture somewhere in | 
|  | * P1/P2 space, ioremap() will already do the right thing, | 
|  | * and we'll never get this far. | 
|  | */ | 
|  | if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr)) | 
|  | return (void __iomem *)phys_addr; | 
|  |  | 
|  | /* | 
|  | * Don't allow anybody to remap normal RAM that we're using.. | 
|  | */ | 
|  | if (phys_addr < virt_to_phys(high_memory)) | 
|  | return NULL; | 
|  |  | 
|  | /* | 
|  | * Mappings have to be page-aligned | 
|  | */ | 
|  | offset = phys_addr & ~PAGE_MASK; | 
|  | phys_addr &= PAGE_MASK; | 
|  | size = PAGE_ALIGN(last_addr+1) - phys_addr; | 
|  |  | 
|  | /* | 
|  | * Ok, go for it.. | 
|  | */ | 
|  | area = get_vm_area(size, VM_IOREMAP); | 
|  | if (!area) | 
|  | return NULL; | 
|  | area->phys_addr = phys_addr; | 
|  | orig_addr = addr = (unsigned long)area->addr; | 
|  |  | 
|  | #ifdef CONFIG_32BIT | 
|  | /* | 
|  | * First try to remap through the PMB once a valid VMA has been | 
|  | * established. Smaller allocations (or the rest of the size | 
|  | * remaining after a PMB mapping due to the size not being | 
|  | * perfectly aligned on a PMB size boundary) are then mapped | 
|  | * through the UTLB using conventional page tables. | 
|  | * | 
|  | * PMB entries are all pre-faulted. | 
|  | */ | 
|  | if (unlikely(size >= 0x1000000)) { | 
|  | unsigned long mapped = pmb_remap(addr, phys_addr, size, flags); | 
|  |  | 
|  | if (likely(mapped)) { | 
|  | addr		+= mapped; | 
|  | phys_addr	+= mapped; | 
|  | size		-= mapped; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (likely(size)) | 
|  | if (remap_area_pages(addr, phys_addr, size, flags)) { | 
|  | vunmap((void *)orig_addr); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return (void __iomem *)(offset + (char *)orig_addr); | 
|  | } | 
|  | EXPORT_SYMBOL(__ioremap); | 
|  |  | 
|  | void __iounmap(void __iomem *addr) | 
|  | { | 
|  | unsigned long vaddr = (unsigned long __force)addr; | 
|  | struct vm_struct *p; | 
|  |  | 
|  | if (PXSEG(vaddr) < P3SEG || is_pci_memaddr(vaddr)) | 
|  | return; | 
|  |  | 
|  | #ifdef CONFIG_32BIT | 
|  | /* | 
|  | * Purge any PMB entries that may have been established for this | 
|  | * mapping, then proceed with conventional VMA teardown. | 
|  | * | 
|  | * XXX: Note that due to the way that remove_vm_area() does | 
|  | * matching of the resultant VMA, we aren't able to fast-forward | 
|  | * the address past the PMB space until the end of the VMA where | 
|  | * the page tables reside. As such, unmap_vm_area() will be | 
|  | * forced to linearly scan over the area until it finds the page | 
|  | * tables where PTEs that need to be unmapped actually reside, | 
|  | * which is far from optimal. Perhaps we need to use a separate | 
|  | * VMA for the PMB mappings? | 
|  | *					-- PFM. | 
|  | */ | 
|  | pmb_unmap(vaddr); | 
|  | #endif | 
|  |  | 
|  | p = remove_vm_area((void *)(vaddr & PAGE_MASK)); | 
|  | if (!p) { | 
|  | printk(KERN_ERR "%s: bad address %p\n", __FUNCTION__, addr); | 
|  | return; | 
|  | } | 
|  |  | 
|  | kfree(p); | 
|  | } | 
|  | EXPORT_SYMBOL(__iounmap); |