usb_serial: API all change
USB serial likes to use port->tty back pointers for the real work it does and
to do so without any actual locking. Unfortunately when you consider hangup
events, hangup/parallel reopen or even worse hangup followed by parallel close
events the tty->port and port->tty pointers are not guaranteed to be the same
as port->tty is the active tty while tty->port is the port the tty may or
may not still be attached to.
So rework the entire API to pass the tty struct. For console cases we need
to pass both for now. This shows up multiple drivers that immediately crash
with USB console some of which have been fixed in the process.
Longer term we need a proper tty as console abstraction
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 77895c8..aec6188 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -158,12 +158,13 @@
return -ENOMEM;
}
-static void ark3116_set_termios(struct usb_serial_port *port,
+static void ark3116_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct ark3116_private *priv = usb_get_serial_port_data(port);
- struct ktermios *termios = port->tty->termios;
+ struct ktermios *termios = tty->termios;
unsigned int cflag = termios->c_cflag;
unsigned long flags;
int baud;
@@ -177,8 +178,8 @@
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
- *(port->tty->termios) = tty_std_termios;
- port->tty->termios->c_cflag = B9600 | CS8
+ *termios = tty_std_termios;
+ termios->c_cflag = B9600 | CS8
| CREAD | HUPCL | CLOCAL;
termios->c_ispeed = 9600;
termios->c_ospeed = 9600;
@@ -192,7 +193,7 @@
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc");
- *port->tty->termios = *old_termios;
+ *termios = *old_termios;
return;
}
@@ -243,7 +244,7 @@
}
/* set baudrate */
- baud = tty_get_baud_rate(port->tty);
+ baud = tty_get_baud_rate(tty);
switch (baud) {
case 75:
@@ -262,11 +263,11 @@
case 230400:
case 460800:
/* Report the resulting rate back to the caller */
- tty_encode_baud_rate(port->tty, baud, baud);
+ tty_encode_baud_rate(tty, baud, baud);
break;
/* set 9600 as default (if given baudrate is invalid for example) */
default:
- tty_encode_baud_rate(port->tty, 9600, 9600);
+ tty_encode_baud_rate(tty, 9600, 9600);
case 0:
baud = 9600;
}
@@ -317,7 +318,8 @@
return;
}
-static int ark3116_open(struct usb_serial_port *port, struct file *filp)
+static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *filp)
{
struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
@@ -332,7 +334,7 @@
return -ENOMEM;
}
- result = usb_serial_generic_open(port, filp);
+ result = usb_serial_generic_open(tty, port, filp);
if (result)
goto err_out;
@@ -362,8 +364,8 @@
ARK3116_RCV(serial, 124, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);
/* initialise termios */
- if (port->tty)
- ark3116_set_termios(port, &tmp_termios);
+ if (tty)
+ ark3116_set_termios(tty, port, &tmp_termios);
err_out:
kfree(buf);
@@ -371,9 +373,10 @@
return result;
}
-static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
+static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ struct usb_serial_port *port = tty->driver_data;
struct serial_struct serstruct;
void __user *user_arg = (void __user *)arg;
@@ -403,8 +406,9 @@
return -ENOIOCTLCMD;
}
-static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
+static int ark3116_tiocmget(struct tty_struct *tty, struct file *file)
{
+ struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
char *buf;
char temp;