i2c: Bus drivers return -Errno not -1
Tighten error paths used by various i2c adapters (mostly x86) so
they return real fault/errno codes instead of a "-1" (which is
most often interpreted as "-EPERM"). Build tested, with eyeball
review.
One minor initial goal is to have adapters consistently return
the code "-ENXIO" when addressing a device doesn't get an ACK
response, at least in the probe paths where they are already
good at stifling related logspam.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index b0f771f..7d6d9df 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -151,7 +151,7 @@
outb_p(temp, SMBHSTSTS);
if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp);
- return -1;
+ return -EBUSY;
} else {
dev_dbg(&I801_dev->dev, "Successful!\n");
}
@@ -170,7 +170,7 @@
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
- result = -1;
+ result = -ETIMEDOUT;
/* try to stop the current command */
dev_dbg(&I801_dev->dev, "Terminating the current operation\n");
outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
@@ -179,19 +179,19 @@
}
if (temp & SMBHSTSTS_FAILED) {
- result = -1;
+ result = -EIO;
dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n");
}
if (temp & SMBHSTSTS_BUS_ERR) {
- result = -1;
+ result = -EIO;
dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked "
"until next hard reset. (sorry!)\n");
/* Clock stops and slave is stuck in mid-transmission */
}
if (temp & SMBHSTSTS_DEV_ERR) {
- result = -1;
+ result = -ENXIO;
dev_dbg(&I801_dev->dev, "Error: no response!\n");
}
@@ -231,6 +231,7 @@
char read_write, int hwpec)
{
int i, len;
+ int status;
inb_p(SMBHSTCNT); /* reset the data buffer index */
@@ -242,14 +243,15 @@
outb_p(data->block[i+1], SMBBLKDAT);
}
- if (i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
- I801_PEC_EN * hwpec))
- return -1;
+ status = i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
+ I801_PEC_EN * hwpec);
+ if (status)
+ return status;
if (read_write == I2C_SMBUS_READ) {
len = inb_p(SMBHSTDAT0);
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
- return -1;
+ return -EPROTO;
data->block[0] = len;
for (i = 0; i < len; i++)
@@ -314,11 +316,11 @@
if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
dev_err(&I801_dev->dev,
"Reset failed! (%02x)\n", temp);
- return -1;
+ return -EBUSY;
}
if (i != 1)
/* if die in middle of block transaction, fail */
- return -1;
+ return -EIO;
}
if (i == 1)
@@ -342,19 +344,19 @@
msleep(1);
outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL),
SMBHSTCNT);
- result = -1;
+ result = -ETIMEDOUT;
dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
}
if (temp & SMBHSTSTS_FAILED) {
- result = -1;
+ result = -EIO;
dev_dbg(&I801_dev->dev,
"Error: Failed bus transaction\n");
} else if (temp & SMBHSTSTS_BUS_ERR) {
- result = -1;
+ result = -EIO;
dev_err(&I801_dev->dev, "Bus collision!\n");
} else if (temp & SMBHSTSTS_DEV_ERR) {
- result = -1;
+ result = -ENXIO;
dev_dbg(&I801_dev->dev, "Error: no response!\n");
}
@@ -362,7 +364,7 @@
&& command != I2C_SMBUS_I2C_BLOCK_DATA) {
len = inb_p(SMBHSTDAT0);
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
- return -1;
+ return -EPROTO;
data->block[0] = len;
}
@@ -394,7 +396,7 @@
{
outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
- return -1;
+ return -EIO;
return 0;
}
@@ -414,7 +416,7 @@
} else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) {
dev_err(&I801_dev->dev,
"I2C block read is unsupported!\n");
- return -1;
+ return -EOPNOTSUPP;
}
}
@@ -449,7 +451,7 @@
return result;
}
-/* Return -1 on error. */
+/* Return negative errno on error. */
static s32 i801_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data * data)
@@ -514,7 +516,7 @@
case I2C_SMBUS_PROC_CALL:
default:
dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
- return -1;
+ return -EOPNOTSUPP;
}
if (hwpec) /* enable/disable hardware PEC */
@@ -537,7 +539,7 @@
if(block)
return ret;
if(ret)
- return -1;
+ return ret;
if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
return 0;