[POWERPC] fsl: Convert dts to v1 syntax
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 8fb5423..4936349 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -1,7 +1,7 @@
/*
* MPC7448HPC2 (Taiga) board Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
* 2006 Roy Zang <Roy Zang at freescale.com>.
*
* This program is free software; you can redistribute it and/or modify it
@@ -10,6 +10,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "mpc7448hpc2";
@@ -23,11 +24,11 @@
PowerPC,7448@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K bytes
- i-cache-size = <8000>; // L1, 32K bytes
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K bytes
+ i-cache-size = <0x8000>; // L1, 32K bytes
timebase-frequency = <0>; // 33 MHz, from uboot
clock-frequency = <0>; // From U-Boot
bus-frequency = <0>; // From U-Boot
@@ -36,7 +37,7 @@
memory {
device_type = "memory";
- reg = <00000000 20000000 // DDR2 512M at 0
+ reg = <0x0 0x20000000 // DDR2 512M at 0
>;
};
@@ -44,14 +45,14 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "tsi-bridge";
- ranges = <00000000 c0000000 00010000>;
- reg = <c0000000 00010000>;
+ ranges = <0x0 0xc0000000 0x10000>;
+ reg = <0xc0000000 0x10000>;
bus-frequency = <0>;
i2c@7000 {
interrupt-parent = <&mpic>;
- interrupts = <E 0>;
- reg = <7000 400>;
+ interrupts = <14 0>;
+ reg = <0x7000 0x400>;
device_type = "i2c";
compatible = "tsi108-i2c";
};
@@ -59,20 +60,20 @@
MDIO: mdio@6000 {
device_type = "mdio";
compatible = "tsi108-mdio";
- reg = <6000 50>;
+ reg = <0x6000 0x50>;
#address-cells = <1>;
#size-cells = <0>;
phy8: ethernet-phy@8 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <8>;
+ reg = <0x8>;
};
phy9: ethernet-phy@9 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <9>;
+ reg = <0x9>;
};
};
@@ -82,9 +83,9 @@
#size-cells = <0>;
device_type = "network";
compatible = "tsi108-ethernet";
- reg = <6000 200>;
+ reg = <0x6000 0x200>;
address = [ 00 06 D2 00 00 01 ];
- interrupts = <10 2>;
+ interrupts = <16 2>;
interrupt-parent = <&mpic>;
mdio-handle = <&MDIO>;
phy-handle = <&phy8>;
@@ -96,9 +97,9 @@
#size-cells = <0>;
device_type = "network";
compatible = "tsi108-ethernet";
- reg = <6400 200>;
+ reg = <0x6400 0x200>;
address = [ 00 06 D2 00 00 02 ];
- interrupts = <11 2>;
+ interrupts = <17 2>;
interrupt-parent = <&mpic>;
mdio-handle = <&MDIO>;
phy-handle = <&phy9>;
@@ -107,18 +108,18 @@
serial@7808 {
device_type = "serial";
compatible = "ns16550";
- reg = <7808 200>;
- clock-frequency = <3f6b5a00>;
- interrupts = <c 0>;
+ reg = <0x7808 0x200>;
+ clock-frequency = <1064000000>;
+ interrupts = <12 0>;
interrupt-parent = <&mpic>;
};
serial@7c08 {
device_type = "serial";
compatible = "ns16550";
- reg = <7c08 200>;
- clock-frequency = <3f6b5a00>;
- interrupts = <d 0>;
+ reg = <0x7c08 0x200>;
+ clock-frequency = <1064000000>;
+ interrupts = <13 0>;
interrupt-parent = <&mpic>;
};
@@ -127,7 +128,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <7400 400>;
+ reg = <0x7400 0x400>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -138,39 +139,39 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <1000 1000>;
+ reg = <0x1000 0x1000>;
bus-range = <0 0>;
- ranges = <02000000 0 e0000000 e0000000 0 1A000000
- 01000000 0 00000000 fa000000 0 00010000>;
- clock-frequency = <7f28154>;
+ ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000
+ 0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>;
+ clock-frequency = <133333332>;
interrupt-parent = <&mpic>;
- interrupts = <17 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <23 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
- 0800 0 0 1 &RT0 24 0
- 0800 0 0 2 &RT0 25 0
- 0800 0 0 3 &RT0 26 0
- 0800 0 0 4 &RT0 27 0
+ 0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+ 0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+ 0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+ 0x800 0x0 0x0 0x4 &RT0 0x27 0x0
/* IDSEL 0x12 */
- 1000 0 0 1 &RT0 25 0
- 1000 0 0 2 &RT0 26 0
- 1000 0 0 3 &RT0 27 0
- 1000 0 0 4 &RT0 24 0
+ 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+ 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+ 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+ 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
/* IDSEL 0x13 */
- 1800 0 0 1 &RT0 26 0
- 1800 0 0 2 &RT0 27 0
- 1800 0 0 3 &RT0 24 0
- 1800 0 0 4 &RT0 25 0
+ 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+ 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+ 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+ 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
/* IDSEL 0x14 */
- 2000 0 0 1 &RT0 27 0
- 2000 0 0 2 &RT0 24 0
- 2000 0 0 3 &RT0 25 0
- 2000 0 0 4 &RT0 26 0
+ 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+ 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+ 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+ 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
>;
RT0: router@1180 {
@@ -180,7 +181,7 @@
#address-cells = <0>;
#interrupt-cells = <2>;
big-endian;
- interrupts = <17 2>;
+ interrupts = <23 2>;
interrupt-parent = <&mpic>;
};
};