[POWERPC] fsl: Convert dts to v1 syntax
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts
index 2d564921..b2d6109 100644
--- a/arch/powerpc/boot/dts/pq2fads.dts
+++ b/arch/powerpc/boot/dts/pq2fads.dts
@@ -1,7 +1,7 @@
/*
* Device Tree for the PQ2FADS-ZU board with an MPC8280 chip.
*
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007,2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,8 @@
* option) any later version.
*/
+/dts-v1/;
+
/ {
model = "pq2fads";
compatible = "fsl,pq2fads";
@@ -21,11 +23,11 @@
cpu@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <d#32>;
- i-cache-line-size = <d#32>;
- d-cache-size = <d#16384>;
- i-cache-size = <d#16384>;
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <16384>;
+ i-cache-size = <16384>;
timebase-frequency = <0>;
clock-frequency = <0>;
};
@@ -33,7 +35,7 @@
memory {
device_type = "memory";
- reg = <0 0>;
+ reg = <0x0 0x0>;
};
localbus@f0010100 {
@@ -41,67 +43,67 @@
"fsl,pq2-localbus";
#address-cells = <2>;
#size-cells = <1>;
- reg = <f0010100 60>;
+ reg = <0xf0010100 0x60>;
- ranges = <0 0 fe000000 00800000
- 1 0 f4500000 00008000
- 8 0 f8200000 00008000>;
+ ranges = <0x0 0x0 0xfe000000 0x800000
+ 0x1 0x0 0xf4500000 0x8000
+ 0x8 0x0 0xf8200000 0x8000>;
flash@0,0 {
compatible = "jedec-flash";
- reg = <0 0 800000>;
+ reg = <0x0 0x0 0x800000>;
bank-width = <4>;
device-width = <1>;
};
bcsr@1,0 {
- reg = <1 0 20>;
+ reg = <0x1 0x0 0x20>;
compatible = "fsl,pq2fads-bcsr";
};
PCI_PIC: pic@8,0 {
#interrupt-cells = <1>;
interrupt-controller;
- reg = <8 0 8>;
+ reg = <0x8 0x0 0x8>;
compatible = "fsl,pq2ads-pci-pic";
interrupt-parent = <&PIC>;
- interrupts = <18 8>;
+ interrupts = <24 8>;
};
};
pci@f0010800 {
device_type = "pci";
- reg = <f0010800 10c f00101ac 8 f00101c4 8>;
+ reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- clock-frequency = <d#66000000>;
- interrupt-map-mask = <f800 0 0 7>;
+ clock-frequency = <66000000>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x16 */
- b000 0 0 1 &PCI_PIC 0
- b000 0 0 2 &PCI_PIC 1
- b000 0 0 3 &PCI_PIC 2
- b000 0 0 4 &PCI_PIC 3
+ 0xb000 0x0 0x0 0x1 &PCI_PIC 0
+ 0xb000 0x0 0x0 0x2 &PCI_PIC 1
+ 0xb000 0x0 0x0 0x3 &PCI_PIC 2
+ 0xb000 0x0 0x0 0x4 &PCI_PIC 3
/* IDSEL 0x17 */
- b800 0 0 1 &PCI_PIC 4
- b800 0 0 2 &PCI_PIC 5
- b800 0 0 3 &PCI_PIC 6
- b800 0 0 4 &PCI_PIC 7
+ 0xb800 0x0 0x0 0x1 &PCI_PIC 4
+ 0xb800 0x0 0x0 0x2 &PCI_PIC 5
+ 0xb800 0x0 0x0 0x3 &PCI_PIC 6
+ 0xb800 0x0 0x0 0x4 &PCI_PIC 7
/* IDSEL 0x18 */
- c000 0 0 1 &PCI_PIC 8
- c000 0 0 2 &PCI_PIC 9
- c000 0 0 3 &PCI_PIC a
- c000 0 0 4 &PCI_PIC b>;
+ 0xc000 0x0 0x0 0x1 &PCI_PIC 8
+ 0xc000 0x0 0x0 0x2 &PCI_PIC 9
+ 0xc000 0x0 0x0 0x3 &PCI_PIC 10
+ 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
interrupt-parent = <&PIC>;
- interrupts = <12 8>;
- ranges = <42000000 0 80000000 80000000 0 20000000
- 02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 f6000000 0 02000000>;
+ interrupts = <18 8>;
+ ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
};
soc@f0000000 {
@@ -109,27 +111,27 @@
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8280", "fsl,pq2-soc";
- ranges = <00000000 f0000000 00053000>;
+ ranges = <0x0 0xf0000000 0x53000>;
// Temporary -- will go away once kernel uses ranges for get_immrbase().
- reg = <f0000000 00053000>;
+ reg = <0xf0000000 0x53000>;
cpm@119c0 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
compatible = "fsl,mpc8280-cpm", "fsl,cpm2";
- reg = <119c0 30>;
+ reg = <0x119c0 0x30>;
ranges;
muram@0 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0 10000>;
+ ranges = <0x0 0x0 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 2000 9800 800>;
+ reg = <0x0 0x2000 0x9800 0x800>;
};
};
@@ -137,53 +139,53 @@
compatible = "fsl,mpc8280-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
- reg = <119f0 10 115f0 10>;
+ reg = <0x119f0 0x10 0x115f0 0x10>;
};
serial@11a00 {
device_type = "serial";
compatible = "fsl,mpc8280-scc-uart",
"fsl,cpm2-scc-uart";
- reg = <11a00 20 8000 100>;
- interrupts = <28 8>;
+ reg = <0x11a00 0x20 0x8000 0x100>;
+ interrupts = <40 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <1>;
- fsl,cpm-command = <00800000>;
+ fsl,cpm-command = <0x800000>;
};
serial@11a20 {
device_type = "serial";
compatible = "fsl,mpc8280-scc-uart",
"fsl,cpm2-scc-uart";
- reg = <11a20 20 8100 100>;
- interrupts = <29 8>;
+ reg = <0x11a20 0x20 0x8100 0x100>;
+ interrupts = <41 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <2>;
- fsl,cpm-command = <04a00000>;
+ fsl,cpm-command = <0x4a00000>;
};
ethernet@11320 {
device_type = "network";
compatible = "fsl,mpc8280-fcc-enet",
"fsl,cpm2-fcc-enet";
- reg = <11320 20 8500 100 113b0 1>;
- interrupts = <21 8>;
+ reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+ interrupts = <33 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
linux,network-index = <0>;
- fsl,cpm-command = <16200300>;
+ fsl,cpm-command = <0x16200300>;
};
ethernet@11340 {
device_type = "network";
compatible = "fsl,mpc8280-fcc-enet",
"fsl,cpm2-fcc-enet";
- reg = <11340 20 8600 100 113d0 1>;
- interrupts = <22 8>;
+ reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>;
+ interrupts = <34 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY1>;
linux,network-index = <1>;
- fsl,cpm-command = <1a400300>;
+ fsl,cpm-command = <0x1a400300>;
local-mac-address = [00 e0 0c 00 79 01];
};
@@ -194,21 +196,21 @@
"fsl,cpm2-mdio-bitbang";
#address-cells = <1>;
#size-cells = <0>;
- reg = <10d40 14>;
+ reg = <0x10d40 0x14>;
fsl,mdio-pin = <9>;
- fsl,mdc-pin = <a>;
+ fsl,mdc-pin = <10>;
PHY0: ethernet-phy@0 {
interrupt-parent = <&PIC>;
- interrupts = <19 2>;
- reg = <0>;
+ interrupts = <25 2>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
- interrupts = <19 2>;
- reg = <3>;
+ interrupts = <25 2>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
@@ -218,17 +220,17 @@
#size-cells = <0>;
compatible = "fsl,mpc8280-usb",
"fsl,cpm2-usb";
- reg = <11b60 18 8b00 100>;
+ reg = <0x11b60 0x18 0x8b00 0x100>;
interrupt-parent = <&PIC>;
- interrupts = <b 8>;
- fsl,cpm-command = <2e600000>;
+ interrupts = <11 8>;
+ fsl,cpm-command = <0x2e600000>;
};
};
PIC: interrupt-controller@10c00 {
#interrupt-cells = <2>;
interrupt-controller;
- reg = <10c00 80>;
+ reg = <0x10c00 0x80>;
compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic";
};