|  | /* $Id: time.c,v 1.42 2002/01/23 14:33:55 davem Exp $ | 
|  | * time.c: UltraSparc timer and TOD clock support. | 
|  | * | 
|  | * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) | 
|  | * Copyright (C) 1998 Eddie C. Dost   (ecd@skynet.be) | 
|  | * | 
|  | * Based largely on code which is: | 
|  | * | 
|  | * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) | 
|  | */ | 
|  |  | 
|  | #include <linux/errno.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/param.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/time.h> | 
|  | #include <linux/timex.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/mc146818rtc.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/profile.h> | 
|  | #include <linux/bcd.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/cpufreq.h> | 
|  | #include <linux/percpu.h> | 
|  | #include <linux/profile.h> | 
|  | #include <linux/miscdevice.h> | 
|  | #include <linux/rtc.h> | 
|  |  | 
|  | #include <asm/oplib.h> | 
|  | #include <asm/mostek.h> | 
|  | #include <asm/timer.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/of_device.h> | 
|  | #include <asm/starfire.h> | 
|  | #include <asm/smp.h> | 
|  | #include <asm/sections.h> | 
|  | #include <asm/cpudata.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/irq_regs.h> | 
|  |  | 
|  | DEFINE_SPINLOCK(mostek_lock); | 
|  | DEFINE_SPINLOCK(rtc_lock); | 
|  | void __iomem *mstk48t02_regs = NULL; | 
|  | #ifdef CONFIG_PCI | 
|  | unsigned long ds1287_regs = 0UL; | 
|  | #endif | 
|  |  | 
|  | static void __iomem *mstk48t08_regs; | 
|  | static void __iomem *mstk48t59_regs; | 
|  |  | 
|  | static int set_rtc_mmss(unsigned long); | 
|  |  | 
|  | #define TICK_PRIV_BIT	(1UL << 63) | 
|  |  | 
|  | #ifdef CONFIG_SMP | 
|  | unsigned long profile_pc(struct pt_regs *regs) | 
|  | { | 
|  | unsigned long pc = instruction_pointer(regs); | 
|  |  | 
|  | if (in_lock_functions(pc)) | 
|  | return regs->u_regs[UREG_RETPC]; | 
|  | return pc; | 
|  | } | 
|  | EXPORT_SYMBOL(profile_pc); | 
|  | #endif | 
|  |  | 
|  | static void tick_disable_protection(void) | 
|  | { | 
|  | /* Set things up so user can access tick register for profiling | 
|  | * purposes.  Also workaround BB_ERRATA_1 by doing a dummy | 
|  | * read back of %tick after writing it. | 
|  | */ | 
|  | __asm__ __volatile__( | 
|  | "	ba,pt	%%xcc, 1f\n" | 
|  | "	 nop\n" | 
|  | "	.align	64\n" | 
|  | "1:	rd	%%tick, %%g2\n" | 
|  | "	add	%%g2, 6, %%g2\n" | 
|  | "	andn	%%g2, %0, %%g2\n" | 
|  | "	wrpr	%%g2, 0, %%tick\n" | 
|  | "	rdpr	%%tick, %%g0" | 
|  | : /* no outputs */ | 
|  | : "r" (TICK_PRIV_BIT) | 
|  | : "g2"); | 
|  | } | 
|  |  | 
|  | static void tick_init_tick(unsigned long offset) | 
|  | { | 
|  | tick_disable_protection(); | 
|  |  | 
|  | __asm__ __volatile__( | 
|  | "	rd	%%tick, %%g1\n" | 
|  | "	andn	%%g1, %1, %%g1\n" | 
|  | "	ba,pt	%%xcc, 1f\n" | 
|  | "	 add	%%g1, %0, %%g1\n" | 
|  | "	.align	64\n" | 
|  | "1:	wr	%%g1, 0x0, %%tick_cmpr\n" | 
|  | "	rd	%%tick_cmpr, %%g0" | 
|  | : /* no outputs */ | 
|  | : "r" (offset), "r" (TICK_PRIV_BIT) | 
|  | : "g1"); | 
|  | } | 
|  |  | 
|  | static unsigned long tick_get_tick(void) | 
|  | { | 
|  | unsigned long ret; | 
|  |  | 
|  | __asm__ __volatile__("rd	%%tick, %0\n\t" | 
|  | "mov	%0, %0" | 
|  | : "=r" (ret)); | 
|  |  | 
|  | return ret & ~TICK_PRIV_BIT; | 
|  | } | 
|  |  | 
|  | static unsigned long tick_get_compare(void) | 
|  | { | 
|  | unsigned long ret; | 
|  |  | 
|  | __asm__ __volatile__("rd	%%tick_cmpr, %0\n\t" | 
|  | "mov	%0, %0" | 
|  | : "=r" (ret)); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static unsigned long tick_add_compare(unsigned long adj) | 
|  | { | 
|  | unsigned long new_compare; | 
|  |  | 
|  | /* Workaround for Spitfire Errata (#54 I think??), I discovered | 
|  | * this via Sun BugID 4008234, mentioned in Solaris-2.5.1 patch | 
|  | * number 103640. | 
|  | * | 
|  | * On Blackbird writes to %tick_cmpr can fail, the | 
|  | * workaround seems to be to execute the wr instruction | 
|  | * at the start of an I-cache line, and perform a dummy | 
|  | * read back from %tick_cmpr right after writing to it. -DaveM | 
|  | */ | 
|  | __asm__ __volatile__("rd	%%tick_cmpr, %0\n\t" | 
|  | "ba,pt	%%xcc, 1f\n\t" | 
|  | " add	%0, %1, %0\n\t" | 
|  | ".align	64\n" | 
|  | "1:\n\t" | 
|  | "wr	%0, 0, %%tick_cmpr\n\t" | 
|  | "rd	%%tick_cmpr, %%g0" | 
|  | : "=&r" (new_compare) | 
|  | : "r" (adj)); | 
|  |  | 
|  | return new_compare; | 
|  | } | 
|  |  | 
|  | static unsigned long tick_add_tick(unsigned long adj, unsigned long offset) | 
|  | { | 
|  | unsigned long new_tick, tmp; | 
|  |  | 
|  | /* Also need to handle Blackbird bug here too. */ | 
|  | __asm__ __volatile__("rd	%%tick, %0\n\t" | 
|  | "add	%0, %2, %0\n\t" | 
|  | "wrpr	%0, 0, %%tick\n\t" | 
|  | "andn	%0, %4, %1\n\t" | 
|  | "ba,pt	%%xcc, 1f\n\t" | 
|  | " add	%1, %3, %1\n\t" | 
|  | ".align	64\n" | 
|  | "1:\n\t" | 
|  | "wr	%1, 0, %%tick_cmpr\n\t" | 
|  | "rd	%%tick_cmpr, %%g0" | 
|  | : "=&r" (new_tick), "=&r" (tmp) | 
|  | : "r" (adj), "r" (offset), "r" (TICK_PRIV_BIT)); | 
|  |  | 
|  | return new_tick; | 
|  | } | 
|  |  | 
|  | static struct sparc64_tick_ops tick_operations __read_mostly = { | 
|  | .init_tick	=	tick_init_tick, | 
|  | .get_tick	=	tick_get_tick, | 
|  | .get_compare	=	tick_get_compare, | 
|  | .add_tick	=	tick_add_tick, | 
|  | .add_compare	=	tick_add_compare, | 
|  | .softint_mask	=	1UL << 0, | 
|  | }; | 
|  |  | 
|  | struct sparc64_tick_ops *tick_ops __read_mostly = &tick_operations; | 
|  |  | 
|  | static void stick_init_tick(unsigned long offset) | 
|  | { | 
|  | /* Writes to the %tick and %stick register are not | 
|  | * allowed on sun4v.  The Hypervisor controls that | 
|  | * bit, per-strand. | 
|  | */ | 
|  | if (tlb_type != hypervisor) { | 
|  | tick_disable_protection(); | 
|  |  | 
|  | /* Let the user get at STICK too. */ | 
|  | __asm__ __volatile__( | 
|  | "	rd	%%asr24, %%g2\n" | 
|  | "	andn	%%g2, %0, %%g2\n" | 
|  | "	wr	%%g2, 0, %%asr24" | 
|  | : /* no outputs */ | 
|  | : "r" (TICK_PRIV_BIT) | 
|  | : "g1", "g2"); | 
|  | } | 
|  |  | 
|  | __asm__ __volatile__( | 
|  | "	rd	%%asr24, %%g1\n" | 
|  | "	andn	%%g1, %1, %%g1\n" | 
|  | "	add	%%g1, %0, %%g1\n" | 
|  | "	wr	%%g1, 0x0, %%asr25" | 
|  | : /* no outputs */ | 
|  | : "r" (offset), "r" (TICK_PRIV_BIT) | 
|  | : "g1"); | 
|  | } | 
|  |  | 
|  | static unsigned long stick_get_tick(void) | 
|  | { | 
|  | unsigned long ret; | 
|  |  | 
|  | __asm__ __volatile__("rd	%%asr24, %0" | 
|  | : "=r" (ret)); | 
|  |  | 
|  | return ret & ~TICK_PRIV_BIT; | 
|  | } | 
|  |  | 
|  | static unsigned long stick_get_compare(void) | 
|  | { | 
|  | unsigned long ret; | 
|  |  | 
|  | __asm__ __volatile__("rd	%%asr25, %0" | 
|  | : "=r" (ret)); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static unsigned long stick_add_tick(unsigned long adj, unsigned long offset) | 
|  | { | 
|  | unsigned long new_tick, tmp; | 
|  |  | 
|  | __asm__ __volatile__("rd	%%asr24, %0\n\t" | 
|  | "add	%0, %2, %0\n\t" | 
|  | "wr	%0, 0, %%asr24\n\t" | 
|  | "andn	%0, %4, %1\n\t" | 
|  | "add	%1, %3, %1\n\t" | 
|  | "wr	%1, 0, %%asr25" | 
|  | : "=&r" (new_tick), "=&r" (tmp) | 
|  | : "r" (adj), "r" (offset), "r" (TICK_PRIV_BIT)); | 
|  |  | 
|  | return new_tick; | 
|  | } | 
|  |  | 
|  | static unsigned long stick_add_compare(unsigned long adj) | 
|  | { | 
|  | unsigned long new_compare; | 
|  |  | 
|  | __asm__ __volatile__("rd	%%asr25, %0\n\t" | 
|  | "add	%0, %1, %0\n\t" | 
|  | "wr	%0, 0, %%asr25" | 
|  | : "=&r" (new_compare) | 
|  | : "r" (adj)); | 
|  |  | 
|  | return new_compare; | 
|  | } | 
|  |  | 
|  | static struct sparc64_tick_ops stick_operations __read_mostly = { | 
|  | .init_tick	=	stick_init_tick, | 
|  | .get_tick	=	stick_get_tick, | 
|  | .get_compare	=	stick_get_compare, | 
|  | .add_tick	=	stick_add_tick, | 
|  | .add_compare	=	stick_add_compare, | 
|  | .softint_mask	=	1UL << 16, | 
|  | }; | 
|  |  | 
|  | /* On Hummingbird the STICK/STICK_CMPR register is implemented | 
|  | * in I/O space.  There are two 64-bit registers each, the | 
|  | * first holds the low 32-bits of the value and the second holds | 
|  | * the high 32-bits. | 
|  | * | 
|  | * Since STICK is constantly updating, we have to access it carefully. | 
|  | * | 
|  | * The sequence we use to read is: | 
|  | * 1) read high | 
|  | * 2) read low | 
|  | * 3) read high again, if it rolled re-read both low and high again. | 
|  | * | 
|  | * Writing STICK safely is also tricky: | 
|  | * 1) write low to zero | 
|  | * 2) write high | 
|  | * 3) write low | 
|  | */ | 
|  | #define HBIRD_STICKCMP_ADDR	0x1fe0000f060UL | 
|  | #define HBIRD_STICK_ADDR	0x1fe0000f070UL | 
|  |  | 
|  | static unsigned long __hbird_read_stick(void) | 
|  | { | 
|  | unsigned long ret, tmp1, tmp2, tmp3; | 
|  | unsigned long addr = HBIRD_STICK_ADDR+8; | 
|  |  | 
|  | __asm__ __volatile__("ldxa	[%1] %5, %2\n" | 
|  | "1:\n\t" | 
|  | "sub	%1, 0x8, %1\n\t" | 
|  | "ldxa	[%1] %5, %3\n\t" | 
|  | "add	%1, 0x8, %1\n\t" | 
|  | "ldxa	[%1] %5, %4\n\t" | 
|  | "cmp	%4, %2\n\t" | 
|  | "bne,a,pn	%%xcc, 1b\n\t" | 
|  | " mov	%4, %2\n\t" | 
|  | "sllx	%4, 32, %4\n\t" | 
|  | "or	%3, %4, %0\n\t" | 
|  | : "=&r" (ret), "=&r" (addr), | 
|  | "=&r" (tmp1), "=&r" (tmp2), "=&r" (tmp3) | 
|  | : "i" (ASI_PHYS_BYPASS_EC_E), "1" (addr)); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static unsigned long __hbird_read_compare(void) | 
|  | { | 
|  | unsigned long low, high; | 
|  | unsigned long addr = HBIRD_STICKCMP_ADDR; | 
|  |  | 
|  | __asm__ __volatile__("ldxa	[%2] %3, %0\n\t" | 
|  | "add	%2, 0x8, %2\n\t" | 
|  | "ldxa	[%2] %3, %1" | 
|  | : "=&r" (low), "=&r" (high), "=&r" (addr) | 
|  | : "i" (ASI_PHYS_BYPASS_EC_E), "2" (addr)); | 
|  |  | 
|  | return (high << 32UL) | low; | 
|  | } | 
|  |  | 
|  | static void __hbird_write_stick(unsigned long val) | 
|  | { | 
|  | unsigned long low = (val & 0xffffffffUL); | 
|  | unsigned long high = (val >> 32UL); | 
|  | unsigned long addr = HBIRD_STICK_ADDR; | 
|  |  | 
|  | __asm__ __volatile__("stxa	%%g0, [%0] %4\n\t" | 
|  | "add	%0, 0x8, %0\n\t" | 
|  | "stxa	%3, [%0] %4\n\t" | 
|  | "sub	%0, 0x8, %0\n\t" | 
|  | "stxa	%2, [%0] %4" | 
|  | : "=&r" (addr) | 
|  | : "0" (addr), "r" (low), "r" (high), | 
|  | "i" (ASI_PHYS_BYPASS_EC_E)); | 
|  | } | 
|  |  | 
|  | static void __hbird_write_compare(unsigned long val) | 
|  | { | 
|  | unsigned long low = (val & 0xffffffffUL); | 
|  | unsigned long high = (val >> 32UL); | 
|  | unsigned long addr = HBIRD_STICKCMP_ADDR + 0x8UL; | 
|  |  | 
|  | __asm__ __volatile__("stxa	%3, [%0] %4\n\t" | 
|  | "sub	%0, 0x8, %0\n\t" | 
|  | "stxa	%2, [%0] %4" | 
|  | : "=&r" (addr) | 
|  | : "0" (addr), "r" (low), "r" (high), | 
|  | "i" (ASI_PHYS_BYPASS_EC_E)); | 
|  | } | 
|  |  | 
|  | static void hbtick_init_tick(unsigned long offset) | 
|  | { | 
|  | unsigned long val; | 
|  |  | 
|  | tick_disable_protection(); | 
|  |  | 
|  | /* XXX This seems to be necessary to 'jumpstart' Hummingbird | 
|  | * XXX into actually sending STICK interrupts.  I think because | 
|  | * XXX of how we store %tick_cmpr in head.S this somehow resets the | 
|  | * XXX {TICK + STICK} interrupt mux.  -DaveM | 
|  | */ | 
|  | __hbird_write_stick(__hbird_read_stick()); | 
|  |  | 
|  | val = __hbird_read_stick() & ~TICK_PRIV_BIT; | 
|  | __hbird_write_compare(val + offset); | 
|  | } | 
|  |  | 
|  | static unsigned long hbtick_get_tick(void) | 
|  | { | 
|  | return __hbird_read_stick() & ~TICK_PRIV_BIT; | 
|  | } | 
|  |  | 
|  | static unsigned long hbtick_get_compare(void) | 
|  | { | 
|  | return __hbird_read_compare(); | 
|  | } | 
|  |  | 
|  | static unsigned long hbtick_add_tick(unsigned long adj, unsigned long offset) | 
|  | { | 
|  | unsigned long val; | 
|  |  | 
|  | val = __hbird_read_stick() + adj; | 
|  | __hbird_write_stick(val); | 
|  |  | 
|  | val &= ~TICK_PRIV_BIT; | 
|  | __hbird_write_compare(val + offset); | 
|  |  | 
|  | return val; | 
|  | } | 
|  |  | 
|  | static unsigned long hbtick_add_compare(unsigned long adj) | 
|  | { | 
|  | unsigned long val = __hbird_read_compare() + adj; | 
|  |  | 
|  | val &= ~TICK_PRIV_BIT; | 
|  | __hbird_write_compare(val); | 
|  |  | 
|  | return val; | 
|  | } | 
|  |  | 
|  | static struct sparc64_tick_ops hbtick_operations __read_mostly = { | 
|  | .init_tick	=	hbtick_init_tick, | 
|  | .get_tick	=	hbtick_get_tick, | 
|  | .get_compare	=	hbtick_get_compare, | 
|  | .add_tick	=	hbtick_add_tick, | 
|  | .add_compare	=	hbtick_add_compare, | 
|  | .softint_mask	=	1UL << 0, | 
|  | }; | 
|  |  | 
|  | /* timer_interrupt() needs to keep up the real-time clock, | 
|  | * as well as call the "do_timer()" routine every clocktick | 
|  | * | 
|  | * NOTE: On SUN5 systems the ticker interrupt comes in using 2 | 
|  | *       interrupts, one at level14 and one with softint bit 0. | 
|  | */ | 
|  | unsigned long timer_tick_offset __read_mostly; | 
|  |  | 
|  | static unsigned long timer_ticks_per_nsec_quotient __read_mostly; | 
|  |  | 
|  | #define TICK_SIZE (tick_nsec / 1000) | 
|  |  | 
|  | static inline void timer_check_rtc(void) | 
|  | { | 
|  | /* last time the cmos clock got updated */ | 
|  | static long last_rtc_update; | 
|  |  | 
|  | /* Determine when to update the Mostek clock. */ | 
|  | if (ntp_synced() && | 
|  | xtime.tv_sec > last_rtc_update + 660 && | 
|  | (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && | 
|  | (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { | 
|  | if (set_rtc_mmss(xtime.tv_sec) == 0) | 
|  | last_rtc_update = xtime.tv_sec; | 
|  | else | 
|  | last_rtc_update = xtime.tv_sec - 600; | 
|  | /* do it again in 60 s */ | 
|  | } | 
|  | } | 
|  |  | 
|  | irqreturn_t timer_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | unsigned long ticks, compare, pstate; | 
|  |  | 
|  | write_seqlock(&xtime_lock); | 
|  |  | 
|  | do { | 
|  | #ifndef CONFIG_SMP | 
|  | profile_tick(CPU_PROFILING); | 
|  | update_process_times(user_mode(get_irq_regs())); | 
|  | #endif | 
|  | do_timer(1); | 
|  |  | 
|  | /* Guarantee that the following sequences execute | 
|  | * uninterrupted. | 
|  | */ | 
|  | __asm__ __volatile__("rdpr	%%pstate, %0\n\t" | 
|  | "wrpr	%0, %1, %%pstate" | 
|  | : "=r" (pstate) | 
|  | : "i" (PSTATE_IE)); | 
|  |  | 
|  | compare = tick_ops->add_compare(timer_tick_offset); | 
|  | ticks = tick_ops->get_tick(); | 
|  |  | 
|  | /* Restore PSTATE_IE. */ | 
|  | __asm__ __volatile__("wrpr	%0, 0x0, %%pstate" | 
|  | : /* no outputs */ | 
|  | : "r" (pstate)); | 
|  | } while (time_after_eq(ticks, compare)); | 
|  |  | 
|  | timer_check_rtc(); | 
|  |  | 
|  | write_sequnlock(&xtime_lock); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SMP | 
|  | void timer_tick_interrupt(struct pt_regs *regs) | 
|  | { | 
|  | write_seqlock(&xtime_lock); | 
|  |  | 
|  | do_timer(1); | 
|  |  | 
|  | timer_check_rtc(); | 
|  |  | 
|  | write_sequnlock(&xtime_lock); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* Kick start a stopped clock (procedure from the Sun NVRAM/hostid FAQ). */ | 
|  | static void __init kick_start_clock(void) | 
|  | { | 
|  | void __iomem *regs = mstk48t02_regs; | 
|  | u8 sec, tmp; | 
|  | int i, count; | 
|  |  | 
|  | prom_printf("CLOCK: Clock was stopped. Kick start "); | 
|  |  | 
|  | spin_lock_irq(&mostek_lock); | 
|  |  | 
|  | /* Turn on the kick start bit to start the oscillator. */ | 
|  | tmp = mostek_read(regs + MOSTEK_CREG); | 
|  | tmp |= MSTK_CREG_WRITE; | 
|  | mostek_write(regs + MOSTEK_CREG, tmp); | 
|  | tmp = mostek_read(regs + MOSTEK_SEC); | 
|  | tmp &= ~MSTK_STOP; | 
|  | mostek_write(regs + MOSTEK_SEC, tmp); | 
|  | tmp = mostek_read(regs + MOSTEK_HOUR); | 
|  | tmp |= MSTK_KICK_START; | 
|  | mostek_write(regs + MOSTEK_HOUR, tmp); | 
|  | tmp = mostek_read(regs + MOSTEK_CREG); | 
|  | tmp &= ~MSTK_CREG_WRITE; | 
|  | mostek_write(regs + MOSTEK_CREG, tmp); | 
|  |  | 
|  | spin_unlock_irq(&mostek_lock); | 
|  |  | 
|  | /* Delay to allow the clock oscillator to start. */ | 
|  | sec = MSTK_REG_SEC(regs); | 
|  | for (i = 0; i < 3; i++) { | 
|  | while (sec == MSTK_REG_SEC(regs)) | 
|  | for (count = 0; count < 100000; count++) | 
|  | /* nothing */ ; | 
|  | prom_printf("."); | 
|  | sec = MSTK_REG_SEC(regs); | 
|  | } | 
|  | prom_printf("\n"); | 
|  |  | 
|  | spin_lock_irq(&mostek_lock); | 
|  |  | 
|  | /* Turn off kick start and set a "valid" time and date. */ | 
|  | tmp = mostek_read(regs + MOSTEK_CREG); | 
|  | tmp |= MSTK_CREG_WRITE; | 
|  | mostek_write(regs + MOSTEK_CREG, tmp); | 
|  | tmp = mostek_read(regs + MOSTEK_HOUR); | 
|  | tmp &= ~MSTK_KICK_START; | 
|  | mostek_write(regs + MOSTEK_HOUR, tmp); | 
|  | MSTK_SET_REG_SEC(regs,0); | 
|  | MSTK_SET_REG_MIN(regs,0); | 
|  | MSTK_SET_REG_HOUR(regs,0); | 
|  | MSTK_SET_REG_DOW(regs,5); | 
|  | MSTK_SET_REG_DOM(regs,1); | 
|  | MSTK_SET_REG_MONTH(regs,8); | 
|  | MSTK_SET_REG_YEAR(regs,1996 - MSTK_YEAR_ZERO); | 
|  | tmp = mostek_read(regs + MOSTEK_CREG); | 
|  | tmp &= ~MSTK_CREG_WRITE; | 
|  | mostek_write(regs + MOSTEK_CREG, tmp); | 
|  |  | 
|  | spin_unlock_irq(&mostek_lock); | 
|  |  | 
|  | /* Ensure the kick start bit is off. If it isn't, turn it off. */ | 
|  | while (mostek_read(regs + MOSTEK_HOUR) & MSTK_KICK_START) { | 
|  | prom_printf("CLOCK: Kick start still on!\n"); | 
|  |  | 
|  | spin_lock_irq(&mostek_lock); | 
|  |  | 
|  | tmp = mostek_read(regs + MOSTEK_CREG); | 
|  | tmp |= MSTK_CREG_WRITE; | 
|  | mostek_write(regs + MOSTEK_CREG, tmp); | 
|  |  | 
|  | tmp = mostek_read(regs + MOSTEK_HOUR); | 
|  | tmp &= ~MSTK_KICK_START; | 
|  | mostek_write(regs + MOSTEK_HOUR, tmp); | 
|  |  | 
|  | tmp = mostek_read(regs + MOSTEK_CREG); | 
|  | tmp &= ~MSTK_CREG_WRITE; | 
|  | mostek_write(regs + MOSTEK_CREG, tmp); | 
|  |  | 
|  | spin_unlock_irq(&mostek_lock); | 
|  | } | 
|  |  | 
|  | prom_printf("CLOCK: Kick start procedure successful.\n"); | 
|  | } | 
|  |  | 
|  | /* Return nonzero if the clock chip battery is low. */ | 
|  | static int __init has_low_battery(void) | 
|  | { | 
|  | void __iomem *regs = mstk48t02_regs; | 
|  | u8 data1, data2; | 
|  |  | 
|  | spin_lock_irq(&mostek_lock); | 
|  |  | 
|  | data1 = mostek_read(regs + MOSTEK_EEPROM);	/* Read some data. */ | 
|  | mostek_write(regs + MOSTEK_EEPROM, ~data1);	/* Write back the complement. */ | 
|  | data2 = mostek_read(regs + MOSTEK_EEPROM);	/* Read back the complement. */ | 
|  | mostek_write(regs + MOSTEK_EEPROM, data1);	/* Restore original value. */ | 
|  |  | 
|  | spin_unlock_irq(&mostek_lock); | 
|  |  | 
|  | return (data1 == data2);	/* Was the write blocked? */ | 
|  | } | 
|  |  | 
|  | /* Probe for the real time clock chip. */ | 
|  | static void __init set_system_time(void) | 
|  | { | 
|  | unsigned int year, mon, day, hour, min, sec; | 
|  | void __iomem *mregs = mstk48t02_regs; | 
|  | #ifdef CONFIG_PCI | 
|  | unsigned long dregs = ds1287_regs; | 
|  | #else | 
|  | unsigned long dregs = 0UL; | 
|  | #endif | 
|  | u8 tmp; | 
|  |  | 
|  | if (!mregs && !dregs) { | 
|  | prom_printf("Something wrong, clock regs not mapped yet.\n"); | 
|  | prom_halt(); | 
|  | } | 
|  |  | 
|  | if (mregs) { | 
|  | spin_lock_irq(&mostek_lock); | 
|  |  | 
|  | /* Traditional Mostek chip. */ | 
|  | tmp = mostek_read(mregs + MOSTEK_CREG); | 
|  | tmp |= MSTK_CREG_READ; | 
|  | mostek_write(mregs + MOSTEK_CREG, tmp); | 
|  |  | 
|  | sec = MSTK_REG_SEC(mregs); | 
|  | min = MSTK_REG_MIN(mregs); | 
|  | hour = MSTK_REG_HOUR(mregs); | 
|  | day = MSTK_REG_DOM(mregs); | 
|  | mon = MSTK_REG_MONTH(mregs); | 
|  | year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) ); | 
|  | } else { | 
|  | /* Dallas 12887 RTC chip. */ | 
|  |  | 
|  | do { | 
|  | sec  = CMOS_READ(RTC_SECONDS); | 
|  | min  = CMOS_READ(RTC_MINUTES); | 
|  | hour = CMOS_READ(RTC_HOURS); | 
|  | day  = CMOS_READ(RTC_DAY_OF_MONTH); | 
|  | mon  = CMOS_READ(RTC_MONTH); | 
|  | year = CMOS_READ(RTC_YEAR); | 
|  | } while (sec != CMOS_READ(RTC_SECONDS)); | 
|  |  | 
|  | if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { | 
|  | BCD_TO_BIN(sec); | 
|  | BCD_TO_BIN(min); | 
|  | BCD_TO_BIN(hour); | 
|  | BCD_TO_BIN(day); | 
|  | BCD_TO_BIN(mon); | 
|  | BCD_TO_BIN(year); | 
|  | } | 
|  | if ((year += 1900) < 1970) | 
|  | year += 100; | 
|  | } | 
|  |  | 
|  | xtime.tv_sec = mktime(year, mon, day, hour, min, sec); | 
|  | xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); | 
|  | set_normalized_timespec(&wall_to_monotonic, | 
|  | -xtime.tv_sec, -xtime.tv_nsec); | 
|  |  | 
|  | if (mregs) { | 
|  | tmp = mostek_read(mregs + MOSTEK_CREG); | 
|  | tmp &= ~MSTK_CREG_READ; | 
|  | mostek_write(mregs + MOSTEK_CREG, tmp); | 
|  |  | 
|  | spin_unlock_irq(&mostek_lock); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* davem suggests we keep this within the 4M locked kernel image */ | 
|  | static u32 starfire_get_time(void) | 
|  | { | 
|  | static char obp_gettod[32]; | 
|  | static u32 unix_tod; | 
|  |  | 
|  | sprintf(obp_gettod, "h# %08x unix-gettod", | 
|  | (unsigned int) (long) &unix_tod); | 
|  | prom_feval(obp_gettod); | 
|  |  | 
|  | return unix_tod; | 
|  | } | 
|  |  | 
|  | static int starfire_set_time(u32 val) | 
|  | { | 
|  | /* Do nothing, time is set using the service processor | 
|  | * console on this platform. | 
|  | */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u32 hypervisor_get_time(void) | 
|  | { | 
|  | register unsigned long func asm("%o5"); | 
|  | register unsigned long arg0 asm("%o0"); | 
|  | register unsigned long arg1 asm("%o1"); | 
|  | int retries = 10000; | 
|  |  | 
|  | retry: | 
|  | func = HV_FAST_TOD_GET; | 
|  | arg0 = 0; | 
|  | arg1 = 0; | 
|  | __asm__ __volatile__("ta	%6" | 
|  | : "=&r" (func), "=&r" (arg0), "=&r" (arg1) | 
|  | : "0" (func), "1" (arg0), "2" (arg1), | 
|  | "i" (HV_FAST_TRAP)); | 
|  | if (arg0 == HV_EOK) | 
|  | return arg1; | 
|  | if (arg0 == HV_EWOULDBLOCK) { | 
|  | if (--retries > 0) { | 
|  | udelay(100); | 
|  | goto retry; | 
|  | } | 
|  | printk(KERN_WARNING "SUN4V: tod_get() timed out.\n"); | 
|  | return 0; | 
|  | } | 
|  | printk(KERN_WARNING "SUN4V: tod_get() not supported.\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hypervisor_set_time(u32 secs) | 
|  | { | 
|  | register unsigned long func asm("%o5"); | 
|  | register unsigned long arg0 asm("%o0"); | 
|  | int retries = 10000; | 
|  |  | 
|  | retry: | 
|  | func = HV_FAST_TOD_SET; | 
|  | arg0 = secs; | 
|  | __asm__ __volatile__("ta	%4" | 
|  | : "=&r" (func), "=&r" (arg0) | 
|  | : "0" (func), "1" (arg0), | 
|  | "i" (HV_FAST_TRAP)); | 
|  | if (arg0 == HV_EOK) | 
|  | return 0; | 
|  | if (arg0 == HV_EWOULDBLOCK) { | 
|  | if (--retries > 0) { | 
|  | udelay(100); | 
|  | goto retry; | 
|  | } | 
|  | printk(KERN_WARNING "SUN4V: tod_set() timed out.\n"); | 
|  | return -EAGAIN; | 
|  | } | 
|  | printk(KERN_WARNING "SUN4V: tod_set() not supported.\n"); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | static int __init clock_model_matches(char *model) | 
|  | { | 
|  | if (strcmp(model, "mk48t02") && | 
|  | strcmp(model, "mk48t08") && | 
|  | strcmp(model, "mk48t59") && | 
|  | strcmp(model, "m5819") && | 
|  | strcmp(model, "m5819p") && | 
|  | strcmp(model, "m5823") && | 
|  | strcmp(model, "ds1287")) | 
|  | return 0; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match) | 
|  | { | 
|  | struct device_node *dp = op->node; | 
|  | char *model = of_get_property(dp, "model", NULL); | 
|  | unsigned long size, flags; | 
|  | void __iomem *regs; | 
|  |  | 
|  | if (!model || !clock_model_matches(model)) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* On an Enterprise system there can be multiple mostek clocks. | 
|  | * We should only match the one that is on the central FHC bus. | 
|  | */ | 
|  | if (!strcmp(dp->parent->name, "fhc") && | 
|  | strcmp(dp->parent->parent->name, "central") != 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | size = (op->resource[0].end - op->resource[0].start) + 1; | 
|  | regs = of_ioremap(&op->resource[0], 0, size, "clock"); | 
|  | if (!regs) | 
|  | return -ENOMEM; | 
|  |  | 
|  | #ifdef CONFIG_PCI | 
|  | if (!strcmp(model, "ds1287") || | 
|  | !strcmp(model, "m5819") || | 
|  | !strcmp(model, "m5819p") || | 
|  | !strcmp(model, "m5823")) { | 
|  | ds1287_regs = (unsigned long) regs; | 
|  | } else | 
|  | #endif | 
|  | if (model[5] == '0' && model[6] == '2') { | 
|  | mstk48t02_regs = regs; | 
|  | } else if(model[5] == '0' && model[6] == '8') { | 
|  | mstk48t08_regs = regs; | 
|  | mstk48t02_regs = mstk48t08_regs + MOSTEK_48T08_48T02; | 
|  | } else { | 
|  | mstk48t59_regs = regs; | 
|  | mstk48t02_regs = mstk48t59_regs + MOSTEK_48T59_48T02; | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "%s: Clock regs at %p\n", dp->full_name, regs); | 
|  |  | 
|  | local_irq_save(flags); | 
|  |  | 
|  | if (mstk48t02_regs != NULL) { | 
|  | /* Report a low battery voltage condition. */ | 
|  | if (has_low_battery()) | 
|  | prom_printf("NVRAM: Low battery voltage!\n"); | 
|  |  | 
|  | /* Kick start the clock if it is completely stopped. */ | 
|  | if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP) | 
|  | kick_start_clock(); | 
|  | } | 
|  |  | 
|  | set_system_time(); | 
|  |  | 
|  | local_irq_restore(flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct of_device_id clock_match[] = { | 
|  | { | 
|  | .name = "eeprom", | 
|  | }, | 
|  | { | 
|  | .name = "rtc", | 
|  | }, | 
|  | {}, | 
|  | }; | 
|  |  | 
|  | static struct of_platform_driver clock_driver = { | 
|  | .name		= "clock", | 
|  | .match_table	= clock_match, | 
|  | .probe		= clock_probe, | 
|  | }; | 
|  |  | 
|  | static int __init clock_init(void) | 
|  | { | 
|  | if (this_is_starfire) { | 
|  | xtime.tv_sec = starfire_get_time(); | 
|  | xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); | 
|  | set_normalized_timespec(&wall_to_monotonic, | 
|  | -xtime.tv_sec, -xtime.tv_nsec); | 
|  | return 0; | 
|  | } | 
|  | if (tlb_type == hypervisor) { | 
|  | xtime.tv_sec = hypervisor_get_time(); | 
|  | xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); | 
|  | set_normalized_timespec(&wall_to_monotonic, | 
|  | -xtime.tv_sec, -xtime.tv_nsec); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return of_register_driver(&clock_driver, &of_bus_type); | 
|  | } | 
|  |  | 
|  | /* Must be after subsys_initcall() so that busses are probed.  Must | 
|  | * be before device_initcall() because things like the RTC driver | 
|  | * need to see the clock registers. | 
|  | */ | 
|  | fs_initcall(clock_init); | 
|  |  | 
|  | /* This is gets the master TICK_INT timer going. */ | 
|  | static unsigned long sparc64_init_timers(void) | 
|  | { | 
|  | struct device_node *dp; | 
|  | struct property *prop; | 
|  | unsigned long clock; | 
|  | #ifdef CONFIG_SMP | 
|  | extern void smp_tick_init(void); | 
|  | #endif | 
|  |  | 
|  | dp = of_find_node_by_path("/"); | 
|  | if (tlb_type == spitfire) { | 
|  | unsigned long ver, manuf, impl; | 
|  |  | 
|  | __asm__ __volatile__ ("rdpr %%ver, %0" | 
|  | : "=&r" (ver)); | 
|  | manuf = ((ver >> 48) & 0xffff); | 
|  | impl = ((ver >> 32) & 0xffff); | 
|  | if (manuf == 0x17 && impl == 0x13) { | 
|  | /* Hummingbird, aka Ultra-IIe */ | 
|  | tick_ops = &hbtick_operations; | 
|  | prop = of_find_property(dp, "stick-frequency", NULL); | 
|  | } else { | 
|  | tick_ops = &tick_operations; | 
|  | cpu_find_by_instance(0, &dp, NULL); | 
|  | prop = of_find_property(dp, "clock-frequency", NULL); | 
|  | } | 
|  | } else { | 
|  | tick_ops = &stick_operations; | 
|  | prop = of_find_property(dp, "stick-frequency", NULL); | 
|  | } | 
|  | clock = *(unsigned int *) prop->value; | 
|  | timer_tick_offset = clock / HZ; | 
|  |  | 
|  | #ifdef CONFIG_SMP | 
|  | smp_tick_init(); | 
|  | #endif | 
|  |  | 
|  | return clock; | 
|  | } | 
|  |  | 
|  | static void sparc64_start_timers(void) | 
|  | { | 
|  | unsigned long pstate; | 
|  |  | 
|  | /* Guarantee that the following sequences execute | 
|  | * uninterrupted. | 
|  | */ | 
|  | __asm__ __volatile__("rdpr	%%pstate, %0\n\t" | 
|  | "wrpr	%0, %1, %%pstate" | 
|  | : "=r" (pstate) | 
|  | : "i" (PSTATE_IE)); | 
|  |  | 
|  | tick_ops->init_tick(timer_tick_offset); | 
|  |  | 
|  | /* Restore PSTATE_IE. */ | 
|  | __asm__ __volatile__("wrpr	%0, 0x0, %%pstate" | 
|  | : /* no outputs */ | 
|  | : "r" (pstate)); | 
|  | } | 
|  |  | 
|  | struct freq_table { | 
|  | unsigned long clock_tick_ref; | 
|  | unsigned int ref_freq; | 
|  | }; | 
|  | static DEFINE_PER_CPU(struct freq_table, sparc64_freq_table) = { 0, 0 }; | 
|  |  | 
|  | unsigned long sparc64_get_clock_tick(unsigned int cpu) | 
|  | { | 
|  | struct freq_table *ft = &per_cpu(sparc64_freq_table, cpu); | 
|  |  | 
|  | if (ft->clock_tick_ref) | 
|  | return ft->clock_tick_ref; | 
|  | return cpu_data(cpu).clock_tick; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_CPU_FREQ | 
|  |  | 
|  | static int sparc64_cpufreq_notifier(struct notifier_block *nb, unsigned long val, | 
|  | void *data) | 
|  | { | 
|  | struct cpufreq_freqs *freq = data; | 
|  | unsigned int cpu = freq->cpu; | 
|  | struct freq_table *ft = &per_cpu(sparc64_freq_table, cpu); | 
|  |  | 
|  | if (!ft->ref_freq) { | 
|  | ft->ref_freq = freq->old; | 
|  | ft->clock_tick_ref = cpu_data(cpu).clock_tick; | 
|  | } | 
|  | if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) || | 
|  | (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || | 
|  | (val == CPUFREQ_RESUMECHANGE)) { | 
|  | cpu_data(cpu).clock_tick = | 
|  | cpufreq_scale(ft->clock_tick_ref, | 
|  | ft->ref_freq, | 
|  | freq->new); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct notifier_block sparc64_cpufreq_notifier_block = { | 
|  | .notifier_call	= sparc64_cpufreq_notifier | 
|  | }; | 
|  |  | 
|  | #endif /* CONFIG_CPU_FREQ */ | 
|  |  | 
|  | static struct time_interpolator sparc64_cpu_interpolator = { | 
|  | .source		=	TIME_SOURCE_CPU, | 
|  | .shift		=	16, | 
|  | .mask		=	0xffffffffffffffffLL | 
|  | }; | 
|  |  | 
|  | /* The quotient formula is taken from the IA64 port. */ | 
|  | #define SPARC64_NSEC_PER_CYC_SHIFT	10UL | 
|  | void __init time_init(void) | 
|  | { | 
|  | unsigned long clock = sparc64_init_timers(); | 
|  |  | 
|  | sparc64_cpu_interpolator.frequency = clock; | 
|  | register_time_interpolator(&sparc64_cpu_interpolator); | 
|  |  | 
|  | /* Now that the interpolator is registered, it is | 
|  | * safe to start the timer ticking. | 
|  | */ | 
|  | sparc64_start_timers(); | 
|  |  | 
|  | timer_ticks_per_nsec_quotient = | 
|  | (((NSEC_PER_SEC << SPARC64_NSEC_PER_CYC_SHIFT) + | 
|  | (clock / 2)) / clock); | 
|  |  | 
|  | #ifdef CONFIG_CPU_FREQ | 
|  | cpufreq_register_notifier(&sparc64_cpufreq_notifier_block, | 
|  | CPUFREQ_TRANSITION_NOTIFIER); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | unsigned long long sched_clock(void) | 
|  | { | 
|  | unsigned long ticks = tick_ops->get_tick(); | 
|  |  | 
|  | return (ticks * timer_ticks_per_nsec_quotient) | 
|  | >> SPARC64_NSEC_PER_CYC_SHIFT; | 
|  | } | 
|  |  | 
|  | static int set_rtc_mmss(unsigned long nowtime) | 
|  | { | 
|  | int real_seconds, real_minutes, chip_minutes; | 
|  | void __iomem *mregs = mstk48t02_regs; | 
|  | #ifdef CONFIG_PCI | 
|  | unsigned long dregs = ds1287_regs; | 
|  | #else | 
|  | unsigned long dregs = 0UL; | 
|  | #endif | 
|  | unsigned long flags; | 
|  | u8 tmp; | 
|  |  | 
|  | /* | 
|  | * Not having a register set can lead to trouble. | 
|  | * Also starfire doesn't have a tod clock. | 
|  | */ | 
|  | if (!mregs && !dregs) | 
|  | return -1; | 
|  |  | 
|  | if (mregs) { | 
|  | spin_lock_irqsave(&mostek_lock, flags); | 
|  |  | 
|  | /* Read the current RTC minutes. */ | 
|  | tmp = mostek_read(mregs + MOSTEK_CREG); | 
|  | tmp |= MSTK_CREG_READ; | 
|  | mostek_write(mregs + MOSTEK_CREG, tmp); | 
|  |  | 
|  | chip_minutes = MSTK_REG_MIN(mregs); | 
|  |  | 
|  | tmp = mostek_read(mregs + MOSTEK_CREG); | 
|  | tmp &= ~MSTK_CREG_READ; | 
|  | mostek_write(mregs + MOSTEK_CREG, tmp); | 
|  |  | 
|  | /* | 
|  | * since we're only adjusting minutes and seconds, | 
|  | * don't interfere with hour overflow. This avoids | 
|  | * messing with unknown time zones but requires your | 
|  | * RTC not to be off by more than 15 minutes | 
|  | */ | 
|  | real_seconds = nowtime % 60; | 
|  | real_minutes = nowtime / 60; | 
|  | if (((abs(real_minutes - chip_minutes) + 15)/30) & 1) | 
|  | real_minutes += 30;	/* correct for half hour time zone */ | 
|  | real_minutes %= 60; | 
|  |  | 
|  | if (abs(real_minutes - chip_minutes) < 30) { | 
|  | tmp = mostek_read(mregs + MOSTEK_CREG); | 
|  | tmp |= MSTK_CREG_WRITE; | 
|  | mostek_write(mregs + MOSTEK_CREG, tmp); | 
|  |  | 
|  | MSTK_SET_REG_SEC(mregs,real_seconds); | 
|  | MSTK_SET_REG_MIN(mregs,real_minutes); | 
|  |  | 
|  | tmp = mostek_read(mregs + MOSTEK_CREG); | 
|  | tmp &= ~MSTK_CREG_WRITE; | 
|  | mostek_write(mregs + MOSTEK_CREG, tmp); | 
|  |  | 
|  | spin_unlock_irqrestore(&mostek_lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } else { | 
|  | spin_unlock_irqrestore(&mostek_lock, flags); | 
|  |  | 
|  | return -1; | 
|  | } | 
|  | } else { | 
|  | int retval = 0; | 
|  | unsigned char save_control, save_freq_select; | 
|  |  | 
|  | /* Stolen from arch/i386/kernel/time.c, see there for | 
|  | * credits and descriptive comments. | 
|  | */ | 
|  | spin_lock_irqsave(&rtc_lock, flags); | 
|  | save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ | 
|  | CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); | 
|  |  | 
|  | save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ | 
|  | CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); | 
|  |  | 
|  | chip_minutes = CMOS_READ(RTC_MINUTES); | 
|  | if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) | 
|  | BCD_TO_BIN(chip_minutes); | 
|  | real_seconds = nowtime % 60; | 
|  | real_minutes = nowtime / 60; | 
|  | if (((abs(real_minutes - chip_minutes) + 15)/30) & 1) | 
|  | real_minutes += 30; | 
|  | real_minutes %= 60; | 
|  |  | 
|  | if (abs(real_minutes - chip_minutes) < 30) { | 
|  | if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { | 
|  | BIN_TO_BCD(real_seconds); | 
|  | BIN_TO_BCD(real_minutes); | 
|  | } | 
|  | CMOS_WRITE(real_seconds,RTC_SECONDS); | 
|  | CMOS_WRITE(real_minutes,RTC_MINUTES); | 
|  | } else { | 
|  | printk(KERN_WARNING | 
|  | "set_rtc_mmss: can't update from %d to %d\n", | 
|  | chip_minutes, real_minutes); | 
|  | retval = -1; | 
|  | } | 
|  |  | 
|  | CMOS_WRITE(save_control, RTC_CONTROL); | 
|  | CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); | 
|  | spin_unlock_irqrestore(&rtc_lock, flags); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  | } | 
|  |  | 
|  | #define RTC_IS_OPEN		0x01	/* means /dev/rtc is in use	*/ | 
|  | static unsigned char mini_rtc_status;	/* bitmapped status byte.	*/ | 
|  |  | 
|  | /* months start at 0 now */ | 
|  | static unsigned char days_in_mo[] = | 
|  | {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; | 
|  |  | 
|  | #define FEBRUARY	2 | 
|  | #define	STARTOFTIME	1970 | 
|  | #define SECDAY		86400L | 
|  | #define SECYR		(SECDAY * 365) | 
|  | #define	leapyear(year)		((year) % 4 == 0 && \ | 
|  | ((year) % 100 != 0 || (year) % 400 == 0)) | 
|  | #define	days_in_year(a) 	(leapyear(a) ? 366 : 365) | 
|  | #define	days_in_month(a) 	(month_days[(a) - 1]) | 
|  |  | 
|  | static int month_days[12] = { | 
|  | 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * This only works for the Gregorian calendar - i.e. after 1752 (in the UK) | 
|  | */ | 
|  | static void GregorianDay(struct rtc_time * tm) | 
|  | { | 
|  | int leapsToDate; | 
|  | int lastYear; | 
|  | int day; | 
|  | int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 }; | 
|  |  | 
|  | lastYear = tm->tm_year - 1; | 
|  |  | 
|  | /* | 
|  | * Number of leap corrections to apply up to end of last year | 
|  | */ | 
|  | leapsToDate = lastYear / 4 - lastYear / 100 + lastYear / 400; | 
|  |  | 
|  | /* | 
|  | * This year is a leap year if it is divisible by 4 except when it is | 
|  | * divisible by 100 unless it is divisible by 400 | 
|  | * | 
|  | * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 was | 
|  | */ | 
|  | day = tm->tm_mon > 2 && leapyear(tm->tm_year); | 
|  |  | 
|  | day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] + | 
|  | tm->tm_mday; | 
|  |  | 
|  | tm->tm_wday = day % 7; | 
|  | } | 
|  |  | 
|  | static void to_tm(int tim, struct rtc_time *tm) | 
|  | { | 
|  | register int    i; | 
|  | register long   hms, day; | 
|  |  | 
|  | day = tim / SECDAY; | 
|  | hms = tim % SECDAY; | 
|  |  | 
|  | /* Hours, minutes, seconds are easy */ | 
|  | tm->tm_hour = hms / 3600; | 
|  | tm->tm_min = (hms % 3600) / 60; | 
|  | tm->tm_sec = (hms % 3600) % 60; | 
|  |  | 
|  | /* Number of years in days */ | 
|  | for (i = STARTOFTIME; day >= days_in_year(i); i++) | 
|  | day -= days_in_year(i); | 
|  | tm->tm_year = i; | 
|  |  | 
|  | /* Number of months in days left */ | 
|  | if (leapyear(tm->tm_year)) | 
|  | days_in_month(FEBRUARY) = 29; | 
|  | for (i = 1; day >= days_in_month(i); i++) | 
|  | day -= days_in_month(i); | 
|  | days_in_month(FEBRUARY) = 28; | 
|  | tm->tm_mon = i; | 
|  |  | 
|  | /* Days are what is left over (+1) from all that. */ | 
|  | tm->tm_mday = day + 1; | 
|  |  | 
|  | /* | 
|  | * Determine the day of week | 
|  | */ | 
|  | GregorianDay(tm); | 
|  | } | 
|  |  | 
|  | /* Both Starfire and SUN4V give us seconds since Jan 1st, 1970, | 
|  | * aka Unix time.  So we have to convert to/from rtc_time. | 
|  | */ | 
|  | static inline void mini_get_rtc_time(struct rtc_time *time) | 
|  | { | 
|  | unsigned long flags; | 
|  | u32 seconds; | 
|  |  | 
|  | spin_lock_irqsave(&rtc_lock, flags); | 
|  | seconds = 0; | 
|  | if (this_is_starfire) | 
|  | seconds = starfire_get_time(); | 
|  | else if (tlb_type == hypervisor) | 
|  | seconds = hypervisor_get_time(); | 
|  | spin_unlock_irqrestore(&rtc_lock, flags); | 
|  |  | 
|  | to_tm(seconds, time); | 
|  | time->tm_year -= 1900; | 
|  | time->tm_mon -= 1; | 
|  | } | 
|  |  | 
|  | static inline int mini_set_rtc_time(struct rtc_time *time) | 
|  | { | 
|  | u32 seconds = mktime(time->tm_year + 1900, time->tm_mon + 1, | 
|  | time->tm_mday, time->tm_hour, | 
|  | time->tm_min, time->tm_sec); | 
|  | unsigned long flags; | 
|  | int err; | 
|  |  | 
|  | spin_lock_irqsave(&rtc_lock, flags); | 
|  | err = -ENODEV; | 
|  | if (this_is_starfire) | 
|  | err = starfire_set_time(seconds); | 
|  | else  if (tlb_type == hypervisor) | 
|  | err = hypervisor_set_time(seconds); | 
|  | spin_unlock_irqrestore(&rtc_lock, flags); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int mini_rtc_ioctl(struct inode *inode, struct file *file, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct rtc_time wtime; | 
|  | void __user *argp = (void __user *)arg; | 
|  |  | 
|  | switch (cmd) { | 
|  |  | 
|  | case RTC_PLL_GET: | 
|  | return -EINVAL; | 
|  |  | 
|  | case RTC_PLL_SET: | 
|  | return -EINVAL; | 
|  |  | 
|  | case RTC_UIE_OFF:	/* disable ints from RTC updates.	*/ | 
|  | return 0; | 
|  |  | 
|  | case RTC_UIE_ON:	/* enable ints for RTC updates.	*/ | 
|  | return -EINVAL; | 
|  |  | 
|  | case RTC_RD_TIME:	/* Read the time/date from RTC	*/ | 
|  | /* this doesn't get week-day, who cares */ | 
|  | memset(&wtime, 0, sizeof(wtime)); | 
|  | mini_get_rtc_time(&wtime); | 
|  |  | 
|  | return copy_to_user(argp, &wtime, sizeof(wtime)) ? -EFAULT : 0; | 
|  |  | 
|  | case RTC_SET_TIME:	/* Set the RTC */ | 
|  | { | 
|  | int year; | 
|  | unsigned char leap_yr; | 
|  |  | 
|  | if (!capable(CAP_SYS_TIME)) | 
|  | return -EACCES; | 
|  |  | 
|  | if (copy_from_user(&wtime, argp, sizeof(wtime))) | 
|  | return -EFAULT; | 
|  |  | 
|  | year = wtime.tm_year + 1900; | 
|  | leap_yr = ((!(year % 4) && (year % 100)) || | 
|  | !(year % 400)); | 
|  |  | 
|  | if ((wtime.tm_mon < 0 || wtime.tm_mon > 11) || (wtime.tm_mday < 1)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (wtime.tm_mday < 0 || wtime.tm_mday > | 
|  | (days_in_mo[wtime.tm_mon] + ((wtime.tm_mon == 1) && leap_yr))) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (wtime.tm_hour < 0 || wtime.tm_hour >= 24 || | 
|  | wtime.tm_min < 0 || wtime.tm_min >= 60 || | 
|  | wtime.tm_sec < 0 || wtime.tm_sec >= 60) | 
|  | return -EINVAL; | 
|  |  | 
|  | return mini_set_rtc_time(&wtime); | 
|  | } | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int mini_rtc_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | if (mini_rtc_status & RTC_IS_OPEN) | 
|  | return -EBUSY; | 
|  |  | 
|  | mini_rtc_status |= RTC_IS_OPEN; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mini_rtc_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | mini_rtc_status &= ~RTC_IS_OPEN; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct file_operations mini_rtc_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .ioctl		= mini_rtc_ioctl, | 
|  | .open		= mini_rtc_open, | 
|  | .release	= mini_rtc_release, | 
|  | }; | 
|  |  | 
|  | static struct miscdevice rtc_mini_dev = | 
|  | { | 
|  | .minor		= RTC_MINOR, | 
|  | .name		= "rtc", | 
|  | .fops		= &mini_rtc_fops, | 
|  | }; | 
|  |  | 
|  | static int __init rtc_mini_init(void) | 
|  | { | 
|  | int retval; | 
|  |  | 
|  | if (tlb_type != hypervisor && !this_is_starfire) | 
|  | return -ENODEV; | 
|  |  | 
|  | printk(KERN_INFO "Mini RTC Driver\n"); | 
|  |  | 
|  | retval = misc_register(&rtc_mini_dev); | 
|  | if (retval < 0) | 
|  | return retval; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit rtc_mini_exit(void) | 
|  | { | 
|  | misc_deregister(&rtc_mini_dev); | 
|  | } | 
|  |  | 
|  |  | 
|  | module_init(rtc_mini_init); | 
|  | module_exit(rtc_mini_exit); |