| /* | 
 |  *  net/dccp/feat.c | 
 |  * | 
 |  *  Feature negotiation for the DCCP protocol (RFC 4340, section 6) | 
 |  * | 
 |  *  Copyright (c) 2008 Gerrit Renker <gerrit@erg.abdn.ac.uk> | 
 |  *  Rewrote from scratch, some bits from earlier code by | 
 |  *  Copyright (c) 2005 Andrea Bittau <a.bittau@cs.ucl.ac.uk> | 
 |  * | 
 |  * | 
 |  *  ASSUMPTIONS | 
 |  *  ----------- | 
 |  *  o Feature negotiation is coordinated with connection setup (as in TCP), wild | 
 |  *    changes of parameters of an established connection are not supported. | 
 |  *  o All currently known SP features have 1-byte quantities. If in the future | 
 |  *    extensions of RFCs 4340..42 define features with item lengths larger than | 
 |  *    one byte, a feature-specific extension of the code will be required. | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or | 
 |  *  modify it under the terms of the GNU General Public License | 
 |  *  as published by the Free Software Foundation; either version | 
 |  *  2 of the License, or (at your option) any later version. | 
 |  */ | 
 | #include <linux/module.h> | 
 | #include "ccid.h" | 
 | #include "feat.h" | 
 |  | 
 | /* | 
 |  * Feature activation handlers. | 
 |  * | 
 |  * These all use an u64 argument, to provide enough room for NN/SP features. At | 
 |  * this stage the negotiated values have been checked to be within their range. | 
 |  */ | 
 | static int dccp_hdlr_ccid(struct sock *sk, u64 ccid, bool rx) | 
 | { | 
 | 	struct dccp_sock *dp = dccp_sk(sk); | 
 | 	struct ccid *new_ccid = ccid_new(ccid, sk, rx); | 
 |  | 
 | 	if (new_ccid == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	if (rx) { | 
 | 		ccid_hc_rx_delete(dp->dccps_hc_rx_ccid, sk); | 
 | 		dp->dccps_hc_rx_ccid = new_ccid; | 
 | 	} else { | 
 | 		ccid_hc_tx_delete(dp->dccps_hc_tx_ccid, sk); | 
 | 		dp->dccps_hc_tx_ccid = new_ccid; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dccp_hdlr_seq_win(struct sock *sk, u64 seq_win, bool rx) | 
 | { | 
 | 	if (!rx) | 
 | 		dccp_msk(sk)->dccpms_sequence_window = seq_win; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dccp_hdlr_ack_ratio(struct sock *sk, u64 ratio, bool rx) | 
 | { | 
 | 	if (rx) | 
 | 		dccp_sk(sk)->dccps_r_ack_ratio = ratio; | 
 | 	else | 
 | 		dccp_sk(sk)->dccps_l_ack_ratio = ratio; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dccp_hdlr_ackvec(struct sock *sk, u64 enable, bool rx) | 
 | { | 
 | 	struct dccp_sock *dp = dccp_sk(sk); | 
 |  | 
 | 	if (rx) { | 
 | 		if (enable && dp->dccps_hc_rx_ackvec == NULL) { | 
 | 			dp->dccps_hc_rx_ackvec = dccp_ackvec_alloc(gfp_any()); | 
 | 			if (dp->dccps_hc_rx_ackvec == NULL) | 
 | 				return -ENOMEM; | 
 | 		} else if (!enable) { | 
 | 			dccp_ackvec_free(dp->dccps_hc_rx_ackvec); | 
 | 			dp->dccps_hc_rx_ackvec = NULL; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dccp_hdlr_ndp(struct sock *sk, u64 enable, bool rx) | 
 | { | 
 | 	if (!rx) | 
 | 		dccp_sk(sk)->dccps_send_ndp_count = (enable > 0); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Minimum Checksum Coverage is located at the RX side (9.2.1). This means that | 
 |  * `rx' holds when the sending peer informs about his partial coverage via a | 
 |  * ChangeR() option. In the other case, we are the sender and the receiver | 
 |  * announces its coverage via ChangeL() options. The policy here is to honour | 
 |  * such communication by enabling the corresponding partial coverage - but only | 
 |  * if it has not been set manually before; the warning here means that all | 
 |  * packets will be dropped. | 
 |  */ | 
 | static int dccp_hdlr_min_cscov(struct sock *sk, u64 cscov, bool rx) | 
 | { | 
 | 	struct dccp_sock *dp = dccp_sk(sk); | 
 |  | 
 | 	if (rx) | 
 | 		dp->dccps_pcrlen = cscov; | 
 | 	else { | 
 | 		if (dp->dccps_pcslen == 0) | 
 | 			dp->dccps_pcslen = cscov; | 
 | 		else if (cscov > dp->dccps_pcslen) | 
 | 			DCCP_WARN("CsCov %u too small, peer requires >= %u\n", | 
 | 				  dp->dccps_pcslen, (u8)cscov); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct { | 
 | 	u8			feat_num;		/* DCCPF_xxx */ | 
 | 	enum dccp_feat_type	rxtx;			/* RX or TX  */ | 
 | 	enum dccp_feat_type	reconciliation;		/* SP or NN  */ | 
 | 	u8			default_value;		/* as in 6.4 */ | 
 | 	int (*activation_hdlr)(struct sock *sk, u64 val, bool rx); | 
 | /* | 
 |  *    Lookup table for location and type of features (from RFC 4340/4342) | 
 |  *  +--------------------------+----+-----+----+----+---------+-----------+ | 
 |  *  | Feature                  | Location | Reconc. | Initial |  Section  | | 
 |  *  |                          | RX | TX  | SP | NN |  Value  | Reference | | 
 |  *  +--------------------------+----+-----+----+----+---------+-----------+ | 
 |  *  | DCCPF_CCID               |    |  X  | X  |    |   2     | 10        | | 
 |  *  | DCCPF_SHORT_SEQNOS       |    |  X  | X  |    |   0     |  7.6.1    | | 
 |  *  | DCCPF_SEQUENCE_WINDOW    |    |  X  |    | X  | 100     |  7.5.2    | | 
 |  *  | DCCPF_ECN_INCAPABLE      | X  |     | X  |    |   0     | 12.1      | | 
 |  *  | DCCPF_ACK_RATIO          |    |  X  |    | X  |   2     | 11.3      | | 
 |  *  | DCCPF_SEND_ACK_VECTOR    | X  |     | X  |    |   0     | 11.5      | | 
 |  *  | DCCPF_SEND_NDP_COUNT     |    |  X  | X  |    |   0     |  7.7.2    | | 
 |  *  | DCCPF_MIN_CSUM_COVER     | X  |     | X  |    |   0     |  9.2.1    | | 
 |  *  | DCCPF_DATA_CHECKSUM      | X  |     | X  |    |   0     |  9.3.1    | | 
 |  *  | DCCPF_SEND_LEV_RATE      | X  |     | X  |    |   0     | 4342/8.4  | | 
 |  *  +--------------------------+----+-----+----+----+---------+-----------+ | 
 |  */ | 
 | } dccp_feat_table[] = { | 
 | 	{ DCCPF_CCID,		 FEAT_AT_TX, FEAT_SP, 2,   dccp_hdlr_ccid     }, | 
 | 	{ DCCPF_SHORT_SEQNOS,	 FEAT_AT_TX, FEAT_SP, 0,   NULL }, | 
 | 	{ DCCPF_SEQUENCE_WINDOW, FEAT_AT_TX, FEAT_NN, 100, dccp_hdlr_seq_win  }, | 
 | 	{ DCCPF_ECN_INCAPABLE,	 FEAT_AT_RX, FEAT_SP, 0,   NULL }, | 
 | 	{ DCCPF_ACK_RATIO,	 FEAT_AT_TX, FEAT_NN, 2,   dccp_hdlr_ack_ratio}, | 
 | 	{ DCCPF_SEND_ACK_VECTOR, FEAT_AT_RX, FEAT_SP, 0,   dccp_hdlr_ackvec   }, | 
 | 	{ DCCPF_SEND_NDP_COUNT,  FEAT_AT_TX, FEAT_SP, 0,   dccp_hdlr_ndp      }, | 
 | 	{ DCCPF_MIN_CSUM_COVER,  FEAT_AT_RX, FEAT_SP, 0,   dccp_hdlr_min_cscov}, | 
 | 	{ DCCPF_DATA_CHECKSUM,	 FEAT_AT_RX, FEAT_SP, 0,   NULL }, | 
 | 	{ DCCPF_SEND_LEV_RATE,	 FEAT_AT_RX, FEAT_SP, 0,   NULL }, | 
 | }; | 
 | #define DCCP_FEAT_SUPPORTED_MAX		ARRAY_SIZE(dccp_feat_table) | 
 |  | 
 | /** | 
 |  * dccp_feat_index  -  Hash function to map feature number into array position | 
 |  * Returns consecutive array index or -1 if the feature is not understood. | 
 |  */ | 
 | static int dccp_feat_index(u8 feat_num) | 
 | { | 
 | 	/* The first 9 entries are occupied by the types from RFC 4340, 6.4 */ | 
 | 	if (feat_num > DCCPF_RESERVED && feat_num <= DCCPF_DATA_CHECKSUM) | 
 | 		return feat_num - 1; | 
 |  | 
 | 	/* | 
 | 	 * Other features: add cases for new feature types here after adding | 
 | 	 * them to the above table. | 
 | 	 */ | 
 | 	switch (feat_num) { | 
 | 	case DCCPF_SEND_LEV_RATE: | 
 | 			return DCCP_FEAT_SUPPORTED_MAX - 1; | 
 | 	} | 
 | 	return -1; | 
 | } | 
 |  | 
 | static u8 dccp_feat_type(u8 feat_num) | 
 | { | 
 | 	int idx = dccp_feat_index(feat_num); | 
 |  | 
 | 	if (idx < 0) | 
 | 		return FEAT_UNKNOWN; | 
 | 	return dccp_feat_table[idx].reconciliation; | 
 | } | 
 |  | 
 | static int dccp_feat_default_value(u8 feat_num) | 
 | { | 
 | 	int idx = dccp_feat_index(feat_num); | 
 | 	/* | 
 | 	 * There are no default values for unknown features, so encountering a | 
 | 	 * negative index here indicates a serious problem somewhere else. | 
 | 	 */ | 
 | 	DCCP_BUG_ON(idx < 0); | 
 |  | 
 | 	return idx < 0 ? 0 : dccp_feat_table[idx].default_value; | 
 | } | 
 |  | 
 | static int __dccp_feat_activate(struct sock *sk, const int idx, | 
 | 				const bool is_local, dccp_feat_val const *fval) | 
 | { | 
 | 	bool rx; | 
 | 	u64 val; | 
 |  | 
 | 	if (idx < 0 || idx >= DCCP_FEAT_SUPPORTED_MAX) | 
 | 		return -1; | 
 | 	if (dccp_feat_table[idx].activation_hdlr == NULL) | 
 | 		return 0; | 
 |  | 
 | 	if (fval == NULL) { | 
 | 		val = dccp_feat_table[idx].default_value; | 
 | 	} else if (dccp_feat_table[idx].reconciliation == FEAT_SP) { | 
 | 		if (fval->sp.vec == NULL) { | 
 | 			/* | 
 | 			 * This can happen when an empty Confirm is sent | 
 | 			 * for an SP (i.e. known) feature. In this case | 
 | 			 * we would be using the default anyway. | 
 | 			 */ | 
 | 			DCCP_CRIT("Feature #%d undefined: using default", idx); | 
 | 			val = dccp_feat_table[idx].default_value; | 
 | 		} else { | 
 | 			val = fval->sp.vec[0]; | 
 | 		} | 
 | 	} else { | 
 | 		val = fval->nn; | 
 | 	} | 
 |  | 
 | 	/* Location is RX if this is a local-RX or remote-TX feature */ | 
 | 	rx = (is_local == (dccp_feat_table[idx].rxtx == FEAT_AT_RX)); | 
 |  | 
 | 	return dccp_feat_table[idx].activation_hdlr(sk, val, rx); | 
 | } | 
 |  | 
 | /* Test for "Req'd" feature (RFC 4340, 6.4) */ | 
 | static inline int dccp_feat_must_be_understood(u8 feat_num) | 
 | { | 
 | 	return	feat_num == DCCPF_CCID || feat_num == DCCPF_SHORT_SEQNOS || | 
 | 		feat_num == DCCPF_SEQUENCE_WINDOW; | 
 | } | 
 |  | 
 | /* copy constructor, fval must not already contain allocated memory */ | 
 | static int dccp_feat_clone_sp_val(dccp_feat_val *fval, u8 const *val, u8 len) | 
 | { | 
 | 	fval->sp.len = len; | 
 | 	if (fval->sp.len > 0) { | 
 | 		fval->sp.vec = kmemdup(val, len, gfp_any()); | 
 | 		if (fval->sp.vec == NULL) { | 
 | 			fval->sp.len = 0; | 
 | 			return -ENOBUFS; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void dccp_feat_val_destructor(u8 feat_num, dccp_feat_val *val) | 
 | { | 
 | 	if (unlikely(val == NULL)) | 
 | 		return; | 
 | 	if (dccp_feat_type(feat_num) == FEAT_SP) | 
 | 		kfree(val->sp.vec); | 
 | 	memset(val, 0, sizeof(*val)); | 
 | } | 
 |  | 
 | static struct dccp_feat_entry * | 
 | 	      dccp_feat_clone_entry(struct dccp_feat_entry const *original) | 
 | { | 
 | 	struct dccp_feat_entry *new; | 
 | 	u8 type = dccp_feat_type(original->feat_num); | 
 |  | 
 | 	if (type == FEAT_UNKNOWN) | 
 | 		return NULL; | 
 |  | 
 | 	new = kmemdup(original, sizeof(struct dccp_feat_entry), gfp_any()); | 
 | 	if (new == NULL) | 
 | 		return NULL; | 
 |  | 
 | 	if (type == FEAT_SP && dccp_feat_clone_sp_val(&new->val, | 
 | 						      original->val.sp.vec, | 
 | 						      original->val.sp.len)) { | 
 | 		kfree(new); | 
 | 		return NULL; | 
 | 	} | 
 | 	return new; | 
 | } | 
 |  | 
 | static void dccp_feat_entry_destructor(struct dccp_feat_entry *entry) | 
 | { | 
 | 	if (entry != NULL) { | 
 | 		dccp_feat_val_destructor(entry->feat_num, &entry->val); | 
 | 		kfree(entry); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * List management functions | 
 |  * | 
 |  * Feature negotiation lists rely on and maintain the following invariants: | 
 |  * - each feat_num in the list is known, i.e. we know its type and default value | 
 |  * - each feat_num/is_local combination is unique (old entries are overwritten) | 
 |  * - SP values are always freshly allocated | 
 |  * - list is sorted in increasing order of feature number (faster lookup) | 
 |  */ | 
 | static struct dccp_feat_entry *dccp_feat_list_lookup(struct list_head *fn_list, | 
 | 						     u8 feat_num, bool is_local) | 
 | { | 
 | 	struct dccp_feat_entry *entry; | 
 |  | 
 | 	list_for_each_entry(entry, fn_list, node) { | 
 | 		if (entry->feat_num == feat_num && entry->is_local == is_local) | 
 | 			return entry; | 
 | 		else if (entry->feat_num > feat_num) | 
 | 			break; | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_entry_new  -  Central list update routine (called by all others) | 
 |  * @head:  list to add to | 
 |  * @feat:  feature number | 
 |  * @local: whether the local (1) or remote feature with number @feat is meant | 
 |  * This is the only constructor and serves to ensure the above invariants. | 
 |  */ | 
 | static struct dccp_feat_entry * | 
 | 	      dccp_feat_entry_new(struct list_head *head, u8 feat, bool local) | 
 | { | 
 | 	struct dccp_feat_entry *entry; | 
 |  | 
 | 	list_for_each_entry(entry, head, node) | 
 | 		if (entry->feat_num == feat && entry->is_local == local) { | 
 | 			dccp_feat_val_destructor(entry->feat_num, &entry->val); | 
 | 			return entry; | 
 | 		} else if (entry->feat_num > feat) { | 
 | 			head = &entry->node; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 	entry = kmalloc(sizeof(*entry), gfp_any()); | 
 | 	if (entry != NULL) { | 
 | 		entry->feat_num = feat; | 
 | 		entry->is_local = local; | 
 | 		list_add_tail(&entry->node, head); | 
 | 	} | 
 | 	return entry; | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_push_change  -  Add/overwrite a Change option in the list | 
 |  * @fn_list: feature-negotiation list to update | 
 |  * @feat: one of %dccp_feature_numbers | 
 |  * @local: whether local (1) or remote (0) @feat_num is meant | 
 |  * @needs_mandatory: whether to use Mandatory feature negotiation options | 
 |  * @fval: pointer to NN/SP value to be inserted (will be copied) | 
 |  */ | 
 | static int dccp_feat_push_change(struct list_head *fn_list, u8 feat, u8 local, | 
 | 				 u8 mandatory, dccp_feat_val *fval) | 
 | { | 
 | 	struct dccp_feat_entry *new = dccp_feat_entry_new(fn_list, feat, local); | 
 |  | 
 | 	if (new == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	new->feat_num	     = feat; | 
 | 	new->is_local	     = local; | 
 | 	new->state	     = FEAT_INITIALISING; | 
 | 	new->needs_confirm   = 0; | 
 | 	new->empty_confirm   = 0; | 
 | 	new->val	     = *fval; | 
 | 	new->needs_mandatory = mandatory; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_push_confirm  -  Add a Confirm entry to the FN list | 
 |  * @fn_list: feature-negotiation list to add to | 
 |  * @feat: one of %dccp_feature_numbers | 
 |  * @local: whether local (1) or remote (0) @feat_num is being confirmed | 
 |  * @fval: pointer to NN/SP value to be inserted or NULL | 
 |  * Returns 0 on success, a Reset code for further processing otherwise. | 
 |  */ | 
 | static int dccp_feat_push_confirm(struct list_head *fn_list, u8 feat, u8 local, | 
 | 				  dccp_feat_val *fval) | 
 | { | 
 | 	struct dccp_feat_entry *new = dccp_feat_entry_new(fn_list, feat, local); | 
 |  | 
 | 	if (new == NULL) | 
 | 		return DCCP_RESET_CODE_TOO_BUSY; | 
 |  | 
 | 	new->feat_num	     = feat; | 
 | 	new->is_local	     = local; | 
 | 	new->state	     = FEAT_STABLE;	/* transition in 6.6.2 */ | 
 | 	new->needs_confirm   = 1; | 
 | 	new->empty_confirm   = (fval == NULL); | 
 | 	new->val.nn	     = 0;		/* zeroes the whole structure */ | 
 | 	if (!new->empty_confirm) | 
 | 		new->val     = *fval; | 
 | 	new->needs_mandatory = 0; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dccp_push_empty_confirm(struct list_head *fn_list, u8 feat, u8 local) | 
 | { | 
 | 	return dccp_feat_push_confirm(fn_list, feat, local, NULL); | 
 | } | 
 |  | 
 | static inline void dccp_feat_list_pop(struct dccp_feat_entry *entry) | 
 | { | 
 | 	list_del(&entry->node); | 
 | 	dccp_feat_entry_destructor(entry); | 
 | } | 
 |  | 
 | void dccp_feat_list_purge(struct list_head *fn_list) | 
 | { | 
 | 	struct dccp_feat_entry *entry, *next; | 
 |  | 
 | 	list_for_each_entry_safe(entry, next, fn_list, node) | 
 | 		dccp_feat_entry_destructor(entry); | 
 | 	INIT_LIST_HEAD(fn_list); | 
 | } | 
 | EXPORT_SYMBOL_GPL(dccp_feat_list_purge); | 
 |  | 
 | /* generate @to as full clone of @from - @to must not contain any nodes */ | 
 | int dccp_feat_clone_list(struct list_head const *from, struct list_head *to) | 
 | { | 
 | 	struct dccp_feat_entry *entry, *new; | 
 |  | 
 | 	INIT_LIST_HEAD(to); | 
 | 	list_for_each_entry(entry, from, node) { | 
 | 		new = dccp_feat_clone_entry(entry); | 
 | 		if (new == NULL) | 
 | 			goto cloning_failed; | 
 | 		list_add_tail(&new->node, to); | 
 | 	} | 
 | 	return 0; | 
 |  | 
 | cloning_failed: | 
 | 	dccp_feat_list_purge(to); | 
 | 	return -ENOMEM; | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_valid_nn_length  -  Enforce length constraints on NN options | 
 |  * Length is between 0 and %DCCP_OPTVAL_MAXLEN. Used for outgoing packets only, | 
 |  * incoming options are accepted as long as their values are valid. | 
 |  */ | 
 | static u8 dccp_feat_valid_nn_length(u8 feat_num) | 
 | { | 
 | 	if (feat_num == DCCPF_ACK_RATIO)	/* RFC 4340, 11.3 and 6.6.8 */ | 
 | 		return 2; | 
 | 	if (feat_num == DCCPF_SEQUENCE_WINDOW)	/* RFC 4340, 7.5.2 and 6.5  */ | 
 | 		return 6; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u8 dccp_feat_is_valid_nn_val(u8 feat_num, u64 val) | 
 | { | 
 | 	switch (feat_num) { | 
 | 	case DCCPF_ACK_RATIO: | 
 | 		return val <= DCCPF_ACK_RATIO_MAX; | 
 | 	case DCCPF_SEQUENCE_WINDOW: | 
 | 		return val >= DCCPF_SEQ_WMIN && val <= DCCPF_SEQ_WMAX; | 
 | 	} | 
 | 	return 0;	/* feature unknown - so we can't tell */ | 
 | } | 
 |  | 
 | /* check that SP values are within the ranges defined in RFC 4340 */ | 
 | static u8 dccp_feat_is_valid_sp_val(u8 feat_num, u8 val) | 
 | { | 
 | 	switch (feat_num) { | 
 | 	case DCCPF_CCID: | 
 | 		return val == DCCPC_CCID2 || val == DCCPC_CCID3; | 
 | 	/* Type-check Boolean feature values: */ | 
 | 	case DCCPF_SHORT_SEQNOS: | 
 | 	case DCCPF_ECN_INCAPABLE: | 
 | 	case DCCPF_SEND_ACK_VECTOR: | 
 | 	case DCCPF_SEND_NDP_COUNT: | 
 | 	case DCCPF_DATA_CHECKSUM: | 
 | 	case DCCPF_SEND_LEV_RATE: | 
 | 		return val < 2; | 
 | 	case DCCPF_MIN_CSUM_COVER: | 
 | 		return val < 16; | 
 | 	} | 
 | 	return 0;			/* feature unknown */ | 
 | } | 
 |  | 
 | static u8 dccp_feat_sp_list_ok(u8 feat_num, u8 const *sp_list, u8 sp_len) | 
 | { | 
 | 	if (sp_list == NULL || sp_len < 1) | 
 | 		return 0; | 
 | 	while (sp_len--) | 
 | 		if (!dccp_feat_is_valid_sp_val(feat_num, *sp_list++)) | 
 | 			return 0; | 
 | 	return 1; | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_insert_opts  -  Generate FN options from current list state | 
 |  * @skb: next sk_buff to be sent to the peer | 
 |  * @dp: for client during handshake and general negotiation | 
 |  * @dreq: used by the server only (all Changes/Confirms in LISTEN/RESPOND) | 
 |  */ | 
 | int dccp_feat_insert_opts(struct dccp_sock *dp, struct dccp_request_sock *dreq, | 
 | 			  struct sk_buff *skb) | 
 | { | 
 | 	struct list_head *fn = dreq ? &dreq->dreq_featneg : &dp->dccps_featneg; | 
 | 	struct dccp_feat_entry *pos, *next; | 
 | 	u8 opt, type, len, *ptr, nn_in_nbo[DCCP_OPTVAL_MAXLEN]; | 
 | 	bool rpt; | 
 |  | 
 | 	/* put entries into @skb in the order they appear in the list */ | 
 | 	list_for_each_entry_safe_reverse(pos, next, fn, node) { | 
 | 		opt  = dccp_feat_genopt(pos); | 
 | 		type = dccp_feat_type(pos->feat_num); | 
 | 		rpt  = false; | 
 |  | 
 | 		if (pos->empty_confirm) { | 
 | 			len = 0; | 
 | 			ptr = NULL; | 
 | 		} else { | 
 | 			if (type == FEAT_SP) { | 
 | 				len = pos->val.sp.len; | 
 | 				ptr = pos->val.sp.vec; | 
 | 				rpt = pos->needs_confirm; | 
 | 			} else if (type == FEAT_NN) { | 
 | 				len = dccp_feat_valid_nn_length(pos->feat_num); | 
 | 				ptr = nn_in_nbo; | 
 | 				dccp_encode_value_var(pos->val.nn, ptr, len); | 
 | 			} else { | 
 | 				DCCP_BUG("unknown feature %u", pos->feat_num); | 
 | 				return -1; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (dccp_insert_fn_opt(skb, opt, pos->feat_num, ptr, len, rpt)) | 
 | 			return -1; | 
 | 		if (pos->needs_mandatory && dccp_insert_option_mandatory(skb)) | 
 | 			return -1; | 
 | 		/* | 
 | 		 * Enter CHANGING after transmitting the Change option (6.6.2). | 
 | 		 */ | 
 | 		if (pos->state == FEAT_INITIALISING) | 
 | 			pos->state = FEAT_CHANGING; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * __feat_register_nn  -  Register new NN value on socket | 
 |  * @fn: feature-negotiation list to register with | 
 |  * @feat: an NN feature from %dccp_feature_numbers | 
 |  * @mandatory: use Mandatory option if 1 | 
 |  * @nn_val: value to register (restricted to 4 bytes) | 
 |  * Note that NN features are local by definition (RFC 4340, 6.3.2). | 
 |  */ | 
 | static int __feat_register_nn(struct list_head *fn, u8 feat, | 
 | 			      u8 mandatory, u64 nn_val) | 
 | { | 
 | 	dccp_feat_val fval = { .nn = nn_val }; | 
 |  | 
 | 	if (dccp_feat_type(feat) != FEAT_NN || | 
 | 	    !dccp_feat_is_valid_nn_val(feat, nn_val)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Don't bother with default values, they will be activated anyway. */ | 
 | 	if (nn_val - (u64)dccp_feat_default_value(feat) == 0) | 
 | 		return 0; | 
 |  | 
 | 	return dccp_feat_push_change(fn, feat, 1, mandatory, &fval); | 
 | } | 
 |  | 
 | /** | 
 |  * __feat_register_sp  -  Register new SP value/list on socket | 
 |  * @fn: feature-negotiation list to register with | 
 |  * @feat: an SP feature from %dccp_feature_numbers | 
 |  * @is_local: whether the local (1) or the remote (0) @feat is meant | 
 |  * @mandatory: use Mandatory option if 1 | 
 |  * @sp_val: SP value followed by optional preference list | 
 |  * @sp_len: length of @sp_val in bytes | 
 |  */ | 
 | static int __feat_register_sp(struct list_head *fn, u8 feat, u8 is_local, | 
 | 			      u8 mandatory, u8 const *sp_val, u8 sp_len) | 
 | { | 
 | 	dccp_feat_val fval; | 
 |  | 
 | 	if (dccp_feat_type(feat) != FEAT_SP || | 
 | 	    !dccp_feat_sp_list_ok(feat, sp_val, sp_len)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Avoid negotiating alien CCIDs by only advertising supported ones */ | 
 | 	if (feat == DCCPF_CCID && !ccid_support_check(sp_val, sp_len)) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (dccp_feat_clone_sp_val(&fval, sp_val, sp_len)) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	return dccp_feat_push_change(fn, feat, is_local, mandatory, &fval); | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_register_sp  -  Register requests to change SP feature values | 
 |  * @sk: client or listening socket | 
 |  * @feat: one of %dccp_feature_numbers | 
 |  * @is_local: whether the local (1) or remote (0) @feat is meant | 
 |  * @list: array of preferred values, in descending order of preference | 
 |  * @len: length of @list in bytes | 
 |  */ | 
 | int dccp_feat_register_sp(struct sock *sk, u8 feat, u8 is_local, | 
 | 			  u8 const *list, u8 len) | 
 | {	 /* any changes must be registered before establishing the connection */ | 
 | 	if (sk->sk_state != DCCP_CLOSED) | 
 | 		return -EISCONN; | 
 | 	if (dccp_feat_type(feat) != FEAT_SP) | 
 | 		return -EINVAL; | 
 | 	return __feat_register_sp(&dccp_sk(sk)->dccps_featneg, feat, is_local, | 
 | 				  0, list, len); | 
 | } | 
 |  | 
 | /* Analogous to dccp_feat_register_sp(), but for non-negotiable values */ | 
 | int dccp_feat_register_nn(struct sock *sk, u8 feat, u64 val) | 
 | { | 
 | 	/* any changes must be registered before establishing the connection */ | 
 | 	if (sk->sk_state != DCCP_CLOSED) | 
 | 		return -EISCONN; | 
 | 	if (dccp_feat_type(feat) != FEAT_NN) | 
 | 		return -EINVAL; | 
 | 	return __feat_register_nn(&dccp_sk(sk)->dccps_featneg, feat, 0, val); | 
 | } | 
 |  | 
 | /* | 
 |  *	Tracking features whose value depend on the choice of CCID | 
 |  * | 
 |  * This is designed with an extension in mind so that a list walk could be done | 
 |  * before activating any features. However, the existing framework was found to | 
 |  * work satisfactorily up until now, the automatic verification is left open. | 
 |  * When adding new CCIDs, add a corresponding dependency table here. | 
 |  */ | 
 | static const struct ccid_dependency *dccp_feat_ccid_deps(u8 ccid, bool is_local) | 
 | { | 
 | 	static const struct ccid_dependency ccid2_dependencies[2][2] = { | 
 | 		/* | 
 | 		 * CCID2 mandates Ack Vectors (RFC 4341, 4.): as CCID is a TX | 
 | 		 * feature and Send Ack Vector is an RX feature, `is_local' | 
 | 		 * needs to be reversed. | 
 | 		 */ | 
 | 		{	/* Dependencies of the receiver-side (remote) CCID2 */ | 
 | 			{ | 
 | 				.dependent_feat	= DCCPF_SEND_ACK_VECTOR, | 
 | 				.is_local	= true, | 
 | 				.is_mandatory	= true, | 
 | 				.val		= 1 | 
 | 			}, | 
 | 			{ 0, 0, 0, 0 } | 
 | 		}, | 
 | 		{	/* Dependencies of the sender-side (local) CCID2 */ | 
 | 			{ | 
 | 				.dependent_feat	= DCCPF_SEND_ACK_VECTOR, | 
 | 				.is_local	= false, | 
 | 				.is_mandatory	= true, | 
 | 				.val		= 1 | 
 | 			}, | 
 | 			{ 0, 0, 0, 0 } | 
 | 		} | 
 | 	}; | 
 | 	static const struct ccid_dependency ccid3_dependencies[2][5] = { | 
 | 		{	/* | 
 | 			 * Dependencies of the receiver-side CCID3 | 
 | 			 */ | 
 | 			{	/* locally disable Ack Vectors */ | 
 | 				.dependent_feat	= DCCPF_SEND_ACK_VECTOR, | 
 | 				.is_local	= true, | 
 | 				.is_mandatory	= false, | 
 | 				.val		= 0 | 
 | 			}, | 
 | 			{	/* see below why Send Loss Event Rate is on */ | 
 | 				.dependent_feat	= DCCPF_SEND_LEV_RATE, | 
 | 				.is_local	= true, | 
 | 				.is_mandatory	= true, | 
 | 				.val		= 1 | 
 | 			}, | 
 | 			{	/* NDP Count is needed as per RFC 4342, 6.1.1 */ | 
 | 				.dependent_feat	= DCCPF_SEND_NDP_COUNT, | 
 | 				.is_local	= false, | 
 | 				.is_mandatory	= true, | 
 | 				.val		= 1 | 
 | 			}, | 
 | 			{ 0, 0, 0, 0 }, | 
 | 		}, | 
 | 		{	/* | 
 | 			 * CCID3 at the TX side: we request that the HC-receiver | 
 | 			 * will not send Ack Vectors (they will be ignored, so | 
 | 			 * Mandatory is not set); we enable Send Loss Event Rate | 
 | 			 * (Mandatory since the implementation does not support | 
 | 			 * the Loss Intervals option of RFC 4342, 8.6). | 
 | 			 * The last two options are for peer's information only. | 
 | 			*/ | 
 | 			{ | 
 | 				.dependent_feat	= DCCPF_SEND_ACK_VECTOR, | 
 | 				.is_local	= false, | 
 | 				.is_mandatory	= false, | 
 | 				.val		= 0 | 
 | 			}, | 
 | 			{ | 
 | 				.dependent_feat	= DCCPF_SEND_LEV_RATE, | 
 | 				.is_local	= false, | 
 | 				.is_mandatory	= true, | 
 | 				.val		= 1 | 
 | 			}, | 
 | 			{	/* this CCID does not support Ack Ratio */ | 
 | 				.dependent_feat	= DCCPF_ACK_RATIO, | 
 | 				.is_local	= true, | 
 | 				.is_mandatory	= false, | 
 | 				.val		= 0 | 
 | 			}, | 
 | 			{	/* tell receiver we are sending NDP counts */ | 
 | 				.dependent_feat	= DCCPF_SEND_NDP_COUNT, | 
 | 				.is_local	= true, | 
 | 				.is_mandatory	= false, | 
 | 				.val		= 1 | 
 | 			}, | 
 | 			{ 0, 0, 0, 0 } | 
 | 		} | 
 | 	}; | 
 | 	switch (ccid) { | 
 | 	case DCCPC_CCID2: | 
 | 		return ccid2_dependencies[is_local]; | 
 | 	case DCCPC_CCID3: | 
 | 		return ccid3_dependencies[is_local]; | 
 | 	default: | 
 | 		return NULL; | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_propagate_ccid - Resolve dependencies of features on choice of CCID | 
 |  * @fn: feature-negotiation list to update | 
 |  * @id: CCID number to track | 
 |  * @is_local: whether TX CCID (1) or RX CCID (0) is meant | 
 |  * This function needs to be called after registering all other features. | 
 |  */ | 
 | static int dccp_feat_propagate_ccid(struct list_head *fn, u8 id, bool is_local) | 
 | { | 
 | 	const struct ccid_dependency *table = dccp_feat_ccid_deps(id, is_local); | 
 | 	int i, rc = (table == NULL); | 
 |  | 
 | 	for (i = 0; rc == 0 && table[i].dependent_feat != DCCPF_RESERVED; i++) | 
 | 		if (dccp_feat_type(table[i].dependent_feat) == FEAT_SP) | 
 | 			rc = __feat_register_sp(fn, table[i].dependent_feat, | 
 | 						    table[i].is_local, | 
 | 						    table[i].is_mandatory, | 
 | 						    &table[i].val, 1); | 
 | 		else | 
 | 			rc = __feat_register_nn(fn, table[i].dependent_feat, | 
 | 						    table[i].is_mandatory, | 
 | 						    table[i].val); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_finalise_settings  -  Finalise settings before starting negotiation | 
 |  * @dp: client or listening socket (settings will be inherited) | 
 |  * This is called after all registrations (socket initialisation, sysctls, and | 
 |  * sockopt calls), and before sending the first packet containing Change options | 
 |  * (ie. client-Request or server-Response), to ensure internal consistency. | 
 |  */ | 
 | int dccp_feat_finalise_settings(struct dccp_sock *dp) | 
 | { | 
 | 	struct list_head *fn = &dp->dccps_featneg; | 
 | 	struct dccp_feat_entry *entry; | 
 | 	int i = 2, ccids[2] = { -1, -1 }; | 
 |  | 
 | 	/* | 
 | 	 * Propagating CCIDs: | 
 | 	 * 1) not useful to propagate CCID settings if this host advertises more | 
 | 	 *    than one CCID: the choice of CCID  may still change - if this is | 
 | 	 *    the client, or if this is the server and the client sends | 
 | 	 *    singleton CCID values. | 
 | 	 * 2) since is that propagate_ccid changes the list, we defer changing | 
 | 	 *    the sorted list until after the traversal. | 
 | 	 */ | 
 | 	list_for_each_entry(entry, fn, node) | 
 | 		if (entry->feat_num == DCCPF_CCID && entry->val.sp.len == 1) | 
 | 			ccids[entry->is_local] = entry->val.sp.vec[0]; | 
 | 	while (i--) | 
 | 		if (ccids[i] > 0 && dccp_feat_propagate_ccid(fn, ccids[i], i)) | 
 | 			return -1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_server_ccid_dependencies  -  Resolve CCID-dependent features | 
 |  * It is the server which resolves the dependencies once the CCID has been | 
 |  * fully negotiated. If no CCID has been negotiated, it uses the default CCID. | 
 |  */ | 
 | int dccp_feat_server_ccid_dependencies(struct dccp_request_sock *dreq) | 
 | { | 
 | 	struct list_head *fn = &dreq->dreq_featneg; | 
 | 	struct dccp_feat_entry *entry; | 
 | 	u8 is_local, ccid; | 
 |  | 
 | 	for (is_local = 0; is_local <= 1; is_local++) { | 
 | 		entry = dccp_feat_list_lookup(fn, DCCPF_CCID, is_local); | 
 |  | 
 | 		if (entry != NULL && !entry->empty_confirm) | 
 | 			ccid = entry->val.sp.vec[0]; | 
 | 		else | 
 | 			ccid = dccp_feat_default_value(DCCPF_CCID); | 
 |  | 
 | 		if (dccp_feat_propagate_ccid(fn, ccid, is_local)) | 
 | 			return -1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Select the first entry in @servlist that also occurs in @clilist (6.3.1) */ | 
 | static int dccp_feat_preflist_match(u8 *servlist, u8 slen, u8 *clilist, u8 clen) | 
 | { | 
 | 	u8 c, s; | 
 |  | 
 | 	for (s = 0; s < slen; s++) | 
 | 		for (c = 0; c < clen; c++) | 
 | 			if (servlist[s] == clilist[c]) | 
 | 				return servlist[s]; | 
 | 	return -1; | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_prefer  -  Move preferred entry to the start of array | 
 |  * Reorder the @array_len elements in @array so that @preferred_value comes | 
 |  * first. Returns >0 to indicate that @preferred_value does occur in @array. | 
 |  */ | 
 | static u8 dccp_feat_prefer(u8 preferred_value, u8 *array, u8 array_len) | 
 | { | 
 | 	u8 i, does_occur = 0; | 
 |  | 
 | 	if (array != NULL) { | 
 | 		for (i = 0; i < array_len; i++) | 
 | 			if (array[i] == preferred_value) { | 
 | 				array[i] = array[0]; | 
 | 				does_occur++; | 
 | 			} | 
 | 		if (does_occur) | 
 | 			array[0] = preferred_value; | 
 | 	} | 
 | 	return does_occur; | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_reconcile  -  Reconcile SP preference lists | 
 |  *  @fval: SP list to reconcile into | 
 |  *  @arr: received SP preference list | 
 |  *  @len: length of @arr in bytes | 
 |  *  @is_server: whether this side is the server (and @fv is the server's list) | 
 |  *  @reorder: whether to reorder the list in @fv after reconciling with @arr | 
 |  * When successful, > 0 is returned and the reconciled list is in @fval. | 
 |  * A value of 0 means that negotiation failed (no shared entry). | 
 |  */ | 
 | static int dccp_feat_reconcile(dccp_feat_val *fv, u8 *arr, u8 len, | 
 | 			       bool is_server, bool reorder) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	if (!fv->sp.vec || !arr) { | 
 | 		DCCP_CRIT("NULL feature value or array"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (is_server) | 
 | 		rc = dccp_feat_preflist_match(fv->sp.vec, fv->sp.len, arr, len); | 
 | 	else | 
 | 		rc = dccp_feat_preflist_match(arr, len, fv->sp.vec, fv->sp.len); | 
 |  | 
 | 	if (!reorder) | 
 | 		return rc; | 
 | 	if (rc < 0) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * Reorder list: used for activating features and in dccp_insert_fn_opt. | 
 | 	 */ | 
 | 	return dccp_feat_prefer(rc, fv->sp.vec, fv->sp.len); | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_change_recv  -  Process incoming ChangeL/R options | 
 |  * @fn: feature-negotiation list to update | 
 |  * @is_mandatory: whether the Change was preceded by a Mandatory option | 
 |  * @opt: %DCCPO_CHANGE_L or %DCCPO_CHANGE_R | 
 |  * @feat: one of %dccp_feature_numbers | 
 |  * @val: NN value or SP value/preference list | 
 |  * @len: length of @val in bytes | 
 |  * @server: whether this node is the server (1) or the client (0) | 
 |  */ | 
 | static u8 dccp_feat_change_recv(struct list_head *fn, u8 is_mandatory, u8 opt, | 
 | 				u8 feat, u8 *val, u8 len, const bool server) | 
 | { | 
 | 	u8 defval, type = dccp_feat_type(feat); | 
 | 	const bool local = (opt == DCCPO_CHANGE_R); | 
 | 	struct dccp_feat_entry *entry; | 
 | 	dccp_feat_val fval; | 
 |  | 
 | 	if (len == 0 || type == FEAT_UNKNOWN)		/* 6.1 and 6.6.8 */ | 
 | 		goto unknown_feature_or_value; | 
 |  | 
 | 	/* | 
 | 	 *	Negotiation of NN features: Change R is invalid, so there is no | 
 | 	 *	simultaneous negotiation; hence we do not look up in the list. | 
 | 	 */ | 
 | 	if (type == FEAT_NN) { | 
 | 		if (local || len > sizeof(fval.nn)) | 
 | 			goto unknown_feature_or_value; | 
 |  | 
 | 		/* 6.3.2: "The feature remote MUST accept any valid value..." */ | 
 | 		fval.nn = dccp_decode_value_var(val, len); | 
 | 		if (!dccp_feat_is_valid_nn_val(feat, fval.nn)) | 
 | 			goto unknown_feature_or_value; | 
 |  | 
 | 		return dccp_feat_push_confirm(fn, feat, local, &fval); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 *	Unidirectional/simultaneous negotiation of SP features (6.3.1) | 
 | 	 */ | 
 | 	entry = dccp_feat_list_lookup(fn, feat, local); | 
 | 	if (entry == NULL) { | 
 | 		/* | 
 | 		 * No particular preferences have been registered. We deal with | 
 | 		 * this situation by assuming that all valid values are equally | 
 | 		 * acceptable, and apply the following checks: | 
 | 		 * - if the peer's list is a singleton, we accept a valid value; | 
 | 		 * - if we are the server, we first try to see if the peer (the | 
 | 		 *   client) advertises the default value. If yes, we use it, | 
 | 		 *   otherwise we accept the preferred value; | 
 | 		 * - else if we are the client, we use the first list element. | 
 | 		 */ | 
 | 		if (dccp_feat_clone_sp_val(&fval, val, 1)) | 
 | 			return DCCP_RESET_CODE_TOO_BUSY; | 
 |  | 
 | 		if (len > 1 && server) { | 
 | 			defval = dccp_feat_default_value(feat); | 
 | 			if (dccp_feat_preflist_match(&defval, 1, val, len) > -1) | 
 | 				fval.sp.vec[0] = defval; | 
 | 		} else if (!dccp_feat_is_valid_sp_val(feat, fval.sp.vec[0])) { | 
 | 			kfree(fval.sp.vec); | 
 | 			goto unknown_feature_or_value; | 
 | 		} | 
 |  | 
 | 		/* Treat unsupported CCIDs like invalid values */ | 
 | 		if (feat == DCCPF_CCID && !ccid_support_check(fval.sp.vec, 1)) { | 
 | 			kfree(fval.sp.vec); | 
 | 			goto not_valid_or_not_known; | 
 | 		} | 
 |  | 
 | 		return dccp_feat_push_confirm(fn, feat, local, &fval); | 
 |  | 
 | 	} else if (entry->state == FEAT_UNSTABLE) {	/* 6.6.2 */ | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (dccp_feat_reconcile(&entry->val, val, len, server, true)) { | 
 | 		entry->empty_confirm = 0; | 
 | 	} else if (is_mandatory) { | 
 | 		return DCCP_RESET_CODE_MANDATORY_ERROR; | 
 | 	} else if (entry->state == FEAT_INITIALISING) { | 
 | 		/* | 
 | 		 * Failed simultaneous negotiation (server only): try to `save' | 
 | 		 * the connection by checking whether entry contains the default | 
 | 		 * value for @feat. If yes, send an empty Confirm to signal that | 
 | 		 * the received Change was not understood - which implies using | 
 | 		 * the default value. | 
 | 		 * If this also fails, we use Reset as the last resort. | 
 | 		 */ | 
 | 		WARN_ON(!server); | 
 | 		defval = dccp_feat_default_value(feat); | 
 | 		if (!dccp_feat_reconcile(&entry->val, &defval, 1, server, true)) | 
 | 			return DCCP_RESET_CODE_OPTION_ERROR; | 
 | 		entry->empty_confirm = 1; | 
 | 	} | 
 | 	entry->needs_confirm   = 1; | 
 | 	entry->needs_mandatory = 0; | 
 | 	entry->state	       = FEAT_STABLE; | 
 | 	return 0; | 
 |  | 
 | unknown_feature_or_value: | 
 | 	if (!is_mandatory) | 
 | 		return dccp_push_empty_confirm(fn, feat, local); | 
 |  | 
 | not_valid_or_not_known: | 
 | 	return is_mandatory ? DCCP_RESET_CODE_MANDATORY_ERROR | 
 | 			    : DCCP_RESET_CODE_OPTION_ERROR; | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_confirm_recv  -  Process received Confirm options | 
 |  * @fn: feature-negotiation list to update | 
 |  * @is_mandatory: whether @opt was preceded by a Mandatory option | 
 |  * @opt: %DCCPO_CONFIRM_L or %DCCPO_CONFIRM_R | 
 |  * @feat: one of %dccp_feature_numbers | 
 |  * @val: NN value or SP value/preference list | 
 |  * @len: length of @val in bytes | 
 |  * @server: whether this node is server (1) or client (0) | 
 |  */ | 
 | static u8 dccp_feat_confirm_recv(struct list_head *fn, u8 is_mandatory, u8 opt, | 
 | 				 u8 feat, u8 *val, u8 len, const bool server) | 
 | { | 
 | 	u8 *plist, plen, type = dccp_feat_type(feat); | 
 | 	const bool local = (opt == DCCPO_CONFIRM_R); | 
 | 	struct dccp_feat_entry *entry = dccp_feat_list_lookup(fn, feat, local); | 
 |  | 
 | 	if (entry == NULL) {	/* nothing queued: ignore or handle error */ | 
 | 		if (is_mandatory && type == FEAT_UNKNOWN) | 
 | 			return DCCP_RESET_CODE_MANDATORY_ERROR; | 
 |  | 
 | 		if (!local && type == FEAT_NN)		/* 6.3.2 */ | 
 | 			goto confirmation_failed; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (entry->state != FEAT_CHANGING)		/* 6.6.2 */ | 
 | 		return 0; | 
 |  | 
 | 	if (len == 0) { | 
 | 		if (dccp_feat_must_be_understood(feat))	/* 6.6.7 */ | 
 | 			goto confirmation_failed; | 
 | 		/* | 
 | 		 * Empty Confirm during connection setup: this means reverting | 
 | 		 * to the `old' value, which in this case is the default. Since | 
 | 		 * we handle default values automatically when no other values | 
 | 		 * have been set, we revert to the old value by removing this | 
 | 		 * entry from the list. | 
 | 		 */ | 
 | 		dccp_feat_list_pop(entry); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (type == FEAT_NN) { | 
 | 		if (len > sizeof(entry->val.nn)) | 
 | 			goto confirmation_failed; | 
 |  | 
 | 		if (entry->val.nn == dccp_decode_value_var(val, len)) | 
 | 			goto confirmation_succeeded; | 
 |  | 
 | 		DCCP_WARN("Bogus Confirm for non-existing value\n"); | 
 | 		goto confirmation_failed; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Parsing SP Confirms: the first element of @val is the preferred | 
 | 	 * SP value which the peer confirms, the remainder depends on @len. | 
 | 	 * Note that only the confirmed value need to be a valid SP value. | 
 | 	 */ | 
 | 	if (!dccp_feat_is_valid_sp_val(feat, *val)) | 
 | 		goto confirmation_failed; | 
 |  | 
 | 	if (len == 1) {		/* peer didn't supply a preference list */ | 
 | 		plist = val; | 
 | 		plen  = len; | 
 | 	} else {		/* preferred value + preference list */ | 
 | 		plist = val + 1; | 
 | 		plen  = len - 1; | 
 | 	} | 
 |  | 
 | 	/* Check whether the peer got the reconciliation right (6.6.8) */ | 
 | 	if (dccp_feat_reconcile(&entry->val, plist, plen, server, 0) != *val) { | 
 | 		DCCP_WARN("Confirm selected the wrong value %u\n", *val); | 
 | 		return DCCP_RESET_CODE_OPTION_ERROR; | 
 | 	} | 
 | 	entry->val.sp.vec[0] = *val; | 
 |  | 
 | confirmation_succeeded: | 
 | 	entry->state = FEAT_STABLE; | 
 | 	return 0; | 
 |  | 
 | confirmation_failed: | 
 | 	DCCP_WARN("Confirmation failed\n"); | 
 | 	return is_mandatory ? DCCP_RESET_CODE_MANDATORY_ERROR | 
 | 			    : DCCP_RESET_CODE_OPTION_ERROR; | 
 | } | 
 |  | 
 | /** | 
 |  * dccp_feat_parse_options  -  Process Feature-Negotiation Options | 
 |  * @sk: for general use and used by the client during connection setup | 
 |  * @dreq: used by the server during connection setup | 
 |  * @mandatory: whether @opt was preceded by a Mandatory option | 
 |  * @opt: %DCCPO_CHANGE_L | %DCCPO_CHANGE_R | %DCCPO_CONFIRM_L | %DCCPO_CONFIRM_R | 
 |  * @feat: one of %dccp_feature_numbers | 
 |  * @val: value contents of @opt | 
 |  * @len: length of @val in bytes | 
 |  * Returns 0 on success, a Reset code for ending the connection otherwise. | 
 |  */ | 
 | int dccp_feat_parse_options(struct sock *sk, struct dccp_request_sock *dreq, | 
 | 			    u8 mandatory, u8 opt, u8 feat, u8 *val, u8 len) | 
 | { | 
 | 	struct dccp_sock *dp = dccp_sk(sk); | 
 | 	struct list_head *fn = dreq ? &dreq->dreq_featneg : &dp->dccps_featneg; | 
 | 	bool server = false; | 
 |  | 
 | 	switch (sk->sk_state) { | 
 | 	/* | 
 | 	 *	Negotiation during connection setup | 
 | 	 */ | 
 | 	case DCCP_LISTEN: | 
 | 		server = true;			/* fall through */ | 
 | 	case DCCP_REQUESTING: | 
 | 		switch (opt) { | 
 | 		case DCCPO_CHANGE_L: | 
 | 		case DCCPO_CHANGE_R: | 
 | 			return dccp_feat_change_recv(fn, mandatory, opt, feat, | 
 | 						     val, len, server); | 
 | 		case DCCPO_CONFIRM_R: | 
 | 		case DCCPO_CONFIRM_L: | 
 | 			return dccp_feat_confirm_recv(fn, mandatory, opt, feat, | 
 | 						      val, len, server); | 
 | 		} | 
 | 	} | 
 | 	return 0;	/* ignore FN options in all other states */ | 
 | } | 
 |  | 
 | int dccp_feat_init(struct sock *sk) | 
 | { | 
 | 	struct dccp_sock *dp = dccp_sk(sk); | 
 | 	struct dccp_minisock *dmsk = dccp_msk(sk); | 
 | 	int rc; | 
 |  | 
 | 	INIT_LIST_HEAD(&dmsk->dccpms_pending);	/* XXX no longer used */ | 
 | 	INIT_LIST_HEAD(&dmsk->dccpms_conf);	/* XXX no longer used */ | 
 |  | 
 | 	/* Ack ratio */ | 
 | 	rc = __feat_register_nn(&dp->dccps_featneg, DCCPF_ACK_RATIO, 0, | 
 | 				dp->dccps_l_ack_ratio); | 
 | 	return rc; | 
 | } | 
 |  | 
 | EXPORT_SYMBOL_GPL(dccp_feat_init); | 
 |  | 
 | int dccp_feat_activate_values(struct sock *sk, struct list_head *fn_list) | 
 | { | 
 | 	struct dccp_sock *dp = dccp_sk(sk); | 
 | 	struct dccp_feat_entry *cur, *next; | 
 | 	int idx; | 
 | 	dccp_feat_val *fvals[DCCP_FEAT_SUPPORTED_MAX][2] = { | 
 | 		 [0 ... DCCP_FEAT_SUPPORTED_MAX-1] = { NULL, NULL } | 
 | 	}; | 
 |  | 
 | 	list_for_each_entry(cur, fn_list, node) { | 
 | 		/* | 
 | 		 * An empty Confirm means that either an unknown feature type | 
 | 		 * or an invalid value was present. In the first case there is | 
 | 		 * nothing to activate, in the other the default value is used. | 
 | 		 */ | 
 | 		if (cur->empty_confirm) | 
 | 			continue; | 
 |  | 
 | 		idx = dccp_feat_index(cur->feat_num); | 
 | 		if (idx < 0) { | 
 | 			DCCP_BUG("Unknown feature %u", cur->feat_num); | 
 | 			goto activation_failed; | 
 | 		} | 
 | 		if (cur->state != FEAT_STABLE) { | 
 | 			DCCP_CRIT("Negotiation of %s %u failed in state %u", | 
 | 				  cur->is_local ? "local" : "remote", | 
 | 				  cur->feat_num, cur->state); | 
 | 			goto activation_failed; | 
 | 		} | 
 | 		fvals[idx][cur->is_local] = &cur->val; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Activate in decreasing order of index, so that the CCIDs are always | 
 | 	 * activated as the last feature. This avoids the case where a CCID | 
 | 	 * relies on the initialisation of one or more features that it depends | 
 | 	 * on (e.g. Send NDP Count, Send Ack Vector, and Ack Ratio features). | 
 | 	 */ | 
 | 	for (idx = DCCP_FEAT_SUPPORTED_MAX; --idx >= 0;) | 
 | 		if (__dccp_feat_activate(sk, idx, 0, fvals[idx][0]) || | 
 | 		    __dccp_feat_activate(sk, idx, 1, fvals[idx][1])) { | 
 | 			DCCP_CRIT("Could not activate %d", idx); | 
 | 			goto activation_failed; | 
 | 		} | 
 |  | 
 | 	/* Clean up Change options which have been confirmed already */ | 
 | 	list_for_each_entry_safe(cur, next, fn_list, node) | 
 | 		if (!cur->needs_confirm) | 
 | 			dccp_feat_list_pop(cur); | 
 |  | 
 | 	dccp_pr_debug("Activation OK\n"); | 
 | 	return 0; | 
 |  | 
 | activation_failed: | 
 | 	/* | 
 | 	 * We clean up everything that may have been allocated, since | 
 | 	 * it is difficult to track at which stage negotiation failed. | 
 | 	 * This is ok, since all allocation functions below are robust | 
 | 	 * against NULL arguments. | 
 | 	 */ | 
 | 	ccid_hc_rx_delete(dp->dccps_hc_rx_ccid, sk); | 
 | 	ccid_hc_tx_delete(dp->dccps_hc_tx_ccid, sk); | 
 | 	dp->dccps_hc_rx_ccid = dp->dccps_hc_tx_ccid = NULL; | 
 | 	dccp_ackvec_free(dp->dccps_hc_rx_ackvec); | 
 | 	dp->dccps_hc_rx_ackvec = NULL; | 
 | 	return -1; | 
 | } | 
 |  | 
 | #ifdef CONFIG_IP_DCCP_DEBUG | 
 | const char *dccp_feat_typename(const u8 type) | 
 | { | 
 | 	switch(type) { | 
 | 	case DCCPO_CHANGE_L:  return("ChangeL"); | 
 | 	case DCCPO_CONFIRM_L: return("ConfirmL"); | 
 | 	case DCCPO_CHANGE_R:  return("ChangeR"); | 
 | 	case DCCPO_CONFIRM_R: return("ConfirmR"); | 
 | 	/* the following case must not appear in feature negotation  */ | 
 | 	default:	      dccp_pr_debug("unknown type %d [BUG!]\n", type); | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | const char *dccp_feat_name(const u8 feat) | 
 | { | 
 | 	static const char *feature_names[] = { | 
 | 		[DCCPF_RESERVED]	= "Reserved", | 
 | 		[DCCPF_CCID]		= "CCID", | 
 | 		[DCCPF_SHORT_SEQNOS]	= "Allow Short Seqnos", | 
 | 		[DCCPF_SEQUENCE_WINDOW]	= "Sequence Window", | 
 | 		[DCCPF_ECN_INCAPABLE]	= "ECN Incapable", | 
 | 		[DCCPF_ACK_RATIO]	= "Ack Ratio", | 
 | 		[DCCPF_SEND_ACK_VECTOR]	= "Send ACK Vector", | 
 | 		[DCCPF_SEND_NDP_COUNT]	= "Send NDP Count", | 
 | 		[DCCPF_MIN_CSUM_COVER]	= "Min. Csum Coverage", | 
 | 		[DCCPF_DATA_CHECKSUM]	= "Send Data Checksum", | 
 | 	}; | 
 | 	if (feat > DCCPF_DATA_CHECKSUM && feat < DCCPF_MIN_CCID_SPECIFIC) | 
 | 		return feature_names[DCCPF_RESERVED]; | 
 |  | 
 | 	if (feat ==  DCCPF_SEND_LEV_RATE) | 
 | 		return "Send Loss Event Rate"; | 
 | 	if (feat >= DCCPF_MIN_CCID_SPECIFIC) | 
 | 		return "CCID-specific"; | 
 |  | 
 | 	return feature_names[feat]; | 
 | } | 
 | #endif /* CONFIG_IP_DCCP_DEBUG */ |