)]}'
{
  "commit": "9b9d401b8d11796f4c4bcbcabecfec9f5d85ea25",
  "tree": "426787ff4fc1fa3ece504e40a2c1284d636729d6",
  "parents": [
    "818fcac554397a04987d49e2bd2dfc2d394b265c"
  ],
  "author": {
    "name": "Anton Vorontsov",
    "email": "avorontsov@ru.mvista.com",
    "time": "Wed Aug 19 03:28:21 2009 +0400"
  },
  "committer": {
    "name": "Kumar Gala",
    "email": "galak@kernel.crashing.org",
    "time": "Tue Aug 25 09:44:10 2009 -0500"
  },
  "message": "powerpc/85xx: Add QE USB support for MPC8569E-MDS boards\n\n- Add gpio-controller node for BCSR17, it is used to control USB\n  speed and VBUS;\n- Add timer node for QE GTM, needed for USB host;\n- Add usb node itself;\n- Add some probing code for BCSR GPIOs.\n\nNOTE: QE USB doesn\u0027t work on prototype boards, but should work on\n      pilot boards if specs and schematics are correct, though we\n      don\u0027t have the pilot boards to actually test it.\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "9e4ce99e1613643f60430f001813f2da0977a6e1",
      "old_mode": 33188,
      "old_path": "arch/powerpc/boot/dts/mpc8569mds.dts",
      "new_id": "06332d61830a094e181f3790e4314c007d9ef0df",
      "new_mode": 33188,
      "new_path": "arch/powerpc/boot/dts/mpc8569mds.dts"
    },
    {
      "type": "modify",
      "old_id": "bfb32834ab0c442f78c7cbf870ffedf6c34b17a1",
      "old_mode": 33188,
      "old_path": "arch/powerpc/platforms/85xx/mpc85xx_mds.c",
      "new_id": "20a61d0af33b259faa68f89c9085f41e70f66d80",
      "new_mode": 33188,
      "new_path": "arch/powerpc/platforms/85xx/mpc85xx_mds.c"
    }
  ]
}