|  | /*  Kernel module help for PPC64. | 
|  | Copyright (C) 2001, 2003 Rusty Russell IBM Corporation. | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 2 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; if not, write to the Free Software | 
|  | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/elf.h> | 
|  | #include <linux/moduleloader.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/vmalloc.h> | 
|  | #include <linux/ftrace.h> | 
|  | #include <linux/bug.h> | 
|  | #include <asm/module.h> | 
|  | #include <asm/firmware.h> | 
|  | #include <asm/code-patching.h> | 
|  | #include <linux/sort.h> | 
|  |  | 
|  | #include "setup.h" | 
|  |  | 
|  | /* FIXME: We don't do .init separately.  To do this, we'd need to have | 
|  | a separate r2 value in the init and core section, and stub between | 
|  | them, too. | 
|  |  | 
|  | Using a magic allocator which places modules within 32MB solves | 
|  | this, and makes other things simpler.  Anton? | 
|  | --RR.  */ | 
|  | #if 0 | 
|  | #define DEBUGP printk | 
|  | #else | 
|  | #define DEBUGP(fmt , ...) | 
|  | #endif | 
|  |  | 
|  | /* Like PPC32, we need little trampolines to do > 24-bit jumps (into | 
|  | the kernel itself).  But on PPC64, these need to be used for every | 
|  | jump, actually, to reset r2 (TOC+0x8000). */ | 
|  | struct ppc64_stub_entry | 
|  | { | 
|  | /* 28 byte jump instruction sequence (7 instructions) */ | 
|  | unsigned char jump[28]; | 
|  | unsigned char unused[4]; | 
|  | /* Data for the above code */ | 
|  | struct ppc64_opd_entry opd; | 
|  | }; | 
|  |  | 
|  | /* We use a stub to fix up r2 (TOC ptr) and to jump to the (external) | 
|  | function which may be more than 24-bits away.  We could simply | 
|  | patch the new r2 value and function pointer into the stub, but it's | 
|  | significantly shorter to put these values at the end of the stub | 
|  | code, and patch the stub address (32-bits relative to the TOC ptr, | 
|  | r2) into the stub. */ | 
|  | static struct ppc64_stub_entry ppc64_stub = | 
|  | { .jump = { | 
|  | 0x3d, 0x82, 0x00, 0x00, /* addis   r12,r2, <high> */ | 
|  | 0x39, 0x8c, 0x00, 0x00, /* addi    r12,r12, <low> */ | 
|  | /* Save current r2 value in magic place on the stack. */ | 
|  | 0xf8, 0x41, 0x00, 0x28, /* std     r2,40(r1) */ | 
|  | 0xe9, 0x6c, 0x00, 0x20, /* ld      r11,32(r12) */ | 
|  | 0xe8, 0x4c, 0x00, 0x28, /* ld      r2,40(r12) */ | 
|  | 0x7d, 0x69, 0x03, 0xa6, /* mtctr   r11 */ | 
|  | 0x4e, 0x80, 0x04, 0x20  /* bctr */ | 
|  | } }; | 
|  |  | 
|  | /* Count how many different 24-bit relocations (different symbol, | 
|  | different addend) */ | 
|  | static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num) | 
|  | { | 
|  | unsigned int i, r_info, r_addend, _count_relocs; | 
|  |  | 
|  | /* FIXME: Only count external ones --RR */ | 
|  | _count_relocs = 0; | 
|  | r_info = 0; | 
|  | r_addend = 0; | 
|  | for (i = 0; i < num; i++) | 
|  | /* Only count 24-bit relocs, others don't need stubs */ | 
|  | if (ELF64_R_TYPE(rela[i].r_info) == R_PPC_REL24 && | 
|  | (r_info != ELF64_R_SYM(rela[i].r_info) || | 
|  | r_addend != rela[i].r_addend)) { | 
|  | _count_relocs++; | 
|  | r_info = ELF64_R_SYM(rela[i].r_info); | 
|  | r_addend = rela[i].r_addend; | 
|  | } | 
|  |  | 
|  | return _count_relocs; | 
|  | } | 
|  |  | 
|  | static int relacmp(const void *_x, const void *_y) | 
|  | { | 
|  | const Elf64_Rela *x, *y; | 
|  |  | 
|  | y = (Elf64_Rela *)_x; | 
|  | x = (Elf64_Rela *)_y; | 
|  |  | 
|  | /* Compare the entire r_info (as opposed to ELF64_R_SYM(r_info) only) to | 
|  | * make the comparison cheaper/faster. It won't affect the sorting or | 
|  | * the counting algorithms' performance | 
|  | */ | 
|  | if (x->r_info < y->r_info) | 
|  | return -1; | 
|  | else if (x->r_info > y->r_info) | 
|  | return 1; | 
|  | else if (x->r_addend < y->r_addend) | 
|  | return -1; | 
|  | else if (x->r_addend > y->r_addend) | 
|  | return 1; | 
|  | else | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void relaswap(void *_x, void *_y, int size) | 
|  | { | 
|  | uint64_t *x, *y, tmp; | 
|  | int i; | 
|  |  | 
|  | y = (uint64_t *)_x; | 
|  | x = (uint64_t *)_y; | 
|  |  | 
|  | for (i = 0; i < sizeof(Elf64_Rela) / sizeof(uint64_t); i++) { | 
|  | tmp = x[i]; | 
|  | x[i] = y[i]; | 
|  | y[i] = tmp; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Get size of potential trampolines required. */ | 
|  | static unsigned long get_stubs_size(const Elf64_Ehdr *hdr, | 
|  | const Elf64_Shdr *sechdrs) | 
|  | { | 
|  | /* One extra reloc so it's always 0-funcaddr terminated */ | 
|  | unsigned long relocs = 1; | 
|  | unsigned i; | 
|  |  | 
|  | /* Every relocated section... */ | 
|  | for (i = 1; i < hdr->e_shnum; i++) { | 
|  | if (sechdrs[i].sh_type == SHT_RELA) { | 
|  | DEBUGP("Found relocations in section %u\n", i); | 
|  | DEBUGP("Ptr: %p.  Number: %lu\n", | 
|  | (void *)sechdrs[i].sh_addr, | 
|  | sechdrs[i].sh_size / sizeof(Elf64_Rela)); | 
|  |  | 
|  | /* Sort the relocation information based on a symbol and | 
|  | * addend key. This is a stable O(n*log n) complexity | 
|  | * alogrithm but it will reduce the complexity of | 
|  | * count_relocs() to linear complexity O(n) | 
|  | */ | 
|  | sort((void *)sechdrs[i].sh_addr, | 
|  | sechdrs[i].sh_size / sizeof(Elf64_Rela), | 
|  | sizeof(Elf64_Rela), relacmp, relaswap); | 
|  |  | 
|  | relocs += count_relocs((void *)sechdrs[i].sh_addr, | 
|  | sechdrs[i].sh_size | 
|  | / sizeof(Elf64_Rela)); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_DYNAMIC_FTRACE | 
|  | /* make the trampoline to the ftrace_caller */ | 
|  | relocs++; | 
|  | #endif | 
|  |  | 
|  | DEBUGP("Looks like a total of %lu stubs, max\n", relocs); | 
|  | return relocs * sizeof(struct ppc64_stub_entry); | 
|  | } | 
|  |  | 
|  | static void dedotify_versions(struct modversion_info *vers, | 
|  | unsigned long size) | 
|  | { | 
|  | struct modversion_info *end; | 
|  |  | 
|  | for (end = (void *)vers + size; vers < end; vers++) | 
|  | if (vers->name[0] == '.') | 
|  | memmove(vers->name, vers->name+1, strlen(vers->name)); | 
|  | } | 
|  |  | 
|  | /* Undefined symbols which refer to .funcname, hack to funcname */ | 
|  | static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | for (i = 1; i < numsyms; i++) { | 
|  | if (syms[i].st_shndx == SHN_UNDEF) { | 
|  | char *name = strtab + syms[i].st_name; | 
|  | if (name[0] == '.') | 
|  | memmove(name, name+1, strlen(name)); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | int module_frob_arch_sections(Elf64_Ehdr *hdr, | 
|  | Elf64_Shdr *sechdrs, | 
|  | char *secstrings, | 
|  | struct module *me) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | /* Find .toc and .stubs sections, symtab and strtab */ | 
|  | for (i = 1; i < hdr->e_shnum; i++) { | 
|  | char *p; | 
|  | if (strcmp(secstrings + sechdrs[i].sh_name, ".stubs") == 0) | 
|  | me->arch.stubs_section = i; | 
|  | else if (strcmp(secstrings + sechdrs[i].sh_name, ".toc") == 0) | 
|  | me->arch.toc_section = i; | 
|  | else if (strcmp(secstrings+sechdrs[i].sh_name,"__versions")==0) | 
|  | dedotify_versions((void *)hdr + sechdrs[i].sh_offset, | 
|  | sechdrs[i].sh_size); | 
|  |  | 
|  | /* We don't handle .init for the moment: rename to _init */ | 
|  | while ((p = strstr(secstrings + sechdrs[i].sh_name, ".init"))) | 
|  | p[0] = '_'; | 
|  |  | 
|  | if (sechdrs[i].sh_type == SHT_SYMTAB) | 
|  | dedotify((void *)hdr + sechdrs[i].sh_offset, | 
|  | sechdrs[i].sh_size / sizeof(Elf64_Sym), | 
|  | (void *)hdr | 
|  | + sechdrs[sechdrs[i].sh_link].sh_offset); | 
|  | } | 
|  |  | 
|  | if (!me->arch.stubs_section) { | 
|  | printk("%s: doesn't contain .stubs.\n", me->name); | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | /* If we don't have a .toc, just use .stubs.  We need to set r2 | 
|  | to some reasonable value in case the module calls out to | 
|  | other functions via a stub, or if a function pointer escapes | 
|  | the module by some means.  */ | 
|  | if (!me->arch.toc_section) | 
|  | me->arch.toc_section = me->arch.stubs_section; | 
|  |  | 
|  | /* Override the stubs size */ | 
|  | sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int apply_relocate(Elf64_Shdr *sechdrs, | 
|  | const char *strtab, | 
|  | unsigned int symindex, | 
|  | unsigned int relsec, | 
|  | struct module *me) | 
|  | { | 
|  | printk(KERN_ERR "%s: Non-ADD RELOCATION unsupported\n", me->name); | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | /* r2 is the TOC pointer: it actually points 0x8000 into the TOC (this | 
|  | gives the value maximum span in an instruction which uses a signed | 
|  | offset) */ | 
|  | static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me) | 
|  | { | 
|  | return sechdrs[me->arch.toc_section].sh_addr + 0x8000; | 
|  | } | 
|  |  | 
|  | /* Both low and high 16 bits are added as SIGNED additions, so if low | 
|  | 16 bits has high bit set, high 16 bits must be adjusted.  These | 
|  | macros do that (stolen from binutils). */ | 
|  | #define PPC_LO(v) ((v) & 0xffff) | 
|  | #define PPC_HI(v) (((v) >> 16) & 0xffff) | 
|  | #define PPC_HA(v) PPC_HI ((v) + 0x8000) | 
|  |  | 
|  | /* Patch stub to reference function and correct r2 value. */ | 
|  | static inline int create_stub(Elf64_Shdr *sechdrs, | 
|  | struct ppc64_stub_entry *entry, | 
|  | struct ppc64_opd_entry *opd, | 
|  | struct module *me) | 
|  | { | 
|  | Elf64_Half *loc1, *loc2; | 
|  | long reladdr; | 
|  |  | 
|  | *entry = ppc64_stub; | 
|  |  | 
|  | loc1 = (Elf64_Half *)&entry->jump[2]; | 
|  | loc2 = (Elf64_Half *)&entry->jump[6]; | 
|  |  | 
|  | /* Stub uses address relative to r2. */ | 
|  | reladdr = (unsigned long)entry - my_r2(sechdrs, me); | 
|  | if (reladdr > 0x7FFFFFFF || reladdr < -(0x80000000L)) { | 
|  | printk("%s: Address %p of stub out of range of %p.\n", | 
|  | me->name, (void *)reladdr, (void *)my_r2); | 
|  | return 0; | 
|  | } | 
|  | DEBUGP("Stub %p get data from reladdr %li\n", entry, reladdr); | 
|  |  | 
|  | *loc1 = PPC_HA(reladdr); | 
|  | *loc2 = PPC_LO(reladdr); | 
|  | entry->opd.funcaddr = opd->funcaddr; | 
|  | entry->opd.r2 = opd->r2; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Create stub to jump to function described in this OPD: we need the | 
|  | stub to set up the TOC ptr (r2) for the function. */ | 
|  | static unsigned long stub_for_addr(Elf64_Shdr *sechdrs, | 
|  | unsigned long opdaddr, | 
|  | struct module *me) | 
|  | { | 
|  | struct ppc64_stub_entry *stubs; | 
|  | struct ppc64_opd_entry *opd = (void *)opdaddr; | 
|  | unsigned int i, num_stubs; | 
|  |  | 
|  | num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*stubs); | 
|  |  | 
|  | /* Find this stub, or if that fails, the next avail. entry */ | 
|  | stubs = (void *)sechdrs[me->arch.stubs_section].sh_addr; | 
|  | for (i = 0; stubs[i].opd.funcaddr; i++) { | 
|  | BUG_ON(i >= num_stubs); | 
|  |  | 
|  | if (stubs[i].opd.funcaddr == opd->funcaddr) | 
|  | return (unsigned long)&stubs[i]; | 
|  | } | 
|  |  | 
|  | if (!create_stub(sechdrs, &stubs[i], opd, me)) | 
|  | return 0; | 
|  |  | 
|  | return (unsigned long)&stubs[i]; | 
|  | } | 
|  |  | 
|  | /* We expect a noop next: if it is, replace it with instruction to | 
|  | restore r2. */ | 
|  | static int restore_r2(u32 *instruction, struct module *me) | 
|  | { | 
|  | if (*instruction != PPC_INST_NOP) { | 
|  | printk("%s: Expect noop after relocate, got %08x\n", | 
|  | me->name, *instruction); | 
|  | return 0; | 
|  | } | 
|  | *instruction = 0xe8410028;	/* ld r2,40(r1) */ | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | int apply_relocate_add(Elf64_Shdr *sechdrs, | 
|  | const char *strtab, | 
|  | unsigned int symindex, | 
|  | unsigned int relsec, | 
|  | struct module *me) | 
|  | { | 
|  | unsigned int i; | 
|  | Elf64_Rela *rela = (void *)sechdrs[relsec].sh_addr; | 
|  | Elf64_Sym *sym; | 
|  | unsigned long *location; | 
|  | unsigned long value; | 
|  |  | 
|  | DEBUGP("Applying ADD relocate section %u to %u\n", relsec, | 
|  | sechdrs[relsec].sh_info); | 
|  | for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { | 
|  | /* This is where to make the change */ | 
|  | location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr | 
|  | + rela[i].r_offset; | 
|  | /* This is the symbol it is referring to */ | 
|  | sym = (Elf64_Sym *)sechdrs[symindex].sh_addr | 
|  | + ELF64_R_SYM(rela[i].r_info); | 
|  |  | 
|  | DEBUGP("RELOC at %p: %li-type as %s (%lu) + %li\n", | 
|  | location, (long)ELF64_R_TYPE(rela[i].r_info), | 
|  | strtab + sym->st_name, (unsigned long)sym->st_value, | 
|  | (long)rela[i].r_addend); | 
|  |  | 
|  | /* `Everything is relative'. */ | 
|  | value = sym->st_value + rela[i].r_addend; | 
|  |  | 
|  | switch (ELF64_R_TYPE(rela[i].r_info)) { | 
|  | case R_PPC64_ADDR32: | 
|  | /* Simply set it */ | 
|  | *(u32 *)location = value; | 
|  | break; | 
|  |  | 
|  | case R_PPC64_ADDR64: | 
|  | /* Simply set it */ | 
|  | *(unsigned long *)location = value; | 
|  | break; | 
|  |  | 
|  | case R_PPC64_TOC: | 
|  | *(unsigned long *)location = my_r2(sechdrs, me); | 
|  | break; | 
|  |  | 
|  | case R_PPC64_TOC16: | 
|  | /* Subtract TOC pointer */ | 
|  | value -= my_r2(sechdrs, me); | 
|  | if (value + 0x8000 > 0xffff) { | 
|  | printk("%s: bad TOC16 relocation (%lu)\n", | 
|  | me->name, value); | 
|  | return -ENOEXEC; | 
|  | } | 
|  | *((uint16_t *) location) | 
|  | = (*((uint16_t *) location) & ~0xffff) | 
|  | | (value & 0xffff); | 
|  | break; | 
|  |  | 
|  | case R_PPC64_TOC16_DS: | 
|  | /* Subtract TOC pointer */ | 
|  | value -= my_r2(sechdrs, me); | 
|  | if ((value & 3) != 0 || value + 0x8000 > 0xffff) { | 
|  | printk("%s: bad TOC16_DS relocation (%lu)\n", | 
|  | me->name, value); | 
|  | return -ENOEXEC; | 
|  | } | 
|  | *((uint16_t *) location) | 
|  | = (*((uint16_t *) location) & ~0xfffc) | 
|  | | (value & 0xfffc); | 
|  | break; | 
|  |  | 
|  | case R_PPC_REL24: | 
|  | /* FIXME: Handle weak symbols here --RR */ | 
|  | if (sym->st_shndx == SHN_UNDEF) { | 
|  | /* External: go via stub */ | 
|  | value = stub_for_addr(sechdrs, value, me); | 
|  | if (!value) | 
|  | return -ENOENT; | 
|  | if (!restore_r2((u32 *)location + 1, me)) | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | /* Convert value to relative */ | 
|  | value -= (unsigned long)location; | 
|  | if (value + 0x2000000 > 0x3ffffff || (value & 3) != 0){ | 
|  | printk("%s: REL24 %li out of range!\n", | 
|  | me->name, (long int)value); | 
|  | return -ENOEXEC; | 
|  | } | 
|  |  | 
|  | /* Only replace bits 2 through 26 */ | 
|  | *(uint32_t *)location | 
|  | = (*(uint32_t *)location & ~0x03fffffc) | 
|  | | (value & 0x03fffffc); | 
|  | break; | 
|  |  | 
|  | case R_PPC64_REL64: | 
|  | /* 64 bits relative (used by features fixups) */ | 
|  | *location = value - (unsigned long)location; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | printk("%s: Unknown ADD relocation: %lu\n", | 
|  | me->name, | 
|  | (unsigned long)ELF64_R_TYPE(rela[i].r_info)); | 
|  | return -ENOEXEC; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_DYNAMIC_FTRACE | 
|  | me->arch.toc = my_r2(sechdrs, me); | 
|  | me->arch.tramp = stub_for_addr(sechdrs, | 
|  | (unsigned long)ftrace_caller, | 
|  | me); | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } |