[ARM] S3C24XX: GPIO: Remove pin specific input and output defines
The use of S3C2410_GP[A-Z]x_INP and S3C2410_GP[A-Z]x_OUTP are
very rare and are taking up large amounts of space in the
regs-gpio.h header.
The GPIO layer has had generic input and out defines called
S3C2410_GPIO_INPUT and S3C2410_GPIO_OUTPUT for a while which work
for all S3C24XX GPIOs.
Do the following replacements:
S3C2410_GP[A-Z][0-9]*_\OUTP => S3C2410_GPIO_OUTPUT
S3C2410_GP[A-Z][0-9]*_\INP => /S3C2410_GPIO_INPUT
S3C2410_GPA[0-9]*_OUT => S3C2410_GPIO_OUTPUT
to remove any usages of these and prepare the header for
the removal of these.
The following command was used to acheive this:
find . -type f -writable ! -name regs-gpio.h ! -name "*~" | xargs sed -i~ -e 's/S3C2410_GP[A-Z][0-9]*_\OUTP/S3C2410_GPIO_OUTPUT/g' -e 's/S3C2410_GP[A-Z][0-9]*_\INP/S3C2410_GPIO_INPUT/g' -e 's/S3C2410_GPA[0-9]*_OUT/S3C2410_GPIO_OUTPUT/g'
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 1a8347c..ef4c8fd 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -184,10 +184,10 @@
{
/* Configure the LEDs (even if we have no LED support)*/
- s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
- s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
- s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
- s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
+ s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPF4, 1);
s3c2410_gpio_setpin(S3C2410_GPF5, 1);