|  | /* | 
|  | * Copyright (C) ST-Ericsson AB 2010 | 
|  | * Contact: Sjur Brendeland / sjur.brandeland@stericsson.com | 
|  | * Author:  Daniel Martensson / Daniel.Martensson@stericsson.com | 
|  | * License terms: GNU General Public License (GPL) version 2. | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/completion.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/debugfs.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <net/caif/caif_layer.h> | 
|  | #include <net/caif/caif_spi.h> | 
|  |  | 
|  | #ifndef CONFIG_CAIF_SPI_SYNC | 
|  | #define FLAVOR "Flavour: Vanilla.\n" | 
|  | #else | 
|  | #define FLAVOR "Flavour: Master CMD&LEN at start.\n" | 
|  | #endif /* CONFIG_CAIF_SPI_SYNC */ | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Daniel Martensson<daniel.martensson@stericsson.com>"); | 
|  | MODULE_DESCRIPTION("CAIF SPI driver"); | 
|  |  | 
|  | /* Returns the number of padding bytes for alignment. */ | 
|  | #define PAD_POW2(x, pow) ((((x)&((pow)-1))==0) ? 0 : (((pow)-((x)&((pow)-1))))) | 
|  |  | 
|  | static int spi_loop; | 
|  | module_param(spi_loop, bool, S_IRUGO); | 
|  | MODULE_PARM_DESC(spi_loop, "SPI running in loopback mode."); | 
|  |  | 
|  | /* SPI frame alignment. */ | 
|  | module_param(spi_frm_align, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(spi_frm_align, "SPI frame alignment."); | 
|  |  | 
|  | /* | 
|  | * SPI padding options. | 
|  | * Warning: must be a base of 2 (& operation used) and can not be zero ! | 
|  | */ | 
|  | module_param(spi_up_head_align, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(spi_up_head_align, "SPI uplink head alignment."); | 
|  |  | 
|  | module_param(spi_up_tail_align, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(spi_up_tail_align, "SPI uplink tail alignment."); | 
|  |  | 
|  | module_param(spi_down_head_align, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(spi_down_head_align, "SPI downlink head alignment."); | 
|  |  | 
|  | module_param(spi_down_tail_align, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(spi_down_tail_align, "SPI downlink tail alignment."); | 
|  |  | 
|  | #ifdef CONFIG_ARM | 
|  | #define BYTE_HEX_FMT "%02X" | 
|  | #else | 
|  | #define BYTE_HEX_FMT "%02hhX" | 
|  | #endif | 
|  |  | 
|  | #define SPI_MAX_PAYLOAD_SIZE 4096 | 
|  | /* | 
|  | * Threshold values for the SPI packet queue. Flowcontrol will be asserted | 
|  | * when the number of packets exceeds HIGH_WATER_MARK. It will not be | 
|  | * deasserted before the number of packets drops below LOW_WATER_MARK. | 
|  | */ | 
|  | #define LOW_WATER_MARK   100 | 
|  | #define HIGH_WATER_MARK  (LOW_WATER_MARK*5) | 
|  |  | 
|  | #ifdef CONFIG_UML | 
|  |  | 
|  | /* | 
|  | * We sometimes use UML for debugging, but it cannot handle | 
|  | * dma_alloc_coherent so we have to wrap it. | 
|  | */ | 
|  | static inline void *dma_alloc(dma_addr_t *daddr) | 
|  | { | 
|  | return kmalloc(SPI_DMA_BUF_LEN, GFP_KERNEL); | 
|  | } | 
|  |  | 
|  | static inline void dma_free(void *cpu_addr, dma_addr_t handle) | 
|  | { | 
|  | kfree(cpu_addr); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static inline void *dma_alloc(dma_addr_t *daddr) | 
|  | { | 
|  | return dma_alloc_coherent(NULL, SPI_DMA_BUF_LEN, daddr, | 
|  | GFP_KERNEL); | 
|  | } | 
|  |  | 
|  | static inline void dma_free(void *cpu_addr, dma_addr_t handle) | 
|  | { | 
|  | dma_free_coherent(NULL, SPI_DMA_BUF_LEN, cpu_addr, handle); | 
|  | } | 
|  | #endif	/* CONFIG_UML */ | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  |  | 
|  | #define DEBUGFS_BUF_SIZE	4096 | 
|  |  | 
|  | static struct dentry *dbgfs_root; | 
|  |  | 
|  | static inline void driver_debugfs_create(void) | 
|  | { | 
|  | dbgfs_root = debugfs_create_dir(cfspi_spi_driver.driver.name, NULL); | 
|  | } | 
|  |  | 
|  | static inline void driver_debugfs_remove(void) | 
|  | { | 
|  | debugfs_remove(dbgfs_root); | 
|  | } | 
|  |  | 
|  | static inline void dev_debugfs_rem(struct cfspi *cfspi) | 
|  | { | 
|  | debugfs_remove(cfspi->dbgfs_frame); | 
|  | debugfs_remove(cfspi->dbgfs_state); | 
|  | debugfs_remove(cfspi->dbgfs_dir); | 
|  | } | 
|  |  | 
|  | static int dbgfs_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | file->private_data = inode->i_private; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ssize_t dbgfs_state(struct file *file, char __user *user_buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | char *buf; | 
|  | int len = 0; | 
|  | ssize_t size; | 
|  | struct cfspi *cfspi = file->private_data; | 
|  |  | 
|  | buf = kzalloc(DEBUGFS_BUF_SIZE, GFP_KERNEL); | 
|  | if (!buf) | 
|  | return 0; | 
|  |  | 
|  | /* Print out debug information. */ | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "CAIF SPI debug information:\n"); | 
|  |  | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), FLAVOR); | 
|  |  | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "STATE: %d\n", cfspi->dbg_state); | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "Previous CMD: 0x%x\n", cfspi->pcmd); | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "Current CMD: 0x%x\n", cfspi->cmd); | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "Previous TX len: %d\n", cfspi->tx_ppck_len); | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "Previous RX len: %d\n", cfspi->rx_ppck_len); | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "Current TX len: %d\n", cfspi->tx_cpck_len); | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "Current RX len: %d\n", cfspi->rx_cpck_len); | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "Next TX len: %d\n", cfspi->tx_npck_len); | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "Next RX len: %d\n", cfspi->rx_npck_len); | 
|  |  | 
|  | if (len > DEBUGFS_BUF_SIZE) | 
|  | len = DEBUGFS_BUF_SIZE; | 
|  |  | 
|  | size = simple_read_from_buffer(user_buf, count, ppos, buf, len); | 
|  | kfree(buf); | 
|  |  | 
|  | return size; | 
|  | } | 
|  |  | 
|  | static ssize_t print_frame(char *buf, size_t size, char *frm, | 
|  | size_t count, size_t cut) | 
|  | { | 
|  | int len = 0; | 
|  | int i; | 
|  | for (i = 0; i < count; i++) { | 
|  | len += snprintf((buf + len), (size - len), | 
|  | "[0x" BYTE_HEX_FMT "]", | 
|  | frm[i]); | 
|  | if ((i == cut) && (count > (cut * 2))) { | 
|  | /* Fast forward. */ | 
|  | i = count - cut; | 
|  | len += snprintf((buf + len), (size - len), | 
|  | "--- %u bytes skipped ---\n", | 
|  | (int)(count - (cut * 2))); | 
|  | } | 
|  |  | 
|  | if ((!(i % 10)) && i) { | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "\n"); | 
|  | } | 
|  | } | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), "\n"); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static ssize_t dbgfs_frame(struct file *file, char __user *user_buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | char *buf; | 
|  | int len = 0; | 
|  | ssize_t size; | 
|  | struct cfspi *cfspi; | 
|  |  | 
|  | cfspi = file->private_data; | 
|  | buf = kzalloc(DEBUGFS_BUF_SIZE, GFP_KERNEL); | 
|  | if (!buf) | 
|  | return 0; | 
|  |  | 
|  | /* Print out debug information. */ | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "Current frame:\n"); | 
|  |  | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "Tx data (Len: %d):\n", cfspi->tx_cpck_len); | 
|  |  | 
|  | len += print_frame((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | cfspi->xfer.va_tx, | 
|  | (cfspi->tx_cpck_len + SPI_CMD_SZ), 100); | 
|  |  | 
|  | len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | "Rx data (Len: %d):\n", cfspi->rx_cpck_len); | 
|  |  | 
|  | len += print_frame((buf + len), (DEBUGFS_BUF_SIZE - len), | 
|  | cfspi->xfer.va_rx, | 
|  | (cfspi->rx_cpck_len + SPI_CMD_SZ), 100); | 
|  |  | 
|  | size = simple_read_from_buffer(user_buf, count, ppos, buf, len); | 
|  | kfree(buf); | 
|  |  | 
|  | return size; | 
|  | } | 
|  |  | 
|  | static const struct file_operations dbgfs_state_fops = { | 
|  | .open = dbgfs_open, | 
|  | .read = dbgfs_state, | 
|  | .owner = THIS_MODULE | 
|  | }; | 
|  |  | 
|  | static const struct file_operations dbgfs_frame_fops = { | 
|  | .open = dbgfs_open, | 
|  | .read = dbgfs_frame, | 
|  | .owner = THIS_MODULE | 
|  | }; | 
|  |  | 
|  | static inline void dev_debugfs_add(struct cfspi *cfspi) | 
|  | { | 
|  | cfspi->dbgfs_dir = debugfs_create_dir(cfspi->pdev->name, dbgfs_root); | 
|  | cfspi->dbgfs_state = debugfs_create_file("state", S_IRUGO, | 
|  | cfspi->dbgfs_dir, cfspi, | 
|  | &dbgfs_state_fops); | 
|  | cfspi->dbgfs_frame = debugfs_create_file("frame", S_IRUGO, | 
|  | cfspi->dbgfs_dir, cfspi, | 
|  | &dbgfs_frame_fops); | 
|  | } | 
|  |  | 
|  | inline void cfspi_dbg_state(struct cfspi *cfspi, int state) | 
|  | { | 
|  | cfspi->dbg_state = state; | 
|  | }; | 
|  | #else | 
|  |  | 
|  | static inline void driver_debugfs_create(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | static inline void driver_debugfs_remove(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | static inline void dev_debugfs_add(struct cfspi *cfspi) | 
|  | { | 
|  | } | 
|  |  | 
|  | static inline void dev_debugfs_rem(struct cfspi *cfspi) | 
|  | { | 
|  | } | 
|  |  | 
|  | inline void cfspi_dbg_state(struct cfspi *cfspi, int state) | 
|  | { | 
|  | } | 
|  | #endif				/* CONFIG_DEBUG_FS */ | 
|  |  | 
|  | static LIST_HEAD(cfspi_list); | 
|  | static spinlock_t cfspi_list_lock; | 
|  |  | 
|  | /* SPI uplink head alignment. */ | 
|  | static ssize_t show_up_head_align(struct device_driver *driver, char *buf) | 
|  | { | 
|  | return sprintf(buf, "%d\n", spi_up_head_align); | 
|  | } | 
|  |  | 
|  | static DRIVER_ATTR(up_head_align, S_IRUSR, show_up_head_align, NULL); | 
|  |  | 
|  | /* SPI uplink tail alignment. */ | 
|  | static ssize_t show_up_tail_align(struct device_driver *driver, char *buf) | 
|  | { | 
|  | return sprintf(buf, "%d\n", spi_up_tail_align); | 
|  | } | 
|  |  | 
|  | static DRIVER_ATTR(up_tail_align, S_IRUSR, show_up_tail_align, NULL); | 
|  |  | 
|  | /* SPI downlink head alignment. */ | 
|  | static ssize_t show_down_head_align(struct device_driver *driver, char *buf) | 
|  | { | 
|  | return sprintf(buf, "%d\n", spi_down_head_align); | 
|  | } | 
|  |  | 
|  | static DRIVER_ATTR(down_head_align, S_IRUSR, show_down_head_align, NULL); | 
|  |  | 
|  | /* SPI downlink tail alignment. */ | 
|  | static ssize_t show_down_tail_align(struct device_driver *driver, char *buf) | 
|  | { | 
|  | return sprintf(buf, "%d\n", spi_down_tail_align); | 
|  | } | 
|  |  | 
|  | static DRIVER_ATTR(down_tail_align, S_IRUSR, show_down_tail_align, NULL); | 
|  |  | 
|  | /* SPI frame alignment. */ | 
|  | static ssize_t show_frame_align(struct device_driver *driver, char *buf) | 
|  | { | 
|  | return sprintf(buf, "%d\n", spi_frm_align); | 
|  | } | 
|  |  | 
|  | static DRIVER_ATTR(frame_align, S_IRUSR, show_frame_align, NULL); | 
|  |  | 
|  | int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len) | 
|  | { | 
|  | u8 *dst = buf; | 
|  | caif_assert(buf); | 
|  |  | 
|  | if (cfspi->slave && !cfspi->slave_talked) | 
|  | cfspi->slave_talked = true; | 
|  |  | 
|  | do { | 
|  | struct sk_buff *skb; | 
|  | struct caif_payload_info *info; | 
|  | int spad = 0; | 
|  | int epad; | 
|  |  | 
|  | skb = skb_dequeue(&cfspi->chead); | 
|  | if (!skb) | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * Calculate length of frame including SPI padding. | 
|  | * The payload position is found in the control buffer. | 
|  | */ | 
|  | info = (struct caif_payload_info *)&skb->cb; | 
|  |  | 
|  | /* | 
|  | * Compute head offset i.e. number of bytes to add to | 
|  | * get the start of the payload aligned. | 
|  | */ | 
|  | if (spi_up_head_align > 1) { | 
|  | spad = 1 + PAD_POW2((info->hdr_len + 1), spi_up_head_align); | 
|  | *dst = (u8)(spad - 1); | 
|  | dst += spad; | 
|  | } | 
|  |  | 
|  | /* Copy in CAIF frame. */ | 
|  | skb_copy_bits(skb, 0, dst, skb->len); | 
|  | dst += skb->len; | 
|  | cfspi->ndev->stats.tx_packets++; | 
|  | cfspi->ndev->stats.tx_bytes += skb->len; | 
|  |  | 
|  | /* | 
|  | * Compute tail offset i.e. number of bytes to add to | 
|  | * get the complete CAIF frame aligned. | 
|  | */ | 
|  | epad = PAD_POW2((skb->len + spad), spi_up_tail_align); | 
|  | dst += epad; | 
|  |  | 
|  | dev_kfree_skb(skb); | 
|  |  | 
|  | } while ((dst - buf) < len); | 
|  |  | 
|  | return dst - buf; | 
|  | } | 
|  |  | 
|  | int cfspi_xmitlen(struct cfspi *cfspi) | 
|  | { | 
|  | struct sk_buff *skb = NULL; | 
|  | int frm_len = 0; | 
|  | int pkts = 0; | 
|  |  | 
|  | /* | 
|  | * Decommit previously committed frames. | 
|  | * skb_queue_splice_tail(&cfspi->chead,&cfspi->qhead) | 
|  | */ | 
|  | while (skb_peek(&cfspi->chead)) { | 
|  | skb = skb_dequeue_tail(&cfspi->chead); | 
|  | skb_queue_head(&cfspi->qhead, skb); | 
|  | } | 
|  |  | 
|  | do { | 
|  | struct caif_payload_info *info = NULL; | 
|  | int spad = 0; | 
|  | int epad = 0; | 
|  |  | 
|  | skb = skb_dequeue(&cfspi->qhead); | 
|  | if (!skb) | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * Calculate length of frame including SPI padding. | 
|  | * The payload position is found in the control buffer. | 
|  | */ | 
|  | info = (struct caif_payload_info *)&skb->cb; | 
|  |  | 
|  | /* | 
|  | * Compute head offset i.e. number of bytes to add to | 
|  | * get the start of the payload aligned. | 
|  | */ | 
|  | if (spi_up_head_align > 1) | 
|  | spad = 1 + PAD_POW2((info->hdr_len + 1), spi_up_head_align); | 
|  |  | 
|  | /* | 
|  | * Compute tail offset i.e. number of bytes to add to | 
|  | * get the complete CAIF frame aligned. | 
|  | */ | 
|  | epad = PAD_POW2((skb->len + spad), spi_up_tail_align); | 
|  |  | 
|  | if ((skb->len + spad + epad + frm_len) <= CAIF_MAX_SPI_FRAME) { | 
|  | skb_queue_tail(&cfspi->chead, skb); | 
|  | pkts++; | 
|  | frm_len += skb->len + spad + epad; | 
|  | } else { | 
|  | /* Put back packet. */ | 
|  | skb_queue_head(&cfspi->qhead, skb); | 
|  | break; | 
|  | } | 
|  | } while (pkts <= CAIF_MAX_SPI_PKTS); | 
|  |  | 
|  | /* | 
|  | * Send flow on if previously sent flow off | 
|  | * and now go below the low water mark | 
|  | */ | 
|  | if (cfspi->flow_off_sent && cfspi->qhead.qlen < cfspi->qd_low_mark && | 
|  | cfspi->cfdev.flowctrl) { | 
|  | cfspi->flow_off_sent = 0; | 
|  | cfspi->cfdev.flowctrl(cfspi->ndev, 1); | 
|  | } | 
|  |  | 
|  | return frm_len; | 
|  | } | 
|  |  | 
|  | static void cfspi_ss_cb(bool assert, struct cfspi_ifc *ifc) | 
|  | { | 
|  | struct cfspi *cfspi = (struct cfspi *)ifc->priv; | 
|  |  | 
|  | /* | 
|  | * The slave device is the master on the link. Interrupts before the | 
|  | * slave has transmitted are considered spurious. | 
|  | */ | 
|  | if (cfspi->slave && !cfspi->slave_talked) { | 
|  | printk(KERN_WARNING "CFSPI: Spurious SS interrupt.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!in_interrupt()) | 
|  | spin_lock(&cfspi->lock); | 
|  | if (assert) { | 
|  | set_bit(SPI_SS_ON, &cfspi->state); | 
|  | set_bit(SPI_XFER, &cfspi->state); | 
|  | } else { | 
|  | set_bit(SPI_SS_OFF, &cfspi->state); | 
|  | } | 
|  | if (!in_interrupt()) | 
|  | spin_unlock(&cfspi->lock); | 
|  |  | 
|  | /* Wake up the xfer thread. */ | 
|  | if (assert) | 
|  | wake_up_interruptible(&cfspi->wait); | 
|  | } | 
|  |  | 
|  | static void cfspi_xfer_done_cb(struct cfspi_ifc *ifc) | 
|  | { | 
|  | struct cfspi *cfspi = (struct cfspi *)ifc->priv; | 
|  |  | 
|  | /* Transfer done, complete work queue */ | 
|  | complete(&cfspi->comp); | 
|  | } | 
|  |  | 
|  | static int cfspi_xmit(struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | struct cfspi *cfspi = NULL; | 
|  | unsigned long flags; | 
|  | if (!dev) | 
|  | return -EINVAL; | 
|  |  | 
|  | cfspi = netdev_priv(dev); | 
|  |  | 
|  | skb_queue_tail(&cfspi->qhead, skb); | 
|  |  | 
|  | spin_lock_irqsave(&cfspi->lock, flags); | 
|  | if (!test_and_set_bit(SPI_XFER, &cfspi->state)) { | 
|  | /* Wake up xfer thread. */ | 
|  | wake_up_interruptible(&cfspi->wait); | 
|  | } | 
|  | spin_unlock_irqrestore(&cfspi->lock, flags); | 
|  |  | 
|  | /* Send flow off if number of bytes is above high water mark */ | 
|  | if (!cfspi->flow_off_sent && | 
|  | cfspi->qhead.qlen > cfspi->qd_high_mark && | 
|  | cfspi->cfdev.flowctrl) { | 
|  | cfspi->flow_off_sent = 1; | 
|  | cfspi->cfdev.flowctrl(cfspi->ndev, 0); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len) | 
|  | { | 
|  | u8 *src = buf; | 
|  |  | 
|  | caif_assert(buf != NULL); | 
|  |  | 
|  | do { | 
|  | int res; | 
|  | struct sk_buff *skb = NULL; | 
|  | int spad = 0; | 
|  | int epad = 0; | 
|  | u8 *dst = NULL; | 
|  | int pkt_len = 0; | 
|  |  | 
|  | /* | 
|  | * Compute head offset i.e. number of bytes added to | 
|  | * get the start of the payload aligned. | 
|  | */ | 
|  | if (spi_down_head_align > 1) { | 
|  | spad = 1 + *src; | 
|  | src += spad; | 
|  | } | 
|  |  | 
|  | /* Read length of CAIF frame (little endian). */ | 
|  | pkt_len = *src; | 
|  | pkt_len |= ((*(src+1)) << 8) & 0xFF00; | 
|  | pkt_len += 2;	/* Add FCS fields. */ | 
|  |  | 
|  | /* Get a suitable caif packet and copy in data. */ | 
|  |  | 
|  | skb = netdev_alloc_skb(cfspi->ndev, pkt_len + 1); | 
|  | caif_assert(skb != NULL); | 
|  |  | 
|  | dst = skb_put(skb, pkt_len); | 
|  | memcpy(dst, src, pkt_len); | 
|  | src += pkt_len; | 
|  |  | 
|  | skb->protocol = htons(ETH_P_CAIF); | 
|  | skb_reset_mac_header(skb); | 
|  | skb->dev = cfspi->ndev; | 
|  |  | 
|  | /* | 
|  | * Push received packet up the stack. | 
|  | */ | 
|  | if (!spi_loop) | 
|  | res = netif_rx_ni(skb); | 
|  | else | 
|  | res = cfspi_xmit(skb, cfspi->ndev); | 
|  |  | 
|  | if (!res) { | 
|  | cfspi->ndev->stats.rx_packets++; | 
|  | cfspi->ndev->stats.rx_bytes += pkt_len; | 
|  | } else | 
|  | cfspi->ndev->stats.rx_dropped++; | 
|  |  | 
|  | /* | 
|  | * Compute tail offset i.e. number of bytes added to | 
|  | * get the complete CAIF frame aligned. | 
|  | */ | 
|  | epad = PAD_POW2((pkt_len + spad), spi_down_tail_align); | 
|  | src += epad; | 
|  | } while ((src - buf) < len); | 
|  |  | 
|  | return src - buf; | 
|  | } | 
|  |  | 
|  | static int cfspi_open(struct net_device *dev) | 
|  | { | 
|  | netif_wake_queue(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cfspi_close(struct net_device *dev) | 
|  | { | 
|  | netif_stop_queue(dev); | 
|  | return 0; | 
|  | } | 
|  | static const struct net_device_ops cfspi_ops = { | 
|  | .ndo_open = cfspi_open, | 
|  | .ndo_stop = cfspi_close, | 
|  | .ndo_start_xmit = cfspi_xmit | 
|  | }; | 
|  |  | 
|  | static void cfspi_setup(struct net_device *dev) | 
|  | { | 
|  | struct cfspi *cfspi = netdev_priv(dev); | 
|  | dev->features = 0; | 
|  | dev->netdev_ops = &cfspi_ops; | 
|  | dev->type = ARPHRD_CAIF; | 
|  | dev->flags = IFF_NOARP | IFF_POINTOPOINT; | 
|  | dev->tx_queue_len = 0; | 
|  | dev->mtu = SPI_MAX_PAYLOAD_SIZE; | 
|  | dev->destructor = free_netdev; | 
|  | skb_queue_head_init(&cfspi->qhead); | 
|  | skb_queue_head_init(&cfspi->chead); | 
|  | cfspi->cfdev.link_select = CAIF_LINK_HIGH_BANDW; | 
|  | cfspi->cfdev.use_frag = false; | 
|  | cfspi->cfdev.use_stx = false; | 
|  | cfspi->cfdev.use_fcs = false; | 
|  | cfspi->ndev = dev; | 
|  | } | 
|  |  | 
|  | int cfspi_spi_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct cfspi *cfspi = NULL; | 
|  | struct net_device *ndev; | 
|  | struct cfspi_dev *dev; | 
|  | int res; | 
|  | dev = (struct cfspi_dev *)pdev->dev.platform_data; | 
|  |  | 
|  | ndev = alloc_netdev(sizeof(struct cfspi), | 
|  | "cfspi%d", cfspi_setup); | 
|  | if (!ndev) | 
|  | return -ENOMEM; | 
|  |  | 
|  | cfspi = netdev_priv(ndev); | 
|  | netif_stop_queue(ndev); | 
|  | cfspi->ndev = ndev; | 
|  | cfspi->pdev = pdev; | 
|  |  | 
|  | /* Set flow info. */ | 
|  | cfspi->flow_off_sent = 0; | 
|  | cfspi->qd_low_mark = LOW_WATER_MARK; | 
|  | cfspi->qd_high_mark = HIGH_WATER_MARK; | 
|  |  | 
|  | /* Set slave info. */ | 
|  | if (!strncmp(cfspi_spi_driver.driver.name, "cfspi_sspi", 10)) { | 
|  | cfspi->slave = true; | 
|  | cfspi->slave_talked = false; | 
|  | } else { | 
|  | cfspi->slave = false; | 
|  | cfspi->slave_talked = false; | 
|  | } | 
|  |  | 
|  | /* Assign the SPI device. */ | 
|  | cfspi->dev = dev; | 
|  | /* Assign the device ifc to this SPI interface. */ | 
|  | dev->ifc = &cfspi->ifc; | 
|  |  | 
|  | /* Allocate DMA buffers. */ | 
|  | cfspi->xfer.va_tx = dma_alloc(&cfspi->xfer.pa_tx); | 
|  | if (!cfspi->xfer.va_tx) { | 
|  | res = -ENODEV; | 
|  | goto err_dma_alloc_tx; | 
|  | } | 
|  |  | 
|  | cfspi->xfer.va_rx = dma_alloc(&cfspi->xfer.pa_rx); | 
|  |  | 
|  | if (!cfspi->xfer.va_rx) { | 
|  | res = -ENODEV; | 
|  | goto err_dma_alloc_rx; | 
|  | } | 
|  |  | 
|  | /* Initialize the work queue. */ | 
|  | INIT_WORK(&cfspi->work, cfspi_xfer); | 
|  |  | 
|  | /* Initialize spin locks. */ | 
|  | spin_lock_init(&cfspi->lock); | 
|  |  | 
|  | /* Initialize flow control state. */ | 
|  | cfspi->flow_stop = false; | 
|  |  | 
|  | /* Initialize wait queue. */ | 
|  | init_waitqueue_head(&cfspi->wait); | 
|  |  | 
|  | /* Create work thread. */ | 
|  | cfspi->wq = create_singlethread_workqueue(dev->name); | 
|  | if (!cfspi->wq) { | 
|  | printk(KERN_WARNING "CFSPI: failed to create work queue.\n"); | 
|  | res = -ENODEV; | 
|  | goto err_create_wq; | 
|  | } | 
|  |  | 
|  | /* Initialize work queue. */ | 
|  | init_completion(&cfspi->comp); | 
|  |  | 
|  | /* Create debugfs entries. */ | 
|  | dev_debugfs_add(cfspi); | 
|  |  | 
|  | /* Set up the ifc. */ | 
|  | cfspi->ifc.ss_cb = cfspi_ss_cb; | 
|  | cfspi->ifc.xfer_done_cb = cfspi_xfer_done_cb; | 
|  | cfspi->ifc.priv = cfspi; | 
|  |  | 
|  | /* Add CAIF SPI device to list. */ | 
|  | spin_lock(&cfspi_list_lock); | 
|  | list_add_tail(&cfspi->list, &cfspi_list); | 
|  | spin_unlock(&cfspi_list_lock); | 
|  |  | 
|  | /* Schedule the work queue. */ | 
|  | queue_work(cfspi->wq, &cfspi->work); | 
|  |  | 
|  | /* Register network device. */ | 
|  | res = register_netdev(ndev); | 
|  | if (res) { | 
|  | printk(KERN_ERR "CFSPI: Reg. error: %d.\n", res); | 
|  | goto err_net_reg; | 
|  | } | 
|  | return res; | 
|  |  | 
|  | err_net_reg: | 
|  | dev_debugfs_rem(cfspi); | 
|  | set_bit(SPI_TERMINATE, &cfspi->state); | 
|  | wake_up_interruptible(&cfspi->wait); | 
|  | destroy_workqueue(cfspi->wq); | 
|  | err_create_wq: | 
|  | dma_free(cfspi->xfer.va_rx, cfspi->xfer.pa_rx); | 
|  | err_dma_alloc_rx: | 
|  | dma_free(cfspi->xfer.va_tx, cfspi->xfer.pa_tx); | 
|  | err_dma_alloc_tx: | 
|  | free_netdev(ndev); | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | int cfspi_spi_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct list_head *list_node; | 
|  | struct list_head *n; | 
|  | struct cfspi *cfspi = NULL; | 
|  | struct cfspi_dev *dev; | 
|  |  | 
|  | dev = (struct cfspi_dev *)pdev->dev.platform_data; | 
|  | spin_lock(&cfspi_list_lock); | 
|  | list_for_each_safe(list_node, n, &cfspi_list) { | 
|  | cfspi = list_entry(list_node, struct cfspi, list); | 
|  | /* Find the corresponding device. */ | 
|  | if (cfspi->dev == dev) { | 
|  | /* Remove from list. */ | 
|  | list_del(list_node); | 
|  | /* Free DMA buffers. */ | 
|  | dma_free(cfspi->xfer.va_rx, cfspi->xfer.pa_rx); | 
|  | dma_free(cfspi->xfer.va_tx, cfspi->xfer.pa_tx); | 
|  | set_bit(SPI_TERMINATE, &cfspi->state); | 
|  | wake_up_interruptible(&cfspi->wait); | 
|  | destroy_workqueue(cfspi->wq); | 
|  | /* Destroy debugfs directory and files. */ | 
|  | dev_debugfs_rem(cfspi); | 
|  | unregister_netdev(cfspi->ndev); | 
|  | spin_unlock(&cfspi_list_lock); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | spin_unlock(&cfspi_list_lock); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static void __exit cfspi_exit_module(void) | 
|  | { | 
|  | struct list_head *list_node; | 
|  | struct list_head *n; | 
|  | struct cfspi *cfspi = NULL; | 
|  |  | 
|  | list_for_each_safe(list_node, n, &cfspi_list) { | 
|  | cfspi = list_entry(list_node, struct cfspi, list); | 
|  | platform_device_unregister(cfspi->pdev); | 
|  | } | 
|  |  | 
|  | /* Destroy sysfs files. */ | 
|  | driver_remove_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_up_head_align); | 
|  | driver_remove_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_up_tail_align); | 
|  | driver_remove_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_down_head_align); | 
|  | driver_remove_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_down_tail_align); | 
|  | driver_remove_file(&cfspi_spi_driver.driver, &driver_attr_frame_align); | 
|  | /* Unregister platform driver. */ | 
|  | platform_driver_unregister(&cfspi_spi_driver); | 
|  | /* Destroy debugfs root directory. */ | 
|  | driver_debugfs_remove(); | 
|  | } | 
|  |  | 
|  | static int __init cfspi_init_module(void) | 
|  | { | 
|  | int result; | 
|  |  | 
|  | /* Initialize spin lock. */ | 
|  | spin_lock_init(&cfspi_list_lock); | 
|  |  | 
|  | /* Register platform driver. */ | 
|  | result = platform_driver_register(&cfspi_spi_driver); | 
|  | if (result) { | 
|  | printk(KERN_ERR "Could not register platform SPI driver.\n"); | 
|  | goto err_dev_register; | 
|  | } | 
|  |  | 
|  | /* Create sysfs files. */ | 
|  | result = | 
|  | driver_create_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_up_head_align); | 
|  | if (result) { | 
|  | printk(KERN_ERR "Sysfs creation failed 1.\n"); | 
|  | goto err_create_up_head_align; | 
|  | } | 
|  |  | 
|  | result = | 
|  | driver_create_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_up_tail_align); | 
|  | if (result) { | 
|  | printk(KERN_ERR "Sysfs creation failed 2.\n"); | 
|  | goto err_create_up_tail_align; | 
|  | } | 
|  |  | 
|  | result = | 
|  | driver_create_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_down_head_align); | 
|  | if (result) { | 
|  | printk(KERN_ERR "Sysfs creation failed 3.\n"); | 
|  | goto err_create_down_head_align; | 
|  | } | 
|  |  | 
|  | result = | 
|  | driver_create_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_down_tail_align); | 
|  | if (result) { | 
|  | printk(KERN_ERR "Sysfs creation failed 4.\n"); | 
|  | goto err_create_down_tail_align; | 
|  | } | 
|  |  | 
|  | result = | 
|  | driver_create_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_frame_align); | 
|  | if (result) { | 
|  | printk(KERN_ERR "Sysfs creation failed 5.\n"); | 
|  | goto err_create_frame_align; | 
|  | } | 
|  | driver_debugfs_create(); | 
|  | return result; | 
|  |  | 
|  | err_create_frame_align: | 
|  | driver_remove_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_down_tail_align); | 
|  | err_create_down_tail_align: | 
|  | driver_remove_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_down_head_align); | 
|  | err_create_down_head_align: | 
|  | driver_remove_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_up_tail_align); | 
|  | err_create_up_tail_align: | 
|  | driver_remove_file(&cfspi_spi_driver.driver, | 
|  | &driver_attr_up_head_align); | 
|  | err_create_up_head_align: | 
|  | err_dev_register: | 
|  | return result; | 
|  | } | 
|  |  | 
|  | module_init(cfspi_init_module); | 
|  | module_exit(cfspi_exit_module); |