| /* | 
 |  * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver | 
 |  * | 
 |  * Copyright (c) 2008-2009 USI Co., Ltd. | 
 |  * All rights reserved. | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions | 
 |  * are met: | 
 |  * 1. Redistributions of source code must retain the above copyright | 
 |  *    notice, this list of conditions, and the following disclaimer, | 
 |  *    without modification. | 
 |  * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
 |  *    substantially similar to the "NO WARRANTY" disclaimer below | 
 |  *    ("Disclaimer") and any redistribution must be conditioned upon | 
 |  *    including a substantially similar Disclaimer requirement for further | 
 |  *    binary redistribution. | 
 |  * 3. Neither the names of the above-listed copyright holders nor the names | 
 |  *    of any contributors may be used to endorse or promote products derived | 
 |  *    from this software without specific prior written permission. | 
 |  * | 
 |  * Alternatively, this software may be distributed under the terms of the | 
 |  * GNU General Public License ("GPL") version 2 as published by the Free | 
 |  * Software Foundation. | 
 |  * | 
 |  * NO WARRANTY | 
 |  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
 |  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
 |  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
 |  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
 |  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
 |  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
 |  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
 |  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
 |  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
 |  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
 |  * POSSIBILITY OF SUCH DAMAGES. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/slab.h> | 
 | #include "pm8001_sas.h" | 
 |  | 
 | /** | 
 |  * pm8001_find_tag - from sas task to find out  tag that belongs to this task | 
 |  * @task: the task sent to the LLDD | 
 |  * @tag: the found tag associated with the task | 
 |  */ | 
 | static int pm8001_find_tag(struct sas_task *task, u32 *tag) | 
 | { | 
 | 	if (task->lldd_task) { | 
 | 		struct pm8001_ccb_info *ccb; | 
 | 		ccb = task->lldd_task; | 
 | 		*tag = ccb->ccb_tag; | 
 | 		return 1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_tag_clear - clear the tags bitmap | 
 |   * @pm8001_ha: our hba struct | 
 |   * @tag: the found tag associated with the task | 
 |   */ | 
 | static void pm8001_tag_clear(struct pm8001_hba_info *pm8001_ha, u32 tag) | 
 | { | 
 | 	void *bitmap = pm8001_ha->tags; | 
 | 	clear_bit(tag, bitmap); | 
 | } | 
 |  | 
 | static void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag) | 
 | { | 
 | 	pm8001_tag_clear(pm8001_ha, tag); | 
 | } | 
 |  | 
 | static void pm8001_tag_set(struct pm8001_hba_info *pm8001_ha, u32 tag) | 
 | { | 
 | 	void *bitmap = pm8001_ha->tags; | 
 | 	set_bit(tag, bitmap); | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_tag_alloc - allocate a empty tag for task used. | 
 |   * @pm8001_ha: our hba struct | 
 |   * @tag_out: the found empty tag . | 
 |   */ | 
 | inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out) | 
 | { | 
 | 	unsigned int index, tag; | 
 | 	void *bitmap = pm8001_ha->tags; | 
 |  | 
 | 	index = find_first_zero_bit(bitmap, pm8001_ha->tags_num); | 
 | 	tag = index; | 
 | 	if (tag >= pm8001_ha->tags_num) | 
 | 		return -SAS_QUEUE_FULL; | 
 | 	pm8001_tag_set(pm8001_ha, tag); | 
 | 	*tag_out = tag; | 
 | 	return 0; | 
 | } | 
 |  | 
 | void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha) | 
 | { | 
 | 	int i; | 
 | 	for (i = 0; i < pm8001_ha->tags_num; ++i) | 
 | 		pm8001_tag_clear(pm8001_ha, i); | 
 | } | 
 |  | 
 |  /** | 
 |   * pm8001_mem_alloc - allocate memory for pm8001. | 
 |   * @pdev: pci device. | 
 |   * @virt_addr: the allocated virtual address | 
 |   * @pphys_addr_hi: the physical address high byte address. | 
 |   * @pphys_addr_lo: the physical address low byte address. | 
 |   * @mem_size: memory size. | 
 |   */ | 
 | int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, | 
 | 	dma_addr_t *pphys_addr, u32 *pphys_addr_hi, | 
 | 	u32 *pphys_addr_lo, u32 mem_size, u32 align) | 
 | { | 
 | 	caddr_t mem_virt_alloc; | 
 | 	dma_addr_t mem_dma_handle; | 
 | 	u64 phys_align; | 
 | 	u64 align_offset = 0; | 
 | 	if (align) | 
 | 		align_offset = (dma_addr_t)align - 1; | 
 | 	mem_virt_alloc = | 
 | 		pci_alloc_consistent(pdev, mem_size + align, &mem_dma_handle); | 
 | 	if (!mem_virt_alloc) { | 
 | 		pm8001_printk("memory allocation error\n"); | 
 | 		return -1; | 
 | 	} | 
 | 	memset((void *)mem_virt_alloc, 0, mem_size+align); | 
 | 	*pphys_addr = mem_dma_handle; | 
 | 	phys_align = (*pphys_addr + align_offset) & ~align_offset; | 
 | 	*virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr; | 
 | 	*pphys_addr_hi = upper_32_bits(phys_align); | 
 | 	*pphys_addr_lo = lower_32_bits(phys_align); | 
 | 	return 0; | 
 | } | 
 | /** | 
 |   * pm8001_find_ha_by_dev - from domain device which come from sas layer to | 
 |   * find out our hba struct. | 
 |   * @dev: the domain device which from sas layer. | 
 |   */ | 
 | static | 
 | struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev) | 
 | { | 
 | 	struct sas_ha_struct *sha = dev->port->ha; | 
 | 	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; | 
 | 	return pm8001_ha; | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_phy_control - this function should be registered to | 
 |   * sas_domain_function_template to provide libsas used, note: this is just | 
 |   * control the HBA phy rather than other expander phy if you want control | 
 |   * other phy, you should use SMP command. | 
 |   * @sas_phy: which phy in HBA phys. | 
 |   * @func: the operation. | 
 |   * @funcdata: always NULL. | 
 |   */ | 
 | int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func, | 
 | 	void *funcdata) | 
 | { | 
 | 	int rc = 0, phy_id = sas_phy->id; | 
 | 	struct pm8001_hba_info *pm8001_ha = NULL; | 
 | 	struct sas_phy_linkrates *rates; | 
 | 	DECLARE_COMPLETION_ONSTACK(completion); | 
 | 	pm8001_ha = sas_phy->ha->lldd_ha; | 
 | 	pm8001_ha->phy[phy_id].enable_completion = &completion; | 
 | 	switch (func) { | 
 | 	case PHY_FUNC_SET_LINK_RATE: | 
 | 		rates = funcdata; | 
 | 		if (rates->minimum_linkrate) { | 
 | 			pm8001_ha->phy[phy_id].minimum_linkrate = | 
 | 				rates->minimum_linkrate; | 
 | 		} | 
 | 		if (rates->maximum_linkrate) { | 
 | 			pm8001_ha->phy[phy_id].maximum_linkrate = | 
 | 				rates->maximum_linkrate; | 
 | 		} | 
 | 		if (pm8001_ha->phy[phy_id].phy_state == 0) { | 
 | 			PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); | 
 | 			wait_for_completion(&completion); | 
 | 		} | 
 | 		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, | 
 | 					      PHY_LINK_RESET); | 
 | 		break; | 
 | 	case PHY_FUNC_HARD_RESET: | 
 | 		if (pm8001_ha->phy[phy_id].phy_state == 0) { | 
 | 			PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); | 
 | 			wait_for_completion(&completion); | 
 | 		} | 
 | 		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, | 
 | 					      PHY_HARD_RESET); | 
 | 		break; | 
 | 	case PHY_FUNC_LINK_RESET: | 
 | 		if (pm8001_ha->phy[phy_id].phy_state == 0) { | 
 | 			PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); | 
 | 			wait_for_completion(&completion); | 
 | 		} | 
 | 		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, | 
 | 					      PHY_LINK_RESET); | 
 | 		break; | 
 | 	case PHY_FUNC_RELEASE_SPINUP_HOLD: | 
 | 		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, | 
 | 					      PHY_LINK_RESET); | 
 | 		break; | 
 | 	case PHY_FUNC_DISABLE: | 
 | 		PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id); | 
 | 		break; | 
 | 	default: | 
 | 		rc = -ENOSYS; | 
 | 	} | 
 | 	msleep(300); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_scan_start - we should enable all HBA phys by sending the phy_start | 
 |   * command to HBA. | 
 |   * @shost: the scsi host data. | 
 |   */ | 
 | void pm8001_scan_start(struct Scsi_Host *shost) | 
 | { | 
 | 	int i; | 
 | 	struct pm8001_hba_info *pm8001_ha; | 
 | 	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); | 
 | 	pm8001_ha = sha->lldd_ha; | 
 | 	PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha); | 
 | 	for (i = 0; i < pm8001_ha->chip->n_phy; ++i) | 
 | 		PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i); | 
 | } | 
 |  | 
 | int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time) | 
 | { | 
 | 	/* give the phy enabling interrupt event time to come in (1s | 
 | 	* is empirically about all it takes) */ | 
 | 	if (time < HZ) | 
 | 		return 0; | 
 | 	/* Wait for discovery to finish */ | 
 | 	scsi_flush_work(shost); | 
 | 	return 1; | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task | 
 |   * @pm8001_ha: our hba card information | 
 |   * @ccb: the ccb which attached to smp task | 
 |   */ | 
 | static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha, | 
 | 	struct pm8001_ccb_info *ccb) | 
 | { | 
 | 	return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb); | 
 | } | 
 |  | 
 | u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag) | 
 | { | 
 | 	struct ata_queued_cmd *qc = task->uldd_task; | 
 | 	if (qc) { | 
 | 		if (qc->tf.command == ATA_CMD_FPDMA_WRITE || | 
 | 			qc->tf.command == ATA_CMD_FPDMA_READ) { | 
 | 			*tag = qc->tag; | 
 | 			return 1; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task | 
 |   * @pm8001_ha: our hba card information | 
 |   * @ccb: the ccb which attached to sata task | 
 |   */ | 
 | static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha, | 
 | 	struct pm8001_ccb_info *ccb) | 
 | { | 
 | 	return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb); | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data | 
 |   * @pm8001_ha: our hba card information | 
 |   * @ccb: the ccb which attached to TM | 
 |   * @tmf: the task management IU | 
 |   */ | 
 | static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha, | 
 | 	struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf) | 
 | { | 
 | 	return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf); | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task | 
 |   * @pm8001_ha: our hba card information | 
 |   * @ccb: the ccb which attached to ssp task | 
 |   */ | 
 | static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha, | 
 | 	struct pm8001_ccb_info *ccb) | 
 | { | 
 | 	return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb); | 
 | } | 
 |  | 
 |  /* Find the local port id that's attached to this device */ | 
 | static int sas_find_local_port_id(struct domain_device *dev) | 
 | { | 
 | 	struct domain_device *pdev = dev->parent; | 
 |  | 
 | 	/* Directly attached device */ | 
 | 	if (!pdev) | 
 | 		return dev->port->id; | 
 | 	while (pdev) { | 
 | 		struct domain_device *pdev_p = pdev->parent; | 
 | 		if (!pdev_p) | 
 | 			return pdev->port->id; | 
 | 		pdev = pdev->parent; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware. | 
 |   * @task: the task to be execute. | 
 |   * @num: if can_queue great than 1, the task can be queued up. for SMP task, | 
 |   * we always execute one one time. | 
 |   * @gfp_flags: gfp_flags. | 
 |   * @is_tmf: if it is task management task. | 
 |   * @tmf: the task management IU | 
 |   */ | 
 | #define DEV_IS_GONE(pm8001_dev)	\ | 
 | 	((!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE))) | 
 | static int pm8001_task_exec(struct sas_task *task, const int num, | 
 | 	gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf) | 
 | { | 
 | 	struct domain_device *dev = task->dev; | 
 | 	struct pm8001_hba_info *pm8001_ha; | 
 | 	struct pm8001_device *pm8001_dev; | 
 | 	struct pm8001_port *port = NULL; | 
 | 	struct sas_task *t = task; | 
 | 	struct pm8001_ccb_info *ccb; | 
 | 	u32 tag = 0xdeadbeef, rc, n_elem = 0; | 
 | 	u32 n = num; | 
 | 	unsigned long flags = 0, flags_libsas = 0; | 
 |  | 
 | 	if (!dev->port) { | 
 | 		struct task_status_struct *tsm = &t->task_status; | 
 | 		tsm->resp = SAS_TASK_UNDELIVERED; | 
 | 		tsm->stat = SAS_PHY_DOWN; | 
 | 		if (dev->dev_type != SATA_DEV) | 
 | 			t->task_done(t); | 
 | 		return 0; | 
 | 	} | 
 | 	pm8001_ha = pm8001_find_ha_by_dev(task->dev); | 
 | 	PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n ")); | 
 | 	spin_lock_irqsave(&pm8001_ha->lock, flags); | 
 | 	do { | 
 | 		dev = t->dev; | 
 | 		pm8001_dev = dev->lldd_dev; | 
 | 		port = &pm8001_ha->port[sas_find_local_port_id(dev)]; | 
 | 		if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) { | 
 | 			if (sas_protocol_ata(t->task_proto)) { | 
 | 				struct task_status_struct *ts = &t->task_status; | 
 | 				ts->resp = SAS_TASK_UNDELIVERED; | 
 | 				ts->stat = SAS_PHY_DOWN; | 
 |  | 
 | 				spin_unlock_irqrestore(&pm8001_ha->lock, flags); | 
 | 				spin_unlock_irqrestore(dev->sata_dev.ap->lock, | 
 | 						flags_libsas); | 
 | 				t->task_done(t); | 
 | 				spin_lock_irqsave(dev->sata_dev.ap->lock, | 
 | 					flags_libsas); | 
 | 				spin_lock_irqsave(&pm8001_ha->lock, flags); | 
 | 				if (n > 1) | 
 | 					t = list_entry(t->list.next, | 
 | 							struct sas_task, list); | 
 | 				continue; | 
 | 			} else { | 
 | 				struct task_status_struct *ts = &t->task_status; | 
 | 				ts->resp = SAS_TASK_UNDELIVERED; | 
 | 				ts->stat = SAS_PHY_DOWN; | 
 | 				t->task_done(t); | 
 | 				if (n > 1) | 
 | 					t = list_entry(t->list.next, | 
 | 							struct sas_task, list); | 
 | 				continue; | 
 | 			} | 
 | 		} | 
 | 		rc = pm8001_tag_alloc(pm8001_ha, &tag); | 
 | 		if (rc) | 
 | 			goto err_out; | 
 | 		ccb = &pm8001_ha->ccb_info[tag]; | 
 |  | 
 | 		if (!sas_protocol_ata(t->task_proto)) { | 
 | 			if (t->num_scatter) { | 
 | 				n_elem = dma_map_sg(pm8001_ha->dev, | 
 | 					t->scatter, | 
 | 					t->num_scatter, | 
 | 					t->data_dir); | 
 | 				if (!n_elem) { | 
 | 					rc = -ENOMEM; | 
 | 					goto err_out_tag; | 
 | 				} | 
 | 			} | 
 | 		} else { | 
 | 			n_elem = t->num_scatter; | 
 | 		} | 
 |  | 
 | 		t->lldd_task = ccb; | 
 | 		ccb->n_elem = n_elem; | 
 | 		ccb->ccb_tag = tag; | 
 | 		ccb->task = t; | 
 | 		switch (t->task_proto) { | 
 | 		case SAS_PROTOCOL_SMP: | 
 | 			rc = pm8001_task_prep_smp(pm8001_ha, ccb); | 
 | 			break; | 
 | 		case SAS_PROTOCOL_SSP: | 
 | 			if (is_tmf) | 
 | 				rc = pm8001_task_prep_ssp_tm(pm8001_ha, | 
 | 					ccb, tmf); | 
 | 			else | 
 | 				rc = pm8001_task_prep_ssp(pm8001_ha, ccb); | 
 | 			break; | 
 | 		case SAS_PROTOCOL_SATA: | 
 | 		case SAS_PROTOCOL_STP: | 
 | 		case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: | 
 | 			rc = pm8001_task_prep_ata(pm8001_ha, ccb); | 
 | 			break; | 
 | 		default: | 
 | 			dev_printk(KERN_ERR, pm8001_ha->dev, | 
 | 				"unknown sas_task proto: 0x%x\n", | 
 | 				t->task_proto); | 
 | 			rc = -EINVAL; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (rc) { | 
 | 			PM8001_IO_DBG(pm8001_ha, | 
 | 				pm8001_printk("rc is %x\n", rc)); | 
 | 			goto err_out_tag; | 
 | 		} | 
 | 		/* TODO: select normal or high priority */ | 
 | 		spin_lock(&t->task_state_lock); | 
 | 		t->task_state_flags |= SAS_TASK_AT_INITIATOR; | 
 | 		spin_unlock(&t->task_state_lock); | 
 | 		pm8001_dev->running_req++; | 
 | 		if (n > 1) | 
 | 			t = list_entry(t->list.next, struct sas_task, list); | 
 | 	} while (--n); | 
 | 	rc = 0; | 
 | 	goto out_done; | 
 |  | 
 | err_out_tag: | 
 | 	pm8001_tag_free(pm8001_ha, tag); | 
 | err_out: | 
 | 	dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc); | 
 | 	if (!sas_protocol_ata(t->task_proto)) | 
 | 		if (n_elem) | 
 | 			dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem, | 
 | 				t->data_dir); | 
 | out_done: | 
 | 	spin_unlock_irqrestore(&pm8001_ha->lock, flags); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_queue_command - register for upper layer used, all IO commands sent | 
 |   * to HBA are from this interface. | 
 |   * @task: the task to be execute. | 
 |   * @num: if can_queue great than 1, the task can be queued up. for SMP task, | 
 |   * we always execute one one time | 
 |   * @gfp_flags: gfp_flags | 
 |   */ | 
 | int pm8001_queue_command(struct sas_task *task, const int num, | 
 | 		gfp_t gfp_flags) | 
 | { | 
 | 	return pm8001_task_exec(task, num, gfp_flags, 0, NULL); | 
 | } | 
 |  | 
 | void pm8001_ccb_free(struct pm8001_hba_info *pm8001_ha, u32 ccb_idx) | 
 | { | 
 | 	pm8001_tag_clear(pm8001_ha, ccb_idx); | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb. | 
 |   * @pm8001_ha: our hba card information | 
 |   * @ccb: the ccb which attached to ssp task | 
 |   * @task: the task to be free. | 
 |   * @ccb_idx: ccb index. | 
 |   */ | 
 | void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha, | 
 | 	struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx) | 
 | { | 
 | 	if (!ccb->task) | 
 | 		return; | 
 | 	if (!sas_protocol_ata(task->task_proto)) | 
 | 		if (ccb->n_elem) | 
 | 			dma_unmap_sg(pm8001_ha->dev, task->scatter, | 
 | 				task->num_scatter, task->data_dir); | 
 |  | 
 | 	switch (task->task_proto) { | 
 | 	case SAS_PROTOCOL_SMP: | 
 | 		dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1, | 
 | 			PCI_DMA_FROMDEVICE); | 
 | 		dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1, | 
 | 			PCI_DMA_TODEVICE); | 
 | 		break; | 
 |  | 
 | 	case SAS_PROTOCOL_SATA: | 
 | 	case SAS_PROTOCOL_STP: | 
 | 	case SAS_PROTOCOL_SSP: | 
 | 	default: | 
 | 		/* do nothing */ | 
 | 		break; | 
 | 	} | 
 | 	task->lldd_task = NULL; | 
 | 	ccb->task = NULL; | 
 | 	ccb->ccb_tag = 0xFFFFFFFF; | 
 | 	pm8001_ccb_free(pm8001_ha, ccb_idx); | 
 | } | 
 |  | 
 |  /** | 
 |   * pm8001_alloc_dev - find a empty pm8001_device | 
 |   * @pm8001_ha: our hba card information | 
 |   */ | 
 | struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha) | 
 | { | 
 | 	u32 dev; | 
 | 	for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) { | 
 | 		if (pm8001_ha->devices[dev].dev_type == NO_DEVICE) { | 
 | 			pm8001_ha->devices[dev].id = dev; | 
 | 			return &pm8001_ha->devices[dev]; | 
 | 		} | 
 | 	} | 
 | 	if (dev == PM8001_MAX_DEVICES) { | 
 | 		PM8001_FAIL_DBG(pm8001_ha, | 
 | 			pm8001_printk("max support %d devices, ignore ..\n", | 
 | 			PM8001_MAX_DEVICES)); | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static void pm8001_free_dev(struct pm8001_device *pm8001_dev) | 
 | { | 
 | 	u32 id = pm8001_dev->id; | 
 | 	memset(pm8001_dev, 0, sizeof(*pm8001_dev)); | 
 | 	pm8001_dev->id = id; | 
 | 	pm8001_dev->dev_type = NO_DEVICE; | 
 | 	pm8001_dev->device_id = PM8001_MAX_DEVICES; | 
 | 	pm8001_dev->sas_device = NULL; | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_dev_found_notify - libsas notify a device is found. | 
 |   * @dev: the device structure which sas layer used. | 
 |   * | 
 |   * when libsas find a sas domain device, it should tell the LLDD that | 
 |   * device is found, and then LLDD register this device to HBA firmware | 
 |   * by the command "OPC_INB_REG_DEV", after that the HBA will assign a | 
 |   * device ID(according to device's sas address) and returned it to LLDD. From | 
 |   * now on, we communicate with HBA FW with the device ID which HBA assigned | 
 |   * rather than sas address. it is the necessary step for our HBA but it is | 
 |   * the optional for other HBA driver. | 
 |   */ | 
 | static int pm8001_dev_found_notify(struct domain_device *dev) | 
 | { | 
 | 	unsigned long flags = 0; | 
 | 	int res = 0; | 
 | 	struct pm8001_hba_info *pm8001_ha = NULL; | 
 | 	struct domain_device *parent_dev = dev->parent; | 
 | 	struct pm8001_device *pm8001_device; | 
 | 	DECLARE_COMPLETION_ONSTACK(completion); | 
 | 	u32 flag = 0; | 
 | 	pm8001_ha = pm8001_find_ha_by_dev(dev); | 
 | 	spin_lock_irqsave(&pm8001_ha->lock, flags); | 
 |  | 
 | 	pm8001_device = pm8001_alloc_dev(pm8001_ha); | 
 | 	if (!pm8001_device) { | 
 | 		res = -1; | 
 | 		goto found_out; | 
 | 	} | 
 | 	pm8001_device->sas_device = dev; | 
 | 	dev->lldd_dev = pm8001_device; | 
 | 	pm8001_device->dev_type = dev->dev_type; | 
 | 	pm8001_device->dcompletion = &completion; | 
 | 	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) { | 
 | 		int phy_id; | 
 | 		struct ex_phy *phy; | 
 | 		for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys; | 
 | 		phy_id++) { | 
 | 			phy = &parent_dev->ex_dev.ex_phy[phy_id]; | 
 | 			if (SAS_ADDR(phy->attached_sas_addr) | 
 | 				== SAS_ADDR(dev->sas_addr)) { | 
 | 				pm8001_device->attached_phy = phy_id; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		if (phy_id == parent_dev->ex_dev.num_phys) { | 
 | 			PM8001_FAIL_DBG(pm8001_ha, | 
 | 			pm8001_printk("Error: no attached dev:%016llx" | 
 | 			" at ex:%016llx.\n", SAS_ADDR(dev->sas_addr), | 
 | 				SAS_ADDR(parent_dev->sas_addr))); | 
 | 			res = -1; | 
 | 		} | 
 | 	} else { | 
 | 		if (dev->dev_type == SATA_DEV) { | 
 | 			pm8001_device->attached_phy = | 
 | 				dev->rphy->identify.phy_identifier; | 
 | 				flag = 1; /* directly sata*/ | 
 | 		} | 
 | 	} /*register this device to HBA*/ | 
 | 	PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n")); | 
 | 	PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag); | 
 | 	spin_unlock_irqrestore(&pm8001_ha->lock, flags); | 
 | 	wait_for_completion(&completion); | 
 | 	if (dev->dev_type == SAS_END_DEV) | 
 | 		msleep(50); | 
 | 	pm8001_ha->flags |= PM8001F_RUN_TIME ; | 
 | 	return 0; | 
 | found_out: | 
 | 	spin_unlock_irqrestore(&pm8001_ha->lock, flags); | 
 | 	return res; | 
 | } | 
 |  | 
 | int pm8001_dev_found(struct domain_device *dev) | 
 | { | 
 | 	return pm8001_dev_found_notify(dev); | 
 | } | 
 |  | 
 | static void pm8001_task_done(struct sas_task *task) | 
 | { | 
 | 	if (!del_timer(&task->timer)) | 
 | 		return; | 
 | 	complete(&task->completion); | 
 | } | 
 |  | 
 | static void pm8001_tmf_timedout(unsigned long data) | 
 | { | 
 | 	struct sas_task *task = (struct sas_task *)data; | 
 |  | 
 | 	task->task_state_flags |= SAS_TASK_STATE_ABORTED; | 
 | 	complete(&task->completion); | 
 | } | 
 |  | 
 | #define PM8001_TASK_TIMEOUT 20 | 
 | /** | 
 |   * pm8001_exec_internal_tmf_task - execute some task management commands. | 
 |   * @dev: the wanted device. | 
 |   * @tmf: which task management wanted to be take. | 
 |   * @para_len: para_len. | 
 |   * @parameter: ssp task parameter. | 
 |   * | 
 |   * when errors or exception happened, we may want to do something, for example | 
 |   * abort the issued task which result in this execption, it is done by calling | 
 |   * this function, note it is also with the task execute interface. | 
 |   */ | 
 | static int pm8001_exec_internal_tmf_task(struct domain_device *dev, | 
 | 	void *parameter, u32 para_len, struct pm8001_tmf_task *tmf) | 
 | { | 
 | 	int res, retry; | 
 | 	struct sas_task *task = NULL; | 
 | 	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); | 
 |  | 
 | 	for (retry = 0; retry < 3; retry++) { | 
 | 		task = sas_alloc_task(GFP_KERNEL); | 
 | 		if (!task) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		task->dev = dev; | 
 | 		task->task_proto = dev->tproto; | 
 | 		memcpy(&task->ssp_task, parameter, para_len); | 
 | 		task->task_done = pm8001_task_done; | 
 | 		task->timer.data = (unsigned long)task; | 
 | 		task->timer.function = pm8001_tmf_timedout; | 
 | 		task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ; | 
 | 		add_timer(&task->timer); | 
 |  | 
 | 		res = pm8001_task_exec(task, 1, GFP_KERNEL, 1, tmf); | 
 |  | 
 | 		if (res) { | 
 | 			del_timer(&task->timer); | 
 | 			PM8001_FAIL_DBG(pm8001_ha, | 
 | 				pm8001_printk("Executing internal task " | 
 | 				"failed\n")); | 
 | 			goto ex_err; | 
 | 		} | 
 | 		wait_for_completion(&task->completion); | 
 | 		res = -TMF_RESP_FUNC_FAILED; | 
 | 		/* Even TMF timed out, return direct. */ | 
 | 		if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { | 
 | 			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { | 
 | 				PM8001_FAIL_DBG(pm8001_ha, | 
 | 					pm8001_printk("TMF task[%x]timeout.\n", | 
 | 					tmf->tmf)); | 
 | 				goto ex_err; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (task->task_status.resp == SAS_TASK_COMPLETE && | 
 | 			task->task_status.stat == SAM_STAT_GOOD) { | 
 | 			res = TMF_RESP_FUNC_COMPLETE; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (task->task_status.resp == SAS_TASK_COMPLETE && | 
 | 		task->task_status.stat == SAS_DATA_UNDERRUN) { | 
 | 			/* no error, but return the number of bytes of | 
 | 			* underrun */ | 
 | 			res = task->task_status.residual; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (task->task_status.resp == SAS_TASK_COMPLETE && | 
 | 			task->task_status.stat == SAS_DATA_OVERRUN) { | 
 | 			PM8001_FAIL_DBG(pm8001_ha, | 
 | 				pm8001_printk("Blocked task error.\n")); | 
 | 			res = -EMSGSIZE; | 
 | 			break; | 
 | 		} else { | 
 | 			PM8001_EH_DBG(pm8001_ha, | 
 | 				pm8001_printk(" Task to dev %016llx response:" | 
 | 				"0x%x status 0x%x\n", | 
 | 				SAS_ADDR(dev->sas_addr), | 
 | 				task->task_status.resp, | 
 | 				task->task_status.stat)); | 
 | 			sas_free_task(task); | 
 | 			task = NULL; | 
 | 		} | 
 | 	} | 
 | ex_err: | 
 | 	BUG_ON(retry == 3 && task != NULL); | 
 | 	sas_free_task(task); | 
 | 	return res; | 
 | } | 
 |  | 
 | static int | 
 | pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha, | 
 | 	struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag, | 
 | 	u32 task_tag) | 
 | { | 
 | 	int res, retry; | 
 | 	u32 ccb_tag; | 
 | 	struct pm8001_ccb_info *ccb; | 
 | 	struct sas_task *task = NULL; | 
 |  | 
 | 	for (retry = 0; retry < 3; retry++) { | 
 | 		task = sas_alloc_task(GFP_KERNEL); | 
 | 		if (!task) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		task->dev = dev; | 
 | 		task->task_proto = dev->tproto; | 
 | 		task->task_done = pm8001_task_done; | 
 | 		task->timer.data = (unsigned long)task; | 
 | 		task->timer.function = pm8001_tmf_timedout; | 
 | 		task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ; | 
 | 		add_timer(&task->timer); | 
 |  | 
 | 		res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); | 
 | 		if (res) | 
 | 			return res; | 
 | 		ccb = &pm8001_ha->ccb_info[ccb_tag]; | 
 | 		ccb->device = pm8001_dev; | 
 | 		ccb->ccb_tag = ccb_tag; | 
 | 		ccb->task = task; | 
 |  | 
 | 		res = PM8001_CHIP_DISP->task_abort(pm8001_ha, | 
 | 			pm8001_dev, flag, task_tag, ccb_tag); | 
 |  | 
 | 		if (res) { | 
 | 			del_timer(&task->timer); | 
 | 			PM8001_FAIL_DBG(pm8001_ha, | 
 | 				pm8001_printk("Executing internal task " | 
 | 				"failed\n")); | 
 | 			goto ex_err; | 
 | 		} | 
 | 		wait_for_completion(&task->completion); | 
 | 		res = TMF_RESP_FUNC_FAILED; | 
 | 		/* Even TMF timed out, return direct. */ | 
 | 		if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { | 
 | 			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { | 
 | 				PM8001_FAIL_DBG(pm8001_ha, | 
 | 					pm8001_printk("TMF task timeout.\n")); | 
 | 				goto ex_err; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (task->task_status.resp == SAS_TASK_COMPLETE && | 
 | 			task->task_status.stat == SAM_STAT_GOOD) { | 
 | 			res = TMF_RESP_FUNC_COMPLETE; | 
 | 			break; | 
 |  | 
 | 		} else { | 
 | 			PM8001_EH_DBG(pm8001_ha, | 
 | 				pm8001_printk(" Task to dev %016llx response: " | 
 | 					"0x%x status 0x%x\n", | 
 | 				SAS_ADDR(dev->sas_addr), | 
 | 				task->task_status.resp, | 
 | 				task->task_status.stat)); | 
 | 			sas_free_task(task); | 
 | 			task = NULL; | 
 | 		} | 
 | 	} | 
 | ex_err: | 
 | 	BUG_ON(retry == 3 && task != NULL); | 
 | 	sas_free_task(task); | 
 | 	return res; | 
 | } | 
 |  | 
 | /** | 
 |   * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify" | 
 |   * @dev: the device structure which sas layer used. | 
 |   */ | 
 | static void pm8001_dev_gone_notify(struct domain_device *dev) | 
 | { | 
 | 	unsigned long flags = 0; | 
 | 	u32 tag; | 
 | 	struct pm8001_hba_info *pm8001_ha; | 
 | 	struct pm8001_device *pm8001_dev = dev->lldd_dev; | 
 |  | 
 | 	pm8001_ha = pm8001_find_ha_by_dev(dev); | 
 | 	spin_lock_irqsave(&pm8001_ha->lock, flags); | 
 | 	pm8001_tag_alloc(pm8001_ha, &tag); | 
 | 	if (pm8001_dev) { | 
 | 		u32 device_id = pm8001_dev->device_id; | 
 |  | 
 | 		PM8001_DISC_DBG(pm8001_ha, | 
 | 			pm8001_printk("found dev[%d:%x] is gone.\n", | 
 | 			pm8001_dev->device_id, pm8001_dev->dev_type)); | 
 | 		if (pm8001_dev->running_req) { | 
 | 			spin_unlock_irqrestore(&pm8001_ha->lock, flags); | 
 | 			pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , | 
 | 				dev, 1, 0); | 
 | 			spin_lock_irqsave(&pm8001_ha->lock, flags); | 
 | 		} | 
 | 		PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id); | 
 | 		pm8001_free_dev(pm8001_dev); | 
 | 	} else { | 
 | 		PM8001_DISC_DBG(pm8001_ha, | 
 | 			pm8001_printk("Found dev has gone.\n")); | 
 | 	} | 
 | 	dev->lldd_dev = NULL; | 
 | 	spin_unlock_irqrestore(&pm8001_ha->lock, flags); | 
 | } | 
 |  | 
 | void pm8001_dev_gone(struct domain_device *dev) | 
 | { | 
 | 	pm8001_dev_gone_notify(dev); | 
 | } | 
 |  | 
 | static int pm8001_issue_ssp_tmf(struct domain_device *dev, | 
 | 	u8 *lun, struct pm8001_tmf_task *tmf) | 
 | { | 
 | 	struct sas_ssp_task ssp_task; | 
 | 	if (!(dev->tproto & SAS_PROTOCOL_SSP)) | 
 | 		return TMF_RESP_FUNC_ESUPP; | 
 |  | 
 | 	strncpy((u8 *)&ssp_task.LUN, lun, 8); | 
 | 	return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task), | 
 | 		tmf); | 
 | } | 
 |  | 
 | /** | 
 |   * Standard mandates link reset for ATA  (type 0) and hard reset for | 
 |   * SSP (type 1) , only for RECOVERY | 
 |   */ | 
 | int pm8001_I_T_nexus_reset(struct domain_device *dev) | 
 | { | 
 | 	int rc = TMF_RESP_FUNC_FAILED; | 
 | 	struct pm8001_device *pm8001_dev; | 
 | 	struct pm8001_hba_info *pm8001_ha; | 
 | 	struct sas_phy *phy; | 
 | 	if (!dev || !dev->lldd_dev) | 
 | 		return -1; | 
 |  | 
 | 	pm8001_dev = dev->lldd_dev; | 
 | 	pm8001_ha = pm8001_find_ha_by_dev(dev); | 
 | 	phy = sas_find_local_phy(dev); | 
 |  | 
 | 	if (dev_is_sata(dev)) { | 
 | 		DECLARE_COMPLETION_ONSTACK(completion_setstate); | 
 | 		if (scsi_is_sas_phy_local(phy)) | 
 | 			return 0; | 
 | 		rc = sas_phy_reset(phy, 1); | 
 | 		msleep(2000); | 
 | 		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , | 
 | 			dev, 1, 0); | 
 | 		pm8001_dev->setds_completion = &completion_setstate; | 
 | 		rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, | 
 | 			pm8001_dev, 0x01); | 
 | 		wait_for_completion(&completion_setstate); | 
 | 	} else{ | 
 | 	rc = sas_phy_reset(phy, 1); | 
 | 	msleep(2000); | 
 | 	} | 
 | 	PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n", | 
 | 		pm8001_dev->device_id, rc)); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /* mandatory SAM-3, the task reset the specified LUN*/ | 
 | int pm8001_lu_reset(struct domain_device *dev, u8 *lun) | 
 | { | 
 | 	int rc = TMF_RESP_FUNC_FAILED; | 
 | 	struct pm8001_tmf_task tmf_task; | 
 | 	struct pm8001_device *pm8001_dev = dev->lldd_dev; | 
 | 	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); | 
 | 	if (dev_is_sata(dev)) { | 
 | 		struct sas_phy *phy = sas_find_local_phy(dev); | 
 | 		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , | 
 | 			dev, 1, 0); | 
 | 		rc = sas_phy_reset(phy, 1); | 
 | 		rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, | 
 | 			pm8001_dev, 0x01); | 
 | 		msleep(2000); | 
 | 	} else { | 
 | 		tmf_task.tmf = TMF_LU_RESET; | 
 | 		rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task); | 
 | 	} | 
 | 	/* If failed, fall-through I_T_Nexus reset */ | 
 | 	PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n", | 
 | 		pm8001_dev->device_id, rc)); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /* optional SAM-3 */ | 
 | int pm8001_query_task(struct sas_task *task) | 
 | { | 
 | 	u32 tag = 0xdeadbeef; | 
 | 	int i = 0; | 
 | 	struct scsi_lun lun; | 
 | 	struct pm8001_tmf_task tmf_task; | 
 | 	int rc = TMF_RESP_FUNC_FAILED; | 
 | 	if (unlikely(!task || !task->lldd_task || !task->dev)) | 
 | 		return rc; | 
 |  | 
 | 	if (task->task_proto & SAS_PROTOCOL_SSP) { | 
 | 		struct scsi_cmnd *cmnd = task->uldd_task; | 
 | 		struct domain_device *dev = task->dev; | 
 | 		struct pm8001_hba_info *pm8001_ha = | 
 | 			pm8001_find_ha_by_dev(dev); | 
 |  | 
 | 		int_to_scsilun(cmnd->device->lun, &lun); | 
 | 		rc = pm8001_find_tag(task, &tag); | 
 | 		if (rc == 0) { | 
 | 			rc = TMF_RESP_FUNC_FAILED; | 
 | 			return rc; | 
 | 		} | 
 | 		PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:[")); | 
 | 		for (i = 0; i < 16; i++) | 
 | 			printk(KERN_INFO "%02x ", cmnd->cmnd[i]); | 
 | 		printk(KERN_INFO "]\n"); | 
 | 		tmf_task.tmf = 	TMF_QUERY_TASK; | 
 | 		tmf_task.tag_of_task_to_be_managed = tag; | 
 |  | 
 | 		rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task); | 
 | 		switch (rc) { | 
 | 		/* The task is still in Lun, release it then */ | 
 | 		case TMF_RESP_FUNC_SUCC: | 
 | 			PM8001_EH_DBG(pm8001_ha, | 
 | 				pm8001_printk("The task is still in Lun\n")); | 
 | 			break; | 
 | 		/* The task is not in Lun or failed, reset the phy */ | 
 | 		case TMF_RESP_FUNC_FAILED: | 
 | 		case TMF_RESP_FUNC_COMPLETE: | 
 | 			PM8001_EH_DBG(pm8001_ha, | 
 | 			pm8001_printk("The task is not in Lun or failed," | 
 | 			" reset the phy\n")); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	pm8001_printk(":rc= %d\n", rc); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /*  mandatory SAM-3, still need free task/ccb info, abord the specified task */ | 
 | int pm8001_abort_task(struct sas_task *task) | 
 | { | 
 | 	unsigned long flags; | 
 | 	u32 tag = 0xdeadbeef; | 
 | 	u32 device_id; | 
 | 	struct domain_device *dev ; | 
 | 	struct pm8001_hba_info *pm8001_ha = NULL; | 
 | 	struct pm8001_ccb_info *ccb; | 
 | 	struct scsi_lun lun; | 
 | 	struct pm8001_device *pm8001_dev; | 
 | 	struct pm8001_tmf_task tmf_task; | 
 | 	int rc = TMF_RESP_FUNC_FAILED; | 
 | 	if (unlikely(!task || !task->lldd_task || !task->dev)) | 
 | 		return rc; | 
 | 	spin_lock_irqsave(&task->task_state_lock, flags); | 
 | 	if (task->task_state_flags & SAS_TASK_STATE_DONE) { | 
 | 		spin_unlock_irqrestore(&task->task_state_lock, flags); | 
 | 		rc = TMF_RESP_FUNC_COMPLETE; | 
 | 		goto out; | 
 | 	} | 
 | 	spin_unlock_irqrestore(&task->task_state_lock, flags); | 
 | 	if (task->task_proto & SAS_PROTOCOL_SSP) { | 
 | 		struct scsi_cmnd *cmnd = task->uldd_task; | 
 | 		dev = task->dev; | 
 | 		ccb = task->lldd_task; | 
 | 		pm8001_dev = dev->lldd_dev; | 
 | 		pm8001_ha = pm8001_find_ha_by_dev(dev); | 
 | 		int_to_scsilun(cmnd->device->lun, &lun); | 
 | 		rc = pm8001_find_tag(task, &tag); | 
 | 		if (rc == 0) { | 
 | 			printk(KERN_INFO "No such tag in %s\n", __func__); | 
 | 			rc = TMF_RESP_FUNC_FAILED; | 
 | 			return rc; | 
 | 		} | 
 | 		device_id = pm8001_dev->device_id; | 
 | 		PM8001_EH_DBG(pm8001_ha, | 
 | 			pm8001_printk("abort io to deviceid= %d\n", device_id)); | 
 | 		tmf_task.tmf = TMF_ABORT_TASK; | 
 | 		tmf_task.tag_of_task_to_be_managed = tag; | 
 | 		rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task); | 
 | 		pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev, | 
 | 			pm8001_dev->sas_device, 0, tag); | 
 | 	} else if (task->task_proto & SAS_PROTOCOL_SATA || | 
 | 		task->task_proto & SAS_PROTOCOL_STP) { | 
 | 		dev = task->dev; | 
 | 		pm8001_dev = dev->lldd_dev; | 
 | 		pm8001_ha = pm8001_find_ha_by_dev(dev); | 
 | 		rc = pm8001_find_tag(task, &tag); | 
 | 		if (rc == 0) { | 
 | 			printk(KERN_INFO "No such tag in %s\n", __func__); | 
 | 			rc = TMF_RESP_FUNC_FAILED; | 
 | 			return rc; | 
 | 		} | 
 | 		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev, | 
 | 			pm8001_dev->sas_device, 0, tag); | 
 | 	} else if (task->task_proto & SAS_PROTOCOL_SMP) { | 
 | 		/* SMP */ | 
 | 		dev = task->dev; | 
 | 		pm8001_dev = dev->lldd_dev; | 
 | 		pm8001_ha = pm8001_find_ha_by_dev(dev); | 
 | 		rc = pm8001_find_tag(task, &tag); | 
 | 		if (rc == 0) { | 
 | 			printk(KERN_INFO "No such tag in %s\n", __func__); | 
 | 			rc = TMF_RESP_FUNC_FAILED; | 
 | 			return rc; | 
 | 		} | 
 | 		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev, | 
 | 			pm8001_dev->sas_device, 0, tag); | 
 |  | 
 | 	} | 
 | out: | 
 | 	if (rc != TMF_RESP_FUNC_COMPLETE) | 
 | 		pm8001_printk("rc= %d\n", rc); | 
 | 	return rc; | 
 | } | 
 |  | 
 | int pm8001_abort_task_set(struct domain_device *dev, u8 *lun) | 
 | { | 
 | 	int rc = TMF_RESP_FUNC_FAILED; | 
 | 	struct pm8001_tmf_task tmf_task; | 
 |  | 
 | 	tmf_task.tmf = TMF_ABORT_TASK_SET; | 
 | 	rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task); | 
 | 	return rc; | 
 | } | 
 |  | 
 | int pm8001_clear_aca(struct domain_device *dev, u8 *lun) | 
 | { | 
 | 	int rc = TMF_RESP_FUNC_FAILED; | 
 | 	struct pm8001_tmf_task tmf_task; | 
 |  | 
 | 	tmf_task.tmf = TMF_CLEAR_ACA; | 
 | 	rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | int pm8001_clear_task_set(struct domain_device *dev, u8 *lun) | 
 | { | 
 | 	int rc = TMF_RESP_FUNC_FAILED; | 
 | 	struct pm8001_tmf_task tmf_task; | 
 | 	struct pm8001_device *pm8001_dev = dev->lldd_dev; | 
 | 	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); | 
 |  | 
 | 	PM8001_EH_DBG(pm8001_ha, | 
 | 		pm8001_printk("I_T_L_Q clear task set[%x]\n", | 
 | 		pm8001_dev->device_id)); | 
 | 	tmf_task.tmf = TMF_CLEAR_TASK_SET; | 
 | 	rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task); | 
 | 	return rc; | 
 | } | 
 |  |