|  | /* | 
|  | * Renesas USB driver | 
|  | * | 
|  | * Copyright (C) 2011 Renesas Solutions Corp. | 
|  | * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA | 
|  | * | 
|  | */ | 
|  | #include <linux/delay.h> | 
|  | #include <linux/slab.h> | 
|  | #include "./common.h" | 
|  | #include "./pipe.h" | 
|  |  | 
|  | /* | 
|  | *		macros | 
|  | */ | 
|  | #define usbhsp_addr_offset(p)	((usbhs_pipe_number(p) - 1) * 2) | 
|  |  | 
|  | #define usbhsp_flags_set(p, f)	((p)->flags |=  USBHS_PIPE_FLAGS_##f) | 
|  | #define usbhsp_flags_clr(p, f)	((p)->flags &= ~USBHS_PIPE_FLAGS_##f) | 
|  | #define usbhsp_flags_has(p, f)	((p)->flags &   USBHS_PIPE_FLAGS_##f) | 
|  | #define usbhsp_flags_init(p)	do {(p)->flags = 0; } while (0) | 
|  |  | 
|  | /* | 
|  | * for debug | 
|  | */ | 
|  | static char *usbhsp_pipe_name[] = { | 
|  | [USB_ENDPOINT_XFER_CONTROL]	= "DCP", | 
|  | [USB_ENDPOINT_XFER_BULK]	= "BULK", | 
|  | [USB_ENDPOINT_XFER_INT]		= "INT", | 
|  | [USB_ENDPOINT_XFER_ISOC]	= "ISO", | 
|  | }; | 
|  |  | 
|  | char *usbhs_pipe_name(struct usbhs_pipe *pipe) | 
|  | { | 
|  | return usbhsp_pipe_name[usbhs_pipe_type(pipe)]; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		DCPCTR/PIPEnCTR functions | 
|  | */ | 
|  | static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | int offset = usbhsp_addr_offset(pipe); | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | usbhs_bset(priv, DCPCTR, mask, val); | 
|  | else | 
|  | usbhs_bset(priv, PIPEnCTR + offset, mask, val); | 
|  | } | 
|  |  | 
|  | static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | int offset = usbhsp_addr_offset(pipe); | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | return usbhs_read(priv, DCPCTR); | 
|  | else | 
|  | return usbhs_read(priv, PIPEnCTR + offset); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		DCP/PIPE functions | 
|  | */ | 
|  | static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe, | 
|  | u16 dcp_reg, u16 pipe_reg, | 
|  | u16 mask, u16 val) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | usbhs_bset(priv, dcp_reg, mask, val); | 
|  | else | 
|  | usbhs_bset(priv, pipe_reg, mask, val); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		DCPCFG/PIPECFG functions | 
|  | */ | 
|  | static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | 
|  | { | 
|  | __usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		PIPEBUF | 
|  | */ | 
|  | static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | 
|  | { | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | return; | 
|  |  | 
|  | __usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		DCPMAXP/PIPEMAXP | 
|  | */ | 
|  | static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | 
|  | { | 
|  | __usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		pipe control functions | 
|  | */ | 
|  | static void usbhsp_pipe_select(struct usbhs_pipe *pipe) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  |  | 
|  | /* | 
|  | * On pipe, this is necessary before | 
|  | * accesses to below registers. | 
|  | * | 
|  | * PIPESEL	: usbhsp_pipe_select | 
|  | * PIPECFG	: usbhsp_pipe_cfg_xxx | 
|  | * PIPEBUF	: usbhsp_pipe_buf_xxx | 
|  | * PIPEMAXP	: usbhsp_pipe_maxp_xxx | 
|  | * PIPEPERI | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * if pipe is dcp, no pipe is selected. | 
|  | * it is no problem, because dcp have its register | 
|  | */ | 
|  | usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe)); | 
|  | } | 
|  |  | 
|  | static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | int timeout = 1024; | 
|  | u16 val; | 
|  |  | 
|  | /* | 
|  | * make sure.... | 
|  | * | 
|  | * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is | 
|  | * specified by the CURPIPE bits. | 
|  | * When changing the setting of this bit after changing | 
|  | * the PID bits for the selected pipe from BUF to NAK, | 
|  | * check that CSSTS = 0 and PBUSY = 0. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * CURPIPE bit = 0 | 
|  | * | 
|  | * see also | 
|  | *  "Operation" | 
|  | *  - "Pipe Control" | 
|  | *   - "Pipe Control Registers Switching Procedure" | 
|  | */ | 
|  | usbhs_write(priv, CFIFOSEL, 0); | 
|  | usbhs_pipe_disable(pipe); | 
|  |  | 
|  | do { | 
|  | val  = usbhsp_pipectrl_get(pipe); | 
|  | val &= CSSTS | PID_MASK; | 
|  | if (!val) | 
|  | return 0; | 
|  |  | 
|  | udelay(10); | 
|  |  | 
|  | } while (timeout--); | 
|  |  | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe) | 
|  | { | 
|  | u16 val; | 
|  |  | 
|  | val = usbhsp_pipectrl_get(pipe); | 
|  | if (val & BSTS) | 
|  | return 0; | 
|  |  | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		PID ctrl | 
|  | */ | 
|  | static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe) | 
|  | { | 
|  | u16 pid = usbhsp_pipectrl_get(pipe); | 
|  |  | 
|  | pid &= PID_MASK; | 
|  |  | 
|  | /* | 
|  | * see | 
|  | * "Pipe n Control Register" - "PID" | 
|  | */ | 
|  | switch (pid) { | 
|  | case PID_STALL11: | 
|  | usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10); | 
|  | /* fall-through */ | 
|  | case PID_STALL10: | 
|  | usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK); | 
|  | } | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_disable(struct usbhs_pipe *pipe) | 
|  | { | 
|  | int timeout = 1024; | 
|  | u16 val; | 
|  |  | 
|  | /* see "Pipe n Control Register" - "PID" */ | 
|  | __usbhsp_pid_try_nak_if_stall(pipe); | 
|  |  | 
|  | usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK); | 
|  |  | 
|  | do { | 
|  | val  = usbhsp_pipectrl_get(pipe); | 
|  | val &= PBUSY; | 
|  | if (!val) | 
|  | break; | 
|  |  | 
|  | udelay(10); | 
|  | } while (timeout--); | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_enable(struct usbhs_pipe *pipe) | 
|  | { | 
|  | /* see "Pipe n Control Register" - "PID" */ | 
|  | __usbhsp_pid_try_nak_if_stall(pipe); | 
|  |  | 
|  | usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF); | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_stall(struct usbhs_pipe *pipe) | 
|  | { | 
|  | u16 pid = usbhsp_pipectrl_get(pipe); | 
|  |  | 
|  | pid &= PID_MASK; | 
|  |  | 
|  | /* | 
|  | * see | 
|  | * "Pipe n Control Register" - "PID" | 
|  | */ | 
|  | switch (pid) { | 
|  | case PID_NAK: | 
|  | usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10); | 
|  | break; | 
|  | case PID_BUF: | 
|  | usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		pipe setup | 
|  | */ | 
|  | static int usbhsp_possible_double_buffer(struct usbhs_pipe *pipe) | 
|  | { | 
|  | /* | 
|  | * only ISO / BULK pipe can use double buffer | 
|  | */ | 
|  | if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) || | 
|  | usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, | 
|  | int is_host, | 
|  | int dir_in) | 
|  | { | 
|  | u16 type = 0; | 
|  | u16 bfre = 0; | 
|  | u16 dblb = 0; | 
|  | u16 cntmd = 0; | 
|  | u16 dir = 0; | 
|  | u16 epnum = 0; | 
|  | u16 shtnak = 0; | 
|  | u16 type_array[] = { | 
|  | [USB_ENDPOINT_XFER_BULK] = TYPE_BULK, | 
|  | [USB_ENDPOINT_XFER_INT]  = TYPE_INT, | 
|  | [USB_ENDPOINT_XFER_ISOC] = TYPE_ISO, | 
|  | }; | 
|  | int is_double = usbhsp_possible_double_buffer(pipe); | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * PIPECFG | 
|  | * | 
|  | * see | 
|  | *  - "Register Descriptions" - "PIPECFG" register | 
|  | *  - "Features"  - "Pipe configuration" | 
|  | *  - "Operation" - "Pipe Control" | 
|  | */ | 
|  |  | 
|  | /* TYPE */ | 
|  | type = type_array[usbhs_pipe_type(pipe)]; | 
|  |  | 
|  | /* BFRE */ | 
|  | if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || | 
|  | usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) | 
|  | bfre = 0; /* FIXME */ | 
|  |  | 
|  | /* DBLB */ | 
|  | if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || | 
|  | usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) | 
|  | dblb = (is_double) ? DBLB : 0; | 
|  |  | 
|  | /* CNTMD */ | 
|  | if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) | 
|  | cntmd = 0; /* FIXME */ | 
|  |  | 
|  | /* DIR */ | 
|  | if (dir_in) | 
|  | usbhsp_flags_set(pipe, IS_DIR_HOST); | 
|  |  | 
|  | if ((is_host  && !dir_in) || | 
|  | (!is_host && dir_in)) | 
|  | dir |= DIR_OUT; | 
|  |  | 
|  | if (!dir) | 
|  | usbhsp_flags_set(pipe, IS_DIR_IN); | 
|  |  | 
|  | /* SHTNAK */ | 
|  | if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) && | 
|  | !dir) | 
|  | shtnak = SHTNAK; | 
|  |  | 
|  | /* EPNUM */ | 
|  | epnum = 0; /* see usbhs_pipe_config_update() */ | 
|  |  | 
|  | return	type	| | 
|  | bfre	| | 
|  | dblb	| | 
|  | cntmd	| | 
|  | dir	| | 
|  | shtnak	| | 
|  | epnum; | 
|  | } | 
|  |  | 
|  | static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | int pipe_num = usbhs_pipe_number(pipe); | 
|  | int is_double = usbhsp_possible_double_buffer(pipe); | 
|  | u16 buff_size; | 
|  | u16 bufnmb; | 
|  | u16 bufnmb_cnt; | 
|  |  | 
|  | /* | 
|  | * PIPEBUF | 
|  | * | 
|  | * see | 
|  | *  - "Register Descriptions" - "PIPEBUF" register | 
|  | *  - "Features"  - "Pipe configuration" | 
|  | *  - "Operation" - "FIFO Buffer Memory" | 
|  | *  - "Operation" - "Pipe Control" | 
|  | * | 
|  | * ex) if pipe6 - pipe9 are USB_ENDPOINT_XFER_INT (SH7724) | 
|  | * | 
|  | * BUFNMB:	PIPE | 
|  | * 0:		pipe0 (DCP 256byte) | 
|  | * 1:		- | 
|  | * 2:		- | 
|  | * 3:		- | 
|  | * 4:		pipe6 (INT 64byte) | 
|  | * 5:		pipe7 (INT 64byte) | 
|  | * 6:		pipe8 (INT 64byte) | 
|  | * 7:		pipe9 (INT 64byte) | 
|  | * 8 - xx:	free (for BULK, ISOC) | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * FIXME | 
|  | * | 
|  | * it doesn't have good buffer allocator | 
|  | * | 
|  | * DCP : 256 byte | 
|  | * BULK: 512 byte | 
|  | * INT :  64 byte | 
|  | * ISOC: 512 byte | 
|  | */ | 
|  | if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_CONTROL)) | 
|  | buff_size = 256; | 
|  | else if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT)) | 
|  | buff_size = 64; | 
|  | else | 
|  | buff_size = 512; | 
|  |  | 
|  | /* change buff_size to register value */ | 
|  | bufnmb_cnt = (buff_size / 64) - 1; | 
|  |  | 
|  | /* BUFNMB has been reserved for INT pipe | 
|  | * see above */ | 
|  | if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT)) { | 
|  | bufnmb = pipe_num - 2; | 
|  | } else { | 
|  | bufnmb = info->bufnmb_last; | 
|  | info->bufnmb_last += bufnmb_cnt + 1; | 
|  |  | 
|  | /* | 
|  | * double buffer | 
|  | */ | 
|  | if (is_double) | 
|  | info->bufnmb_last += bufnmb_cnt + 1; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n", | 
|  | pipe_num, buff_size, bufnmb); | 
|  |  | 
|  | return	(0x1f & bufnmb_cnt)	<< 10 | | 
|  | (0xff & bufnmb)		<<  0; | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel, | 
|  | u16 epnum, u16 maxp) | 
|  | { | 
|  | if (devsel > 0xA) { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  |  | 
|  | dev_err(dev, "devsel error %d\n", devsel); | 
|  |  | 
|  | devsel = 0; | 
|  | } | 
|  |  | 
|  | usbhsp_pipe_barrier(pipe); | 
|  |  | 
|  | pipe->maxp = maxp; | 
|  |  | 
|  | usbhsp_pipe_select(pipe); | 
|  | usbhsp_pipe_maxp_set(pipe, 0xFFFF, | 
|  | (devsel << 12) | | 
|  | maxp); | 
|  |  | 
|  | if (!usbhs_pipe_is_dcp(pipe)) | 
|  | usbhsp_pipe_cfg_set(pipe,  0x000F, epnum); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		pipe control | 
|  | */ | 
|  | int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe) | 
|  | { | 
|  | /* | 
|  | * see | 
|  | *	usbhs_pipe_config_update() | 
|  | *	usbhs_dcp_malloc() | 
|  | */ | 
|  | return pipe->maxp; | 
|  | } | 
|  |  | 
|  | int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe) | 
|  | { | 
|  | return usbhsp_flags_has(pipe, IS_DIR_IN); | 
|  | } | 
|  |  | 
|  | int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe) | 
|  | { | 
|  | return usbhsp_flags_has(pipe, IS_DIR_HOST); | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int data) | 
|  | { | 
|  | u16 mask = (SQCLR | SQSET); | 
|  | u16 val = (data) ? SQSET : SQCLR; | 
|  |  | 
|  | usbhsp_pipectrl_set(pipe, mask, val); | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_clear(struct usbhs_pipe *pipe) | 
|  | { | 
|  | usbhsp_pipectrl_set(pipe, ACLRM, ACLRM); | 
|  | usbhsp_pipectrl_set(pipe, ACLRM, 0); | 
|  | } | 
|  |  | 
|  | static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type) | 
|  | { | 
|  | struct usbhs_pipe *pos, *pipe; | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * find target pipe | 
|  | */ | 
|  | pipe = NULL; | 
|  | usbhs_for_each_pipe_with_dcp(pos, priv, i) { | 
|  | if (!usbhs_pipe_type_is(pos, type)) | 
|  | continue; | 
|  | if (usbhsp_flags_has(pos, IS_USED)) | 
|  | continue; | 
|  |  | 
|  | pipe = pos; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!pipe) | 
|  | return NULL; | 
|  |  | 
|  | /* | 
|  | * initialize pipe flags | 
|  | */ | 
|  | usbhsp_flags_init(pipe); | 
|  | usbhsp_flags_set(pipe, IS_USED); | 
|  |  | 
|  | return pipe; | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_init(struct usbhs_priv *priv, | 
|  | int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map)) | 
|  | { | 
|  | struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | 
|  | struct usbhs_pipe *pipe; | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * FIXME | 
|  | * | 
|  | * driver needs good allocator. | 
|  | * | 
|  | * find first free buffer area (BULK, ISOC) | 
|  | * (DCP, INT area is fixed) | 
|  | * | 
|  | * buffer number 0 - 3 have been reserved for DCP | 
|  | * see | 
|  | *	usbhsp_to_bufnmb | 
|  | */ | 
|  | info->bufnmb_last = 4; | 
|  | usbhs_for_each_pipe_with_dcp(pipe, priv, i) { | 
|  | if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT)) | 
|  | info->bufnmb_last++; | 
|  |  | 
|  | usbhsp_flags_init(pipe); | 
|  | pipe->fifo = NULL; | 
|  | pipe->mod_private = NULL; | 
|  | INIT_LIST_HEAD(&pipe->list); | 
|  |  | 
|  | /* pipe force init */ | 
|  | usbhs_pipe_clear(pipe); | 
|  | } | 
|  |  | 
|  | info->dma_map_ctrl = dma_map_ctrl; | 
|  | } | 
|  |  | 
|  | struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv, | 
|  | int endpoint_type, | 
|  | int dir_in) | 
|  | { | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | struct usbhs_pipe *pipe; | 
|  | int is_host = usbhs_mod_is_host(priv); | 
|  | int ret; | 
|  | u16 pipecfg, pipebuf; | 
|  |  | 
|  | pipe = usbhsp_get_pipe(priv, endpoint_type); | 
|  | if (!pipe) { | 
|  | dev_err(dev, "can't get pipe (%s)\n", | 
|  | usbhsp_pipe_name[endpoint_type]); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&pipe->list); | 
|  |  | 
|  | usbhs_pipe_disable(pipe); | 
|  |  | 
|  | /* make sure pipe is not busy */ | 
|  | ret = usbhsp_pipe_barrier(pipe); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe)); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | pipecfg  = usbhsp_setup_pipecfg(pipe, is_host, dir_in); | 
|  | pipebuf  = usbhsp_setup_pipebuff(pipe); | 
|  |  | 
|  | usbhsp_pipe_select(pipe); | 
|  | usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg); | 
|  | usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf); | 
|  |  | 
|  | usbhs_pipe_sequence_data0(pipe); | 
|  |  | 
|  | dev_dbg(dev, "enable pipe %d : %s (%s)\n", | 
|  | usbhs_pipe_number(pipe), | 
|  | usbhs_pipe_name(pipe), | 
|  | usbhs_pipe_is_dir_in(pipe) ? "in" : "out"); | 
|  |  | 
|  | /* | 
|  | * epnum / maxp are still not set to this pipe. | 
|  | * call usbhs_pipe_config_update() after this function !! | 
|  | */ | 
|  |  | 
|  | return pipe; | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo) | 
|  | { | 
|  | if (pipe->fifo) | 
|  | pipe->fifo->pipe = NULL; | 
|  |  | 
|  | pipe->fifo = fifo; | 
|  |  | 
|  | if (fifo) | 
|  | fifo->pipe = pipe; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | *		dcp control | 
|  | */ | 
|  | struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv) | 
|  | { | 
|  | struct usbhs_pipe *pipe; | 
|  |  | 
|  | pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL); | 
|  | if (!pipe) | 
|  | return NULL; | 
|  |  | 
|  | INIT_LIST_HEAD(&pipe->list); | 
|  |  | 
|  | /* | 
|  | * call usbhs_pipe_config_update() after this function !! | 
|  | */ | 
|  |  | 
|  | return pipe; | 
|  | } | 
|  |  | 
|  | void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  |  | 
|  | WARN_ON(!usbhs_pipe_is_dcp(pipe)); | 
|  |  | 
|  | usbhs_pipe_enable(pipe); | 
|  |  | 
|  | if (!usbhs_mod_is_host(priv)) /* funconly */ | 
|  | usbhsp_pipectrl_set(pipe, CCPL, CCPL); | 
|  | } | 
|  |  | 
|  | void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out) | 
|  | { | 
|  | usbhsp_pipe_cfg_set(pipe, DIR_OUT, | 
|  | dir_out ? DIR_OUT : 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		pipe module function | 
|  | */ | 
|  | int usbhs_pipe_probe(struct usbhs_priv *priv) | 
|  | { | 
|  | struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | 
|  | struct usbhs_pipe *pipe; | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | u32 *pipe_type = usbhs_get_dparam(priv, pipe_type); | 
|  | int pipe_size = usbhs_get_dparam(priv, pipe_size); | 
|  | int i; | 
|  |  | 
|  | /* This driver expects 1st pipe is DCP */ | 
|  | if (pipe_type[0] != USB_ENDPOINT_XFER_CONTROL) { | 
|  | dev_err(dev, "1st PIPE is not DCP\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | info->pipe = kzalloc(sizeof(struct usbhs_pipe) * pipe_size, GFP_KERNEL); | 
|  | if (!info->pipe) { | 
|  | dev_err(dev, "Could not allocate pipe\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | info->size = pipe_size; | 
|  |  | 
|  | /* | 
|  | * init pipe | 
|  | */ | 
|  | usbhs_for_each_pipe_with_dcp(pipe, priv, i) { | 
|  | pipe->priv = priv; | 
|  |  | 
|  | usbhs_pipe_type(pipe) = | 
|  | pipe_type[i] & USB_ENDPOINT_XFERTYPE_MASK; | 
|  |  | 
|  | dev_dbg(dev, "pipe %x\t: %s\n", | 
|  | i, usbhsp_pipe_name[pipe_type[i]]); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_remove(struct usbhs_priv *priv) | 
|  | { | 
|  | struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | 
|  |  | 
|  | kfree(info->pipe); | 
|  | } |