)]}'
{
  "commit": "a04caaa347b2d096b3a8c667febbce3ff64de5d0",
  "tree": "f6bed6e4f0fdd810925693723721943da17d0b0f",
  "parents": [
    "2009fe63c80e1786495ebc96c32dddd1bf1e0485"
  ],
  "author": {
    "name": "Jin Hong",
    "email": "jinh@codeaurora.org",
    "time": "Wed May 23 10:28:27 2012 -0700"
  },
  "committer": {
    "name": "Sagar Dharia",
    "email": "sdharia@codeaurora.org",
    "time": "Thu May 31 18:50:29 2012 -0600"
  },
  "message": "msm: copper: enable i2c(BLSP11) on RUMI\n\ni2c is supported in RUMI on BLSP11. Device tree support is added\nfor the same. Corresponding GPIOs are initialized as well.\n\nChange-Id: I62765f0a839af86ed3e2b3f7a01bc541bb698745\nSigned-off-by: Jin Hong \u003cjinh@codeaurora.org\u003e\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "d6e23ad62add2468e8f2b39dab62ad9f1ff524ac",
      "old_mode": 33188,
      "old_path": "arch/arm/boot/dts/msmcopper-rumi.dts",
      "new_id": "5bfb22895aa8c7fa013ec3aa70f684485b96bd6f",
      "new_mode": 33188,
      "new_path": "arch/arm/boot/dts/msmcopper-rumi.dts"
    },
    {
      "type": "modify",
      "old_id": "0ea33c71e2b080f154e3a8859613f226c9e097c4",
      "old_mode": 33188,
      "old_path": "arch/arm/mach-msm/board-copper-gpiomux.c",
      "new_id": "caba698438cf7ee7813af81fd10568703634b5a6",
      "new_mode": 33188,
      "new_path": "arch/arm/mach-msm/board-copper-gpiomux.c"
    }
  ]
}