|  | /* | 
|  | * drivers/mmc/host/sdhci-spear.c | 
|  | * | 
|  | * Support of SDHCI platform devices for spear soc family | 
|  | * | 
|  | * Copyright (C) 2010 ST Microelectronics | 
|  | * Viresh Kumar<viresh.kumar@st.com> | 
|  | * | 
|  | * Inspired by sdhci-pltfm.c | 
|  | * | 
|  | * This file is licensed under the terms of the GNU General Public | 
|  | * License version 2. This program is licensed "as is" without any | 
|  | * warranty of any kind, whether express or implied. | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/highmem.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/mmc/host.h> | 
|  | #include <linux/mmc/sdhci-spear.h> | 
|  | #include <linux/io.h> | 
|  | #include "sdhci.h" | 
|  |  | 
|  | struct spear_sdhci { | 
|  | struct clk *clk; | 
|  | struct sdhci_plat_data *data; | 
|  | }; | 
|  |  | 
|  | /* sdhci ops */ | 
|  | static struct sdhci_ops sdhci_pltfm_ops = { | 
|  | /* Nothing to do for now. */ | 
|  | }; | 
|  |  | 
|  | /* gpio card detection interrupt handler */ | 
|  | static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id) | 
|  | { | 
|  | struct platform_device *pdev = dev_id; | 
|  | struct sdhci_host *host = platform_get_drvdata(pdev); | 
|  | struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev); | 
|  | unsigned long gpio_irq_type; | 
|  | int val; | 
|  |  | 
|  | val = gpio_get_value(sdhci->data->card_int_gpio); | 
|  |  | 
|  | /* val == 1 -> card removed, val == 0 -> card inserted */ | 
|  | /* if card removed - set irq for low level, else vice versa */ | 
|  | gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH; | 
|  | set_irq_type(irq, gpio_irq_type); | 
|  |  | 
|  | if (sdhci->data->card_power_gpio >= 0) { | 
|  | if (!sdhci->data->power_always_enb) { | 
|  | /* if card inserted, give power, otherwise remove it */ | 
|  | val = sdhci->data->power_active_high ? !val : val ; | 
|  | gpio_set_value(sdhci->data->card_power_gpio, val); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* inform sdhci driver about card insertion/removal */ | 
|  | tasklet_schedule(&host->card_tasklet); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int __devinit sdhci_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct sdhci_host *host; | 
|  | struct resource *iomem; | 
|  | struct spear_sdhci *sdhci; | 
|  | int ret; | 
|  |  | 
|  | BUG_ON(pdev == NULL); | 
|  |  | 
|  | iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!iomem) { | 
|  | ret = -ENOMEM; | 
|  | dev_dbg(&pdev->dev, "memory resource not defined\n"); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (!request_mem_region(iomem->start, resource_size(iomem), | 
|  | "spear-sdhci")) { | 
|  | ret = -EBUSY; | 
|  | dev_dbg(&pdev->dev, "cannot request region\n"); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | sdhci = kzalloc(sizeof(*sdhci), GFP_KERNEL); | 
|  | if (!sdhci) { | 
|  | ret = -ENOMEM; | 
|  | dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n"); | 
|  | goto err_kzalloc; | 
|  | } | 
|  |  | 
|  | /* clk enable */ | 
|  | sdhci->clk = clk_get(&pdev->dev, NULL); | 
|  | if (IS_ERR(sdhci->clk)) { | 
|  | ret = PTR_ERR(sdhci->clk); | 
|  | dev_dbg(&pdev->dev, "Error getting clock\n"); | 
|  | goto err_clk_get; | 
|  | } | 
|  |  | 
|  | ret = clk_enable(sdhci->clk); | 
|  | if (ret) { | 
|  | dev_dbg(&pdev->dev, "Error enabling clock\n"); | 
|  | goto err_clk_enb; | 
|  | } | 
|  |  | 
|  | /* overwrite platform_data */ | 
|  | sdhci->data = dev_get_platdata(&pdev->dev); | 
|  | pdev->dev.platform_data = sdhci; | 
|  |  | 
|  | if (pdev->dev.parent) | 
|  | host = sdhci_alloc_host(pdev->dev.parent, 0); | 
|  | else | 
|  | host = sdhci_alloc_host(&pdev->dev, 0); | 
|  |  | 
|  | if (IS_ERR(host)) { | 
|  | ret = PTR_ERR(host); | 
|  | dev_dbg(&pdev->dev, "error allocating host\n"); | 
|  | goto err_alloc_host; | 
|  | } | 
|  |  | 
|  | host->hw_name = "sdhci"; | 
|  | host->ops = &sdhci_pltfm_ops; | 
|  | host->irq = platform_get_irq(pdev, 0); | 
|  | host->quirks = SDHCI_QUIRK_BROKEN_ADMA; | 
|  |  | 
|  | host->ioaddr = ioremap(iomem->start, resource_size(iomem)); | 
|  | if (!host->ioaddr) { | 
|  | ret = -ENOMEM; | 
|  | dev_dbg(&pdev->dev, "failed to remap registers\n"); | 
|  | goto err_ioremap; | 
|  | } | 
|  |  | 
|  | ret = sdhci_add_host(host); | 
|  | if (ret) { | 
|  | dev_dbg(&pdev->dev, "error adding host\n"); | 
|  | goto err_add_host; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, host); | 
|  |  | 
|  | /* | 
|  | * It is optional to use GPIOs for sdhci Power control & sdhci card | 
|  | * interrupt detection. If sdhci->data is NULL, then use original sdhci | 
|  | * lines otherwise GPIO lines. | 
|  | * If GPIO is selected for power control, then power should be disabled | 
|  | * after card removal and should be enabled when card insertion | 
|  | * interrupt occurs | 
|  | */ | 
|  | if (!sdhci->data) | 
|  | return 0; | 
|  |  | 
|  | if (sdhci->data->card_power_gpio >= 0) { | 
|  | int val = 0; | 
|  |  | 
|  | ret = gpio_request(sdhci->data->card_power_gpio, "sdhci"); | 
|  | if (ret < 0) { | 
|  | dev_dbg(&pdev->dev, "gpio request fail: %d\n", | 
|  | sdhci->data->card_power_gpio); | 
|  | goto err_pgpio_request; | 
|  | } | 
|  |  | 
|  | if (sdhci->data->power_always_enb) | 
|  | val = sdhci->data->power_active_high; | 
|  | else | 
|  | val = !sdhci->data->power_active_high; | 
|  |  | 
|  | ret = gpio_direction_output(sdhci->data->card_power_gpio, val); | 
|  | if (ret) { | 
|  | dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", | 
|  | sdhci->data->card_power_gpio); | 
|  | goto err_pgpio_direction; | 
|  | } | 
|  |  | 
|  | gpio_set_value(sdhci->data->card_power_gpio, 1); | 
|  | } | 
|  |  | 
|  | if (sdhci->data->card_int_gpio >= 0) { | 
|  | ret = gpio_request(sdhci->data->card_int_gpio, "sdhci"); | 
|  | if (ret < 0) { | 
|  | dev_dbg(&pdev->dev, "gpio request fail: %d\n", | 
|  | sdhci->data->card_int_gpio); | 
|  | goto err_igpio_request; | 
|  | } | 
|  |  | 
|  | ret = gpio_direction_input(sdhci->data->card_int_gpio); | 
|  | if (ret) { | 
|  | dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", | 
|  | sdhci->data->card_int_gpio); | 
|  | goto err_igpio_direction; | 
|  | } | 
|  | ret = request_irq(gpio_to_irq(sdhci->data->card_int_gpio), | 
|  | sdhci_gpio_irq, IRQF_TRIGGER_LOW, | 
|  | mmc_hostname(host->mmc), pdev); | 
|  | if (ret) { | 
|  | dev_dbg(&pdev->dev, "gpio request irq fail: %d\n", | 
|  | sdhci->data->card_int_gpio); | 
|  | goto err_igpio_request_irq; | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_igpio_request_irq: | 
|  | err_igpio_direction: | 
|  | if (sdhci->data->card_int_gpio >= 0) | 
|  | gpio_free(sdhci->data->card_int_gpio); | 
|  | err_igpio_request: | 
|  | err_pgpio_direction: | 
|  | if (sdhci->data->card_power_gpio >= 0) | 
|  | gpio_free(sdhci->data->card_power_gpio); | 
|  | err_pgpio_request: | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | sdhci_remove_host(host, 1); | 
|  | err_add_host: | 
|  | iounmap(host->ioaddr); | 
|  | err_ioremap: | 
|  | sdhci_free_host(host); | 
|  | err_alloc_host: | 
|  | clk_disable(sdhci->clk); | 
|  | err_clk_enb: | 
|  | clk_put(sdhci->clk); | 
|  | err_clk_get: | 
|  | kfree(sdhci); | 
|  | err_kzalloc: | 
|  | release_mem_region(iomem->start, resource_size(iomem)); | 
|  | err: | 
|  | dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit sdhci_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct sdhci_host *host = platform_get_drvdata(pdev); | 
|  | struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev); | 
|  | int dead; | 
|  | u32 scratch; | 
|  |  | 
|  | if (sdhci->data) { | 
|  | if (sdhci->data->card_int_gpio >= 0) { | 
|  | free_irq(gpio_to_irq(sdhci->data->card_int_gpio), pdev); | 
|  | gpio_free(sdhci->data->card_int_gpio); | 
|  | } | 
|  |  | 
|  | if (sdhci->data->card_power_gpio >= 0) | 
|  | gpio_free(sdhci->data->card_power_gpio); | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | dead = 0; | 
|  | scratch = readl(host->ioaddr + SDHCI_INT_STATUS); | 
|  | if (scratch == (u32)-1) | 
|  | dead = 1; | 
|  |  | 
|  | sdhci_remove_host(host, dead); | 
|  | iounmap(host->ioaddr); | 
|  | sdhci_free_host(host); | 
|  | clk_disable(sdhci->clk); | 
|  | clk_put(sdhci->clk); | 
|  | kfree(sdhci); | 
|  | if (iomem) | 
|  | release_mem_region(iomem->start, resource_size(iomem)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver sdhci_driver = { | 
|  | .driver = { | 
|  | .name	= "sdhci", | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | .probe		= sdhci_probe, | 
|  | .remove		= __devexit_p(sdhci_remove), | 
|  | }; | 
|  |  | 
|  | static int __init sdhci_init(void) | 
|  | { | 
|  | return platform_driver_register(&sdhci_driver); | 
|  | } | 
|  | module_init(sdhci_init); | 
|  |  | 
|  | static void __exit sdhci_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&sdhci_driver); | 
|  | } | 
|  | module_exit(sdhci_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver"); | 
|  | MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); | 
|  | MODULE_LICENSE("GPL v2"); |