|  | /* CPU control. | 
|  | * (C) 2001, 2002, 2003, 2004 Rusty Russell | 
|  | * | 
|  | * This code is licenced under the GPL. | 
|  | */ | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/smp.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/unistd.h> | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/stop_machine.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/gfp.h> | 
|  |  | 
|  | #ifdef CONFIG_SMP | 
|  | /* Serializes the updates to cpu_online_mask, cpu_present_mask */ | 
|  | static DEFINE_MUTEX(cpu_add_remove_lock); | 
|  |  | 
|  | /* | 
|  | * The following two API's must be used when attempting | 
|  | * to serialize the updates to cpu_online_mask, cpu_present_mask. | 
|  | */ | 
|  | void cpu_maps_update_begin(void) | 
|  | { | 
|  | mutex_lock(&cpu_add_remove_lock); | 
|  | } | 
|  |  | 
|  | void cpu_maps_update_done(void) | 
|  | { | 
|  | mutex_unlock(&cpu_add_remove_lock); | 
|  | } | 
|  |  | 
|  | static RAW_NOTIFIER_HEAD(cpu_chain); | 
|  |  | 
|  | /* If set, cpu_up and cpu_down will return -EBUSY and do nothing. | 
|  | * Should always be manipulated under cpu_add_remove_lock | 
|  | */ | 
|  | static int cpu_hotplug_disabled; | 
|  |  | 
|  | #ifdef CONFIG_HOTPLUG_CPU | 
|  |  | 
|  | static struct { | 
|  | struct task_struct *active_writer; | 
|  | struct mutex lock; /* Synchronizes accesses to refcount, */ | 
|  | /* | 
|  | * Also blocks the new readers during | 
|  | * an ongoing cpu hotplug operation. | 
|  | */ | 
|  | int refcount; | 
|  | } cpu_hotplug = { | 
|  | .active_writer = NULL, | 
|  | .lock = __MUTEX_INITIALIZER(cpu_hotplug.lock), | 
|  | .refcount = 0, | 
|  | }; | 
|  |  | 
|  | void get_online_cpus(void) | 
|  | { | 
|  | might_sleep(); | 
|  | if (cpu_hotplug.active_writer == current) | 
|  | return; | 
|  | mutex_lock(&cpu_hotplug.lock); | 
|  | cpu_hotplug.refcount++; | 
|  | mutex_unlock(&cpu_hotplug.lock); | 
|  |  | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(get_online_cpus); | 
|  |  | 
|  | void put_online_cpus(void) | 
|  | { | 
|  | if (cpu_hotplug.active_writer == current) | 
|  | return; | 
|  | mutex_lock(&cpu_hotplug.lock); | 
|  | if (!--cpu_hotplug.refcount && unlikely(cpu_hotplug.active_writer)) | 
|  | wake_up_process(cpu_hotplug.active_writer); | 
|  | mutex_unlock(&cpu_hotplug.lock); | 
|  |  | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(put_online_cpus); | 
|  |  | 
|  | /* | 
|  | * This ensures that the hotplug operation can begin only when the | 
|  | * refcount goes to zero. | 
|  | * | 
|  | * Note that during a cpu-hotplug operation, the new readers, if any, | 
|  | * will be blocked by the cpu_hotplug.lock | 
|  | * | 
|  | * Since cpu_hotplug_begin() is always called after invoking | 
|  | * cpu_maps_update_begin(), we can be sure that only one writer is active. | 
|  | * | 
|  | * Note that theoretically, there is a possibility of a livelock: | 
|  | * - Refcount goes to zero, last reader wakes up the sleeping | 
|  | *   writer. | 
|  | * - Last reader unlocks the cpu_hotplug.lock. | 
|  | * - A new reader arrives at this moment, bumps up the refcount. | 
|  | * - The writer acquires the cpu_hotplug.lock finds the refcount | 
|  | *   non zero and goes to sleep again. | 
|  | * | 
|  | * However, this is very difficult to achieve in practice since | 
|  | * get_online_cpus() not an api which is called all that often. | 
|  | * | 
|  | */ | 
|  | static void cpu_hotplug_begin(void) | 
|  | { | 
|  | cpu_hotplug.active_writer = current; | 
|  |  | 
|  | for (;;) { | 
|  | mutex_lock(&cpu_hotplug.lock); | 
|  | if (likely(!cpu_hotplug.refcount)) | 
|  | break; | 
|  | __set_current_state(TASK_UNINTERRUPTIBLE); | 
|  | mutex_unlock(&cpu_hotplug.lock); | 
|  | schedule(); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void cpu_hotplug_done(void) | 
|  | { | 
|  | cpu_hotplug.active_writer = NULL; | 
|  | mutex_unlock(&cpu_hotplug.lock); | 
|  | } | 
|  |  | 
|  | #else /* #if CONFIG_HOTPLUG_CPU */ | 
|  | static void cpu_hotplug_begin(void) {} | 
|  | static void cpu_hotplug_done(void) {} | 
|  | #endif	/* #esle #if CONFIG_HOTPLUG_CPU */ | 
|  |  | 
|  | /* Need to know about CPUs going up/down? */ | 
|  | int __ref register_cpu_notifier(struct notifier_block *nb) | 
|  | { | 
|  | int ret; | 
|  | cpu_maps_update_begin(); | 
|  | ret = raw_notifier_chain_register(&cpu_chain, nb); | 
|  | cpu_maps_update_done(); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __cpu_notify(unsigned long val, void *v, int nr_to_call, | 
|  | int *nr_calls) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = __raw_notifier_call_chain(&cpu_chain, val, v, nr_to_call, | 
|  | nr_calls); | 
|  |  | 
|  | return notifier_to_errno(ret); | 
|  | } | 
|  |  | 
|  | static int cpu_notify(unsigned long val, void *v) | 
|  | { | 
|  | return __cpu_notify(val, v, -1, NULL); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_HOTPLUG_CPU | 
|  |  | 
|  | static void cpu_notify_nofail(unsigned long val, void *v) | 
|  | { | 
|  | BUG_ON(cpu_notify(val, v)); | 
|  | } | 
|  | EXPORT_SYMBOL(register_cpu_notifier); | 
|  |  | 
|  | void __ref unregister_cpu_notifier(struct notifier_block *nb) | 
|  | { | 
|  | cpu_maps_update_begin(); | 
|  | raw_notifier_chain_unregister(&cpu_chain, nb); | 
|  | cpu_maps_update_done(); | 
|  | } | 
|  | EXPORT_SYMBOL(unregister_cpu_notifier); | 
|  |  | 
|  | static inline void check_for_tasks(int cpu) | 
|  | { | 
|  | struct task_struct *p; | 
|  |  | 
|  | write_lock_irq(&tasklist_lock); | 
|  | for_each_process(p) { | 
|  | if (task_cpu(p) == cpu && p->state == TASK_RUNNING && | 
|  | (!cputime_eq(p->utime, cputime_zero) || | 
|  | !cputime_eq(p->stime, cputime_zero))) | 
|  | printk(KERN_WARNING "Task %s (pid = %d) is on cpu %d " | 
|  | "(state = %ld, flags = %x)\n", | 
|  | p->comm, task_pid_nr(p), cpu, | 
|  | p->state, p->flags); | 
|  | } | 
|  | write_unlock_irq(&tasklist_lock); | 
|  | } | 
|  |  | 
|  | struct take_cpu_down_param { | 
|  | unsigned long mod; | 
|  | void *hcpu; | 
|  | }; | 
|  |  | 
|  | /* Take this CPU down. */ | 
|  | static int __ref take_cpu_down(void *_param) | 
|  | { | 
|  | struct take_cpu_down_param *param = _param; | 
|  | int err; | 
|  |  | 
|  | /* Ensure this CPU doesn't handle any more interrupts. */ | 
|  | err = __cpu_disable(); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | cpu_notify(CPU_DYING | param->mod, param->hcpu); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Requires cpu_add_remove_lock to be held */ | 
|  | static int __ref _cpu_down(unsigned int cpu, int tasks_frozen) | 
|  | { | 
|  | int err, nr_calls = 0; | 
|  | void *hcpu = (void *)(long)cpu; | 
|  | unsigned long mod = tasks_frozen ? CPU_TASKS_FROZEN : 0; | 
|  | struct take_cpu_down_param tcd_param = { | 
|  | .mod = mod, | 
|  | .hcpu = hcpu, | 
|  | }; | 
|  |  | 
|  | if (num_online_cpus() == 1) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (!cpu_online(cpu)) | 
|  | return -EINVAL; | 
|  |  | 
|  | cpu_hotplug_begin(); | 
|  |  | 
|  | err = __cpu_notify(CPU_DOWN_PREPARE | mod, hcpu, -1, &nr_calls); | 
|  | if (err) { | 
|  | nr_calls--; | 
|  | __cpu_notify(CPU_DOWN_FAILED | mod, hcpu, nr_calls, NULL); | 
|  | printk("%s: attempt to take down CPU %u failed\n", | 
|  | __func__, cpu); | 
|  | goto out_release; | 
|  | } | 
|  |  | 
|  | err = __stop_machine(take_cpu_down, &tcd_param, cpumask_of(cpu)); | 
|  | if (err) { | 
|  | /* CPU didn't die: tell everyone.  Can't complain. */ | 
|  | cpu_notify_nofail(CPU_DOWN_FAILED | mod, hcpu); | 
|  |  | 
|  | goto out_release; | 
|  | } | 
|  | BUG_ON(cpu_online(cpu)); | 
|  |  | 
|  | /* | 
|  | * The migration_call() CPU_DYING callback will have removed all | 
|  | * runnable tasks from the cpu, there's only the idle task left now | 
|  | * that the migration thread is done doing the stop_machine thing. | 
|  | * | 
|  | * Wait for the stop thread to go away. | 
|  | */ | 
|  | while (!idle_cpu(cpu)) | 
|  | cpu_relax(); | 
|  |  | 
|  | /* This actually kills the CPU. */ | 
|  | __cpu_die(cpu); | 
|  |  | 
|  | /* CPU is completely dead: tell everyone.  Too late to complain. */ | 
|  | cpu_notify_nofail(CPU_DEAD | mod, hcpu); | 
|  |  | 
|  | check_for_tasks(cpu); | 
|  |  | 
|  | out_release: | 
|  | cpu_hotplug_done(); | 
|  | if (!err) | 
|  | cpu_notify_nofail(CPU_POST_DEAD | mod, hcpu); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int __ref cpu_down(unsigned int cpu) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | cpu_maps_update_begin(); | 
|  |  | 
|  | if (cpu_hotplug_disabled) { | 
|  | err = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | err = _cpu_down(cpu, 0); | 
|  |  | 
|  | out: | 
|  | cpu_maps_update_done(); | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL(cpu_down); | 
|  | #endif /*CONFIG_HOTPLUG_CPU*/ | 
|  |  | 
|  | /* Requires cpu_add_remove_lock to be held */ | 
|  | static int __cpuinit _cpu_up(unsigned int cpu, int tasks_frozen) | 
|  | { | 
|  | int ret, nr_calls = 0; | 
|  | void *hcpu = (void *)(long)cpu; | 
|  | unsigned long mod = tasks_frozen ? CPU_TASKS_FROZEN : 0; | 
|  |  | 
|  | if (cpu_online(cpu) || !cpu_present(cpu)) | 
|  | return -EINVAL; | 
|  |  | 
|  | cpu_hotplug_begin(); | 
|  | ret = __cpu_notify(CPU_UP_PREPARE | mod, hcpu, -1, &nr_calls); | 
|  | if (ret) { | 
|  | nr_calls--; | 
|  | printk(KERN_WARNING "%s: attempt to bring up CPU %u failed\n", | 
|  | __func__, cpu); | 
|  | goto out_notify; | 
|  | } | 
|  |  | 
|  | /* Arch-specific enabling code. */ | 
|  | ret = __cpu_up(cpu); | 
|  | if (ret != 0) | 
|  | goto out_notify; | 
|  | BUG_ON(!cpu_online(cpu)); | 
|  |  | 
|  | /* Now call notifier in preparation. */ | 
|  | cpu_notify(CPU_ONLINE | mod, hcpu); | 
|  |  | 
|  | out_notify: | 
|  | if (ret != 0) | 
|  | __cpu_notify(CPU_UP_CANCELED | mod, hcpu, nr_calls, NULL); | 
|  | cpu_hotplug_done(); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int __cpuinit cpu_up(unsigned int cpu) | 
|  | { | 
|  | int err = 0; | 
|  |  | 
|  | #ifdef	CONFIG_MEMORY_HOTPLUG | 
|  | int nid; | 
|  | pg_data_t	*pgdat; | 
|  | #endif | 
|  |  | 
|  | if (!cpu_possible(cpu)) { | 
|  | printk(KERN_ERR "can't online cpu %d because it is not " | 
|  | "configured as may-hotadd at boot time\n", cpu); | 
|  | #if defined(CONFIG_IA64) | 
|  | printk(KERN_ERR "please check additional_cpus= boot " | 
|  | "parameter\n"); | 
|  | #endif | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | #ifdef	CONFIG_MEMORY_HOTPLUG | 
|  | nid = cpu_to_node(cpu); | 
|  | if (!node_online(nid)) { | 
|  | err = mem_online_node(nid); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | pgdat = NODE_DATA(nid); | 
|  | if (!pgdat) { | 
|  | printk(KERN_ERR | 
|  | "Can't online cpu %d due to NULL pgdat\n", cpu); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | if (pgdat->node_zonelists->_zonerefs->zone == NULL) { | 
|  | mutex_lock(&zonelists_mutex); | 
|  | build_all_zonelists(NULL); | 
|  | mutex_unlock(&zonelists_mutex); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | cpu_maps_update_begin(); | 
|  |  | 
|  | if (cpu_hotplug_disabled) { | 
|  | err = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | err = _cpu_up(cpu, 0); | 
|  |  | 
|  | out: | 
|  | cpu_maps_update_done(); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP_SMP | 
|  | static cpumask_var_t frozen_cpus; | 
|  |  | 
|  | void __weak arch_disable_nonboot_cpus_begin(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | void __weak arch_disable_nonboot_cpus_end(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | int disable_nonboot_cpus(void) | 
|  | { | 
|  | int cpu, first_cpu, error = 0; | 
|  |  | 
|  | cpu_maps_update_begin(); | 
|  | first_cpu = cpumask_first(cpu_online_mask); | 
|  | /* | 
|  | * We take down all of the non-boot CPUs in one shot to avoid races | 
|  | * with the userspace trying to use the CPU hotplug at the same time | 
|  | */ | 
|  | cpumask_clear(frozen_cpus); | 
|  | arch_disable_nonboot_cpus_begin(); | 
|  |  | 
|  | printk("Disabling non-boot CPUs ...\n"); | 
|  | for_each_online_cpu(cpu) { | 
|  | if (cpu == first_cpu) | 
|  | continue; | 
|  | error = _cpu_down(cpu, 1); | 
|  | if (!error) | 
|  | cpumask_set_cpu(cpu, frozen_cpus); | 
|  | else { | 
|  | printk(KERN_ERR "Error taking CPU%d down: %d\n", | 
|  | cpu, error); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | arch_disable_nonboot_cpus_end(); | 
|  |  | 
|  | if (!error) { | 
|  | BUG_ON(num_online_cpus() > 1); | 
|  | /* Make sure the CPUs won't be enabled by someone else */ | 
|  | cpu_hotplug_disabled = 1; | 
|  | } else { | 
|  | printk(KERN_ERR "Non-boot CPUs are not disabled\n"); | 
|  | } | 
|  | cpu_maps_update_done(); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | void __weak arch_enable_nonboot_cpus_begin(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | void __weak arch_enable_nonboot_cpus_end(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | void __ref enable_nonboot_cpus(void) | 
|  | { | 
|  | int cpu, error; | 
|  |  | 
|  | /* Allow everyone to use the CPU hotplug again */ | 
|  | cpu_maps_update_begin(); | 
|  | cpu_hotplug_disabled = 0; | 
|  | if (cpumask_empty(frozen_cpus)) | 
|  | goto out; | 
|  |  | 
|  | printk(KERN_INFO "Enabling non-boot CPUs ...\n"); | 
|  |  | 
|  | arch_enable_nonboot_cpus_begin(); | 
|  |  | 
|  | for_each_cpu(cpu, frozen_cpus) { | 
|  | error = _cpu_up(cpu, 1); | 
|  | if (!error) { | 
|  | printk(KERN_INFO "CPU%d is up\n", cpu); | 
|  | continue; | 
|  | } | 
|  | printk(KERN_WARNING "Error taking CPU%d up: %d\n", cpu, error); | 
|  | } | 
|  |  | 
|  | arch_enable_nonboot_cpus_end(); | 
|  |  | 
|  | cpumask_clear(frozen_cpus); | 
|  | out: | 
|  | cpu_maps_update_done(); | 
|  | } | 
|  |  | 
|  | static int alloc_frozen_cpus(void) | 
|  | { | 
|  | if (!alloc_cpumask_var(&frozen_cpus, GFP_KERNEL|__GFP_ZERO)) | 
|  | return -ENOMEM; | 
|  | return 0; | 
|  | } | 
|  | core_initcall(alloc_frozen_cpus); | 
|  | #endif /* CONFIG_PM_SLEEP_SMP */ | 
|  |  | 
|  | /** | 
|  | * notify_cpu_starting(cpu) - call the CPU_STARTING notifiers | 
|  | * @cpu: cpu that just started | 
|  | * | 
|  | * This function calls the cpu_chain notifiers with CPU_STARTING. | 
|  | * It must be called by the arch code on the new cpu, before the new cpu | 
|  | * enables interrupts and before the "boot" cpu returns from __cpu_up(). | 
|  | */ | 
|  | void __cpuinit notify_cpu_starting(unsigned int cpu) | 
|  | { | 
|  | unsigned long val = CPU_STARTING; | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP_SMP | 
|  | if (frozen_cpus != NULL && cpumask_test_cpu(cpu, frozen_cpus)) | 
|  | val = CPU_STARTING_FROZEN; | 
|  | #endif /* CONFIG_PM_SLEEP_SMP */ | 
|  | cpu_notify(val, (void *)(long)cpu); | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_SMP */ | 
|  |  | 
|  | /* | 
|  | * cpu_bit_bitmap[] is a special, "compressed" data structure that | 
|  | * represents all NR_CPUS bits binary values of 1<<nr. | 
|  | * | 
|  | * It is used by cpumask_of() to get a constant address to a CPU | 
|  | * mask value that has a single bit set only. | 
|  | */ | 
|  |  | 
|  | /* cpu_bit_bitmap[0] is empty - so we can back into it */ | 
|  | #define MASK_DECLARE_1(x)	[x+1][0] = (1UL << (x)) | 
|  | #define MASK_DECLARE_2(x)	MASK_DECLARE_1(x), MASK_DECLARE_1(x+1) | 
|  | #define MASK_DECLARE_4(x)	MASK_DECLARE_2(x), MASK_DECLARE_2(x+2) | 
|  | #define MASK_DECLARE_8(x)	MASK_DECLARE_4(x), MASK_DECLARE_4(x+4) | 
|  |  | 
|  | const unsigned long cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)] = { | 
|  |  | 
|  | MASK_DECLARE_8(0),	MASK_DECLARE_8(8), | 
|  | MASK_DECLARE_8(16),	MASK_DECLARE_8(24), | 
|  | #if BITS_PER_LONG > 32 | 
|  | MASK_DECLARE_8(32),	MASK_DECLARE_8(40), | 
|  | MASK_DECLARE_8(48),	MASK_DECLARE_8(56), | 
|  | #endif | 
|  | }; | 
|  | EXPORT_SYMBOL_GPL(cpu_bit_bitmap); | 
|  |  | 
|  | const DECLARE_BITMAP(cpu_all_bits, NR_CPUS) = CPU_BITS_ALL; | 
|  | EXPORT_SYMBOL(cpu_all_bits); | 
|  |  | 
|  | #ifdef CONFIG_INIT_ALL_POSSIBLE | 
|  | static DECLARE_BITMAP(cpu_possible_bits, CONFIG_NR_CPUS) __read_mostly | 
|  | = CPU_BITS_ALL; | 
|  | #else | 
|  | static DECLARE_BITMAP(cpu_possible_bits, CONFIG_NR_CPUS) __read_mostly; | 
|  | #endif | 
|  | const struct cpumask *const cpu_possible_mask = to_cpumask(cpu_possible_bits); | 
|  | EXPORT_SYMBOL(cpu_possible_mask); | 
|  |  | 
|  | static DECLARE_BITMAP(cpu_online_bits, CONFIG_NR_CPUS) __read_mostly; | 
|  | const struct cpumask *const cpu_online_mask = to_cpumask(cpu_online_bits); | 
|  | EXPORT_SYMBOL(cpu_online_mask); | 
|  |  | 
|  | static DECLARE_BITMAP(cpu_present_bits, CONFIG_NR_CPUS) __read_mostly; | 
|  | const struct cpumask *const cpu_present_mask = to_cpumask(cpu_present_bits); | 
|  | EXPORT_SYMBOL(cpu_present_mask); | 
|  |  | 
|  | static DECLARE_BITMAP(cpu_active_bits, CONFIG_NR_CPUS) __read_mostly; | 
|  | const struct cpumask *const cpu_active_mask = to_cpumask(cpu_active_bits); | 
|  | EXPORT_SYMBOL(cpu_active_mask); | 
|  |  | 
|  | void set_cpu_possible(unsigned int cpu, bool possible) | 
|  | { | 
|  | if (possible) | 
|  | cpumask_set_cpu(cpu, to_cpumask(cpu_possible_bits)); | 
|  | else | 
|  | cpumask_clear_cpu(cpu, to_cpumask(cpu_possible_bits)); | 
|  | } | 
|  |  | 
|  | void set_cpu_present(unsigned int cpu, bool present) | 
|  | { | 
|  | if (present) | 
|  | cpumask_set_cpu(cpu, to_cpumask(cpu_present_bits)); | 
|  | else | 
|  | cpumask_clear_cpu(cpu, to_cpumask(cpu_present_bits)); | 
|  | } | 
|  |  | 
|  | void set_cpu_online(unsigned int cpu, bool online) | 
|  | { | 
|  | if (online) | 
|  | cpumask_set_cpu(cpu, to_cpumask(cpu_online_bits)); | 
|  | else | 
|  | cpumask_clear_cpu(cpu, to_cpumask(cpu_online_bits)); | 
|  | } | 
|  |  | 
|  | void set_cpu_active(unsigned int cpu, bool active) | 
|  | { | 
|  | if (active) | 
|  | cpumask_set_cpu(cpu, to_cpumask(cpu_active_bits)); | 
|  | else | 
|  | cpumask_clear_cpu(cpu, to_cpumask(cpu_active_bits)); | 
|  | } | 
|  |  | 
|  | void init_cpu_present(const struct cpumask *src) | 
|  | { | 
|  | cpumask_copy(to_cpumask(cpu_present_bits), src); | 
|  | } | 
|  |  | 
|  | void init_cpu_possible(const struct cpumask *src) | 
|  | { | 
|  | cpumask_copy(to_cpumask(cpu_possible_bits), src); | 
|  | } | 
|  |  | 
|  | void init_cpu_online(const struct cpumask *src) | 
|  | { | 
|  | cpumask_copy(to_cpumask(cpu_online_bits), src); | 
|  | } |