ASoC: wm8962: Remove remaining direct register cache accesses
commit 2e7ee15ced914e109a1a5b6dfcd463d846a13bd5 upstream.
Also fix return values for headphone switch updates.
Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 96f6f9f..e96c6ed 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -1599,7 +1599,6 @@
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
@@ -1608,16 +1607,19 @@
return 0;
/* If the left PGA is enabled hit that VU bit... */
- if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTL_PGA_ENA)
- return snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
- reg_cache[WM8962_HPOUTL_VOLUME]);
+ ret = snd_soc_read(codec, WM8962_PWR_MGMT_2);
+ if (ret & WM8962_HPOUTL_PGA_ENA) {
+ snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
+ snd_soc_read(codec, WM8962_HPOUTL_VOLUME));
+ return 1;
+ }
/* ...otherwise the right. The VU is stereo. */
- if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTR_PGA_ENA)
- return snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
- reg_cache[WM8962_HPOUTR_VOLUME]);
+ if (ret & WM8962_HPOUTR_PGA_ENA)
+ snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
+ snd_soc_read(codec, WM8962_HPOUTR_VOLUME));
- return 0;
+ return 1;
}
/* The VU bits for the speakers are in a different register to the mute
@@ -3363,7 +3365,6 @@
int ret;
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
- u16 *reg_cache = codec->reg_cache;
int i, trigger, irq_pol;
bool dmicclk, dmicdat;
@@ -3421,8 +3422,9 @@
/* Put the speakers into mono mode? */
if (pdata->spk_mono)
- reg_cache[WM8962_CLASS_D_CONTROL_2]
- |= WM8962_SPK_MONO;
+ snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_2,
+ WM8962_SPK_MONO_MASK, WM8962_SPK_MONO);
+
/* Micbias setup, detection enable and detection
* threasholds. */