| /* | 
 |  * Alpha specific irq code. | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/kernel_stat.h> | 
 | #include <linux/module.h> | 
 |  | 
 | #include <asm/machvec.h> | 
 | #include <asm/dma.h> | 
 |  | 
 | #include "proto.h" | 
 | #include "irq_impl.h" | 
 |  | 
 | /* Hack minimum IPL during interrupt processing for broken hardware.  */ | 
 | #ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK | 
 | int __min_ipl; | 
 | EXPORT_SYMBOL(__min_ipl); | 
 | #endif | 
 |  | 
 | /* | 
 |  * Performance counter hook.  A module can override this to | 
 |  * do something useful. | 
 |  */ | 
 | static void | 
 | dummy_perf(unsigned long vector, struct pt_regs *regs) | 
 | { | 
 | 	irq_err_count++; | 
 | 	printk(KERN_CRIT "Performance counter interrupt!\n"); | 
 | } | 
 |  | 
 | void (*perf_irq)(unsigned long, struct pt_regs *) = dummy_perf; | 
 | EXPORT_SYMBOL(perf_irq); | 
 |  | 
 | /* | 
 |  * The main interrupt entry point. | 
 |  */ | 
 |  | 
 | asmlinkage void  | 
 | do_entInt(unsigned long type, unsigned long vector, | 
 | 	  unsigned long la_ptr, struct pt_regs *regs) | 
 | { | 
 | 	struct pt_regs *old_regs; | 
 | 	switch (type) { | 
 | 	case 0: | 
 | #ifdef CONFIG_SMP | 
 | 		handle_ipi(regs); | 
 | 		return; | 
 | #else | 
 | 		irq_err_count++; | 
 | 		printk(KERN_CRIT "Interprocessor interrupt? " | 
 | 		       "You must be kidding!\n"); | 
 | #endif | 
 | 		break; | 
 | 	case 1: | 
 | 		old_regs = set_irq_regs(regs); | 
 | #ifdef CONFIG_SMP | 
 | 	  { | 
 | 		long cpu; | 
 |  | 
 | 		local_irq_disable(); | 
 | 		smp_percpu_timer_interrupt(regs); | 
 | 		cpu = smp_processor_id(); | 
 | 		if (cpu != boot_cpuid) { | 
 | 		        kstat_cpu(cpu).irqs[RTC_IRQ]++; | 
 | 		} else { | 
 | 			handle_irq(RTC_IRQ); | 
 | 		} | 
 | 	  } | 
 | #else | 
 | 		handle_irq(RTC_IRQ); | 
 | #endif | 
 | 		set_irq_regs(old_regs); | 
 | 		return; | 
 | 	case 2: | 
 | 		old_regs = set_irq_regs(regs); | 
 | 		alpha_mv.machine_check(vector, la_ptr); | 
 | 		set_irq_regs(old_regs); | 
 | 		return; | 
 | 	case 3: | 
 | 		old_regs = set_irq_regs(regs); | 
 | 		alpha_mv.device_interrupt(vector); | 
 | 		set_irq_regs(old_regs); | 
 | 		return; | 
 | 	case 4: | 
 | 		perf_irq(la_ptr, regs); | 
 | 		return; | 
 | 	default: | 
 | 		printk(KERN_CRIT "Hardware intr %ld %lx? Huh?\n", | 
 | 		       type, vector); | 
 | 	} | 
 | 	printk(KERN_CRIT "PC = %016lx PS=%04lx\n", regs->pc, regs->ps); | 
 | } | 
 |  | 
 | void __init | 
 | common_init_isa_dma(void) | 
 | { | 
 | 	outb(0, DMA1_RESET_REG); | 
 | 	outb(0, DMA2_RESET_REG); | 
 | 	outb(0, DMA1_CLR_MASK_REG); | 
 | 	outb(0, DMA2_CLR_MASK_REG); | 
 | } | 
 |  | 
 | void __init | 
 | init_IRQ(void) | 
 | { | 
 | 	/* Just in case the platform init_irq() causes interrupts/mchecks | 
 | 	   (as is the case with RAWHIDE, at least).  */ | 
 | 	wrent(entInt, 0); | 
 |  | 
 | 	alpha_mv.init_irq(); | 
 | } | 
 |  | 
 | /* | 
 |  * machine error checks | 
 |  */ | 
 | #define MCHK_K_TPERR           0x0080 | 
 | #define MCHK_K_TCPERR          0x0082 | 
 | #define MCHK_K_HERR            0x0084 | 
 | #define MCHK_K_ECC_C           0x0086 | 
 | #define MCHK_K_ECC_NC          0x0088 | 
 | #define MCHK_K_OS_BUGCHECK     0x008A | 
 | #define MCHK_K_PAL_BUGCHECK    0x0090 | 
 |  | 
 | #ifndef CONFIG_SMP | 
 | struct mcheck_info __mcheck_info; | 
 | #endif | 
 |  | 
 | void | 
 | process_mcheck_info(unsigned long vector, unsigned long la_ptr, | 
 | 		    const char *machine, int expected) | 
 | { | 
 | 	struct el_common *mchk_header; | 
 | 	const char *reason; | 
 |  | 
 | 	/* | 
 | 	 * See if the machine check is due to a badaddr() and if so, | 
 | 	 * ignore it. | 
 | 	 */ | 
 |  | 
 | #ifdef CONFIG_VERBOSE_MCHECK | 
 | 	if (alpha_verbose_mcheck > 1) { | 
 | 		printk(KERN_CRIT "%s machine check %s\n", machine, | 
 | 		       expected ? "expected." : "NOT expected!!!"); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	if (expected) { | 
 | 		int cpu = smp_processor_id(); | 
 | 		mcheck_expected(cpu) = 0; | 
 | 		mcheck_taken(cpu) = 1; | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	mchk_header = (struct el_common *)la_ptr; | 
 |  | 
 | 	printk(KERN_CRIT "%s machine check: vector=0x%lx pc=0x%lx code=0x%x\n", | 
 | 	       machine, vector, get_irq_regs()->pc, mchk_header->code); | 
 |  | 
 | 	switch (mchk_header->code) { | 
 | 	/* Machine check reasons.  Defined according to PALcode sources.  */ | 
 | 	case 0x80: reason = "tag parity error"; break; | 
 | 	case 0x82: reason = "tag control parity error"; break; | 
 | 	case 0x84: reason = "generic hard error"; break; | 
 | 	case 0x86: reason = "correctable ECC error"; break; | 
 | 	case 0x88: reason = "uncorrectable ECC error"; break; | 
 | 	case 0x8A: reason = "OS-specific PAL bugcheck"; break; | 
 | 	case 0x90: reason = "callsys in kernel mode"; break; | 
 | 	case 0x96: reason = "i-cache read retryable error"; break; | 
 | 	case 0x98: reason = "processor detected hard error"; break; | 
 | 	 | 
 | 	/* System specific (these are for Alcor, at least): */ | 
 | 	case 0x202: reason = "system detected hard error"; break; | 
 | 	case 0x203: reason = "system detected uncorrectable ECC error"; break; | 
 | 	case 0x204: reason = "SIO SERR occurred on PCI bus"; break; | 
 | 	case 0x205: reason = "parity error detected by core logic"; break; | 
 | 	case 0x206: reason = "SIO IOCHK occurred on ISA bus"; break; | 
 | 	case 0x207: reason = "non-existent memory error"; break; | 
 | 	case 0x208: reason = "MCHK_K_DCSR"; break; | 
 | 	case 0x209: reason = "PCI SERR detected"; break; | 
 | 	case 0x20b: reason = "PCI data parity error detected"; break; | 
 | 	case 0x20d: reason = "PCI address parity error detected"; break; | 
 | 	case 0x20f: reason = "PCI master abort error"; break; | 
 | 	case 0x211: reason = "PCI target abort error"; break; | 
 | 	case 0x213: reason = "scatter/gather PTE invalid error"; break; | 
 | 	case 0x215: reason = "flash ROM write error"; break; | 
 | 	case 0x217: reason = "IOA timeout detected"; break; | 
 | 	case 0x219: reason = "IOCHK#, EISA add-in board parity or other catastrophic error"; break; | 
 | 	case 0x21b: reason = "EISA fail-safe timer timeout"; break; | 
 | 	case 0x21d: reason = "EISA bus time-out"; break; | 
 | 	case 0x21f: reason = "EISA software generated NMI"; break; | 
 | 	case 0x221: reason = "unexpected ev5 IRQ[3] interrupt"; break; | 
 | 	default: reason = "unknown"; break; | 
 | 	} | 
 |  | 
 | 	printk(KERN_CRIT "machine check type: %s%s\n", | 
 | 	       reason, mchk_header->retry ? " (retryable)" : ""); | 
 |  | 
 | 	dik_show_regs(get_irq_regs(), NULL); | 
 |  | 
 | #ifdef CONFIG_VERBOSE_MCHECK | 
 | 	if (alpha_verbose_mcheck > 1) { | 
 | 		/* Dump the logout area to give all info.  */ | 
 | 		unsigned long *ptr = (unsigned long *)la_ptr; | 
 | 		long i; | 
 | 		for (i = 0; i < mchk_header->size / sizeof(long); i += 2) { | 
 | 			printk(KERN_CRIT "   +%8lx %016lx %016lx\n", | 
 | 			       i*sizeof(long), ptr[i], ptr[i+1]); | 
 | 		} | 
 | 	} | 
 | #endif /* CONFIG_VERBOSE_MCHECK */ | 
 | } | 
 |  | 
 | /* | 
 |  * The special RTC interrupt type.  The interrupt itself was | 
 |  * processed by PALcode, and comes in via entInt vector 1. | 
 |  */ | 
 |  | 
 | static void rtc_enable_disable(unsigned int irq) { } | 
 | static unsigned int rtc_startup(unsigned int irq) { return 0; } | 
 |  | 
 | struct irqaction timer_irqaction = { | 
 | 	.handler	= timer_interrupt, | 
 | 	.flags		= IRQF_DISABLED, | 
 | 	.name		= "timer", | 
 | }; | 
 |  | 
 | static struct hw_interrupt_type rtc_irq_type = { | 
 | 	.typename	= "RTC", | 
 | 	.startup	= rtc_startup, | 
 | 	.shutdown	= rtc_enable_disable, | 
 | 	.enable		= rtc_enable_disable, | 
 | 	.disable	= rtc_enable_disable, | 
 | 	.ack		= rtc_enable_disable, | 
 | 	.end		= rtc_enable_disable, | 
 | }; | 
 |  | 
 | void __init | 
 | init_rtc_irq(void) | 
 | { | 
 | 	irq_desc[RTC_IRQ].status = IRQ_DISABLED; | 
 | 	irq_desc[RTC_IRQ].chip = &rtc_irq_type; | 
 | 	setup_irq(RTC_IRQ, &timer_irqaction); | 
 | } | 
 |  | 
 | /* Dummy irqactions.  */ | 
 | struct irqaction isa_cascade_irqaction = { | 
 | 	.handler	= no_action, | 
 | 	.name		= "isa-cascade" | 
 | }; | 
 |  | 
 | struct irqaction timer_cascade_irqaction = { | 
 | 	.handler	= no_action, | 
 | 	.name		= "timer-cascade" | 
 | }; | 
 |  | 
 | struct irqaction halt_switch_irqaction = { | 
 | 	.handler	= no_action, | 
 | 	.name		= "halt-switch" | 
 | }; |