|  | /* | 
|  | * Copyright (c) 2008, 2009 open80211s Ltd. | 
|  | * Authors:    Luis Carlos Cobo <luisca@cozybit.com> | 
|  | * 	       Javier Cardona <javier@cozybit.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/slab.h> | 
|  | #include <asm/unaligned.h> | 
|  | #include "ieee80211_i.h" | 
|  | #include "mesh.h" | 
|  |  | 
|  | #define MESHCONF_CAPAB_ACCEPT_PLINKS 0x01 | 
|  | #define MESHCONF_CAPAB_FORWARDING    0x08 | 
|  |  | 
|  | #define TMR_RUNNING_HK	0 | 
|  | #define TMR_RUNNING_MP	1 | 
|  | #define TMR_RUNNING_MPR	2 | 
|  |  | 
|  | int mesh_allocated; | 
|  | static struct kmem_cache *rm_cache; | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) | 
|  | { | 
|  | return (mgmt->u.action.u.mesh_action.action_code == | 
|  | WLAN_MESH_ACTION_HWMP_PATH_SELECTION); | 
|  | } | 
|  | #else | 
|  | bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) | 
|  | { return false; } | 
|  | #endif | 
|  |  | 
|  | void ieee80211s_init(void) | 
|  | { | 
|  | mesh_pathtbl_init(); | 
|  | mesh_allocated = 1; | 
|  | rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry), | 
|  | 0, 0, NULL); | 
|  | } | 
|  |  | 
|  | void ieee80211s_stop(void) | 
|  | { | 
|  | mesh_pathtbl_unregister(); | 
|  | kmem_cache_destroy(rm_cache); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_housekeeping_timer(unsigned long data) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = (void *) data; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); | 
|  |  | 
|  | if (local->quiescing) { | 
|  | set_bit(TMR_RUNNING_HK, &ifmsh->timers_running); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ieee80211_queue_work(&local->hw, &sdata->work); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mesh_matches_local - check if the config of a mesh point matches ours | 
|  | * | 
|  | * @ie: information elements of a management frame from the mesh peer | 
|  | * @sdata: local mesh subif | 
|  | * | 
|  | * This function checks if the mesh configuration of a mesh point matches the | 
|  | * local mesh configuration, i.e. if both nodes belong to the same mesh network. | 
|  | */ | 
|  | bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | /* | 
|  | * As support for each feature is added, check for matching | 
|  | * - On mesh config capabilities | 
|  | *   - Power Save Support En | 
|  | *   - Sync support enabled | 
|  | *   - Sync support active | 
|  | *   - Sync support required from peer | 
|  | *   - MDA enabled | 
|  | * - Power management control on fc | 
|  | */ | 
|  | if (!(ifmsh->mesh_id_len == ie->mesh_id_len && | 
|  | memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 && | 
|  | (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) && | 
|  | (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) && | 
|  | (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) && | 
|  | (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) && | 
|  | (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth))) | 
|  | goto mismatch; | 
|  |  | 
|  | /* disallow peering with mismatched channel types for now */ | 
|  | if (ie->ht_info_elem && | 
|  | (local->_oper_channel_type != | 
|  | ieee80211_ht_info_to_channel_type(ie->ht_info_elem))) | 
|  | goto mismatch; | 
|  |  | 
|  | return true; | 
|  | mismatch: | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links | 
|  | * | 
|  | * @ie: information elements of a management frame from the mesh peer | 
|  | */ | 
|  | bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie) | 
|  | { | 
|  | return (ie->mesh_config->meshconf_cap & | 
|  | MESHCONF_CAPAB_ACCEPT_PLINKS) != 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mesh_accept_plinks_update: update accepting_plink in local mesh beacons | 
|  | * | 
|  | * @sdata: mesh interface in which mesh beacons are going to be updated | 
|  | */ | 
|  | void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | bool free_plinks; | 
|  |  | 
|  | /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0, | 
|  | * the mesh interface might be able to establish plinks with peers that | 
|  | * are already on the table but are not on PLINK_ESTAB state. However, | 
|  | * in general the mesh interface is not accepting peer link requests | 
|  | * from new peers, and that must be reflected in the beacon | 
|  | */ | 
|  | free_plinks = mesh_plink_availables(sdata); | 
|  |  | 
|  | if (free_plinks != sdata->u.mesh.accepting_plinks) | 
|  | ieee80211_mesh_housekeeping_timer((unsigned long) sdata); | 
|  | } | 
|  |  | 
|  | int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL); | 
|  | if (!sdata->u.mesh.rmc) | 
|  | return -ENOMEM; | 
|  | sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1; | 
|  | for (i = 0; i < RMC_BUCKETS; i++) | 
|  | INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i].list); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void mesh_rmc_free(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct mesh_rmc *rmc = sdata->u.mesh.rmc; | 
|  | struct rmc_entry *p, *n; | 
|  | int i; | 
|  |  | 
|  | if (!sdata->u.mesh.rmc) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < RMC_BUCKETS; i++) | 
|  | list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) { | 
|  | list_del(&p->list); | 
|  | kmem_cache_free(rm_cache, p); | 
|  | } | 
|  |  | 
|  | kfree(rmc); | 
|  | sdata->u.mesh.rmc = NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mesh_rmc_check - Check frame in recent multicast cache and add if absent. | 
|  | * | 
|  | * @sa:		source address | 
|  | * @mesh_hdr:	mesh_header | 
|  | * | 
|  | * Returns: 0 if the frame is not in the cache, nonzero otherwise. | 
|  | * | 
|  | * Checks using the source address and the mesh sequence number if we have | 
|  | * received this frame lately. If the frame is not in the cache, it is added to | 
|  | * it. | 
|  | */ | 
|  | int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr, | 
|  | struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct mesh_rmc *rmc = sdata->u.mesh.rmc; | 
|  | u32 seqnum = 0; | 
|  | int entries = 0; | 
|  | u8 idx; | 
|  | struct rmc_entry *p, *n; | 
|  |  | 
|  | /* Don't care about endianness since only match matters */ | 
|  | memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum)); | 
|  | idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask; | 
|  | list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) { | 
|  | ++entries; | 
|  | if (time_after(jiffies, p->exp_time) || | 
|  | (entries == RMC_QUEUE_MAX_LEN)) { | 
|  | list_del(&p->list); | 
|  | kmem_cache_free(rm_cache, p); | 
|  | --entries; | 
|  | } else if ((seqnum == p->seqnum) && | 
|  | (compare_ether_addr(sa, p->sa) == 0)) | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | p = kmem_cache_alloc(rm_cache, GFP_ATOMIC); | 
|  | if (!p) | 
|  | return 0; | 
|  |  | 
|  | p->seqnum = seqnum; | 
|  | p->exp_time = jiffies + RMC_TIMEOUT; | 
|  | memcpy(p->sa, sa, ETH_ALEN); | 
|  | list_add(&p->list, &rmc->bucket[idx].list); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int | 
|  | mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u8 *pos, neighbors; | 
|  | u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie); | 
|  |  | 
|  | if (skb_tailroom(skb) < 2 + meshconf_len) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pos = skb_put(skb, 2 + meshconf_len); | 
|  | *pos++ = WLAN_EID_MESH_CONFIG; | 
|  | *pos++ = meshconf_len; | 
|  |  | 
|  | /* Active path selection protocol ID */ | 
|  | *pos++ = ifmsh->mesh_pp_id; | 
|  | /* Active path selection metric ID   */ | 
|  | *pos++ = ifmsh->mesh_pm_id; | 
|  | /* Congestion control mode identifier */ | 
|  | *pos++ = ifmsh->mesh_cc_id; | 
|  | /* Synchronization protocol identifier */ | 
|  | *pos++ = ifmsh->mesh_sp_id; | 
|  | /* Authentication Protocol identifier */ | 
|  | *pos++ = ifmsh->mesh_auth_id; | 
|  | /* Mesh Formation Info - number of neighbors */ | 
|  | neighbors = atomic_read(&ifmsh->mshstats.estab_plinks); | 
|  | /* Number of neighbor mesh STAs or 15 whichever is smaller */ | 
|  | neighbors = (neighbors > 15) ? 15 : neighbors; | 
|  | *pos++ = neighbors << 1; | 
|  | /* Mesh capability */ | 
|  | ifmsh->accepting_plinks = mesh_plink_availables(sdata); | 
|  | *pos = MESHCONF_CAPAB_FORWARDING; | 
|  | *pos++ |= ifmsh->accepting_plinks ? | 
|  | MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; | 
|  | *pos++ = 0x00; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int | 
|  | mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u8 *pos; | 
|  |  | 
|  | if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pos = skb_put(skb, 2 + ifmsh->mesh_id_len); | 
|  | *pos++ = WLAN_EID_MESH_ID; | 
|  | *pos++ = ifmsh->mesh_id_len; | 
|  | if (ifmsh->mesh_id_len) | 
|  | memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int | 
|  | mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u8 offset, len; | 
|  | const u8 *data; | 
|  |  | 
|  | if (!ifmsh->ie || !ifmsh->ie_len) | 
|  | return 0; | 
|  |  | 
|  | /* fast-forward to vendor IEs */ | 
|  | offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0); | 
|  |  | 
|  | if (offset) { | 
|  | len = ifmsh->ie_len - offset; | 
|  | data = ifmsh->ie + offset; | 
|  | if (skb_tailroom(skb) < len) | 
|  | return -ENOMEM; | 
|  | memcpy(skb_put(skb, len), data, len); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int | 
|  | mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u8 len = 0; | 
|  | const u8 *data; | 
|  |  | 
|  | if (!ifmsh->ie || !ifmsh->ie_len) | 
|  | return 0; | 
|  |  | 
|  | /* find RSN IE */ | 
|  | data = ifmsh->ie; | 
|  | while (data < ifmsh->ie + ifmsh->ie_len) { | 
|  | if (*data == WLAN_EID_RSN) { | 
|  | len = data[1] + 2; | 
|  | break; | 
|  | } | 
|  | data++; | 
|  | } | 
|  |  | 
|  | if (len) { | 
|  | if (skb_tailroom(skb) < len) | 
|  | return -ENOMEM; | 
|  | memcpy(skb_put(skb, len), data, len); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int mesh_add_ds_params_ie(struct sk_buff *skb, | 
|  | struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_supported_band *sband; | 
|  | u8 *pos; | 
|  |  | 
|  | if (skb_tailroom(skb) < 3) | 
|  | return -ENOMEM; | 
|  |  | 
|  | sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; | 
|  | if (sband->band == IEEE80211_BAND_2GHZ) { | 
|  | pos = skb_put(skb, 2 + 1); | 
|  | *pos++ = WLAN_EID_DS_PARAMS; | 
|  | *pos++ = 1; | 
|  | *pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int mesh_add_ht_cap_ie(struct sk_buff *skb, | 
|  | struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_supported_band *sband; | 
|  | u8 *pos; | 
|  |  | 
|  | sband = local->hw.wiphy->bands[local->oper_channel->band]; | 
|  | if (!sband->ht_cap.ht_supported || | 
|  | local->_oper_channel_type == NL80211_CHAN_NO_HT) | 
|  | return 0; | 
|  |  | 
|  | if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap)); | 
|  | ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int mesh_add_ht_info_ie(struct sk_buff *skb, | 
|  | struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_channel *channel = local->oper_channel; | 
|  | enum nl80211_channel_type channel_type = local->_oper_channel_type; | 
|  | struct ieee80211_supported_band *sband = | 
|  | local->hw.wiphy->bands[channel->band]; | 
|  | struct ieee80211_sta_ht_cap *ht_cap = &sband->ht_cap; | 
|  | u8 *pos; | 
|  |  | 
|  | if (!ht_cap->ht_supported || channel_type == NL80211_CHAN_NO_HT) | 
|  | return 0; | 
|  |  | 
|  | if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_info)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_info)); | 
|  | ieee80211_ie_build_ht_info(pos, ht_cap, channel, channel_type); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | static void ieee80211_mesh_path_timer(unsigned long data) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | (struct ieee80211_sub_if_data *) data; | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | if (local->quiescing) { | 
|  | set_bit(TMR_RUNNING_MP, &ifmsh->timers_running); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ieee80211_queue_work(&local->hw, &sdata->work); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_path_root_timer(unsigned long data) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | (struct ieee80211_sub_if_data *) data; | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | 
|  |  | 
|  | if (local->quiescing) { | 
|  | set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ieee80211_queue_work(&local->hw, &sdata->work); | 
|  | } | 
|  |  | 
|  | void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh) | 
|  | { | 
|  | if (ifmsh->mshcfg.dot11MeshHWMPRootMode) | 
|  | set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | 
|  | else { | 
|  | clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | 
|  | /* stop running timer */ | 
|  | del_timer_sync(&ifmsh->mesh_path_root_timer); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame | 
|  | * @hdr:    	802.11 frame header | 
|  | * @fc:		frame control field | 
|  | * @meshda:	destination address in the mesh | 
|  | * @meshsa:	source address address in the mesh.  Same as TA, as frame is | 
|  | *              locally originated. | 
|  | * | 
|  | * Return the length of the 802.11 (does not include a mesh control header) | 
|  | */ | 
|  | int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, | 
|  | const u8 *meshda, const u8 *meshsa) | 
|  | { | 
|  | if (is_multicast_ether_addr(meshda)) { | 
|  | *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | 
|  | /* DA TA SA */ | 
|  | memcpy(hdr->addr1, meshda, ETH_ALEN); | 
|  | memcpy(hdr->addr2, meshsa, ETH_ALEN); | 
|  | memcpy(hdr->addr3, meshsa, ETH_ALEN); | 
|  | return 24; | 
|  | } else { | 
|  | *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | 
|  | /* RA TA DA SA */ | 
|  | memset(hdr->addr1, 0, ETH_ALEN);   /* RA is resolved later */ | 
|  | memcpy(hdr->addr2, meshsa, ETH_ALEN); | 
|  | memcpy(hdr->addr3, meshda, ETH_ALEN); | 
|  | memcpy(hdr->addr4, meshsa, ETH_ALEN); | 
|  | return 30; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ieee80211_new_mesh_header - create a new mesh header | 
|  | * @meshhdr:    uninitialized mesh header | 
|  | * @sdata:	mesh interface to be used | 
|  | * @addr4or5:   1st address in the ae header, which may correspond to address 4 | 
|  | *              (if addr6 is NULL) or address 5 (if addr6 is present). It may | 
|  | *              be NULL. | 
|  | * @addr6:	2nd address in the ae header, which corresponds to addr6 of the | 
|  | *              mesh frame | 
|  | * | 
|  | * Return the header length. | 
|  | */ | 
|  | int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr, | 
|  | struct ieee80211_sub_if_data *sdata, char *addr4or5, | 
|  | char *addr6) | 
|  | { | 
|  | int aelen = 0; | 
|  | BUG_ON(!addr4or5 && addr6); | 
|  | memset(meshhdr, 0, sizeof(*meshhdr)); | 
|  | meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; | 
|  | put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum); | 
|  | sdata->u.mesh.mesh_seqnum++; | 
|  | if (addr4or5 && !addr6) { | 
|  | meshhdr->flags |= MESH_FLAGS_AE_A4; | 
|  | aelen += ETH_ALEN; | 
|  | memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); | 
|  | } else if (addr4or5 && addr6) { | 
|  | meshhdr->flags |= MESH_FLAGS_AE_A5_A6; | 
|  | aelen += 2 * ETH_ALEN; | 
|  | memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); | 
|  | memcpy(meshhdr->eaddr2, addr6, ETH_ALEN); | 
|  | } | 
|  | return 6 + aelen; | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_if_mesh *ifmsh) | 
|  | { | 
|  | bool free_plinks; | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | printk(KERN_DEBUG "%s: running mesh housekeeping\n", | 
|  | sdata->name); | 
|  | #endif | 
|  |  | 
|  | ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT); | 
|  | mesh_path_expire(sdata); | 
|  |  | 
|  | free_plinks = mesh_plink_availables(sdata); | 
|  | if (free_plinks != sdata->u.mesh.accepting_plinks) | 
|  | ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); | 
|  |  | 
|  | mod_timer(&ifmsh->housekeeping_timer, | 
|  | round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | mesh_path_tx_root_frame(sdata); | 
|  | mod_timer(&ifmsh->mesh_path_root_timer, | 
|  | round_jiffies(TU_TO_EXP_TIME( | 
|  | ifmsh->mshcfg.dot11MeshHWMPRannInterval))); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | /* use atomic bitops in case all timers fire at the same time */ | 
|  |  | 
|  | if (del_timer_sync(&ifmsh->housekeeping_timer)) | 
|  | set_bit(TMR_RUNNING_HK, &ifmsh->timers_running); | 
|  | if (del_timer_sync(&ifmsh->mesh_path_timer)) | 
|  | set_bit(TMR_RUNNING_MP, &ifmsh->timers_running); | 
|  | if (del_timer_sync(&ifmsh->mesh_path_root_timer)) | 
|  | set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running); | 
|  | } | 
|  |  | 
|  | void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | if (test_and_clear_bit(TMR_RUNNING_HK, &ifmsh->timers_running)) | 
|  | add_timer(&ifmsh->housekeeping_timer); | 
|  | if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running)) | 
|  | add_timer(&ifmsh->mesh_path_timer); | 
|  | if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running)) | 
|  | add_timer(&ifmsh->mesh_path_root_timer); | 
|  | ieee80211_mesh_root_setup(ifmsh); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | local->fif_other_bss++; | 
|  | /* mesh ifaces must set allmulti to forward mcast traffic */ | 
|  | atomic_inc(&local->iff_allmultis); | 
|  | ieee80211_configure_filter(local); | 
|  |  | 
|  | ifmsh->mesh_cc_id = 0;	/* Disabled */ | 
|  | ifmsh->mesh_sp_id = 0;	/* Neighbor Offset */ | 
|  | ifmsh->mesh_auth_id = 0;	/* Disabled */ | 
|  | set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); | 
|  | ieee80211_mesh_root_setup(ifmsh); | 
|  | ieee80211_queue_work(&local->hw, &sdata->work); | 
|  | sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL; | 
|  | ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON | | 
|  | BSS_CHANGED_BEACON_ENABLED | | 
|  | BSS_CHANGED_BEACON_INT); | 
|  | } | 
|  |  | 
|  | void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | ifmsh->mesh_id_len = 0; | 
|  | ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); | 
|  | sta_info_flush(local, NULL); | 
|  |  | 
|  | del_timer_sync(&sdata->u.mesh.housekeeping_timer); | 
|  | del_timer_sync(&sdata->u.mesh.mesh_path_root_timer); | 
|  | /* | 
|  | * If the timer fired while we waited for it, it will have | 
|  | * requeued the work. Now the work will be running again | 
|  | * but will not rearm the timer again because it checks | 
|  | * whether the interface is running, which, at this point, | 
|  | * it no longer is. | 
|  | */ | 
|  | cancel_work_sync(&sdata->work); | 
|  |  | 
|  | local->fif_other_bss--; | 
|  | atomic_dec(&local->iff_allmultis); | 
|  | ieee80211_configure_filter(local); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, | 
|  | u16 stype, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len, | 
|  | struct ieee80211_rx_status *rx_status) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee802_11_elems elems; | 
|  | struct ieee80211_channel *channel; | 
|  | u32 supp_rates = 0; | 
|  | size_t baselen; | 
|  | int freq; | 
|  | enum ieee80211_band band = rx_status->band; | 
|  |  | 
|  | /* ignore ProbeResp to foreign address */ | 
|  | if (stype == IEEE80211_STYPE_PROBE_RESP && | 
|  | compare_ether_addr(mgmt->da, sdata->vif.addr)) | 
|  | return; | 
|  |  | 
|  | baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; | 
|  | if (baselen > len) | 
|  | return; | 
|  |  | 
|  | ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, | 
|  | &elems); | 
|  |  | 
|  | /* ignore beacons from secure mesh peers if our security is off */ | 
|  | if (elems.rsn_len && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) | 
|  | return; | 
|  |  | 
|  | if (elems.ds_params && elems.ds_params_len == 1) | 
|  | freq = ieee80211_channel_to_frequency(elems.ds_params[0], band); | 
|  | else | 
|  | freq = rx_status->freq; | 
|  |  | 
|  | channel = ieee80211_get_channel(local->hw.wiphy, freq); | 
|  |  | 
|  | if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) | 
|  | return; | 
|  |  | 
|  | if (elems.mesh_id && elems.mesh_config && | 
|  | mesh_matches_local(&elems, sdata)) { | 
|  | supp_rates = ieee80211_sta_get_rates(local, &elems, band); | 
|  | mesh_neighbour_update(mgmt->sa, supp_rates, sdata, &elems); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len, | 
|  | struct ieee80211_rx_status *rx_status) | 
|  | { | 
|  | switch (mgmt->u.action.category) { | 
|  | case WLAN_CATEGORY_SELF_PROTECTED: | 
|  | switch (mgmt->u.action.u.self_prot.action_code) { | 
|  | case WLAN_SP_MESH_PEERING_OPEN: | 
|  | case WLAN_SP_MESH_PEERING_CLOSE: | 
|  | case WLAN_SP_MESH_PEERING_CONFIRM: | 
|  | mesh_rx_plink_frame(sdata, mgmt, len, rx_status); | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case WLAN_CATEGORY_MESH_ACTION: | 
|  | if (mesh_action_is_path_sel(mgmt)) | 
|  | mesh_rx_path_sel_frame(sdata, mgmt, len); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_rx_status *rx_status; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | u16 stype; | 
|  |  | 
|  | rx_status = IEEE80211_SKB_RXCB(skb); | 
|  | mgmt = (struct ieee80211_mgmt *) skb->data; | 
|  | stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE; | 
|  |  | 
|  | switch (stype) { | 
|  | case IEEE80211_STYPE_PROBE_RESP: | 
|  | case IEEE80211_STYPE_BEACON: | 
|  | ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len, | 
|  | rx_status); | 
|  | break; | 
|  | case IEEE80211_STYPE_ACTION: | 
|  | ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | if (ifmsh->preq_queue_len && | 
|  | time_after(jiffies, | 
|  | ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval))) | 
|  | mesh_path_start_discovery(sdata); | 
|  |  | 
|  | if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags)) | 
|  | mesh_mpath_table_grow(); | 
|  |  | 
|  | if (test_and_clear_bit(MESH_WORK_GROW_MPP_TABLE, &ifmsh->wrkq_flags)) | 
|  | mesh_mpp_table_grow(); | 
|  |  | 
|  | if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags)) | 
|  | ieee80211_mesh_housekeeping(sdata, ifmsh); | 
|  |  | 
|  | if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags)) | 
|  | ieee80211_mesh_rootpath(sdata); | 
|  | } | 
|  |  | 
|  | void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(sdata, &local->interfaces, list) | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | ieee80211_queue_work(&local->hw, &sdata->work); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | setup_timer(&ifmsh->housekeeping_timer, | 
|  | ieee80211_mesh_housekeeping_timer, | 
|  | (unsigned long) sdata); | 
|  |  | 
|  | ifmsh->accepting_plinks = true; | 
|  | ifmsh->preq_id = 0; | 
|  | ifmsh->sn = 0; | 
|  | ifmsh->num_gates = 0; | 
|  | atomic_set(&ifmsh->mpaths, 0); | 
|  | mesh_rmc_init(sdata); | 
|  | ifmsh->last_preq = jiffies; | 
|  | ifmsh->next_perr = jiffies; | 
|  | /* Allocate all mesh structures when creating the first mesh interface. */ | 
|  | if (!mesh_allocated) | 
|  | ieee80211s_init(); | 
|  | setup_timer(&ifmsh->mesh_path_timer, | 
|  | ieee80211_mesh_path_timer, | 
|  | (unsigned long) sdata); | 
|  | setup_timer(&ifmsh->mesh_path_root_timer, | 
|  | ieee80211_mesh_path_root_timer, | 
|  | (unsigned long) sdata); | 
|  | INIT_LIST_HEAD(&ifmsh->preq_queue.list); | 
|  | spin_lock_init(&ifmsh->mesh_preq_queue_lock); | 
|  | } |