V4L/DVB (7914): Anysee: driver for Anysee DVB-T/C receiver
- driver for Anysee DVB-T/C receiver
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
new file mode 100644
index 0000000..48da394
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -0,0 +1,304 @@
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This
+ * module registers serial interface that can be used to comminicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#ifndef _DVB_USB_ANYSEE_H_
+#define _DVB_USB_ANYSEE_H_
+
+#define DVB_USB_LOG_PREFIX "anysee"
+#include "dvb-usb.h"
+
+#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args)
+#define deb_rc(args...) dprintk(dvb_usb_anysee_debug, 0x04, args)
+#define deb_reg(args...) dprintk(dvb_usb_anysee_debug, 0x08, args)
+#define deb_i2c(args...) dprintk(dvb_usb_anysee_debug, 0x10, args)
+#define deb_fw(args...) dprintk(dvb_usb_anysee_debug, 0x20, args)
+
+enum cmd {
+ CMD_I2C_READ = 0x33,
+ CMD_I2C_WRITE = 0x31,
+ CMD_REG_READ = 0xb0,
+ CMD_REG_WRITE = 0xb1,
+ CMD_STREAMING_CTRL = 0x12,
+ CMD_LED_AND_IR_CTRL = 0x16,
+ CMD_GET_IR_CODE = 0x41,
+ CMD_GET_HW_INFO = 0x19,
+ CMD_SMARTCARD = 0x34,
+};
+
+struct anysee_state {
+ u8 tuner;
+ u8 seq;
+};
+
+#endif
+
+/***************************************************************************
+ * USB API description (reverse engineered)
+ ***************************************************************************
+
+Transaction flow:
+=================
+BULK[00001] >>> REQUEST PACKET 64 bytes
+BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY)
+BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY)
+
+General reply packet(s) are always used if not own reply defined.
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY)
+============================================================================
+| 00 | reply data (if any) from previous transaction
+| | Just same reply packet as returned during previous transaction.
+| | Needed only if reply is missed in previous transaction.
+| | Just skip normally.
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY)
+============================================================================
+| 00 | reply data (if any)
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C WRITE REQUEST PACKET
+============================================================================
+| 00 | 0x31 I2C write command
+----------------------------------------------------------------------------
+| 01 | i2c address
+----------------------------------------------------------------------------
+| 02 | data length
+| | 0x02 (for typical I2C reg / val pair)
+----------------------------------------------------------------------------
+| 03 | 0x01
+----------------------------------------------------------------------------
+| 04- | data
+----------------------------------------------------------------------------
+| -59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C READ REQUEST PACKET
+============================================================================
+| 00 | 0x33 I2C read command
+----------------------------------------------------------------------------
+| 01 | i2c address + 1
+----------------------------------------------------------------------------
+| 02 | register
+----------------------------------------------------------------------------
+| 03 | 0x00
+----------------------------------------------------------------------------
+| 04 | 0x00
+----------------------------------------------------------------------------
+| 05 | 0x01
+----------------------------------------------------------------------------
+| 06-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET
+============================================================================
+| 00 | 0xb1 register write command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+| 03 | 0x01
+----------------------------------------------------------------------------
+| 04 | value
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET
+============================================================================
+| 00 | 0xb0 register read command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+| 03 | 0x01
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | LED CONTROL REQUEST PACKET
+============================================================================
+| 00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+| 01 | 0x01 (LED)
+----------------------------------------------------------------------------
+| 03 | 0x00 blink
+| | 0x01 lights continuously
+----------------------------------------------------------------------------
+| 04 | blink interval
+| | 0x00 fastest (looks like LED lights continuously)
+| | 0xff slowest
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | IR CONTROL REQUEST PACKET
+============================================================================
+| 00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+| 01 | 0x02 (IR)
+----------------------------------------------------------------------------
+| 03 | 0x00 IR disabled
+| | 0x01 IR enabled
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | STREAMING CONTROL REQUEST PACKET
+============================================================================
+| 00 | 0x12 streaming control command
+----------------------------------------------------------------------------
+| 01 | 0x00 streaming disabled
+| | 0x01 streaming enabled
+----------------------------------------------------------------------------
+| 02 | 0x00
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REQUEST PACKET
+============================================================================
+| 00 | 0x41 remote control command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REPLY PACKET
+============================================================================
+| 00 | 0x00 code not received
+| | 0x01 code received
+----------------------------------------------------------------------------
+| 01 | remote control code
+----------------------------------------------------------------------------
+| 02-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REQUEST PACKET
+============================================================================
+| 00 | 0x19 get hardware info command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REPLY PACKET
+============================================================================
+| 00 | hardware id
+----------------------------------------------------------------------------
+| 01-02 | firmware version
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | SMART CARD READER PACKET
+============================================================================
+| 00 | 0x34 smart card reader command
+----------------------------------------------------------------------------
+| xx |
+----------------------------------------------------------------------------
+| xx-59 | don't care
+----------------------------------------------------------------------------
+| 60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+*/