tty: Introduce some close helpers for ports
Again this is a lot of common code we can unify
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 4c69ab9..5c3dc6b 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -767,7 +767,7 @@
break;
}
if (i == ARRAY_SIZE(stli_brdstr)) {
- printk("STALLION: unknown board name, %s?\n", argp[0]);
+ printk(KERN_WARNING "istallion: unknown board name, %s?\n", argp[0]);
return 0;
}
@@ -855,21 +855,8 @@
return;
port = &portp->port;
- spin_lock_irqsave(&port->lock, flags);
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&port->lock, flags);
+ if (tty_port_close_start(port, tty, filp) == 0)
return;
- }
- if (tty->count == 1 && port->count != 1)
- port->count = 1;
- if (port->count-- > 1) {
- spin_unlock_irqrestore(&port->lock, flags);
- return;
- }
-
- port->flags |= ASYNC_CLOSING;
- tty->closing = 1;
- spin_unlock_irqrestore(&port->lock, flags);
/*
* May want to wait for data to drain before closing. The BUSY flag
@@ -882,6 +869,8 @@
stli_flushchars(tty);
spin_unlock_irqrestore(&stli_lock, flags);
+ /* We end up doing this twice for the moment. This needs looking at
+ eventually. Note we still use portp->closing_wait as a result */
if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, portp->closing_wait);
@@ -905,17 +894,8 @@
set_bit(ST_DOFLUSHRX, &portp->state);
stli_flushbuffer(tty);
- tty->closing = 0;
- tty_port_tty_set(&portp->port, NULL);
-
- if (port->blocked_open) {
- if (portp->close_delay)
- msleep_interruptible(jiffies_to_msecs(portp->close_delay));
- wake_up_interruptible(&port->open_wait);
- }
-
- port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&port->close_wait);
+ tty_port_close_end(port, tty);
+ tty_port_tty_set(port, NULL);
}
/*****************************************************************************/
@@ -1482,7 +1462,7 @@
sio.irq = 0;
sio.flags = portp->port.flags;
sio.baud_base = portp->baud_base;
- sio.close_delay = portp->close_delay;
+ sio.close_delay = portp->port.close_delay;
sio.closing_wait = portp->closing_wait;
sio.custom_divisor = portp->custom_divisor;
sio.xmit_fifo_size = 0;
@@ -1514,7 +1494,7 @@
return -EFAULT;
if (!capable(CAP_SYS_ADMIN)) {
if ((sio.baud_base != portp->baud_base) ||
- (sio.close_delay != portp->close_delay) ||
+ (sio.close_delay != portp->port.close_delay) ||
((sio.flags & ~ASYNC_USR_MASK) !=
(portp->port.flags & ~ASYNC_USR_MASK)))
return -EPERM;
@@ -1523,7 +1503,7 @@
portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
(sio.flags & ASYNC_USR_MASK);
portp->baud_base = sio.baud_base;
- portp->close_delay = sio.close_delay;
+ portp->port.close_delay = sio.close_delay;
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
@@ -2065,7 +2045,7 @@
unsigned char __iomem *bits;
if (test_bit(ST_CMDING, &portp->state)) {
- printk(KERN_ERR "STALLION: command already busy, cmd=%x!\n",
+ printk(KERN_ERR "istallion: command already busy, cmd=%x!\n",
(int) cmd);
return;
}
@@ -2625,7 +2605,7 @@
for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
portp = kzalloc(sizeof(struct stliport), GFP_KERNEL);
if (!portp) {
- printk("STALLION: failed to allocate port structure\n");
+ printk(KERN_WARNING "istallion: failed to allocate port structure\n");
continue;
}
tty_port_init(&portp->port);
@@ -2635,7 +2615,7 @@
portp->brdnr = brdp->brdnr;
portp->panelnr = panelnr;
portp->baud_base = STL_BAUDBASE;
- portp->close_delay = STL_CLOSEDELAY;
+ portp->port.close_delay = STL_CLOSEDELAY;
portp->closing_wait = 30 * HZ;
init_waitqueue_head(&portp->port.open_wait);
init_waitqueue_head(&portp->port.close_wait);
@@ -2692,7 +2672,7 @@
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
@@ -2766,7 +2746,7 @@
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
@@ -2818,7 +2798,7 @@
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
@@ -2863,7 +2843,7 @@
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), board=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
@@ -2928,7 +2908,7 @@
void __iomem *ptr;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
@@ -2994,7 +2974,7 @@
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
@@ -3433,7 +3413,7 @@
#endif
if (nrdevs < (brdp->nrports + 1)) {
- printk(KERN_ERR "STALLION: slave failed to allocate memory for "
+ printk(KERN_ERR "istallion: slave failed to allocate memory for "
"all devices, devices=%d\n", nrdevs);
brdp->nrports = nrdevs - 1;
}
@@ -3443,13 +3423,13 @@
brdp->bitsize = (nrdevs + 7) / 8;
memoff = readl(&hdrp->memp);
if (memoff > brdp->memsize) {
- printk(KERN_ERR "STALLION: corrupted shared memory region?\n");
+ printk(KERN_ERR "istallion: corrupted shared memory region?\n");
rc = -EIO;
goto stli_donestartup;
}
memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff);
if (readw(&memp->dtype) != TYP_ASYNCTRL) {
- printk(KERN_ERR "STALLION: no slave control device found\n");
+ printk(KERN_ERR "istallion: no slave control device found\n");
goto stli_donestartup;
}
memp++;
@@ -3534,7 +3514,7 @@
retval = stli_initonb(brdp);
break;
default:
- printk(KERN_ERR "STALLION: board=%d is unknown board "
+ printk(KERN_ERR "istallion: board=%d is unknown board "
"type=%d\n", brdp->brdnr, brdp->brdtype);
retval = -ENODEV;
}
@@ -3543,7 +3523,7 @@
return retval;
stli_initports(brdp);
- printk(KERN_INFO "STALLION: %s found, board=%d io=%x mem=%x "
+ printk(KERN_INFO "istallion: %s found, board=%d io=%x mem=%x "
"nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype],
brdp->brdnr, brdp->iobase, (int) brdp->memaddr,
brdp->nrpanels, brdp->nrports);
@@ -3637,7 +3617,7 @@
if (! foundit) {
brdp->memaddr = 0;
brdp->membase = NULL;
- printk(KERN_ERR "STALLION: failed to probe shared memory "
+ printk(KERN_ERR "istallion: failed to probe shared memory "
"region for %s in EISA slot=%d\n",
stli_brdnames[brdp->brdtype], (brdp->iobase >> 12));
return -ENODEV;
@@ -3782,7 +3762,7 @@
mutex_lock(&stli_brdslock);
brdnr = stli_getbrdnr();
if (brdnr < 0) {
- printk(KERN_INFO "STALLION: too many boards found, "
+ printk(KERN_INFO "istallion: too many boards found, "
"maximum supported %d\n", STL_MAXBRDS);
mutex_unlock(&stli_brdslock);
retval = -EIO;
@@ -3854,7 +3834,7 @@
brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL);
if (!brdp) {
- printk(KERN_ERR "STALLION: failed to allocate memory "
+ printk(KERN_ERR "istallion: failed to allocate memory "
"(size=%Zd)\n", sizeof(struct stlibrd));
return NULL;
}
@@ -4493,7 +4473,7 @@
stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
if (!stli_txcookbuf) {
- printk(KERN_ERR "STALLION: failed to allocate memory "
+ printk(KERN_ERR "istallion: failed to allocate memory "
"(size=%d)\n", STLI_TXBUFSIZE);
retval = -ENOMEM;
goto err;
@@ -4518,7 +4498,7 @@
retval = tty_register_driver(stli_serial);
if (retval) {
- printk(KERN_ERR "STALLION: failed to register serial driver\n");
+ printk(KERN_ERR "istallion: failed to register serial driver\n");
goto err_ttyput;
}
@@ -4532,7 +4512,7 @@
*/
retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem);
if (retval) {
- printk(KERN_ERR "STALLION: failed to register serial memory "
+ printk(KERN_ERR "istallion: failed to register serial memory "
"device\n");
goto err_deinit;
}