| /* | 
 |  * FSL SoC setup code | 
 |  * | 
 |  * Maintained by Kumar Gala (see MAINTAINERS for contact information) | 
 |  * | 
 |  * 2006 (c) MontaVista Software, Inc. | 
 |  * Vitaly Bordug <vbordug@ru.mvista.com> | 
 |  * | 
 |  * This program is free software; you can redistribute  it and/or modify it | 
 |  * under  the terms of  the GNU General  Public License as published by the | 
 |  * Free Software Foundation;  either version 2 of the  License, or (at your | 
 |  * option) any later version. | 
 |  */ | 
 |  | 
 | #include <linux/stddef.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/major.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/module.h> | 
 | #include <linux/device.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_platform.h> | 
 | #include <linux/phy.h> | 
 | #include <linux/phy_fixed.h> | 
 | #include <linux/spi/spi.h> | 
 | #include <linux/fsl_devices.h> | 
 | #include <linux/fs_enet_pd.h> | 
 | #include <linux/fs_uart_pd.h> | 
 |  | 
 | #include <asm/system.h> | 
 | #include <asm/atomic.h> | 
 | #include <asm/io.h> | 
 | #include <asm/irq.h> | 
 | #include <asm/time.h> | 
 | #include <asm/prom.h> | 
 | #include <asm/machdep.h> | 
 | #include <sysdev/fsl_soc.h> | 
 | #include <mm/mmu_decl.h> | 
 | #include <asm/cpm2.h> | 
 |  | 
 | extern void init_fcc_ioports(struct fs_platform_info*); | 
 | extern void init_fec_ioports(struct fs_platform_info*); | 
 | extern void init_smc_ioports(struct fs_uart_platform_info*); | 
 | static phys_addr_t immrbase = -1; | 
 |  | 
 | phys_addr_t get_immrbase(void) | 
 | { | 
 | 	struct device_node *soc; | 
 |  | 
 | 	if (immrbase != -1) | 
 | 		return immrbase; | 
 |  | 
 | 	soc = of_find_node_by_type(NULL, "soc"); | 
 | 	if (soc) { | 
 | 		int size; | 
 | 		u32 naddr; | 
 | 		const u32 *prop = of_get_property(soc, "#address-cells", &size); | 
 |  | 
 | 		if (prop && size == 4) | 
 | 			naddr = *prop; | 
 | 		else | 
 | 			naddr = 2; | 
 |  | 
 | 		prop = of_get_property(soc, "ranges", &size); | 
 | 		if (prop) | 
 | 			immrbase = of_translate_address(soc, prop + naddr); | 
 |  | 
 | 		of_node_put(soc); | 
 | 	} | 
 |  | 
 | 	return immrbase; | 
 | } | 
 |  | 
 | EXPORT_SYMBOL(get_immrbase); | 
 |  | 
 | static u32 sysfreq = -1; | 
 |  | 
 | u32 fsl_get_sys_freq(void) | 
 | { | 
 | 	struct device_node *soc; | 
 | 	const u32 *prop; | 
 | 	int size; | 
 |  | 
 | 	if (sysfreq != -1) | 
 | 		return sysfreq; | 
 |  | 
 | 	soc = of_find_node_by_type(NULL, "soc"); | 
 | 	if (!soc) | 
 | 		return -1; | 
 |  | 
 | 	prop = of_get_property(soc, "clock-frequency", &size); | 
 | 	if (!prop || size != sizeof(*prop) || *prop == 0) | 
 | 		prop = of_get_property(soc, "bus-frequency", &size); | 
 |  | 
 | 	if (prop && size == sizeof(*prop)) | 
 | 		sysfreq = *prop; | 
 |  | 
 | 	of_node_put(soc); | 
 | 	return sysfreq; | 
 | } | 
 | EXPORT_SYMBOL(fsl_get_sys_freq); | 
 |  | 
 | #if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx) | 
 |  | 
 | static u32 brgfreq = -1; | 
 |  | 
 | u32 get_brgfreq(void) | 
 | { | 
 | 	struct device_node *node; | 
 | 	const unsigned int *prop; | 
 | 	int size; | 
 |  | 
 | 	if (brgfreq != -1) | 
 | 		return brgfreq; | 
 |  | 
 | 	node = of_find_compatible_node(NULL, NULL, "fsl,cpm-brg"); | 
 | 	if (node) { | 
 | 		prop = of_get_property(node, "clock-frequency", &size); | 
 | 		if (prop && size == 4) | 
 | 			brgfreq = *prop; | 
 |  | 
 | 		of_node_put(node); | 
 | 		return brgfreq; | 
 | 	} | 
 |  | 
 | 	/* Legacy device binding -- will go away when no users are left. */ | 
 | 	node = of_find_node_by_type(NULL, "cpm"); | 
 | 	if (!node) | 
 | 		node = of_find_compatible_node(NULL, NULL, "fsl,qe"); | 
 | 	if (!node) | 
 | 		node = of_find_node_by_type(NULL, "qe"); | 
 |  | 
 | 	if (node) { | 
 | 		prop = of_get_property(node, "brg-frequency", &size); | 
 | 		if (prop && size == 4) | 
 | 			brgfreq = *prop; | 
 |  | 
 | 		if (brgfreq == -1 || brgfreq == 0) { | 
 | 			prop = of_get_property(node, "bus-frequency", &size); | 
 | 			if (prop && size == 4) | 
 | 				brgfreq = *prop / 2; | 
 | 		} | 
 | 		of_node_put(node); | 
 | 	} | 
 |  | 
 | 	return brgfreq; | 
 | } | 
 |  | 
 | EXPORT_SYMBOL(get_brgfreq); | 
 |  | 
 | static u32 fs_baudrate = -1; | 
 |  | 
 | u32 get_baudrate(void) | 
 | { | 
 | 	struct device_node *node; | 
 |  | 
 | 	if (fs_baudrate != -1) | 
 | 		return fs_baudrate; | 
 |  | 
 | 	node = of_find_node_by_type(NULL, "serial"); | 
 | 	if (node) { | 
 | 		int size; | 
 | 		const unsigned int *prop = of_get_property(node, | 
 | 				"current-speed", &size); | 
 |  | 
 | 		if (prop) | 
 | 			fs_baudrate = *prop; | 
 | 		of_node_put(node); | 
 | 	} | 
 |  | 
 | 	return fs_baudrate; | 
 | } | 
 |  | 
 | EXPORT_SYMBOL(get_baudrate); | 
 | #endif /* CONFIG_CPM2 */ | 
 |  | 
 | #ifdef CONFIG_FIXED_PHY | 
 | static int __init of_add_fixed_phys(void) | 
 | { | 
 | 	int ret; | 
 | 	struct device_node *np; | 
 | 	u32 *fixed_link; | 
 | 	struct fixed_phy_status status = {}; | 
 |  | 
 | 	for_each_node_by_name(np, "ethernet") { | 
 | 		fixed_link  = (u32 *)of_get_property(np, "fixed-link", NULL); | 
 | 		if (!fixed_link) | 
 | 			continue; | 
 |  | 
 | 		status.link = 1; | 
 | 		status.duplex = fixed_link[1]; | 
 | 		status.speed = fixed_link[2]; | 
 | 		status.pause = fixed_link[3]; | 
 | 		status.asym_pause = fixed_link[4]; | 
 |  | 
 | 		ret = fixed_phy_add(PHY_POLL, fixed_link[0], &status); | 
 | 		if (ret) { | 
 | 			of_node_put(np); | 
 | 			return ret; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 | arch_initcall(of_add_fixed_phys); | 
 | #endif /* CONFIG_FIXED_PHY */ | 
 |  | 
 | static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type) | 
 | { | 
 | 	if (!phy_type) | 
 | 		return FSL_USB2_PHY_NONE; | 
 | 	if (!strcasecmp(phy_type, "ulpi")) | 
 | 		return FSL_USB2_PHY_ULPI; | 
 | 	if (!strcasecmp(phy_type, "utmi")) | 
 | 		return FSL_USB2_PHY_UTMI; | 
 | 	if (!strcasecmp(phy_type, "utmi_wide")) | 
 | 		return FSL_USB2_PHY_UTMI_WIDE; | 
 | 	if (!strcasecmp(phy_type, "serial")) | 
 | 		return FSL_USB2_PHY_SERIAL; | 
 |  | 
 | 	return FSL_USB2_PHY_NONE; | 
 | } | 
 |  | 
 | static int __init fsl_usb_of_init(void) | 
 | { | 
 | 	struct device_node *np; | 
 | 	unsigned int i = 0; | 
 | 	struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL, | 
 | 		*usb_dev_dr_client = NULL; | 
 | 	int ret; | 
 |  | 
 | 	for_each_compatible_node(np, NULL, "fsl-usb2-mph") { | 
 | 		struct resource r[2]; | 
 | 		struct fsl_usb2_platform_data usb_data; | 
 | 		const unsigned char *prop = NULL; | 
 |  | 
 | 		memset(&r, 0, sizeof(r)); | 
 | 		memset(&usb_data, 0, sizeof(usb_data)); | 
 |  | 
 | 		ret = of_address_to_resource(np, 0, &r[0]); | 
 | 		if (ret) | 
 | 			goto err; | 
 |  | 
 | 		of_irq_to_resource(np, 0, &r[1]); | 
 |  | 
 | 		usb_dev_mph = | 
 | 		    platform_device_register_simple("fsl-ehci", i, r, 2); | 
 | 		if (IS_ERR(usb_dev_mph)) { | 
 | 			ret = PTR_ERR(usb_dev_mph); | 
 | 			goto err; | 
 | 		} | 
 |  | 
 | 		usb_dev_mph->dev.coherent_dma_mask = 0xffffffffUL; | 
 | 		usb_dev_mph->dev.dma_mask = &usb_dev_mph->dev.coherent_dma_mask; | 
 |  | 
 | 		usb_data.operating_mode = FSL_USB2_MPH_HOST; | 
 |  | 
 | 		prop = of_get_property(np, "port0", NULL); | 
 | 		if (prop) | 
 | 			usb_data.port_enables |= FSL_USB2_PORT0_ENABLED; | 
 |  | 
 | 		prop = of_get_property(np, "port1", NULL); | 
 | 		if (prop) | 
 | 			usb_data.port_enables |= FSL_USB2_PORT1_ENABLED; | 
 |  | 
 | 		prop = of_get_property(np, "phy_type", NULL); | 
 | 		usb_data.phy_mode = determine_usb_phy(prop); | 
 |  | 
 | 		ret = | 
 | 		    platform_device_add_data(usb_dev_mph, &usb_data, | 
 | 					     sizeof(struct | 
 | 						    fsl_usb2_platform_data)); | 
 | 		if (ret) | 
 | 			goto unreg_mph; | 
 | 		i++; | 
 | 	} | 
 |  | 
 | 	for_each_compatible_node(np, NULL, "fsl-usb2-dr") { | 
 | 		struct resource r[2]; | 
 | 		struct fsl_usb2_platform_data usb_data; | 
 | 		const unsigned char *prop = NULL; | 
 |  | 
 | 		if (!of_device_is_available(np)) | 
 | 			continue; | 
 |  | 
 | 		memset(&r, 0, sizeof(r)); | 
 | 		memset(&usb_data, 0, sizeof(usb_data)); | 
 |  | 
 | 		ret = of_address_to_resource(np, 0, &r[0]); | 
 | 		if (ret) | 
 | 			goto unreg_mph; | 
 |  | 
 | 		of_irq_to_resource(np, 0, &r[1]); | 
 |  | 
 | 		prop = of_get_property(np, "dr_mode", NULL); | 
 |  | 
 | 		if (!prop || !strcmp(prop, "host")) { | 
 | 			usb_data.operating_mode = FSL_USB2_DR_HOST; | 
 | 			usb_dev_dr_host = platform_device_register_simple( | 
 | 					"fsl-ehci", i, r, 2); | 
 | 			if (IS_ERR(usb_dev_dr_host)) { | 
 | 				ret = PTR_ERR(usb_dev_dr_host); | 
 | 				goto err; | 
 | 			} | 
 | 		} else if (prop && !strcmp(prop, "peripheral")) { | 
 | 			usb_data.operating_mode = FSL_USB2_DR_DEVICE; | 
 | 			usb_dev_dr_client = platform_device_register_simple( | 
 | 					"fsl-usb2-udc", i, r, 2); | 
 | 			if (IS_ERR(usb_dev_dr_client)) { | 
 | 				ret = PTR_ERR(usb_dev_dr_client); | 
 | 				goto err; | 
 | 			} | 
 | 		} else if (prop && !strcmp(prop, "otg")) { | 
 | 			usb_data.operating_mode = FSL_USB2_DR_OTG; | 
 | 			usb_dev_dr_host = platform_device_register_simple( | 
 | 					"fsl-ehci", i, r, 2); | 
 | 			if (IS_ERR(usb_dev_dr_host)) { | 
 | 				ret = PTR_ERR(usb_dev_dr_host); | 
 | 				goto err; | 
 | 			} | 
 | 			usb_dev_dr_client = platform_device_register_simple( | 
 | 					"fsl-usb2-udc", i, r, 2); | 
 | 			if (IS_ERR(usb_dev_dr_client)) { | 
 | 				ret = PTR_ERR(usb_dev_dr_client); | 
 | 				goto err; | 
 | 			} | 
 | 		} else { | 
 | 			ret = -EINVAL; | 
 | 			goto err; | 
 | 		} | 
 |  | 
 | 		prop = of_get_property(np, "phy_type", NULL); | 
 | 		usb_data.phy_mode = determine_usb_phy(prop); | 
 |  | 
 | 		if (usb_dev_dr_host) { | 
 | 			usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL; | 
 | 			usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host-> | 
 | 				dev.coherent_dma_mask; | 
 | 			if ((ret = platform_device_add_data(usb_dev_dr_host, | 
 | 						&usb_data, sizeof(struct | 
 | 						fsl_usb2_platform_data)))) | 
 | 				goto unreg_dr; | 
 | 		} | 
 | 		if (usb_dev_dr_client) { | 
 | 			usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL; | 
 | 			usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client-> | 
 | 				dev.coherent_dma_mask; | 
 | 			if ((ret = platform_device_add_data(usb_dev_dr_client, | 
 | 						&usb_data, sizeof(struct | 
 | 						fsl_usb2_platform_data)))) | 
 | 				goto unreg_dr; | 
 | 		} | 
 | 		i++; | 
 | 	} | 
 | 	return 0; | 
 |  | 
 | unreg_dr: | 
 | 	if (usb_dev_dr_host) | 
 | 		platform_device_unregister(usb_dev_dr_host); | 
 | 	if (usb_dev_dr_client) | 
 | 		platform_device_unregister(usb_dev_dr_client); | 
 | unreg_mph: | 
 | 	if (usb_dev_mph) | 
 | 		platform_device_unregister(usb_dev_mph); | 
 | err: | 
 | 	return ret; | 
 | } | 
 |  | 
 | arch_initcall(fsl_usb_of_init); | 
 |  | 
 | #if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx) | 
 | static __be32 __iomem *rstcr; | 
 |  | 
 | static int __init setup_rstcr(void) | 
 | { | 
 | 	struct device_node *np; | 
 | 	np = of_find_node_by_name(NULL, "global-utilities"); | 
 | 	if ((np && of_get_property(np, "fsl,has-rstcr", NULL))) { | 
 | 		rstcr = of_iomap(np, 0) + 0xb0; | 
 | 		if (!rstcr) | 
 | 			printk (KERN_EMERG "Error: reset control register " | 
 | 					"not mapped!\n"); | 
 | 	} else if (ppc_md.restart == fsl_rstcr_restart) | 
 | 		printk(KERN_ERR "No RSTCR register, warm reboot won't work\n"); | 
 |  | 
 | 	if (np) | 
 | 		of_node_put(np); | 
 | 	return 0; | 
 | } | 
 |  | 
 | arch_initcall(setup_rstcr); | 
 |  | 
 | void fsl_rstcr_restart(char *cmd) | 
 | { | 
 | 	local_irq_disable(); | 
 | 	if (rstcr) | 
 | 		/* set reset control register */ | 
 | 		out_be32(rstcr, 0x2);	/* HRESET_REQ */ | 
 |  | 
 | 	while (1) ; | 
 | } | 
 | #endif | 
 |  | 
 | #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) | 
 | struct platform_diu_data_ops diu_ops; | 
 | EXPORT_SYMBOL(diu_ops); | 
 | #endif |