|  | /* | 
|  | * Driver for keys on GPIO lines capable of generating interrupts. | 
|  | * | 
|  | * Copyright 2005 Phil Blundell | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/sysctl.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/gpio_keys.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/gpio.h> | 
|  |  | 
|  | struct gpio_button_data { | 
|  | struct gpio_keys_button *button; | 
|  | struct input_dev *input; | 
|  | struct timer_list timer; | 
|  | struct work_struct work; | 
|  | bool disabled; | 
|  | }; | 
|  |  | 
|  | struct gpio_keys_drvdata { | 
|  | struct input_dev *input; | 
|  | struct mutex disable_lock; | 
|  | unsigned int n_buttons; | 
|  | struct gpio_button_data data[0]; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * SYSFS interface for enabling/disabling keys and switches: | 
|  | * | 
|  | * There are 4 attributes under /sys/devices/platform/gpio-keys/ | 
|  | *	keys [ro]              - bitmap of keys (EV_KEY) which can be | 
|  | *	                         disabled | 
|  | *	switches [ro]          - bitmap of switches (EV_SW) which can be | 
|  | *	                         disabled | 
|  | *	disabled_keys [rw]     - bitmap of keys currently disabled | 
|  | *	disabled_switches [rw] - bitmap of switches currently disabled | 
|  | * | 
|  | * Userland can change these values and hence disable event generation | 
|  | * for each key (or switch). Disabling a key means its interrupt line | 
|  | * is disabled. | 
|  | * | 
|  | * For example, if we have following switches set up as gpio-keys: | 
|  | *	SW_DOCK = 5 | 
|  | *	SW_CAMERA_LENS_COVER = 9 | 
|  | *	SW_KEYPAD_SLIDE = 10 | 
|  | *	SW_FRONT_PROXIMITY = 11 | 
|  | * This is read from switches: | 
|  | *	11-9,5 | 
|  | * Next we want to disable proximity (11) and dock (5), we write: | 
|  | *	11,5 | 
|  | * to file disabled_switches. Now proximity and dock IRQs are disabled. | 
|  | * This can be verified by reading the file disabled_switches: | 
|  | *	11,5 | 
|  | * If we now want to enable proximity (11) switch we write: | 
|  | *	5 | 
|  | * to disabled_switches. | 
|  | * | 
|  | * We can disable only those keys which don't allow sharing the irq. | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * get_n_events_by_type() - returns maximum number of events per @type | 
|  | * @type: type of button (%EV_KEY, %EV_SW) | 
|  | * | 
|  | * Return value of this function can be used to allocate bitmap | 
|  | * large enough to hold all bits for given type. | 
|  | */ | 
|  | static inline int get_n_events_by_type(int type) | 
|  | { | 
|  | BUG_ON(type != EV_SW && type != EV_KEY); | 
|  |  | 
|  | return (type == EV_KEY) ? KEY_CNT : SW_CNT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * gpio_keys_disable_button() - disables given GPIO button | 
|  | * @bdata: button data for button to be disabled | 
|  | * | 
|  | * Disables button pointed by @bdata. This is done by masking | 
|  | * IRQ line. After this function is called, button won't generate | 
|  | * input events anymore. Note that one can only disable buttons | 
|  | * that don't share IRQs. | 
|  | * | 
|  | * Make sure that @bdata->disable_lock is locked when entering | 
|  | * this function to avoid races when concurrent threads are | 
|  | * disabling buttons at the same time. | 
|  | */ | 
|  | static void gpio_keys_disable_button(struct gpio_button_data *bdata) | 
|  | { | 
|  | if (!bdata->disabled) { | 
|  | /* | 
|  | * Disable IRQ and possible debouncing timer. | 
|  | */ | 
|  | disable_irq(gpio_to_irq(bdata->button->gpio)); | 
|  | if (bdata->button->debounce_interval) | 
|  | del_timer_sync(&bdata->timer); | 
|  |  | 
|  | bdata->disabled = true; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * gpio_keys_enable_button() - enables given GPIO button | 
|  | * @bdata: button data for button to be disabled | 
|  | * | 
|  | * Enables given button pointed by @bdata. | 
|  | * | 
|  | * Make sure that @bdata->disable_lock is locked when entering | 
|  | * this function to avoid races with concurrent threads trying | 
|  | * to enable the same button at the same time. | 
|  | */ | 
|  | static void gpio_keys_enable_button(struct gpio_button_data *bdata) | 
|  | { | 
|  | if (bdata->disabled) { | 
|  | enable_irq(gpio_to_irq(bdata->button->gpio)); | 
|  | bdata->disabled = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * gpio_keys_attr_show_helper() - fill in stringified bitmap of buttons | 
|  | * @ddata: pointer to drvdata | 
|  | * @buf: buffer where stringified bitmap is written | 
|  | * @type: button type (%EV_KEY, %EV_SW) | 
|  | * @only_disabled: does caller want only those buttons that are | 
|  | *                 currently disabled or all buttons that can be | 
|  | *                 disabled | 
|  | * | 
|  | * This function writes buttons that can be disabled to @buf. If | 
|  | * @only_disabled is true, then @buf contains only those buttons | 
|  | * that are currently disabled. Returns 0 on success or negative | 
|  | * errno on failure. | 
|  | */ | 
|  | static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata, | 
|  | char *buf, unsigned int type, | 
|  | bool only_disabled) | 
|  | { | 
|  | int n_events = get_n_events_by_type(type); | 
|  | unsigned long *bits; | 
|  | ssize_t ret; | 
|  | int i; | 
|  |  | 
|  | bits = kcalloc(BITS_TO_LONGS(n_events), sizeof(*bits), GFP_KERNEL); | 
|  | if (!bits) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (i = 0; i < ddata->n_buttons; i++) { | 
|  | struct gpio_button_data *bdata = &ddata->data[i]; | 
|  |  | 
|  | if (bdata->button->type != type) | 
|  | continue; | 
|  |  | 
|  | if (only_disabled && !bdata->disabled) | 
|  | continue; | 
|  |  | 
|  | __set_bit(bdata->button->code, bits); | 
|  | } | 
|  |  | 
|  | ret = bitmap_scnlistprintf(buf, PAGE_SIZE - 2, bits, n_events); | 
|  | buf[ret++] = '\n'; | 
|  | buf[ret] = '\0'; | 
|  |  | 
|  | kfree(bits); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * gpio_keys_attr_store_helper() - enable/disable buttons based on given bitmap | 
|  | * @ddata: pointer to drvdata | 
|  | * @buf: buffer from userspace that contains stringified bitmap | 
|  | * @type: button type (%EV_KEY, %EV_SW) | 
|  | * | 
|  | * This function parses stringified bitmap from @buf and disables/enables | 
|  | * GPIO buttons accordinly. Returns 0 on success and negative error | 
|  | * on failure. | 
|  | */ | 
|  | static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata, | 
|  | const char *buf, unsigned int type) | 
|  | { | 
|  | int n_events = get_n_events_by_type(type); | 
|  | unsigned long *bits; | 
|  | ssize_t error; | 
|  | int i; | 
|  |  | 
|  | bits = kcalloc(BITS_TO_LONGS(n_events), sizeof(*bits), GFP_KERNEL); | 
|  | if (!bits) | 
|  | return -ENOMEM; | 
|  |  | 
|  | error = bitmap_parselist(buf, bits, n_events); | 
|  | if (error) | 
|  | goto out; | 
|  |  | 
|  | /* First validate */ | 
|  | for (i = 0; i < ddata->n_buttons; i++) { | 
|  | struct gpio_button_data *bdata = &ddata->data[i]; | 
|  |  | 
|  | if (bdata->button->type != type) | 
|  | continue; | 
|  |  | 
|  | if (test_bit(bdata->button->code, bits) && | 
|  | !bdata->button->can_disable) { | 
|  | error = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_lock(&ddata->disable_lock); | 
|  |  | 
|  | for (i = 0; i < ddata->n_buttons; i++) { | 
|  | struct gpio_button_data *bdata = &ddata->data[i]; | 
|  |  | 
|  | if (bdata->button->type != type) | 
|  | continue; | 
|  |  | 
|  | if (test_bit(bdata->button->code, bits)) | 
|  | gpio_keys_disable_button(bdata); | 
|  | else | 
|  | gpio_keys_enable_button(bdata); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&ddata->disable_lock); | 
|  |  | 
|  | out: | 
|  | kfree(bits); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | #define ATTR_SHOW_FN(name, type, only_disabled)				\ | 
|  | static ssize_t gpio_keys_show_##name(struct device *dev,		\ | 
|  | struct device_attribute *attr,	\ | 
|  | char *buf)				\ | 
|  | {									\ | 
|  | struct platform_device *pdev = to_platform_device(dev);		\ | 
|  | struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);	\ | 
|  | \ | 
|  | return gpio_keys_attr_show_helper(ddata, buf,			\ | 
|  | type, only_disabled);		\ | 
|  | } | 
|  |  | 
|  | ATTR_SHOW_FN(keys, EV_KEY, false); | 
|  | ATTR_SHOW_FN(switches, EV_SW, false); | 
|  | ATTR_SHOW_FN(disabled_keys, EV_KEY, true); | 
|  | ATTR_SHOW_FN(disabled_switches, EV_SW, true); | 
|  |  | 
|  | /* | 
|  | * ATTRIBUTES: | 
|  | * | 
|  | * /sys/devices/platform/gpio-keys/keys [ro] | 
|  | * /sys/devices/platform/gpio-keys/switches [ro] | 
|  | */ | 
|  | static DEVICE_ATTR(keys, S_IRUGO, gpio_keys_show_keys, NULL); | 
|  | static DEVICE_ATTR(switches, S_IRUGO, gpio_keys_show_switches, NULL); | 
|  |  | 
|  | #define ATTR_STORE_FN(name, type)					\ | 
|  | static ssize_t gpio_keys_store_##name(struct device *dev,		\ | 
|  | struct device_attribute *attr,	\ | 
|  | const char *buf,			\ | 
|  | size_t count)			\ | 
|  | {									\ | 
|  | struct platform_device *pdev = to_platform_device(dev);		\ | 
|  | struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);	\ | 
|  | ssize_t error;							\ | 
|  | \ | 
|  | error = gpio_keys_attr_store_helper(ddata, buf, type);		\ | 
|  | if (error)							\ | 
|  | return error;						\ | 
|  | \ | 
|  | return count;							\ | 
|  | } | 
|  |  | 
|  | ATTR_STORE_FN(disabled_keys, EV_KEY); | 
|  | ATTR_STORE_FN(disabled_switches, EV_SW); | 
|  |  | 
|  | /* | 
|  | * ATTRIBUTES: | 
|  | * | 
|  | * /sys/devices/platform/gpio-keys/disabled_keys [rw] | 
|  | * /sys/devices/platform/gpio-keys/disables_switches [rw] | 
|  | */ | 
|  | static DEVICE_ATTR(disabled_keys, S_IWUSR | S_IRUGO, | 
|  | gpio_keys_show_disabled_keys, | 
|  | gpio_keys_store_disabled_keys); | 
|  | static DEVICE_ATTR(disabled_switches, S_IWUSR | S_IRUGO, | 
|  | gpio_keys_show_disabled_switches, | 
|  | gpio_keys_store_disabled_switches); | 
|  |  | 
|  | static struct attribute *gpio_keys_attrs[] = { | 
|  | &dev_attr_keys.attr, | 
|  | &dev_attr_switches.attr, | 
|  | &dev_attr_disabled_keys.attr, | 
|  | &dev_attr_disabled_switches.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct attribute_group gpio_keys_attr_group = { | 
|  | .attrs = gpio_keys_attrs, | 
|  | }; | 
|  |  | 
|  | static void gpio_keys_report_event(struct gpio_button_data *bdata) | 
|  | { | 
|  | struct gpio_keys_button *button = bdata->button; | 
|  | struct input_dev *input = bdata->input; | 
|  | unsigned int type = button->type ?: EV_KEY; | 
|  | int state = (gpio_get_value(button->gpio) ? 1 : 0) ^ button->active_low; | 
|  |  | 
|  | input_event(input, type, button->code, !!state); | 
|  | input_sync(input); | 
|  | } | 
|  |  | 
|  | static void gpio_keys_work_func(struct work_struct *work) | 
|  | { | 
|  | struct gpio_button_data *bdata = | 
|  | container_of(work, struct gpio_button_data, work); | 
|  |  | 
|  | gpio_keys_report_event(bdata); | 
|  | } | 
|  |  | 
|  | static void gpio_keys_timer(unsigned long _data) | 
|  | { | 
|  | struct gpio_button_data *data = (struct gpio_button_data *)_data; | 
|  |  | 
|  | schedule_work(&data->work); | 
|  | } | 
|  |  | 
|  | static irqreturn_t gpio_keys_isr(int irq, void *dev_id) | 
|  | { | 
|  | struct gpio_button_data *bdata = dev_id; | 
|  | struct gpio_keys_button *button = bdata->button; | 
|  |  | 
|  | BUG_ON(irq != gpio_to_irq(button->gpio)); | 
|  |  | 
|  | if (button->debounce_interval) | 
|  | mod_timer(&bdata->timer, | 
|  | jiffies + msecs_to_jiffies(button->debounce_interval)); | 
|  | else | 
|  | schedule_work(&bdata->work); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int __devinit gpio_keys_setup_key(struct platform_device *pdev, | 
|  | struct gpio_button_data *bdata, | 
|  | struct gpio_keys_button *button) | 
|  | { | 
|  | char *desc = button->desc ? button->desc : "gpio_keys"; | 
|  | struct device *dev = &pdev->dev; | 
|  | unsigned long irqflags; | 
|  | int irq, error; | 
|  |  | 
|  | setup_timer(&bdata->timer, gpio_keys_timer, (unsigned long)bdata); | 
|  | INIT_WORK(&bdata->work, gpio_keys_work_func); | 
|  |  | 
|  | error = gpio_request(button->gpio, desc); | 
|  | if (error < 0) { | 
|  | dev_err(dev, "failed to request GPIO %d, error %d\n", | 
|  | button->gpio, error); | 
|  | goto fail2; | 
|  | } | 
|  |  | 
|  | error = gpio_direction_input(button->gpio); | 
|  | if (error < 0) { | 
|  | dev_err(dev, "failed to configure" | 
|  | " direction for GPIO %d, error %d\n", | 
|  | button->gpio, error); | 
|  | goto fail3; | 
|  | } | 
|  |  | 
|  | irq = gpio_to_irq(button->gpio); | 
|  | if (irq < 0) { | 
|  | error = irq; | 
|  | dev_err(dev, "Unable to get irq number for GPIO %d, error %d\n", | 
|  | button->gpio, error); | 
|  | goto fail3; | 
|  | } | 
|  |  | 
|  | irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; | 
|  | /* | 
|  | * If platform has specified that the button can be disabled, | 
|  | * we don't want it to share the interrupt line. | 
|  | */ | 
|  | if (!button->can_disable) | 
|  | irqflags |= IRQF_SHARED; | 
|  |  | 
|  | error = request_irq(irq, gpio_keys_isr, irqflags, desc, bdata); | 
|  | if (error) { | 
|  | dev_err(dev, "Unable to claim irq %d; error %d\n", | 
|  | irq, error); | 
|  | goto fail3; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail3: | 
|  | gpio_free(button->gpio); | 
|  | fail2: | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int __devinit gpio_keys_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; | 
|  | struct gpio_keys_drvdata *ddata; | 
|  | struct device *dev = &pdev->dev; | 
|  | struct input_dev *input; | 
|  | int i, error; | 
|  | int wakeup = 0; | 
|  |  | 
|  | ddata = kzalloc(sizeof(struct gpio_keys_drvdata) + | 
|  | pdata->nbuttons * sizeof(struct gpio_button_data), | 
|  | GFP_KERNEL); | 
|  | input = input_allocate_device(); | 
|  | if (!ddata || !input) { | 
|  | dev_err(dev, "failed to allocate state\n"); | 
|  | error = -ENOMEM; | 
|  | goto fail1; | 
|  | } | 
|  |  | 
|  | ddata->input = input; | 
|  | ddata->n_buttons = pdata->nbuttons; | 
|  | mutex_init(&ddata->disable_lock); | 
|  |  | 
|  | platform_set_drvdata(pdev, ddata); | 
|  |  | 
|  | input->name = pdev->name; | 
|  | input->phys = "gpio-keys/input0"; | 
|  | input->dev.parent = &pdev->dev; | 
|  |  | 
|  | input->id.bustype = BUS_HOST; | 
|  | input->id.vendor = 0x0001; | 
|  | input->id.product = 0x0001; | 
|  | input->id.version = 0x0100; | 
|  |  | 
|  | /* Enable auto repeat feature of Linux input subsystem */ | 
|  | if (pdata->rep) | 
|  | __set_bit(EV_REP, input->evbit); | 
|  |  | 
|  | for (i = 0; i < pdata->nbuttons; i++) { | 
|  | struct gpio_keys_button *button = &pdata->buttons[i]; | 
|  | struct gpio_button_data *bdata = &ddata->data[i]; | 
|  | unsigned int type = button->type ?: EV_KEY; | 
|  |  | 
|  | bdata->input = input; | 
|  | bdata->button = button; | 
|  |  | 
|  | error = gpio_keys_setup_key(pdev, bdata, button); | 
|  | if (error) | 
|  | goto fail2; | 
|  |  | 
|  | if (button->wakeup) | 
|  | wakeup = 1; | 
|  |  | 
|  | input_set_capability(input, type, button->code); | 
|  | } | 
|  |  | 
|  | error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group); | 
|  | if (error) { | 
|  | dev_err(dev, "Unable to export keys/switches, error: %d\n", | 
|  | error); | 
|  | goto fail2; | 
|  | } | 
|  |  | 
|  | error = input_register_device(input); | 
|  | if (error) { | 
|  | dev_err(dev, "Unable to register input device, error: %d\n", | 
|  | error); | 
|  | goto fail3; | 
|  | } | 
|  |  | 
|  | /* get current state of buttons */ | 
|  | for (i = 0; i < pdata->nbuttons; i++) | 
|  | gpio_keys_report_event(&ddata->data[i]); | 
|  | input_sync(input); | 
|  |  | 
|  | device_init_wakeup(&pdev->dev, wakeup); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail3: | 
|  | sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group); | 
|  | fail2: | 
|  | while (--i >= 0) { | 
|  | free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); | 
|  | if (pdata->buttons[i].debounce_interval) | 
|  | del_timer_sync(&ddata->data[i].timer); | 
|  | cancel_work_sync(&ddata->data[i].work); | 
|  | gpio_free(pdata->buttons[i].gpio); | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | fail1: | 
|  | input_free_device(input); | 
|  | kfree(ddata); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int __devexit gpio_keys_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; | 
|  | struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); | 
|  | struct input_dev *input = ddata->input; | 
|  | int i; | 
|  |  | 
|  | sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group); | 
|  |  | 
|  | device_init_wakeup(&pdev->dev, 0); | 
|  |  | 
|  | for (i = 0; i < pdata->nbuttons; i++) { | 
|  | int irq = gpio_to_irq(pdata->buttons[i].gpio); | 
|  | free_irq(irq, &ddata->data[i]); | 
|  | if (pdata->buttons[i].debounce_interval) | 
|  | del_timer_sync(&ddata->data[i].timer); | 
|  | cancel_work_sync(&ddata->data[i].work); | 
|  | gpio_free(pdata->buttons[i].gpio); | 
|  | } | 
|  |  | 
|  | input_unregister_device(input); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int gpio_keys_suspend(struct device *dev) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; | 
|  | int i; | 
|  |  | 
|  | if (device_may_wakeup(&pdev->dev)) { | 
|  | for (i = 0; i < pdata->nbuttons; i++) { | 
|  | struct gpio_keys_button *button = &pdata->buttons[i]; | 
|  | if (button->wakeup) { | 
|  | int irq = gpio_to_irq(button->gpio); | 
|  | enable_irq_wake(irq); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int gpio_keys_resume(struct device *dev) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); | 
|  | struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < pdata->nbuttons; i++) { | 
|  |  | 
|  | struct gpio_keys_button *button = &pdata->buttons[i]; | 
|  | if (button->wakeup && device_may_wakeup(&pdev->dev)) { | 
|  | int irq = gpio_to_irq(button->gpio); | 
|  | disable_irq_wake(irq); | 
|  | } | 
|  |  | 
|  | gpio_keys_report_event(&ddata->data[i]); | 
|  | } | 
|  | input_sync(ddata->input); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops gpio_keys_pm_ops = { | 
|  | .suspend	= gpio_keys_suspend, | 
|  | .resume		= gpio_keys_resume, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static struct platform_driver gpio_keys_device_driver = { | 
|  | .probe		= gpio_keys_probe, | 
|  | .remove		= __devexit_p(gpio_keys_remove), | 
|  | .driver		= { | 
|  | .name	= "gpio-keys", | 
|  | .owner	= THIS_MODULE, | 
|  | #ifdef CONFIG_PM | 
|  | .pm	= &gpio_keys_pm_ops, | 
|  | #endif | 
|  | } | 
|  | }; | 
|  |  | 
|  | static int __init gpio_keys_init(void) | 
|  | { | 
|  | return platform_driver_register(&gpio_keys_device_driver); | 
|  | } | 
|  |  | 
|  | static void __exit gpio_keys_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&gpio_keys_device_driver); | 
|  | } | 
|  |  | 
|  | module_init(gpio_keys_init); | 
|  | module_exit(gpio_keys_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>"); | 
|  | MODULE_DESCRIPTION("Keyboard driver for CPU GPIOs"); | 
|  | MODULE_ALIAS("platform:gpio-keys"); |