|  | /* | 
|  | * linux/drivers/power/wm97xx_battery.c | 
|  | * | 
|  | * Battery measurement code for WM97xx | 
|  | * | 
|  | * based on tosa_battery.c | 
|  | * | 
|  | * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/power_supply.h> | 
|  | #include <linux/wm97xx.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/irq.h> | 
|  |  | 
|  | static DEFINE_MUTEX(bat_lock); | 
|  | static struct work_struct bat_work; | 
|  | static struct mutex work_lock; | 
|  | static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN; | 
|  | static struct wm97xx_batt_info *gpdata; | 
|  | static enum power_supply_property *prop; | 
|  |  | 
|  | static unsigned long wm97xx_read_bat(struct power_supply *bat_ps) | 
|  | { | 
|  | struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; | 
|  | struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; | 
|  |  | 
|  | return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent), | 
|  | pdata->batt_aux) * pdata->batt_mult / | 
|  | pdata->batt_div; | 
|  | } | 
|  |  | 
|  | static unsigned long wm97xx_read_temp(struct power_supply *bat_ps) | 
|  | { | 
|  | struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; | 
|  | struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; | 
|  |  | 
|  | return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent), | 
|  | pdata->temp_aux) * pdata->temp_mult / | 
|  | pdata->temp_div; | 
|  | } | 
|  |  | 
|  | static int wm97xx_bat_get_property(struct power_supply *bat_ps, | 
|  | enum power_supply_property psp, | 
|  | union power_supply_propval *val) | 
|  | { | 
|  | struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; | 
|  | struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; | 
|  |  | 
|  | switch (psp) { | 
|  | case POWER_SUPPLY_PROP_STATUS: | 
|  | val->intval = bat_status; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_TECHNOLOGY: | 
|  | val->intval = pdata->batt_tech; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | 
|  | if (pdata->batt_aux >= 0) | 
|  | val->intval = wm97xx_read_bat(bat_ps); | 
|  | else | 
|  | return -EINVAL; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_TEMP: | 
|  | if (pdata->temp_aux >= 0) | 
|  | val->intval = wm97xx_read_temp(bat_ps); | 
|  | else | 
|  | return -EINVAL; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_MAX: | 
|  | if (pdata->max_voltage >= 0) | 
|  | val->intval = pdata->max_voltage; | 
|  | else | 
|  | return -EINVAL; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_MIN: | 
|  | if (pdata->min_voltage >= 0) | 
|  | val->intval = pdata->min_voltage; | 
|  | else | 
|  | return -EINVAL; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_PRESENT: | 
|  | val->intval = 1; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wm97xx_bat_external_power_changed(struct power_supply *bat_ps) | 
|  | { | 
|  | schedule_work(&bat_work); | 
|  | } | 
|  |  | 
|  | static void wm97xx_bat_update(struct power_supply *bat_ps) | 
|  | { | 
|  | int old_status = bat_status; | 
|  | struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; | 
|  | struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; | 
|  |  | 
|  | mutex_lock(&work_lock); | 
|  |  | 
|  | bat_status = (pdata->charge_gpio >= 0) ? | 
|  | (gpio_get_value(pdata->charge_gpio) ? | 
|  | POWER_SUPPLY_STATUS_DISCHARGING : | 
|  | POWER_SUPPLY_STATUS_CHARGING) : | 
|  | POWER_SUPPLY_STATUS_UNKNOWN; | 
|  |  | 
|  | if (old_status != bat_status) { | 
|  | pr_debug("%s: %i -> %i\n", bat_ps->name, old_status, | 
|  | bat_status); | 
|  | power_supply_changed(bat_ps); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&work_lock); | 
|  | } | 
|  |  | 
|  | static struct power_supply bat_ps = { | 
|  | .type			= POWER_SUPPLY_TYPE_BATTERY, | 
|  | .get_property		= wm97xx_bat_get_property, | 
|  | .external_power_changed = wm97xx_bat_external_power_changed, | 
|  | .use_for_apm		= 1, | 
|  | }; | 
|  |  | 
|  | static void wm97xx_bat_work(struct work_struct *work) | 
|  | { | 
|  | wm97xx_bat_update(&bat_ps); | 
|  | } | 
|  |  | 
|  | static irqreturn_t wm97xx_chrg_irq(int irq, void *data) | 
|  | { | 
|  | schedule_work(&bat_work); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int wm97xx_bat_suspend(struct device *dev) | 
|  | { | 
|  | flush_scheduled_work(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm97xx_bat_resume(struct device *dev) | 
|  | { | 
|  | schedule_work(&bat_work); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops wm97xx_bat_pm_ops = { | 
|  | .suspend	= wm97xx_bat_suspend, | 
|  | .resume		= wm97xx_bat_resume, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static int __devinit wm97xx_bat_probe(struct platform_device *dev) | 
|  | { | 
|  | int ret = 0; | 
|  | int props = 1;	/* POWER_SUPPLY_PROP_PRESENT */ | 
|  | int i = 0; | 
|  | struct wm97xx_pdata *wmdata = dev->dev.platform_data; | 
|  | struct wm97xx_batt_pdata *pdata; | 
|  |  | 
|  | if (gpdata) { | 
|  | dev_err(&dev->dev, "Do not pass platform_data through " | 
|  | "wm97xx_bat_set_pdata!\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!wmdata) { | 
|  | dev_err(&dev->dev, "No platform data supplied\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | pdata = wmdata->batt_pdata; | 
|  |  | 
|  | if (dev->id != -1) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_init(&work_lock); | 
|  |  | 
|  | if (!pdata) { | 
|  | dev_err(&dev->dev, "No platform_data supplied\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (gpio_is_valid(pdata->charge_gpio)) { | 
|  | ret = gpio_request(pdata->charge_gpio, "BATT CHRG"); | 
|  | if (ret) | 
|  | goto err; | 
|  | ret = gpio_direction_input(pdata->charge_gpio); | 
|  | if (ret) | 
|  | goto err2; | 
|  | ret = request_irq(gpio_to_irq(pdata->charge_gpio), | 
|  | wm97xx_chrg_irq, IRQF_DISABLED, | 
|  | "AC Detect", dev); | 
|  | if (ret) | 
|  | goto err2; | 
|  | props++;	/* POWER_SUPPLY_PROP_STATUS */ | 
|  | } | 
|  |  | 
|  | if (pdata->batt_tech >= 0) | 
|  | props++;	/* POWER_SUPPLY_PROP_TECHNOLOGY */ | 
|  | if (pdata->temp_aux >= 0) | 
|  | props++;	/* POWER_SUPPLY_PROP_TEMP */ | 
|  | if (pdata->batt_aux >= 0) | 
|  | props++;	/* POWER_SUPPLY_PROP_VOLTAGE_NOW */ | 
|  | if (pdata->max_voltage >= 0) | 
|  | props++;	/* POWER_SUPPLY_PROP_VOLTAGE_MAX */ | 
|  | if (pdata->min_voltage >= 0) | 
|  | props++;	/* POWER_SUPPLY_PROP_VOLTAGE_MIN */ | 
|  |  | 
|  | prop = kzalloc(props * sizeof(*prop), GFP_KERNEL); | 
|  | if (!prop) | 
|  | goto err3; | 
|  |  | 
|  | prop[i++] = POWER_SUPPLY_PROP_PRESENT; | 
|  | if (pdata->charge_gpio >= 0) | 
|  | prop[i++] = POWER_SUPPLY_PROP_STATUS; | 
|  | if (pdata->batt_tech >= 0) | 
|  | prop[i++] = POWER_SUPPLY_PROP_TECHNOLOGY; | 
|  | if (pdata->temp_aux >= 0) | 
|  | prop[i++] = POWER_SUPPLY_PROP_TEMP; | 
|  | if (pdata->batt_aux >= 0) | 
|  | prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_NOW; | 
|  | if (pdata->max_voltage >= 0) | 
|  | prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MAX; | 
|  | if (pdata->min_voltage >= 0) | 
|  | prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MIN; | 
|  |  | 
|  | INIT_WORK(&bat_work, wm97xx_bat_work); | 
|  |  | 
|  | if (!pdata->batt_name) { | 
|  | dev_info(&dev->dev, "Please consider setting proper battery " | 
|  | "name in platform definition file, falling " | 
|  | "back to name \"wm97xx-batt\"\n"); | 
|  | bat_ps.name = "wm97xx-batt"; | 
|  | } else | 
|  | bat_ps.name = pdata->batt_name; | 
|  |  | 
|  | bat_ps.properties = prop; | 
|  | bat_ps.num_properties = props; | 
|  |  | 
|  | ret = power_supply_register(&dev->dev, &bat_ps); | 
|  | if (!ret) | 
|  | schedule_work(&bat_work); | 
|  | else | 
|  | goto err4; | 
|  |  | 
|  | return 0; | 
|  | err4: | 
|  | kfree(prop); | 
|  | err3: | 
|  | if (gpio_is_valid(pdata->charge_gpio)) | 
|  | free_irq(gpio_to_irq(pdata->charge_gpio), dev); | 
|  | err2: | 
|  | if (gpio_is_valid(pdata->charge_gpio)) | 
|  | gpio_free(pdata->charge_gpio); | 
|  | err: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit wm97xx_bat_remove(struct platform_device *dev) | 
|  | { | 
|  | struct wm97xx_pdata *wmdata = dev->dev.platform_data; | 
|  | struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; | 
|  |  | 
|  | if (pdata && gpio_is_valid(pdata->charge_gpio)) { | 
|  | free_irq(gpio_to_irq(pdata->charge_gpio), dev); | 
|  | gpio_free(pdata->charge_gpio); | 
|  | } | 
|  | flush_scheduled_work(); | 
|  | power_supply_unregister(&bat_ps); | 
|  | kfree(prop); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver wm97xx_bat_driver = { | 
|  | .driver	= { | 
|  | .name	= "wm97xx-battery", | 
|  | .owner	= THIS_MODULE, | 
|  | #ifdef CONFIG_PM | 
|  | .pm	= &wm97xx_bat_pm_ops, | 
|  | #endif | 
|  | }, | 
|  | .probe		= wm97xx_bat_probe, | 
|  | .remove		= __devexit_p(wm97xx_bat_remove), | 
|  | }; | 
|  |  | 
|  | static int __init wm97xx_bat_init(void) | 
|  | { | 
|  | return platform_driver_register(&wm97xx_bat_driver); | 
|  | } | 
|  |  | 
|  | static void __exit wm97xx_bat_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&wm97xx_bat_driver); | 
|  | } | 
|  |  | 
|  | void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) | 
|  | { | 
|  | gpdata = data; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata); | 
|  |  | 
|  | module_init(wm97xx_bat_init); | 
|  | module_exit(wm97xx_bat_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); | 
|  | MODULE_DESCRIPTION("WM97xx battery driver"); |