drivers/scsi/fnic/fcpio.h - android_kernel_htc_msm8960 - Gitiles

 /*
  * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
  * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
  *
  * This program is free software; you may redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
 #ifndef _FCPIO_H_
 #define _FCPIO_H_

 #include <linux/if_ether.h>

 /*
  * This header file includes all of the data structures used for
  * communication by the host driver to the fcp firmware.
  */

 /*
  * Exchange and sequence id space allocated to the host driver
  */
 #define FCPIO_HOST_EXCH_RANGE_START         0x1000
 #define FCPIO_HOST_EXCH_RANGE_END           0x1fff
 #define FCPIO_HOST_SEQ_ID_RANGE_START       0x80
 #define FCPIO_HOST_SEQ_ID_RANGE_END         0xff

 /*
  * Command entry type
  */
 enum fcpio_type {
 	/*
 	 * Initiator request types
 	 */
 	FCPIO_ICMND_16 = 0x1,
 	FCPIO_ICMND_32,
 	FCPIO_ICMND_CMPL,
 	FCPIO_ITMF,
 	FCPIO_ITMF_CMPL,

 	/*
 	 * Target request types
 	 */
 	FCPIO_TCMND_16 = 0x11,
 	FCPIO_TCMND_32,
 	FCPIO_TDATA,
 	FCPIO_TXRDY,
 	FCPIO_TRSP,
 	FCPIO_TDRSP_CMPL,
 	FCPIO_TTMF,
 	FCPIO_TTMF_ACK,
 	FCPIO_TABORT,
 	FCPIO_TABORT_CMPL,

 	/*
 	 * Misc request types
 	 */
 	FCPIO_ACK = 0x20,
 	FCPIO_RESET,
 	FCPIO_RESET_CMPL,
 	FCPIO_FLOGI_REG,
 	FCPIO_FLOGI_REG_CMPL,
 	FCPIO_ECHO,
 	FCPIO_ECHO_CMPL,
 	FCPIO_LUNMAP_CHNG,
 	FCPIO_LUNMAP_REQ,
 	FCPIO_LUNMAP_REQ_CMPL,
 	FCPIO_FLOGI_FIP_REG,
 	FCPIO_FLOGI_FIP_REG_CMPL,
 };

 /*
  * Header status codes from the firmware
  */
 enum fcpio_status {
 	FCPIO_SUCCESS = 0,              /* request was successful */

 	/*
 	 * If a request to the firmware is rejected, the original request
 	 * header will be returned with the status set to one of the following:
 	 */
 	FCPIO_INVALID_HEADER,    /* header contains invalid data */
 	FCPIO_OUT_OF_RESOURCE,   /* out of resources to complete request */
 	FCPIO_INVALID_PARAM,     /* some parameter in request is invalid */
 	FCPIO_REQ_NOT_SUPPORTED, /* request type is not supported */
 	FCPIO_IO_NOT_FOUND,      /* requested I/O was not found */

 	/*
 	 * Once a request is processed, the firmware will usually return
 	 * a cmpl message type.  In cases where errors occurred,
 	 * the header status field would be filled in with one of the following:
 	 */
 	FCPIO_ABORTED = 0x41,     /* request was aborted */
 	FCPIO_TIMEOUT,            /* request was timed out */
 	FCPIO_SGL_INVALID,        /* request was aborted due to sgl error */
 	FCPIO_MSS_INVALID,        /* request was aborted due to mss error */
 	FCPIO_DATA_CNT_MISMATCH,  /* recv/sent more/less data than exp. */
 	FCPIO_FW_ERR,             /* request was terminated due to fw error */
 	FCPIO_ITMF_REJECTED,      /* itmf req was rejected by remote node */
 	FCPIO_ITMF_FAILED,        /* itmf req was failed by remote node */
 	FCPIO_ITMF_INCORRECT_LUN, /* itmf req targeted incorrect LUN */
 	FCPIO_CMND_REJECTED,      /* request was invalid and rejected */
 	FCPIO_NO_PATH_AVAIL,      /* no paths to the lun was available */
 	FCPIO_PATH_FAILED,        /* i/o sent to current path failed */
 	FCPIO_LUNMAP_CHNG_PEND,   /* i/o rejected due to lunmap change */
 };

 /*
  * The header command tag.  All host requests will use the "tag" field
  * to mark commands with a unique tag.  When the firmware responds to
  * a host request, it will copy the tag field into the response.
  *
  * The only firmware requests that will use the rx_id/ox_id fields instead
  * of the tag field will be the target command and target task management
  * requests.  These two requests do not have corresponding host requests
  * since they come directly from the FC initiator on the network.
  */
 struct fcpio_tag {
 	union {
 		u32 req_id;
 		struct {
 			u16 rx_id;
 			u16 ox_id;
 		} ex_id;
 	} u;
 };

 static inline void
 fcpio_tag_id_enc(struct fcpio_tag *tag, u32 id)
 {
 	tag->u.req_id = id;
 }

 static inline void
 fcpio_tag_id_dec(struct fcpio_tag *tag, u32 *id)
 {
 	*id = tag->u.req_id;
 }

 static inline void
 fcpio_tag_exid_enc(struct fcpio_tag *tag, u16 ox_id, u16 rx_id)
 {
 	tag->u.ex_id.rx_id = rx_id;
 	tag->u.ex_id.ox_id = ox_id;
 }

 static inline void
 fcpio_tag_exid_dec(struct fcpio_tag *tag, u16 *ox_id, u16 *rx_id)
 {
 	*rx_id = tag->u.ex_id.rx_id;
 	*ox_id = tag->u.ex_id.ox_id;
 }

 /*
  * The header for an fcpio request, whether from the firmware or from the
  * host driver
  */
 struct fcpio_header {
 	u8            type;           /* enum fcpio_type */
 	u8            status;         /* header status entry */
 	u16           _resvd;         /* reserved */
 	struct fcpio_tag    tag;      /* header tag */
 };

 static inline void
 fcpio_header_enc(struct fcpio_header *hdr,
 		 u8 type, u8 status,
 		 struct fcpio_tag tag)
 {
 	hdr->type = type;
 	hdr->status = status;
 	hdr->_resvd = 0;
 	hdr->tag = tag;
 }

 static inline void
 fcpio_header_dec(struct fcpio_header *hdr,
 		 u8 *type, u8 *status,
 		 struct fcpio_tag *tag)
 {
 	*type = hdr->type;
 	*status = hdr->status;
 	*tag = hdr->tag;
 }

 #define CDB_16      16
 #define CDB_32      32
 #define LUN_ADDRESS 8

 /*
  * fcpio_icmnd_16: host -> firmware request
  *
  * used for sending out an initiator SCSI 16-byte command
  */
 struct fcpio_icmnd_16 {
 	u32	  lunmap_id;		/* index into lunmap table */
 	u8	  special_req_flags;	/* special exchange request flags */
 	u8	  _resvd0[3];	        /* reserved */
 	u32	  sgl_cnt;		/* scatter-gather list count */
 	u32	  sense_len;		/* sense buffer length */
 	u64	  sgl_addr;		/* scatter-gather list addr */
 	u64	  sense_addr;		/* sense buffer address */
 	u8	  crn;			/* SCSI Command Reference No. */
 	u8	  pri_ta;		/* SCSI Priority and Task attribute */
 	u8	  _resvd1;		/* reserved: should be 0 */
 	u8	  flags;		/* command flags */
 	u8	  scsi_cdb[CDB_16];	/* SCSI Cmnd Descriptor Block */
 	u32	  data_len;		/* length of data expected */
 	u8	  lun[LUN_ADDRESS];	/* FC vNIC only: LUN address */
 	u8	  _resvd2;		/* reserved */
 	u8	  d_id[3];		/* FC vNIC only: Target D_ID */
 	u16	  mss;			/* FC vNIC only: max burst */
 	u16	  _resvd3;		/* reserved */
 	u32	  r_a_tov;		/* FC vNIC only: Res. Alloc Timeout */
 	u32	  e_d_tov;	        /* FC vNIC only: Err Detect Timeout */
 };

 /*
  * Special request flags
  */
 #define FCPIO_ICMND_SRFLAG_RETRY 0x01   /* Enable Retry handling on exchange */

 /*
  * Priority/Task Attribute settings
  */
 #define FCPIO_ICMND_PTA_SIMPLE      0   /* simple task attribute */
 #define FCPIO_ICMND_PTA_HEADQ       1   /* head of queue task attribute */
 #define FCPIO_ICMND_PTA_ORDERED     2   /* ordered task attribute */
 #define FCPIO_ICMND_PTA_ACA         4   /* auto contingent allegiance */
 #define FCPIO_ICMND_PRI_SHIFT       3   /* priority field starts in bit 3 */

 /*
  * Command flags
  */
 #define FCPIO_ICMND_RDDATA      0x02    /* read data */
 #define FCPIO_ICMND_WRDATA      0x01    /* write data */

 /*
  * fcpio_icmnd_32: host -> firmware request
  *
  * used for sending out an initiator SCSI 32-byte command
  */
 struct fcpio_icmnd_32 {
 	u32   lunmap_id;              /* index into lunmap table */
 	u8    special_req_flags;      /* special exchange request flags */
 	u8    _resvd0[3];             /* reserved */
 	u32   sgl_cnt;                /* scatter-gather list count */
 	u32   sense_len;              /* sense buffer length */
 	u64   sgl_addr;               /* scatter-gather list addr */
 	u64   sense_addr;             /* sense buffer address */
 	u8    crn;                    /* SCSI Command Reference No. */
 	u8    pri_ta;                 /* SCSI Priority and Task attribute */
 	u8    _resvd1;                /* reserved: should be 0 */
 	u8    flags;                  /* command flags */
 	u8    scsi_cdb[CDB_32];       /* SCSI Cmnd Descriptor Block */
 	u32   data_len;               /* length of data expected */
 	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
 	u8    _resvd2;                /* reserved */
 	u8    d_id[3];		      /* FC vNIC only: Target D_ID */
 	u16   mss;                    /* FC vNIC only: max burst */
 	u16   _resvd3;                /* reserved */
 	u32   r_a_tov;                /* FC vNIC only: Res. Alloc Timeout */
 	u32   e_d_tov;                /* FC vNIC only: Error Detect Timeout */
 };

 /*
  * fcpio_itmf: host -> firmware request
  *
  * used for requesting the firmware to abort a request and/or send out
  * a task management function
  *
  * The t_tag field is only needed when the request type is ABT_TASK.
  */
 struct fcpio_itmf {
 	u32   lunmap_id;              /* index into lunmap table */
 	u32   tm_req;                 /* SCSI Task Management request */
 	u32   t_tag;                  /* header tag of fcpio to be aborted */
 	u32   _resvd;                 /* _reserved */
 	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
 	u8    _resvd1;                /* reserved */
 	u8    d_id[3];		      /* FC vNIC only: Target D_ID */
 	u32   r_a_tov;                /* FC vNIC only: R_A_TOV in msec */
 	u32   e_d_tov;                /* FC vNIC only: E_D_TOV in msec */
 };

 /*
  * Task Management request
  */
 enum fcpio_itmf_tm_req_type {
 	FCPIO_ITMF_ABT_TASK_TERM = 0x01,    /* abort task and terminate */
 	FCPIO_ITMF_ABT_TASK,                /* abort task and issue abts */
 	FCPIO_ITMF_ABT_TASK_SET,            /* abort task set */
 	FCPIO_ITMF_CLR_TASK_SET,            /* clear task set */
 	FCPIO_ITMF_LUN_RESET,               /* logical unit reset task mgmt */
 	FCPIO_ITMF_CLR_ACA,                 /* Clear ACA condition */
 };

 /*
  * fcpio_tdata: host -> firmware request
  *
  * used for requesting the firmware to send out a read data transfer for a
  * target command
  */
 struct fcpio_tdata {
 	u16   rx_id;                  /* FC rx_id of target command */
 	u16   flags;                  /* command flags */
 	u32   rel_offset;             /* data sequence relative offset */
 	u32   sgl_cnt;                /* scatter-gather list count */
 	u32   data_len;               /* length of data expected to send */
 	u64   sgl_addr;               /* scatter-gather list address */
 };

 /*
  * Command flags
  */
 #define FCPIO_TDATA_SCSI_RSP    0x01    /* send a scsi resp. after last frame */

 /*
  * fcpio_txrdy: host -> firmware request
  *
  * used for requesting the firmware to send out a write data transfer for a
  * target command
  */
 struct fcpio_txrdy {
 	u16   rx_id;                  /* FC rx_id of target command */
 	u16   _resvd0;                /* reserved */
 	u32   rel_offset;             /* data sequence relative offset */
 	u32   sgl_cnt;                /* scatter-gather list count */
 	u32   data_len;               /* length of data expected to send */
 	u64   sgl_addr;               /* scatter-gather list address */
 };

 /*
  * fcpio_trsp: host -> firmware request
  *
  * used for requesting the firmware to send out a response for a target
  * command
  */
 struct fcpio_trsp {
 	u16   rx_id;                  /* FC rx_id of target command */
 	u16   _resvd0;                /* reserved */
 	u32   sense_len;              /* sense data buffer length */
 	u64   sense_addr;             /* sense data buffer address */
 	u16   _resvd1;                /* reserved */
 	u8    flags;                  /* response request flags */
 	u8    scsi_status;            /* SCSI status */
 	u32   residual;               /* SCSI data residual value of I/O */
 };

 /*
  * resposnse request flags
  */
 #define FCPIO_TRSP_RESID_UNDER  0x08   /* residual is valid and is underflow */
 #define FCPIO_TRSP_RESID_OVER   0x04   /* residual is valid and is overflow */

 /*
  * fcpio_ttmf_ack: host -> firmware response
  *
  * used by the host to indicate to the firmware it has received and processed
  * the target tmf request
  */
 struct fcpio_ttmf_ack {
 	u16   rx_id;                  /* FC rx_id of target command */
 	u16   _resvd0;                /* reserved */
 	u32   tmf_status;             /* SCSI task management status */
 };

 /*
  * fcpio_tabort: host -> firmware request
  *
  * used by the host to request the firmware to abort a target request that was
  * received by the firmware
  */
 struct fcpio_tabort {
 	u16   rx_id;                  /* rx_id of the target request */
 };

 /*
  * fcpio_reset: host -> firmware request
  *
  * used by the host to signal a reset of the driver to the firmware
  * and to request firmware to clean up all outstanding I/O
  */
 struct fcpio_reset {
 	u32   _resvd;
 };

 enum fcpio_flogi_reg_format_type {
 	FCPIO_FLOGI_REG_DEF_DEST = 0,    /* Use the oui | s_id mac format */
 	FCPIO_FLOGI_REG_GW_DEST,         /* Use the fixed gateway mac */
 };

 /*
  * fcpio_flogi_reg: host -> firmware request
  *
  * fc vnic only
  * used by the host to notify the firmware of the lif's s_id
  * and destination mac address format
  */
 struct fcpio_flogi_reg {
 	u8 format;
 	u8 s_id[3];			/* FC vNIC only: Source S_ID */
 	u8 gateway_mac[ETH_ALEN];	/* Destination gateway mac */
 	u16 _resvd;
 	u32 r_a_tov;			/* R_A_TOV in msec */
 	u32 e_d_tov;			/* E_D_TOV in msec */
 };

 /*
  * fcpio_echo: host -> firmware request
  *
  * sends a heartbeat echo request to the firmware
  */
 struct fcpio_echo {
 	u32 _resvd;
 };

 /*
  * fcpio_lunmap_req: host -> firmware request
  *
  * scsi vnic only
  * sends a request to retrieve the lunmap table for scsi vnics
  */
 struct fcpio_lunmap_req {
 	u64 addr;                     /* address of the buffer */
 	u32 len;                      /* len of the buffer */
 };

 /*
  * fcpio_flogi_fip_reg: host -> firmware request
  *
  * fc vnic only
  * used by the host to notify the firmware of the lif's s_id
  * and destination mac address format
  */
 struct fcpio_flogi_fip_reg {
 	u8    _resvd0;
 	u8     s_id[3];               /* FC vNIC only: Source S_ID */
 	u8     fcf_mac[ETH_ALEN];     /* FCF Target destination mac */
 	u16   _resvd1;
 	u32   r_a_tov;                /* R_A_TOV in msec */
 	u32   e_d_tov;                /* E_D_TOV in msec */
 	u8    ha_mac[ETH_ALEN];       /* Host adapter source mac */
 	u16   _resvd2;
 };

 /*
  * Basic structure for all fcpio structures that are sent from the host to the
  * firmware.  They are 128 bytes per structure.
  */
 #define FCPIO_HOST_REQ_LEN      128     /* expected length of host requests */

 struct fcpio_host_req {
 	struct fcpio_header hdr;

 	union {
 		/*
 		 * Defines space needed for request
 		 */
 		u8 buf[FCPIO_HOST_REQ_LEN - sizeof(struct fcpio_header)];

 		/*
 		 * Initiator host requests
 		 */
 		struct fcpio_icmnd_16               icmnd_16;
 		struct fcpio_icmnd_32               icmnd_32;
 		struct fcpio_itmf                   itmf;

 		/*
 		 * Target host requests
 		 */
 		struct fcpio_tdata                  tdata;
 		struct fcpio_txrdy                  txrdy;
 		struct fcpio_trsp                   trsp;
 		struct fcpio_ttmf_ack               ttmf_ack;
 		struct fcpio_tabort                 tabort;

 		/*
 		 * Misc requests
 		 */
 		struct fcpio_reset                  reset;
 		struct fcpio_flogi_reg              flogi_reg;
 		struct fcpio_echo                   echo;
 		struct fcpio_lunmap_req             lunmap_req;
 		struct fcpio_flogi_fip_reg          flogi_fip_reg;
 	} u;
 };

 /*
  * fcpio_icmnd_cmpl: firmware -> host response
  *
  * used for sending the host a response to an initiator command
  */
 struct fcpio_icmnd_cmpl {
 	u8    _resvd0[6];             /* reserved */
 	u8    flags;                  /* response flags */
 	u8    scsi_status;            /* SCSI status */
 	u32   residual;               /* SCSI data residual length */
 	u32   sense_len;              /* SCSI sense length */
 };

 /*
  * response flags
  */
 #define FCPIO_ICMND_CMPL_RESID_UNDER    0x08    /* resid under and valid */
 #define FCPIO_ICMND_CMPL_RESID_OVER     0x04    /* resid over and valid */

 /*
  * fcpio_itmf_cmpl: firmware -> host response
  *
  * used for sending the host a response for a itmf request
  */
 struct fcpio_itmf_cmpl {
 	u32    _resvd;                /* reserved */
 };

 /*
  * fcpio_tcmnd_16: firmware -> host request
  *
  * used by the firmware to notify the host of an incoming target SCSI 16-Byte
  * request
  */
 struct fcpio_tcmnd_16 {
 	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
 	u8    crn;                    /* SCSI Command Reference No. */
 	u8    pri_ta;                 /* SCSI Priority and Task attribute */
 	u8    _resvd2;                /* reserved: should be 0 */
 	u8    flags;                  /* command flags */
 	u8    scsi_cdb[CDB_16];       /* SCSI Cmnd Descriptor Block */
 	u32   data_len;               /* length of data expected */
 	u8    _resvd1;                /* reserved */
 	u8    s_id[3];		      /* FC vNIC only: Source S_ID */
 };

 /*
  * Priority/Task Attribute settings
  */
 #define FCPIO_TCMND_PTA_SIMPLE      0   /* simple task attribute */
 #define FCPIO_TCMND_PTA_HEADQ       1   /* head of queue task attribute */
 #define FCPIO_TCMND_PTA_ORDERED     2   /* ordered task attribute */
 #define FCPIO_TCMND_PTA_ACA         4   /* auto contingent allegiance */
 #define FCPIO_TCMND_PRI_SHIFT       3   /* priority field starts in bit 3 */

 /*
  * Command flags
  */
 #define FCPIO_TCMND_RDDATA      0x02    /* read data */
 #define FCPIO_TCMND_WRDATA      0x01    /* write data */

 /*
  * fcpio_tcmnd_32: firmware -> host request
  *
  * used by the firmware to notify the host of an incoming target SCSI 32-Byte
  * request
  */
 struct fcpio_tcmnd_32 {
 	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
 	u8    crn;                    /* SCSI Command Reference No. */
 	u8    pri_ta;                 /* SCSI Priority and Task attribute */
 	u8    _resvd2;                /* reserved: should be 0 */
 	u8    flags;                  /* command flags */
 	u8    scsi_cdb[CDB_32];       /* SCSI Cmnd Descriptor Block */
 	u32   data_len;               /* length of data expected */
 	u8    _resvd0;                /* reserved */
 	u8    s_id[3];		      /* FC vNIC only: Source S_ID */
 };

 /*
  * fcpio_tdrsp_cmpl: firmware -> host response
  *
  * used by the firmware to notify the host of a response to a host target
  * command
  */
 struct fcpio_tdrsp_cmpl {
 	u16   rx_id;                  /* rx_id of the target request */
 	u16   _resvd0;                /* reserved */
 };

 /*
  * fcpio_ttmf: firmware -> host request
  *
  * used by the firmware to notify the host of an incoming task management
  * function request
  */
 struct fcpio_ttmf {
 	u8    _resvd0;                /* reserved */
 	u8    s_id[3];		      /* FC vNIC only: Source S_ID */
 	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
 	u8    crn;                    /* SCSI Command Reference No. */
 	u8    _resvd2[3];             /* reserved */
 	u32   tmf_type;               /* task management request type */
 };

 /*
  * Task Management request
  */
 #define FCPIO_TTMF_CLR_ACA      0x40    /* Clear ACA condition */
 #define FCPIO_TTMF_LUN_RESET    0x10    /* logical unit reset task mgmt */
 #define FCPIO_TTMF_CLR_TASK_SET 0x04    /* clear task set */
 #define FCPIO_TTMF_ABT_TASK_SET 0x02    /* abort task set */
 #define FCPIO_TTMF_ABT_TASK     0x01    /* abort task */

 /*
  * fcpio_tabort_cmpl: firmware -> host response
  *
  * used by the firmware to respond to a host's tabort request
  */
 struct fcpio_tabort_cmpl {
 	u16   rx_id;                  /* rx_id of the target request */
 	u16   _resvd0;                /* reserved */
 };

 /*
  * fcpio_ack: firmware -> host response
  *
  * used by firmware to notify the host of the last work request received
  */
 struct fcpio_ack {
 	u16  request_out;             /* last host entry received */
 	u16  _resvd;
 };

 /*
  * fcpio_reset_cmpl: firmware -> host response
  *
  * use by firmware to respond to the host's reset request
  */
 struct fcpio_reset_cmpl {
 	u16   vnic_id;
 };

 /*
  * fcpio_flogi_reg_cmpl: firmware -> host response
  *
  * fc vnic only
  * response to the fcpio_flogi_reg request
  */
 struct fcpio_flogi_reg_cmpl {
 	u32 _resvd;
 };

 /*
  * fcpio_echo_cmpl: firmware -> host response
  *
  * response to the fcpio_echo request
  */
 struct fcpio_echo_cmpl {
 	u32 _resvd;
 };

 /*
  * fcpio_lunmap_chng: firmware -> host notification
  *
  * scsi vnic only
  * notifies the host that the lunmap tables have changed
  */
 struct fcpio_lunmap_chng {
 	u32 _resvd;
 };

 /*
  * fcpio_lunmap_req_cmpl: firmware -> host response
  *
  * scsi vnic only
  * response for lunmap table request from the host
  */
 struct fcpio_lunmap_req_cmpl {
 	u32 _resvd;
 };

 /*
  * Basic structure for all fcpio structures that are sent from the firmware to
  * the host.  They are 64 bytes per structure.
  */
 #define FCPIO_FW_REQ_LEN        64      /* expected length of fw requests */
 struct fcpio_fw_req {
 	struct fcpio_header hdr;

 	union {
 		/*
 		 * Defines space needed for request
 		 */
 		u8 buf[FCPIO_FW_REQ_LEN - sizeof(struct fcpio_header)];

 		/*
 		 * Initiator firmware responses
 		 */
 		struct fcpio_icmnd_cmpl         icmnd_cmpl;
 		struct fcpio_itmf_cmpl          itmf_cmpl;

 		/*
 		 * Target firmware new requests
 		 */
 		struct fcpio_tcmnd_16           tcmnd_16;
 		struct fcpio_tcmnd_32           tcmnd_32;

 		/*
 		 * Target firmware responses
 		 */
 		struct fcpio_tdrsp_cmpl         tdrsp_cmpl;
 		struct fcpio_ttmf               ttmf;
 		struct fcpio_tabort_cmpl        tabort_cmpl;

 		/*
 		 * Firmware response to work received
 		 */
 		struct fcpio_ack                ack;

 		/*
 		 * Misc requests
 		 */
 		struct fcpio_reset_cmpl         reset_cmpl;
 		struct fcpio_flogi_reg_cmpl     flogi_reg_cmpl;
 		struct fcpio_echo_cmpl          echo_cmpl;
 		struct fcpio_lunmap_chng        lunmap_chng;
 		struct fcpio_lunmap_req_cmpl    lunmap_req_cmpl;
 	} u;
 };

 /*
  * Access routines to encode and decode the color bit, which is the most
  * significant bit of the MSB of the structure
  */
 static inline void fcpio_color_enc(struct fcpio_fw_req *fw_req, u8 color)
 {
 	u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1;

 	if (color)
 		*c |= 0x80;
 	else
 		*c &= ~0x80;
 }

 static inline void fcpio_color_dec(struct fcpio_fw_req *fw_req, u8 *color)
 {
 	u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1;

 	*color = *c >> 7;

 	/*
 	 * Make sure color bit is read from desc *before* other fields
 	 * are read from desc.  Hardware guarantees color bit is last
 	 * bit (byte) written.  Adding the rmb() prevents the compiler
 	 * and/or CPU from reordering the reads which would potentially
 	 * result in reading stale values.
 	 */

 	rmb();

 }

 /*
  * Lunmap table entry for scsi vnics
  */
 #define FCPIO_LUNMAP_TABLE_SIZE     256
 #define FCPIO_FLAGS_LUNMAP_VALID    0x80
 #define FCPIO_FLAGS_BOOT            0x01
 struct fcpio_lunmap_entry {
 	u8    bus;
 	u8    target;
 	u8    lun;
 	u8    path_cnt;
 	u16   flags;
 	u16   update_cnt;
 };

 struct fcpio_lunmap_tbl {
 	u32                   update_cnt;
 	struct fcpio_lunmap_entry   lunmaps[FCPIO_LUNMAP_TABLE_SIZE];
 };

 #endif /* _FCPIO_H_ */
	/*
	* Copyright 2008 Cisco Systems, Inc. All rights reserved.
	* Copyright 2007 Nuova Systems, Inc. All rights reserved.
	*
	* This program is free software; you may redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; version 2 of the License.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
	* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
	* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
	* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
	* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
	* SOFTWARE.
	*/
	#ifndef _FCPIO_H_
	#define _FCPIO_H_

	#include <linux/if_ether.h>

	/*
	* This header file includes all of the data structures used for
	* communication by the host driver to the fcp firmware.
	*/

	/*
	* Exchange and sequence id space allocated to the host driver
	*/
	#define FCPIO_HOST_EXCH_RANGE_START 0x1000
	#define FCPIO_HOST_EXCH_RANGE_END 0x1fff
	#define FCPIO_HOST_SEQ_ID_RANGE_START 0x80
	#define FCPIO_HOST_SEQ_ID_RANGE_END 0xff

	/*
	* Command entry type
	*/
	enum fcpio_type {
	/*
	* Initiator request types
	*/
	FCPIO_ICMND_16 = 0x1,
	FCPIO_ICMND_32,
	FCPIO_ICMND_CMPL,
	FCPIO_ITMF,
	FCPIO_ITMF_CMPL,

	/*
	* Target request types
	*/
	FCPIO_TCMND_16 = 0x11,
	FCPIO_TCMND_32,
	FCPIO_TDATA,
	FCPIO_TXRDY,
	FCPIO_TRSP,
	FCPIO_TDRSP_CMPL,
	FCPIO_TTMF,
	FCPIO_TTMF_ACK,
	FCPIO_TABORT,
	FCPIO_TABORT_CMPL,

	/*
	* Misc request types
	*/
	FCPIO_ACK = 0x20,
	FCPIO_RESET,
	FCPIO_RESET_CMPL,
	FCPIO_FLOGI_REG,
	FCPIO_FLOGI_REG_CMPL,
	FCPIO_ECHO,
	FCPIO_ECHO_CMPL,
	FCPIO_LUNMAP_CHNG,
	FCPIO_LUNMAP_REQ,
	FCPIO_LUNMAP_REQ_CMPL,
	FCPIO_FLOGI_FIP_REG,
	FCPIO_FLOGI_FIP_REG_CMPL,
	};

	/*
	* Header status codes from the firmware
	*/
	enum fcpio_status {
	FCPIO_SUCCESS = 0, /* request was successful */

	/*
	* If a request to the firmware is rejected, the original request
	* header will be returned with the status set to one of the following:
	*/
	FCPIO_INVALID_HEADER, /* header contains invalid data */
	FCPIO_OUT_OF_RESOURCE, /* out of resources to complete request */
	FCPIO_INVALID_PARAM, /* some parameter in request is invalid */
	FCPIO_REQ_NOT_SUPPORTED, /* request type is not supported */
	FCPIO_IO_NOT_FOUND, /* requested I/O was not found */

	/*
	* Once a request is processed, the firmware will usually return
	* a cmpl message type. In cases where errors occurred,
	* the header status field would be filled in with one of the following:
	*/
	FCPIO_ABORTED = 0x41, /* request was aborted */
	FCPIO_TIMEOUT, /* request was timed out */
	FCPIO_SGL_INVALID, /* request was aborted due to sgl error */
	FCPIO_MSS_INVALID, /* request was aborted due to mss error */
	FCPIO_DATA_CNT_MISMATCH, /* recv/sent more/less data than exp. */
	FCPIO_FW_ERR, /* request was terminated due to fw error */
	FCPIO_ITMF_REJECTED, /* itmf req was rejected by remote node */
	FCPIO_ITMF_FAILED, /* itmf req was failed by remote node */
	FCPIO_ITMF_INCORRECT_LUN, /* itmf req targeted incorrect LUN */
	FCPIO_CMND_REJECTED, /* request was invalid and rejected */
	FCPIO_NO_PATH_AVAIL, /* no paths to the lun was available */
	FCPIO_PATH_FAILED, /* i/o sent to current path failed */
	FCPIO_LUNMAP_CHNG_PEND, /* i/o rejected due to lunmap change */
	};

	/*
	* The header command tag. All host requests will use the "tag" field
	* to mark commands with a unique tag. When the firmware responds to
	* a host request, it will copy the tag field into the response.
	*
	* The only firmware requests that will use the rx_id/ox_id fields instead
	* of the tag field will be the target command and target task management
	* requests. These two requests do not have corresponding host requests
	* since they come directly from the FC initiator on the network.
	*/
	struct fcpio_tag {
	union {
	u32 req_id;
	struct {
	u16 rx_id;
	u16 ox_id;
	} ex_id;
	} u;
	};

	static inline void
	fcpio_tag_id_enc(struct fcpio_tag *tag, u32 id)
	{
	tag->u.req_id = id;
	}

	static inline void
	fcpio_tag_id_dec(struct fcpio_tag tag, u32 id)
	{
	*id = tag->u.req_id;
	}

	static inline void
	fcpio_tag_exid_enc(struct fcpio_tag *tag, u16 ox_id, u16 rx_id)
	{
	tag->u.ex_id.rx_id = rx_id;
	tag->u.ex_id.ox_id = ox_id;
	}

	static inline void
	fcpio_tag_exid_dec(struct fcpio_tag tag, u16 ox_id, u16 *rx_id)
	{
	*rx_id = tag->u.ex_id.rx_id;
	*ox_id = tag->u.ex_id.ox_id;
	}

	/*
	* The header for an fcpio request, whether from the firmware or from the
	* host driver
	*/
	struct fcpio_header {
	u8 type; /* enum fcpio_type */
	u8 status; /* header status entry */
	u16 _resvd; /* reserved */
	struct fcpio_tag tag; /* header tag */
	};

	static inline void
	fcpio_header_enc(struct fcpio_header *hdr,
	u8 type, u8 status,
	struct fcpio_tag tag)
	{
	hdr->type = type;
	hdr->status = status;
	hdr->_resvd = 0;
	hdr->tag = tag;
	}

	static inline void
	fcpio_header_dec(struct fcpio_header *hdr,
	u8 type, u8 status,
	struct fcpio_tag *tag)
	{
	*type = hdr->type;
	*status = hdr->status;
	*tag = hdr->tag;
	}

	#define CDB_16 16
	#define CDB_32 32
	#define LUN_ADDRESS 8

	/*
	* fcpio_icmnd_16: host -> firmware request
	*
	* used for sending out an initiator SCSI 16-byte command
	*/
	struct fcpio_icmnd_16 {
	u32 lunmap_id; /* index into lunmap table */
	u8 special_req_flags; /* special exchange request flags */
	u8 _resvd0[3]; /* reserved */
	u32 sgl_cnt; /* scatter-gather list count */
	u32 sense_len; /* sense buffer length */
	u64 sgl_addr; /* scatter-gather list addr */
	u64 sense_addr; /* sense buffer address */
	u8 crn; /* SCSI Command Reference No. */
	u8 pri_ta; /* SCSI Priority and Task attribute */
	u8 _resvd1; /* reserved: should be 0 */
	u8 flags; /* command flags */
	u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */
	u32 data_len; /* length of data expected */
	u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
	u8 _resvd2; /* reserved */
	u8 d_id[3]; /* FC vNIC only: Target D_ID */
	u16 mss; /* FC vNIC only: max burst */
	u16 _resvd3; /* reserved */
	u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */
	u32 e_d_tov; /* FC vNIC only: Err Detect Timeout */
	};

	/*
	* Special request flags
	*/
	#define FCPIO_ICMND_SRFLAG_RETRY 0x01 /* Enable Retry handling on exchange */

	/*
	* Priority/Task Attribute settings
	*/
	#define FCPIO_ICMND_PTA_SIMPLE 0 /* simple task attribute */
	#define FCPIO_ICMND_PTA_HEADQ 1 /* head of queue task attribute */
	#define FCPIO_ICMND_PTA_ORDERED 2 /* ordered task attribute */
	#define FCPIO_ICMND_PTA_ACA 4 /* auto contingent allegiance */
	#define FCPIO_ICMND_PRI_SHIFT 3 /* priority field starts in bit 3 */

	/*
	* Command flags
	*/
	#define FCPIO_ICMND_RDDATA 0x02 /* read data */
	#define FCPIO_ICMND_WRDATA 0x01 /* write data */

	/*
	* fcpio_icmnd_32: host -> firmware request
	*
	* used for sending out an initiator SCSI 32-byte command
	*/
	struct fcpio_icmnd_32 {
	u32 lunmap_id; /* index into lunmap table */
	u8 special_req_flags; /* special exchange request flags */
	u8 _resvd0[3]; /* reserved */
	u32 sgl_cnt; /* scatter-gather list count */
	u32 sense_len; /* sense buffer length */
	u64 sgl_addr; /* scatter-gather list addr */
	u64 sense_addr; /* sense buffer address */
	u8 crn; /* SCSI Command Reference No. */
	u8 pri_ta; /* SCSI Priority and Task attribute */
	u8 _resvd1; /* reserved: should be 0 */
	u8 flags; /* command flags */
	u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */
	u32 data_len; /* length of data expected */
	u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
	u8 _resvd2; /* reserved */
	u8 d_id[3]; /* FC vNIC only: Target D_ID */
	u16 mss; /* FC vNIC only: max burst */
	u16 _resvd3; /* reserved */
	u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */
	u32 e_d_tov; /* FC vNIC only: Error Detect Timeout */
	};

	/*
	* fcpio_itmf: host -> firmware request
	*
	* used for requesting the firmware to abort a request and/or send out
	* a task management function
	*
	* The t_tag field is only needed when the request type is ABT_TASK.
	*/
	struct fcpio_itmf {
	u32 lunmap_id; /* index into lunmap table */
	u32 tm_req; /* SCSI Task Management request */
	u32 t_tag; /* header tag of fcpio to be aborted */
	u32 _resvd; /* _reserved */
	u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
	u8 _resvd1; /* reserved */
	u8 d_id[3]; /* FC vNIC only: Target D_ID */
	u32 r_a_tov; /* FC vNIC only: R_A_TOV in msec */
	u32 e_d_tov; /* FC vNIC only: E_D_TOV in msec */
	};

	/*
	* Task Management request
	*/
	enum fcpio_itmf_tm_req_type {
	FCPIO_ITMF_ABT_TASK_TERM = 0x01, /* abort task and terminate */
	FCPIO_ITMF_ABT_TASK, /* abort task and issue abts */
	FCPIO_ITMF_ABT_TASK_SET, /* abort task set */
	FCPIO_ITMF_CLR_TASK_SET, /* clear task set */
	FCPIO_ITMF_LUN_RESET, /* logical unit reset task mgmt */
	FCPIO_ITMF_CLR_ACA, /* Clear ACA condition */
	};

	/*
	* fcpio_tdata: host -> firmware request
	*
	* used for requesting the firmware to send out a read data transfer for a
	* target command
	*/
	struct fcpio_tdata {
	u16 rx_id; /* FC rx_id of target command */
	u16 flags; /* command flags */
	u32 rel_offset; /* data sequence relative offset */
	u32 sgl_cnt; /* scatter-gather list count */
	u32 data_len; /* length of data expected to send */
	u64 sgl_addr; /* scatter-gather list address */
	};

	/*
	* Command flags
	*/
	#define FCPIO_TDATA_SCSI_RSP 0x01 /* send a scsi resp. after last frame */

	/*
	* fcpio_txrdy: host -> firmware request
	*
	* used for requesting the firmware to send out a write data transfer for a
	* target command
	*/
	struct fcpio_txrdy {
	u16 rx_id; /* FC rx_id of target command */
	u16 _resvd0; /* reserved */
	u32 rel_offset; /* data sequence relative offset */
	u32 sgl_cnt; /* scatter-gather list count */
	u32 data_len; /* length of data expected to send */
	u64 sgl_addr; /* scatter-gather list address */
	};

	/*
	* fcpio_trsp: host -> firmware request
	*
	* used for requesting the firmware to send out a response for a target
	* command
	*/
	struct fcpio_trsp {
	u16 rx_id; /* FC rx_id of target command */
	u16 _resvd0; /* reserved */
	u32 sense_len; /* sense data buffer length */
	u64 sense_addr; /* sense data buffer address */
	u16 _resvd1; /* reserved */
	u8 flags; /* response request flags */
	u8 scsi_status; /* SCSI status */
	u32 residual; /* SCSI data residual value of I/O */
	};

	/*
	* resposnse request flags
	*/
	#define FCPIO_TRSP_RESID_UNDER 0x08 /* residual is valid and is underflow */
	#define FCPIO_TRSP_RESID_OVER 0x04 /* residual is valid and is overflow */

	/*
	* fcpio_ttmf_ack: host -> firmware response
	*
	* used by the host to indicate to the firmware it has received and processed
	* the target tmf request
	*/
	struct fcpio_ttmf_ack {
	u16 rx_id; /* FC rx_id of target command */
	u16 _resvd0; /* reserved */
	u32 tmf_status; /* SCSI task management status */
	};

	/*
	* fcpio_tabort: host -> firmware request
	*
	* used by the host to request the firmware to abort a target request that was
	* received by the firmware
	*/
	struct fcpio_tabort {
	u16 rx_id; /* rx_id of the target request */
	};

	/*
	* fcpio_reset: host -> firmware request
	*
	* used by the host to signal a reset of the driver to the firmware
	* and to request firmware to clean up all outstanding I/O
	*/
	struct fcpio_reset {
	u32 _resvd;
	};

	enum fcpio_flogi_reg_format_type {
	FCPIO_FLOGI_REG_DEF_DEST = 0, /* Use the oui \| s_id mac format */
	FCPIO_FLOGI_REG_GW_DEST, /* Use the fixed gateway mac */
	};

	/*
	* fcpio_flogi_reg: host -> firmware request
	*
	* fc vnic only
	* used by the host to notify the firmware of the lif's s_id
	* and destination mac address format
	*/
	struct fcpio_flogi_reg {
	u8 format;
	u8 s_id[3]; /* FC vNIC only: Source S_ID */
	u8 gateway_mac[ETH_ALEN]; /* Destination gateway mac */
	u16 _resvd;
	u32 r_a_tov; /* R_A_TOV in msec */
	u32 e_d_tov; /* E_D_TOV in msec */
	};

	/*
	* fcpio_echo: host -> firmware request
	*
	* sends a heartbeat echo request to the firmware
	*/
	struct fcpio_echo {
	u32 _resvd;
	};

	/*
	* fcpio_lunmap_req: host -> firmware request
	*
	* scsi vnic only
	* sends a request to retrieve the lunmap table for scsi vnics
	*/
	struct fcpio_lunmap_req {
	u64 addr; /* address of the buffer */
	u32 len; /* len of the buffer */
	};

	/*
	* fcpio_flogi_fip_reg: host -> firmware request
	*
	* fc vnic only
	* used by the host to notify the firmware of the lif's s_id
	* and destination mac address format
	*/
	struct fcpio_flogi_fip_reg {
	u8 _resvd0;
	u8 s_id[3]; /* FC vNIC only: Source S_ID */
	u8 fcf_mac[ETH_ALEN]; /* FCF Target destination mac */
	u16 _resvd1;
	u32 r_a_tov; /* R_A_TOV in msec */
	u32 e_d_tov; /* E_D_TOV in msec */
	u8 ha_mac[ETH_ALEN]; /* Host adapter source mac */
	u16 _resvd2;
	};

	/*
	* Basic structure for all fcpio structures that are sent from the host to the
	* firmware. They are 128 bytes per structure.
	*/
	#define FCPIO_HOST_REQ_LEN 128 /* expected length of host requests */

	struct fcpio_host_req {
	struct fcpio_header hdr;

	union {
	/*
	* Defines space needed for request
	*/
	u8 buf[FCPIO_HOST_REQ_LEN - sizeof(struct fcpio_header)];

	/*
	* Initiator host requests
	*/
	struct fcpio_icmnd_16 icmnd_16;
	struct fcpio_icmnd_32 icmnd_32;
	struct fcpio_itmf itmf;

	/*
	* Target host requests
	*/
	struct fcpio_tdata tdata;
	struct fcpio_txrdy txrdy;
	struct fcpio_trsp trsp;
	struct fcpio_ttmf_ack ttmf_ack;
	struct fcpio_tabort tabort;

	/*
	* Misc requests
	*/
	struct fcpio_reset reset;
	struct fcpio_flogi_reg flogi_reg;
	struct fcpio_echo echo;
	struct fcpio_lunmap_req lunmap_req;
	struct fcpio_flogi_fip_reg flogi_fip_reg;
	} u;
	};

	/*
	* fcpio_icmnd_cmpl: firmware -> host response
	*
	* used for sending the host a response to an initiator command
	*/
	struct fcpio_icmnd_cmpl {
	u8 _resvd0[6]; /* reserved */
	u8 flags; /* response flags */
	u8 scsi_status; /* SCSI status */
	u32 residual; /* SCSI data residual length */
	u32 sense_len; /* SCSI sense length */
	};

	/*
	* response flags
	*/
	#define FCPIO_ICMND_CMPL_RESID_UNDER 0x08 /* resid under and valid */
	#define FCPIO_ICMND_CMPL_RESID_OVER 0x04 /* resid over and valid */

	/*
	* fcpio_itmf_cmpl: firmware -> host response
	*
	* used for sending the host a response for a itmf request
	*/
	struct fcpio_itmf_cmpl {
	u32 _resvd; /* reserved */
	};

	/*
	* fcpio_tcmnd_16: firmware -> host request
	*
	* used by the firmware to notify the host of an incoming target SCSI 16-Byte
	* request
	*/
	struct fcpio_tcmnd_16 {
	u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
	u8 crn; /* SCSI Command Reference No. */
	u8 pri_ta; /* SCSI Priority and Task attribute */
	u8 _resvd2; /* reserved: should be 0 */
	u8 flags; /* command flags */
	u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */
	u32 data_len; /* length of data expected */
	u8 _resvd1; /* reserved */
	u8 s_id[3]; /* FC vNIC only: Source S_ID */
	};

	/*
	* Priority/Task Attribute settings
	*/
	#define FCPIO_TCMND_PTA_SIMPLE 0 /* simple task attribute */
	#define FCPIO_TCMND_PTA_HEADQ 1 /* head of queue task attribute */
	#define FCPIO_TCMND_PTA_ORDERED 2 /* ordered task attribute */
	#define FCPIO_TCMND_PTA_ACA 4 /* auto contingent allegiance */
	#define FCPIO_TCMND_PRI_SHIFT 3 /* priority field starts in bit 3 */

	/*
	* Command flags
	*/
	#define FCPIO_TCMND_RDDATA 0x02 /* read data */
	#define FCPIO_TCMND_WRDATA 0x01 /* write data */

	/*
	* fcpio_tcmnd_32: firmware -> host request
	*
	* used by the firmware to notify the host of an incoming target SCSI 32-Byte
	* request
	*/
	struct fcpio_tcmnd_32 {
	u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
	u8 crn; /* SCSI Command Reference No. */
	u8 pri_ta; /* SCSI Priority and Task attribute */
	u8 _resvd2; /* reserved: should be 0 */
	u8 flags; /* command flags */
	u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */
	u32 data_len; /* length of data expected */
	u8 _resvd0; /* reserved */
	u8 s_id[3]; /* FC vNIC only: Source S_ID */
	};

	/*
	* fcpio_tdrsp_cmpl: firmware -> host response
	*
	* used by the firmware to notify the host of a response to a host target
	* command
	*/
	struct fcpio_tdrsp_cmpl {
	u16 rx_id; /* rx_id of the target request */
	u16 _resvd0; /* reserved */
	};

	/*
	* fcpio_ttmf: firmware -> host request
	*
	* used by the firmware to notify the host of an incoming task management
	* function request
	*/
	struct fcpio_ttmf {
	u8 _resvd0; /* reserved */
	u8 s_id[3]; /* FC vNIC only: Source S_ID */
	u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
	u8 crn; /* SCSI Command Reference No. */
	u8 _resvd2[3]; /* reserved */
	u32 tmf_type; /* task management request type */
	};

	/*
	* Task Management request
	*/
	#define FCPIO_TTMF_CLR_ACA 0x40 /* Clear ACA condition */
	#define FCPIO_TTMF_LUN_RESET 0x10 /* logical unit reset task mgmt */
	#define FCPIO_TTMF_CLR_TASK_SET 0x04 /* clear task set */
	#define FCPIO_TTMF_ABT_TASK_SET 0x02 /* abort task set */
	#define FCPIO_TTMF_ABT_TASK 0x01 /* abort task */

	/*
	* fcpio_tabort_cmpl: firmware -> host response
	*
	* used by the firmware to respond to a host's tabort request
	*/
	struct fcpio_tabort_cmpl {
	u16 rx_id; /* rx_id of the target request */
	u16 _resvd0; /* reserved */
	};

	/*
	* fcpio_ack: firmware -> host response
	*
	* used by firmware to notify the host of the last work request received
	*/
	struct fcpio_ack {
	u16 request_out; /* last host entry received */
	u16 _resvd;
	};

	/*
	* fcpio_reset_cmpl: firmware -> host response
	*
	* use by firmware to respond to the host's reset request
	*/
	struct fcpio_reset_cmpl {
	u16 vnic_id;
	};

	/*
	* fcpio_flogi_reg_cmpl: firmware -> host response
	*
	* fc vnic only
	* response to the fcpio_flogi_reg request
	*/
	struct fcpio_flogi_reg_cmpl {
	u32 _resvd;
	};

	/*
	* fcpio_echo_cmpl: firmware -> host response
	*
	* response to the fcpio_echo request
	*/
	struct fcpio_echo_cmpl {
	u32 _resvd;
	};

	/*
	* fcpio_lunmap_chng: firmware -> host notification
	*
	* scsi vnic only
	* notifies the host that the lunmap tables have changed
	*/
	struct fcpio_lunmap_chng {
	u32 _resvd;
	};

	/*
	* fcpio_lunmap_req_cmpl: firmware -> host response
	*
	* scsi vnic only
	* response for lunmap table request from the host
	*/
	struct fcpio_lunmap_req_cmpl {
	u32 _resvd;
	};

	/*
	* Basic structure for all fcpio structures that are sent from the firmware to
	* the host. They are 64 bytes per structure.
	*/
	#define FCPIO_FW_REQ_LEN 64 /* expected length of fw requests */
	struct fcpio_fw_req {
	struct fcpio_header hdr;

	union {
	/*
	* Defines space needed for request
	*/
	u8 buf[FCPIO_FW_REQ_LEN - sizeof(struct fcpio_header)];

	/*
	* Initiator firmware responses
	*/
	struct fcpio_icmnd_cmpl icmnd_cmpl;
	struct fcpio_itmf_cmpl itmf_cmpl;

	/*
	* Target firmware new requests
	*/
	struct fcpio_tcmnd_16 tcmnd_16;
	struct fcpio_tcmnd_32 tcmnd_32;

	/*
	* Target firmware responses
	*/
	struct fcpio_tdrsp_cmpl tdrsp_cmpl;
	struct fcpio_ttmf ttmf;
	struct fcpio_tabort_cmpl tabort_cmpl;

	/*
	* Firmware response to work received
	*/
	struct fcpio_ack ack;

	/*
	* Misc requests
	*/
	struct fcpio_reset_cmpl reset_cmpl;
	struct fcpio_flogi_reg_cmpl flogi_reg_cmpl;
	struct fcpio_echo_cmpl echo_cmpl;
	struct fcpio_lunmap_chng lunmap_chng;
	struct fcpio_lunmap_req_cmpl lunmap_req_cmpl;
	} u;
	};

	/*
	* Access routines to encode and decode the color bit, which is the most
	* significant bit of the MSB of the structure
	*/
	static inline void fcpio_color_enc(struct fcpio_fw_req *fw_req, u8 color)
	{
	u8 c = ((u8 ) fw_req) + sizeof(struct fcpio_fw_req) - 1;

	if (color)
	*c \|= 0x80;
	else
	*c &= ~0x80;
	}

	static inline void fcpio_color_dec(struct fcpio_fw_req fw_req, u8 color)
	{
	u8 c = ((u8 ) fw_req) + sizeof(struct fcpio_fw_req) - 1;

	color = c >> 7;

	/*
	* Make sure color bit is read from desc before other fields
	* are read from desc. Hardware guarantees color bit is last
	* bit (byte) written. Adding the rmb() prevents the compiler
	* and/or CPU from reordering the reads which would potentially
	* result in reading stale values.
	*/

	rmb();

	}

	/*
	* Lunmap table entry for scsi vnics
	*/
	#define FCPIO_LUNMAP_TABLE_SIZE 256
	#define FCPIO_FLAGS_LUNMAP_VALID 0x80
	#define FCPIO_FLAGS_BOOT 0x01
	struct fcpio_lunmap_entry {
	u8 bus;
	u8 target;
	u8 lun;
	u8 path_cnt;
	u16 flags;
	u16 update_cnt;
	};

	struct fcpio_lunmap_tbl {
	u32 update_cnt;
	struct fcpio_lunmap_entry lunmaps[FCPIO_LUNMAP_TABLE_SIZE];
	};

	#endif /* _FCPIO_H_ */