drivers/i2c/busses/i2c-sis96x.c - android_kernel_htc_msm8960 - Gitiles

 /*
     Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com>

     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.

     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.

     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

 /*
     This module must be considered BETA unless and until
     the chipset manufacturer releases a datasheet.
     The register definitions are based on the SiS630.

     This module relies on quirk_sis_96x_smbus (drivers/pci/quirks.c)
     for just about every machine for which users have reported.
     If this module isn't detecting your 96x south bridge, have a
     look there.

     We assume there can only be one SiS96x with one SMBus interface.
 */

 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/stddef.h>
 #include <linux/ioport.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
 #include <asm/io.h>

 /* base address register in PCI config space */
 #define SIS96x_BAR 0x04

 /* SiS96x SMBus registers */
 #define SMB_STS      0x00
 #define SMB_EN       0x01
 #define SMB_CNT      0x02
 #define SMB_HOST_CNT 0x03
 #define SMB_ADDR     0x04
 #define SMB_CMD      0x05
 #define SMB_PCOUNT   0x06
 #define SMB_COUNT    0x07
 #define SMB_BYTE     0x08
 #define SMB_DEV_ADDR 0x10
 #define SMB_DB0      0x11
 #define SMB_DB1      0x12
 #define SMB_SAA      0x13

 /* register count for request_region */
 #define SMB_IOSIZE 0x20

 /* Other settings */
 #define MAX_TIMEOUT 500

 /* SiS96x SMBus constants */
 #define SIS96x_QUICK      0x00
 #define SIS96x_BYTE       0x01
 #define SIS96x_BYTE_DATA  0x02
 #define SIS96x_WORD_DATA  0x03
 #define SIS96x_PROC_CALL  0x04
 #define SIS96x_BLOCK_DATA 0x05

 static struct pci_driver sis96x_driver;
 static struct i2c_adapter sis96x_adapter;
 static u16 sis96x_smbus_base;

 static inline u8 sis96x_read(u8 reg)
 {
 	return inb(sis96x_smbus_base + reg) ;
 }

 static inline void sis96x_write(u8 reg, u8 data)
 {
 	outb(data, sis96x_smbus_base + reg) ;
 }

 /* Execute a SMBus transaction.
    int size is from SIS96x_QUICK to SIS96x_BLOCK_DATA
  */
 static int sis96x_transaction(int size)
 {
 	int temp;
 	int result = 0;
 	int timeout = 0;

 	dev_dbg(&sis96x_adapter.dev, "SMBus transaction %d\n", size);

 	/* Make sure the SMBus host is ready to start transmitting */
 	if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {

 		dev_dbg(&sis96x_adapter.dev, "SMBus busy (0x%02x). "
 			"Resetting...\n", temp);

 		/* kill the transaction */
 		sis96x_write(SMB_HOST_CNT, 0x20);

 		/* check it again */
 		if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {
 			dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp);
 			return -EBUSY;
 		} else {
 			dev_dbg(&sis96x_adapter.dev, "Successful\n");
 		}
 	}

 	/* Turn off timeout interrupts, set fast host clock */
 	sis96x_write(SMB_CNT, 0x20);

 	/* clear all (sticky) status flags */
 	temp = sis96x_read(SMB_STS);
 	sis96x_write(SMB_STS, temp & 0x1e);

 	/* start the transaction by setting bit 4 and size bits */
 	sis96x_write(SMB_HOST_CNT, 0x10 | (size & 0x07));

 	/* We will always wait for a fraction of a second! */
 	do {
 		msleep(1);
 		temp = sis96x_read(SMB_STS);
 	} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));

 	/* If the SMBus is still busy, we give up */
 	if (timeout >= MAX_TIMEOUT) {
 		dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
 		result = -ETIMEDOUT;
 	}

 	/* device error - probably missing ACK */
 	if (temp & 0x02) {
 		dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n");
 		result = -ENXIO;
 	}

 	/* bus collision */
 	if (temp & 0x04) {
 		dev_dbg(&sis96x_adapter.dev, "Bus collision!\n");
 		result = -EIO;
 	}

 	/* Finish up by resetting the bus */
 	sis96x_write(SMB_STS, temp);
 	if ((temp = sis96x_read(SMB_STS))) {
 		dev_dbg(&sis96x_adapter.dev, "Failed reset at "
 			"end of transaction! (0x%02x)\n", temp);
 	}

 	return result;
 }

 /* Return negative errno on error. */
 static s32 sis96x_access(struct i2c_adapter * adap, u16 addr,
 			 unsigned short flags, char read_write,
 			 u8 command, int size, union i2c_smbus_data * data)
 {
 	int status;

 	switch (size) {
 	case I2C_SMBUS_QUICK:
 		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
 		size = SIS96x_QUICK;
 		break;

 	case I2C_SMBUS_BYTE:
 		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
 		if (read_write == I2C_SMBUS_WRITE)
 			sis96x_write(SMB_CMD, command);
 		size = SIS96x_BYTE;
 		break;

 	case I2C_SMBUS_BYTE_DATA:
 		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
 		sis96x_write(SMB_CMD, command);
 		if (read_write == I2C_SMBUS_WRITE)
 			sis96x_write(SMB_BYTE, data->byte);
 		size = SIS96x_BYTE_DATA;
 		break;

 	case I2C_SMBUS_PROC_CALL:
 	case I2C_SMBUS_WORD_DATA:
 		sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
 		sis96x_write(SMB_CMD, command);
 		if (read_write == I2C_SMBUS_WRITE) {
 			sis96x_write(SMB_BYTE, data->word & 0xff);
 			sis96x_write(SMB_BYTE + 1, (data->word & 0xff00) >> 8);
 		}
 		size = (size == I2C_SMBUS_PROC_CALL ?
 			SIS96x_PROC_CALL : SIS96x_WORD_DATA);
 		break;

 	default:
 		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
 		return -EOPNOTSUPP;
 	}

 	status = sis96x_transaction(size);
 	if (status)
 		return status;

 	if ((size != SIS96x_PROC_CALL) &&
 		((read_write == I2C_SMBUS_WRITE) || (size == SIS96x_QUICK)))
 		return 0;

 	switch (size) {
 	case SIS96x_BYTE:
 	case SIS96x_BYTE_DATA:
 		data->byte = sis96x_read(SMB_BYTE);
 		break;

 	case SIS96x_WORD_DATA:
 	case SIS96x_PROC_CALL:
 		data->word = sis96x_read(SMB_BYTE) +
 				(sis96x_read(SMB_BYTE + 1) << 8);
 		break;
 	}
 	return 0;
 }

 static u32 sis96x_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
 	    I2C_FUNC_SMBUS_PROC_CALL;
 }

 static const struct i2c_algorithm smbus_algorithm = {
 	.smbus_xfer	= sis96x_access,
 	.functionality	= sis96x_func,
 };

 static struct i2c_adapter sis96x_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };

 static struct pci_device_id sis96x_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_SMBUS) },
 	{ 0, }
 };

 MODULE_DEVICE_TABLE (pci, sis96x_ids);

 static int __devinit sis96x_probe(struct pci_dev *dev,
 				const struct pci_device_id *id)
 {
 	u16 ww = 0;
 	int retval;

 	if (sis96x_smbus_base) {
 		dev_err(&dev->dev, "Only one device supported.\n");
 		return -EBUSY;
 	}

 	pci_read_config_word(dev, PCI_CLASS_DEVICE, &ww);
 	if (PCI_CLASS_SERIAL_SMBUS != ww) {
 		dev_err(&dev->dev, "Unsupported device class 0x%04x!\n", ww);
 		return -ENODEV;
 	}

 	sis96x_smbus_base = pci_resource_start(dev, SIS96x_BAR);
 	if (!sis96x_smbus_base) {
 		dev_err(&dev->dev, "SiS96x SMBus base address "
 			"not initialized!\n");
 		return -EINVAL;
 	}
 	dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n",
 			sis96x_smbus_base);

 	retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]);
 	if (retval)
 		return retval;

 	/* Everything is happy, let's grab the memory and set things up. */
 	if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
 			    sis96x_driver.name)) {
 		dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x "
 			"already in use!\n", sis96x_smbus_base,
 			sis96x_smbus_base + SMB_IOSIZE - 1);

 		sis96x_smbus_base = 0;
 		return -EINVAL;
 	}

 	/* set up the sysfs linkage to our parent device */
 	sis96x_adapter.dev.parent = &dev->dev;

 	snprintf(sis96x_adapter.name, sizeof(sis96x_adapter.name),
 		"SiS96x SMBus adapter at 0x%04x", sis96x_smbus_base);

 	if ((retval = i2c_add_adapter(&sis96x_adapter))) {
 		dev_err(&dev->dev, "Couldn't register adapter!\n");
 		release_region(sis96x_smbus_base, SMB_IOSIZE);
 		sis96x_smbus_base = 0;
 	}

 	return retval;
 }

 static void __devexit sis96x_remove(struct pci_dev *dev)
 {
 	if (sis96x_smbus_base) {
 		i2c_del_adapter(&sis96x_adapter);
 		release_region(sis96x_smbus_base, SMB_IOSIZE);
 		sis96x_smbus_base = 0;
 	}
 }

 static struct pci_driver sis96x_driver = {
 	.name		= "sis96x_smbus",
 	.id_table	= sis96x_ids,
 	.probe		= sis96x_probe,
 	.remove		= __devexit_p(sis96x_remove),
 };

 static int __init i2c_sis96x_init(void)
 {
 	return pci_register_driver(&sis96x_driver);
 }

 static void __exit i2c_sis96x_exit(void)
 {
 	pci_unregister_driver(&sis96x_driver);
 }

 MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
 MODULE_DESCRIPTION("SiS96x SMBus driver");
 MODULE_LICENSE("GPL");

 /* Register initialization functions using helper macros */
 module_init(i2c_sis96x_init);
 module_exit(i2c_sis96x_exit);
	/*
	Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com>

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the Free Software
	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	/*
	This module must be considered BETA unless and until
	the chipset manufacturer releases a datasheet.
	The register definitions are based on the SiS630.

	This module relies on quirk_sis_96x_smbus (drivers/pci/quirks.c)
	for just about every machine for which users have reported.
	If this module isn't detecting your 96x south bridge, have a
	look there.

	We assume there can only be one SiS96x with one SMBus interface.
	*/

	#include <linux/module.h>
	#include <linux/pci.h>
	#include <linux/kernel.h>
	#include <linux/delay.h>
	#include <linux/stddef.h>
	#include <linux/ioport.h>
	#include <linux/i2c.h>
	#include <linux/init.h>
	#include <linux/acpi.h>
	#include <asm/io.h>

	/* base address register in PCI config space */
	#define SIS96x_BAR 0x04

	/* SiS96x SMBus registers */
	#define SMB_STS 0x00
	#define SMB_EN 0x01
	#define SMB_CNT 0x02
	#define SMB_HOST_CNT 0x03
	#define SMB_ADDR 0x04
	#define SMB_CMD 0x05
	#define SMB_PCOUNT 0x06
	#define SMB_COUNT 0x07
	#define SMB_BYTE 0x08
	#define SMB_DEV_ADDR 0x10
	#define SMB_DB0 0x11
	#define SMB_DB1 0x12
	#define SMB_SAA 0x13

	/* register count for request_region */
	#define SMB_IOSIZE 0x20

	/* Other settings */
	#define MAX_TIMEOUT 500

	/* SiS96x SMBus constants */
	#define SIS96x_QUICK 0x00
	#define SIS96x_BYTE 0x01
	#define SIS96x_BYTE_DATA 0x02
	#define SIS96x_WORD_DATA 0x03
	#define SIS96x_PROC_CALL 0x04
	#define SIS96x_BLOCK_DATA 0x05

	static struct pci_driver sis96x_driver;
	static struct i2c_adapter sis96x_adapter;
	static u16 sis96x_smbus_base;

	static inline u8 sis96x_read(u8 reg)
	{
	return inb(sis96x_smbus_base + reg) ;
	}

	static inline void sis96x_write(u8 reg, u8 data)
	{
	outb(data, sis96x_smbus_base + reg) ;
	}

	/* Execute a SMBus transaction.
	int size is from SIS96x_QUICK to SIS96x_BLOCK_DATA
	*/
	static int sis96x_transaction(int size)
	{
	int temp;
	int result = 0;
	int timeout = 0;

	dev_dbg(&sis96x_adapter.dev, "SMBus transaction %d\n", size);

	/* Make sure the SMBus host is ready to start transmitting */
	if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {

	dev_dbg(&sis96x_adapter.dev, "SMBus busy (0x%02x). "
	"Resetting...\n", temp);

	/* kill the transaction */
	sis96x_write(SMB_HOST_CNT, 0x20);

	/* check it again */
	if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) {
	dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp);
	return -EBUSY;
	} else {
	dev_dbg(&sis96x_adapter.dev, "Successful\n");
	}
	}

	/* Turn off timeout interrupts, set fast host clock */
	sis96x_write(SMB_CNT, 0x20);

	/* clear all (sticky) status flags */
	temp = sis96x_read(SMB_STS);
	sis96x_write(SMB_STS, temp & 0x1e);

	/* start the transaction by setting bit 4 and size bits */
	sis96x_write(SMB_HOST_CNT, 0x10 \| (size & 0x07));

	/* We will always wait for a fraction of a second! */
	do {
	msleep(1);
	temp = sis96x_read(SMB_STS);
	} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));

	/* If the SMBus is still busy, we give up */
	if (timeout >= MAX_TIMEOUT) {
	dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
	result = -ETIMEDOUT;
	}

	/* device error - probably missing ACK */
	if (temp & 0x02) {
	dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n");
	result = -ENXIO;
	}

	/* bus collision */
	if (temp & 0x04) {
	dev_dbg(&sis96x_adapter.dev, "Bus collision!\n");
	result = -EIO;
	}

	/* Finish up by resetting the bus */
	sis96x_write(SMB_STS, temp);
	if ((temp = sis96x_read(SMB_STS))) {
	dev_dbg(&sis96x_adapter.dev, "Failed reset at "
	"end of transaction! (0x%02x)\n", temp);
	}

	return result;
	}

	/* Return negative errno on error. */
	static s32 sis96x_access(struct i2c_adapter * adap, u16 addr,
	unsigned short flags, char read_write,
	u8 command, int size, union i2c_smbus_data * data)
	{
	int status;

	switch (size) {
	case I2C_SMBUS_QUICK:
	sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) \| (read_write & 0x01));
	size = SIS96x_QUICK;
	break;

	case I2C_SMBUS_BYTE:
	sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) \| (read_write & 0x01));
	if (read_write == I2C_SMBUS_WRITE)
	sis96x_write(SMB_CMD, command);
	size = SIS96x_BYTE;
	break;

	case I2C_SMBUS_BYTE_DATA:
	sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) \| (read_write & 0x01));
	sis96x_write(SMB_CMD, command);
	if (read_write == I2C_SMBUS_WRITE)
	sis96x_write(SMB_BYTE, data->byte);
	size = SIS96x_BYTE_DATA;
	break;

	case I2C_SMBUS_PROC_CALL:
	case I2C_SMBUS_WORD_DATA:
	sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) \| (read_write & 0x01));
	sis96x_write(SMB_CMD, command);
	if (read_write == I2C_SMBUS_WRITE) {
	sis96x_write(SMB_BYTE, data->word & 0xff);
	sis96x_write(SMB_BYTE + 1, (data->word & 0xff00) >> 8);
	}
	size = (size == I2C_SMBUS_PROC_CALL ?
	SIS96x_PROC_CALL : SIS96x_WORD_DATA);
	break;

	default:
	dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
	return -EOPNOTSUPP;
	}

	status = sis96x_transaction(size);
	if (status)
	return status;

	if ((size != SIS96x_PROC_CALL) &&
	((read_write == I2C_SMBUS_WRITE) \|\| (size == SIS96x_QUICK)))
	return 0;

	switch (size) {
	case SIS96x_BYTE:
	case SIS96x_BYTE_DATA:
	data->byte = sis96x_read(SMB_BYTE);
	break;

	case SIS96x_WORD_DATA:
	case SIS96x_PROC_CALL:
	data->word = sis96x_read(SMB_BYTE) +
	(sis96x_read(SMB_BYTE + 1) << 8);
	break;
	}
	return 0;
	}

	static u32 sis96x_func(struct i2c_adapter *adapter)
	{
	return I2C_FUNC_SMBUS_QUICK \| I2C_FUNC_SMBUS_BYTE \|
	I2C_FUNC_SMBUS_BYTE_DATA \| I2C_FUNC_SMBUS_WORD_DATA \|
	I2C_FUNC_SMBUS_PROC_CALL;
	}

	static const struct i2c_algorithm smbus_algorithm = {
	.smbus_xfer = sis96x_access,
	.functionality = sis96x_func,
	};

	static struct i2c_adapter sis96x_adapter = {
	.owner = THIS_MODULE,
	.class = I2C_CLASS_HWMON \| I2C_CLASS_SPD,
	.algo = &smbus_algorithm,
	};

	static struct pci_device_id sis96x_ids[] = {
	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_SMBUS) },
	{ 0, }
	};

	MODULE_DEVICE_TABLE (pci, sis96x_ids);

	static int __devinit sis96x_probe(struct pci_dev *dev,
	const struct pci_device_id *id)
	{
	u16 ww = 0;
	int retval;

	if (sis96x_smbus_base) {
	dev_err(&dev->dev, "Only one device supported.\n");
	return -EBUSY;
	}

	pci_read_config_word(dev, PCI_CLASS_DEVICE, &ww);
	if (PCI_CLASS_SERIAL_SMBUS != ww) {
	dev_err(&dev->dev, "Unsupported device class 0x%04x!\n", ww);
	return -ENODEV;
	}

	sis96x_smbus_base = pci_resource_start(dev, SIS96x_BAR);
	if (!sis96x_smbus_base) {
	dev_err(&dev->dev, "SiS96x SMBus base address "
	"not initialized!\n");
	return -EINVAL;
	}
	dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n",
	sis96x_smbus_base);

	retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]);
	if (retval)
	return retval;

	/* Everything is happy, let's grab the memory and set things up. */
	if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
	sis96x_driver.name)) {
	dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x "
	"already in use!\n", sis96x_smbus_base,
	sis96x_smbus_base + SMB_IOSIZE - 1);

	sis96x_smbus_base = 0;
	return -EINVAL;
	}

	/* set up the sysfs linkage to our parent device */
	sis96x_adapter.dev.parent = &dev->dev;

	snprintf(sis96x_adapter.name, sizeof(sis96x_adapter.name),
	"SiS96x SMBus adapter at 0x%04x", sis96x_smbus_base);

	if ((retval = i2c_add_adapter(&sis96x_adapter))) {
	dev_err(&dev->dev, "Couldn't register adapter!\n");
	release_region(sis96x_smbus_base, SMB_IOSIZE);
	sis96x_smbus_base = 0;
	}

	return retval;
	}

	static void __devexit sis96x_remove(struct pci_dev *dev)
	{
	if (sis96x_smbus_base) {
	i2c_del_adapter(&sis96x_adapter);
	release_region(sis96x_smbus_base, SMB_IOSIZE);
	sis96x_smbus_base = 0;
	}
	}

	static struct pci_driver sis96x_driver = {
	.name = "sis96x_smbus",
	.id_table = sis96x_ids,
	.probe = sis96x_probe,
	.remove = __devexit_p(sis96x_remove),
	};

	static int __init i2c_sis96x_init(void)
	{
	return pci_register_driver(&sis96x_driver);
	}

	static void __exit i2c_sis96x_exit(void)
	{
	pci_unregister_driver(&sis96x_driver);
	}

	MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
	MODULE_DESCRIPTION("SiS96x SMBus driver");
	MODULE_LICENSE("GPL");

	/* Register initialization functions using helper macros */
	module_init(i2c_sis96x_init);
	module_exit(i2c_sis96x_exit);