|  | /* | 
|  | * Common code for mac80211 Prism54 drivers | 
|  | * | 
|  | * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> | 
|  | * Copyright (c) 2007, Christian Lamparter <chunkeey@web.de> | 
|  | * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> | 
|  | * | 
|  | * Based on: | 
|  | * - the islsm (softmac prism54) driver, which is: | 
|  | *   Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. | 
|  | * - stlc45xx driver | 
|  | *   Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/firmware.h> | 
|  | #include <linux/etherdevice.h> | 
|  |  | 
|  | #include <net/mac80211.h> | 
|  | #ifdef CONFIG_P54_LEDS | 
|  | #include <linux/leds.h> | 
|  | #endif /* CONFIG_P54_LEDS */ | 
|  |  | 
|  | #include "p54.h" | 
|  | #include "p54common.h" | 
|  |  | 
|  | static int modparam_nohwcrypt; | 
|  | module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); | 
|  | MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); | 
|  | MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); | 
|  | MODULE_DESCRIPTION("Softmac Prism54 common code"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("prism54common"); | 
|  |  | 
|  | static struct ieee80211_rate p54_bgrates[] = { | 
|  | { .bitrate = 10, .hw_value = 0, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  | { .bitrate = 20, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  | { .bitrate = 55, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  | { .bitrate = 110, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  | { .bitrate = 60, .hw_value = 4, }, | 
|  | { .bitrate = 90, .hw_value = 5, }, | 
|  | { .bitrate = 120, .hw_value = 6, }, | 
|  | { .bitrate = 180, .hw_value = 7, }, | 
|  | { .bitrate = 240, .hw_value = 8, }, | 
|  | { .bitrate = 360, .hw_value = 9, }, | 
|  | { .bitrate = 480, .hw_value = 10, }, | 
|  | { .bitrate = 540, .hw_value = 11, }, | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_channel p54_bgchannels[] = { | 
|  | { .center_freq = 2412, .hw_value = 1, }, | 
|  | { .center_freq = 2417, .hw_value = 2, }, | 
|  | { .center_freq = 2422, .hw_value = 3, }, | 
|  | { .center_freq = 2427, .hw_value = 4, }, | 
|  | { .center_freq = 2432, .hw_value = 5, }, | 
|  | { .center_freq = 2437, .hw_value = 6, }, | 
|  | { .center_freq = 2442, .hw_value = 7, }, | 
|  | { .center_freq = 2447, .hw_value = 8, }, | 
|  | { .center_freq = 2452, .hw_value = 9, }, | 
|  | { .center_freq = 2457, .hw_value = 10, }, | 
|  | { .center_freq = 2462, .hw_value = 11, }, | 
|  | { .center_freq = 2467, .hw_value = 12, }, | 
|  | { .center_freq = 2472, .hw_value = 13, }, | 
|  | { .center_freq = 2484, .hw_value = 14, }, | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_supported_band band_2GHz = { | 
|  | .channels = p54_bgchannels, | 
|  | .n_channels = ARRAY_SIZE(p54_bgchannels), | 
|  | .bitrates = p54_bgrates, | 
|  | .n_bitrates = ARRAY_SIZE(p54_bgrates), | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_rate p54_arates[] = { | 
|  | { .bitrate = 60, .hw_value = 4, }, | 
|  | { .bitrate = 90, .hw_value = 5, }, | 
|  | { .bitrate = 120, .hw_value = 6, }, | 
|  | { .bitrate = 180, .hw_value = 7, }, | 
|  | { .bitrate = 240, .hw_value = 8, }, | 
|  | { .bitrate = 360, .hw_value = 9, }, | 
|  | { .bitrate = 480, .hw_value = 10, }, | 
|  | { .bitrate = 540, .hw_value = 11, }, | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_channel p54_achannels[] = { | 
|  | { .center_freq = 4920 }, | 
|  | { .center_freq = 4940 }, | 
|  | { .center_freq = 4960 }, | 
|  | { .center_freq = 4980 }, | 
|  | { .center_freq = 5040 }, | 
|  | { .center_freq = 5060 }, | 
|  | { .center_freq = 5080 }, | 
|  | { .center_freq = 5170 }, | 
|  | { .center_freq = 5180 }, | 
|  | { .center_freq = 5190 }, | 
|  | { .center_freq = 5200 }, | 
|  | { .center_freq = 5210 }, | 
|  | { .center_freq = 5220 }, | 
|  | { .center_freq = 5230 }, | 
|  | { .center_freq = 5240 }, | 
|  | { .center_freq = 5260 }, | 
|  | { .center_freq = 5280 }, | 
|  | { .center_freq = 5300 }, | 
|  | { .center_freq = 5320 }, | 
|  | { .center_freq = 5500 }, | 
|  | { .center_freq = 5520 }, | 
|  | { .center_freq = 5540 }, | 
|  | { .center_freq = 5560 }, | 
|  | { .center_freq = 5580 }, | 
|  | { .center_freq = 5600 }, | 
|  | { .center_freq = 5620 }, | 
|  | { .center_freq = 5640 }, | 
|  | { .center_freq = 5660 }, | 
|  | { .center_freq = 5680 }, | 
|  | { .center_freq = 5700 }, | 
|  | { .center_freq = 5745 }, | 
|  | { .center_freq = 5765 }, | 
|  | { .center_freq = 5785 }, | 
|  | { .center_freq = 5805 }, | 
|  | { .center_freq = 5825 }, | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_supported_band band_5GHz = { | 
|  | .channels = p54_achannels, | 
|  | .n_channels = ARRAY_SIZE(p54_achannels), | 
|  | .bitrates = p54_arates, | 
|  | .n_bitrates = ARRAY_SIZE(p54_arates), | 
|  | }; | 
|  |  | 
|  | int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct bootrec_exp_if *exp_if; | 
|  | struct bootrec *bootrec; | 
|  | u32 *data = (u32 *)fw->data; | 
|  | u32 *end_data = (u32 *)fw->data + (fw->size >> 2); | 
|  | u8 *fw_version = NULL; | 
|  | size_t len; | 
|  | int i; | 
|  | int maxlen; | 
|  |  | 
|  | if (priv->rx_start) | 
|  | return 0; | 
|  |  | 
|  | while (data < end_data && *data) | 
|  | data++; | 
|  |  | 
|  | while (data < end_data && !*data) | 
|  | data++; | 
|  |  | 
|  | bootrec = (struct bootrec *) data; | 
|  |  | 
|  | while (bootrec->data <= end_data && | 
|  | (bootrec->data + (len = le32_to_cpu(bootrec->len))) <= end_data) { | 
|  | u32 code = le32_to_cpu(bootrec->code); | 
|  | switch (code) { | 
|  | case BR_CODE_COMPONENT_ID: | 
|  | priv->fw_interface = be32_to_cpup((__be32 *) | 
|  | bootrec->data); | 
|  | switch (priv->fw_interface) { | 
|  | case FW_LM86: | 
|  | case FW_LM20: | 
|  | case FW_LM87: { | 
|  | char *iftype = (char *)bootrec->data; | 
|  | printk(KERN_INFO "%s: p54 detected a LM%c%c " | 
|  | "firmware\n", | 
|  | wiphy_name(dev->wiphy), | 
|  | iftype[2], iftype[3]); | 
|  | break; | 
|  | } | 
|  | case FW_FMAC: | 
|  | default: | 
|  | printk(KERN_ERR "%s: unsupported firmware\n", | 
|  | wiphy_name(dev->wiphy)); | 
|  | return -ENODEV; | 
|  | } | 
|  | break; | 
|  | case BR_CODE_COMPONENT_VERSION: | 
|  | /* 24 bytes should be enough for all firmwares */ | 
|  | if (strnlen((unsigned char*)bootrec->data, 24) < 24) | 
|  | fw_version = (unsigned char*)bootrec->data; | 
|  | break; | 
|  | case BR_CODE_DESCR: { | 
|  | struct bootrec_desc *desc = | 
|  | (struct bootrec_desc *)bootrec->data; | 
|  | priv->rx_start = le32_to_cpu(desc->rx_start); | 
|  | /* FIXME add sanity checking */ | 
|  | priv->rx_end = le32_to_cpu(desc->rx_end) - 0x3500; | 
|  | priv->headroom = desc->headroom; | 
|  | priv->tailroom = desc->tailroom; | 
|  | priv->privacy_caps = desc->privacy_caps; | 
|  | priv->rx_keycache_size = desc->rx_keycache_size; | 
|  | if (le32_to_cpu(bootrec->len) == 11) | 
|  | priv->rx_mtu = le16_to_cpu(desc->rx_mtu); | 
|  | else | 
|  | priv->rx_mtu = (size_t) | 
|  | 0x620 - priv->tx_hdr_len; | 
|  | maxlen = priv->tx_hdr_len + /* USB devices */ | 
|  | sizeof(struct p54_rx_data) + | 
|  | 4 + /* rx alignment */ | 
|  | IEEE80211_MAX_FRAG_THRESHOLD; | 
|  | if (priv->rx_mtu > maxlen && PAGE_SIZE == 4096) { | 
|  | printk(KERN_INFO "p54: rx_mtu reduced from %d " | 
|  | "to %d\n", priv->rx_mtu, | 
|  | maxlen); | 
|  | priv->rx_mtu = maxlen; | 
|  | } | 
|  | break; | 
|  | } | 
|  | case BR_CODE_EXPOSED_IF: | 
|  | exp_if = (struct bootrec_exp_if *) bootrec->data; | 
|  | for (i = 0; i < (len * sizeof(*exp_if) / 4); i++) | 
|  | if (exp_if[i].if_id == cpu_to_le16(0x1a)) | 
|  | priv->fw_var = le16_to_cpu(exp_if[i].variant); | 
|  | break; | 
|  | case BR_CODE_DEPENDENT_IF: | 
|  | break; | 
|  | case BR_CODE_END_OF_BRA: | 
|  | case LEGACY_BR_CODE_END_OF_BRA: | 
|  | end_data = NULL; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | bootrec = (struct bootrec *)&bootrec->data[len]; | 
|  | } | 
|  |  | 
|  | if (fw_version) | 
|  | printk(KERN_INFO "%s: FW rev %s - Softmac protocol %x.%x\n", | 
|  | wiphy_name(dev->wiphy), fw_version, | 
|  | priv->fw_var >> 8, priv->fw_var & 0xff); | 
|  |  | 
|  | if (priv->fw_var < 0x500) | 
|  | printk(KERN_INFO "%s: you are using an obsolete firmware. " | 
|  | "visit http://wireless.kernel.org/en/users/Drivers/p54 " | 
|  | "and grab one for \"kernel >= 2.6.28\"!\n", | 
|  | wiphy_name(dev->wiphy)); | 
|  |  | 
|  | if (priv->fw_var >= 0x300) { | 
|  | /* Firmware supports QoS, use it! */ | 
|  | priv->tx_stats[P54_QUEUE_AC_VO].limit = 3; | 
|  | priv->tx_stats[P54_QUEUE_AC_VI].limit = 4; | 
|  | priv->tx_stats[P54_QUEUE_AC_BE].limit = 3; | 
|  | priv->tx_stats[P54_QUEUE_AC_BK].limit = 2; | 
|  | dev->queues = P54_QUEUE_AC_NUM; | 
|  | } | 
|  |  | 
|  | if (!modparam_nohwcrypt) | 
|  | printk(KERN_INFO "%s: cryptographic accelerator " | 
|  | "WEP:%s, TKIP:%s, CCMP:%s\n", | 
|  | wiphy_name(dev->wiphy), | 
|  | (priv->privacy_caps & BR_DESC_PRIV_CAP_WEP) ? "YES" : | 
|  | "no", (priv->privacy_caps & (BR_DESC_PRIV_CAP_TKIP | | 
|  | BR_DESC_PRIV_CAP_MICHAEL)) ? "YES" : "no", | 
|  | (priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP) ? | 
|  | "YES" : "no"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(p54_parse_firmware); | 
|  |  | 
|  | static int p54_convert_rev0(struct ieee80211_hw *dev, | 
|  | struct pda_pa_curve_data *curve_data) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct p54_pa_curve_data_sample *dst; | 
|  | struct pda_pa_curve_data_sample_rev0 *src; | 
|  | size_t cd_len = sizeof(*curve_data) + | 
|  | (curve_data->points_per_channel*sizeof(*dst) + 2) * | 
|  | curve_data->channels; | 
|  | unsigned int i, j; | 
|  | void *source, *target; | 
|  |  | 
|  | priv->curve_data = kmalloc(sizeof(*priv->curve_data) + cd_len, | 
|  | GFP_KERNEL); | 
|  | if (!priv->curve_data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | priv->curve_data->entries = curve_data->channels; | 
|  | priv->curve_data->entry_size = sizeof(__le16) + | 
|  | sizeof(*dst) * curve_data->points_per_channel; | 
|  | priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data); | 
|  | priv->curve_data->len = cd_len; | 
|  | memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data)); | 
|  | source = curve_data->data; | 
|  | target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data; | 
|  | for (i = 0; i < curve_data->channels; i++) { | 
|  | __le16 *freq = source; | 
|  | source += sizeof(__le16); | 
|  | *((__le16 *)target) = *freq; | 
|  | target += sizeof(__le16); | 
|  | for (j = 0; j < curve_data->points_per_channel; j++) { | 
|  | dst = target; | 
|  | src = source; | 
|  |  | 
|  | dst->rf_power = src->rf_power; | 
|  | dst->pa_detector = src->pa_detector; | 
|  | dst->data_64qam = src->pcv; | 
|  | /* "invent" the points for the other modulations */ | 
|  | #define SUB(x,y) (u8)((x) - (y)) > (x) ? 0 : (x) - (y) | 
|  | dst->data_16qam = SUB(src->pcv, 12); | 
|  | dst->data_qpsk = SUB(dst->data_16qam, 12); | 
|  | dst->data_bpsk = SUB(dst->data_qpsk, 12); | 
|  | dst->data_barker = SUB(dst->data_bpsk, 14); | 
|  | #undef SUB | 
|  | target += sizeof(*dst); | 
|  | source += sizeof(*src); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int p54_convert_rev1(struct ieee80211_hw *dev, | 
|  | struct pda_pa_curve_data *curve_data) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct p54_pa_curve_data_sample *dst; | 
|  | struct pda_pa_curve_data_sample_rev1 *src; | 
|  | size_t cd_len = sizeof(*curve_data) + | 
|  | (curve_data->points_per_channel*sizeof(*dst) + 2) * | 
|  | curve_data->channels; | 
|  | unsigned int i, j; | 
|  | void *source, *target; | 
|  |  | 
|  | priv->curve_data = kzalloc(cd_len + sizeof(*priv->curve_data), | 
|  | GFP_KERNEL); | 
|  | if (!priv->curve_data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | priv->curve_data->entries = curve_data->channels; | 
|  | priv->curve_data->entry_size = sizeof(__le16) + | 
|  | sizeof(*dst) * curve_data->points_per_channel; | 
|  | priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data); | 
|  | priv->curve_data->len = cd_len; | 
|  | memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data)); | 
|  | source = curve_data->data; | 
|  | target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data; | 
|  | for (i = 0; i < curve_data->channels; i++) { | 
|  | __le16 *freq = source; | 
|  | source += sizeof(__le16); | 
|  | *((__le16 *)target) = *freq; | 
|  | target += sizeof(__le16); | 
|  | for (j = 0; j < curve_data->points_per_channel; j++) { | 
|  | memcpy(target, source, sizeof(*src)); | 
|  |  | 
|  | target += sizeof(*dst); | 
|  | source += sizeof(*src); | 
|  | } | 
|  | source++; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const char *p54_rf_chips[] = { "NULL", "Duette3", "Duette2", | 
|  | "Frisbee", "Xbow", "Longbow", "NULL", "NULL" }; | 
|  | static int p54_init_xbow_synth(struct ieee80211_hw *dev); | 
|  |  | 
|  | static void p54_parse_rssical(struct ieee80211_hw *dev, void *data, int len, | 
|  | u16 type) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | int offset = (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) ? 2 : 0; | 
|  | int entry_size = sizeof(struct pda_rssi_cal_entry) + offset; | 
|  | int num_entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2; | 
|  | int i; | 
|  |  | 
|  | if (len != (entry_size * num_entries)) { | 
|  | printk(KERN_ERR "%s: unknown rssi calibration data packing " | 
|  | " type:(%x) len:%d.\n", | 
|  | wiphy_name(dev->wiphy), type, len); | 
|  |  | 
|  | print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE, | 
|  | data, len); | 
|  |  | 
|  | printk(KERN_ERR "%s: please report this issue.\n", | 
|  | wiphy_name(dev->wiphy)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < num_entries; i++) { | 
|  | struct pda_rssi_cal_entry *cal = data + | 
|  | (offset + i * entry_size); | 
|  | priv->rssical_db[i].mul = (s16) le16_to_cpu(cal->mul); | 
|  | priv->rssical_db[i].add = (s16) le16_to_cpu(cal->add); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void p54_parse_default_country(struct ieee80211_hw *dev, | 
|  | void *data, int len) | 
|  | { | 
|  | struct pda_country *country; | 
|  |  | 
|  | if (len != sizeof(*country)) { | 
|  | printk(KERN_ERR "%s: found possible invalid default country " | 
|  | "eeprom entry. (entry size: %d)\n", | 
|  | wiphy_name(dev->wiphy), len); | 
|  |  | 
|  | print_hex_dump_bytes("country:", DUMP_PREFIX_NONE, | 
|  | data, len); | 
|  |  | 
|  | printk(KERN_ERR "%s: please report this issue.\n", | 
|  | wiphy_name(dev->wiphy)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | country = (struct pda_country *) data; | 
|  | if (country->flags == PDR_COUNTRY_CERT_CODE_PSEUDO) | 
|  | regulatory_hint(dev->wiphy, country->alpha2); | 
|  | else { | 
|  | /* TODO: | 
|  | * write a shared/common function that converts | 
|  | * "Regulatory domain codes" (802.11-2007 14.8.2.2) | 
|  | * into ISO/IEC 3166-1 alpha2 for regulatory_hint. | 
|  | */ | 
|  | } | 
|  | } | 
|  |  | 
|  | static int p54_convert_output_limits(struct ieee80211_hw *dev, | 
|  | u8 *data, size_t len) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  |  | 
|  | if (len < 2) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (data[0] != 0) { | 
|  | printk(KERN_ERR "%s: unknown output power db revision:%x\n", | 
|  | wiphy_name(dev->wiphy), data[0]); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (2 + data[1] * sizeof(struct pda_channel_output_limit) > len) | 
|  | return -EINVAL; | 
|  |  | 
|  | priv->output_limit = kmalloc(data[1] * | 
|  | sizeof(struct pda_channel_output_limit) + | 
|  | sizeof(*priv->output_limit), GFP_KERNEL); | 
|  |  | 
|  | if (!priv->output_limit) | 
|  | return -ENOMEM; | 
|  |  | 
|  | priv->output_limit->offset = 0; | 
|  | priv->output_limit->entries = data[1]; | 
|  | priv->output_limit->entry_size = | 
|  | sizeof(struct pda_channel_output_limit); | 
|  | priv->output_limit->len = priv->output_limit->entry_size * | 
|  | priv->output_limit->entries + | 
|  | priv->output_limit->offset; | 
|  |  | 
|  | memcpy(priv->output_limit->data, &data[2], | 
|  | data[1] * sizeof(struct pda_channel_output_limit)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct p54_cal_database *p54_convert_db(struct pda_custom_wrapper *src, | 
|  | size_t total_len) | 
|  | { | 
|  | struct p54_cal_database *dst; | 
|  | size_t payload_len, entries, entry_size, offset; | 
|  |  | 
|  | payload_len = le16_to_cpu(src->len); | 
|  | entries = le16_to_cpu(src->entries); | 
|  | entry_size = le16_to_cpu(src->entry_size); | 
|  | offset = le16_to_cpu(src->offset); | 
|  | if (((entries * entry_size + offset) != payload_len) || | 
|  | (payload_len + sizeof(*src) != total_len)) | 
|  | return NULL; | 
|  |  | 
|  | dst = kmalloc(sizeof(*dst) + payload_len, GFP_KERNEL); | 
|  | if (!dst) | 
|  | return NULL; | 
|  |  | 
|  | dst->entries = entries; | 
|  | dst->entry_size = entry_size; | 
|  | dst->offset = offset; | 
|  | dst->len = payload_len; | 
|  |  | 
|  | memcpy(dst->data, src->data, payload_len); | 
|  | return dst; | 
|  | } | 
|  |  | 
|  | int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct eeprom_pda_wrap *wrap = NULL; | 
|  | struct pda_entry *entry; | 
|  | unsigned int data_len, entry_len; | 
|  | void *tmp; | 
|  | int err; | 
|  | u8 *end = (u8 *)eeprom + len; | 
|  | u16 synth = 0; | 
|  |  | 
|  | wrap = (struct eeprom_pda_wrap *) eeprom; | 
|  | entry = (void *)wrap->data + le16_to_cpu(wrap->len); | 
|  |  | 
|  | /* verify that at least the entry length/code fits */ | 
|  | while ((u8 *)entry <= end - sizeof(*entry)) { | 
|  | entry_len = le16_to_cpu(entry->len); | 
|  | data_len = ((entry_len - 1) << 1); | 
|  |  | 
|  | /* abort if entry exceeds whole structure */ | 
|  | if ((u8 *)entry + sizeof(*entry) + data_len > end) | 
|  | break; | 
|  |  | 
|  | switch (le16_to_cpu(entry->code)) { | 
|  | case PDR_MAC_ADDRESS: | 
|  | if (data_len != ETH_ALEN) | 
|  | break; | 
|  | SET_IEEE80211_PERM_ADDR(dev, entry->data); | 
|  | break; | 
|  | case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS: | 
|  | if (priv->output_limit) | 
|  | break; | 
|  | err = p54_convert_output_limits(dev, entry->data, | 
|  | data_len); | 
|  | if (err) | 
|  | goto err; | 
|  | break; | 
|  | case PDR_PRISM_PA_CAL_CURVE_DATA: { | 
|  | struct pda_pa_curve_data *curve_data = | 
|  | (struct pda_pa_curve_data *)entry->data; | 
|  | if (data_len < sizeof(*curve_data)) { | 
|  | err = -EINVAL; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | switch (curve_data->cal_method_rev) { | 
|  | case 0: | 
|  | err = p54_convert_rev0(dev, curve_data); | 
|  | break; | 
|  | case 1: | 
|  | err = p54_convert_rev1(dev, curve_data); | 
|  | break; | 
|  | default: | 
|  | printk(KERN_ERR "%s: unknown curve data " | 
|  | "revision %d\n", | 
|  | wiphy_name(dev->wiphy), | 
|  | curve_data->cal_method_rev); | 
|  | err = -ENODEV; | 
|  | break; | 
|  | } | 
|  | if (err) | 
|  | goto err; | 
|  | } | 
|  | break; | 
|  | case PDR_PRISM_ZIF_TX_IQ_CALIBRATION: | 
|  | priv->iq_autocal = kmalloc(data_len, GFP_KERNEL); | 
|  | if (!priv->iq_autocal) { | 
|  | err = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | memcpy(priv->iq_autocal, entry->data, data_len); | 
|  | priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry); | 
|  | break; | 
|  | case PDR_DEFAULT_COUNTRY: | 
|  | p54_parse_default_country(dev, entry->data, data_len); | 
|  | break; | 
|  | case PDR_INTERFACE_LIST: | 
|  | tmp = entry->data; | 
|  | while ((u8 *)tmp < entry->data + data_len) { | 
|  | struct bootrec_exp_if *exp_if = tmp; | 
|  | if (le16_to_cpu(exp_if->if_id) == 0xf) | 
|  | synth = le16_to_cpu(exp_if->variant); | 
|  | tmp += sizeof(struct bootrec_exp_if); | 
|  | } | 
|  | break; | 
|  | case PDR_HARDWARE_PLATFORM_COMPONENT_ID: | 
|  | if (data_len < 2) | 
|  | break; | 
|  | priv->version = *(u8 *)(entry->data + 1); | 
|  | break; | 
|  | case PDR_RSSI_LINEAR_APPROXIMATION: | 
|  | case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND: | 
|  | case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED: | 
|  | p54_parse_rssical(dev, entry->data, data_len, | 
|  | le16_to_cpu(entry->code)); | 
|  | break; | 
|  | case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM: { | 
|  | __le16 *src = (void *) entry->data; | 
|  | s16 *dst = (void *) &priv->rssical_db; | 
|  | int i; | 
|  |  | 
|  | if (data_len != sizeof(priv->rssical_db)) { | 
|  | err = -EINVAL; | 
|  | goto err; | 
|  | } | 
|  | for (i = 0; i < sizeof(priv->rssical_db) / | 
|  | sizeof(*src); i++) | 
|  | *(dst++) = (s16) le16_to_cpu(*(src++)); | 
|  | } | 
|  | break; | 
|  | case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM: { | 
|  | struct pda_custom_wrapper *pda = (void *) entry->data; | 
|  | if (priv->output_limit || data_len < sizeof(*pda)) | 
|  | break; | 
|  | priv->output_limit = p54_convert_db(pda, data_len); | 
|  | } | 
|  | break; | 
|  | case PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM: { | 
|  | struct pda_custom_wrapper *pda = (void *) entry->data; | 
|  | if (priv->curve_data || data_len < sizeof(*pda)) | 
|  | break; | 
|  | priv->curve_data = p54_convert_db(pda, data_len); | 
|  | } | 
|  | break; | 
|  | case PDR_END: | 
|  | /* make it overrun */ | 
|  | entry_len = len; | 
|  | break; | 
|  | case PDR_MANUFACTURING_PART_NUMBER: | 
|  | case PDR_PDA_VERSION: | 
|  | case PDR_NIC_SERIAL_NUMBER: | 
|  | case PDR_REGULATORY_DOMAIN_LIST: | 
|  | case PDR_TEMPERATURE_TYPE: | 
|  | case PDR_PRISM_PCI_IDENTIFIER: | 
|  | case PDR_COUNTRY_INFORMATION: | 
|  | case PDR_OEM_NAME: | 
|  | case PDR_PRODUCT_NAME: | 
|  | case PDR_UTF8_OEM_NAME: | 
|  | case PDR_UTF8_PRODUCT_NAME: | 
|  | case PDR_COUNTRY_LIST: | 
|  | case PDR_ANTENNA_GAIN: | 
|  | case PDR_PRISM_INDIGO_PA_CALIBRATION_DATA: | 
|  | case PDR_REGULATORY_POWER_LIMITS: | 
|  | case PDR_RADIATED_TRANSMISSION_CORRECTION: | 
|  | case PDR_PRISM_TX_IQ_CALIBRATION: | 
|  | case PDR_BASEBAND_REGISTERS: | 
|  | case PDR_PER_CHANNEL_BASEBAND_REGISTERS: | 
|  | break; | 
|  | default: | 
|  | printk(KERN_INFO "%s: unknown eeprom code : 0x%x\n", | 
|  | wiphy_name(dev->wiphy), | 
|  | le16_to_cpu(entry->code)); | 
|  | break; | 
|  | } | 
|  |  | 
|  | entry = (void *)entry + (entry_len + 1)*2; | 
|  | } | 
|  |  | 
|  | if (!synth || !priv->iq_autocal || !priv->output_limit || | 
|  | !priv->curve_data) { | 
|  | printk(KERN_ERR "%s: not all required entries found in eeprom!\n", | 
|  | wiphy_name(dev->wiphy)); | 
|  | err = -EINVAL; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | priv->rxhw = synth & PDR_SYNTH_FRONTEND_MASK; | 
|  | if (priv->rxhw == PDR_SYNTH_FRONTEND_XBOW) | 
|  | p54_init_xbow_synth(dev); | 
|  | if (!(synth & PDR_SYNTH_24_GHZ_DISABLED)) | 
|  | dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz; | 
|  | if (!(synth & PDR_SYNTH_5_GHZ_DISABLED)) | 
|  | dev->wiphy->bands[IEEE80211_BAND_5GHZ] = &band_5GHz; | 
|  | if ((synth & PDR_SYNTH_RX_DIV_MASK) == PDR_SYNTH_RX_DIV_SUPPORTED) | 
|  | priv->rx_diversity_mask = 3; | 
|  | if ((synth & PDR_SYNTH_TX_DIV_MASK) == PDR_SYNTH_TX_DIV_SUPPORTED) | 
|  | priv->tx_diversity_mask = 3; | 
|  |  | 
|  | if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { | 
|  | u8 perm_addr[ETH_ALEN]; | 
|  |  | 
|  | printk(KERN_WARNING "%s: Invalid hwaddr! Using randomly generated MAC addr\n", | 
|  | wiphy_name(dev->wiphy)); | 
|  | random_ether_addr(perm_addr); | 
|  | SET_IEEE80211_PERM_ADDR(dev, perm_addr); | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "%s: hwaddr %pM, MAC:isl38%02x RF:%s\n", | 
|  | wiphy_name(dev->wiphy), | 
|  | dev->wiphy->perm_addr, | 
|  | priv->version, p54_rf_chips[priv->rxhw]); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | if (priv->iq_autocal) { | 
|  | kfree(priv->iq_autocal); | 
|  | priv->iq_autocal = NULL; | 
|  | } | 
|  |  | 
|  | if (priv->output_limit) { | 
|  | kfree(priv->output_limit); | 
|  | priv->output_limit = NULL; | 
|  | } | 
|  |  | 
|  | if (priv->curve_data) { | 
|  | kfree(priv->curve_data); | 
|  | priv->curve_data = NULL; | 
|  | } | 
|  |  | 
|  | printk(KERN_ERR "%s: eeprom parse failed!\n", | 
|  | wiphy_name(dev->wiphy)); | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(p54_parse_eeprom); | 
|  |  | 
|  | static int p54_rssi_to_dbm(struct ieee80211_hw *dev, int rssi) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | int band = dev->conf.channel->band; | 
|  |  | 
|  | if (priv->rxhw != PDR_SYNTH_FRONTEND_LONGBOW) | 
|  | return ((rssi * priv->rssical_db[band].mul) / 64 + | 
|  | priv->rssical_db[band].add) / 4; | 
|  | else | 
|  | /* | 
|  | * TODO: find the correct formula | 
|  | */ | 
|  | return ((rssi * priv->rssical_db[band].mul) / 64 + | 
|  | priv->rssical_db[band].add) / 4; | 
|  | } | 
|  |  | 
|  | static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct p54_rx_data *hdr = (struct p54_rx_data *) skb->data; | 
|  | struct ieee80211_rx_status rx_status = {0}; | 
|  | u16 freq = le16_to_cpu(hdr->freq); | 
|  | size_t header_len = sizeof(*hdr); | 
|  | u32 tsf32; | 
|  | u8 rate = hdr->rate & 0xf; | 
|  |  | 
|  | /* | 
|  | * If the device is in a unspecified state we have to | 
|  | * ignore all data frames. Else we could end up with a | 
|  | * nasty crash. | 
|  | */ | 
|  | if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) | 
|  | return 0; | 
|  |  | 
|  | if (!(hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_IN_FCS_GOOD))) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (hdr->decrypt_status == P54_DECRYPT_OK) | 
|  | rx_status.flag |= RX_FLAG_DECRYPTED; | 
|  | if ((hdr->decrypt_status == P54_DECRYPT_FAIL_MICHAEL) || | 
|  | (hdr->decrypt_status == P54_DECRYPT_FAIL_TKIP)) | 
|  | rx_status.flag |= RX_FLAG_MMIC_ERROR; | 
|  |  | 
|  | rx_status.signal = p54_rssi_to_dbm(dev, hdr->rssi); | 
|  | rx_status.noise = priv->noise; | 
|  | /* XX correct? */ | 
|  | rx_status.qual = (100 * hdr->rssi) / 127; | 
|  | if (hdr->rate & 0x10) | 
|  | rx_status.flag |= RX_FLAG_SHORTPRE; | 
|  | if (dev->conf.channel->band == IEEE80211_BAND_5GHZ) | 
|  | rx_status.rate_idx = (rate < 4) ? 0 : rate - 4; | 
|  | else | 
|  | rx_status.rate_idx = rate; | 
|  |  | 
|  | rx_status.freq = freq; | 
|  | rx_status.band =  dev->conf.channel->band; | 
|  | rx_status.antenna = hdr->antenna; | 
|  |  | 
|  | tsf32 = le32_to_cpu(hdr->tsf32); | 
|  | if (tsf32 < priv->tsf_low32) | 
|  | priv->tsf_high32++; | 
|  | rx_status.mactime = ((u64)priv->tsf_high32) << 32 | tsf32; | 
|  | priv->tsf_low32 = tsf32; | 
|  |  | 
|  | rx_status.flag |= RX_FLAG_TSFT; | 
|  |  | 
|  | if (hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN)) | 
|  | header_len += hdr->align[0]; | 
|  |  | 
|  | skb_pull(skb, header_len); | 
|  | skb_trim(skb, le16_to_cpu(hdr->len)); | 
|  |  | 
|  | ieee80211_rx_irqsafe(dev, skb, &rx_status); | 
|  |  | 
|  | queue_delayed_work(dev->workqueue, &priv->work, | 
|  | msecs_to_jiffies(P54_STATISTICS_UPDATE)); | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void inline p54_wake_free_queues(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | int i; | 
|  |  | 
|  | if (priv->mode == NL80211_IFTYPE_UNSPECIFIED) | 
|  | return ; | 
|  |  | 
|  | for (i = 0; i < dev->queues; i++) | 
|  | if (priv->tx_stats[i + P54_QUEUE_DATA].len < | 
|  | priv->tx_stats[i + P54_QUEUE_DATA].limit) | 
|  | ieee80211_wake_queue(dev, i); | 
|  | } | 
|  |  | 
|  | void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct p54_tx_info *range; | 
|  | unsigned long flags; | 
|  | u32 freed = 0, last_addr = priv->rx_start; | 
|  |  | 
|  | if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue))) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * don't try to free an already unlinked skb | 
|  | */ | 
|  | if (unlikely((!skb->next) || (!skb->prev))) | 
|  | return; | 
|  |  | 
|  | spin_lock_irqsave(&priv->tx_queue.lock, flags); | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | range = (void *)info->rate_driver_data; | 
|  | if (skb->prev != (struct sk_buff *)&priv->tx_queue) { | 
|  | struct ieee80211_tx_info *ni; | 
|  | struct p54_tx_info *mr; | 
|  |  | 
|  | ni = IEEE80211_SKB_CB(skb->prev); | 
|  | mr = (struct p54_tx_info *)ni->rate_driver_data; | 
|  | last_addr = mr->end_addr; | 
|  | } | 
|  | if (skb->next != (struct sk_buff *)&priv->tx_queue) { | 
|  | struct ieee80211_tx_info *ni; | 
|  | struct p54_tx_info *mr; | 
|  |  | 
|  | ni = IEEE80211_SKB_CB(skb->next); | 
|  | mr = (struct p54_tx_info *)ni->rate_driver_data; | 
|  | freed = mr->start_addr - last_addr; | 
|  | } else | 
|  | freed = priv->rx_end - last_addr; | 
|  | __skb_unlink(skb, &priv->tx_queue); | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  | dev_kfree_skb_any(skb); | 
|  |  | 
|  | if (freed >= priv->headroom + sizeof(struct p54_hdr) + 48 + | 
|  | IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom) | 
|  | p54_wake_free_queues(dev); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(p54_free_skb); | 
|  |  | 
|  | static struct sk_buff *p54_find_tx_entry(struct ieee80211_hw *dev, | 
|  | __le32 req_id) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *entry; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&priv->tx_queue.lock, flags); | 
|  | entry = priv->tx_queue.next; | 
|  | while (entry != (struct sk_buff *)&priv->tx_queue) { | 
|  | struct p54_hdr *hdr = (struct p54_hdr *) entry->data; | 
|  |  | 
|  | if (hdr->req_id == req_id) { | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  | return entry; | 
|  | } | 
|  | entry = entry->next; | 
|  | } | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | 
|  | struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data; | 
|  | struct sk_buff *entry; | 
|  | u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom; | 
|  | struct p54_tx_info *range = NULL; | 
|  | u32 freed = 0; | 
|  | u32 last_addr = priv->rx_start; | 
|  | unsigned long flags; | 
|  | int count, idx; | 
|  |  | 
|  | spin_lock_irqsave(&priv->tx_queue.lock, flags); | 
|  | entry = (struct sk_buff *) priv->tx_queue.next; | 
|  | while (entry != (struct sk_buff *)&priv->tx_queue) { | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); | 
|  | struct p54_hdr *entry_hdr; | 
|  | struct p54_tx_data *entry_data; | 
|  | unsigned int pad = 0, frame_len; | 
|  |  | 
|  | range = (void *)info->rate_driver_data; | 
|  | if (range->start_addr != addr) { | 
|  | last_addr = range->end_addr; | 
|  | entry = entry->next; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (entry->next != (struct sk_buff *)&priv->tx_queue) { | 
|  | struct ieee80211_tx_info *ni; | 
|  | struct p54_tx_info *mr; | 
|  |  | 
|  | ni = IEEE80211_SKB_CB(entry->next); | 
|  | mr = (struct p54_tx_info *)ni->rate_driver_data; | 
|  | freed = mr->start_addr - last_addr; | 
|  | } else | 
|  | freed = priv->rx_end - last_addr; | 
|  |  | 
|  | last_addr = range->end_addr; | 
|  | __skb_unlink(entry, &priv->tx_queue); | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  |  | 
|  | frame_len = entry->len; | 
|  | entry_hdr = (struct p54_hdr *) entry->data; | 
|  | entry_data = (struct p54_tx_data *) entry_hdr->data; | 
|  | priv->tx_stats[entry_data->hw_queue].len--; | 
|  | priv->stats.dot11ACKFailureCount += payload->tries - 1; | 
|  |  | 
|  | /* | 
|  | * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are | 
|  | * generated by the driver. Therefore tx_status is bogus | 
|  | * and we don't want to confuse the mac80211 stack. | 
|  | */ | 
|  | if (unlikely(entry_data->hw_queue < P54_QUEUE_FWSCAN)) { | 
|  | if (entry_data->hw_queue == P54_QUEUE_BEACON) | 
|  | priv->cached_beacon = NULL; | 
|  |  | 
|  | kfree_skb(entry); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Clear manually, ieee80211_tx_info_clear_status would | 
|  | * clear the counts too and we need them. | 
|  | */ | 
|  | memset(&info->status.ampdu_ack_len, 0, | 
|  | sizeof(struct ieee80211_tx_info) - | 
|  | offsetof(struct ieee80211_tx_info, status.ampdu_ack_len)); | 
|  | BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, | 
|  | status.ampdu_ack_len) != 23); | 
|  |  | 
|  | if (entry_hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN)) | 
|  | pad = entry_data->align[0]; | 
|  |  | 
|  | /* walk through the rates array and adjust the counts */ | 
|  | count = payload->tries; | 
|  | for (idx = 0; idx < 4; idx++) { | 
|  | if (count >= info->status.rates[idx].count) { | 
|  | count -= info->status.rates[idx].count; | 
|  | } else if (count > 0) { | 
|  | info->status.rates[idx].count = count; | 
|  | count = 0; | 
|  | } else { | 
|  | info->status.rates[idx].idx = -1; | 
|  | info->status.rates[idx].count = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && | 
|  | (!payload->status)) | 
|  | info->flags |= IEEE80211_TX_STAT_ACK; | 
|  | if (payload->status & P54_TX_PSM_CANCELLED) | 
|  | info->flags |= IEEE80211_TX_STAT_TX_FILTERED; | 
|  | info->status.ack_signal = p54_rssi_to_dbm(dev, | 
|  | (int)payload->ack_rssi); | 
|  |  | 
|  | /* Undo all changes to the frame. */ | 
|  | switch (entry_data->key_type) { | 
|  | case P54_CRYPTO_TKIPMICHAEL: { | 
|  | u8 *iv = (u8 *)(entry_data->align + pad + | 
|  | entry_data->crypt_offset); | 
|  |  | 
|  | /* Restore the original TKIP IV. */ | 
|  | iv[2] = iv[0]; | 
|  | iv[0] = iv[1]; | 
|  | iv[1] = (iv[0] | 0x20) & 0x7f;	/* WEPSeed - 8.3.2.2 */ | 
|  |  | 
|  | frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */ | 
|  | break; | 
|  | } | 
|  | case P54_CRYPTO_AESCCMP: | 
|  | frame_len -= 8; /* remove CCMP_MIC */ | 
|  | break; | 
|  | case P54_CRYPTO_WEP: | 
|  | frame_len -= 4; /* remove WEP_ICV */ | 
|  | break; | 
|  | } | 
|  | skb_trim(entry, frame_len); | 
|  | skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); | 
|  | ieee80211_tx_status_irqsafe(dev, entry); | 
|  | goto out; | 
|  | } | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  |  | 
|  | out: | 
|  | if (freed >= priv->headroom + sizeof(struct p54_hdr) + 48 + | 
|  | IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom) | 
|  | p54_wake_free_queues(dev); | 
|  | } | 
|  |  | 
|  | static void p54_rx_eeprom_readback(struct ieee80211_hw *dev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | 
|  | struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; | 
|  | struct p54_common *priv = dev->priv; | 
|  |  | 
|  | if (!priv->eeprom) | 
|  | return ; | 
|  |  | 
|  | if (priv->fw_var >= 0x509) { | 
|  | memcpy(priv->eeprom, eeprom->v2.data, | 
|  | le16_to_cpu(eeprom->v2.len)); | 
|  | } else { | 
|  | memcpy(priv->eeprom, eeprom->v1.data, | 
|  | le16_to_cpu(eeprom->v1.len)); | 
|  | } | 
|  |  | 
|  | complete(&priv->eeprom_comp); | 
|  | } | 
|  |  | 
|  | static void p54_rx_stats(struct ieee80211_hw *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | 
|  | struct p54_statistics *stats = (struct p54_statistics *) hdr->data; | 
|  | u32 tsf32; | 
|  |  | 
|  | if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) | 
|  | return ; | 
|  |  | 
|  | tsf32 = le32_to_cpu(stats->tsf32); | 
|  | if (tsf32 < priv->tsf_low32) | 
|  | priv->tsf_high32++; | 
|  | priv->tsf_low32 = tsf32; | 
|  |  | 
|  | priv->stats.dot11RTSFailureCount = le32_to_cpu(stats->rts_fail); | 
|  | priv->stats.dot11RTSSuccessCount = le32_to_cpu(stats->rts_success); | 
|  | priv->stats.dot11FCSErrorCount = le32_to_cpu(stats->rx_bad_fcs); | 
|  |  | 
|  | priv->noise = p54_rssi_to_dbm(dev, le32_to_cpu(stats->noise)); | 
|  |  | 
|  | p54_free_skb(dev, p54_find_tx_entry(dev, hdr->req_id)); | 
|  | } | 
|  |  | 
|  | static void p54_rx_trap(struct ieee80211_hw *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | 
|  | struct p54_trap *trap = (struct p54_trap *) hdr->data; | 
|  | u16 event = le16_to_cpu(trap->event); | 
|  | u16 freq = le16_to_cpu(trap->frequency); | 
|  |  | 
|  | switch (event) { | 
|  | case P54_TRAP_BEACON_TX: | 
|  | break; | 
|  | case P54_TRAP_RADAR: | 
|  | printk(KERN_INFO "%s: radar (freq:%d MHz)\n", | 
|  | wiphy_name(dev->wiphy), freq); | 
|  | break; | 
|  | case P54_TRAP_NO_BEACON: | 
|  | break; | 
|  | case P54_TRAP_SCAN: | 
|  | break; | 
|  | case P54_TRAP_TBTT: | 
|  | break; | 
|  | case P54_TRAP_TIMER: | 
|  | break; | 
|  | default: | 
|  | printk(KERN_INFO "%s: received event:%x freq:%d\n", | 
|  | wiphy_name(dev->wiphy), event, freq); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | 
|  |  | 
|  | switch (le16_to_cpu(hdr->type)) { | 
|  | case P54_CONTROL_TYPE_TXDONE: | 
|  | p54_rx_frame_sent(dev, skb); | 
|  | break; | 
|  | case P54_CONTROL_TYPE_TRAP: | 
|  | p54_rx_trap(dev, skb); | 
|  | break; | 
|  | case P54_CONTROL_TYPE_BBP: | 
|  | break; | 
|  | case P54_CONTROL_TYPE_STAT_READBACK: | 
|  | p54_rx_stats(dev, skb); | 
|  | break; | 
|  | case P54_CONTROL_TYPE_EEPROM_READBACK: | 
|  | p54_rx_eeprom_readback(dev, skb); | 
|  | break; | 
|  | default: | 
|  | printk(KERN_DEBUG "%s: not handling 0x%02x type control frame\n", | 
|  | wiphy_name(dev->wiphy), le16_to_cpu(hdr->type)); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* returns zero if skb can be reused */ | 
|  | int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb) | 
|  | { | 
|  | u16 type = le16_to_cpu(*((__le16 *)skb->data)); | 
|  |  | 
|  | if (type & P54_HDR_FLAG_CONTROL) | 
|  | return p54_rx_control(dev, skb); | 
|  | else | 
|  | return p54_rx_data(dev, skb); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(p54_rx); | 
|  |  | 
|  | /* | 
|  | * So, the firmware is somewhat stupid and doesn't know what places in its | 
|  | * memory incoming data should go to. By poking around in the firmware, we | 
|  | * can find some unused memory to upload our packets to. However, data that we | 
|  | * want the card to TX needs to stay intact until the card has told us that | 
|  | * it is done with it. This function finds empty places we can upload to and | 
|  | * marks allocated areas as reserved if necessary. p54_rx_frame_sent or | 
|  | * p54_free_skb frees allocated areas. | 
|  | */ | 
|  | static int p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, | 
|  | struct p54_hdr *data, u32 len) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *entry; | 
|  | struct sk_buff *target_skb = NULL; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct p54_tx_info *range; | 
|  | u32 last_addr = priv->rx_start; | 
|  | u32 largest_hole = 0; | 
|  | u32 target_addr = priv->rx_start; | 
|  | unsigned long flags; | 
|  | unsigned int left; | 
|  | len = (len + priv->headroom + priv->tailroom + 3) & ~0x3; | 
|  |  | 
|  | if (!skb) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&priv->tx_queue.lock, flags); | 
|  |  | 
|  | left = skb_queue_len(&priv->tx_queue); | 
|  | if (unlikely(left >= 28)) { | 
|  | /* | 
|  | * The tx_queue is nearly full! | 
|  | * We have throttle normal data traffic, because we must | 
|  | * have a few spare slots for control frames left. | 
|  | */ | 
|  | ieee80211_stop_queues(dev); | 
|  | queue_delayed_work(dev->workqueue, &priv->work, | 
|  | msecs_to_jiffies(P54_TX_TIMEOUT)); | 
|  |  | 
|  | if (unlikely(left == 32)) { | 
|  | /* | 
|  | * The tx_queue is now really full. | 
|  | * | 
|  | * TODO: check if the device has crashed and reset it. | 
|  | */ | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  | return -ENOSPC; | 
|  | } | 
|  | } | 
|  |  | 
|  | entry = priv->tx_queue.next; | 
|  | while (left--) { | 
|  | u32 hole_size; | 
|  | info = IEEE80211_SKB_CB(entry); | 
|  | range = (void *)info->rate_driver_data; | 
|  | hole_size = range->start_addr - last_addr; | 
|  | if (!target_skb && hole_size >= len) { | 
|  | target_skb = entry->prev; | 
|  | hole_size -= len; | 
|  | target_addr = last_addr; | 
|  | } | 
|  | largest_hole = max(largest_hole, hole_size); | 
|  | last_addr = range->end_addr; | 
|  | entry = entry->next; | 
|  | } | 
|  | if (!target_skb && priv->rx_end - last_addr >= len) { | 
|  | target_skb = priv->tx_queue.prev; | 
|  | largest_hole = max(largest_hole, priv->rx_end - last_addr - len); | 
|  | if (!skb_queue_empty(&priv->tx_queue)) { | 
|  | info = IEEE80211_SKB_CB(target_skb); | 
|  | range = (void *)info->rate_driver_data; | 
|  | target_addr = range->end_addr; | 
|  | } | 
|  | } else | 
|  | largest_hole = max(largest_hole, priv->rx_end - last_addr); | 
|  |  | 
|  | if (!target_skb) { | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  | ieee80211_stop_queues(dev); | 
|  | return -ENOSPC; | 
|  | } | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | range = (void *)info->rate_driver_data; | 
|  | range->start_addr = target_addr; | 
|  | range->end_addr = target_addr + len; | 
|  | __skb_queue_after(&priv->tx_queue, target_skb, skb); | 
|  | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | 
|  |  | 
|  | if (largest_hole < priv->headroom + sizeof(struct p54_hdr) + | 
|  | 48 + IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom) | 
|  | ieee80211_stop_queues(dev); | 
|  |  | 
|  | data->req_id = cpu_to_le32(target_addr + priv->headroom); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct sk_buff *p54_alloc_skb(struct ieee80211_hw *dev, u16 hdr_flags, | 
|  | u16 payload_len, u16 type, gfp_t memflags) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct p54_hdr *hdr; | 
|  | struct sk_buff *skb; | 
|  | size_t frame_len = sizeof(*hdr) + payload_len; | 
|  |  | 
|  | if (frame_len > P54_MAX_CTRL_FRAME_LEN) | 
|  | return NULL; | 
|  |  | 
|  | skb = __dev_alloc_skb(priv->tx_hdr_len + frame_len, memflags); | 
|  | if (!skb) | 
|  | return NULL; | 
|  | skb_reserve(skb, priv->tx_hdr_len); | 
|  |  | 
|  | hdr = (struct p54_hdr *) skb_put(skb, sizeof(*hdr)); | 
|  | hdr->flags = cpu_to_le16(hdr_flags); | 
|  | hdr->len = cpu_to_le16(payload_len); | 
|  | hdr->type = cpu_to_le16(type); | 
|  | hdr->tries = hdr->rts_tries = 0; | 
|  |  | 
|  | if (p54_assign_address(dev, skb, hdr, frame_len)) { | 
|  | kfree_skb(skb); | 
|  | return NULL; | 
|  | } | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | int p54_read_eeprom(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct p54_eeprom_lm86 *eeprom_hdr; | 
|  | struct sk_buff *skb; | 
|  | size_t eeprom_size = 0x2020, offset = 0, blocksize, maxblocksize; | 
|  | int ret = -ENOMEM; | 
|  | void *eeprom = NULL; | 
|  |  | 
|  | maxblocksize = EEPROM_READBACK_LEN; | 
|  | if (priv->fw_var >= 0x509) | 
|  | maxblocksize -= 0xc; | 
|  | else | 
|  | maxblocksize -= 0x4; | 
|  |  | 
|  | skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL, sizeof(*eeprom_hdr) + | 
|  | maxblocksize, P54_CONTROL_TYPE_EEPROM_READBACK, | 
|  | GFP_KERNEL); | 
|  | if (!skb) | 
|  | goto free; | 
|  | priv->eeprom = kzalloc(EEPROM_READBACK_LEN, GFP_KERNEL); | 
|  | if (!priv->eeprom) | 
|  | goto free; | 
|  | eeprom = kzalloc(eeprom_size, GFP_KERNEL); | 
|  | if (!eeprom) | 
|  | goto free; | 
|  |  | 
|  | eeprom_hdr = (struct p54_eeprom_lm86 *) skb_put(skb, | 
|  | sizeof(*eeprom_hdr) + maxblocksize); | 
|  |  | 
|  | while (eeprom_size) { | 
|  | blocksize = min(eeprom_size, maxblocksize); | 
|  | if (priv->fw_var < 0x509) { | 
|  | eeprom_hdr->v1.offset = cpu_to_le16(offset); | 
|  | eeprom_hdr->v1.len = cpu_to_le16(blocksize); | 
|  | } else { | 
|  | eeprom_hdr->v2.offset = cpu_to_le32(offset); | 
|  | eeprom_hdr->v2.len = cpu_to_le16(blocksize); | 
|  | eeprom_hdr->v2.magic2 = 0xf; | 
|  | memcpy(eeprom_hdr->v2.magic, (const char *)"LOCK", 4); | 
|  | } | 
|  | priv->tx(dev, skb); | 
|  |  | 
|  | if (!wait_for_completion_interruptible_timeout(&priv->eeprom_comp, HZ)) { | 
|  | printk(KERN_ERR "%s: device does not respond!\n", | 
|  | wiphy_name(dev->wiphy)); | 
|  | ret = -EBUSY; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | memcpy(eeprom + offset, priv->eeprom, blocksize); | 
|  | offset += blocksize; | 
|  | eeprom_size -= blocksize; | 
|  | } | 
|  |  | 
|  | ret = p54_parse_eeprom(dev, eeprom, offset); | 
|  | free: | 
|  | kfree(priv->eeprom); | 
|  | priv->eeprom = NULL; | 
|  | p54_free_skb(dev, skb); | 
|  | kfree(eeprom); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(p54_read_eeprom); | 
|  |  | 
|  | static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta, | 
|  | bool set) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *skb; | 
|  | struct p54_tim *tim; | 
|  |  | 
|  | skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*tim), | 
|  | P54_CONTROL_TYPE_TIM, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | tim = (struct p54_tim *) skb_put(skb, sizeof(*tim)); | 
|  | tim->count = 1; | 
|  | tim->entry[0] = cpu_to_le16(set ? (sta->aid | 0x8000) : sta->aid); | 
|  | priv->tx(dev, skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int p54_sta_unlock(struct ieee80211_hw *dev, u8 *addr) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *skb; | 
|  | struct p54_sta_unlock *sta; | 
|  |  | 
|  | skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*sta), | 
|  | P54_CONTROL_TYPE_PSM_STA_UNLOCK, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | sta = (struct p54_sta_unlock *)skb_put(skb, sizeof(*sta)); | 
|  | memcpy(sta->addr, addr, ETH_ALEN); | 
|  | priv->tx(dev, skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void p54_sta_notify(struct ieee80211_hw *dev, struct ieee80211_vif *vif, | 
|  | enum sta_notify_cmd notify_cmd, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | switch (notify_cmd) { | 
|  | case STA_NOTIFY_ADD: | 
|  | case STA_NOTIFY_REMOVE: | 
|  | /* | 
|  | * Notify the firmware that we don't want or we don't | 
|  | * need to buffer frames for this station anymore. | 
|  | */ | 
|  |  | 
|  | p54_sta_unlock(dev, sta->addr); | 
|  | break; | 
|  | case STA_NOTIFY_AWAKE: | 
|  | /* update the firmware's filter table */ | 
|  | p54_sta_unlock(dev, sta->addr); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int p54_tx_cancel(struct ieee80211_hw *dev, struct sk_buff *entry) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *skb; | 
|  | struct p54_hdr *hdr; | 
|  | struct p54_txcancel *cancel; | 
|  |  | 
|  | skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*cancel), | 
|  | P54_CONTROL_TYPE_TXCANCEL, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | hdr = (void *)entry->data; | 
|  | cancel = (struct p54_txcancel *)skb_put(skb, sizeof(*cancel)); | 
|  | cancel->req_id = hdr->req_id; | 
|  | priv->tx(dev, skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int p54_tx_fill(struct ieee80211_hw *dev, struct sk_buff *skb, | 
|  | struct ieee80211_tx_info *info, u8 *queue, size_t *extra_len, | 
|  | u16 *flags, u16 *aid) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
|  | struct p54_common *priv = dev->priv; | 
|  | int ret = 1; | 
|  |  | 
|  | switch (priv->mode) { | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | /* | 
|  | * We have to set P54_HDR_FLAG_DATA_OUT_PROMISC for | 
|  | * every frame in promiscuous/monitor mode. | 
|  | * see STSW45x0C LMAC API - page 12. | 
|  | */ | 
|  | *aid = 0; | 
|  | *flags = P54_HDR_FLAG_DATA_OUT_PROMISC; | 
|  | *queue += P54_QUEUE_DATA; | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | *aid = 1; | 
|  | if (unlikely(ieee80211_is_mgmt(hdr->frame_control))) { | 
|  | *queue = P54_QUEUE_MGMT; | 
|  | ret = 0; | 
|  | } else | 
|  | *queue += P54_QUEUE_DATA; | 
|  | break; | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { | 
|  | *aid = 0; | 
|  | *queue = P54_QUEUE_CAB; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (unlikely(ieee80211_is_mgmt(hdr->frame_control))) { | 
|  | if (ieee80211_is_probe_resp(hdr->frame_control)) { | 
|  | *aid = 0; | 
|  | *queue = P54_QUEUE_MGMT; | 
|  | *flags = P54_HDR_FLAG_DATA_OUT_TIMESTAMP | | 
|  | P54_HDR_FLAG_DATA_OUT_NOCANCEL; | 
|  | return 0; | 
|  | } else if (ieee80211_is_beacon(hdr->frame_control)) { | 
|  | *aid = 0; | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_CTL_INJECTED) { | 
|  | /* | 
|  | * Injecting beacons on top of a AP is | 
|  | * not a good idea... nevertheless, | 
|  | * it should be doable. | 
|  | */ | 
|  |  | 
|  | *queue += P54_QUEUE_DATA; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | *flags = P54_HDR_FLAG_DATA_OUT_TIMESTAMP; | 
|  | *queue = P54_QUEUE_BEACON; | 
|  | *extra_len = IEEE80211_MAX_TIM_LEN; | 
|  | return 0; | 
|  | } else { | 
|  | *queue = P54_QUEUE_MGMT; | 
|  | ret = 0; | 
|  | } | 
|  | } else | 
|  | *queue += P54_QUEUE_DATA; | 
|  |  | 
|  | if (info->control.sta) | 
|  | *aid = info->control.sta->aid; | 
|  | else | 
|  | *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL; | 
|  | break; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static u8 p54_convert_algo(enum ieee80211_key_alg alg) | 
|  | { | 
|  | switch (alg) { | 
|  | case ALG_WEP: | 
|  | return P54_CRYPTO_WEP; | 
|  | case ALG_TKIP: | 
|  | return P54_CRYPTO_TKIPMICHAEL; | 
|  | case ALG_CCMP: | 
|  | return P54_CRYPTO_AESCCMP; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_tx_queue_stats *current_queue; | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct p54_hdr *hdr; | 
|  | struct p54_tx_data *txhdr; | 
|  | size_t padding, len, tim_len = 0; | 
|  | int i, j, ridx, ret; | 
|  | u16 hdr_flags = 0, aid = 0; | 
|  | u8 rate, queue, crypt_offset = 0; | 
|  | u8 cts_rate = 0x20; | 
|  | u8 rc_flags; | 
|  | u8 calculated_tries[4]; | 
|  | u8 nrates = 0, nremaining = 8; | 
|  |  | 
|  | queue = skb_get_queue_mapping(skb); | 
|  |  | 
|  | ret = p54_tx_fill(dev, skb, info, &queue, &tim_len, &hdr_flags, &aid); | 
|  | current_queue = &priv->tx_stats[queue]; | 
|  | if (unlikely((current_queue->len > current_queue->limit) && ret)) | 
|  | return NETDEV_TX_BUSY; | 
|  | current_queue->len++; | 
|  | current_queue->count++; | 
|  | if ((current_queue->len == current_queue->limit) && ret) | 
|  | ieee80211_stop_queue(dev, skb_get_queue_mapping(skb)); | 
|  |  | 
|  | padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3; | 
|  | len = skb->len; | 
|  |  | 
|  | if (info->control.hw_key) { | 
|  | crypt_offset = ieee80211_get_hdrlen_from_skb(skb); | 
|  | if (info->control.hw_key->alg == ALG_TKIP) { | 
|  | u8 *iv = (u8 *)(skb->data + crypt_offset); | 
|  | /* | 
|  | * The firmware excepts that the IV has to have | 
|  | * this special format | 
|  | */ | 
|  | iv[1] = iv[0]; | 
|  | iv[0] = iv[2]; | 
|  | iv[2] = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | txhdr = (struct p54_tx_data *) skb_push(skb, sizeof(*txhdr) + padding); | 
|  | hdr = (struct p54_hdr *) skb_push(skb, sizeof(*hdr)); | 
|  |  | 
|  | if (padding) | 
|  | hdr_flags |= P54_HDR_FLAG_DATA_ALIGN; | 
|  | hdr->type = cpu_to_le16(aid); | 
|  | hdr->rts_tries = info->control.rates[0].count; | 
|  |  | 
|  | /* | 
|  | * we register the rates in perfect order, and | 
|  | * RTS/CTS won't happen on 5 GHz | 
|  | */ | 
|  | cts_rate = info->control.rts_cts_rate_idx; | 
|  |  | 
|  | memset(&txhdr->rateset, 0, sizeof(txhdr->rateset)); | 
|  |  | 
|  | /* see how many rates got used */ | 
|  | for (i = 0; i < 4; i++) { | 
|  | if (info->control.rates[i].idx < 0) | 
|  | break; | 
|  | nrates++; | 
|  | } | 
|  |  | 
|  | /* limit tries to 8/nrates per rate */ | 
|  | for (i = 0; i < nrates; i++) { | 
|  | /* | 
|  | * The magic expression here is equivalent to 8/nrates for | 
|  | * all values that matter, but avoids division and jumps. | 
|  | * Note that nrates can only take the values 1 through 4. | 
|  | */ | 
|  | calculated_tries[i] = min_t(int, ((15 >> nrates) | 1) + 1, | 
|  | info->control.rates[i].count); | 
|  | nremaining -= calculated_tries[i]; | 
|  | } | 
|  |  | 
|  | /* if there are tries left, distribute from back to front */ | 
|  | for (i = nrates - 1; nremaining > 0 && i >= 0; i--) { | 
|  | int tmp = info->control.rates[i].count - calculated_tries[i]; | 
|  |  | 
|  | if (tmp <= 0) | 
|  | continue; | 
|  | /* RC requested more tries at this rate */ | 
|  |  | 
|  | tmp = min_t(int, tmp, nremaining); | 
|  | calculated_tries[i] += tmp; | 
|  | nremaining -= tmp; | 
|  | } | 
|  |  | 
|  | ridx = 0; | 
|  | for (i = 0; i < nrates && ridx < 8; i++) { | 
|  | /* we register the rates in perfect order */ | 
|  | rate = info->control.rates[i].idx; | 
|  | if (info->band == IEEE80211_BAND_5GHZ) | 
|  | rate += 4; | 
|  |  | 
|  | /* store the count we actually calculated for TX status */ | 
|  | info->control.rates[i].count = calculated_tries[i]; | 
|  |  | 
|  | rc_flags = info->control.rates[i].flags; | 
|  | if (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) { | 
|  | rate |= 0x10; | 
|  | cts_rate |= 0x10; | 
|  | } | 
|  | if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) | 
|  | rate |= 0x40; | 
|  | else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) | 
|  | rate |= 0x20; | 
|  | for (j = 0; j < calculated_tries[i] && ridx < 8; j++) { | 
|  | txhdr->rateset[ridx] = rate; | 
|  | ridx++; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) | 
|  | hdr_flags |= P54_HDR_FLAG_DATA_OUT_SEQNR; | 
|  |  | 
|  | /* TODO: enable bursting */ | 
|  | hdr->flags = cpu_to_le16(hdr_flags); | 
|  | hdr->tries = ridx; | 
|  | txhdr->rts_rate_idx = 0; | 
|  | if (info->control.hw_key) { | 
|  | txhdr->key_type = p54_convert_algo(info->control.hw_key->alg); | 
|  | txhdr->key_len = min((u8)16, info->control.hw_key->keylen); | 
|  | memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len); | 
|  | if (info->control.hw_key->alg == ALG_TKIP) { | 
|  | if (unlikely(skb_tailroom(skb) < 12)) | 
|  | goto err; | 
|  | /* reserve space for the MIC key */ | 
|  | len += 8; | 
|  | memcpy(skb_put(skb, 8), &(info->control.hw_key->key | 
|  | [NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY]), 8); | 
|  | } | 
|  | /* reserve some space for ICV */ | 
|  | len += info->control.hw_key->icv_len; | 
|  | memset(skb_put(skb, info->control.hw_key->icv_len), 0, | 
|  | info->control.hw_key->icv_len); | 
|  | } else { | 
|  | txhdr->key_type = 0; | 
|  | txhdr->key_len = 0; | 
|  | } | 
|  | txhdr->crypt_offset = crypt_offset; | 
|  | txhdr->hw_queue = queue; | 
|  | txhdr->backlog = current_queue->len; | 
|  | memset(txhdr->durations, 0, sizeof(txhdr->durations)); | 
|  | txhdr->tx_antenna = ((info->antenna_sel_tx == 0) ? | 
|  | 2 : info->antenna_sel_tx - 1) & priv->tx_diversity_mask; | 
|  | if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) { | 
|  | txhdr->longbow.cts_rate = cts_rate; | 
|  | txhdr->longbow.output_power = cpu_to_le16(priv->output_power); | 
|  | } else { | 
|  | txhdr->normal.output_power = priv->output_power; | 
|  | txhdr->normal.cts_rate = cts_rate; | 
|  | } | 
|  | if (padding) | 
|  | txhdr->align[0] = padding; | 
|  |  | 
|  | hdr->len = cpu_to_le16(len); | 
|  | /* modifies skb->cb and with it info, so must be last! */ | 
|  | if (unlikely(p54_assign_address(dev, skb, hdr, skb->len + tim_len))) | 
|  | goto err; | 
|  | priv->tx(dev, skb); | 
|  |  | 
|  | queue_delayed_work(dev->workqueue, &priv->work, | 
|  | msecs_to_jiffies(P54_TX_FRAME_LIFETIME)); | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  |  | 
|  | err: | 
|  | skb_pull(skb, sizeof(*hdr) + sizeof(*txhdr) + padding); | 
|  | current_queue->len--; | 
|  | current_queue->count--; | 
|  | return NETDEV_TX_BUSY; | 
|  | } | 
|  |  | 
|  | static int p54_setup_mac(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *skb; | 
|  | struct p54_setup_mac *setup; | 
|  | u16 mode; | 
|  |  | 
|  | skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*setup), | 
|  | P54_CONTROL_TYPE_SETUP, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | setup = (struct p54_setup_mac *) skb_put(skb, sizeof(*setup)); | 
|  | if (dev->conf.radio_enabled) { | 
|  | switch (priv->mode) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | mode = P54_FILTER_TYPE_STATION; | 
|  | break; | 
|  | case NL80211_IFTYPE_AP: | 
|  | mode = P54_FILTER_TYPE_AP; | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | mode = P54_FILTER_TYPE_IBSS; | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | mode = P54_FILTER_TYPE_PROMISCUOUS; | 
|  | break; | 
|  | default: | 
|  | mode = P54_FILTER_TYPE_HIBERNATE; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * "TRANSPARENT and PROMISCUOUS are mutually exclusive" | 
|  | * STSW45X0C LMAC API - page 12 | 
|  | */ | 
|  | if (((priv->filter_flags & FIF_PROMISC_IN_BSS) || | 
|  | (priv->filter_flags & FIF_OTHER_BSS)) && | 
|  | (mode != P54_FILTER_TYPE_PROMISCUOUS)) | 
|  | mode |= P54_FILTER_TYPE_TRANSPARENT; | 
|  | } else | 
|  | mode = P54_FILTER_TYPE_HIBERNATE; | 
|  |  | 
|  | setup->mac_mode = cpu_to_le16(mode); | 
|  | memcpy(setup->mac_addr, priv->mac_addr, ETH_ALEN); | 
|  | memcpy(setup->bssid, priv->bssid, ETH_ALEN); | 
|  | setup->rx_antenna = 2 & priv->rx_diversity_mask; /* automatic */ | 
|  | setup->rx_align = 0; | 
|  | if (priv->fw_var < 0x500) { | 
|  | setup->v1.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask); | 
|  | memset(setup->v1.rts_rates, 0, 8); | 
|  | setup->v1.rx_addr = cpu_to_le32(priv->rx_end); | 
|  | setup->v1.max_rx = cpu_to_le16(priv->rx_mtu); | 
|  | setup->v1.rxhw = cpu_to_le16(priv->rxhw); | 
|  | setup->v1.wakeup_timer = cpu_to_le16(priv->wakeup_timer); | 
|  | setup->v1.unalloc0 = cpu_to_le16(0); | 
|  | } else { | 
|  | setup->v2.rx_addr = cpu_to_le32(priv->rx_end); | 
|  | setup->v2.max_rx = cpu_to_le16(priv->rx_mtu); | 
|  | setup->v2.rxhw = cpu_to_le16(priv->rxhw); | 
|  | setup->v2.timer = cpu_to_le16(priv->wakeup_timer); | 
|  | setup->v2.truncate = cpu_to_le16(48896); | 
|  | setup->v2.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask); | 
|  | setup->v2.sbss_offset = 0; | 
|  | setup->v2.mcast_window = 0; | 
|  | setup->v2.rx_rssi_threshold = 0; | 
|  | setup->v2.rx_ed_threshold = 0; | 
|  | setup->v2.ref_clock = cpu_to_le32(644245094); | 
|  | setup->v2.lpf_bandwidth = cpu_to_le16(65535); | 
|  | setup->v2.osc_start_delay = cpu_to_le16(65535); | 
|  | } | 
|  | priv->tx(dev, skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int p54_scan(struct ieee80211_hw *dev, u16 mode, u16 dwell) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *skb; | 
|  | struct p54_hdr *hdr; | 
|  | struct p54_scan_head *head; | 
|  | struct p54_iq_autocal_entry *iq_autocal; | 
|  | union p54_scan_body_union *body; | 
|  | struct p54_scan_tail_rate *rate; | 
|  | struct pda_rssi_cal_entry *rssi; | 
|  | unsigned int i; | 
|  | void *entry; | 
|  | int band = dev->conf.channel->band; | 
|  | __le16 freq = cpu_to_le16(dev->conf.channel->center_freq); | 
|  |  | 
|  | skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*head) + | 
|  | 2 + sizeof(*iq_autocal) + sizeof(*body) + | 
|  | sizeof(*rate) + 2 * sizeof(*rssi), | 
|  | P54_CONTROL_TYPE_SCAN, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | head = (struct p54_scan_head *) skb_put(skb, sizeof(*head)); | 
|  | memset(head->scan_params, 0, sizeof(head->scan_params)); | 
|  | head->mode = cpu_to_le16(mode); | 
|  | head->dwell = cpu_to_le16(dwell); | 
|  | head->freq = freq; | 
|  |  | 
|  | if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) { | 
|  | __le16 *pa_power_points = (__le16 *) skb_put(skb, 2); | 
|  | *pa_power_points = cpu_to_le16(0x0c); | 
|  | } | 
|  |  | 
|  | iq_autocal = (void *) skb_put(skb, sizeof(*iq_autocal)); | 
|  | for (i = 0; i < priv->iq_autocal_len; i++) { | 
|  | if (priv->iq_autocal[i].freq != freq) | 
|  | continue; | 
|  |  | 
|  | memcpy(iq_autocal, &priv->iq_autocal[i].params, | 
|  | sizeof(struct p54_iq_autocal_entry)); | 
|  | break; | 
|  | } | 
|  | if (i == priv->iq_autocal_len) | 
|  | goto err; | 
|  |  | 
|  | if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) | 
|  | body = (void *) skb_put(skb, sizeof(body->longbow)); | 
|  | else | 
|  | body = (void *) skb_put(skb, sizeof(body->normal)); | 
|  |  | 
|  | for (i = 0; i < priv->output_limit->entries; i++) { | 
|  | __le16 *entry_freq = (void *) (priv->output_limit->data + | 
|  | priv->output_limit->entry_size * i); | 
|  |  | 
|  | if (*entry_freq != freq) | 
|  | continue; | 
|  |  | 
|  | if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) { | 
|  | memcpy(&body->longbow.power_limits, | 
|  | (void *) entry_freq + sizeof(__le16), | 
|  | priv->output_limit->entry_size); | 
|  | } else { | 
|  | struct pda_channel_output_limit *limits = | 
|  | (void *) entry_freq; | 
|  |  | 
|  | body->normal.val_barker = 0x38; | 
|  | body->normal.val_bpsk = body->normal.dup_bpsk = | 
|  | limits->val_bpsk; | 
|  | body->normal.val_qpsk = body->normal.dup_qpsk = | 
|  | limits->val_qpsk; | 
|  | body->normal.val_16qam = body->normal.dup_16qam = | 
|  | limits->val_16qam; | 
|  | body->normal.val_64qam = body->normal.dup_64qam = | 
|  | limits->val_64qam; | 
|  | } | 
|  | break; | 
|  | } | 
|  | if (i == priv->output_limit->entries) | 
|  | goto err; | 
|  |  | 
|  | entry = (void *)(priv->curve_data->data + priv->curve_data->offset); | 
|  | for (i = 0; i < priv->curve_data->entries; i++) { | 
|  | if (*((__le16 *)entry) != freq) { | 
|  | entry += priv->curve_data->entry_size; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) { | 
|  | memcpy(&body->longbow.curve_data, | 
|  | (void *) entry + sizeof(__le16), | 
|  | priv->curve_data->entry_size); | 
|  | } else { | 
|  | struct p54_scan_body *chan = &body->normal; | 
|  | struct pda_pa_curve_data *curve_data = | 
|  | (void *) priv->curve_data->data; | 
|  |  | 
|  | entry += sizeof(__le16); | 
|  | chan->pa_points_per_curve = 8; | 
|  | memset(chan->curve_data, 0, sizeof(*chan->curve_data)); | 
|  | memcpy(chan->curve_data, entry, | 
|  | sizeof(struct p54_pa_curve_data_sample) * | 
|  | min((u8)8, curve_data->points_per_channel)); | 
|  | } | 
|  | break; | 
|  | } | 
|  | if (i == priv->curve_data->entries) | 
|  | goto err; | 
|  |  | 
|  | if ((priv->fw_var >= 0x500) && (priv->fw_var < 0x509)) { | 
|  | rate = (void *) skb_put(skb, sizeof(*rate)); | 
|  | rate->basic_rate_mask = cpu_to_le32(priv->basic_rate_mask); | 
|  | for (i = 0; i < sizeof(rate->rts_rates); i++) | 
|  | rate->rts_rates[i] = i; | 
|  | } | 
|  |  | 
|  | rssi = (struct pda_rssi_cal_entry *) skb_put(skb, sizeof(*rssi)); | 
|  | rssi->mul = cpu_to_le16(priv->rssical_db[band].mul); | 
|  | rssi->add = cpu_to_le16(priv->rssical_db[band].add); | 
|  | if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) { | 
|  | /* Longbow frontend needs ever more */ | 
|  | rssi = (void *) skb_put(skb, sizeof(*rssi)); | 
|  | rssi->mul = cpu_to_le16(priv->rssical_db[band].longbow_unkn); | 
|  | rssi->add = cpu_to_le16(priv->rssical_db[band].longbow_unk2); | 
|  | } | 
|  |  | 
|  | if (priv->fw_var >= 0x509) { | 
|  | rate = (void *) skb_put(skb, sizeof(*rate)); | 
|  | rate->basic_rate_mask = cpu_to_le32(priv->basic_rate_mask); | 
|  | for (i = 0; i < sizeof(rate->rts_rates); i++) | 
|  | rate->rts_rates[i] = i; | 
|  | } | 
|  |  | 
|  | hdr = (struct p54_hdr *) skb->data; | 
|  | hdr->len = cpu_to_le16(skb->len - sizeof(*hdr)); | 
|  |  | 
|  | priv->tx(dev, skb); | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy)); | 
|  | p54_free_skb(dev, skb); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int p54_set_leds(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *skb; | 
|  | struct p54_led *led; | 
|  |  | 
|  | skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*led), | 
|  | P54_CONTROL_TYPE_LED, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | led = (struct p54_led *) skb_put(skb, sizeof(*led)); | 
|  | led->flags = cpu_to_le16(0x0003); | 
|  | led->mask[0] = led->mask[1] = cpu_to_le16(priv->softled_state); | 
|  | led->delay[0] = cpu_to_le16(1); | 
|  | led->delay[1] = cpu_to_le16(0); | 
|  | priv->tx(dev, skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define P54_SET_QUEUE(queue, ai_fs, cw_min, cw_max, _txop)	\ | 
|  | do {	 							\ | 
|  | queue.aifs = cpu_to_le16(ai_fs);			\ | 
|  | queue.cwmin = cpu_to_le16(cw_min);			\ | 
|  | queue.cwmax = cpu_to_le16(cw_max);			\ | 
|  | queue.txop = cpu_to_le16(_txop);			\ | 
|  | } while(0) | 
|  |  | 
|  | static int p54_set_edcf(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *skb; | 
|  | struct p54_edcf *edcf; | 
|  |  | 
|  | skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*edcf), | 
|  | P54_CONTROL_TYPE_DCFINIT, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | edcf = (struct p54_edcf *)skb_put(skb, sizeof(*edcf)); | 
|  | if (priv->use_short_slot) { | 
|  | edcf->slottime = 9; | 
|  | edcf->sifs = 0x10; | 
|  | edcf->eofpad = 0x00; | 
|  | } else { | 
|  | edcf->slottime = 20; | 
|  | edcf->sifs = 0x0a; | 
|  | edcf->eofpad = 0x06; | 
|  | } | 
|  | /* (see prism54/isl_oid.h for further details) */ | 
|  | edcf->frameburst = cpu_to_le16(0); | 
|  | edcf->round_trip_delay = cpu_to_le16(0); | 
|  | edcf->flags = 0; | 
|  | memset(edcf->mapping, 0, sizeof(edcf->mapping)); | 
|  | memcpy(edcf->queue, priv->qos_params, sizeof(edcf->queue)); | 
|  | priv->tx(dev, skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int p54_set_ps(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *skb; | 
|  | struct p54_psm *psm; | 
|  | u16 mode; | 
|  | int i; | 
|  |  | 
|  | if (dev->conf.flags & IEEE80211_CONF_PS) | 
|  | mode = P54_PSM | P54_PSM_DTIM | P54_PSM_MCBC; | 
|  | else | 
|  | mode = P54_PSM_CAM; | 
|  |  | 
|  | skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*psm), | 
|  | P54_CONTROL_TYPE_PSM, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | psm = (struct p54_psm *)skb_put(skb, sizeof(*psm)); | 
|  | psm->mode = cpu_to_le16(mode); | 
|  | psm->aid = cpu_to_le16(priv->aid); | 
|  | for (i = 0; i < ARRAY_SIZE(psm->intervals); i++) { | 
|  | psm->intervals[i].interval = | 
|  | cpu_to_le16(dev->conf.listen_interval); | 
|  | psm->intervals[i].periods = cpu_to_le16(1); | 
|  | } | 
|  |  | 
|  | psm->beacon_rssi_skip_max = 60; | 
|  | psm->rssi_delta_threshold = 0; | 
|  | psm->nr = 0; | 
|  |  | 
|  | priv->tx(dev, skb); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int p54_beacon_tim(struct sk_buff *skb) | 
|  | { | 
|  | /* | 
|  | * the good excuse for this mess is ... the firmware. | 
|  | * The dummy TIM MUST be at the end of the beacon frame, | 
|  | * because it'll be overwritten! | 
|  | */ | 
|  |  | 
|  | struct ieee80211_mgmt *mgmt = (void *)skb->data; | 
|  | u8 *pos, *end; | 
|  |  | 
|  | if (skb->len <= sizeof(mgmt)) | 
|  | return -EINVAL; | 
|  |  | 
|  | pos = (u8 *)mgmt->u.beacon.variable; | 
|  | end = skb->data + skb->len; | 
|  | while (pos < end) { | 
|  | if (pos + 2 + pos[1] > end) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (pos[0] == WLAN_EID_TIM) { | 
|  | u8 dtim_len = pos[1]; | 
|  | u8 dtim_period = pos[3]; | 
|  | u8 *next = pos + 2 + dtim_len; | 
|  |  | 
|  | if (dtim_len < 3) | 
|  | return -EINVAL; | 
|  |  | 
|  | memmove(pos, next, end - next); | 
|  |  | 
|  | if (dtim_len > 3) | 
|  | skb_trim(skb, skb->len - (dtim_len - 3)); | 
|  |  | 
|  | pos = end - (dtim_len + 2); | 
|  |  | 
|  | /* add the dummy at the end */ | 
|  | pos[0] = WLAN_EID_TIM; | 
|  | pos[1] = 3; | 
|  | pos[2] = 0; | 
|  | pos[3] = dtim_period; | 
|  | pos[4] = 0; | 
|  | return 0; | 
|  | } | 
|  | pos += 2 + pos[1]; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int p54_beacon_update(struct ieee80211_hw *dev, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *beacon; | 
|  | int ret; | 
|  |  | 
|  | if (priv->cached_beacon) { | 
|  | p54_tx_cancel(dev, priv->cached_beacon); | 
|  | /* wait for the last beacon the be freed */ | 
|  | msleep(10); | 
|  | } | 
|  |  | 
|  | beacon = ieee80211_beacon_get(dev, vif); | 
|  | if (!beacon) | 
|  | return -ENOMEM; | 
|  | ret = p54_beacon_tim(beacon); | 
|  | if (ret) | 
|  | return ret; | 
|  | ret = p54_tx(dev, beacon); | 
|  | if (ret) | 
|  | return ret; | 
|  | priv->cached_beacon = beacon; | 
|  | priv->tsf_high32 = 0; | 
|  | priv->tsf_low32 = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int p54_start(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | int err; | 
|  |  | 
|  | mutex_lock(&priv->conf_mutex); | 
|  | err = priv->open(dev); | 
|  | if (err) | 
|  | goto out; | 
|  | P54_SET_QUEUE(priv->qos_params[0], 0x0002, 0x0003, 0x0007, 47); | 
|  | P54_SET_QUEUE(priv->qos_params[1], 0x0002, 0x0007, 0x000f, 94); | 
|  | P54_SET_QUEUE(priv->qos_params[2], 0x0003, 0x000f, 0x03ff, 0); | 
|  | P54_SET_QUEUE(priv->qos_params[3], 0x0007, 0x000f, 0x03ff, 0); | 
|  | err = p54_set_edcf(dev); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | memset(priv->bssid, ~0, ETH_ALEN); | 
|  | priv->mode = NL80211_IFTYPE_MONITOR; | 
|  | err = p54_setup_mac(dev); | 
|  | if (err) { | 
|  | priv->mode = NL80211_IFTYPE_UNSPECIFIED; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | queue_delayed_work(dev->workqueue, &priv->work, 0); | 
|  |  | 
|  | priv->softled_state = 0; | 
|  | err = p54_set_leds(dev); | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&priv->conf_mutex); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void p54_stop(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | mutex_lock(&priv->conf_mutex); | 
|  | priv->mode = NL80211_IFTYPE_UNSPECIFIED; | 
|  | priv->softled_state = 0; | 
|  | p54_set_leds(dev); | 
|  |  | 
|  | cancel_delayed_work_sync(&priv->work); | 
|  | if (priv->cached_beacon) | 
|  | p54_tx_cancel(dev, priv->cached_beacon); | 
|  |  | 
|  | priv->stop(dev); | 
|  | while ((skb = skb_dequeue(&priv->tx_queue))) | 
|  | kfree_skb(skb); | 
|  | priv->cached_beacon = NULL; | 
|  | priv->tsf_high32 = priv->tsf_low32 = 0; | 
|  | mutex_unlock(&priv->conf_mutex); | 
|  | } | 
|  |  | 
|  | static int p54_add_interface(struct ieee80211_hw *dev, | 
|  | struct ieee80211_if_init_conf *conf) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  |  | 
|  | mutex_lock(&priv->conf_mutex); | 
|  | if (priv->mode != NL80211_IFTYPE_MONITOR) { | 
|  | mutex_unlock(&priv->conf_mutex); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | switch (conf->type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | priv->mode = conf->type; | 
|  | break; | 
|  | default: | 
|  | mutex_unlock(&priv->conf_mutex); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); | 
|  | p54_setup_mac(dev); | 
|  | mutex_unlock(&priv->conf_mutex); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void p54_remove_interface(struct ieee80211_hw *dev, | 
|  | struct ieee80211_if_init_conf *conf) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  |  | 
|  | mutex_lock(&priv->conf_mutex); | 
|  | if (priv->cached_beacon) | 
|  | p54_tx_cancel(dev, priv->cached_beacon); | 
|  | priv->mode = NL80211_IFTYPE_MONITOR; | 
|  | memset(priv->mac_addr, 0, ETH_ALEN); | 
|  | memset(priv->bssid, 0, ETH_ALEN); | 
|  | p54_setup_mac(dev); | 
|  | mutex_unlock(&priv->conf_mutex); | 
|  | } | 
|  |  | 
|  | static int p54_config(struct ieee80211_hw *dev, u32 changed) | 
|  | { | 
|  | int ret = 0; | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct ieee80211_conf *conf = &dev->conf; | 
|  |  | 
|  | mutex_lock(&priv->conf_mutex); | 
|  | if (changed & IEEE80211_CONF_CHANGE_POWER) | 
|  | priv->output_power = conf->power_level << 2; | 
|  | if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) { | 
|  | ret = p54_setup_mac(dev); | 
|  | if (ret) | 
|  | goto out; | 
|  | } | 
|  | if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { | 
|  | ret = p54_scan(dev, P54_SCAN_EXIT, 0); | 
|  | if (ret) | 
|  | goto out; | 
|  | } | 
|  | if (changed & IEEE80211_CONF_CHANGE_PS) { | 
|  | ret = p54_set_ps(dev); | 
|  | if (ret) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&priv->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int p54_config_interface(struct ieee80211_hw *dev, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_if_conf *conf) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_lock(&priv->conf_mutex); | 
|  | if (conf->changed & IEEE80211_IFCC_BSSID) { | 
|  | memcpy(priv->bssid, conf->bssid, ETH_ALEN); | 
|  | ret = p54_setup_mac(dev); | 
|  | if (ret) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (conf->changed & IEEE80211_IFCC_BEACON) { | 
|  | ret = p54_scan(dev, P54_SCAN_EXIT, 0); | 
|  | if (ret) | 
|  | goto out; | 
|  | ret = p54_setup_mac(dev); | 
|  | if (ret) | 
|  | goto out; | 
|  | ret = p54_beacon_update(dev, vif); | 
|  | if (ret) | 
|  | goto out; | 
|  | ret = p54_set_edcf(dev); | 
|  | if (ret) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&priv->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void p54_configure_filter(struct ieee80211_hw *dev, | 
|  | unsigned int changed_flags, | 
|  | unsigned int *total_flags, | 
|  | int mc_count, struct dev_mc_list *mclist) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  |  | 
|  | *total_flags &= FIF_PROMISC_IN_BSS | | 
|  | FIF_OTHER_BSS; | 
|  |  | 
|  | priv->filter_flags = *total_flags; | 
|  |  | 
|  | if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) | 
|  | p54_setup_mac(dev); | 
|  | } | 
|  |  | 
|  | static int p54_conf_tx(struct ieee80211_hw *dev, u16 queue, | 
|  | const struct ieee80211_tx_queue_params *params) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&priv->conf_mutex); | 
|  | if ((params) && !(queue > 4)) { | 
|  | P54_SET_QUEUE(priv->qos_params[queue], params->aifs, | 
|  | params->cw_min, params->cw_max, params->txop); | 
|  | ret = p54_set_edcf(dev); | 
|  | } else | 
|  | ret = -EINVAL; | 
|  | mutex_unlock(&priv->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int p54_init_xbow_synth(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *skb; | 
|  | struct p54_xbow_synth *xbow; | 
|  |  | 
|  | skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*xbow), | 
|  | P54_CONTROL_TYPE_XBOW_SYNTH_CFG, GFP_KERNEL); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | xbow = (struct p54_xbow_synth *)skb_put(skb, sizeof(*xbow)); | 
|  | xbow->magic1 = cpu_to_le16(0x1); | 
|  | xbow->magic2 = cpu_to_le16(0x2); | 
|  | xbow->freq = cpu_to_le16(5390); | 
|  | memset(xbow->padding, 0, sizeof(xbow->padding)); | 
|  | priv->tx(dev, skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void p54_work(struct work_struct *work) | 
|  | { | 
|  | struct p54_common *priv = container_of(work, struct p54_common, | 
|  | work.work); | 
|  | struct ieee80211_hw *dev = priv->hw; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) | 
|  | return ; | 
|  |  | 
|  | /* | 
|  | * TODO: walk through tx_queue and do the following tasks | 
|  | * 	1. initiate bursts. | 
|  | *      2. cancel stuck frames / reset the device if necessary. | 
|  | */ | 
|  |  | 
|  | skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL, | 
|  | sizeof(struct p54_statistics), | 
|  | P54_CONTROL_TYPE_STAT_READBACK, GFP_KERNEL); | 
|  | if (!skb) | 
|  | return ; | 
|  |  | 
|  | priv->tx(dev, skb); | 
|  | } | 
|  |  | 
|  | static int p54_get_stats(struct ieee80211_hw *dev, | 
|  | struct ieee80211_low_level_stats *stats) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  |  | 
|  | memcpy(stats, &priv->stats, sizeof(*stats)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int p54_get_tx_stats(struct ieee80211_hw *dev, | 
|  | struct ieee80211_tx_queue_stats *stats) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  |  | 
|  | memcpy(stats, &priv->tx_stats[P54_QUEUE_DATA], | 
|  | sizeof(stats[0]) * dev->queues); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void p54_bss_info_changed(struct ieee80211_hw *dev, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_bss_conf *info, | 
|  | u32 changed) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  |  | 
|  | if (changed & BSS_CHANGED_ERP_SLOT) { | 
|  | priv->use_short_slot = info->use_short_slot; | 
|  | p54_set_edcf(dev); | 
|  | } | 
|  | if (changed & BSS_CHANGED_BASIC_RATES) { | 
|  | if (dev->conf.channel->band == IEEE80211_BAND_5GHZ) | 
|  | priv->basic_rate_mask = (info->basic_rates << 4); | 
|  | else | 
|  | priv->basic_rate_mask = info->basic_rates; | 
|  | p54_setup_mac(dev); | 
|  | if (priv->fw_var >= 0x500) | 
|  | p54_scan(dev, P54_SCAN_EXIT, 0); | 
|  | } | 
|  | if (changed & BSS_CHANGED_ASSOC) { | 
|  | if (info->assoc) { | 
|  | priv->aid = info->aid; | 
|  | priv->wakeup_timer = info->beacon_int * | 
|  | info->dtim_period * 5; | 
|  | p54_setup_mac(dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, | 
|  | struct ieee80211_vif *vif, struct ieee80211_sta *sta, | 
|  | struct ieee80211_key_conf *key) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | struct sk_buff *skb; | 
|  | struct p54_keycache *rxkey; | 
|  | u8 algo = 0; | 
|  |  | 
|  | if (modparam_nohwcrypt) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (cmd == DISABLE_KEY) | 
|  | algo = 0; | 
|  | else { | 
|  | switch (key->alg) { | 
|  | case ALG_TKIP: | 
|  | if (!(priv->privacy_caps & (BR_DESC_PRIV_CAP_MICHAEL | | 
|  | BR_DESC_PRIV_CAP_TKIP))) | 
|  | return -EOPNOTSUPP; | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | 
|  | algo = P54_CRYPTO_TKIPMICHAEL; | 
|  | break; | 
|  | case ALG_WEP: | 
|  | if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP)) | 
|  | return -EOPNOTSUPP; | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | 
|  | algo = P54_CRYPTO_WEP; | 
|  | break; | 
|  | case ALG_CCMP: | 
|  | if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)) | 
|  | return -EOPNOTSUPP; | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | 
|  | algo = P54_CRYPTO_AESCCMP; | 
|  | break; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (key->keyidx > priv->rx_keycache_size) { | 
|  | /* | 
|  | * The device supports the choosen algorithm, but the firmware | 
|  | * does not provide enough key slots to store all of them. | 
|  | * So, incoming frames have to be decoded by the mac80211 stack, | 
|  | * but we can still offload encryption for outgoing frames. | 
|  | */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | mutex_lock(&priv->conf_mutex); | 
|  | skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*rxkey), | 
|  | P54_CONTROL_TYPE_RX_KEYCACHE, GFP_ATOMIC); | 
|  | if (!skb) { | 
|  | mutex_unlock(&priv->conf_mutex); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* TODO: some devices have 4 more free slots for rx keys */ | 
|  | rxkey = (struct p54_keycache *)skb_put(skb, sizeof(*rxkey)); | 
|  | rxkey->entry = key->keyidx; | 
|  | rxkey->key_id = key->keyidx; | 
|  | rxkey->key_type = algo; | 
|  | if (sta) | 
|  | memcpy(rxkey->mac, sta->addr, ETH_ALEN); | 
|  | else | 
|  | memset(rxkey->mac, ~0, ETH_ALEN); | 
|  | if (key->alg != ALG_TKIP) { | 
|  | rxkey->key_len = min((u8)16, key->keylen); | 
|  | memcpy(rxkey->key, key->key, rxkey->key_len); | 
|  | } else { | 
|  | rxkey->key_len = 24; | 
|  | memcpy(rxkey->key, key->key, 16); | 
|  | memcpy(&(rxkey->key[16]), &(key->key | 
|  | [NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY]), 8); | 
|  | } | 
|  |  | 
|  | priv->tx(dev, skb); | 
|  | mutex_unlock(&priv->conf_mutex); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_P54_LEDS | 
|  | static void p54_led_brightness_set(struct led_classdev *led_dev, | 
|  | enum led_brightness brightness) | 
|  | { | 
|  | struct p54_led_dev *led = container_of(led_dev, struct p54_led_dev, | 
|  | led_dev); | 
|  | struct ieee80211_hw *dev = led->hw_dev; | 
|  | struct p54_common *priv = dev->priv; | 
|  | int err; | 
|  |  | 
|  | /* Don't toggle the LED, when the device is down. */ | 
|  | if (priv->mode == NL80211_IFTYPE_UNSPECIFIED) | 
|  | return ; | 
|  |  | 
|  | if (brightness != LED_OFF) | 
|  | priv->softled_state |= BIT(led->index); | 
|  | else | 
|  | priv->softled_state &= ~BIT(led->index); | 
|  |  | 
|  | err = p54_set_leds(dev); | 
|  | if (err && net_ratelimit()) | 
|  | printk(KERN_ERR "%s: failed to update %s LED.\n", | 
|  | wiphy_name(dev->wiphy), led_dev->name); | 
|  | } | 
|  |  | 
|  | static int p54_register_led(struct ieee80211_hw *dev, | 
|  | struct p54_led_dev *led, | 
|  | unsigned int led_index, | 
|  | char *name, char *trigger) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (led->registered) | 
|  | return -EEXIST; | 
|  |  | 
|  | snprintf(led->name, sizeof(led->name), "p54-%s::%s", | 
|  | wiphy_name(dev->wiphy), name); | 
|  | led->hw_dev = dev; | 
|  | led->index = led_index; | 
|  | led->led_dev.name = led->name; | 
|  | led->led_dev.default_trigger = trigger; | 
|  | led->led_dev.brightness_set = p54_led_brightness_set; | 
|  |  | 
|  | err = led_classdev_register(wiphy_dev(dev->wiphy), &led->led_dev); | 
|  | if (err) | 
|  | printk(KERN_ERR "%s: Failed to register %s LED.\n", | 
|  | wiphy_name(dev->wiphy), name); | 
|  | else | 
|  | led->registered = 1; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int p54_init_leds(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | int err; | 
|  |  | 
|  | /* | 
|  | * TODO: | 
|  | * Figure out if the EEPROM contains some hints about the number | 
|  | * of available/programmable LEDs of the device. | 
|  | * But for now, we can assume that we have two programmable LEDs. | 
|  | */ | 
|  |  | 
|  | err = p54_register_led(dev, &priv->assoc_led, 0, "assoc", | 
|  | ieee80211_get_assoc_led_name(dev)); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = p54_register_led(dev, &priv->tx_led, 1, "tx", | 
|  | ieee80211_get_tx_led_name(dev)); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = p54_set_leds(dev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void p54_unregister_leds(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  |  | 
|  | if (priv->tx_led.registered) | 
|  | led_classdev_unregister(&priv->tx_led.led_dev); | 
|  | if (priv->assoc_led.registered) | 
|  | led_classdev_unregister(&priv->assoc_led.led_dev); | 
|  | } | 
|  | #endif /* CONFIG_P54_LEDS */ | 
|  |  | 
|  | static const struct ieee80211_ops p54_ops = { | 
|  | .tx			= p54_tx, | 
|  | .start			= p54_start, | 
|  | .stop			= p54_stop, | 
|  | .add_interface		= p54_add_interface, | 
|  | .remove_interface	= p54_remove_interface, | 
|  | .set_tim		= p54_set_tim, | 
|  | .sta_notify		= p54_sta_notify, | 
|  | .set_key		= p54_set_key, | 
|  | .config			= p54_config, | 
|  | .config_interface	= p54_config_interface, | 
|  | .bss_info_changed	= p54_bss_info_changed, | 
|  | .configure_filter	= p54_configure_filter, | 
|  | .conf_tx		= p54_conf_tx, | 
|  | .get_stats		= p54_get_stats, | 
|  | .get_tx_stats		= p54_get_tx_stats | 
|  | }; | 
|  |  | 
|  | struct ieee80211_hw *p54_init_common(size_t priv_data_len) | 
|  | { | 
|  | struct ieee80211_hw *dev; | 
|  | struct p54_common *priv; | 
|  |  | 
|  | dev = ieee80211_alloc_hw(priv_data_len, &p54_ops); | 
|  | if (!dev) | 
|  | return NULL; | 
|  |  | 
|  | priv = dev->priv; | 
|  | priv->hw = dev; | 
|  | priv->mode = NL80211_IFTYPE_UNSPECIFIED; | 
|  | priv->basic_rate_mask = 0x15f; | 
|  | skb_queue_head_init(&priv->tx_queue); | 
|  | dev->flags = IEEE80211_HW_RX_INCLUDES_FCS | | 
|  | IEEE80211_HW_SUPPORTS_PS | | 
|  | IEEE80211_HW_PS_NULLFUNC_STACK | | 
|  | IEEE80211_HW_SIGNAL_DBM | | 
|  | IEEE80211_HW_NOISE_DBM; | 
|  |  | 
|  | dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | | 
|  | BIT(NL80211_IFTYPE_ADHOC) | | 
|  | BIT(NL80211_IFTYPE_AP) | | 
|  | BIT(NL80211_IFTYPE_MESH_POINT); | 
|  |  | 
|  | dev->channel_change_time = 1000;	/* TODO: find actual value */ | 
|  | priv->tx_stats[P54_QUEUE_BEACON].limit = 1; | 
|  | priv->tx_stats[P54_QUEUE_FWSCAN].limit = 1; | 
|  | priv->tx_stats[P54_QUEUE_MGMT].limit = 3; | 
|  | priv->tx_stats[P54_QUEUE_CAB].limit = 3; | 
|  | priv->tx_stats[P54_QUEUE_DATA].limit = 5; | 
|  | dev->queues = 1; | 
|  | priv->noise = -94; | 
|  | /* | 
|  | * We support at most 8 tries no matter which rate they're at, | 
|  | * we cannot support max_rates * max_rate_tries as we set it | 
|  | * here, but setting it correctly to 4/2 or so would limit us | 
|  | * artificially if the RC algorithm wants just two rates, so | 
|  | * let's say 4/7, we'll redistribute it at TX time, see the | 
|  | * comments there. | 
|  | */ | 
|  | dev->max_rates = 4; | 
|  | dev->max_rate_tries = 7; | 
|  | dev->extra_tx_headroom = sizeof(struct p54_hdr) + 4 + | 
|  | sizeof(struct p54_tx_data); | 
|  |  | 
|  | mutex_init(&priv->conf_mutex); | 
|  | init_completion(&priv->eeprom_comp); | 
|  | INIT_DELAYED_WORK(&priv->work, p54_work); | 
|  |  | 
|  | return dev; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(p54_init_common); | 
|  |  | 
|  | int p54_register_common(struct ieee80211_hw *dev, struct device *pdev) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = ieee80211_register_hw(dev); | 
|  | if (err) { | 
|  | dev_err(pdev, "Cannot register device (%d).\n", err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_P54_LEDS | 
|  | err = p54_init_leds(dev); | 
|  | if (err) | 
|  | return err; | 
|  | #endif /* CONFIG_P54_LEDS */ | 
|  |  | 
|  | dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy)); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(p54_register_common); | 
|  |  | 
|  | void p54_free_common(struct ieee80211_hw *dev) | 
|  | { | 
|  | struct p54_common *priv = dev->priv; | 
|  | kfree(priv->iq_autocal); | 
|  | kfree(priv->output_limit); | 
|  | kfree(priv->curve_data); | 
|  |  | 
|  | #ifdef CONFIG_P54_LEDS | 
|  | p54_unregister_leds(dev); | 
|  | #endif /* CONFIG_P54_LEDS */ | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(p54_free_common); | 
|  |  | 
|  | static int __init p54_init(void) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit p54_exit(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | module_init(p54_init); | 
|  | module_exit(p54_exit); |