[MIPS] DBAu1xx0 code style cleanup
Fix several errors and warnings given by checkpatch.pl:
- macros with complex values not enclosed in parentheses;
- leading spaces instead of tabs;
- printk() without KERN_* facility level;
- using simple_strtol() where strict_strtol() could be used;
- line over 80 characters.
In addition to these changes, also do the following:
- initialize variable instead of assigning value later where it makes sense;
- insert spaces between operator and its operands, also remove excess spaces
there;
- remove unneeded numeric literal type casts;
- remove needless parentheses;
- remove space after the type cast's closing parenthesis;
- insert missing space before closing brace in the array initializers;
- replace spaces after the macro name with tabs in the #define directives;
- remove excess tabs after the macro name in the #define directives;
- fix typos/errors, capitalize acronyms, etc. in the comments;
- make the multi-line comment style consistent with the kernel style elsewhere
by adding empty first/last line;
- update MontaVista copyright;
- remove Pete Popov's old email address...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile
index 51d62bd..274db3b 100644
--- a/arch/mips/au1000/db1x00/Makefile
+++ b/arch/mips/au1000/db1x00/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Semiconductor Db1x00 board.
+# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
+#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c
index b7dcbad..9e5ccbb 100644
--- a/arch/mips/au1000/db1x00/board_setup.c
+++ b/arch/mips/au1000/db1x00/board_setup.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* Alchemy Db1x00 board setup.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -37,49 +36,49 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
+ /* Hit BCSR.SW_RESET[RESET] */
bcsr->swreset = 0x0000;
}
void __init board_setup(void)
{
- u32 pin_func;
+ u32 pin_func = 0;
- pin_func = 0;
- /* not valid for 1550 */
-
-#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
- /* set IRFIRSEL instead of GPIO15 */
- pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
+ /* Not valid for Au1550 */
+#if defined(CONFIG_IRDA) && \
+ (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
+ /* Set IRFIRSEL instead of GPIO15 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
au_writel(pin_func, SYS_PINFUNC);
- /* power off until the driver is in use */
+ /* Power off until the driver is in use */
bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
- bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
+ bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
au_sync();
#endif
bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
#ifdef CONFIG_MIPS_MIRAGE
- /* enable GPIO[31:0] inputs */
+ /* Enable GPIO[31:0] inputs */
au_writel(0, SYS_PININPUTEN);
- /* GPIO[20] is output, tristate the other input primary GPIO's */
- au_writel((u32)(~(1<<20)), SYS_TRIOUTCLR);
+ /* GPIO[20] is output, tristate the other input primary GPIOs */
+ au_writel(~(1 << 20), SYS_TRIOUTCLR);
- /* set GPIO[210:208] instead of SSI_0 */
- pin_func = au_readl(SYS_PINFUNC) | (u32)(1);
+ /* Set GPIO[210:208] instead of SSI_0 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
- /* set GPIO[215:211] for LED's */
- pin_func |= (u32)((5<<2));
+ /* Set GPIO[215:211] for LEDs */
+ pin_func |= 5 << 2;
- /* set GPIO[214:213] for more LED's */
- pin_func |= (u32)((5<<12));
+ /* Set GPIO[214:213] for more LEDs */
+ pin_func |= 5 << 12;
- /* set GPIO[207:200] instead of PCMCIA/LCD */
- pin_func |= (u32)((3<<17));
+ /* Set GPIO[207:200] instead of PCMCIA/LCD */
+ pin_func |= SYS_PF_LCD | SYS_PF_PC;
au_writel(pin_func, SYS_PINFUNC);
- /* Enable speaker amplifier. This should
+ /*
+ * Enable speaker amplifier. This should
* be part of the audio driver.
*/
au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
@@ -89,21 +88,21 @@
au_sync();
#ifdef CONFIG_MIPS_DB1000
- printk("AMD Alchemy Au1000/Db1000 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1500
- printk("AMD Alchemy Au1500/Db1500 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1100
- printk("AMD Alchemy Au1100/Db1100 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
#endif
#ifdef CONFIG_MIPS_BOSPORUS
- printk("AMD Alchemy Bosporus Board\n");
+ printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
#endif
#ifdef CONFIG_MIPS_MIRAGE
- printk("AMD Alchemy Mirage Board\n");
+ printk(KERN_INFO "AMD Alchemy Mirage Board\n");
#endif
#ifdef CONFIG_MIPS_DB1550
- printk("AMD Alchemy Au1550/Db1550 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
#endif
}
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index d3b967c..5ebe0de 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -2,9 +2,8 @@
* BRIEF MODULE DESCRIPTION
* PB1000 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -49,8 +48,8 @@
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
@@ -58,6 +57,6 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c
index eaa50c7..94c090e 100644
--- a/arch/mips/au1000/db1x00/irqmap.c
+++ b/arch/mips/au1000/db1x00/irqmap.c
@@ -32,32 +32,32 @@
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */
- [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */
- [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */
+ [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
+ [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
+ [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
};
#endif
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+ [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
+ [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif