|  | /****************************************************************************** | 
|  | * This software may be used and distributed according to the terms of | 
|  | * the GNU General Public License (GPL), incorporated herein by reference. | 
|  | * Drivers based on or derived from this code fall under the GPL and must | 
|  | * retain the authorship, copyright and license notice.  This file is not | 
|  | * a complete program and may only be used when the entire operating | 
|  | * system is licensed under the GPL. | 
|  | * See the file COPYING in this distribution for more information. | 
|  | * | 
|  | * vxge-main.c: Driver for Neterion Inc's X3100 Series 10GbE PCIe I/O | 
|  | *              Virtualized Server Adapter. | 
|  | * Copyright(c) 2002-2009 Neterion Inc. | 
|  | * | 
|  | * The module loadable parameters that are supported by the driver and a brief | 
|  | * explanation of all the variables: | 
|  | * vlan_tag_strip: | 
|  | *	Strip VLAN Tag enable/disable. Instructs the device to remove | 
|  | *	the VLAN tag from all received tagged frames that are not | 
|  | *	replicated at the internal L2 switch. | 
|  | *		0 - Do not strip the VLAN tag. | 
|  | *		1 - Strip the VLAN tag. | 
|  | * | 
|  | * addr_learn_en: | 
|  | *	Enable learning the mac address of the guest OS interface in | 
|  | *	a virtualization environment. | 
|  | *		0 - DISABLE | 
|  | *		1 - ENABLE | 
|  | * | 
|  | * max_config_port: | 
|  | *	Maximum number of port to be supported. | 
|  | *		MIN -1 and MAX - 2 | 
|  | * | 
|  | * max_config_vpath: | 
|  | *	This configures the maximum no of VPATH configures for each | 
|  | * 	device function. | 
|  | *		MIN - 1 and MAX - 17 | 
|  | * | 
|  | * max_config_dev: | 
|  | *	This configures maximum no of Device function to be enabled. | 
|  | *		MIN - 1 and MAX - 17 | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | #include <linux/if_vlan.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/tcp.h> | 
|  | #include <net/ip.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include "vxge-main.h" | 
|  | #include "vxge-reg.h" | 
|  |  | 
|  | MODULE_LICENSE("Dual BSD/GPL"); | 
|  | MODULE_DESCRIPTION("Neterion's X3100 Series 10GbE PCIe I/O" | 
|  | "Virtualized Server Adapter"); | 
|  |  | 
|  | static struct pci_device_id vxge_id_table[] __devinitdata = { | 
|  | {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_WIN, PCI_ANY_ID, | 
|  | PCI_ANY_ID}, | 
|  | {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_UNI, PCI_ANY_ID, | 
|  | PCI_ANY_ID}, | 
|  | {0} | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pci, vxge_id_table); | 
|  |  | 
|  | VXGE_MODULE_PARAM_INT(vlan_tag_strip, VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE); | 
|  | VXGE_MODULE_PARAM_INT(addr_learn_en, VXGE_HW_MAC_ADDR_LEARN_DEFAULT); | 
|  | VXGE_MODULE_PARAM_INT(max_config_port, VXGE_MAX_CONFIG_PORT); | 
|  | VXGE_MODULE_PARAM_INT(max_config_vpath, VXGE_USE_DEFAULT); | 
|  | VXGE_MODULE_PARAM_INT(max_mac_vpath, VXGE_MAX_MAC_ADDR_COUNT); | 
|  | VXGE_MODULE_PARAM_INT(max_config_dev, VXGE_MAX_CONFIG_DEV); | 
|  |  | 
|  | static u16 vpath_selector[VXGE_HW_MAX_VIRTUAL_PATHS] = | 
|  | {0, 1, 3, 3, 7, 7, 7, 7, 15, 15, 15, 15, 15, 15, 15, 15, 31}; | 
|  | static unsigned int bw_percentage[VXGE_HW_MAX_VIRTUAL_PATHS] = | 
|  | {[0 ...(VXGE_HW_MAX_VIRTUAL_PATHS - 1)] = 0xFF}; | 
|  | module_param_array(bw_percentage, uint, NULL, 0); | 
|  |  | 
|  | static struct vxge_drv_config *driver_config; | 
|  |  | 
|  | static inline int is_vxge_card_up(struct vxgedev *vdev) | 
|  | { | 
|  | return test_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  | } | 
|  |  | 
|  | static inline void VXGE_COMPLETE_VPATH_TX(struct vxge_fifo *fifo) | 
|  | { | 
|  | unsigned long flags = 0; | 
|  | struct sk_buff **skb_ptr = NULL; | 
|  | struct sk_buff **temp; | 
|  | #define NR_SKB_COMPLETED 128 | 
|  | struct sk_buff *completed[NR_SKB_COMPLETED]; | 
|  | int more; | 
|  |  | 
|  | do { | 
|  | more = 0; | 
|  | skb_ptr = completed; | 
|  |  | 
|  | if (spin_trylock_irqsave(&fifo->tx_lock, flags)) { | 
|  | vxge_hw_vpath_poll_tx(fifo->handle, &skb_ptr, | 
|  | NR_SKB_COMPLETED, &more); | 
|  | spin_unlock_irqrestore(&fifo->tx_lock, flags); | 
|  | } | 
|  | /* free SKBs */ | 
|  | for (temp = completed; temp != skb_ptr; temp++) | 
|  | dev_kfree_skb_irq(*temp); | 
|  | } while (more) ; | 
|  | } | 
|  |  | 
|  | static inline void VXGE_COMPLETE_ALL_TX(struct vxgedev *vdev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* Complete all transmits */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | VXGE_COMPLETE_VPATH_TX(&vdev->vpaths[i].fifo); | 
|  | } | 
|  |  | 
|  | static inline void VXGE_COMPLETE_ALL_RX(struct vxgedev *vdev) | 
|  | { | 
|  | int i; | 
|  | struct vxge_ring *ring; | 
|  |  | 
|  | /* Complete all receives*/ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | ring = &vdev->vpaths[i].ring; | 
|  | vxge_hw_vpath_poll_rx(ring->handle); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * MultiQ manipulation helper functions | 
|  | */ | 
|  | void vxge_stop_all_tx_queue(struct vxgedev *vdev) | 
|  | { | 
|  | int i; | 
|  | struct net_device *dev = vdev->ndev; | 
|  |  | 
|  | if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_STOP; | 
|  | } | 
|  | netif_tx_stop_all_queues(dev); | 
|  | } | 
|  |  | 
|  | void vxge_stop_tx_queue(struct vxge_fifo *fifo) | 
|  | { | 
|  | struct net_device *dev = fifo->ndev; | 
|  |  | 
|  | struct netdev_queue *txq = NULL; | 
|  | if (fifo->tx_steering_type == TX_MULTIQ_STEERING) | 
|  | txq = netdev_get_tx_queue(dev, fifo->driver_id); | 
|  | else { | 
|  | txq = netdev_get_tx_queue(dev, 0); | 
|  | fifo->queue_state = VPATH_QUEUE_STOP; | 
|  | } | 
|  |  | 
|  | netif_tx_stop_queue(txq); | 
|  | } | 
|  |  | 
|  | void vxge_start_all_tx_queue(struct vxgedev *vdev) | 
|  | { | 
|  | int i; | 
|  | struct net_device *dev = vdev->ndev; | 
|  |  | 
|  | if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_START; | 
|  | } | 
|  | netif_tx_start_all_queues(dev); | 
|  | } | 
|  |  | 
|  | static void vxge_wake_all_tx_queue(struct vxgedev *vdev) | 
|  | { | 
|  | int i; | 
|  | struct net_device *dev = vdev->ndev; | 
|  |  | 
|  | if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_START; | 
|  | } | 
|  | netif_tx_wake_all_queues(dev); | 
|  | } | 
|  |  | 
|  | void vxge_wake_tx_queue(struct vxge_fifo *fifo, struct sk_buff *skb) | 
|  | { | 
|  | struct net_device *dev = fifo->ndev; | 
|  |  | 
|  | int vpath_no = fifo->driver_id; | 
|  | struct netdev_queue *txq = NULL; | 
|  | if (fifo->tx_steering_type == TX_MULTIQ_STEERING) { | 
|  | txq = netdev_get_tx_queue(dev, vpath_no); | 
|  | if (netif_tx_queue_stopped(txq)) | 
|  | netif_tx_wake_queue(txq); | 
|  | } else { | 
|  | txq = netdev_get_tx_queue(dev, 0); | 
|  | if (fifo->queue_state == VPATH_QUEUE_STOP) | 
|  | if (netif_tx_queue_stopped(txq)) { | 
|  | fifo->queue_state = VPATH_QUEUE_START; | 
|  | netif_tx_wake_queue(txq); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_callback_link_up | 
|  | * | 
|  | * This function is called during interrupt context to notify link up state | 
|  | * change. | 
|  | */ | 
|  | void | 
|  | vxge_callback_link_up(struct __vxge_hw_device *hldev) | 
|  | { | 
|  | struct net_device *dev = hldev->ndev; | 
|  | struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | vdev->ndev->name, __func__, __LINE__); | 
|  | printk(KERN_NOTICE "%s: Link Up\n", vdev->ndev->name); | 
|  | vdev->stats.link_up++; | 
|  |  | 
|  | netif_carrier_on(vdev->ndev); | 
|  | vxge_wake_all_tx_queue(vdev); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_callback_link_down | 
|  | * | 
|  | * This function is called during interrupt context to notify link down state | 
|  | * change. | 
|  | */ | 
|  | void | 
|  | vxge_callback_link_down(struct __vxge_hw_device *hldev) | 
|  | { | 
|  | struct net_device *dev = hldev->ndev; | 
|  | struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | 
|  | printk(KERN_NOTICE "%s: Link Down\n", vdev->ndev->name); | 
|  |  | 
|  | vdev->stats.link_down++; | 
|  | netif_carrier_off(vdev->ndev); | 
|  | vxge_stop_all_tx_queue(vdev); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_rx_alloc | 
|  | * | 
|  | * Allocate SKB. | 
|  | */ | 
|  | static struct sk_buff* | 
|  | vxge_rx_alloc(void *dtrh, struct vxge_ring *ring, const int skb_size) | 
|  | { | 
|  | struct net_device    *dev; | 
|  | struct sk_buff       *skb; | 
|  | struct vxge_rx_priv *rx_priv; | 
|  |  | 
|  | dev = ring->ndev; | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | 
|  |  | 
|  | /* try to allocate skb first. this one may fail */ | 
|  | skb = netdev_alloc_skb(dev, skb_size + | 
|  | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | 
|  | if (skb == NULL) { | 
|  | vxge_debug_mem(VXGE_ERR, | 
|  | "%s: out of memory to allocate SKB", dev->name); | 
|  | ring->stats.skb_alloc_fail++; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | vxge_debug_mem(VXGE_TRACE, | 
|  | "%s: %s:%d  Skb : 0x%p", ring->ndev->name, | 
|  | __func__, __LINE__, skb); | 
|  |  | 
|  | skb_reserve(skb, VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | 
|  |  | 
|  | rx_priv->skb = skb; | 
|  | rx_priv->skb_data = NULL; | 
|  | rx_priv->data_size = skb_size; | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_rx_map | 
|  | */ | 
|  | static int vxge_rx_map(void *dtrh, struct vxge_ring *ring) | 
|  | { | 
|  | struct vxge_rx_priv *rx_priv; | 
|  | dma_addr_t dma_addr; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | 
|  |  | 
|  | rx_priv->skb_data = rx_priv->skb->data; | 
|  | dma_addr = pci_map_single(ring->pdev, rx_priv->skb_data, | 
|  | rx_priv->data_size, PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | if (dma_addr == 0) { | 
|  | ring->stats.pci_map_fail++; | 
|  | return -EIO; | 
|  | } | 
|  | vxge_debug_mem(VXGE_TRACE, | 
|  | "%s: %s:%d  1 buffer mode dma_addr = 0x%llx", | 
|  | ring->ndev->name, __func__, __LINE__, | 
|  | (unsigned long long)dma_addr); | 
|  | vxge_hw_ring_rxd_1b_set(dtrh, dma_addr, rx_priv->data_size); | 
|  |  | 
|  | rx_priv->data_dma = dma_addr; | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_rx_initial_replenish | 
|  | * Allocation of RxD as an initial replenish procedure. | 
|  | */ | 
|  | static enum vxge_hw_status | 
|  | vxge_rx_initial_replenish(void *dtrh, void *userdata) | 
|  | { | 
|  | struct vxge_ring *ring = (struct vxge_ring *)userdata; | 
|  | struct vxge_rx_priv *rx_priv; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  | if (vxge_rx_alloc(dtrh, ring, | 
|  | VXGE_LL_MAX_FRAME_SIZE(ring->ndev)) == NULL) | 
|  | return VXGE_HW_FAIL; | 
|  |  | 
|  | if (vxge_rx_map(dtrh, ring)) { | 
|  | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | 
|  | dev_kfree_skb(rx_priv->skb); | 
|  |  | 
|  | return VXGE_HW_FAIL; | 
|  | } | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | return VXGE_HW_OK; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | vxge_rx_complete(struct vxge_ring *ring, struct sk_buff *skb, u16 vlan, | 
|  | int pkt_length, struct vxge_hw_ring_rxd_info *ext_info) | 
|  | { | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  | skb_record_rx_queue(skb, ring->driver_id); | 
|  | skb->protocol = eth_type_trans(skb, ring->ndev); | 
|  |  | 
|  | ring->stats.rx_frms++; | 
|  | ring->stats.rx_bytes += pkt_length; | 
|  |  | 
|  | if (skb->pkt_type == PACKET_MULTICAST) | 
|  | ring->stats.rx_mcast++; | 
|  |  | 
|  | vxge_debug_rx(VXGE_TRACE, | 
|  | "%s: %s:%d  skb protocol = %d", | 
|  | ring->ndev->name, __func__, __LINE__, skb->protocol); | 
|  |  | 
|  | if (ring->gro_enable) { | 
|  | if (ring->vlgrp && ext_info->vlan && | 
|  | (ring->vlan_tag_strip == | 
|  | VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE)) | 
|  | vlan_gro_receive(ring->napi_p, ring->vlgrp, | 
|  | ext_info->vlan, skb); | 
|  | else | 
|  | napi_gro_receive(ring->napi_p, skb); | 
|  | } else { | 
|  | if (ring->vlgrp && vlan && | 
|  | (ring->vlan_tag_strip == | 
|  | VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE)) | 
|  | vlan_hwaccel_receive_skb(skb, ring->vlgrp, vlan); | 
|  | else | 
|  | netif_receive_skb(skb); | 
|  | } | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | static inline void vxge_re_pre_post(void *dtr, struct vxge_ring *ring, | 
|  | struct vxge_rx_priv *rx_priv) | 
|  | { | 
|  | pci_dma_sync_single_for_device(ring->pdev, | 
|  | rx_priv->data_dma, rx_priv->data_size, PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | vxge_hw_ring_rxd_1b_set(dtr, rx_priv->data_dma, rx_priv->data_size); | 
|  | vxge_hw_ring_rxd_pre_post(ring->handle, dtr); | 
|  | } | 
|  |  | 
|  | static inline void vxge_post(int *dtr_cnt, void **first_dtr, | 
|  | void *post_dtr, struct __vxge_hw_ring *ringh) | 
|  | { | 
|  | int dtr_count = *dtr_cnt; | 
|  | if ((*dtr_cnt % VXGE_HW_RXSYNC_FREQ_CNT) == 0) { | 
|  | if (*first_dtr) | 
|  | vxge_hw_ring_rxd_post_post_wmb(ringh, *first_dtr); | 
|  | *first_dtr = post_dtr; | 
|  | } else | 
|  | vxge_hw_ring_rxd_post_post(ringh, post_dtr); | 
|  | dtr_count++; | 
|  | *dtr_cnt = dtr_count; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_rx_1b_compl | 
|  | * | 
|  | * If the interrupt is because of a received frame or if the receive ring | 
|  | * contains fresh as yet un-processed frames, this function is called. | 
|  | */ | 
|  | enum vxge_hw_status | 
|  | vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr, | 
|  | u8 t_code, void *userdata) | 
|  | { | 
|  | struct vxge_ring *ring = (struct vxge_ring *)userdata; | 
|  | struct  net_device *dev = ring->ndev; | 
|  | unsigned int dma_sizes; | 
|  | void *first_dtr = NULL; | 
|  | int dtr_cnt = 0; | 
|  | int data_size; | 
|  | dma_addr_t data_dma; | 
|  | int pkt_length; | 
|  | struct sk_buff *skb; | 
|  | struct vxge_rx_priv *rx_priv; | 
|  | struct vxge_hw_ring_rxd_info ext_info; | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  | ring->pkts_processed = 0; | 
|  |  | 
|  | vxge_hw_ring_replenish(ringh, 0); | 
|  |  | 
|  | do { | 
|  | prefetch((char *)dtr + L1_CACHE_BYTES); | 
|  | rx_priv = vxge_hw_ring_rxd_private_get(dtr); | 
|  | skb = rx_priv->skb; | 
|  | data_size = rx_priv->data_size; | 
|  | data_dma = rx_priv->data_dma; | 
|  | prefetch(rx_priv->skb_data); | 
|  |  | 
|  | vxge_debug_rx(VXGE_TRACE, | 
|  | "%s: %s:%d  skb = 0x%p", | 
|  | ring->ndev->name, __func__, __LINE__, skb); | 
|  |  | 
|  | vxge_hw_ring_rxd_1b_get(ringh, dtr, &dma_sizes); | 
|  | pkt_length = dma_sizes; | 
|  |  | 
|  | pkt_length -= ETH_FCS_LEN; | 
|  |  | 
|  | vxge_debug_rx(VXGE_TRACE, | 
|  | "%s: %s:%d  Packet Length = %d", | 
|  | ring->ndev->name, __func__, __LINE__, pkt_length); | 
|  |  | 
|  | vxge_hw_ring_rxd_1b_info_get(ringh, dtr, &ext_info); | 
|  |  | 
|  | /* check skb validity */ | 
|  | vxge_assert(skb); | 
|  |  | 
|  | prefetch((char *)skb + L1_CACHE_BYTES); | 
|  | if (unlikely(t_code)) { | 
|  |  | 
|  | if (vxge_hw_ring_handle_tcode(ringh, dtr, t_code) != | 
|  | VXGE_HW_OK) { | 
|  |  | 
|  | ring->stats.rx_errors++; | 
|  | vxge_debug_rx(VXGE_TRACE, | 
|  | "%s: %s :%d Rx T_code is %d", | 
|  | ring->ndev->name, __func__, | 
|  | __LINE__, t_code); | 
|  |  | 
|  | /* If the t_code is not supported and if the | 
|  | * t_code is other than 0x5 (unparseable packet | 
|  | * such as unknown UPV6 header), Drop it !!! | 
|  | */ | 
|  | vxge_re_pre_post(dtr, ring, rx_priv); | 
|  |  | 
|  | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | 
|  | ring->stats.rx_dropped++; | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (pkt_length > VXGE_LL_RX_COPY_THRESHOLD) { | 
|  |  | 
|  | if (vxge_rx_alloc(dtr, ring, data_size) != NULL) { | 
|  |  | 
|  | if (!vxge_rx_map(dtr, ring)) { | 
|  | skb_put(skb, pkt_length); | 
|  |  | 
|  | pci_unmap_single(ring->pdev, data_dma, | 
|  | data_size, PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | vxge_hw_ring_rxd_pre_post(ringh, dtr); | 
|  | vxge_post(&dtr_cnt, &first_dtr, dtr, | 
|  | ringh); | 
|  | } else { | 
|  | dev_kfree_skb(rx_priv->skb); | 
|  | rx_priv->skb = skb; | 
|  | rx_priv->data_size = data_size; | 
|  | vxge_re_pre_post(dtr, ring, rx_priv); | 
|  |  | 
|  | vxge_post(&dtr_cnt, &first_dtr, dtr, | 
|  | ringh); | 
|  | ring->stats.rx_dropped++; | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | vxge_re_pre_post(dtr, ring, rx_priv); | 
|  |  | 
|  | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | 
|  | ring->stats.rx_dropped++; | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | struct sk_buff *skb_up; | 
|  |  | 
|  | skb_up = netdev_alloc_skb(dev, pkt_length + | 
|  | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | 
|  | if (skb_up != NULL) { | 
|  | skb_reserve(skb_up, | 
|  | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | 
|  |  | 
|  | pci_dma_sync_single_for_cpu(ring->pdev, | 
|  | data_dma, data_size, | 
|  | PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | vxge_debug_mem(VXGE_TRACE, | 
|  | "%s: %s:%d  skb_up = %p", | 
|  | ring->ndev->name, __func__, | 
|  | __LINE__, skb); | 
|  | memcpy(skb_up->data, skb->data, pkt_length); | 
|  |  | 
|  | vxge_re_pre_post(dtr, ring, rx_priv); | 
|  |  | 
|  | vxge_post(&dtr_cnt, &first_dtr, dtr, | 
|  | ringh); | 
|  | /* will netif_rx small SKB instead */ | 
|  | skb = skb_up; | 
|  | skb_put(skb, pkt_length); | 
|  | } else { | 
|  | vxge_re_pre_post(dtr, ring, rx_priv); | 
|  |  | 
|  | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | 
|  | vxge_debug_rx(VXGE_ERR, | 
|  | "%s: vxge_rx_1b_compl: out of " | 
|  | "memory", dev->name); | 
|  | ring->stats.skb_alloc_fail++; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((ext_info.proto & VXGE_HW_FRAME_PROTO_TCP_OR_UDP) && | 
|  | !(ext_info.proto & VXGE_HW_FRAME_PROTO_IP_FRAG) && | 
|  | ring->rx_csum && /* Offload Rx side CSUM */ | 
|  | ext_info.l3_cksum == VXGE_HW_L3_CKSUM_OK && | 
|  | ext_info.l4_cksum == VXGE_HW_L4_CKSUM_OK) | 
|  | skb->ip_summed = CHECKSUM_UNNECESSARY; | 
|  | else | 
|  | skb->ip_summed = CHECKSUM_NONE; | 
|  |  | 
|  | vxge_rx_complete(ring, skb, ext_info.vlan, | 
|  | pkt_length, &ext_info); | 
|  |  | 
|  | ring->budget--; | 
|  | ring->pkts_processed++; | 
|  | if (!ring->budget) | 
|  | break; | 
|  |  | 
|  | } while (vxge_hw_ring_rxd_next_completed(ringh, &dtr, | 
|  | &t_code) == VXGE_HW_OK); | 
|  |  | 
|  | if (first_dtr) | 
|  | vxge_hw_ring_rxd_post_post_wmb(ringh, first_dtr); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", | 
|  | __func__, __LINE__); | 
|  | return VXGE_HW_OK; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_xmit_compl | 
|  | * | 
|  | * If an interrupt was raised to indicate DMA complete of the Tx packet, | 
|  | * this function is called. It identifies the last TxD whose buffer was | 
|  | * freed and frees all skbs whose data have already DMA'ed into the NICs | 
|  | * internal memory. | 
|  | */ | 
|  | enum vxge_hw_status | 
|  | vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr, | 
|  | enum vxge_hw_fifo_tcode t_code, void *userdata, | 
|  | struct sk_buff ***skb_ptr, int nr_skb, int *more) | 
|  | { | 
|  | struct vxge_fifo *fifo = (struct vxge_fifo *)userdata; | 
|  | struct sk_buff *skb, **done_skb = *skb_ptr; | 
|  | int pkt_cnt = 0; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d Entered....", __func__, __LINE__); | 
|  |  | 
|  | do { | 
|  | int frg_cnt; | 
|  | skb_frag_t *frag; | 
|  | int i = 0, j; | 
|  | struct vxge_tx_priv *txd_priv = | 
|  | vxge_hw_fifo_txdl_private_get(dtr); | 
|  |  | 
|  | skb = txd_priv->skb; | 
|  | frg_cnt = skb_shinfo(skb)->nr_frags; | 
|  | frag = &skb_shinfo(skb)->frags[0]; | 
|  |  | 
|  | vxge_debug_tx(VXGE_TRACE, | 
|  | "%s: %s:%d fifo_hw = %p dtr = %p " | 
|  | "tcode = 0x%x", fifo->ndev->name, __func__, | 
|  | __LINE__, fifo_hw, dtr, t_code); | 
|  | /* check skb validity */ | 
|  | vxge_assert(skb); | 
|  | vxge_debug_tx(VXGE_TRACE, | 
|  | "%s: %s:%d skb = %p itxd_priv = %p frg_cnt = %d", | 
|  | fifo->ndev->name, __func__, __LINE__, | 
|  | skb, txd_priv, frg_cnt); | 
|  | if (unlikely(t_code)) { | 
|  | fifo->stats.tx_errors++; | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: tx: dtr %p completed due to " | 
|  | "error t_code %01x", fifo->ndev->name, | 
|  | dtr, t_code); | 
|  | vxge_hw_fifo_handle_tcode(fifo_hw, dtr, t_code); | 
|  | } | 
|  |  | 
|  | /*  for unfragmented skb */ | 
|  | pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++], | 
|  | skb_headlen(skb), PCI_DMA_TODEVICE); | 
|  |  | 
|  | for (j = 0; j < frg_cnt; j++) { | 
|  | pci_unmap_page(fifo->pdev, | 
|  | txd_priv->dma_buffers[i++], | 
|  | frag->size, PCI_DMA_TODEVICE); | 
|  | frag += 1; | 
|  | } | 
|  |  | 
|  | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | 
|  |  | 
|  | /* Updating the statistics block */ | 
|  | fifo->stats.tx_frms++; | 
|  | fifo->stats.tx_bytes += skb->len; | 
|  |  | 
|  | *done_skb++ = skb; | 
|  |  | 
|  | if (--nr_skb <= 0) { | 
|  | *more = 1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | pkt_cnt++; | 
|  | if (pkt_cnt > fifo->indicate_max_pkts) | 
|  | break; | 
|  |  | 
|  | } while (vxge_hw_fifo_txdl_next_completed(fifo_hw, | 
|  | &dtr, &t_code) == VXGE_HW_OK); | 
|  |  | 
|  | *skb_ptr = done_skb; | 
|  | vxge_wake_tx_queue(fifo, skb); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d  Exiting...", | 
|  | fifo->ndev->name, __func__, __LINE__); | 
|  | return VXGE_HW_OK; | 
|  | } | 
|  |  | 
|  | /* select a vpath to transmit the packet */ | 
|  | static u32 vxge_get_vpath_no(struct vxgedev *vdev, struct sk_buff *skb, | 
|  | int *do_lock) | 
|  | { | 
|  | u16 queue_len, counter = 0; | 
|  | if (skb->protocol == htons(ETH_P_IP)) { | 
|  | struct iphdr *ip; | 
|  | struct tcphdr *th; | 
|  |  | 
|  | ip = ip_hdr(skb); | 
|  |  | 
|  | if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) { | 
|  | th = (struct tcphdr *)(((unsigned char *)ip) + | 
|  | ip->ihl*4); | 
|  |  | 
|  | queue_len = vdev->no_of_vpath; | 
|  | counter = (ntohs(th->source) + | 
|  | ntohs(th->dest)) & | 
|  | vdev->vpath_selector[queue_len - 1]; | 
|  | if (counter >= queue_len) | 
|  | counter = queue_len - 1; | 
|  |  | 
|  | if (ip->protocol == IPPROTO_UDP) { | 
|  | #ifdef NETIF_F_LLTX | 
|  | *do_lock = 0; | 
|  | #endif | 
|  | } | 
|  | } | 
|  | } | 
|  | return counter; | 
|  | } | 
|  |  | 
|  | static enum vxge_hw_status vxge_search_mac_addr_in_list( | 
|  | struct vxge_vpath *vpath, u64 del_mac) | 
|  | { | 
|  | struct list_head *entry, *next; | 
|  | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | 
|  | if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) | 
|  | return TRUE; | 
|  | } | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header) | 
|  | { | 
|  | struct macInfo mac_info; | 
|  | u8 *mac_address = NULL; | 
|  | u64 mac_addr = 0, vpath_vector = 0; | 
|  | int vpath_idx = 0; | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxge_vpath *vpath = NULL; | 
|  | struct __vxge_hw_device *hldev; | 
|  |  | 
|  | hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | mac_address = (u8 *)&mac_addr; | 
|  | memcpy(mac_address, mac_header, ETH_ALEN); | 
|  |  | 
|  | /* Is this mac address already in the list? */ | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
|  | vpath = &vdev->vpaths[vpath_idx]; | 
|  | if (vxge_search_mac_addr_in_list(vpath, mac_addr)) | 
|  | return vpath_idx; | 
|  | } | 
|  |  | 
|  | memset(&mac_info, 0, sizeof(struct macInfo)); | 
|  | memcpy(mac_info.macaddr, mac_header, ETH_ALEN); | 
|  |  | 
|  | /* Any vpath has room to add mac address to its da table? */ | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
|  | vpath = &vdev->vpaths[vpath_idx]; | 
|  | if (vpath->mac_addr_cnt < vpath->max_mac_addr_cnt) { | 
|  | /* Add this mac address to this vpath */ | 
|  | mac_info.vpath_no = vpath_idx; | 
|  | mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | 
|  | status = vxge_add_mac_addr(vdev, &mac_info); | 
|  | if (status != VXGE_HW_OK) | 
|  | return -EPERM; | 
|  | return vpath_idx; | 
|  | } | 
|  | } | 
|  |  | 
|  | mac_info.state = VXGE_LL_MAC_ADDR_IN_LIST; | 
|  | vpath_idx = 0; | 
|  | mac_info.vpath_no = vpath_idx; | 
|  | /* Is the first vpath already selected as catch-basin ? */ | 
|  | vpath = &vdev->vpaths[vpath_idx]; | 
|  | if (vpath->mac_addr_cnt > vpath->max_mac_addr_cnt) { | 
|  | /* Add this mac address to this vpath */ | 
|  | if (FALSE == vxge_mac_list_add(vpath, &mac_info)) | 
|  | return -EPERM; | 
|  | return vpath_idx; | 
|  | } | 
|  |  | 
|  | /* Select first vpath as catch-basin */ | 
|  | vpath_vector = vxge_mBIT(vpath->device_id); | 
|  | status = vxge_hw_mgmt_reg_write(vpath->vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof( | 
|  | struct vxge_hw_mrpcim_reg, | 
|  | rts_mgr_cbasin_cfg), | 
|  | vpath_vector); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: Unable to set the vpath-%d in catch-basin mode", | 
|  | VXGE_DRIVER_NAME, vpath->device_id); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | if (FALSE == vxge_mac_list_add(vpath, &mac_info)) | 
|  | return -EPERM; | 
|  |  | 
|  | return vpath_idx; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_xmit | 
|  | * @skb : the socket buffer containing the Tx data. | 
|  | * @dev : device pointer. | 
|  | * | 
|  | * This function is the Tx entry point of the driver. Neterion NIC supports | 
|  | * certain protocol assist features on Tx side, namely  CSO, S/G, LSO. | 
|  | * NOTE: when device cant queue the pkt, just the trans_start variable will | 
|  | * not be upadted. | 
|  | */ | 
|  | static netdev_tx_t | 
|  | vxge_xmit(struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | struct vxge_fifo *fifo = NULL; | 
|  | void *dtr_priv; | 
|  | void *dtr = NULL; | 
|  | struct vxgedev *vdev = NULL; | 
|  | enum vxge_hw_status status; | 
|  | int frg_cnt, first_frg_len; | 
|  | skb_frag_t *frag; | 
|  | int i = 0, j = 0, avail; | 
|  | u64 dma_pointer; | 
|  | struct vxge_tx_priv *txdl_priv = NULL; | 
|  | struct __vxge_hw_fifo *fifo_hw; | 
|  | int offload_type; | 
|  | unsigned long flags = 0; | 
|  | int vpath_no = 0; | 
|  | int do_spin_tx_lock = 1; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | dev->name, __func__, __LINE__); | 
|  |  | 
|  | /* A buffer with no data will be dropped */ | 
|  | if (unlikely(skb->len <= 0)) { | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: Buffer has no data..", dev->name); | 
|  | dev_kfree_skb(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | vdev = (struct vxgedev *)netdev_priv(dev); | 
|  |  | 
|  | if (unlikely(!is_vxge_card_up(vdev))) { | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: vdev not initialized", dev->name); | 
|  | dev_kfree_skb(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | if (vdev->config.addr_learn_en) { | 
|  | vpath_no = vxge_learn_mac(vdev, skb->data + ETH_ALEN); | 
|  | if (vpath_no == -EPERM) { | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: Failed to store the mac address", | 
|  | dev->name); | 
|  | dev_kfree_skb(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) | 
|  | vpath_no = skb_get_queue_mapping(skb); | 
|  | else if (vdev->config.tx_steering_type == TX_PORT_STEERING) | 
|  | vpath_no = vxge_get_vpath_no(vdev, skb, &do_spin_tx_lock); | 
|  |  | 
|  | vxge_debug_tx(VXGE_TRACE, "%s: vpath_no= %d", dev->name, vpath_no); | 
|  |  | 
|  | if (vpath_no >= vdev->no_of_vpath) | 
|  | vpath_no = 0; | 
|  |  | 
|  | fifo = &vdev->vpaths[vpath_no].fifo; | 
|  | fifo_hw = fifo->handle; | 
|  |  | 
|  | if (do_spin_tx_lock) | 
|  | spin_lock_irqsave(&fifo->tx_lock, flags); | 
|  | else { | 
|  | if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags))) | 
|  | return NETDEV_TX_LOCKED; | 
|  | } | 
|  |  | 
|  | if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) { | 
|  | if (netif_subqueue_stopped(dev, skb)) { | 
|  | spin_unlock_irqrestore(&fifo->tx_lock, flags); | 
|  | return NETDEV_TX_BUSY; | 
|  | } | 
|  | } else if (unlikely(fifo->queue_state == VPATH_QUEUE_STOP)) { | 
|  | if (netif_queue_stopped(dev)) { | 
|  | spin_unlock_irqrestore(&fifo->tx_lock, flags); | 
|  | return NETDEV_TX_BUSY; | 
|  | } | 
|  | } | 
|  | avail = vxge_hw_fifo_free_txdl_count_get(fifo_hw); | 
|  | if (avail == 0) { | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: No free TXDs available", dev->name); | 
|  | fifo->stats.txd_not_free++; | 
|  | vxge_stop_tx_queue(fifo); | 
|  | goto _exit2; | 
|  | } | 
|  |  | 
|  | /* Last TXD?  Stop tx queue to avoid dropping packets.  TX | 
|  | * completion will resume the queue. | 
|  | */ | 
|  | if (avail == 1) | 
|  | vxge_stop_tx_queue(fifo); | 
|  |  | 
|  | status = vxge_hw_fifo_txdl_reserve(fifo_hw, &dtr, &dtr_priv); | 
|  | if (unlikely(status != VXGE_HW_OK)) { | 
|  | vxge_debug_tx(VXGE_ERR, | 
|  | "%s: Out of descriptors .", dev->name); | 
|  | fifo->stats.txd_out_of_desc++; | 
|  | vxge_stop_tx_queue(fifo); | 
|  | goto _exit2; | 
|  | } | 
|  |  | 
|  | vxge_debug_tx(VXGE_TRACE, | 
|  | "%s: %s:%d fifo_hw = %p dtr = %p dtr_priv = %p", | 
|  | dev->name, __func__, __LINE__, | 
|  | fifo_hw, dtr, dtr_priv); | 
|  |  | 
|  | if (vdev->vlgrp && vlan_tx_tag_present(skb)) { | 
|  | u16 vlan_tag = vlan_tx_tag_get(skb); | 
|  | vxge_hw_fifo_txdl_vlan_set(dtr, vlan_tag); | 
|  | } | 
|  |  | 
|  | first_frg_len = skb_headlen(skb); | 
|  |  | 
|  | dma_pointer = pci_map_single(fifo->pdev, skb->data, first_frg_len, | 
|  | PCI_DMA_TODEVICE); | 
|  |  | 
|  | if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) { | 
|  | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | 
|  | vxge_stop_tx_queue(fifo); | 
|  | fifo->stats.pci_map_fail++; | 
|  | goto _exit2; | 
|  | } | 
|  |  | 
|  | txdl_priv = vxge_hw_fifo_txdl_private_get(dtr); | 
|  | txdl_priv->skb = skb; | 
|  | txdl_priv->dma_buffers[j] = dma_pointer; | 
|  |  | 
|  | frg_cnt = skb_shinfo(skb)->nr_frags; | 
|  | vxge_debug_tx(VXGE_TRACE, | 
|  | "%s: %s:%d skb = %p txdl_priv = %p " | 
|  | "frag_cnt = %d dma_pointer = 0x%llx", dev->name, | 
|  | __func__, __LINE__, skb, txdl_priv, | 
|  | frg_cnt, (unsigned long long)dma_pointer); | 
|  |  | 
|  | vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer, | 
|  | first_frg_len); | 
|  |  | 
|  | frag = &skb_shinfo(skb)->frags[0]; | 
|  | for (i = 0; i < frg_cnt; i++) { | 
|  | /* ignore 0 length fragment */ | 
|  | if (!frag->size) | 
|  | continue; | 
|  |  | 
|  | dma_pointer = | 
|  | (u64)pci_map_page(fifo->pdev, frag->page, | 
|  | frag->page_offset, frag->size, | 
|  | PCI_DMA_TODEVICE); | 
|  |  | 
|  | if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) | 
|  | goto _exit0; | 
|  | vxge_debug_tx(VXGE_TRACE, | 
|  | "%s: %s:%d frag = %d dma_pointer = 0x%llx", | 
|  | dev->name, __func__, __LINE__, i, | 
|  | (unsigned long long)dma_pointer); | 
|  |  | 
|  | txdl_priv->dma_buffers[j] = dma_pointer; | 
|  | vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer, | 
|  | frag->size); | 
|  | frag += 1; | 
|  | } | 
|  |  | 
|  | offload_type = vxge_offload_type(skb); | 
|  |  | 
|  | if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { | 
|  |  | 
|  | int mss = vxge_tcp_mss(skb); | 
|  | if (mss) { | 
|  | vxge_debug_tx(VXGE_TRACE, | 
|  | "%s: %s:%d mss = %d", | 
|  | dev->name, __func__, __LINE__, mss); | 
|  | vxge_hw_fifo_txdl_mss_set(dtr, mss); | 
|  | } else { | 
|  | vxge_assert(skb->len <= | 
|  | dev->mtu + VXGE_HW_MAC_HEADER_MAX_SIZE); | 
|  | vxge_assert(0); | 
|  | goto _exit1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (skb->ip_summed == CHECKSUM_PARTIAL) | 
|  | vxge_hw_fifo_txdl_cksum_set_bits(dtr, | 
|  | VXGE_HW_FIFO_TXD_TX_CKO_IPV4_EN | | 
|  | VXGE_HW_FIFO_TXD_TX_CKO_TCP_EN | | 
|  | VXGE_HW_FIFO_TXD_TX_CKO_UDP_EN); | 
|  |  | 
|  | vxge_hw_fifo_txdl_post(fifo_hw, dtr); | 
|  | #ifdef NETIF_F_LLTX | 
|  | dev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */ | 
|  | #endif | 
|  | spin_unlock_irqrestore(&fifo->tx_lock, flags); | 
|  |  | 
|  | VXGE_COMPLETE_VPATH_TX(fifo); | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...", | 
|  | dev->name, __func__, __LINE__); | 
|  | return NETDEV_TX_OK; | 
|  |  | 
|  | _exit0: | 
|  | vxge_debug_tx(VXGE_TRACE, "%s: pci_map_page failed", dev->name); | 
|  |  | 
|  | _exit1: | 
|  | j = 0; | 
|  | frag = &skb_shinfo(skb)->frags[0]; | 
|  |  | 
|  | pci_unmap_single(fifo->pdev, txdl_priv->dma_buffers[j++], | 
|  | skb_headlen(skb), PCI_DMA_TODEVICE); | 
|  |  | 
|  | for (; j < i; j++) { | 
|  | pci_unmap_page(fifo->pdev, txdl_priv->dma_buffers[j], | 
|  | frag->size, PCI_DMA_TODEVICE); | 
|  | frag += 1; | 
|  | } | 
|  |  | 
|  | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | 
|  | _exit2: | 
|  | dev_kfree_skb(skb); | 
|  | spin_unlock_irqrestore(&fifo->tx_lock, flags); | 
|  | VXGE_COMPLETE_VPATH_TX(fifo); | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_rx_term | 
|  | * | 
|  | * Function will be called by hw function to abort all outstanding receive | 
|  | * descriptors. | 
|  | */ | 
|  | static void | 
|  | vxge_rx_term(void *dtrh, enum vxge_hw_rxd_state state, void *userdata) | 
|  | { | 
|  | struct vxge_ring *ring = (struct vxge_ring *)userdata; | 
|  | struct vxge_rx_priv *rx_priv = | 
|  | vxge_hw_ring_rxd_private_get(dtrh); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  | if (state != VXGE_HW_RXD_STATE_POSTED) | 
|  | return; | 
|  |  | 
|  | pci_unmap_single(ring->pdev, rx_priv->data_dma, | 
|  | rx_priv->data_size, PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | dev_kfree_skb(rx_priv->skb); | 
|  | rx_priv->skb_data = NULL; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d  Exiting...", | 
|  | ring->ndev->name, __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_tx_term | 
|  | * | 
|  | * Function will be called to abort all outstanding tx descriptors | 
|  | */ | 
|  | static void | 
|  | vxge_tx_term(void *dtrh, enum vxge_hw_txdl_state state, void *userdata) | 
|  | { | 
|  | struct vxge_fifo *fifo = (struct vxge_fifo *)userdata; | 
|  | skb_frag_t *frag; | 
|  | int i = 0, j, frg_cnt; | 
|  | struct vxge_tx_priv *txd_priv = vxge_hw_fifo_txdl_private_get(dtrh); | 
|  | struct sk_buff *skb = txd_priv->skb; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | if (state != VXGE_HW_TXDL_STATE_POSTED) | 
|  | return; | 
|  |  | 
|  | /* check skb validity */ | 
|  | vxge_assert(skb); | 
|  | frg_cnt = skb_shinfo(skb)->nr_frags; | 
|  | frag = &skb_shinfo(skb)->frags[0]; | 
|  |  | 
|  | /*  for unfragmented skb */ | 
|  | pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++], | 
|  | skb_headlen(skb), PCI_DMA_TODEVICE); | 
|  |  | 
|  | for (j = 0; j < frg_cnt; j++) { | 
|  | pci_unmap_page(fifo->pdev, txd_priv->dma_buffers[i++], | 
|  | frag->size, PCI_DMA_TODEVICE); | 
|  | frag += 1; | 
|  | } | 
|  |  | 
|  | dev_kfree_skb(skb); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_set_multicast | 
|  | * @dev: pointer to the device structure | 
|  | * | 
|  | * Entry point for multicast address enable/disable | 
|  | * This function is a driver entry point which gets called by the kernel | 
|  | * whenever multicast addresses must be enabled/disabled. This also gets | 
|  | * called to set/reset promiscuous mode. Depending on the deivce flag, we | 
|  | * determine, if multicast address must be enabled or if promiscuous mode | 
|  | * is to be disabled etc. | 
|  | */ | 
|  | static void vxge_set_multicast(struct net_device *dev) | 
|  | { | 
|  | struct dev_mc_list *mclist; | 
|  | struct vxgedev *vdev; | 
|  | int i, mcast_cnt = 0; | 
|  | struct __vxge_hw_device  *hldev; | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct macInfo mac_info; | 
|  | int vpath_idx = 0; | 
|  | struct vxge_mac_addrs *mac_entry; | 
|  | struct list_head *list_head; | 
|  | struct list_head *entry, *next; | 
|  | u8 *mac_address = NULL; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | vdev = (struct vxgedev *)netdev_priv(dev); | 
|  | hldev = (struct __vxge_hw_device  *)vdev->devh; | 
|  |  | 
|  | if (unlikely(!is_vxge_card_up(vdev))) | 
|  | return; | 
|  |  | 
|  | if ((dev->flags & IFF_ALLMULTI) && (!vdev->all_multi_flg)) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vxge_assert(vdev->vpaths[i].is_open); | 
|  | status = vxge_hw_vpath_mcast_enable( | 
|  | vdev->vpaths[i].handle); | 
|  | vdev->all_multi_flg = 1; | 
|  | } | 
|  | } else if ((dev->flags & IFF_ALLMULTI) && (vdev->all_multi_flg)) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vxge_assert(vdev->vpaths[i].is_open); | 
|  | status = vxge_hw_vpath_mcast_disable( | 
|  | vdev->vpaths[i].handle); | 
|  | vdev->all_multi_flg = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (status != VXGE_HW_OK) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "failed to %s multicast, status %d", | 
|  | dev->flags & IFF_ALLMULTI ? | 
|  | "enable" : "disable", status); | 
|  |  | 
|  | if (!vdev->config.addr_learn_en) { | 
|  | if (dev->flags & IFF_PROMISC) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vxge_assert(vdev->vpaths[i].is_open); | 
|  | status = vxge_hw_vpath_promisc_enable( | 
|  | vdev->vpaths[i].handle); | 
|  | } | 
|  | } else { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vxge_assert(vdev->vpaths[i].is_open); | 
|  | status = vxge_hw_vpath_promisc_disable( | 
|  | vdev->vpaths[i].handle); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | memset(&mac_info, 0, sizeof(struct macInfo)); | 
|  | /* Update individual M_CAST address list */ | 
|  | if ((!vdev->all_multi_flg) && dev->mc_count) { | 
|  |  | 
|  | mcast_cnt = vdev->vpaths[0].mcast_addr_cnt; | 
|  | list_head = &vdev->vpaths[0].mac_addr_list; | 
|  | if ((dev->mc_count + | 
|  | (vdev->vpaths[0].mac_addr_cnt - mcast_cnt)) > | 
|  | vdev->vpaths[0].max_mac_addr_cnt) | 
|  | goto _set_all_mcast; | 
|  |  | 
|  | /* Delete previous MC's */ | 
|  | for (i = 0; i < mcast_cnt; i++) { | 
|  | if (!list_empty(list_head)) | 
|  | mac_entry = (struct vxge_mac_addrs *) | 
|  | list_first_entry(list_head, | 
|  | struct vxge_mac_addrs, | 
|  | item); | 
|  |  | 
|  | list_for_each_safe(entry, next, list_head) { | 
|  |  | 
|  | mac_entry = (struct vxge_mac_addrs *) entry; | 
|  | /* Copy the mac address to delete */ | 
|  | mac_address = (u8 *)&mac_entry->macaddr; | 
|  | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | 
|  |  | 
|  | /* Is this a multicast address */ | 
|  | if (0x01 & mac_info.macaddr[0]) { | 
|  | for (vpath_idx = 0; vpath_idx < | 
|  | vdev->no_of_vpath; | 
|  | vpath_idx++) { | 
|  | mac_info.vpath_no = vpath_idx; | 
|  | status = vxge_del_mac_addr( | 
|  | vdev, | 
|  | &mac_info); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Add new ones */ | 
|  | for (i = 0, mclist = dev->mc_list; i < dev->mc_count; | 
|  | i++, mclist = mclist->next) { | 
|  |  | 
|  | memcpy(mac_info.macaddr, mclist->dmi_addr, ETH_ALEN); | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; | 
|  | vpath_idx++) { | 
|  | mac_info.vpath_no = vpath_idx; | 
|  | mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | 
|  | status = vxge_add_mac_addr(vdev, &mac_info); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s:%d Setting individual" | 
|  | "multicast address failed", | 
|  | __func__, __LINE__); | 
|  | goto _set_all_mcast; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return; | 
|  | _set_all_mcast: | 
|  | mcast_cnt = vdev->vpaths[0].mcast_addr_cnt; | 
|  | /* Delete previous MC's */ | 
|  | for (i = 0; i < mcast_cnt; i++) { | 
|  |  | 
|  | list_for_each_safe(entry, next, list_head) { | 
|  |  | 
|  | mac_entry = (struct vxge_mac_addrs *) entry; | 
|  | /* Copy the mac address to delete */ | 
|  | mac_address = (u8 *)&mac_entry->macaddr; | 
|  | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | 
|  |  | 
|  | /* Is this a multicast address */ | 
|  | if (0x01 & mac_info.macaddr[0]) | 
|  | break; | 
|  | } | 
|  |  | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; | 
|  | vpath_idx++) { | 
|  | mac_info.vpath_no = vpath_idx; | 
|  | status = vxge_del_mac_addr(vdev, &mac_info); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Enable all multicast */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vxge_assert(vdev->vpaths[i].is_open); | 
|  | status = vxge_hw_vpath_mcast_enable( | 
|  | vdev->vpaths[i].handle); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s:%d Enabling all multicasts failed", | 
|  | __func__, __LINE__); | 
|  | } | 
|  | vdev->all_multi_flg = 1; | 
|  | } | 
|  | dev->flags |= IFF_ALLMULTI; | 
|  | } | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_set_mac_addr | 
|  | * @dev: pointer to the device structure | 
|  | * | 
|  | * Update entry "0" (default MAC addr) | 
|  | */ | 
|  | static int vxge_set_mac_addr(struct net_device *dev, void *p) | 
|  | { | 
|  | struct sockaddr *addr = p; | 
|  | struct vxgedev *vdev; | 
|  | struct __vxge_hw_device  *hldev; | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct macInfo mac_info_new, mac_info_old; | 
|  | int vpath_idx = 0; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | vdev = (struct vxgedev *)netdev_priv(dev); | 
|  | hldev = vdev->devh; | 
|  |  | 
|  | if (!is_valid_ether_addr(addr->sa_data)) | 
|  | return -EINVAL; | 
|  |  | 
|  | memset(&mac_info_new, 0, sizeof(struct macInfo)); | 
|  | memset(&mac_info_old, 0, sizeof(struct macInfo)); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d  Exiting...", | 
|  | __func__, __LINE__); | 
|  |  | 
|  | /* Get the old address */ | 
|  | memcpy(mac_info_old.macaddr, dev->dev_addr, dev->addr_len); | 
|  |  | 
|  | /* Copy the new address */ | 
|  | memcpy(mac_info_new.macaddr, addr->sa_data, dev->addr_len); | 
|  |  | 
|  | /* First delete the old mac address from all the vpaths | 
|  | as we can't specify the index while adding new mac address */ | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
|  | struct vxge_vpath *vpath = &vdev->vpaths[vpath_idx]; | 
|  | if (!vpath->is_open) { | 
|  | /* This can happen when this interface is added/removed | 
|  | to the bonding interface. Delete this station address | 
|  | from the linked list */ | 
|  | vxge_mac_list_del(vpath, &mac_info_old); | 
|  |  | 
|  | /* Add this new address to the linked list | 
|  | for later restoring */ | 
|  | vxge_mac_list_add(vpath, &mac_info_new); | 
|  |  | 
|  | continue; | 
|  | } | 
|  | /* Delete the station address */ | 
|  | mac_info_old.vpath_no = vpath_idx; | 
|  | status = vxge_del_mac_addr(vdev, &mac_info_old); | 
|  | } | 
|  |  | 
|  | if (unlikely(!is_vxge_card_up(vdev))) { | 
|  | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | 
|  | return VXGE_HW_OK; | 
|  | } | 
|  |  | 
|  | /* Set this mac address to all the vpaths */ | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
|  | mac_info_new.vpath_no = vpath_idx; | 
|  | mac_info_new.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | 
|  | status = vxge_add_mac_addr(vdev, &mac_info_new); | 
|  | if (status != VXGE_HW_OK) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_vpath_intr_enable | 
|  | * @vdev: pointer to vdev | 
|  | * @vp_id: vpath for which to enable the interrupts | 
|  | * | 
|  | * Enables the interrupts for the vpath | 
|  | */ | 
|  | void vxge_vpath_intr_enable(struct vxgedev *vdev, int vp_id) | 
|  | { | 
|  | struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | 
|  | int msix_id, alarm_msix_id; | 
|  | int tim_msix_id[4] = {[0 ...3] = 0}; | 
|  |  | 
|  | vxge_hw_vpath_intr_enable(vpath->handle); | 
|  |  | 
|  | if (vdev->config.intr_type == INTA) | 
|  | vxge_hw_vpath_inta_unmask_tx_rx(vpath->handle); | 
|  | else { | 
|  | msix_id = vp_id * VXGE_HW_VPATH_MSIX_ACTIVE; | 
|  | alarm_msix_id = | 
|  | VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | 
|  |  | 
|  | tim_msix_id[0] = msix_id; | 
|  | tim_msix_id[1] = msix_id + 1; | 
|  | vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id, | 
|  | alarm_msix_id); | 
|  |  | 
|  | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id); | 
|  | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id + 1); | 
|  |  | 
|  | /* enable the alarm vector */ | 
|  | vxge_hw_vpath_msix_unmask(vpath->handle, alarm_msix_id); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_vpath_intr_disable | 
|  | * @vdev: pointer to vdev | 
|  | * @vp_id: vpath for which to disable the interrupts | 
|  | * | 
|  | * Disables the interrupts for the vpath | 
|  | */ | 
|  | void vxge_vpath_intr_disable(struct vxgedev *vdev, int vp_id) | 
|  | { | 
|  | struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | 
|  | int msix_id; | 
|  |  | 
|  | vxge_hw_vpath_intr_disable(vpath->handle); | 
|  |  | 
|  | if (vdev->config.intr_type == INTA) | 
|  | vxge_hw_vpath_inta_mask_tx_rx(vpath->handle); | 
|  | else { | 
|  | msix_id = vp_id * VXGE_HW_VPATH_MSIX_ACTIVE; | 
|  | vxge_hw_vpath_msix_mask(vpath->handle, msix_id); | 
|  | vxge_hw_vpath_msix_mask(vpath->handle, msix_id + 1); | 
|  |  | 
|  | /* disable the alarm vector */ | 
|  | msix_id = VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | 
|  | vxge_hw_vpath_msix_mask(vpath->handle, msix_id); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_reset_vpath | 
|  | * @vdev: pointer to vdev | 
|  | * @vp_id: vpath to reset | 
|  | * | 
|  | * Resets the vpath | 
|  | */ | 
|  | static int vxge_reset_vpath(struct vxgedev *vdev, int vp_id) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | int ret = 0; | 
|  |  | 
|  | /* check if device is down already */ | 
|  | if (unlikely(!is_vxge_card_up(vdev))) | 
|  | return 0; | 
|  |  | 
|  | /* is device reset already scheduled */ | 
|  | if (test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | 
|  | return 0; | 
|  |  | 
|  | if (vdev->vpaths[vp_id].handle) { | 
|  | if (vxge_hw_vpath_reset(vdev->vpaths[vp_id].handle) | 
|  | == VXGE_HW_OK) { | 
|  | if (is_vxge_card_up(vdev) && | 
|  | vxge_hw_vpath_recover_from_reset( | 
|  | vdev->vpaths[vp_id].handle) | 
|  | != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_recover_from_reset" | 
|  | "failed for vpath:%d", vp_id); | 
|  | return status; | 
|  | } | 
|  | } else { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_reset failed for" | 
|  | "vpath:%d", vp_id); | 
|  | return status; | 
|  | } | 
|  | } else | 
|  | return VXGE_HW_FAIL; | 
|  |  | 
|  | vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]); | 
|  | vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]); | 
|  |  | 
|  | /* Enable all broadcast */ | 
|  | vxge_hw_vpath_bcast_enable(vdev->vpaths[vp_id].handle); | 
|  |  | 
|  | /* Enable the interrupts */ | 
|  | vxge_vpath_intr_enable(vdev, vp_id); | 
|  |  | 
|  | smp_wmb(); | 
|  |  | 
|  | /* Enable the flow of traffic through the vpath */ | 
|  | vxge_hw_vpath_enable(vdev->vpaths[vp_id].handle); | 
|  |  | 
|  | smp_wmb(); | 
|  | vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[vp_id].handle); | 
|  | vdev->vpaths[vp_id].ring.last_status = VXGE_HW_OK; | 
|  |  | 
|  | /* Vpath reset done */ | 
|  | clear_bit(vp_id, &vdev->vp_reset); | 
|  |  | 
|  | /* Start the vpath queue */ | 
|  | vxge_wake_tx_queue(&vdev->vpaths[vp_id].fifo, NULL); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int do_vxge_reset(struct vxgedev *vdev, int event) | 
|  | { | 
|  | enum vxge_hw_status status; | 
|  | int ret = 0, vp_id, i; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) { | 
|  | /* check if device is down already */ | 
|  | if (unlikely(!is_vxge_card_up(vdev))) | 
|  | return 0; | 
|  |  | 
|  | /* is reset already scheduled */ | 
|  | if (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (event == VXGE_LL_FULL_RESET) { | 
|  | /* wait for all the vpath reset to complete */ | 
|  | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | 
|  | while (test_bit(vp_id, &vdev->vp_reset)) | 
|  | msleep(50); | 
|  | } | 
|  |  | 
|  | /* if execution mode is set to debug, don't reset the adapter */ | 
|  | if (unlikely(vdev->exec_mode)) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: execution mode is debug, returning..", | 
|  | vdev->ndev->name); | 
|  | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  | vxge_stop_all_tx_queue(vdev); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (event == VXGE_LL_FULL_RESET) { | 
|  | vxge_hw_device_intr_disable(vdev->devh); | 
|  |  | 
|  | switch (vdev->cric_err_event) { | 
|  | case VXGE_HW_EVENT_UNKNOWN: | 
|  | vxge_stop_all_tx_queue(vdev); | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "fatal: %s: Disabling device due to" | 
|  | "unknown error", | 
|  | vdev->ndev->name); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | case VXGE_HW_EVENT_RESET_START: | 
|  | break; | 
|  | case VXGE_HW_EVENT_RESET_COMPLETE: | 
|  | case VXGE_HW_EVENT_LINK_DOWN: | 
|  | case VXGE_HW_EVENT_LINK_UP: | 
|  | case VXGE_HW_EVENT_ALARM_CLEARED: | 
|  | case VXGE_HW_EVENT_ECCERR: | 
|  | case VXGE_HW_EVENT_MRPCIM_ECCERR: | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | case VXGE_HW_EVENT_FIFO_ERR: | 
|  | case VXGE_HW_EVENT_VPATH_ERR: | 
|  | break; | 
|  | case VXGE_HW_EVENT_CRITICAL_ERR: | 
|  | vxge_stop_all_tx_queue(vdev); | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "fatal: %s: Disabling device due to" | 
|  | "serious error", | 
|  | vdev->ndev->name); | 
|  | /* SOP or device reset required */ | 
|  | /* This event is not currently used */ | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | case VXGE_HW_EVENT_SERR: | 
|  | vxge_stop_all_tx_queue(vdev); | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "fatal: %s: Disabling device due to" | 
|  | "serious error", | 
|  | vdev->ndev->name); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | case VXGE_HW_EVENT_SRPCIM_SERR: | 
|  | case VXGE_HW_EVENT_MRPCIM_SERR: | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | case VXGE_HW_EVENT_SLOT_FREEZE: | 
|  | vxge_stop_all_tx_queue(vdev); | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "fatal: %s: Disabling device due to" | 
|  | "slot freeze", | 
|  | vdev->ndev->name); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | default: | 
|  | break; | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) | 
|  | vxge_stop_all_tx_queue(vdev); | 
|  |  | 
|  | if (event == VXGE_LL_FULL_RESET) { | 
|  | status = vxge_reset_all_vpaths(vdev); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "fatal: %s: can not reset vpaths", | 
|  | vdev->ndev->name); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (event == VXGE_LL_COMPL_RESET) { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | if (vdev->vpaths[i].handle) { | 
|  | if (vxge_hw_vpath_recover_from_reset( | 
|  | vdev->vpaths[i].handle) | 
|  | != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_recover_" | 
|  | "from_reset failed for vpath: " | 
|  | "%d", i); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | } | 
|  | } else { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_reset failed for " | 
|  | "vpath:%d", i); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) { | 
|  | /* Reprogram the DA table with populated mac addresses */ | 
|  | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | 
|  | vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]); | 
|  | vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]); | 
|  | } | 
|  |  | 
|  | /* enable vpath interrupts */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | vxge_vpath_intr_enable(vdev, i); | 
|  |  | 
|  | vxge_hw_device_intr_enable(vdev->devh); | 
|  |  | 
|  | smp_wmb(); | 
|  |  | 
|  | /* Indicate card up */ | 
|  | set_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  |  | 
|  | /* Get the traffic to flow through the vpaths */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vxge_hw_vpath_enable(vdev->vpaths[i].handle); | 
|  | smp_wmb(); | 
|  | vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle); | 
|  | } | 
|  |  | 
|  | vxge_wake_all_tx_queue(vdev); | 
|  | } | 
|  |  | 
|  | out: | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  |  | 
|  | /* Indicate reset done */ | 
|  | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) | 
|  | clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_reset | 
|  | * @vdev: pointer to ll device | 
|  | * | 
|  | * driver may reset the chip on events of serr, eccerr, etc | 
|  | */ | 
|  | int vxge_reset(struct vxgedev *vdev) | 
|  | { | 
|  | do_vxge_reset(vdev, VXGE_LL_FULL_RESET); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_poll - Receive handler when Receive Polling is used. | 
|  | * @dev: pointer to the device structure. | 
|  | * @budget: Number of packets budgeted to be processed in this iteration. | 
|  | * | 
|  | * This function comes into picture only if Receive side is being handled | 
|  | * through polling (called NAPI in linux). It mostly does what the normal | 
|  | * Rx interrupt handler does in terms of descriptor and packet processing | 
|  | * but not in an interrupt context. Also it will process a specified number | 
|  | * of packets at most in one iteration. This value is passed down by the | 
|  | * kernel as the function argument 'budget'. | 
|  | */ | 
|  | static int vxge_poll_msix(struct napi_struct *napi, int budget) | 
|  | { | 
|  | struct vxge_ring *ring = | 
|  | container_of(napi, struct vxge_ring, napi); | 
|  | int budget_org = budget; | 
|  | ring->budget = budget; | 
|  |  | 
|  | vxge_hw_vpath_poll_rx(ring->handle); | 
|  |  | 
|  | if (ring->pkts_processed < budget_org) { | 
|  | napi_complete(napi); | 
|  | /* Re enable the Rx interrupts for the vpath */ | 
|  | vxge_hw_channel_msix_unmask( | 
|  | (struct __vxge_hw_channel *)ring->handle, | 
|  | ring->rx_vector_no); | 
|  | } | 
|  |  | 
|  | return ring->pkts_processed; | 
|  | } | 
|  |  | 
|  | static int vxge_poll_inta(struct napi_struct *napi, int budget) | 
|  | { | 
|  | struct vxgedev *vdev = container_of(napi, struct vxgedev, napi); | 
|  | int pkts_processed = 0; | 
|  | int i; | 
|  | int budget_org = budget; | 
|  | struct vxge_ring *ring; | 
|  |  | 
|  | struct __vxge_hw_device  *hldev = (struct __vxge_hw_device *) | 
|  | pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | ring = &vdev->vpaths[i].ring; | 
|  | ring->budget = budget; | 
|  | vxge_hw_vpath_poll_rx(ring->handle); | 
|  | pkts_processed += ring->pkts_processed; | 
|  | budget -= ring->pkts_processed; | 
|  | if (budget <= 0) | 
|  | break; | 
|  | } | 
|  |  | 
|  | VXGE_COMPLETE_ALL_TX(vdev); | 
|  |  | 
|  | if (pkts_processed < budget_org) { | 
|  | napi_complete(napi); | 
|  | /* Re enable the Rx interrupts for the ring */ | 
|  | vxge_hw_device_unmask_all(hldev); | 
|  | vxge_hw_device_flush_io(hldev); | 
|  | } | 
|  |  | 
|  | return pkts_processed; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | /** | 
|  | * vxge_netpoll - netpoll event handler entry point | 
|  | * @dev : pointer to the device structure. | 
|  | * Description: | 
|  | *      This function will be called by upper layer to check for events on the | 
|  | * interface in situations where interrupts are disabled. It is used for | 
|  | * specific in-kernel networking tasks, such as remote consoles and kernel | 
|  | * debugging over the network (example netdump in RedHat). | 
|  | */ | 
|  | static void vxge_netpoll(struct net_device *dev) | 
|  | { | 
|  | struct __vxge_hw_device  *hldev; | 
|  | struct vxgedev *vdev; | 
|  |  | 
|  | vdev = (struct vxgedev *)netdev_priv(dev); | 
|  | hldev = (struct __vxge_hw_device  *)pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | if (pci_channel_offline(vdev->pdev)) | 
|  | return; | 
|  |  | 
|  | disable_irq(dev->irq); | 
|  | vxge_hw_device_clear_tx_rx(hldev); | 
|  |  | 
|  | vxge_hw_device_clear_tx_rx(hldev); | 
|  | VXGE_COMPLETE_ALL_RX(vdev); | 
|  | VXGE_COMPLETE_ALL_TX(vdev); | 
|  |  | 
|  | enable_irq(dev->irq); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | return; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* RTH configuration */ | 
|  | static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxge_hw_rth_hash_types hash_types; | 
|  | u8 itable[256] = {0}; /* indirection table */ | 
|  | u8 mtable[256] = {0}; /* CPU to vpath mapping  */ | 
|  | int index; | 
|  |  | 
|  | /* | 
|  | * Filling | 
|  | * 	- itable with bucket numbers | 
|  | * 	- mtable with bucket-to-vpath mapping | 
|  | */ | 
|  | for (index = 0; index < (1 << vdev->config.rth_bkt_sz); index++) { | 
|  | itable[index] = index; | 
|  | mtable[index] = index % vdev->no_of_vpath; | 
|  | } | 
|  |  | 
|  | /* Fill RTH hash types */ | 
|  | hash_types.hash_type_tcpipv4_en   = vdev->config.rth_hash_type_tcpipv4; | 
|  | hash_types.hash_type_ipv4_en      = vdev->config.rth_hash_type_ipv4; | 
|  | hash_types.hash_type_tcpipv6_en   = vdev->config.rth_hash_type_tcpipv6; | 
|  | hash_types.hash_type_ipv6_en      = vdev->config.rth_hash_type_ipv6; | 
|  | hash_types.hash_type_tcpipv6ex_en = | 
|  | vdev->config.rth_hash_type_tcpipv6ex; | 
|  | hash_types.hash_type_ipv6ex_en    = vdev->config.rth_hash_type_ipv6ex; | 
|  |  | 
|  | /* set indirection table, bucket-to-vpath mapping */ | 
|  | status = vxge_hw_vpath_rts_rth_itable_set(vdev->vp_handles, | 
|  | vdev->no_of_vpath, | 
|  | mtable, itable, | 
|  | vdev->config.rth_bkt_sz); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "RTH indirection table configuration failed " | 
|  | "for vpath:%d", vdev->vpaths[0].device_id); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Because the itable_set() method uses the active_table field | 
|  | * for the target virtual path the RTH config should be updated | 
|  | * for all VPATHs. The h/w only uses the lowest numbered VPATH | 
|  | * when steering frames. | 
|  | */ | 
|  | for (index = 0; index < vdev->no_of_vpath; index++) { | 
|  | status = vxge_hw_vpath_rts_rth_set( | 
|  | vdev->vpaths[index].handle, | 
|  | vdev->config.rth_algorithm, | 
|  | &hash_types, | 
|  | vdev->config.rth_bkt_sz); | 
|  |  | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "RTH configuration failed for vpath:%d", | 
|  | vdev->vpaths[index].device_id); | 
|  | return status; | 
|  | } | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | int vxge_mac_list_add(struct vxge_vpath *vpath, struct macInfo *mac) | 
|  | { | 
|  | struct vxge_mac_addrs *new_mac_entry; | 
|  | u8 *mac_address = NULL; | 
|  |  | 
|  | if (vpath->mac_addr_cnt >= VXGE_MAX_LEARN_MAC_ADDR_CNT) | 
|  | return TRUE; | 
|  |  | 
|  | new_mac_entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_ATOMIC); | 
|  | if (!new_mac_entry) { | 
|  | vxge_debug_mem(VXGE_ERR, | 
|  | "%s: memory allocation failed", | 
|  | VXGE_DRIVER_NAME); | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | list_add(&new_mac_entry->item, &vpath->mac_addr_list); | 
|  |  | 
|  | /* Copy the new mac address to the list */ | 
|  | mac_address = (u8 *)&new_mac_entry->macaddr; | 
|  | memcpy(mac_address, mac->macaddr, ETH_ALEN); | 
|  |  | 
|  | new_mac_entry->state = mac->state; | 
|  | vpath->mac_addr_cnt++; | 
|  |  | 
|  | /* Is this a multicast address */ | 
|  | if (0x01 & mac->macaddr[0]) | 
|  | vpath->mcast_addr_cnt++; | 
|  |  | 
|  | return TRUE; | 
|  | } | 
|  |  | 
|  | /* Add a mac address to DA table */ | 
|  | enum vxge_hw_status vxge_add_mac_addr(struct vxgedev *vdev, struct macInfo *mac) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxge_vpath *vpath; | 
|  | enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode; | 
|  |  | 
|  | if (0x01 & mac->macaddr[0]) /* multicast address */ | 
|  | duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE; | 
|  | else | 
|  | duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_REPLACE_DUPLICATE; | 
|  |  | 
|  | vpath = &vdev->vpaths[mac->vpath_no]; | 
|  | status = vxge_hw_vpath_mac_addr_add(vpath->handle, mac->macaddr, | 
|  | mac->macmask, duplicate_mode); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "DA config add entry failed for vpath:%d", | 
|  | vpath->device_id); | 
|  | } else | 
|  | if (FALSE == vxge_mac_list_add(vpath, mac)) | 
|  | status = -EPERM; | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | int vxge_mac_list_del(struct vxge_vpath *vpath, struct macInfo *mac) | 
|  | { | 
|  | struct list_head *entry, *next; | 
|  | u64 del_mac = 0; | 
|  | u8 *mac_address = (u8 *) (&del_mac); | 
|  |  | 
|  | /* Copy the mac address to delete from the list */ | 
|  | memcpy(mac_address, mac->macaddr, ETH_ALEN); | 
|  |  | 
|  | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | 
|  | if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) { | 
|  | list_del(entry); | 
|  | kfree((struct vxge_mac_addrs *)entry); | 
|  | vpath->mac_addr_cnt--; | 
|  |  | 
|  | /* Is this a multicast address */ | 
|  | if (0x01 & mac->macaddr[0]) | 
|  | vpath->mcast_addr_cnt--; | 
|  | return TRUE; | 
|  | } | 
|  | } | 
|  |  | 
|  | return FALSE; | 
|  | } | 
|  | /* delete a mac address from DA table */ | 
|  | enum vxge_hw_status vxge_del_mac_addr(struct vxgedev *vdev, struct macInfo *mac) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxge_vpath *vpath; | 
|  |  | 
|  | vpath = &vdev->vpaths[mac->vpath_no]; | 
|  | status = vxge_hw_vpath_mac_addr_delete(vpath->handle, mac->macaddr, | 
|  | mac->macmask); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "DA config delete entry failed for vpath:%d", | 
|  | vpath->device_id); | 
|  | } else | 
|  | vxge_mac_list_del(vpath, mac); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* list all mac addresses from DA table */ | 
|  | enum vxge_hw_status | 
|  | static vxge_search_mac_addr_in_da_table(struct vxge_vpath *vpath, | 
|  | struct macInfo *mac) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | unsigned char macmask[ETH_ALEN]; | 
|  | unsigned char macaddr[ETH_ALEN]; | 
|  |  | 
|  | status = vxge_hw_vpath_mac_addr_get(vpath->handle, | 
|  | macaddr, macmask); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "DA config list entry failed for vpath:%d", | 
|  | vpath->device_id); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | while (memcmp(mac->macaddr, macaddr, ETH_ALEN)) { | 
|  |  | 
|  | status = vxge_hw_vpath_mac_addr_get_next(vpath->handle, | 
|  | macaddr, macmask); | 
|  | if (status != VXGE_HW_OK) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* Store all vlan ids from the list to the vid table */ | 
|  | enum vxge_hw_status vxge_restore_vpath_vid_table(struct vxge_vpath *vpath) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxgedev *vdev = vpath->vdev; | 
|  | u16 vid; | 
|  |  | 
|  | if (vdev->vlgrp && vpath->is_open) { | 
|  |  | 
|  | for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { | 
|  | if (!vlan_group_get_device(vdev->vlgrp, vid)) | 
|  | continue; | 
|  | /* Add these vlan to the vid table */ | 
|  | status = vxge_hw_vpath_vid_add(vpath->handle, vid); | 
|  | } | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* Store all mac addresses from the list to the DA table */ | 
|  | enum vxge_hw_status vxge_restore_vpath_mac_addr(struct vxge_vpath *vpath) | 
|  | { | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct macInfo mac_info; | 
|  | u8 *mac_address = NULL; | 
|  | struct list_head *entry, *next; | 
|  |  | 
|  | memset(&mac_info, 0, sizeof(struct macInfo)); | 
|  |  | 
|  | if (vpath->is_open) { | 
|  |  | 
|  | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | 
|  | mac_address = | 
|  | (u8 *)& | 
|  | ((struct vxge_mac_addrs *)entry)->macaddr; | 
|  | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | 
|  | ((struct vxge_mac_addrs *)entry)->state = | 
|  | VXGE_LL_MAC_ADDR_IN_DA_TABLE; | 
|  | /* does this mac address already exist in da table? */ | 
|  | status = vxge_search_mac_addr_in_da_table(vpath, | 
|  | &mac_info); | 
|  | if (status != VXGE_HW_OK) { | 
|  | /* Add this mac address to the DA table */ | 
|  | status = vxge_hw_vpath_mac_addr_add( | 
|  | vpath->handle, mac_info.macaddr, | 
|  | mac_info.macmask, | 
|  | VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "DA add entry failed for vpath:%d", | 
|  | vpath->device_id); | 
|  | ((struct vxge_mac_addrs *)entry)->state | 
|  | = VXGE_LL_MAC_ADDR_IN_LIST; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* reset vpaths */ | 
|  | enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev) | 
|  | { | 
|  | int i; | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | if (vdev->vpaths[i].handle) { | 
|  | if (vxge_hw_vpath_reset(vdev->vpaths[i].handle) | 
|  | == VXGE_HW_OK) { | 
|  | if (is_vxge_card_up(vdev) && | 
|  | vxge_hw_vpath_recover_from_reset( | 
|  | vdev->vpaths[i].handle) | 
|  | != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_recover_" | 
|  | "from_reset failed for vpath: " | 
|  | "%d", i); | 
|  | return status; | 
|  | } | 
|  | } else { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_reset failed for " | 
|  | "vpath:%d", i); | 
|  | return status; | 
|  | } | 
|  | } | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* close vpaths */ | 
|  | void vxge_close_vpaths(struct vxgedev *vdev, int index) | 
|  | { | 
|  | int i; | 
|  | for (i = index; i < vdev->no_of_vpath; i++) { | 
|  | if (vdev->vpaths[i].handle && vdev->vpaths[i].is_open) { | 
|  | vxge_hw_vpath_close(vdev->vpaths[i].handle); | 
|  | vdev->stats.vpaths_open--; | 
|  | } | 
|  | vdev->vpaths[i].is_open = 0; | 
|  | vdev->vpaths[i].handle  = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* open vpaths */ | 
|  | int vxge_open_vpaths(struct vxgedev *vdev) | 
|  | { | 
|  | enum vxge_hw_status status; | 
|  | int i; | 
|  | u32 vp_id = 0; | 
|  | struct vxge_hw_vpath_attr attr; | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vxge_assert(vdev->vpaths[i].is_configured); | 
|  | attr.vp_id = vdev->vpaths[i].device_id; | 
|  | attr.fifo_attr.callback = vxge_xmit_compl; | 
|  | attr.fifo_attr.txdl_term = vxge_tx_term; | 
|  | attr.fifo_attr.per_txdl_space = sizeof(struct vxge_tx_priv); | 
|  | attr.fifo_attr.userdata = (void *)&vdev->vpaths[i].fifo; | 
|  |  | 
|  | attr.ring_attr.callback = vxge_rx_1b_compl; | 
|  | attr.ring_attr.rxd_init = vxge_rx_initial_replenish; | 
|  | attr.ring_attr.rxd_term = vxge_rx_term; | 
|  | attr.ring_attr.per_rxd_space = sizeof(struct vxge_rx_priv); | 
|  | attr.ring_attr.userdata = (void *)&vdev->vpaths[i].ring; | 
|  |  | 
|  | vdev->vpaths[i].ring.ndev = vdev->ndev; | 
|  | vdev->vpaths[i].ring.pdev = vdev->pdev; | 
|  | status = vxge_hw_vpath_open(vdev->devh, &attr, | 
|  | &(vdev->vpaths[i].handle)); | 
|  | if (status == VXGE_HW_OK) { | 
|  | vdev->vpaths[i].fifo.handle = | 
|  | (struct __vxge_hw_fifo *)attr.fifo_attr.userdata; | 
|  | vdev->vpaths[i].ring.handle = | 
|  | (struct __vxge_hw_ring *)attr.ring_attr.userdata; | 
|  | vdev->vpaths[i].fifo.tx_steering_type = | 
|  | vdev->config.tx_steering_type; | 
|  | vdev->vpaths[i].fifo.ndev = vdev->ndev; | 
|  | vdev->vpaths[i].fifo.pdev = vdev->pdev; | 
|  | vdev->vpaths[i].fifo.indicate_max_pkts = | 
|  | vdev->config.fifo_indicate_max_pkts; | 
|  | vdev->vpaths[i].ring.rx_vector_no = 0; | 
|  | vdev->vpaths[i].ring.rx_csum = vdev->rx_csum; | 
|  | vdev->vpaths[i].is_open = 1; | 
|  | vdev->vp_handles[i] = vdev->vpaths[i].handle; | 
|  | vdev->vpaths[i].ring.gro_enable = | 
|  | vdev->config.gro_enable; | 
|  | vdev->vpaths[i].ring.vlan_tag_strip = | 
|  | vdev->vlan_tag_strip; | 
|  | vdev->stats.vpaths_open++; | 
|  | } else { | 
|  | vdev->stats.vpath_open_fail++; | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: vpath: %d failed to open " | 
|  | "with status: %d", | 
|  | vdev->ndev->name, vdev->vpaths[i].device_id, | 
|  | status); | 
|  | vxge_close_vpaths(vdev, 0); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | vp_id = | 
|  | ((struct __vxge_hw_vpath_handle *)vdev->vpaths[i].handle)-> | 
|  | vpath->vp_id; | 
|  | vdev->vpaths_deployed |= vxge_mBIT(vp_id); | 
|  | } | 
|  | return VXGE_HW_OK; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  vxge_isr_napi | 
|  | *  @irq: the irq of the device. | 
|  | *  @dev_id: a void pointer to the hldev structure of the Titan device | 
|  | *  @ptregs: pointer to the registers pushed on the stack. | 
|  | * | 
|  | *  This function is the ISR handler of the device when napi is enabled. It | 
|  | *  identifies the reason for the interrupt and calls the relevant service | 
|  | *  routines. | 
|  | */ | 
|  | static irqreturn_t vxge_isr_napi(int irq, void *dev_id) | 
|  | { | 
|  | struct net_device *dev; | 
|  | struct __vxge_hw_device *hldev; | 
|  | u64 reason; | 
|  | enum vxge_hw_status status; | 
|  | struct vxgedev *vdev = (struct vxgedev *) dev_id;; | 
|  |  | 
|  | vxge_debug_intr(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | dev = vdev->ndev; | 
|  | hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | if (pci_channel_offline(vdev->pdev)) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | if (unlikely(!is_vxge_card_up(vdev))) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | status = vxge_hw_device_begin_irq(hldev, vdev->exec_mode, | 
|  | &reason); | 
|  | if (status == VXGE_HW_OK) { | 
|  | vxge_hw_device_mask_all(hldev); | 
|  |  | 
|  | if (reason & | 
|  | VXGE_HW_TITAN_GENERAL_INT_STATUS_VPATH_TRAFFIC_INT( | 
|  | vdev->vpaths_deployed >> | 
|  | (64 - VXGE_HW_MAX_VIRTUAL_PATHS))) { | 
|  |  | 
|  | vxge_hw_device_clear_tx_rx(hldev); | 
|  | napi_schedule(&vdev->napi); | 
|  | vxge_debug_intr(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | return IRQ_HANDLED; | 
|  | } else | 
|  | vxge_hw_device_unmask_all(hldev); | 
|  | } else if (unlikely((status == VXGE_HW_ERR_VPATH) || | 
|  | (status == VXGE_HW_ERR_CRITICAL) || | 
|  | (status == VXGE_HW_ERR_FIFO))) { | 
|  | vxge_hw_device_mask_all(hldev); | 
|  | vxge_hw_device_flush_io(hldev); | 
|  | return IRQ_HANDLED; | 
|  | } else if (unlikely(status == VXGE_HW_ERR_SLOT_FREEZE)) | 
|  | return IRQ_HANDLED; | 
|  |  | 
|  | vxge_debug_intr(VXGE_TRACE, "%s:%d  Exiting...", __func__, __LINE__); | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PCI_MSI | 
|  |  | 
|  | static irqreturn_t | 
|  | vxge_tx_msix_handle(int irq, void *dev_id) | 
|  | { | 
|  | struct vxge_fifo *fifo = (struct vxge_fifo *)dev_id; | 
|  |  | 
|  | VXGE_COMPLETE_VPATH_TX(fifo); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static irqreturn_t | 
|  | vxge_rx_msix_napi_handle(int irq, void *dev_id) | 
|  | { | 
|  | struct vxge_ring *ring = (struct vxge_ring *)dev_id; | 
|  |  | 
|  | /* MSIX_IDX for Rx is 1 */ | 
|  | vxge_hw_channel_msix_mask((struct __vxge_hw_channel *)ring->handle, | 
|  | ring->rx_vector_no); | 
|  |  | 
|  | napi_schedule(&ring->napi); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static irqreturn_t | 
|  | vxge_alarm_msix_handle(int irq, void *dev_id) | 
|  | { | 
|  | int i; | 
|  | enum vxge_hw_status status; | 
|  | struct vxge_vpath *vpath = (struct vxge_vpath *)dev_id; | 
|  | struct vxgedev *vdev = vpath->vdev; | 
|  | int alarm_msix_id = | 
|  | VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vxge_hw_vpath_msix_mask(vdev->vpaths[i].handle, | 
|  | alarm_msix_id); | 
|  |  | 
|  | status = vxge_hw_vpath_alarm_process(vdev->vpaths[i].handle, | 
|  | vdev->exec_mode); | 
|  | if (status == VXGE_HW_OK) { | 
|  |  | 
|  | vxge_hw_vpath_msix_unmask(vdev->vpaths[i].handle, | 
|  | alarm_msix_id); | 
|  | continue; | 
|  | } | 
|  | vxge_debug_intr(VXGE_ERR, | 
|  | "%s: vxge_hw_vpath_alarm_process failed %x ", | 
|  | VXGE_DRIVER_NAME, status); | 
|  | } | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int vxge_alloc_msix(struct vxgedev *vdev) | 
|  | { | 
|  | int j, i, ret = 0; | 
|  | int intr_cnt = 0; | 
|  | int alarm_msix_id = 0, msix_intr_vect = 0; | 
|  | vdev->intr_cnt = 0; | 
|  |  | 
|  | /* Tx/Rx MSIX Vectors count */ | 
|  | vdev->intr_cnt = vdev->no_of_vpath * 2; | 
|  |  | 
|  | /* Alarm MSIX Vectors count */ | 
|  | vdev->intr_cnt++; | 
|  |  | 
|  | intr_cnt = (vdev->max_vpath_supported * 2) + 1; | 
|  | vdev->entries = kzalloc(intr_cnt * sizeof(struct msix_entry), | 
|  | GFP_KERNEL); | 
|  | if (!vdev->entries) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: memory allocation failed", | 
|  | VXGE_DRIVER_NAME); | 
|  | return  -ENOMEM; | 
|  | } | 
|  |  | 
|  | vdev->vxge_entries = kzalloc(intr_cnt * sizeof(struct vxge_msix_entry), | 
|  | GFP_KERNEL); | 
|  | if (!vdev->vxge_entries) { | 
|  | vxge_debug_init(VXGE_ERR, "%s: memory allocation failed", | 
|  | VXGE_DRIVER_NAME); | 
|  | kfree(vdev->entries); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Last vector in the list is used for alarm */ | 
|  | alarm_msix_id = VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | 
|  | for (i = 0, j = 0; i < vdev->max_vpath_supported; i++) { | 
|  |  | 
|  | msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE; | 
|  |  | 
|  | /* Initialize the fifo vector */ | 
|  | vdev->entries[j].entry = msix_intr_vect; | 
|  | vdev->vxge_entries[j].entry = msix_intr_vect; | 
|  | vdev->vxge_entries[j].in_use = 0; | 
|  | j++; | 
|  |  | 
|  | /* Initialize the ring vector */ | 
|  | vdev->entries[j].entry = msix_intr_vect + 1; | 
|  | vdev->vxge_entries[j].entry = msix_intr_vect + 1; | 
|  | vdev->vxge_entries[j].in_use = 0; | 
|  | j++; | 
|  | } | 
|  |  | 
|  | /* Initialize the alarm vector */ | 
|  | vdev->entries[j].entry = alarm_msix_id; | 
|  | vdev->vxge_entries[j].entry = alarm_msix_id; | 
|  | vdev->vxge_entries[j].in_use = 0; | 
|  |  | 
|  | ret = pci_enable_msix(vdev->pdev, vdev->entries, intr_cnt); | 
|  | /* if driver request exceeeds available irq's, request with a small | 
|  | * number. | 
|  | */ | 
|  | if (ret > 0) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: MSI-X enable failed for %d vectors, available: %d", | 
|  | VXGE_DRIVER_NAME, intr_cnt, ret); | 
|  | vdev->max_vpath_supported = vdev->no_of_vpath; | 
|  | intr_cnt = (vdev->max_vpath_supported * 2) + 1; | 
|  |  | 
|  | /* Reset the alarm vector setting */ | 
|  | vdev->entries[j].entry = 0; | 
|  | vdev->vxge_entries[j].entry = 0; | 
|  |  | 
|  | /* Initialize the alarm vector with new setting */ | 
|  | vdev->entries[intr_cnt - 1].entry = alarm_msix_id; | 
|  | vdev->vxge_entries[intr_cnt - 1].entry = alarm_msix_id; | 
|  | vdev->vxge_entries[intr_cnt - 1].in_use = 0; | 
|  |  | 
|  | ret = pci_enable_msix(vdev->pdev, vdev->entries, intr_cnt); | 
|  | if (!ret) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: MSI-X enabled for %d vectors", | 
|  | VXGE_DRIVER_NAME, intr_cnt); | 
|  | } | 
|  |  | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: MSI-X enable failed for %d vectors, ret: %d", | 
|  | VXGE_DRIVER_NAME, intr_cnt, ret); | 
|  | kfree(vdev->entries); | 
|  | kfree(vdev->vxge_entries); | 
|  | vdev->entries = NULL; | 
|  | vdev->vxge_entries = NULL; | 
|  | return -ENODEV; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vxge_enable_msix(struct vxgedev *vdev) | 
|  | { | 
|  |  | 
|  | int i, ret = 0; | 
|  | enum vxge_hw_status status; | 
|  | /* 0 - Tx, 1 - Rx  */ | 
|  | int tim_msix_id[4]; | 
|  | int alarm_msix_id = 0, msix_intr_vect = 0;; | 
|  | vdev->intr_cnt = 0; | 
|  |  | 
|  | /* allocate msix vectors */ | 
|  | ret = vxge_alloc_msix(vdev); | 
|  | if (!ret) { | 
|  | /* Last vector in the list is used for alarm */ | 
|  | alarm_msix_id = | 
|  | VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  |  | 
|  | /* If fifo or ring are not enabled | 
|  | the MSIX vector for that should be set to 0 | 
|  | Hence initializeing this array to all 0s. | 
|  | */ | 
|  | memset(tim_msix_id, 0, sizeof(tim_msix_id)); | 
|  | msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE; | 
|  | tim_msix_id[0] = msix_intr_vect; | 
|  |  | 
|  | tim_msix_id[1] = msix_intr_vect + 1; | 
|  | vdev->vpaths[i].ring.rx_vector_no = tim_msix_id[1]; | 
|  |  | 
|  | status = vxge_hw_vpath_msix_set( | 
|  | vdev->vpaths[i].handle, | 
|  | tim_msix_id, alarm_msix_id); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "vxge_hw_vpath_msix_set " | 
|  | "failed with status : %x", status); | 
|  | kfree(vdev->entries); | 
|  | kfree(vdev->vxge_entries); | 
|  | pci_disable_msix(vdev->pdev); | 
|  | return -ENODEV; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void vxge_rem_msix_isr(struct vxgedev *vdev) | 
|  | { | 
|  | int intr_cnt; | 
|  |  | 
|  | for (intr_cnt = 0; intr_cnt < (vdev->max_vpath_supported * 2 + 1); | 
|  | intr_cnt++) { | 
|  | if (vdev->vxge_entries[intr_cnt].in_use) { | 
|  | synchronize_irq(vdev->entries[intr_cnt].vector); | 
|  | free_irq(vdev->entries[intr_cnt].vector, | 
|  | vdev->vxge_entries[intr_cnt].arg); | 
|  | vdev->vxge_entries[intr_cnt].in_use = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | kfree(vdev->entries); | 
|  | kfree(vdev->vxge_entries); | 
|  | vdev->entries = NULL; | 
|  | vdev->vxge_entries = NULL; | 
|  |  | 
|  | if (vdev->config.intr_type == MSI_X) | 
|  | pci_disable_msix(vdev->pdev); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void vxge_rem_isr(struct vxgedev *vdev) | 
|  | { | 
|  | struct __vxge_hw_device  *hldev; | 
|  | hldev = (struct __vxge_hw_device  *) pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | #ifdef CONFIG_PCI_MSI | 
|  | if (vdev->config.intr_type == MSI_X) { | 
|  | vxge_rem_msix_isr(vdev); | 
|  | } else | 
|  | #endif | 
|  | if (vdev->config.intr_type == INTA) { | 
|  | synchronize_irq(vdev->pdev->irq); | 
|  | free_irq(vdev->pdev->irq, vdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int vxge_add_isr(struct vxgedev *vdev) | 
|  | { | 
|  | int ret = 0; | 
|  | #ifdef CONFIG_PCI_MSI | 
|  | int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0; | 
|  | u64 function_mode = vdev->config.device_hw_info.function_mode; | 
|  | int pci_fun = PCI_FUNC(vdev->pdev->devfn); | 
|  |  | 
|  | if (vdev->config.intr_type == MSI_X) | 
|  | ret = vxge_enable_msix(vdev); | 
|  |  | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Enabling MSI-X Failed", VXGE_DRIVER_NAME); | 
|  | if ((function_mode == VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) && | 
|  | test_and_set_bit(__VXGE_STATE_CARD_UP, | 
|  | &driver_config->inta_dev_open)) | 
|  | return VXGE_HW_FAIL; | 
|  | else { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Defaulting to INTA", VXGE_DRIVER_NAME); | 
|  | vdev->config.intr_type = INTA; | 
|  | vxge_hw_device_set_intr_type(vdev->devh, | 
|  | VXGE_HW_INTR_MODE_IRQLINE); | 
|  | vxge_close_vpaths(vdev, 1); | 
|  | vdev->no_of_vpath = 1; | 
|  | vdev->stats.vpaths_open = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (vdev->config.intr_type == MSI_X) { | 
|  | for (intr_idx = 0; | 
|  | intr_idx < (vdev->no_of_vpath * | 
|  | VXGE_HW_VPATH_MSIX_ACTIVE); intr_idx++) { | 
|  |  | 
|  | msix_idx = intr_idx % VXGE_HW_VPATH_MSIX_ACTIVE; | 
|  | irq_req = 0; | 
|  |  | 
|  | switch (msix_idx) { | 
|  | case 0: | 
|  | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | 
|  | "%s:vxge fn: %d vpath: %d Tx MSI-X: %d", | 
|  | vdev->ndev->name, pci_fun, vp_idx, | 
|  | vdev->entries[intr_cnt].entry); | 
|  | ret = request_irq( | 
|  | vdev->entries[intr_cnt].vector, | 
|  | vxge_tx_msix_handle, 0, | 
|  | vdev->desc[intr_cnt], | 
|  | &vdev->vpaths[vp_idx].fifo); | 
|  | vdev->vxge_entries[intr_cnt].arg = | 
|  | &vdev->vpaths[vp_idx].fifo; | 
|  | irq_req = 1; | 
|  | break; | 
|  | case 1: | 
|  | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | 
|  | "%s:vxge fn: %d vpath: %d Rx MSI-X: %d", | 
|  | vdev->ndev->name, pci_fun, vp_idx, | 
|  | vdev->entries[intr_cnt].entry); | 
|  | ret = request_irq( | 
|  | vdev->entries[intr_cnt].vector, | 
|  | vxge_rx_msix_napi_handle, | 
|  | 0, | 
|  | vdev->desc[intr_cnt], | 
|  | &vdev->vpaths[vp_idx].ring); | 
|  | vdev->vxge_entries[intr_cnt].arg = | 
|  | &vdev->vpaths[vp_idx].ring; | 
|  | irq_req = 1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: MSIX - %d  Registration failed", | 
|  | vdev->ndev->name, intr_cnt); | 
|  | vxge_rem_msix_isr(vdev); | 
|  | if ((function_mode == | 
|  | VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) && | 
|  | test_and_set_bit(__VXGE_STATE_CARD_UP, | 
|  | &driver_config->inta_dev_open)) | 
|  | return VXGE_HW_FAIL; | 
|  | else { | 
|  | vxge_hw_device_set_intr_type( | 
|  | vdev->devh, | 
|  | VXGE_HW_INTR_MODE_IRQLINE); | 
|  | vdev->config.intr_type = INTA; | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Defaulting to INTA" | 
|  | , vdev->ndev->name); | 
|  | vxge_close_vpaths(vdev, 1); | 
|  | vdev->no_of_vpath = 1; | 
|  | vdev->stats.vpaths_open = 1; | 
|  | goto INTA_MODE; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (irq_req) { | 
|  | /* We requested for this msix interrupt */ | 
|  | vdev->vxge_entries[intr_cnt].in_use = 1; | 
|  | vxge_hw_vpath_msix_unmask( | 
|  | vdev->vpaths[vp_idx].handle, | 
|  | intr_idx); | 
|  | intr_cnt++; | 
|  | } | 
|  |  | 
|  | /* Point to next vpath handler */ | 
|  | if (((intr_idx + 1) % VXGE_HW_VPATH_MSIX_ACTIVE == 0) | 
|  | && (vp_idx < (vdev->no_of_vpath - 1))) | 
|  | vp_idx++; | 
|  | } | 
|  |  | 
|  | intr_cnt = vdev->max_vpath_supported * 2; | 
|  | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | 
|  | "%s:vxge Alarm fn: %d MSI-X: %d", | 
|  | vdev->ndev->name, pci_fun, | 
|  | vdev->entries[intr_cnt].entry); | 
|  | /* For Alarm interrupts */ | 
|  | ret = request_irq(vdev->entries[intr_cnt].vector, | 
|  | vxge_alarm_msix_handle, 0, | 
|  | vdev->desc[intr_cnt], | 
|  | &vdev->vpaths[vp_idx]); | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: MSIX - %d Registration failed", | 
|  | vdev->ndev->name, intr_cnt); | 
|  | vxge_rem_msix_isr(vdev); | 
|  | if ((function_mode == | 
|  | VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) && | 
|  | test_and_set_bit(__VXGE_STATE_CARD_UP, | 
|  | &driver_config->inta_dev_open)) | 
|  | return VXGE_HW_FAIL; | 
|  | else { | 
|  | vxge_hw_device_set_intr_type(vdev->devh, | 
|  | VXGE_HW_INTR_MODE_IRQLINE); | 
|  | vdev->config.intr_type = INTA; | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Defaulting to INTA", | 
|  | vdev->ndev->name); | 
|  | vxge_close_vpaths(vdev, 1); | 
|  | vdev->no_of_vpath = 1; | 
|  | vdev->stats.vpaths_open = 1; | 
|  | goto INTA_MODE; | 
|  | } | 
|  | } | 
|  |  | 
|  | vxge_hw_vpath_msix_unmask(vdev->vpaths[vp_idx].handle, | 
|  | intr_idx - 2); | 
|  | vdev->vxge_entries[intr_cnt].in_use = 1; | 
|  | vdev->vxge_entries[intr_cnt].arg = &vdev->vpaths[vp_idx]; | 
|  | } | 
|  | INTA_MODE: | 
|  | #endif | 
|  | snprintf(vdev->desc[0], VXGE_INTR_STRLEN, "%s:vxge", vdev->ndev->name); | 
|  |  | 
|  | if (vdev->config.intr_type == INTA) { | 
|  | ret = request_irq((int) vdev->pdev->irq, | 
|  | vxge_isr_napi, | 
|  | IRQF_SHARED, vdev->desc[0], vdev); | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s %s-%d: ISR registration failed", | 
|  | VXGE_DRIVER_NAME, "IRQ", vdev->pdev->irq); | 
|  | return -ENODEV; | 
|  | } | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "new %s-%d line allocated", | 
|  | "IRQ", vdev->pdev->irq); | 
|  | } | 
|  |  | 
|  | return VXGE_HW_OK; | 
|  | } | 
|  |  | 
|  | static void vxge_poll_vp_reset(unsigned long data) | 
|  | { | 
|  | struct vxgedev *vdev = (struct vxgedev *)data; | 
|  | int i, j = 0; | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | if (test_bit(i, &vdev->vp_reset)) { | 
|  | vxge_reset_vpath(vdev, i); | 
|  | j++; | 
|  | } | 
|  | } | 
|  | if (j && (vdev->config.intr_type != MSI_X)) { | 
|  | vxge_hw_device_unmask_all(vdev->devh); | 
|  | vxge_hw_device_flush_io(vdev->devh); | 
|  | } | 
|  |  | 
|  | mod_timer(&vdev->vp_reset_timer, jiffies + HZ / 2); | 
|  | } | 
|  |  | 
|  | static void vxge_poll_vp_lockup(unsigned long data) | 
|  | { | 
|  | struct vxgedev *vdev = (struct vxgedev *)data; | 
|  | int i; | 
|  | struct vxge_ring *ring; | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | ring = &vdev->vpaths[i].ring; | 
|  | /* Did this vpath received any packets */ | 
|  | if (ring->stats.prev_rx_frms == ring->stats.rx_frms) { | 
|  | status = vxge_hw_vpath_check_leak(ring->handle); | 
|  |  | 
|  | /* Did it received any packets last time */ | 
|  | if ((VXGE_HW_FAIL == status) && | 
|  | (VXGE_HW_FAIL == ring->last_status)) { | 
|  |  | 
|  | /* schedule vpath reset */ | 
|  | if (!test_and_set_bit(i, &vdev->vp_reset)) { | 
|  |  | 
|  | /* disable interrupts for this vpath */ | 
|  | vxge_vpath_intr_disable(vdev, i); | 
|  |  | 
|  | /* stop the queue for this vpath */ | 
|  | vxge_stop_tx_queue(&vdev->vpaths[i]. | 
|  | fifo); | 
|  | continue; | 
|  | } | 
|  | } | 
|  | } | 
|  | ring->stats.prev_rx_frms = ring->stats.rx_frms; | 
|  | ring->last_status = status; | 
|  | } | 
|  |  | 
|  | /* Check every 1 milli second */ | 
|  | mod_timer(&vdev->vp_lockup_timer, jiffies + HZ / 1000); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_open | 
|  | * @dev: pointer to the device structure. | 
|  | * | 
|  | * This function is the open entry point of the driver. It mainly calls a | 
|  | * function to allocate Rx buffers and inserts them into the buffer | 
|  | * descriptors and then enables the Rx part of the NIC. | 
|  | * Return value: '0' on success and an appropriate (-)ve integer as | 
|  | * defined in errno.h file on failure. | 
|  | */ | 
|  | int | 
|  | vxge_open(struct net_device *dev) | 
|  | { | 
|  | enum vxge_hw_status status; | 
|  | struct vxgedev *vdev; | 
|  | struct __vxge_hw_device *hldev; | 
|  | int ret = 0; | 
|  | int i; | 
|  | u64 val64, function_mode; | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d", dev->name, __func__, __LINE__); | 
|  |  | 
|  | vdev = (struct vxgedev *)netdev_priv(dev); | 
|  | hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | 
|  | function_mode = vdev->config.device_hw_info.function_mode; | 
|  |  | 
|  | /* make sure you have link off by default every time Nic is | 
|  | * initialized */ | 
|  | netif_carrier_off(dev); | 
|  |  | 
|  | /* Check for another device already opn with INTA */ | 
|  | if ((function_mode == VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) && | 
|  | test_bit(__VXGE_STATE_CARD_UP, &driver_config->inta_dev_open)) { | 
|  | ret = -EPERM; | 
|  | goto out0; | 
|  | } | 
|  |  | 
|  | /* Open VPATHs */ | 
|  | status = vxge_open_vpaths(vdev); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: fatal: Vpath open failed", vdev->ndev->name); | 
|  | ret = -EPERM; | 
|  | goto out0; | 
|  | } | 
|  |  | 
|  | vdev->mtu = dev->mtu; | 
|  |  | 
|  | status = vxge_add_isr(vdev); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: fatal: ISR add failed", dev->name); | 
|  | ret = -EPERM; | 
|  | goto out1; | 
|  | } | 
|  |  | 
|  |  | 
|  | if (vdev->config.intr_type != MSI_X) { | 
|  | netif_napi_add(dev, &vdev->napi, vxge_poll_inta, | 
|  | vdev->config.napi_weight); | 
|  | napi_enable(&vdev->napi); | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | vdev->vpaths[i].ring.napi_p = &vdev->napi; | 
|  | } else { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | netif_napi_add(dev, &vdev->vpaths[i].ring.napi, | 
|  | vxge_poll_msix, vdev->config.napi_weight); | 
|  | napi_enable(&vdev->vpaths[i].ring.napi); | 
|  | vdev->vpaths[i].ring.napi_p = | 
|  | &vdev->vpaths[i].ring.napi; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* configure RTH */ | 
|  | if (vdev->config.rth_steering) { | 
|  | status = vxge_rth_configure(vdev); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: fatal: RTH configuration failed", | 
|  | dev->name); | 
|  | ret = -EPERM; | 
|  | goto out2; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | /* set initial mtu before enabling the device */ | 
|  | status = vxge_hw_vpath_mtu_set(vdev->vpaths[i].handle, | 
|  | vdev->mtu); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: fatal: can not set new MTU", dev->name); | 
|  | ret = -EPERM; | 
|  | goto out2; | 
|  | } | 
|  | } | 
|  |  | 
|  | VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_TRACE, VXGE_COMPONENT_LL, vdev); | 
|  | vxge_debug_init(vdev->level_trace, | 
|  | "%s: MTU is %d", vdev->ndev->name, vdev->mtu); | 
|  | VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_ERR, VXGE_COMPONENT_LL, vdev); | 
|  |  | 
|  | /* Reprogram the DA table with populated mac addresses */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vxge_restore_vpath_mac_addr(&vdev->vpaths[i]); | 
|  | vxge_restore_vpath_vid_table(&vdev->vpaths[i]); | 
|  | } | 
|  |  | 
|  | /* Enable vpath to sniff all unicast/multicast traffic that not | 
|  | * addressed to them. We allow promiscous mode for PF only | 
|  | */ | 
|  |  | 
|  | val64 = 0; | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | 
|  | val64 |= VXGE_HW_RXMAC_AUTHORIZE_ALL_ADDR_VP(i); | 
|  |  | 
|  | vxge_hw_mgmt_reg_write(vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | 
|  | rxmac_authorize_all_addr), | 
|  | val64); | 
|  |  | 
|  | vxge_hw_mgmt_reg_write(vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | 
|  | rxmac_authorize_all_vid), | 
|  | val64); | 
|  |  | 
|  | vxge_set_multicast(dev); | 
|  |  | 
|  | /* Enabling Bcast and mcast for all vpath */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | status = vxge_hw_vpath_bcast_enable(vdev->vpaths[i].handle); | 
|  | if (status != VXGE_HW_OK) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s : Can not enable bcast for vpath " | 
|  | "id %d", dev->name, i); | 
|  | if (vdev->config.addr_learn_en) { | 
|  | status = | 
|  | vxge_hw_vpath_mcast_enable(vdev->vpaths[i].handle); | 
|  | if (status != VXGE_HW_OK) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s : Can not enable mcast for vpath " | 
|  | "id %d", dev->name, i); | 
|  | } | 
|  | } | 
|  |  | 
|  | vxge_hw_device_setpause_data(vdev->devh, 0, | 
|  | vdev->config.tx_pause_enable, | 
|  | vdev->config.rx_pause_enable); | 
|  |  | 
|  | if (vdev->vp_reset_timer.function == NULL) | 
|  | vxge_os_timer(vdev->vp_reset_timer, | 
|  | vxge_poll_vp_reset, vdev, (HZ/2)); | 
|  |  | 
|  | if (vdev->vp_lockup_timer.function == NULL) | 
|  | vxge_os_timer(vdev->vp_lockup_timer, | 
|  | vxge_poll_vp_lockup, vdev, (HZ/2)); | 
|  |  | 
|  | set_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  |  | 
|  | smp_wmb(); | 
|  |  | 
|  | if (vxge_hw_device_link_state_get(vdev->devh) == VXGE_HW_LINK_UP) { | 
|  | netif_carrier_on(vdev->ndev); | 
|  | printk(KERN_NOTICE "%s: Link Up\n", vdev->ndev->name); | 
|  | vdev->stats.link_up++; | 
|  | } | 
|  |  | 
|  | vxge_hw_device_intr_enable(vdev->devh); | 
|  |  | 
|  | smp_wmb(); | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vxge_hw_vpath_enable(vdev->vpaths[i].handle); | 
|  | smp_wmb(); | 
|  | vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle); | 
|  | } | 
|  |  | 
|  | vxge_start_all_tx_queue(vdev); | 
|  | goto out0; | 
|  |  | 
|  | out2: | 
|  | vxge_rem_isr(vdev); | 
|  |  | 
|  | /* Disable napi */ | 
|  | if (vdev->config.intr_type != MSI_X) | 
|  | napi_disable(&vdev->napi); | 
|  | else { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | napi_disable(&vdev->vpaths[i].ring.napi); | 
|  | } | 
|  |  | 
|  | out1: | 
|  | vxge_close_vpaths(vdev, 0); | 
|  | out0: | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d  Exiting...", | 
|  | dev->name, __func__, __LINE__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Loop throught the mac address list and delete all the entries */ | 
|  | void vxge_free_mac_add_list(struct vxge_vpath *vpath) | 
|  | { | 
|  |  | 
|  | struct list_head *entry, *next; | 
|  | if (list_empty(&vpath->mac_addr_list)) | 
|  | return; | 
|  |  | 
|  | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | 
|  | list_del(entry); | 
|  | kfree((struct vxge_mac_addrs *)entry); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void vxge_napi_del_all(struct vxgedev *vdev) | 
|  | { | 
|  | int i; | 
|  | if (vdev->config.intr_type != MSI_X) | 
|  | netif_napi_del(&vdev->napi); | 
|  | else { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | netif_napi_del(&vdev->vpaths[i].ring.napi); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | int do_vxge_close(struct net_device *dev, int do_io) | 
|  | { | 
|  | enum vxge_hw_status status; | 
|  | struct vxgedev *vdev; | 
|  | struct __vxge_hw_device *hldev; | 
|  | int i; | 
|  | u64 val64, vpath_vector; | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
|  | dev->name, __func__, __LINE__); | 
|  |  | 
|  | vdev = (struct vxgedev *)netdev_priv(dev); | 
|  | hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | 
|  |  | 
|  | if (unlikely(!is_vxge_card_up(vdev))) | 
|  | return 0; | 
|  |  | 
|  | /* If vxge_handle_crit_err task is executing, | 
|  | * wait till it completes. */ | 
|  | while (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | 
|  | msleep(50); | 
|  |  | 
|  | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  | if (do_io) { | 
|  | /* Put the vpath back in normal mode */ | 
|  | vpath_vector = vxge_mBIT(vdev->vpaths[0].device_id); | 
|  | status = vxge_hw_mgmt_reg_read(vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof( | 
|  | struct vxge_hw_mrpcim_reg, | 
|  | rts_mgr_cbasin_cfg), | 
|  | &val64); | 
|  |  | 
|  | if (status == VXGE_HW_OK) { | 
|  | val64 &= ~vpath_vector; | 
|  | status = vxge_hw_mgmt_reg_write(vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof( | 
|  | struct vxge_hw_mrpcim_reg, | 
|  | rts_mgr_cbasin_cfg), | 
|  | val64); | 
|  | } | 
|  |  | 
|  | /* Remove the function 0 from promiscous mode */ | 
|  | vxge_hw_mgmt_reg_write(vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | 
|  | rxmac_authorize_all_addr), | 
|  | 0); | 
|  |  | 
|  | vxge_hw_mgmt_reg_write(vdev->devh, | 
|  | vxge_hw_mgmt_reg_type_mrpcim, | 
|  | 0, | 
|  | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | 
|  | rxmac_authorize_all_vid), | 
|  | 0); | 
|  |  | 
|  | smp_wmb(); | 
|  | } | 
|  | del_timer_sync(&vdev->vp_lockup_timer); | 
|  |  | 
|  | del_timer_sync(&vdev->vp_reset_timer); | 
|  |  | 
|  | /* Disable napi */ | 
|  | if (vdev->config.intr_type != MSI_X) | 
|  | napi_disable(&vdev->napi); | 
|  | else { | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | napi_disable(&vdev->vpaths[i].ring.napi); | 
|  | } | 
|  |  | 
|  | netif_carrier_off(vdev->ndev); | 
|  | printk(KERN_NOTICE "%s: Link Down\n", vdev->ndev->name); | 
|  | vxge_stop_all_tx_queue(vdev); | 
|  |  | 
|  | /* Note that at this point xmit() is stopped by upper layer */ | 
|  | if (do_io) | 
|  | vxge_hw_device_intr_disable(vdev->devh); | 
|  |  | 
|  | mdelay(1000); | 
|  |  | 
|  | vxge_rem_isr(vdev); | 
|  |  | 
|  | vxge_napi_del_all(vdev); | 
|  |  | 
|  | if (do_io) | 
|  | vxge_reset_all_vpaths(vdev); | 
|  |  | 
|  | vxge_close_vpaths(vdev, 0); | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s: %s:%d  Exiting...", dev->name, __func__, __LINE__); | 
|  |  | 
|  | clear_bit(__VXGE_STATE_CARD_UP, &driver_config->inta_dev_open); | 
|  | clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_close | 
|  | * @dev: device pointer. | 
|  | * | 
|  | * This is the stop entry point of the driver. It needs to undo exactly | 
|  | * whatever was done by the open entry point, thus it's usually referred to | 
|  | * as the close function.Among other things this function mainly stops the | 
|  | * Rx side of the NIC and frees all the Rx buffers in the Rx rings. | 
|  | * Return value: '0' on success and an appropriate (-)ve integer as | 
|  | * defined in errno.h file on failure. | 
|  | */ | 
|  | int | 
|  | vxge_close(struct net_device *dev) | 
|  | { | 
|  | do_vxge_close(dev, 1); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_change_mtu | 
|  | * @dev: net device pointer. | 
|  | * @new_mtu :the new MTU size for the device. | 
|  | * | 
|  | * A driver entry point to change MTU size for the device. Before changing | 
|  | * the MTU the device must be stopped. | 
|  | */ | 
|  | static int vxge_change_mtu(struct net_device *dev, int new_mtu) | 
|  | { | 
|  | struct vxgedev *vdev = netdev_priv(dev); | 
|  |  | 
|  | vxge_debug_entryexit(vdev->level_trace, | 
|  | "%s:%d", __func__, __LINE__); | 
|  | if ((new_mtu < VXGE_HW_MIN_MTU) || (new_mtu > VXGE_HW_MAX_MTU)) { | 
|  | vxge_debug_init(vdev->level_err, | 
|  | "%s: mtu size is invalid", dev->name); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | /* check if device is down already */ | 
|  | if (unlikely(!is_vxge_card_up(vdev))) { | 
|  | /* just store new value, will use later on open() */ | 
|  | dev->mtu = new_mtu; | 
|  | vxge_debug_init(vdev->level_err, | 
|  | "%s", "device is down on MTU change"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | vxge_debug_init(vdev->level_trace, | 
|  | "trying to apply new MTU %d", new_mtu); | 
|  |  | 
|  | if (vxge_close(dev)) | 
|  | return -EIO; | 
|  |  | 
|  | dev->mtu = new_mtu; | 
|  | vdev->mtu = new_mtu; | 
|  |  | 
|  | if (vxge_open(dev)) | 
|  | return -EIO; | 
|  |  | 
|  | vxge_debug_init(vdev->level_trace, | 
|  | "%s: MTU changed to %d", vdev->ndev->name, new_mtu); | 
|  |  | 
|  | vxge_debug_entryexit(vdev->level_trace, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_get_stats | 
|  | * @dev: pointer to the device structure | 
|  | * | 
|  | * Updates the device statistics structure. This function updates the device | 
|  | * statistics structure in the net_device structure and returns a pointer | 
|  | * to the same. | 
|  | */ | 
|  | static struct net_device_stats * | 
|  | vxge_get_stats(struct net_device *dev) | 
|  | { | 
|  | struct vxgedev *vdev; | 
|  | struct net_device_stats *net_stats; | 
|  | int k; | 
|  |  | 
|  | vdev = netdev_priv(dev); | 
|  |  | 
|  | net_stats = &vdev->stats.net_stats; | 
|  |  | 
|  | memset(net_stats, 0, sizeof(struct net_device_stats)); | 
|  |  | 
|  | for (k = 0; k < vdev->no_of_vpath; k++) { | 
|  | net_stats->rx_packets += vdev->vpaths[k].ring.stats.rx_frms; | 
|  | net_stats->rx_bytes += vdev->vpaths[k].ring.stats.rx_bytes; | 
|  | net_stats->rx_errors += vdev->vpaths[k].ring.stats.rx_errors; | 
|  | net_stats->multicast += vdev->vpaths[k].ring.stats.rx_mcast; | 
|  | net_stats->rx_dropped += | 
|  | vdev->vpaths[k].ring.stats.rx_dropped; | 
|  |  | 
|  | net_stats->tx_packets += vdev->vpaths[k].fifo.stats.tx_frms; | 
|  | net_stats->tx_bytes += vdev->vpaths[k].fifo.stats.tx_bytes; | 
|  | net_stats->tx_errors += vdev->vpaths[k].fifo.stats.tx_errors; | 
|  | } | 
|  |  | 
|  | return net_stats; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_ioctl | 
|  | * @dev: Device pointer. | 
|  | * @ifr: An IOCTL specific structure, that can contain a pointer to | 
|  | *       a proprietary structure used to pass information to the driver. | 
|  | * @cmd: This is used to distinguish between the different commands that | 
|  | *       can be passed to the IOCTL functions. | 
|  | * | 
|  | * Entry point for the Ioctl. | 
|  | */ | 
|  | static int vxge_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | 
|  | { | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_tx_watchdog | 
|  | * @dev: pointer to net device structure | 
|  | * | 
|  | * Watchdog for transmit side. | 
|  | * This function is triggered if the Tx Queue is stopped | 
|  | * for a pre-defined amount of time when the Interface is still up. | 
|  | */ | 
|  | static void | 
|  | vxge_tx_watchdog(struct net_device *dev) | 
|  | { | 
|  | struct vxgedev *vdev; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | vdev = (struct vxgedev *)netdev_priv(dev); | 
|  |  | 
|  | vdev->cric_err_event = VXGE_HW_EVENT_RESET_START; | 
|  |  | 
|  | vxge_reset(vdev); | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_vlan_rx_register | 
|  | * @dev: net device pointer. | 
|  | * @grp: vlan group | 
|  | * | 
|  | * Vlan group registration | 
|  | */ | 
|  | static void | 
|  | vxge_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) | 
|  | { | 
|  | struct vxgedev *vdev; | 
|  | struct vxge_vpath *vpath; | 
|  | int vp; | 
|  | u64 vid; | 
|  | enum vxge_hw_status status; | 
|  | int i; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | vdev = (struct vxgedev *)netdev_priv(dev); | 
|  |  | 
|  | vpath = &vdev->vpaths[0]; | 
|  | if ((NULL == grp) && (vpath->is_open)) { | 
|  | /* Get the first vlan */ | 
|  | status = vxge_hw_vpath_vid_get(vpath->handle, &vid); | 
|  |  | 
|  | while (status == VXGE_HW_OK) { | 
|  |  | 
|  | /* Delete this vlan from the vid table */ | 
|  | for (vp = 0; vp < vdev->no_of_vpath; vp++) { | 
|  | vpath = &vdev->vpaths[vp]; | 
|  | if (!vpath->is_open) | 
|  | continue; | 
|  |  | 
|  | vxge_hw_vpath_vid_delete(vpath->handle, vid); | 
|  | } | 
|  |  | 
|  | /* Get the next vlan to be deleted */ | 
|  | vpath = &vdev->vpaths[0]; | 
|  | status = vxge_hw_vpath_vid_get(vpath->handle, &vid); | 
|  | } | 
|  | } | 
|  |  | 
|  | vdev->vlgrp = grp; | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | if (vdev->vpaths[i].is_configured) | 
|  | vdev->vpaths[i].ring.vlgrp = grp; | 
|  | } | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_vlan_rx_add_vid | 
|  | * @dev: net device pointer. | 
|  | * @vid: vid | 
|  | * | 
|  | * Add the vlan id to the devices vlan id table | 
|  | */ | 
|  | static void | 
|  | vxge_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) | 
|  | { | 
|  | struct vxgedev *vdev; | 
|  | struct vxge_vpath *vpath; | 
|  | int vp_id; | 
|  |  | 
|  | vdev = (struct vxgedev *)netdev_priv(dev); | 
|  |  | 
|  | /* Add these vlan to the vid table */ | 
|  | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | 
|  | vpath = &vdev->vpaths[vp_id]; | 
|  | if (!vpath->is_open) | 
|  | continue; | 
|  | vxge_hw_vpath_vid_add(vpath->handle, vid); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_vlan_rx_add_vid | 
|  | * @dev: net device pointer. | 
|  | * @vid: vid | 
|  | * | 
|  | * Remove the vlan id from the device's vlan id table | 
|  | */ | 
|  | static void | 
|  | vxge_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) | 
|  | { | 
|  | struct vxgedev *vdev; | 
|  | struct vxge_vpath *vpath; | 
|  | int vp_id; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | vdev = (struct vxgedev *)netdev_priv(dev); | 
|  |  | 
|  | vlan_group_set_device(vdev->vlgrp, vid, NULL); | 
|  |  | 
|  | /* Delete this vlan from the vid table */ | 
|  | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | 
|  | vpath = &vdev->vpaths[vp_id]; | 
|  | if (!vpath->is_open) | 
|  | continue; | 
|  | vxge_hw_vpath_vid_delete(vpath->handle, vid); | 
|  | } | 
|  | vxge_debug_entryexit(VXGE_TRACE, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops vxge_netdev_ops = { | 
|  | .ndo_open               = vxge_open, | 
|  | .ndo_stop               = vxge_close, | 
|  | .ndo_get_stats          = vxge_get_stats, | 
|  | .ndo_start_xmit         = vxge_xmit, | 
|  | .ndo_validate_addr      = eth_validate_addr, | 
|  | .ndo_set_multicast_list = vxge_set_multicast, | 
|  |  | 
|  | .ndo_do_ioctl           = vxge_ioctl, | 
|  |  | 
|  | .ndo_set_mac_address    = vxge_set_mac_addr, | 
|  | .ndo_change_mtu         = vxge_change_mtu, | 
|  | .ndo_vlan_rx_register   = vxge_vlan_rx_register, | 
|  | .ndo_vlan_rx_kill_vid   = vxge_vlan_rx_kill_vid, | 
|  | .ndo_vlan_rx_add_vid	= vxge_vlan_rx_add_vid, | 
|  |  | 
|  | .ndo_tx_timeout         = vxge_tx_watchdog, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller    = vxge_netpoll, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | int __devinit vxge_device_register(struct __vxge_hw_device *hldev, | 
|  | struct vxge_config *config, | 
|  | int high_dma, int no_of_vpath, | 
|  | struct vxgedev **vdev_out) | 
|  | { | 
|  | struct net_device *ndev; | 
|  | enum vxge_hw_status status = VXGE_HW_OK; | 
|  | struct vxgedev *vdev; | 
|  | int i, ret = 0, no_of_queue = 1; | 
|  | u64 stat; | 
|  |  | 
|  | *vdev_out = NULL; | 
|  | if (config->tx_steering_type == TX_MULTIQ_STEERING) | 
|  | no_of_queue = no_of_vpath; | 
|  |  | 
|  | ndev = alloc_etherdev_mq(sizeof(struct vxgedev), | 
|  | no_of_queue); | 
|  | if (ndev == NULL) { | 
|  | vxge_debug_init( | 
|  | vxge_hw_device_trace_level_get(hldev), | 
|  | "%s : device allocation failed", __func__); | 
|  | ret = -ENODEV; | 
|  | goto _out0; | 
|  | } | 
|  |  | 
|  | vxge_debug_entryexit( | 
|  | vxge_hw_device_trace_level_get(hldev), | 
|  | "%s: %s:%d  Entering...", | 
|  | ndev->name, __func__, __LINE__); | 
|  |  | 
|  | vdev = netdev_priv(ndev); | 
|  | memset(vdev, 0, sizeof(struct vxgedev)); | 
|  |  | 
|  | vdev->ndev = ndev; | 
|  | vdev->devh = hldev; | 
|  | vdev->pdev = hldev->pdev; | 
|  | memcpy(&vdev->config, config, sizeof(struct vxge_config)); | 
|  | vdev->rx_csum = 1;	/* Enable Rx CSUM by default. */ | 
|  |  | 
|  | SET_NETDEV_DEV(ndev, &vdev->pdev->dev); | 
|  |  | 
|  | ndev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | | 
|  | NETIF_F_HW_VLAN_FILTER; | 
|  | /*  Driver entry points */ | 
|  | ndev->irq = vdev->pdev->irq; | 
|  | ndev->base_addr = (unsigned long) hldev->bar0; | 
|  |  | 
|  | ndev->netdev_ops = &vxge_netdev_ops; | 
|  |  | 
|  | ndev->watchdog_timeo = VXGE_LL_WATCH_DOG_TIMEOUT; | 
|  |  | 
|  | initialize_ethtool_ops(ndev); | 
|  |  | 
|  | /* Allocate memory for vpath */ | 
|  | vdev->vpaths = kzalloc((sizeof(struct vxge_vpath)) * | 
|  | no_of_vpath, GFP_KERNEL); | 
|  | if (!vdev->vpaths) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: vpath memory allocation failed", | 
|  | vdev->ndev->name); | 
|  | ret = -ENODEV; | 
|  | goto _out1; | 
|  | } | 
|  |  | 
|  | ndev->features |= NETIF_F_SG; | 
|  |  | 
|  | ndev->features |= NETIF_F_HW_CSUM; | 
|  | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | 
|  | "%s : checksuming enabled", __func__); | 
|  |  | 
|  | if (high_dma) { | 
|  | ndev->features |= NETIF_F_HIGHDMA; | 
|  | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | 
|  | "%s : using High DMA", __func__); | 
|  | } | 
|  |  | 
|  | ndev->features |= NETIF_F_TSO | NETIF_F_TSO6; | 
|  |  | 
|  | if (vdev->config.gro_enable) | 
|  | ndev->features |= NETIF_F_GRO; | 
|  |  | 
|  | if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) | 
|  | ndev->real_num_tx_queues = no_of_vpath; | 
|  |  | 
|  | #ifdef NETIF_F_LLTX | 
|  | ndev->features |= NETIF_F_LLTX; | 
|  | #endif | 
|  |  | 
|  | for (i = 0; i < no_of_vpath; i++) | 
|  | spin_lock_init(&vdev->vpaths[i].fifo.tx_lock); | 
|  |  | 
|  | if (register_netdev(ndev)) { | 
|  | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | 
|  | "%s: %s : device registration failed!", | 
|  | ndev->name, __func__); | 
|  | ret = -ENODEV; | 
|  | goto _out2; | 
|  | } | 
|  |  | 
|  | /*  Set the factory defined MAC address initially */ | 
|  | ndev->addr_len = ETH_ALEN; | 
|  |  | 
|  | /* Make Link state as off at this point, when the Link change | 
|  | * interrupt comes the state will be automatically changed to | 
|  | * the right state. | 
|  | */ | 
|  | netif_carrier_off(ndev); | 
|  |  | 
|  | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | 
|  | "%s: Ethernet device registered", | 
|  | ndev->name); | 
|  |  | 
|  | *vdev_out = vdev; | 
|  |  | 
|  | /* Resetting the Device stats */ | 
|  | status = vxge_hw_mrpcim_stats_access( | 
|  | hldev, | 
|  | VXGE_HW_STATS_OP_CLEAR_ALL_STATS, | 
|  | 0, | 
|  | 0, | 
|  | &stat); | 
|  |  | 
|  | if (status == VXGE_HW_ERR_PRIVILAGED_OPEARATION) | 
|  | vxge_debug_init( | 
|  | vxge_hw_device_trace_level_get(hldev), | 
|  | "%s: device stats clear returns" | 
|  | "VXGE_HW_ERR_PRIVILAGED_OPEARATION", ndev->name); | 
|  |  | 
|  | vxge_debug_entryexit(vxge_hw_device_trace_level_get(hldev), | 
|  | "%s: %s:%d  Exiting...", | 
|  | ndev->name, __func__, __LINE__); | 
|  |  | 
|  | return ret; | 
|  | _out2: | 
|  | kfree(vdev->vpaths); | 
|  | _out1: | 
|  | free_netdev(ndev); | 
|  | _out0: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_device_unregister | 
|  | * | 
|  | * This function will unregister and free network device | 
|  | */ | 
|  | void | 
|  | vxge_device_unregister(struct __vxge_hw_device *hldev) | 
|  | { | 
|  | struct vxgedev *vdev; | 
|  | struct net_device *dev; | 
|  | char buf[IFNAMSIZ]; | 
|  | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | 
|  | (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | 
|  | u32 level_trace; | 
|  | #endif | 
|  |  | 
|  | dev = hldev->ndev; | 
|  | vdev = netdev_priv(dev); | 
|  | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | 
|  | (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | 
|  | level_trace = vdev->level_trace; | 
|  | #endif | 
|  | vxge_debug_entryexit(level_trace, | 
|  | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | memcpy(buf, vdev->ndev->name, IFNAMSIZ); | 
|  |  | 
|  | /* in 2.6 will call stop() if device is up */ | 
|  | unregister_netdev(dev); | 
|  |  | 
|  | flush_scheduled_work(); | 
|  |  | 
|  | vxge_debug_init(level_trace, "%s: ethernet device unregistered", buf); | 
|  | vxge_debug_entryexit(level_trace, | 
|  | "%s: %s:%d  Exiting...", buf, __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vxge_callback_crit_err | 
|  | * | 
|  | * This function is called by the alarm handler in interrupt context. | 
|  | * Driver must analyze it based on the event type. | 
|  | */ | 
|  | static void | 
|  | vxge_callback_crit_err(struct __vxge_hw_device *hldev, | 
|  | enum vxge_hw_event type, u64 vp_id) | 
|  | { | 
|  | struct net_device *dev = hldev->ndev; | 
|  | struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev); | 
|  | int vpath_idx; | 
|  |  | 
|  | vxge_debug_entryexit(vdev->level_trace, | 
|  | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | /* Note: This event type should be used for device wide | 
|  | * indications only - Serious errors, Slot freeze and critical errors | 
|  | */ | 
|  | vdev->cric_err_event = type; | 
|  |  | 
|  | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) | 
|  | if (vdev->vpaths[vpath_idx].device_id == vp_id) | 
|  | break; | 
|  |  | 
|  | if (!test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) { | 
|  | if (type == VXGE_HW_EVENT_SLOT_FREEZE) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Slot is frozen", vdev->ndev->name); | 
|  | } else if (type == VXGE_HW_EVENT_SERR) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Encountered Serious Error", | 
|  | vdev->ndev->name); | 
|  | } else if (type == VXGE_HW_EVENT_CRITICAL_ERR) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Encountered Critical Error", | 
|  | vdev->ndev->name); | 
|  | } | 
|  |  | 
|  | if ((type == VXGE_HW_EVENT_SERR) || | 
|  | (type == VXGE_HW_EVENT_SLOT_FREEZE)) { | 
|  | if (unlikely(vdev->exec_mode)) | 
|  | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  | } else if (type == VXGE_HW_EVENT_CRITICAL_ERR) { | 
|  | vxge_hw_device_mask_all(hldev); | 
|  | if (unlikely(vdev->exec_mode)) | 
|  | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  | } else if ((type == VXGE_HW_EVENT_FIFO_ERR) || | 
|  | (type == VXGE_HW_EVENT_VPATH_ERR)) { | 
|  |  | 
|  | if (unlikely(vdev->exec_mode)) | 
|  | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
|  | else { | 
|  | /* check if this vpath is already set for reset */ | 
|  | if (!test_and_set_bit(vpath_idx, &vdev->vp_reset)) { | 
|  |  | 
|  | /* disable interrupts for this vpath */ | 
|  | vxge_vpath_intr_disable(vdev, vpath_idx); | 
|  |  | 
|  | /* stop the queue for this vpath */ | 
|  | vxge_stop_tx_queue(&vdev->vpaths[vpath_idx]. | 
|  | fifo); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | vxge_debug_entryexit(vdev->level_trace, | 
|  | "%s: %s:%d  Exiting...", | 
|  | vdev->ndev->name, __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | static void verify_bandwidth(void) | 
|  | { | 
|  | int i, band_width, total = 0, equal_priority = 0; | 
|  |  | 
|  | /* 1. If user enters 0 for some fifo, give equal priority to all */ | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
|  | if (bw_percentage[i] == 0) { | 
|  | equal_priority = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!equal_priority) { | 
|  | /* 2. If sum exceeds 100, give equal priority to all */ | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
|  | if (bw_percentage[i] == 0xFF) | 
|  | break; | 
|  |  | 
|  | total += bw_percentage[i]; | 
|  | if (total > VXGE_HW_VPATH_BANDWIDTH_MAX) { | 
|  | equal_priority = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!equal_priority) { | 
|  | /* Is all the bandwidth consumed? */ | 
|  | if (total < VXGE_HW_VPATH_BANDWIDTH_MAX) { | 
|  | if (i < VXGE_HW_MAX_VIRTUAL_PATHS) { | 
|  | /* Split rest of bw equally among next VPs*/ | 
|  | band_width = | 
|  | (VXGE_HW_VPATH_BANDWIDTH_MAX  - total) / | 
|  | (VXGE_HW_MAX_VIRTUAL_PATHS - i); | 
|  | if (band_width < 2) /* min of 2% */ | 
|  | equal_priority = 1; | 
|  | else { | 
|  | for (; i < VXGE_HW_MAX_VIRTUAL_PATHS; | 
|  | i++) | 
|  | bw_percentage[i] = | 
|  | band_width; | 
|  | } | 
|  | } | 
|  | } else if (i < VXGE_HW_MAX_VIRTUAL_PATHS) | 
|  | equal_priority = 1; | 
|  | } | 
|  |  | 
|  | if (equal_priority) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Assigning equal bandwidth to all the vpaths", | 
|  | VXGE_DRIVER_NAME); | 
|  | bw_percentage[0] = VXGE_HW_VPATH_BANDWIDTH_MAX / | 
|  | VXGE_HW_MAX_VIRTUAL_PATHS; | 
|  | for (i = 1; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | 
|  | bw_percentage[i] = bw_percentage[0]; | 
|  | } | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Vpath configuration | 
|  | */ | 
|  | static int __devinit vxge_config_vpaths( | 
|  | struct vxge_hw_device_config *device_config, | 
|  | u64 vpath_mask, struct vxge_config *config_param) | 
|  | { | 
|  | int i, no_of_vpaths = 0, default_no_vpath = 0, temp; | 
|  | u32 txdl_size, txdl_per_memblock; | 
|  |  | 
|  | temp = driver_config->vpath_per_dev; | 
|  | if ((driver_config->vpath_per_dev == VXGE_USE_DEFAULT) && | 
|  | (max_config_dev == VXGE_MAX_CONFIG_DEV)) { | 
|  | /* No more CPU. Return vpath number as zero.*/ | 
|  | if (driver_config->g_no_cpus == -1) | 
|  | return 0; | 
|  |  | 
|  | if (!driver_config->g_no_cpus) | 
|  | driver_config->g_no_cpus = num_online_cpus(); | 
|  |  | 
|  | driver_config->vpath_per_dev = driver_config->g_no_cpus >> 1; | 
|  | if (!driver_config->vpath_per_dev) | 
|  | driver_config->vpath_per_dev = 1; | 
|  |  | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | 
|  | if (!vxge_bVALn(vpath_mask, i, 1)) | 
|  | continue; | 
|  | else | 
|  | default_no_vpath++; | 
|  | if (default_no_vpath < driver_config->vpath_per_dev) | 
|  | driver_config->vpath_per_dev = default_no_vpath; | 
|  |  | 
|  | driver_config->g_no_cpus = driver_config->g_no_cpus - | 
|  | (driver_config->vpath_per_dev * 2); | 
|  | if (driver_config->g_no_cpus <= 0) | 
|  | driver_config->g_no_cpus = -1; | 
|  | } | 
|  |  | 
|  | if (driver_config->vpath_per_dev == 1) { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: Disable tx and rx steering, " | 
|  | "as single vpath is configured", VXGE_DRIVER_NAME); | 
|  | config_param->rth_steering = NO_STEERING; | 
|  | config_param->tx_steering_type = NO_STEERING; | 
|  | device_config->rth_en = 0; | 
|  | } | 
|  |  | 
|  | /* configure bandwidth */ | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | 
|  | device_config->vp_config[i].min_bandwidth = bw_percentage[i]; | 
|  |  | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
|  | device_config->vp_config[i].vp_id = i; | 
|  | device_config->vp_config[i].mtu = VXGE_HW_DEFAULT_MTU; | 
|  | if (no_of_vpaths < driver_config->vpath_per_dev) { | 
|  | if (!vxge_bVALn(vpath_mask, i, 1)) { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: vpath: %d is not available", | 
|  | VXGE_DRIVER_NAME, i); | 
|  | continue; | 
|  | } else { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: vpath: %d available", | 
|  | VXGE_DRIVER_NAME, i); | 
|  | no_of_vpaths++; | 
|  | } | 
|  | } else { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: vpath: %d is not configured, " | 
|  | "max_config_vpath exceeded", | 
|  | VXGE_DRIVER_NAME, i); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Configure Tx fifo's */ | 
|  | device_config->vp_config[i].fifo.enable = | 
|  | VXGE_HW_FIFO_ENABLE; | 
|  | device_config->vp_config[i].fifo.max_frags = | 
|  | MAX_SKB_FRAGS; | 
|  | device_config->vp_config[i].fifo.memblock_size = | 
|  | VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE; | 
|  |  | 
|  | txdl_size = MAX_SKB_FRAGS * sizeof(struct vxge_hw_fifo_txd); | 
|  | txdl_per_memblock = VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE / txdl_size; | 
|  |  | 
|  | device_config->vp_config[i].fifo.fifo_blocks = | 
|  | ((VXGE_DEF_FIFO_LENGTH - 1) / txdl_per_memblock) + 1; | 
|  |  | 
|  | device_config->vp_config[i].fifo.intr = | 
|  | VXGE_HW_FIFO_QUEUE_INTR_DISABLE; | 
|  |  | 
|  | /* Configure tti properties */ | 
|  | device_config->vp_config[i].tti.intr_enable = | 
|  | VXGE_HW_TIM_INTR_ENABLE; | 
|  |  | 
|  | device_config->vp_config[i].tti.btimer_val = | 
|  | (VXGE_TTI_BTIMER_VAL * 1000) / 272; | 
|  |  | 
|  | device_config->vp_config[i].tti.timer_ac_en = | 
|  | VXGE_HW_TIM_TIMER_AC_ENABLE; | 
|  |  | 
|  | /* For msi-x with napi (each vector | 
|  | has a handler of its own) - | 
|  | Set CI to OFF for all vpaths */ | 
|  | device_config->vp_config[i].tti.timer_ci_en = | 
|  | VXGE_HW_TIM_TIMER_CI_DISABLE; | 
|  |  | 
|  | device_config->vp_config[i].tti.timer_ri_en = | 
|  | VXGE_HW_TIM_TIMER_RI_DISABLE; | 
|  |  | 
|  | device_config->vp_config[i].tti.util_sel = | 
|  | VXGE_HW_TIM_UTIL_SEL_LEGACY_TX_NET_UTIL; | 
|  |  | 
|  | device_config->vp_config[i].tti.ltimer_val = | 
|  | (VXGE_TTI_LTIMER_VAL * 1000) / 272; | 
|  |  | 
|  | device_config->vp_config[i].tti.rtimer_val = | 
|  | (VXGE_TTI_RTIMER_VAL * 1000) / 272; | 
|  |  | 
|  | device_config->vp_config[i].tti.urange_a = TTI_TX_URANGE_A; | 
|  | device_config->vp_config[i].tti.urange_b = TTI_TX_URANGE_B; | 
|  | device_config->vp_config[i].tti.urange_c = TTI_TX_URANGE_C; | 
|  | device_config->vp_config[i].tti.uec_a = TTI_TX_UFC_A; | 
|  | device_config->vp_config[i].tti.uec_b = TTI_TX_UFC_B; | 
|  | device_config->vp_config[i].tti.uec_c = TTI_TX_UFC_C; | 
|  | device_config->vp_config[i].tti.uec_d = TTI_TX_UFC_D; | 
|  |  | 
|  | /* Configure Rx rings */ | 
|  | device_config->vp_config[i].ring.enable  = | 
|  | VXGE_HW_RING_ENABLE; | 
|  |  | 
|  | device_config->vp_config[i].ring.ring_blocks  = | 
|  | VXGE_HW_DEF_RING_BLOCKS; | 
|  | device_config->vp_config[i].ring.buffer_mode = | 
|  | VXGE_HW_RING_RXD_BUFFER_MODE_1; | 
|  | device_config->vp_config[i].ring.rxds_limit  = | 
|  | VXGE_HW_DEF_RING_RXDS_LIMIT; | 
|  | device_config->vp_config[i].ring.scatter_mode = | 
|  | VXGE_HW_RING_SCATTER_MODE_A; | 
|  |  | 
|  | /* Configure rti properties */ | 
|  | device_config->vp_config[i].rti.intr_enable = | 
|  | VXGE_HW_TIM_INTR_ENABLE; | 
|  |  | 
|  | device_config->vp_config[i].rti.btimer_val = | 
|  | (VXGE_RTI_BTIMER_VAL * 1000)/272; | 
|  |  | 
|  | device_config->vp_config[i].rti.timer_ac_en = | 
|  | VXGE_HW_TIM_TIMER_AC_ENABLE; | 
|  |  | 
|  | device_config->vp_config[i].rti.timer_ci_en = | 
|  | VXGE_HW_TIM_TIMER_CI_DISABLE; | 
|  |  | 
|  | device_config->vp_config[i].rti.timer_ri_en = | 
|  | VXGE_HW_TIM_TIMER_RI_DISABLE; | 
|  |  | 
|  | device_config->vp_config[i].rti.util_sel = | 
|  | VXGE_HW_TIM_UTIL_SEL_LEGACY_RX_NET_UTIL; | 
|  |  | 
|  | device_config->vp_config[i].rti.urange_a = | 
|  | RTI_RX_URANGE_A; | 
|  | device_config->vp_config[i].rti.urange_b = | 
|  | RTI_RX_URANGE_B; | 
|  | device_config->vp_config[i].rti.urange_c = | 
|  | RTI_RX_URANGE_C; | 
|  | device_config->vp_config[i].rti.uec_a = RTI_RX_UFC_A; | 
|  | device_config->vp_config[i].rti.uec_b = RTI_RX_UFC_B; | 
|  | device_config->vp_config[i].rti.uec_c = RTI_RX_UFC_C; | 
|  | device_config->vp_config[i].rti.uec_d = RTI_RX_UFC_D; | 
|  |  | 
|  | device_config->vp_config[i].rti.rtimer_val = | 
|  | (VXGE_RTI_RTIMER_VAL * 1000) / 272; | 
|  |  | 
|  | device_config->vp_config[i].rti.ltimer_val = | 
|  | (VXGE_RTI_LTIMER_VAL * 1000) / 272; | 
|  |  | 
|  | device_config->vp_config[i].rpa_strip_vlan_tag = | 
|  | vlan_tag_strip; | 
|  | } | 
|  |  | 
|  | driver_config->vpath_per_dev = temp; | 
|  | return no_of_vpaths; | 
|  | } | 
|  |  | 
|  | /* initialize device configuratrions */ | 
|  | static void __devinit vxge_device_config_init( | 
|  | struct vxge_hw_device_config *device_config, | 
|  | int *intr_type) | 
|  | { | 
|  | /* Used for CQRQ/SRQ. */ | 
|  | device_config->dma_blockpool_initial = | 
|  | VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE; | 
|  |  | 
|  | device_config->dma_blockpool_max = | 
|  | VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE; | 
|  |  | 
|  | if (max_mac_vpath > VXGE_MAX_MAC_ADDR_COUNT) | 
|  | max_mac_vpath = VXGE_MAX_MAC_ADDR_COUNT; | 
|  |  | 
|  | #ifndef CONFIG_PCI_MSI | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: This Kernel does not support " | 
|  | "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME); | 
|  | *intr_type = INTA; | 
|  | #endif | 
|  |  | 
|  | /* Configure whether MSI-X or IRQL. */ | 
|  | switch (*intr_type) { | 
|  | case INTA: | 
|  | device_config->intr_mode = VXGE_HW_INTR_MODE_IRQLINE; | 
|  | break; | 
|  |  | 
|  | case MSI_X: | 
|  | device_config->intr_mode = VXGE_HW_INTR_MODE_MSIX; | 
|  | break; | 
|  | } | 
|  | /* Timer period between device poll */ | 
|  | device_config->device_poll_millis = VXGE_TIMER_DELAY; | 
|  |  | 
|  | /* Configure mac based steering. */ | 
|  | device_config->rts_mac_en = addr_learn_en; | 
|  |  | 
|  | /* Configure Vpaths */ | 
|  | device_config->rth_it_type = VXGE_HW_RTH_IT_TYPE_MULTI_IT; | 
|  |  | 
|  | vxge_debug_ll_config(VXGE_TRACE, "%s : Device Config Params ", | 
|  | __func__); | 
|  | vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_initial : %d", | 
|  | device_config->dma_blockpool_initial); | 
|  | vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_max : %d", | 
|  | device_config->dma_blockpool_max); | 
|  | vxge_debug_ll_config(VXGE_TRACE, "intr_mode : %d", | 
|  | device_config->intr_mode); | 
|  | vxge_debug_ll_config(VXGE_TRACE, "device_poll_millis : %d", | 
|  | device_config->device_poll_millis); | 
|  | vxge_debug_ll_config(VXGE_TRACE, "rts_mac_en : %d", | 
|  | device_config->rts_mac_en); | 
|  | vxge_debug_ll_config(VXGE_TRACE, "rth_en : %d", | 
|  | device_config->rth_en); | 
|  | vxge_debug_ll_config(VXGE_TRACE, "rth_it_type : %d", | 
|  | device_config->rth_it_type); | 
|  | } | 
|  |  | 
|  | static void __devinit vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: %d Vpath(s) opened", | 
|  | vdev->ndev->name, vdev->no_of_vpath); | 
|  |  | 
|  | switch (vdev->config.intr_type) { | 
|  | case INTA: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Interrupt type INTA", vdev->ndev->name); | 
|  | break; | 
|  |  | 
|  | case MSI_X: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Interrupt type MSI-X", vdev->ndev->name); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (vdev->config.rth_steering) { | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: RTH steering enabled for TCP_IPV4", | 
|  | vdev->ndev->name); | 
|  | } else { | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: RTH steering disabled", vdev->ndev->name); | 
|  | } | 
|  |  | 
|  | switch (vdev->config.tx_steering_type) { | 
|  | case NO_STEERING: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Tx steering disabled", vdev->ndev->name); | 
|  | break; | 
|  | case TX_PRIORITY_STEERING: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Unsupported tx steering option", | 
|  | vdev->ndev->name); | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Tx steering disabled", vdev->ndev->name); | 
|  | vdev->config.tx_steering_type = 0; | 
|  | break; | 
|  | case TX_VLAN_STEERING: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Unsupported tx steering option", | 
|  | vdev->ndev->name); | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Tx steering disabled", vdev->ndev->name); | 
|  | vdev->config.tx_steering_type = 0; | 
|  | break; | 
|  | case TX_MULTIQ_STEERING: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Tx multiqueue steering enabled", | 
|  | vdev->ndev->name); | 
|  | break; | 
|  | case TX_PORT_STEERING: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Tx port steering enabled", | 
|  | vdev->ndev->name); | 
|  | break; | 
|  | default: | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Unsupported tx steering type", | 
|  | vdev->ndev->name); | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Tx steering disabled", vdev->ndev->name); | 
|  | vdev->config.tx_steering_type = 0; | 
|  | } | 
|  |  | 
|  | if (vdev->config.gro_enable) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Generic receive offload enabled", | 
|  | vdev->ndev->name); | 
|  | } else | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Generic receive offload disabled", | 
|  | vdev->ndev->name); | 
|  |  | 
|  | if (vdev->config.addr_learn_en) | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: MAC Address learning enabled", vdev->ndev->name); | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Rx doorbell mode enabled", vdev->ndev->name); | 
|  |  | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
|  | if (!vxge_bVALn(vpath_mask, i, 1)) | 
|  | continue; | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: MTU size - %d", vdev->ndev->name, | 
|  | ((struct __vxge_hw_device  *)(vdev->devh))-> | 
|  | config.vp_config[i].mtu); | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: VLAN tag stripping %s", vdev->ndev->name, | 
|  | ((struct __vxge_hw_device  *)(vdev->devh))-> | 
|  | config.vp_config[i].rpa_strip_vlan_tag | 
|  | ? "Enabled" : "Disabled"); | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Ring blocks : %d", vdev->ndev->name, | 
|  | ((struct __vxge_hw_device  *)(vdev->devh))-> | 
|  | config.vp_config[i].ring.ring_blocks); | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Fifo blocks : %d", vdev->ndev->name, | 
|  | ((struct __vxge_hw_device  *)(vdev->devh))-> | 
|  | config.vp_config[i].fifo.fifo_blocks); | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: Max frags : %d", vdev->ndev->name, | 
|  | ((struct __vxge_hw_device  *)(vdev->devh))-> | 
|  | config.vp_config[i].fifo.max_frags); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | /** | 
|  | * vxge_pm_suspend - vxge power management suspend entry point | 
|  | * | 
|  | */ | 
|  | static int vxge_pm_suspend(struct pci_dev *pdev, pm_message_t state) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  | /** | 
|  | * vxge_pm_resume - vxge power management resume entry point | 
|  | * | 
|  | */ | 
|  | static int vxge_pm_resume(struct pci_dev *pdev) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * vxge_io_error_detected - called when PCI error is detected | 
|  | * @pdev: Pointer to PCI device | 
|  | * @state: The current pci connection state | 
|  | * | 
|  | * This function is called after a PCI bus error affecting | 
|  | * this device has been detected. | 
|  | */ | 
|  | static pci_ers_result_t vxge_io_error_detected(struct pci_dev *pdev, | 
|  | pci_channel_state_t state) | 
|  | { | 
|  | struct __vxge_hw_device  *hldev = | 
|  | (struct __vxge_hw_device  *) pci_get_drvdata(pdev); | 
|  | struct net_device *netdev = hldev->ndev; | 
|  |  | 
|  | netif_device_detach(netdev); | 
|  |  | 
|  | if (state == pci_channel_io_perm_failure) | 
|  | return PCI_ERS_RESULT_DISCONNECT; | 
|  |  | 
|  | if (netif_running(netdev)) { | 
|  | /* Bring down the card, while avoiding PCI I/O */ | 
|  | do_vxge_close(netdev, 0); | 
|  | } | 
|  |  | 
|  | pci_disable_device(pdev); | 
|  |  | 
|  | return PCI_ERS_RESULT_NEED_RESET; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_io_slot_reset - called after the pci bus has been reset. | 
|  | * @pdev: Pointer to PCI device | 
|  | * | 
|  | * Restart the card from scratch, as if from a cold-boot. | 
|  | * At this point, the card has exprienced a hard reset, | 
|  | * followed by fixups by BIOS, and has its config space | 
|  | * set up identically to what it was at cold boot. | 
|  | */ | 
|  | static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev) | 
|  | { | 
|  | struct __vxge_hw_device  *hldev = | 
|  | (struct __vxge_hw_device  *) pci_get_drvdata(pdev); | 
|  | struct net_device *netdev = hldev->ndev; | 
|  |  | 
|  | struct vxgedev *vdev = netdev_priv(netdev); | 
|  |  | 
|  | if (pci_enable_device(pdev)) { | 
|  | printk(KERN_ERR "%s: " | 
|  | "Cannot re-enable device after reset\n", | 
|  | VXGE_DRIVER_NAME); | 
|  | return PCI_ERS_RESULT_DISCONNECT; | 
|  | } | 
|  |  | 
|  | pci_set_master(pdev); | 
|  | vxge_reset(vdev); | 
|  |  | 
|  | return PCI_ERS_RESULT_RECOVERED; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_io_resume - called when traffic can start flowing again. | 
|  | * @pdev: Pointer to PCI device | 
|  | * | 
|  | * This callback is called when the error recovery driver tells | 
|  | * us that its OK to resume normal operation. | 
|  | */ | 
|  | static void vxge_io_resume(struct pci_dev *pdev) | 
|  | { | 
|  | struct __vxge_hw_device  *hldev = | 
|  | (struct __vxge_hw_device  *) pci_get_drvdata(pdev); | 
|  | struct net_device *netdev = hldev->ndev; | 
|  |  | 
|  | if (netif_running(netdev)) { | 
|  | if (vxge_open(netdev)) { | 
|  | printk(KERN_ERR "%s: " | 
|  | "Can't bring device back up after reset\n", | 
|  | VXGE_DRIVER_NAME); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | netif_device_attach(netdev); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_probe | 
|  | * @pdev : structure containing the PCI related information of the device. | 
|  | * @pre: List of PCI devices supported by the driver listed in vxge_id_table. | 
|  | * Description: | 
|  | * This function is called when a new PCI device gets detected and initializes | 
|  | * it. | 
|  | * Return value: | 
|  | * returns 0 on success and negative on failure. | 
|  | * | 
|  | */ | 
|  | static int __devinit | 
|  | vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre) | 
|  | { | 
|  | struct __vxge_hw_device  *hldev; | 
|  | enum vxge_hw_status status; | 
|  | int ret; | 
|  | int high_dma = 0; | 
|  | u64 vpath_mask = 0; | 
|  | struct vxgedev *vdev; | 
|  | struct vxge_config ll_config; | 
|  | struct vxge_hw_device_config *device_config = NULL; | 
|  | struct vxge_hw_device_attr attr; | 
|  | int i, j, no_of_vpath = 0, max_vpath_supported = 0; | 
|  | u8 *macaddr; | 
|  | struct vxge_mac_addrs *entry; | 
|  | static int bus = -1, device = -1; | 
|  | u8 new_device = 0; | 
|  |  | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
|  | attr.pdev = pdev; | 
|  |  | 
|  | if (bus != pdev->bus->number) | 
|  | new_device = 1; | 
|  | if (device != PCI_SLOT(pdev->devfn)) | 
|  | new_device = 1; | 
|  |  | 
|  | bus = pdev->bus->number; | 
|  | device = PCI_SLOT(pdev->devfn); | 
|  |  | 
|  | if (new_device) { | 
|  | if (driver_config->config_dev_cnt && | 
|  | (driver_config->config_dev_cnt != | 
|  | driver_config->total_dev_cnt)) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Configured %d of %d devices", | 
|  | VXGE_DRIVER_NAME, | 
|  | driver_config->config_dev_cnt, | 
|  | driver_config->total_dev_cnt); | 
|  | driver_config->config_dev_cnt = 0; | 
|  | driver_config->total_dev_cnt = 0; | 
|  | driver_config->g_no_cpus = 0; | 
|  | driver_config->vpath_per_dev = max_config_vpath; | 
|  | } | 
|  |  | 
|  | driver_config->total_dev_cnt++; | 
|  | if (++driver_config->config_dev_cnt > max_config_dev) { | 
|  | ret = 0; | 
|  | goto _exit0; | 
|  | } | 
|  |  | 
|  | device_config = kzalloc(sizeof(struct vxge_hw_device_config), | 
|  | GFP_KERNEL); | 
|  | if (!device_config) { | 
|  | ret = -ENOMEM; | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "device_config : malloc failed %s %d", | 
|  | __FILE__, __LINE__); | 
|  | goto _exit0; | 
|  | } | 
|  |  | 
|  | memset(&ll_config, 0, sizeof(struct vxge_config)); | 
|  | ll_config.tx_steering_type = TX_MULTIQ_STEERING; | 
|  | ll_config.intr_type = MSI_X; | 
|  | ll_config.napi_weight = NEW_NAPI_WEIGHT; | 
|  | ll_config.rth_steering = RTH_STEERING; | 
|  |  | 
|  | /* get the default configuration parameters */ | 
|  | vxge_hw_device_config_default_get(device_config); | 
|  |  | 
|  | /* initialize configuration parameters */ | 
|  | vxge_device_config_init(device_config, &ll_config.intr_type); | 
|  |  | 
|  | ret = pci_enable_device(pdev); | 
|  | if (ret) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s : can not enable PCI device", __func__); | 
|  | goto _exit0; | 
|  | } | 
|  |  | 
|  | if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s : using 64bit DMA", __func__); | 
|  |  | 
|  | high_dma = 1; | 
|  |  | 
|  | if (pci_set_consistent_dma_mask(pdev, | 
|  | 0xffffffffffffffffULL)) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s : unable to obtain 64bit DMA for " | 
|  | "consistent allocations", __func__); | 
|  | ret = -ENOMEM; | 
|  | goto _exit1; | 
|  | } | 
|  | } else if (!pci_set_dma_mask(pdev, 0xffffffffUL)) { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s : using 32bit DMA", __func__); | 
|  | } else { | 
|  | ret = -ENOMEM; | 
|  | goto _exit1; | 
|  | } | 
|  |  | 
|  | if (pci_request_regions(pdev, VXGE_DRIVER_NAME)) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s : request regions failed", __func__); | 
|  | ret = -ENODEV; | 
|  | goto _exit1; | 
|  | } | 
|  |  | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | attr.bar0 = pci_ioremap_bar(pdev, 0); | 
|  | if (!attr.bar0) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s : cannot remap io memory bar0", __func__); | 
|  | ret = -ENODEV; | 
|  | goto _exit2; | 
|  | } | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "pci ioremap bar0: %p:0x%llx", | 
|  | attr.bar0, | 
|  | (unsigned long long)pci_resource_start(pdev, 0)); | 
|  |  | 
|  | status = vxge_hw_device_hw_info_get(attr.bar0, | 
|  | &ll_config.device_hw_info); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Reading of hardware info failed." | 
|  | "Please try upgrading the firmware.", VXGE_DRIVER_NAME); | 
|  | ret = -EINVAL; | 
|  | goto _exit3; | 
|  | } | 
|  |  | 
|  | if (ll_config.device_hw_info.fw_version.major != | 
|  | VXGE_DRIVER_FW_VERSION_MAJOR) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Incorrect firmware version." | 
|  | "Please upgrade the firmware to version 1.x.x", | 
|  | VXGE_DRIVER_NAME); | 
|  | ret = -EINVAL; | 
|  | goto _exit3; | 
|  | } | 
|  |  | 
|  | vpath_mask = ll_config.device_hw_info.vpath_mask; | 
|  | if (vpath_mask == 0) { | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s: No vpaths available in device", VXGE_DRIVER_NAME); | 
|  | ret = -EINVAL; | 
|  | goto _exit3; | 
|  | } | 
|  |  | 
|  | vxge_debug_ll_config(VXGE_TRACE, | 
|  | "%s:%d  Vpath mask = %llx", __func__, __LINE__, | 
|  | (unsigned long long)vpath_mask); | 
|  |  | 
|  | /* Check how many vpaths are available */ | 
|  | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
|  | if (!((vpath_mask) & vxge_mBIT(i))) | 
|  | continue; | 
|  | max_vpath_supported++; | 
|  | } | 
|  |  | 
|  | /* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */ | 
|  | if ((VXGE_HW_FUNCTION_MODE_SRIOV == | 
|  | ll_config.device_hw_info.function_mode) && | 
|  | (max_config_dev > 1) && (pdev->is_physfn)) { | 
|  | ret = pci_enable_sriov(pdev, max_config_dev - 1); | 
|  | if (ret) | 
|  | vxge_debug_ll_config(VXGE_ERR, | 
|  | "Failed to enable SRIOV: %d \n", ret); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Configure vpaths and get driver configured number of vpaths | 
|  | * which is less than or equal to the maximum vpaths per function. | 
|  | */ | 
|  | no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, &ll_config); | 
|  | if (!no_of_vpath) { | 
|  | vxge_debug_ll_config(VXGE_ERR, | 
|  | "%s: No more vpaths to configure", VXGE_DRIVER_NAME); | 
|  | ret = 0; | 
|  | goto _exit3; | 
|  | } | 
|  |  | 
|  | /* Setting driver callbacks */ | 
|  | attr.uld_callbacks.link_up = vxge_callback_link_up; | 
|  | attr.uld_callbacks.link_down = vxge_callback_link_down; | 
|  | attr.uld_callbacks.crit_err = vxge_callback_crit_err; | 
|  |  | 
|  | status = vxge_hw_device_initialize(&hldev, &attr, device_config); | 
|  | if (status != VXGE_HW_OK) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "Failed to initialize device (%d)", status); | 
|  | ret = -EINVAL; | 
|  | goto _exit3; | 
|  | } | 
|  |  | 
|  | vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL); | 
|  |  | 
|  | /* set private device info */ | 
|  | pci_set_drvdata(pdev, hldev); | 
|  |  | 
|  | ll_config.gro_enable = VXGE_GRO_ALWAYS_AGGREGATE; | 
|  | ll_config.fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS; | 
|  | ll_config.addr_learn_en = addr_learn_en; | 
|  | ll_config.rth_algorithm = RTH_ALG_JENKINS; | 
|  | ll_config.rth_hash_type_tcpipv4 = VXGE_HW_RING_HASH_TYPE_TCP_IPV4; | 
|  | ll_config.rth_hash_type_ipv4 = VXGE_HW_RING_HASH_TYPE_NONE; | 
|  | ll_config.rth_hash_type_tcpipv6 = VXGE_HW_RING_HASH_TYPE_NONE; | 
|  | ll_config.rth_hash_type_ipv6 = VXGE_HW_RING_HASH_TYPE_NONE; | 
|  | ll_config.rth_hash_type_tcpipv6ex = VXGE_HW_RING_HASH_TYPE_NONE; | 
|  | ll_config.rth_hash_type_ipv6ex = VXGE_HW_RING_HASH_TYPE_NONE; | 
|  | ll_config.rth_bkt_sz = RTH_BUCKET_SIZE; | 
|  | ll_config.tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE; | 
|  | ll_config.rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE; | 
|  |  | 
|  | if (vxge_device_register(hldev, &ll_config, high_dma, no_of_vpath, | 
|  | &vdev)) { | 
|  | ret = -EINVAL; | 
|  | goto _exit4; | 
|  | } | 
|  |  | 
|  | vxge_hw_device_debug_set(hldev, VXGE_TRACE, VXGE_COMPONENT_LL); | 
|  | VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev), | 
|  | vxge_hw_device_trace_level_get(hldev)); | 
|  |  | 
|  | /* set private HW device info */ | 
|  | hldev->ndev = vdev->ndev; | 
|  | vdev->mtu = VXGE_HW_DEFAULT_MTU; | 
|  | vdev->bar0 = attr.bar0; | 
|  | vdev->max_vpath_supported = max_vpath_supported; | 
|  | vdev->no_of_vpath = no_of_vpath; | 
|  |  | 
|  | /* Virtual Path count */ | 
|  | for (i = 0, j = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
|  | if (!vxge_bVALn(vpath_mask, i, 1)) | 
|  | continue; | 
|  | if (j >= vdev->no_of_vpath) | 
|  | break; | 
|  |  | 
|  | vdev->vpaths[j].is_configured = 1; | 
|  | vdev->vpaths[j].device_id = i; | 
|  | vdev->vpaths[j].fifo.driver_id = j; | 
|  | vdev->vpaths[j].ring.driver_id = j; | 
|  | vdev->vpaths[j].vdev = vdev; | 
|  | vdev->vpaths[j].max_mac_addr_cnt = max_mac_vpath; | 
|  | memcpy((u8 *)vdev->vpaths[j].macaddr, | 
|  | (u8 *)ll_config.device_hw_info.mac_addrs[i], | 
|  | ETH_ALEN); | 
|  |  | 
|  | /* Initialize the mac address list header */ | 
|  | INIT_LIST_HEAD(&vdev->vpaths[j].mac_addr_list); | 
|  |  | 
|  | vdev->vpaths[j].mac_addr_cnt = 0; | 
|  | vdev->vpaths[j].mcast_addr_cnt = 0; | 
|  | j++; | 
|  | } | 
|  | vdev->exec_mode = VXGE_EXEC_MODE_DISABLE; | 
|  | vdev->max_config_port = max_config_port; | 
|  |  | 
|  | vdev->vlan_tag_strip = vlan_tag_strip; | 
|  |  | 
|  | /* map the hashing selector table to the configured vpaths */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | vdev->vpath_selector[i] = vpath_selector[i]; | 
|  |  | 
|  | macaddr = (u8 *)vdev->vpaths[0].macaddr; | 
|  |  | 
|  | ll_config.device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0'; | 
|  | ll_config.device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0'; | 
|  | ll_config.device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0'; | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, "%s: SERIAL NUMBER: %s", | 
|  | vdev->ndev->name, ll_config.device_hw_info.serial_number); | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, "%s: PART NUMBER: %s", | 
|  | vdev->ndev->name, ll_config.device_hw_info.part_number); | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, "%s: Neterion %s Server Adapter", | 
|  | vdev->ndev->name, ll_config.device_hw_info.product_desc); | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: MAC ADDR: %02X:%02X:%02X:%02X:%02X:%02X", | 
|  | vdev->ndev->name, macaddr[0], macaddr[1], macaddr[2], | 
|  | macaddr[3], macaddr[4], macaddr[5]); | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, "%s: Link Width x%d", | 
|  | vdev->ndev->name, vxge_hw_device_link_width_get(hldev)); | 
|  |  | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Firmware version : %s Date : %s", vdev->ndev->name, | 
|  | ll_config.device_hw_info.fw_version.version, | 
|  | ll_config.device_hw_info.fw_date.date); | 
|  |  | 
|  | if (new_device) { | 
|  | switch (ll_config.device_hw_info.function_mode) { | 
|  | case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Single Function Mode Enabled", vdev->ndev->name); | 
|  | break; | 
|  | case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Multi Function Mode Enabled", vdev->ndev->name); | 
|  | break; | 
|  | case VXGE_HW_FUNCTION_MODE_SRIOV: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Single Root IOV Mode Enabled", vdev->ndev->name); | 
|  | break; | 
|  | case VXGE_HW_FUNCTION_MODE_MRIOV: | 
|  | vxge_debug_init(VXGE_TRACE, | 
|  | "%s: Multi Root IOV Mode Enabled", vdev->ndev->name); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | vxge_print_parm(vdev, vpath_mask); | 
|  |  | 
|  | /* Store the fw version for ethttool option */ | 
|  | strcpy(vdev->fw_version, ll_config.device_hw_info.fw_version.version); | 
|  | memcpy(vdev->ndev->dev_addr, (u8 *)vdev->vpaths[0].macaddr, ETH_ALEN); | 
|  | memcpy(vdev->ndev->perm_addr, vdev->ndev->dev_addr, ETH_ALEN); | 
|  |  | 
|  | /* Copy the station mac address to the list */ | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | entry =	(struct vxge_mac_addrs *) | 
|  | kzalloc(sizeof(struct vxge_mac_addrs), | 
|  | GFP_KERNEL); | 
|  | if (NULL == entry) { | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: mac_addr_list : memory allocation failed", | 
|  | vdev->ndev->name); | 
|  | ret = -EPERM; | 
|  | goto _exit5; | 
|  | } | 
|  | macaddr = (u8 *)&entry->macaddr; | 
|  | memcpy(macaddr, vdev->ndev->dev_addr, ETH_ALEN); | 
|  | list_add(&entry->item, &vdev->vpaths[i].mac_addr_list); | 
|  | vdev->vpaths[i].mac_addr_cnt = 1; | 
|  | } | 
|  |  | 
|  | kfree(device_config); | 
|  | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...", | 
|  | vdev->ndev->name, __func__, __LINE__); | 
|  |  | 
|  | vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL); | 
|  | VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev), | 
|  | vxge_hw_device_trace_level_get(hldev)); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | _exit5: | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) | 
|  | vxge_free_mac_add_list(&vdev->vpaths[i]); | 
|  |  | 
|  | vxge_device_unregister(hldev); | 
|  | _exit4: | 
|  | pci_disable_sriov(pdev); | 
|  | vxge_hw_device_terminate(hldev); | 
|  | _exit3: | 
|  | iounmap(attr.bar0); | 
|  | _exit2: | 
|  | pci_release_regions(pdev); | 
|  | _exit1: | 
|  | pci_disable_device(pdev); | 
|  | _exit0: | 
|  | kfree(device_config); | 
|  | driver_config->config_dev_cnt--; | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vxge_rem_nic - Free the PCI device | 
|  | * @pdev: structure containing the PCI related information of the device. | 
|  | * Description: This function is called by the Pci subsystem to release a | 
|  | * PCI device and free up all resource held up by the device. | 
|  | */ | 
|  | static void __devexit | 
|  | vxge_remove(struct pci_dev *pdev) | 
|  | { | 
|  | struct __vxge_hw_device  *hldev; | 
|  | struct vxgedev *vdev = NULL; | 
|  | struct net_device *dev; | 
|  | int i = 0; | 
|  | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | 
|  | (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | 
|  | u32 level_trace; | 
|  | #endif | 
|  |  | 
|  | hldev = (struct __vxge_hw_device  *) pci_get_drvdata(pdev); | 
|  |  | 
|  | if (hldev == NULL) | 
|  | return; | 
|  | dev = hldev->ndev; | 
|  | vdev = netdev_priv(dev); | 
|  |  | 
|  | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | 
|  | (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | 
|  | level_trace = vdev->level_trace; | 
|  | #endif | 
|  | vxge_debug_entryexit(level_trace, | 
|  | "%s:%d", __func__, __LINE__); | 
|  |  | 
|  | vxge_debug_init(level_trace, | 
|  | "%s : removing PCI device...", __func__); | 
|  | vxge_device_unregister(hldev); | 
|  |  | 
|  | for (i = 0; i < vdev->no_of_vpath; i++) { | 
|  | vxge_free_mac_add_list(&vdev->vpaths[i]); | 
|  | vdev->vpaths[i].mcast_addr_cnt = 0; | 
|  | vdev->vpaths[i].mac_addr_cnt = 0; | 
|  | } | 
|  |  | 
|  | kfree(vdev->vpaths); | 
|  |  | 
|  | iounmap(vdev->bar0); | 
|  |  | 
|  | pci_disable_sriov(pdev); | 
|  |  | 
|  | /* we are safe to free it now */ | 
|  | free_netdev(dev); | 
|  |  | 
|  | vxge_debug_init(level_trace, | 
|  | "%s:%d  Device unregistered", __func__, __LINE__); | 
|  |  | 
|  | vxge_hw_device_terminate(hldev); | 
|  |  | 
|  | pci_disable_device(pdev); | 
|  | pci_release_regions(pdev); | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | vxge_debug_entryexit(level_trace, | 
|  | "%s:%d  Exiting...", __func__, __LINE__); | 
|  | } | 
|  |  | 
|  | static struct pci_error_handlers vxge_err_handler = { | 
|  | .error_detected = vxge_io_error_detected, | 
|  | .slot_reset = vxge_io_slot_reset, | 
|  | .resume = vxge_io_resume, | 
|  | }; | 
|  |  | 
|  | static struct pci_driver vxge_driver = { | 
|  | .name = VXGE_DRIVER_NAME, | 
|  | .id_table = vxge_id_table, | 
|  | .probe = vxge_probe, | 
|  | .remove = __devexit_p(vxge_remove), | 
|  | #ifdef CONFIG_PM | 
|  | .suspend = vxge_pm_suspend, | 
|  | .resume = vxge_pm_resume, | 
|  | #endif | 
|  | .err_handler = &vxge_err_handler, | 
|  | }; | 
|  |  | 
|  | static int __init | 
|  | vxge_starter(void) | 
|  | { | 
|  | int ret = 0; | 
|  | char version[32]; | 
|  | snprintf(version, 32, "%s", DRV_VERSION); | 
|  |  | 
|  | printk(KERN_CRIT "%s: Copyright(c) 2002-2009 Neterion Inc\n", | 
|  | VXGE_DRIVER_NAME); | 
|  | printk(KERN_CRIT "%s: Driver version: %s\n", | 
|  | VXGE_DRIVER_NAME, version); | 
|  |  | 
|  | verify_bandwidth(); | 
|  |  | 
|  | driver_config = kzalloc(sizeof(struct vxge_drv_config), GFP_KERNEL); | 
|  | if (!driver_config) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = pci_register_driver(&vxge_driver); | 
|  |  | 
|  | if (driver_config->config_dev_cnt && | 
|  | (driver_config->config_dev_cnt != driver_config->total_dev_cnt)) | 
|  | vxge_debug_init(VXGE_ERR, | 
|  | "%s: Configured %d of %d devices", | 
|  | VXGE_DRIVER_NAME, driver_config->config_dev_cnt, | 
|  | driver_config->total_dev_cnt); | 
|  |  | 
|  | if (ret) | 
|  | kfree(driver_config); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit | 
|  | vxge_closer(void) | 
|  | { | 
|  | pci_unregister_driver(&vxge_driver); | 
|  | kfree(driver_config); | 
|  | } | 
|  | module_init(vxge_starter); | 
|  | module_exit(vxge_closer); |