|  | /* | 
|  | *  linux/arch/arm/common/amba.c | 
|  | * | 
|  | *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/device.h> | 
|  |  | 
|  | #include <asm/io.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/hardware/amba.h> | 
|  | #include <asm/sizes.h> | 
|  |  | 
|  | #define to_amba_device(d)	container_of(d, struct amba_device, dev) | 
|  | #define to_amba_driver(d)	container_of(d, struct amba_driver, drv) | 
|  |  | 
|  | static struct amba_id * | 
|  | amba_lookup(struct amba_id *table, struct amba_device *dev) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | while (table->mask) { | 
|  | ret = (dev->periphid & table->mask) == table->id; | 
|  | if (ret) | 
|  | break; | 
|  | table++; | 
|  | } | 
|  |  | 
|  | return ret ? table : NULL; | 
|  | } | 
|  |  | 
|  | static int amba_match(struct device *dev, struct device_driver *drv) | 
|  | { | 
|  | struct amba_device *pcdev = to_amba_device(dev); | 
|  | struct amba_driver *pcdrv = to_amba_driver(drv); | 
|  |  | 
|  | return amba_lookup(pcdrv->id_table, pcdev) != NULL; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_HOTPLUG | 
|  | static int amba_hotplug(struct device *dev, char **envp, int nr_env, char *buf, int bufsz) | 
|  | { | 
|  | struct amba_device *pcdev = to_amba_device(dev); | 
|  |  | 
|  | if (nr_env < 2) | 
|  | return -ENOMEM; | 
|  |  | 
|  | snprintf(buf, bufsz, "AMBA_ID=%08x", pcdev->periphid); | 
|  | *envp++ = buf; | 
|  | *envp++ = NULL; | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define amba_hotplug NULL | 
|  | #endif | 
|  |  | 
|  | static int amba_suspend(struct device *dev, pm_message_t state) | 
|  | { | 
|  | struct amba_driver *drv = to_amba_driver(dev->driver); | 
|  | int ret = 0; | 
|  |  | 
|  | if (dev->driver && drv->suspend) | 
|  | ret = drv->suspend(to_amba_device(dev), state); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_resume(struct device *dev) | 
|  | { | 
|  | struct amba_driver *drv = to_amba_driver(dev->driver); | 
|  | int ret = 0; | 
|  |  | 
|  | if (dev->driver && drv->resume) | 
|  | ret = drv->resume(to_amba_device(dev)); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Primecells are part of the Advanced Microcontroller Bus Architecture, | 
|  | * so we call the bus "amba". | 
|  | */ | 
|  | static struct bus_type amba_bustype = { | 
|  | .name		= "amba", | 
|  | .match		= amba_match, | 
|  | .hotplug	= amba_hotplug, | 
|  | .suspend	= amba_suspend, | 
|  | .resume		= amba_resume, | 
|  | }; | 
|  |  | 
|  | static int __init amba_init(void) | 
|  | { | 
|  | return bus_register(&amba_bustype); | 
|  | } | 
|  |  | 
|  | postcore_initcall(amba_init); | 
|  |  | 
|  | /* | 
|  | * These are the device model conversion veneers; they convert the | 
|  | * device model structures to our more specific structures. | 
|  | */ | 
|  | static int amba_probe(struct device *dev) | 
|  | { | 
|  | struct amba_device *pcdev = to_amba_device(dev); | 
|  | struct amba_driver *pcdrv = to_amba_driver(dev->driver); | 
|  | struct amba_id *id; | 
|  |  | 
|  | id = amba_lookup(pcdrv->id_table, pcdev); | 
|  |  | 
|  | return pcdrv->probe(pcdev, id); | 
|  | } | 
|  |  | 
|  | static int amba_remove(struct device *dev) | 
|  | { | 
|  | struct amba_driver *drv = to_amba_driver(dev->driver); | 
|  | return drv->remove(to_amba_device(dev)); | 
|  | } | 
|  |  | 
|  | static void amba_shutdown(struct device *dev) | 
|  | { | 
|  | struct amba_driver *drv = to_amba_driver(dev->driver); | 
|  | drv->shutdown(to_amba_device(dev)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_driver_register - register an AMBA device driver | 
|  | *	@drv: amba device driver structure | 
|  | * | 
|  | *	Register an AMBA device driver with the Linux device model | 
|  | *	core.  If devices pre-exist, the drivers probe function will | 
|  | *	be called. | 
|  | */ | 
|  | int amba_driver_register(struct amba_driver *drv) | 
|  | { | 
|  | drv->drv.bus = &amba_bustype; | 
|  |  | 
|  | #define SETFN(fn)	if (drv->fn) drv->drv.fn = amba_##fn | 
|  | SETFN(probe); | 
|  | SETFN(remove); | 
|  | SETFN(shutdown); | 
|  |  | 
|  | return driver_register(&drv->drv); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_driver_unregister - remove an AMBA device driver | 
|  | *	@drv: AMBA device driver structure to remove | 
|  | * | 
|  | *	Unregister an AMBA device driver from the Linux device | 
|  | *	model.  The device model will call the drivers remove function | 
|  | *	for each device the device driver is currently handling. | 
|  | */ | 
|  | void amba_driver_unregister(struct amba_driver *drv) | 
|  | { | 
|  | driver_unregister(&drv->drv); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void amba_device_release(struct device *dev) | 
|  | { | 
|  | struct amba_device *d = to_amba_device(dev); | 
|  |  | 
|  | if (d->res.parent) | 
|  | release_resource(&d->res); | 
|  | kfree(d); | 
|  | } | 
|  |  | 
|  | #define amba_attr(name,fmt,arg...)				\ | 
|  | static ssize_t show_##name(struct device *_dev, struct device_attribute *attr, char *buf)	\ | 
|  | {								\ | 
|  | struct amba_device *dev = to_amba_device(_dev);		\ | 
|  | return sprintf(buf, fmt, arg);				\ | 
|  | }								\ | 
|  | static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL) | 
|  |  | 
|  | amba_attr(id, "%08x\n", dev->periphid); | 
|  | amba_attr(irq0, "%u\n", dev->irq[0]); | 
|  | amba_attr(irq1, "%u\n", dev->irq[1]); | 
|  | amba_attr(resource, "\t%08lx\t%08lx\t%08lx\n", | 
|  | dev->res.start, dev->res.end, dev->res.flags); | 
|  |  | 
|  | /** | 
|  | *	amba_device_register - register an AMBA device | 
|  | *	@dev: AMBA device to register | 
|  | *	@parent: parent memory resource | 
|  | * | 
|  | *	Setup the AMBA device, reading the cell ID if present. | 
|  | *	Claim the resource, and register the AMBA device with | 
|  | *	the Linux device manager. | 
|  | */ | 
|  | int amba_device_register(struct amba_device *dev, struct resource *parent) | 
|  | { | 
|  | u32 pid, cid; | 
|  | void __iomem *tmp; | 
|  | int i, ret; | 
|  |  | 
|  | dev->dev.release = amba_device_release; | 
|  | dev->dev.bus = &amba_bustype; | 
|  | dev->dev.dma_mask = &dev->dma_mask; | 
|  | dev->res.name = dev->dev.bus_id; | 
|  |  | 
|  | if (!dev->dev.coherent_dma_mask && dev->dma_mask) | 
|  | dev_warn(&dev->dev, "coherent dma mask is unset\n"); | 
|  |  | 
|  | ret = request_resource(parent, &dev->res); | 
|  | if (ret == 0) { | 
|  | tmp = ioremap(dev->res.start, SZ_4K); | 
|  | if (!tmp) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | for (pid = 0, i = 0; i < 4; i++) | 
|  | pid |= (readl(tmp + 0xfe0 + 4 * i) & 255) << (i * 8); | 
|  | for (cid = 0, i = 0; i < 4; i++) | 
|  | cid |= (readl(tmp + 0xff0 + 4 * i) & 255) << (i * 8); | 
|  |  | 
|  | iounmap(tmp); | 
|  |  | 
|  | if (cid == 0xb105f00d) | 
|  | dev->periphid = pid; | 
|  |  | 
|  | if (dev->periphid) | 
|  | ret = device_register(&dev->dev); | 
|  | else | 
|  | ret = -ENODEV; | 
|  |  | 
|  | if (ret == 0) { | 
|  | device_create_file(&dev->dev, &dev_attr_id); | 
|  | if (dev->irq[0] != NO_IRQ) | 
|  | device_create_file(&dev->dev, &dev_attr_irq0); | 
|  | if (dev->irq[1] != NO_IRQ) | 
|  | device_create_file(&dev->dev, &dev_attr_irq1); | 
|  | device_create_file(&dev->dev, &dev_attr_resource); | 
|  | } else { | 
|  | out: | 
|  | release_resource(&dev->res); | 
|  | } | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_device_unregister - unregister an AMBA device | 
|  | *	@dev: AMBA device to remove | 
|  | * | 
|  | *	Remove the specified AMBA device from the Linux device | 
|  | *	manager.  All files associated with this object will be | 
|  | *	destroyed, and device drivers notified that the device has | 
|  | *	been removed.  The AMBA device's resources including | 
|  | *	the amba_device structure will be freed once all | 
|  | *	references to it have been dropped. | 
|  | */ | 
|  | void amba_device_unregister(struct amba_device *dev) | 
|  | { | 
|  | device_unregister(&dev->dev); | 
|  | } | 
|  |  | 
|  |  | 
|  | struct find_data { | 
|  | struct amba_device *dev; | 
|  | struct device *parent; | 
|  | const char *busid; | 
|  | unsigned int id; | 
|  | unsigned int mask; | 
|  | }; | 
|  |  | 
|  | static int amba_find_match(struct device *dev, void *data) | 
|  | { | 
|  | struct find_data *d = data; | 
|  | struct amba_device *pcdev = to_amba_device(dev); | 
|  | int r; | 
|  |  | 
|  | r = (pcdev->periphid & d->mask) == d->id; | 
|  | if (d->parent) | 
|  | r &= d->parent == dev->parent; | 
|  | if (d->busid) | 
|  | r &= strcmp(dev->bus_id, d->busid) == 0; | 
|  |  | 
|  | if (r) { | 
|  | get_device(dev); | 
|  | d->dev = pcdev; | 
|  | } | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_find_device - locate an AMBA device given a bus id | 
|  | *	@busid: bus id for device (or NULL) | 
|  | *	@parent: parent device (or NULL) | 
|  | *	@id: peripheral ID (or 0) | 
|  | *	@mask: peripheral ID mask (or 0) | 
|  | * | 
|  | *	Return the AMBA device corresponding to the supplied parameters. | 
|  | *	If no device matches, returns NULL. | 
|  | * | 
|  | *	NOTE: When a valid device is found, its refcount is | 
|  | *	incremented, and must be decremented before the returned | 
|  | *	reference. | 
|  | */ | 
|  | struct amba_device * | 
|  | amba_find_device(const char *busid, struct device *parent, unsigned int id, | 
|  | unsigned int mask) | 
|  | { | 
|  | struct find_data data; | 
|  |  | 
|  | data.dev = NULL; | 
|  | data.parent = parent; | 
|  | data.busid = busid; | 
|  | data.id = id; | 
|  | data.mask = mask; | 
|  |  | 
|  | bus_for_each_dev(&amba_bustype, NULL, &data, amba_find_match); | 
|  |  | 
|  | return data.dev; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_request_regions - request all mem regions associated with device | 
|  | *	@dev: amba_device structure for device | 
|  | *	@name: name, or NULL to use driver name | 
|  | */ | 
|  | int amba_request_regions(struct amba_device *dev, const char *name) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | if (!name) | 
|  | name = dev->dev.driver->name; | 
|  |  | 
|  | if (!request_mem_region(dev->res.start, SZ_4K, name)) | 
|  | ret = -EBUSY; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_release_regions - release mem regions assoicated with device | 
|  | *	@dev: amba_device structure for device | 
|  | * | 
|  | *	Release regions claimed by a successful call to amba_request_regions. | 
|  | */ | 
|  | void amba_release_regions(struct amba_device *dev) | 
|  | { | 
|  | release_mem_region(dev->res.start, SZ_4K); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(amba_driver_register); | 
|  | EXPORT_SYMBOL(amba_driver_unregister); | 
|  | EXPORT_SYMBOL(amba_device_register); | 
|  | EXPORT_SYMBOL(amba_device_unregister); | 
|  | EXPORT_SYMBOL(amba_find_device); | 
|  | EXPORT_SYMBOL(amba_request_regions); | 
|  | EXPORT_SYMBOL(amba_release_regions); |