|  | /* | 
|  | * linux/arch/arm/common/locomo.c | 
|  | * | 
|  | * Sharp LoCoMo support | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This file contains all generic LoCoMo support. | 
|  | * | 
|  | * All initialization functions provided here are intended to be called | 
|  | * from machine specific code with proper arguments when required. | 
|  | * | 
|  | * Based on sa1111.c | 
|  | */ | 
|  |  | 
|  | #include <linux/config.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/spinlock.h> | 
|  |  | 
|  | #include <asm/hardware.h> | 
|  | #include <asm/mach-types.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/mach/irq.h> | 
|  |  | 
|  | #include <asm/hardware/locomo.h> | 
|  |  | 
|  | /* M62332 output channel selection */ | 
|  | #define M62332_EVR_CH	1	/* M62332 volume channel number  */ | 
|  | /*   0 : CH.1 , 1 : CH. 2        */ | 
|  | /* DAC send data */ | 
|  | #define	M62332_SLAVE_ADDR	0x4e	/* Slave address  */ | 
|  | #define	M62332_W_BIT		0x00	/* W bit (0 only) */ | 
|  | #define	M62332_SUB_ADDR		0x00	/* Sub address    */ | 
|  | #define	M62332_A_BIT		0x00	/* A bit (0 only) */ | 
|  |  | 
|  | /* DAC setup and hold times (expressed in us) */ | 
|  | #define DAC_BUS_FREE_TIME	5	/*   4.7 us */ | 
|  | #define DAC_START_SETUP_TIME	5	/*   4.7 us */ | 
|  | #define DAC_STOP_SETUP_TIME	4	/*   4.0 us */ | 
|  | #define DAC_START_HOLD_TIME	5	/*   4.7 us */ | 
|  | #define DAC_SCL_LOW_HOLD_TIME	5	/*   4.7 us */ | 
|  | #define DAC_SCL_HIGH_HOLD_TIME	4	/*   4.0 us */ | 
|  | #define DAC_DATA_SETUP_TIME	1	/*   250 ns */ | 
|  | #define DAC_DATA_HOLD_TIME	1	/*   300 ns */ | 
|  | #define DAC_LOW_SETUP_TIME	1	/*   300 ns */ | 
|  | #define DAC_HIGH_SETUP_TIME	1	/*  1000 ns */ | 
|  |  | 
|  | /* the following is the overall data for the locomo chip */ | 
|  | struct locomo { | 
|  | struct device *dev; | 
|  | unsigned long phys; | 
|  | unsigned int irq; | 
|  | spinlock_t lock; | 
|  | void *base; | 
|  | }; | 
|  |  | 
|  | struct locomo_dev_info { | 
|  | unsigned long	offset; | 
|  | unsigned long	length; | 
|  | unsigned int	devid; | 
|  | unsigned int	irq[1]; | 
|  | const char *	name; | 
|  | }; | 
|  |  | 
|  | /* All the locomo devices.  If offset is non-zero, the mapbase for the | 
|  | * locomo_dev will be set to the chip base plus offset.  If offset is | 
|  | * zero, then the mapbase for the locomo_dev will be set to zero.  An | 
|  | * offset of zero means the device only uses GPIOs or other helper | 
|  | * functions inside this file */ | 
|  | static struct locomo_dev_info locomo_devices[] = { | 
|  | { | 
|  | .devid 		= LOCOMO_DEVID_KEYBOARD, | 
|  | .irq = { | 
|  | IRQ_LOCOMO_KEY, | 
|  | }, | 
|  | .name		= "locomo-keyboard", | 
|  | .offset		= LOCOMO_KEYBOARD, | 
|  | .length		= 16, | 
|  | }, | 
|  | { | 
|  | .devid		= LOCOMO_DEVID_FRONTLIGHT, | 
|  | .irq		= {}, | 
|  | .name		= "locomo-frontlight", | 
|  | .offset		= LOCOMO_FRONTLIGHT, | 
|  | .length		= 8, | 
|  |  | 
|  | }, | 
|  | { | 
|  | .devid		= LOCOMO_DEVID_BACKLIGHT, | 
|  | .irq		= {}, | 
|  | .name		= "locomo-backlight", | 
|  | .offset		= LOCOMO_BACKLIGHT, | 
|  | .length		= 8, | 
|  | }, | 
|  | { | 
|  | .devid		= LOCOMO_DEVID_AUDIO, | 
|  | .irq		= {}, | 
|  | .name		= "locomo-audio", | 
|  | .offset		= LOCOMO_AUDIO, | 
|  | .length		= 4, | 
|  | }, | 
|  | { | 
|  | .devid		= LOCOMO_DEVID_LED, | 
|  | .irq 		= {}, | 
|  | .name		= "locomo-led", | 
|  | .offset		= LOCOMO_LED, | 
|  | .length		= 8, | 
|  | }, | 
|  | { | 
|  | .devid		= LOCOMO_DEVID_UART, | 
|  | .irq		= {}, | 
|  | .name		= "locomo-uart", | 
|  | .offset		= 0, | 
|  | .length		= 0, | 
|  | }, | 
|  | }; | 
|  |  | 
|  |  | 
|  | /** LoCoMo interrupt handling stuff. | 
|  | * NOTE: LoCoMo has a 1 to many mapping on all of its IRQs. | 
|  | * that is, there is only one real hardware interrupt | 
|  | * we determine which interrupt it is by reading some IO memory. | 
|  | * We have two levels of expansion, first in the handler for the | 
|  | * hardware interrupt we generate an interrupt | 
|  | * IRQ_LOCOMO_*_BASE and those handlers generate more interrupts | 
|  | * | 
|  | * hardware irq reads LOCOMO_ICR & 0x0f00 | 
|  | *   IRQ_LOCOMO_KEY_BASE | 
|  | *   IRQ_LOCOMO_GPIO_BASE | 
|  | *   IRQ_LOCOMO_LT_BASE | 
|  | *   IRQ_LOCOMO_SPI_BASE | 
|  | * IRQ_LOCOMO_KEY_BASE reads LOCOMO_KIC & 0x0001 | 
|  | *   IRQ_LOCOMO_KEY | 
|  | * IRQ_LOCOMO_GPIO_BASE reads LOCOMO_GIR & LOCOMO_GPD & 0xffff | 
|  | *   IRQ_LOCOMO_GPIO[0-15] | 
|  | * IRQ_LOCOMO_LT_BASE reads LOCOMO_LTINT & 0x0001 | 
|  | *   IRQ_LOCOMO_LT | 
|  | * IRQ_LOCOMO_SPI_BASE reads LOCOMO_SPIIR & 0x000F | 
|  | *   IRQ_LOCOMO_SPI_RFR | 
|  | *   IRQ_LOCOMO_SPI_RFW | 
|  | *   IRQ_LOCOMO_SPI_OVRN | 
|  | *   IRQ_LOCOMO_SPI_TEND | 
|  | */ | 
|  |  | 
|  | #define LOCOMO_IRQ_START	(IRQ_LOCOMO_KEY_BASE) | 
|  | #define LOCOMO_IRQ_KEY_START	(IRQ_LOCOMO_KEY) | 
|  | #define	LOCOMO_IRQ_GPIO_START	(IRQ_LOCOMO_GPIO0) | 
|  | #define	LOCOMO_IRQ_LT_START	(IRQ_LOCOMO_LT) | 
|  | #define	LOCOMO_IRQ_SPI_START	(IRQ_LOCOMO_SPI_RFR) | 
|  |  | 
|  | static void locomo_handler(unsigned int irq, struct irqdesc *desc, | 
|  | struct pt_regs *regs) | 
|  | { | 
|  | int req, i; | 
|  | struct irqdesc *d; | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  |  | 
|  | /* Acknowledge the parent IRQ */ | 
|  | desc->chip->ack(irq); | 
|  |  | 
|  | /* check why this interrupt was generated */ | 
|  | req = locomo_readl(mapbase + LOCOMO_ICR) & 0x0f00; | 
|  |  | 
|  | if (req) { | 
|  | /* generate the next interrupt(s) */ | 
|  | irq = LOCOMO_IRQ_START; | 
|  | d = irq_desc + irq; | 
|  | for (i = 0; i <= 3; i++, d++, irq++) { | 
|  | if (req & (0x0100 << i)) { | 
|  | d->handle(irq, d, regs); | 
|  | } | 
|  |  | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void locomo_ack_irq(unsigned int irq) | 
|  | { | 
|  | } | 
|  |  | 
|  | static void locomo_mask_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_ICR); | 
|  | r &= ~(0x0010 << (irq - LOCOMO_IRQ_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_ICR); | 
|  | } | 
|  |  | 
|  | static void locomo_unmask_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_ICR); | 
|  | r |= (0x0010 << (irq - LOCOMO_IRQ_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_ICR); | 
|  | } | 
|  |  | 
|  | static struct irqchip locomo_chip = { | 
|  | .ack	= locomo_ack_irq, | 
|  | .mask	= locomo_mask_irq, | 
|  | .unmask	= locomo_unmask_irq, | 
|  | }; | 
|  |  | 
|  | static void locomo_key_handler(unsigned int irq, struct irqdesc *desc, | 
|  | struct pt_regs *regs) | 
|  | { | 
|  | struct irqdesc *d; | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  |  | 
|  | if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) { | 
|  | d = irq_desc + LOCOMO_IRQ_KEY_START; | 
|  | d->handle(LOCOMO_IRQ_KEY_START, d, regs); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void locomo_key_ack_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); | 
|  | r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); | 
|  | } | 
|  |  | 
|  | static void locomo_key_mask_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); | 
|  | r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); | 
|  | } | 
|  |  | 
|  | static void locomo_key_unmask_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); | 
|  | r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); | 
|  | } | 
|  |  | 
|  | static struct irqchip locomo_key_chip = { | 
|  | .ack	= locomo_key_ack_irq, | 
|  | .mask	= locomo_key_mask_irq, | 
|  | .unmask	= locomo_key_unmask_irq, | 
|  | }; | 
|  |  | 
|  | static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc, | 
|  | struct pt_regs *regs) | 
|  | { | 
|  | int req, i; | 
|  | struct irqdesc *d; | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  |  | 
|  | req = 	locomo_readl(mapbase + LOCOMO_GIR) & | 
|  | locomo_readl(mapbase + LOCOMO_GPD) & | 
|  | 0xffff; | 
|  |  | 
|  | if (req) { | 
|  | irq = LOCOMO_IRQ_GPIO_START; | 
|  | d = irq_desc + LOCOMO_IRQ_GPIO_START; | 
|  | for (i = 0; i <= 15; i++, irq++, d++) { | 
|  | if (req & (0x0001 << i)) { | 
|  | d->handle(irq, d, regs); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void locomo_gpio_ack_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_GWE); | 
|  | r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_GWE); | 
|  |  | 
|  | r = locomo_readl(mapbase + LOCOMO_GIS); | 
|  | r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_GIS); | 
|  |  | 
|  | r = locomo_readl(mapbase + LOCOMO_GWE); | 
|  | r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_GWE); | 
|  | } | 
|  |  | 
|  | static void locomo_gpio_mask_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_GIE); | 
|  | r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_GIE); | 
|  | } | 
|  |  | 
|  | static void locomo_gpio_unmask_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_GIE); | 
|  | r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_GIE); | 
|  | } | 
|  |  | 
|  | static struct irqchip locomo_gpio_chip = { | 
|  | .ack	= locomo_gpio_ack_irq, | 
|  | .mask	= locomo_gpio_mask_irq, | 
|  | .unmask	= locomo_gpio_unmask_irq, | 
|  | }; | 
|  |  | 
|  | static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc, | 
|  | struct pt_regs *regs) | 
|  | { | 
|  | struct irqdesc *d; | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  |  | 
|  | if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) { | 
|  | d = irq_desc + LOCOMO_IRQ_LT_START; | 
|  | d->handle(LOCOMO_IRQ_LT_START, d, regs); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void locomo_lt_ack_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_LTINT); | 
|  | r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_LTINT); | 
|  | } | 
|  |  | 
|  | static void locomo_lt_mask_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_LTINT); | 
|  | r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_LTINT); | 
|  | } | 
|  |  | 
|  | static void locomo_lt_unmask_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_LTINT); | 
|  | r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_LTINT); | 
|  | } | 
|  |  | 
|  | static struct irqchip locomo_lt_chip = { | 
|  | .ack	= locomo_lt_ack_irq, | 
|  | .mask	= locomo_lt_mask_irq, | 
|  | .unmask	= locomo_lt_unmask_irq, | 
|  | }; | 
|  |  | 
|  | static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc, | 
|  | struct pt_regs *regs) | 
|  | { | 
|  | int req, i; | 
|  | struct irqdesc *d; | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  |  | 
|  | req = locomo_readl(mapbase + LOCOMO_SPIIR) & 0x000F; | 
|  | if (req) { | 
|  | irq = LOCOMO_IRQ_SPI_START; | 
|  | d = irq_desc + irq; | 
|  |  | 
|  | for (i = 0; i <= 3; i++, irq++, d++) { | 
|  | if (req & (0x0001 << i)) { | 
|  | d->handle(irq, d, regs); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void locomo_spi_ack_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_SPIWE); | 
|  | r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_SPIWE); | 
|  |  | 
|  | r = locomo_readl(mapbase + LOCOMO_SPIIS); | 
|  | r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_SPIIS); | 
|  |  | 
|  | r = locomo_readl(mapbase + LOCOMO_SPIWE); | 
|  | r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_SPIWE); | 
|  | } | 
|  |  | 
|  | static void locomo_spi_mask_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_SPIIE); | 
|  | r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_SPIIE); | 
|  | } | 
|  |  | 
|  | static void locomo_spi_unmask_irq(unsigned int irq) | 
|  | { | 
|  | void *mapbase = get_irq_chipdata(irq); | 
|  | unsigned int r; | 
|  | r = locomo_readl(mapbase + LOCOMO_SPIIE); | 
|  | r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); | 
|  | locomo_writel(r, mapbase + LOCOMO_SPIIE); | 
|  | } | 
|  |  | 
|  | static struct irqchip locomo_spi_chip = { | 
|  | .ack	= locomo_spi_ack_irq, | 
|  | .mask	= locomo_spi_mask_irq, | 
|  | .unmask	= locomo_spi_unmask_irq, | 
|  | }; | 
|  |  | 
|  | static void locomo_setup_irq(struct locomo *lchip) | 
|  | { | 
|  | int irq; | 
|  | void *irqbase = lchip->base; | 
|  |  | 
|  | /* | 
|  | * Install handler for IRQ_LOCOMO_HW. | 
|  | */ | 
|  | set_irq_type(lchip->irq, IRQT_FALLING); | 
|  | set_irq_chipdata(lchip->irq, irqbase); | 
|  | set_irq_chained_handler(lchip->irq, locomo_handler); | 
|  |  | 
|  | /* Install handlers for IRQ_LOCOMO_*_BASE */ | 
|  | set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip); | 
|  | set_irq_chipdata(IRQ_LOCOMO_KEY_BASE, irqbase); | 
|  | set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler); | 
|  | set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE); | 
|  |  | 
|  | set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip); | 
|  | set_irq_chipdata(IRQ_LOCOMO_GPIO_BASE, irqbase); | 
|  | set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler); | 
|  | set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE); | 
|  |  | 
|  | set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip); | 
|  | set_irq_chipdata(IRQ_LOCOMO_LT_BASE, irqbase); | 
|  | set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler); | 
|  | set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE); | 
|  |  | 
|  | set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip); | 
|  | set_irq_chipdata(IRQ_LOCOMO_SPI_BASE, irqbase); | 
|  | set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler); | 
|  | set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE); | 
|  |  | 
|  | /* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */ | 
|  | set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip); | 
|  | set_irq_chipdata(LOCOMO_IRQ_KEY_START, irqbase); | 
|  | set_irq_handler(LOCOMO_IRQ_KEY_START, do_edge_IRQ); | 
|  | set_irq_flags(LOCOMO_IRQ_KEY_START, IRQF_VALID | IRQF_PROBE); | 
|  |  | 
|  | /* install handlers for IRQ_LOCOMO_GPIO_BASE generated interrupts */ | 
|  | for (irq = LOCOMO_IRQ_GPIO_START; irq < LOCOMO_IRQ_GPIO_START + 16; irq++) { | 
|  | set_irq_chip(irq, &locomo_gpio_chip); | 
|  | set_irq_chipdata(irq, irqbase); | 
|  | set_irq_handler(irq, do_edge_IRQ); | 
|  | set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); | 
|  | } | 
|  |  | 
|  | /* install handlers for IRQ_LOCOMO_LT_BASE generated interrupts */ | 
|  | set_irq_chip(LOCOMO_IRQ_LT_START, &locomo_lt_chip); | 
|  | set_irq_chipdata(LOCOMO_IRQ_LT_START, irqbase); | 
|  | set_irq_handler(LOCOMO_IRQ_LT_START, do_edge_IRQ); | 
|  | set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE); | 
|  |  | 
|  | /* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */ | 
|  | for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) { | 
|  | set_irq_chip(irq, &locomo_spi_chip); | 
|  | set_irq_chipdata(irq, irqbase); | 
|  | set_irq_handler(irq, do_edge_IRQ); | 
|  | set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static void locomo_dev_release(struct device *_dev) | 
|  | { | 
|  | struct locomo_dev *dev = LOCOMO_DEV(_dev); | 
|  |  | 
|  | kfree(dev); | 
|  | } | 
|  |  | 
|  | static int | 
|  | locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info) | 
|  | { | 
|  | struct locomo_dev *dev; | 
|  | int ret; | 
|  |  | 
|  | dev = kmalloc(sizeof(struct locomo_dev), GFP_KERNEL); | 
|  | if (!dev) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  | memset(dev, 0, sizeof(struct locomo_dev)); | 
|  |  | 
|  | strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id)); | 
|  | /* | 
|  | * If the parent device has a DMA mask associated with it, | 
|  | * propagate it down to the children. | 
|  | */ | 
|  | if (lchip->dev->dma_mask) { | 
|  | dev->dma_mask = *lchip->dev->dma_mask; | 
|  | dev->dev.dma_mask = &dev->dma_mask; | 
|  | } | 
|  |  | 
|  | dev->devid	 = info->devid; | 
|  | dev->dev.parent  = lchip->dev; | 
|  | dev->dev.bus     = &locomo_bus_type; | 
|  | dev->dev.release = locomo_dev_release; | 
|  | dev->dev.coherent_dma_mask = lchip->dev->coherent_dma_mask; | 
|  |  | 
|  | if (info->offset) | 
|  | dev->mapbase = lchip->base + info->offset; | 
|  | else | 
|  | dev->mapbase = 0; | 
|  | dev->length = info->length; | 
|  |  | 
|  | memmove(dev->irq, info->irq, sizeof(dev->irq)); | 
|  |  | 
|  | ret = device_register(&dev->dev); | 
|  | if (ret) { | 
|  | out: | 
|  | kfree(dev); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	locomo_probe - probe for a single LoCoMo chip. | 
|  | *	@phys_addr: physical address of device. | 
|  | * | 
|  | *	Probe for a LoCoMo chip.  This must be called | 
|  | *	before any other locomo-specific code. | 
|  | * | 
|  | *	Returns: | 
|  | *	%-ENODEV	device not found. | 
|  | *	%-EBUSY		physical address already marked in-use. | 
|  | *	%0		successful. | 
|  | */ | 
|  | static int | 
|  | __locomo_probe(struct device *me, struct resource *mem, int irq) | 
|  | { | 
|  | struct locomo *lchip; | 
|  | unsigned long r; | 
|  | int i, ret = -ENODEV; | 
|  |  | 
|  | lchip = kmalloc(sizeof(struct locomo), GFP_KERNEL); | 
|  | if (!lchip) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memset(lchip, 0, sizeof(struct locomo)); | 
|  |  | 
|  | spin_lock_init(&lchip->lock); | 
|  |  | 
|  | lchip->dev = me; | 
|  | dev_set_drvdata(lchip->dev, lchip); | 
|  |  | 
|  | lchip->phys = mem->start; | 
|  | lchip->irq = irq; | 
|  |  | 
|  | /* | 
|  | * Map the whole region.  This also maps the | 
|  | * registers for our children. | 
|  | */ | 
|  | lchip->base = ioremap(mem->start, PAGE_SIZE); | 
|  | if (!lchip->base) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* locomo initialize */ | 
|  | locomo_writel(0, lchip->base + LOCOMO_ICR); | 
|  | /* KEYBOARD */ | 
|  | locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC); | 
|  |  | 
|  | /* GPIO */ | 
|  | locomo_writel(0, lchip->base + LOCOMO_GPO); | 
|  | locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14)) | 
|  | , lchip->base + LOCOMO_GPE); | 
|  | locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14)) | 
|  | , lchip->base + LOCOMO_GPD); | 
|  | locomo_writel(0, lchip->base + LOCOMO_GIE); | 
|  |  | 
|  | /* FrontLight */ | 
|  | locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); | 
|  | locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); | 
|  | /* Longtime timer */ | 
|  | locomo_writel(0, lchip->base + LOCOMO_LTINT); | 
|  | /* SPI */ | 
|  | locomo_writel(0, lchip->base + LOCOMO_SPIIE); | 
|  |  | 
|  | locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD); | 
|  | r = locomo_readl(lchip->base + LOCOMO_ASD); | 
|  | r |= 0x8000; | 
|  | locomo_writel(r, lchip->base + LOCOMO_ASD); | 
|  |  | 
|  | locomo_writel(6 + 8 + 320 + 30 - 10 - 128 + 4, lchip->base + LOCOMO_HSD); | 
|  | r = locomo_readl(lchip->base + LOCOMO_HSD); | 
|  | r |= 0x8000; | 
|  | locomo_writel(r, lchip->base + LOCOMO_HSD); | 
|  |  | 
|  | locomo_writel(128 / 8, lchip->base + LOCOMO_HSC); | 
|  |  | 
|  | /* XON */ | 
|  | locomo_writel(0x80, lchip->base + LOCOMO_TADC); | 
|  | udelay(1000); | 
|  | /* CLK9MEN */ | 
|  | r = locomo_readl(lchip->base + LOCOMO_TADC); | 
|  | r |= 0x10; | 
|  | locomo_writel(r, lchip->base + LOCOMO_TADC); | 
|  | udelay(100); | 
|  |  | 
|  | /* init DAC */ | 
|  | r = locomo_readl(lchip->base + LOCOMO_DAC); | 
|  | r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB; | 
|  | locomo_writel(r, lchip->base + LOCOMO_DAC); | 
|  |  | 
|  | r = locomo_readl(lchip->base + LOCOMO_VER); | 
|  | printk(KERN_INFO "LoCoMo Chip: %lu%lu\n", (r >> 8), (r & 0xff)); | 
|  |  | 
|  | /* | 
|  | * The interrupt controller must be initialised before any | 
|  | * other device to ensure that the interrupts are available. | 
|  | */ | 
|  | if (lchip->irq != NO_IRQ) | 
|  | locomo_setup_irq(lchip); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(locomo_devices); i++) | 
|  | locomo_init_one_child(lchip, &locomo_devices[i]); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out: | 
|  | kfree(lchip); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __locomo_remove(struct locomo *lchip) | 
|  | { | 
|  | struct list_head *l, *n; | 
|  |  | 
|  | list_for_each_safe(l, n, &lchip->dev->children) { | 
|  | struct device *d = list_to_dev(l); | 
|  |  | 
|  | device_unregister(d); | 
|  | } | 
|  |  | 
|  | if (lchip->irq != NO_IRQ) { | 
|  | set_irq_chained_handler(lchip->irq, NULL); | 
|  | set_irq_data(lchip->irq, NULL); | 
|  | } | 
|  |  | 
|  | iounmap(lchip->base); | 
|  | kfree(lchip); | 
|  | } | 
|  |  | 
|  | static int locomo_probe(struct device *dev) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct resource *mem; | 
|  | int irq; | 
|  |  | 
|  | mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!mem) | 
|  | return -EINVAL; | 
|  | irq = platform_get_irq(pdev, 0); | 
|  |  | 
|  | return __locomo_probe(dev, mem, irq); | 
|  | } | 
|  |  | 
|  | static int locomo_remove(struct device *dev) | 
|  | { | 
|  | struct locomo *lchip = dev_get_drvdata(dev); | 
|  |  | 
|  | if (lchip) { | 
|  | __locomo_remove(lchip); | 
|  | dev_set_drvdata(dev, NULL); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	Not sure if this should be on the system bus or not yet. | 
|  | *	We really want some way to register a system device at | 
|  | *	the per-machine level, and then have this driver pick | 
|  | *	up the registered devices. | 
|  | */ | 
|  | static struct device_driver locomo_device_driver = { | 
|  | .name		= "locomo", | 
|  | .bus		= &platform_bus_type, | 
|  | .probe		= locomo_probe, | 
|  | .remove		= locomo_remove, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *	Get the parent device driver (us) structure | 
|  | *	from a child function device | 
|  | */ | 
|  | static inline struct locomo *locomo_chip_driver(struct locomo_dev *ldev) | 
|  | { | 
|  | return (struct locomo *)dev_get_drvdata(ldev->dev.parent); | 
|  | } | 
|  |  | 
|  | void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir) | 
|  | { | 
|  | struct locomo *lchip = locomo_chip_driver(ldev); | 
|  | unsigned long flags; | 
|  | unsigned int r; | 
|  |  | 
|  | spin_lock_irqsave(&lchip->lock, flags); | 
|  |  | 
|  | r = locomo_readl(lchip->base + LOCOMO_GPD); | 
|  | r &= ~bits; | 
|  | locomo_writel(r, lchip->base + LOCOMO_GPD); | 
|  |  | 
|  | r = locomo_readl(lchip->base + LOCOMO_GPE); | 
|  | if (dir) | 
|  | r |= bits; | 
|  | else | 
|  | r &= ~bits; | 
|  | locomo_writel(r, lchip->base + LOCOMO_GPE); | 
|  |  | 
|  | spin_unlock_irqrestore(&lchip->lock, flags); | 
|  | } | 
|  |  | 
|  | unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits) | 
|  | { | 
|  | struct locomo *lchip = locomo_chip_driver(ldev); | 
|  | unsigned long flags; | 
|  | unsigned int ret; | 
|  |  | 
|  | spin_lock_irqsave(&lchip->lock, flags); | 
|  | ret = locomo_readl(lchip->base + LOCOMO_GPL); | 
|  | spin_unlock_irqrestore(&lchip->lock, flags); | 
|  |  | 
|  | ret &= bits; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits) | 
|  | { | 
|  | struct locomo *lchip = locomo_chip_driver(ldev); | 
|  | unsigned long flags; | 
|  | unsigned int ret; | 
|  |  | 
|  | spin_lock_irqsave(&lchip->lock, flags); | 
|  | ret = locomo_readl(lchip->base + LOCOMO_GPO); | 
|  | spin_unlock_irqrestore(&lchip->lock, flags); | 
|  |  | 
|  | ret &= bits; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set) | 
|  | { | 
|  | struct locomo *lchip = locomo_chip_driver(ldev); | 
|  | unsigned long flags; | 
|  | unsigned int r; | 
|  |  | 
|  | spin_lock_irqsave(&lchip->lock, flags); | 
|  |  | 
|  | r = locomo_readl(lchip->base + LOCOMO_GPO); | 
|  | if (set) | 
|  | r |= bits; | 
|  | else | 
|  | r &= ~bits; | 
|  | locomo_writel(r, lchip->base + LOCOMO_GPO); | 
|  |  | 
|  | spin_unlock_irqrestore(&lchip->lock, flags); | 
|  | } | 
|  |  | 
|  | static void locomo_m62332_sendbit(void *mapbase, int bit) | 
|  | { | 
|  | unsigned int r; | 
|  |  | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r &=  ~(LOCOMO_DAC_SCLOEB); | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */ | 
|  | udelay(DAC_DATA_HOLD_TIME);	/* 300 nsec */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r &=  ~(LOCOMO_DAC_SCLOEB); | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */ | 
|  | udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */ | 
|  |  | 
|  | if (bit & 1) { | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r |=  LOCOMO_DAC_SDAOEB; | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */ | 
|  | } else { | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r &=  ~(LOCOMO_DAC_SDAOEB); | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */ | 
|  | } | 
|  |  | 
|  | udelay(DAC_DATA_SETUP_TIME);	/* 250 nsec */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r |=  LOCOMO_DAC_SCLOEB; | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */ | 
|  | udelay(DAC_SCL_HIGH_HOLD_TIME);	/*  4.0 usec */ | 
|  | } | 
|  |  | 
|  | void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel) | 
|  | { | 
|  | struct locomo *lchip = locomo_chip_driver(ldev); | 
|  | int i; | 
|  | unsigned char data; | 
|  | unsigned int r; | 
|  | void *mapbase = lchip->base; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&lchip->lock, flags); | 
|  |  | 
|  | /* Start */ | 
|  | udelay(DAC_BUS_FREE_TIME);	/* 5.0 usec */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r |=  LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB; | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */ | 
|  | udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.0 usec */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r &=  ~(LOCOMO_DAC_SDAOEB); | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_START_HOLD_TIME);	/* 5.0 usec */ | 
|  | udelay(DAC_DATA_HOLD_TIME);	/* 300 nsec */ | 
|  |  | 
|  | /* Send slave address and W bit (LSB is W bit) */ | 
|  | data = (M62332_SLAVE_ADDR << 1) | M62332_W_BIT; | 
|  | for (i = 1; i <= 8; i++) { | 
|  | locomo_m62332_sendbit(mapbase, data >> (8 - i)); | 
|  | } | 
|  |  | 
|  | /* Check A bit */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r &=  ~(LOCOMO_DAC_SCLOEB); | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */ | 
|  | udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r &=  ~(LOCOMO_DAC_SDAOEB); | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r |=  LOCOMO_DAC_SCLOEB; | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */ | 
|  | udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */ | 
|  | if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */ | 
|  | printk(KERN_WARNING "locomo: m62332_senddata Error 1\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Send Sub address (LSB is channel select) */ | 
|  | /*    channel = 0 : ch1 select              */ | 
|  | /*            = 1 : ch2 select              */ | 
|  | data = M62332_SUB_ADDR + channel; | 
|  | for (i = 1; i <= 8; i++) { | 
|  | locomo_m62332_sendbit(mapbase, data >> (8 - i)); | 
|  | } | 
|  |  | 
|  | /* Check A bit */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r &=  ~(LOCOMO_DAC_SCLOEB); | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */ | 
|  | udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r &=  ~(LOCOMO_DAC_SDAOEB); | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r |=  LOCOMO_DAC_SCLOEB; | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */ | 
|  | udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */ | 
|  | if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */ | 
|  | printk(KERN_WARNING "locomo: m62332_senddata Error 2\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Send DAC data */ | 
|  | for (i = 1; i <= 8; i++) { | 
|  | locomo_m62332_sendbit(mapbase, dac_data >> (8 - i)); | 
|  | } | 
|  |  | 
|  | /* Check A bit */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r &=  ~(LOCOMO_DAC_SCLOEB); | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */ | 
|  | udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r &=  ~(LOCOMO_DAC_SDAOEB); | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r |=  LOCOMO_DAC_SCLOEB; | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */ | 
|  | udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */ | 
|  | if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */ | 
|  | printk(KERN_WARNING "locomo: m62332_senddata Error 3\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* stop */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r &=  ~(LOCOMO_DAC_SCLOEB); | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */ | 
|  | udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r |=  LOCOMO_DAC_SCLOEB; | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */ | 
|  | udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4 usec */ | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r |=  LOCOMO_DAC_SDAOEB; | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */ | 
|  | udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4 usec */ | 
|  |  | 
|  | r = locomo_readl(mapbase + LOCOMO_DAC); | 
|  | r |=  LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB; | 
|  | locomo_writel(r, mapbase + LOCOMO_DAC); | 
|  | udelay(DAC_LOW_SETUP_TIME);	/* 1000 nsec */ | 
|  | udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */ | 
|  |  | 
|  | spin_unlock_irqrestore(&lchip->lock, flags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	LoCoMo "Register Access Bus." | 
|  | * | 
|  | *	We model this as a regular bus type, and hang devices directly | 
|  | *	off this. | 
|  | */ | 
|  | static int locomo_match(struct device *_dev, struct device_driver *_drv) | 
|  | { | 
|  | struct locomo_dev *dev = LOCOMO_DEV(_dev); | 
|  | struct locomo_driver *drv = LOCOMO_DRV(_drv); | 
|  |  | 
|  | return dev->devid == drv->devid; | 
|  | } | 
|  |  | 
|  | static int locomo_bus_suspend(struct device *dev, pm_message_t state) | 
|  | { | 
|  | struct locomo_dev *ldev = LOCOMO_DEV(dev); | 
|  | struct locomo_driver *drv = LOCOMO_DRV(dev->driver); | 
|  | int ret = 0; | 
|  |  | 
|  | if (drv && drv->suspend) | 
|  | ret = drv->suspend(ldev, state); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int locomo_bus_resume(struct device *dev) | 
|  | { | 
|  | struct locomo_dev *ldev = LOCOMO_DEV(dev); | 
|  | struct locomo_driver *drv = LOCOMO_DRV(dev->driver); | 
|  | int ret = 0; | 
|  |  | 
|  | if (drv && drv->resume) | 
|  | ret = drv->resume(ldev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int locomo_bus_probe(struct device *dev) | 
|  | { | 
|  | struct locomo_dev *ldev = LOCOMO_DEV(dev); | 
|  | struct locomo_driver *drv = LOCOMO_DRV(dev->driver); | 
|  | int ret = -ENODEV; | 
|  |  | 
|  | if (drv->probe) | 
|  | ret = drv->probe(ldev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int locomo_bus_remove(struct device *dev) | 
|  | { | 
|  | struct locomo_dev *ldev = LOCOMO_DEV(dev); | 
|  | struct locomo_driver *drv = LOCOMO_DRV(dev->driver); | 
|  | int ret = 0; | 
|  |  | 
|  | if (drv->remove) | 
|  | ret = drv->remove(ldev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | struct bus_type locomo_bus_type = { | 
|  | .name		= "locomo-bus", | 
|  | .match		= locomo_match, | 
|  | .suspend	= locomo_bus_suspend, | 
|  | .resume		= locomo_bus_resume, | 
|  | }; | 
|  |  | 
|  | int locomo_driver_register(struct locomo_driver *driver) | 
|  | { | 
|  | driver->drv.probe = locomo_bus_probe; | 
|  | driver->drv.remove = locomo_bus_remove; | 
|  | driver->drv.bus = &locomo_bus_type; | 
|  | return driver_register(&driver->drv); | 
|  | } | 
|  |  | 
|  | void locomo_driver_unregister(struct locomo_driver *driver) | 
|  | { | 
|  | driver_unregister(&driver->drv); | 
|  | } | 
|  |  | 
|  | static int __init locomo_init(void) | 
|  | { | 
|  | int ret = bus_register(&locomo_bus_type); | 
|  | if (ret == 0) | 
|  | driver_register(&locomo_device_driver); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit locomo_exit(void) | 
|  | { | 
|  | driver_unregister(&locomo_device_driver); | 
|  | bus_unregister(&locomo_bus_type); | 
|  | } | 
|  |  | 
|  | module_init(locomo_init); | 
|  | module_exit(locomo_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("Sharp LoCoMo core driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>"); | 
|  |  | 
|  | EXPORT_SYMBOL(locomo_driver_register); | 
|  | EXPORT_SYMBOL(locomo_driver_unregister); | 
|  | EXPORT_SYMBOL(locomo_gpio_set_dir); | 
|  | EXPORT_SYMBOL(locomo_gpio_read_level); | 
|  | EXPORT_SYMBOL(locomo_gpio_read_output); | 
|  | EXPORT_SYMBOL(locomo_gpio_write); | 
|  | EXPORT_SYMBOL(locomo_m62332_senddata); |