| if ARCH_OMAP |
| |
| menu "TI OMAP Implementations" |
| |
| comment "OMAP Core Type" |
| |
| config ARCH_OMAP730 |
| depends on ARCH_OMAP |
| bool "OMAP730 Based System" |
| select ARCH_OMAP_OTG |
| |
| config ARCH_OMAP1510 |
| depends on ARCH_OMAP |
| default y |
| bool "OMAP1510 Based System" |
| |
| config ARCH_OMAP16XX |
| depends on ARCH_OMAP |
| bool "OMAP16XX Based System" |
| select ARCH_OMAP_OTG |
| |
| config ARCH_OMAP_OTG |
| bool |
| |
| comment "OMAP Board Type" |
| |
| config MACH_OMAP_INNOVATOR |
| bool "TI Innovator" |
| depends on ARCH_OMAP1510 || ARCH_OMAP16XX |
| help |
| TI OMAP 1510 or 1610 Innovator board support. Say Y here if you |
| have such a board. |
| |
| config MACH_OMAP_H2 |
| bool "TI H2 Support" |
| depends on ARCH_OMAP16XX |
| help |
| TI OMAP 1610/1611B H2 board support. Say Y here if you have such |
| a board. |
| |
| config MACH_OMAP_H3 |
| bool "TI H3 Support" |
| depends on ARCH_OMAP16XX |
| help |
| TI OMAP 1710 H3 board support. Say Y here if you have such |
| a board. |
| |
| config MACH_OMAP_H4 |
| bool "TI H4 Support" |
| depends on ARCH_OMAP16XX |
| help |
| TI OMAP 1610 H4 board support. Say Y here if you have such |
| a board. |
| |
| config MACH_OMAP_OSK |
| bool "TI OSK Support" |
| depends on ARCH_OMAP16XX |
| help |
| TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here |
| if you have such a board. |
| |
| config MACH_OMAP_PERSEUS2 |
| bool "TI Perseus2" |
| depends on ARCH_OMAP730 |
| help |
| Support for TI OMAP 730 Perseus2 board. Say Y here if you have such |
| a board. |
| |
| config MACH_VOICEBLUE |
| bool "Voiceblue" |
| depends on ARCH_OMAP1510 |
| help |
| Support for Voiceblue GSM/VoIP gateway. Say Y here if you have such |
| board. |
| |
| config MACH_NETSTAR |
| bool "NetStar" |
| depends on ARCH_OMAP1510 |
| help |
| Support for NetStar PBX. Say Y here if you have such a board. |
| |
| config MACH_OMAP_GENERIC |
| bool "Generic OMAP board" |
| depends on ARCH_OMAP1510 || ARCH_OMAP16XX |
| help |
| Support for generic OMAP-1510, 1610 or 1710 board with |
| no FPGA. Can be used as template for porting Linux to |
| custom OMAP boards. Say Y here if you have a custom |
| board. |
| |
| comment "OMAP Feature Selections" |
| |
| #config OMAP_BOOT_TAG |
| # bool "OMAP bootloader information passing" |
| # depends on ARCH_OMAP |
| # default n |
| # help |
| # Say Y, if you have a bootloader which passes information |
| # about your board and its peripheral configuration. |
| |
| config OMAP_MUX |
| bool "OMAP multiplexing support" |
| depends on ARCH_OMAP |
| default y |
| help |
| Pin multiplexing support for OMAP boards. If your bootloader |
| sets the multiplexing correctly, say N. Otherwise, or if unsure, |
| say Y. |
| |
| config OMAP_MUX_DEBUG |
| bool "Multiplexing debug output" |
| depends on OMAP_MUX |
| default n |
| help |
| Makes the multiplexing functions print out a lot of debug info. |
| This is useful if you want to find out the correct values of the |
| multiplexing registers. |
| |
| config OMAP_MUX_WARNINGS |
| bool "Warn about pins the bootloader didn't set up" |
| depends on OMAP_MUX |
| default y |
| help |
| Choose Y here to warn whenever driver initialization logic needs |
| to change the pin multiplexing setup. When there are no warnings |
| printed, it's safe to deselect OMAP_MUX for your product. |
| |
| choice |
| prompt "System timer" |
| default OMAP_MPU_TIMER |
| |
| config OMAP_MPU_TIMER |
| bool "Use mpu timer" |
| help |
| Select this option if you want to use the OMAP mpu timer. This |
| timer provides more intra-tick resolution than the 32KHz timer, |
| but consumes more power. |
| |
| config OMAP_32K_TIMER |
| bool "Use 32KHz timer" |
| depends on ARCH_OMAP16XX |
| help |
| Select this option if you want to enable the OMAP 32KHz timer. |
| This timer saves power compared to the OMAP_MPU_TIMER, and has |
| support for no tick during idle. The 32KHz timer provides less |
| intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is |
| currently only available for OMAP-16xx. |
| |
| endchoice |
| |
| config OMAP_32K_TIMER_HZ |
| int "Kernel internal timer frequency for 32KHz timer" |
| range 32 1024 |
| depends on OMAP_32K_TIMER |
| default "128" |
| help |
| Kernel internal timer frequency should be a divisor of 32768, |
| such as 64 or 128. |
| |
| choice |
| prompt "Low-level debug console UART" |
| depends on ARCH_OMAP |
| default OMAP_LL_DEBUG_UART1 |
| |
| config OMAP_LL_DEBUG_UART1 |
| bool "UART1" |
| |
| config OMAP_LL_DEBUG_UART2 |
| bool "UART2" |
| |
| config OMAP_LL_DEBUG_UART3 |
| bool "UART3" |
| |
| endchoice |
| |
| config OMAP_ARM_195MHZ |
| bool "OMAP ARM 195 MHz CPU" |
| depends on ARCH_OMAP730 |
| help |
| Enable 195MHz clock for OMAP CPU. If unsure, say N. |
| |
| config OMAP_ARM_192MHZ |
| bool "OMAP ARM 192 MHz CPU" |
| depends on ARCH_OMAP16XX |
| help |
| Enable 192MHz clock for OMAP CPU. If unsure, say N. |
| |
| config OMAP_ARM_182MHZ |
| bool "OMAP ARM 182 MHz CPU" |
| depends on ARCH_OMAP730 |
| help |
| Enable 182MHz clock for OMAP CPU. If unsure, say N. |
| |
| config OMAP_ARM_168MHZ |
| bool "OMAP ARM 168 MHz CPU" |
| depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730 |
| help |
| Enable 168MHz clock for OMAP CPU. If unsure, say N. |
| |
| config OMAP_ARM_120MHZ |
| bool "OMAP ARM 120 MHz CPU" |
| depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730 |
| help |
| Enable 120MHz clock for OMAP CPU. If unsure, say N. |
| |
| config OMAP_ARM_60MHZ |
| bool "OMAP ARM 60 MHz CPU" |
| depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730 |
| default y |
| help |
| Enable 60MHz clock for OMAP CPU. If unsure, say Y. |
| |
| config OMAP_ARM_30MHZ |
| bool "OMAP ARM 30 MHz CPU" |
| depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730 |
| help |
| Enable 30MHz clock for OMAP CPU. If unsure, say N. |
| |
| endmenu |
| |
| endif |