|  | /* | 
|  | *  linux/arch/arm/mach-versatile/pci.c | 
|  | * | 
|  | * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved. | 
|  | * You can redistribute and/or modify this software under the terms of version 2 | 
|  | * of the GNU General Public License as published by the Free Software Foundation. | 
|  | * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED | 
|  | * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software. | 
|  | * | 
|  | * ARM Versatile PCI driver. | 
|  | * | 
|  | * 14/04/2005 Initial version, colin.king@philips.com | 
|  | * | 
|  | */ | 
|  | #include <linux/config.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/init.h> | 
|  |  | 
|  | #include <asm/hardware.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/system.h> | 
|  | #include <asm/mach/pci.h> | 
|  | #include <asm/mach-types.h> | 
|  |  | 
|  | /* | 
|  | * these spaces are mapped using the following base registers: | 
|  | * | 
|  | * Usage Local Bus Memory         Base/Map registers used | 
|  | * | 
|  | * Mem   50000000 - 5FFFFFFF      LB_BASE0/LB_MAP0,  non prefetch | 
|  | * Mem   60000000 - 6FFFFFFF      LB_BASE1/LB_MAP1,  prefetch | 
|  | * IO    44000000 - 4FFFFFFF      LB_BASE2/LB_MAP2,  IO | 
|  | * Cfg   42000000 - 42FFFFFF	  PCI config | 
|  | * | 
|  | */ | 
|  | #define SYS_PCICTL			IO_ADDRESS(VERSATILE_SYS_PCICTL) | 
|  | #define PCI_IMAP0			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0) | 
|  | #define PCI_IMAP1			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4) | 
|  | #define PCI_IMAP2			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8) | 
|  | #define PCI_SMAP0			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10) | 
|  | #define PCI_SMAP1			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14) | 
|  | #define PCI_SMAP2			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18) | 
|  | #define PCI_SELFID			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc) | 
|  |  | 
|  | #define DEVICE_ID_OFFSET		0x00 | 
|  | #define CSR_OFFSET			0x04 | 
|  | #define CLASS_ID_OFFSET			0x08 | 
|  |  | 
|  | #define VP_PCI_DEVICE_ID		0x030010ee | 
|  | #define VP_PCI_CLASS_ID			0x0b400000 | 
|  |  | 
|  | static unsigned long pci_slot_ignore = 0; | 
|  |  | 
|  | static int __init versatile_pci_slot_ignore(char *str) | 
|  | { | 
|  | int retval; | 
|  | int slot; | 
|  |  | 
|  | while ((retval = get_option(&str,&slot))) { | 
|  | if ((slot < 0) || (slot > 31)) { | 
|  | printk("Illegal slot value: %d\n",slot); | 
|  | } else { | 
|  | pci_slot_ignore |= (1 << slot); | 
|  | } | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | __setup("pci_slot_ignore=", versatile_pci_slot_ignore); | 
|  |  | 
|  |  | 
|  | static unsigned long __pci_addr(struct pci_bus *bus, | 
|  | unsigned int devfn, int offset) | 
|  | { | 
|  | unsigned int busnr = bus->number; | 
|  |  | 
|  | /* | 
|  | * Trap out illegal values | 
|  | */ | 
|  | if (offset > 255) | 
|  | BUG(); | 
|  | if (busnr > 255) | 
|  | BUG(); | 
|  | if (devfn > 255) | 
|  | BUG(); | 
|  |  | 
|  | return (VERSATILE_PCI_CFG_VIRT_BASE | (busnr << 16) | | 
|  | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset); | 
|  | } | 
|  |  | 
|  | static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where, | 
|  | int size, u32 *val) | 
|  | { | 
|  | unsigned long addr = __pci_addr(bus, devfn, where); | 
|  | u32 v; | 
|  | int slot = PCI_SLOT(devfn); | 
|  |  | 
|  | if (pci_slot_ignore & (1 << slot)) { | 
|  | /* Ignore this slot */ | 
|  | switch (size) { | 
|  | case 1: | 
|  | v = 0xff; | 
|  | break; | 
|  | case 2: | 
|  | v = 0xffff; | 
|  | break; | 
|  | default: | 
|  | v = 0xffffffff; | 
|  | } | 
|  | } else { | 
|  | switch (size) { | 
|  | case 1: | 
|  | addr &= ~3; | 
|  | v = __raw_readb(addr); | 
|  | break; | 
|  |  | 
|  | case 2: | 
|  | v = __raw_readl(addr & ~3); | 
|  | if (addr & 2) v >>= 16; | 
|  | v &= 0xffff; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | addr &= ~3; | 
|  | v = __raw_readl(addr); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | *val = v; | 
|  | return PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where, | 
|  | int size, u32 val) | 
|  | { | 
|  | unsigned long addr = __pci_addr(bus, devfn, where); | 
|  | int slot = PCI_SLOT(devfn); | 
|  |  | 
|  | if (pci_slot_ignore & (1 << slot)) { | 
|  | return PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | switch (size) { | 
|  | case 1: | 
|  | __raw_writeb((u8)val, addr); | 
|  | break; | 
|  |  | 
|  | case 2: | 
|  | __raw_writew((u16)val, addr); | 
|  | break; | 
|  |  | 
|  | case 4: | 
|  | __raw_writel(val, addr); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | static struct pci_ops pci_versatile_ops = { | 
|  | .read	= versatile_read_config, | 
|  | .write	= versatile_write_config, | 
|  | }; | 
|  |  | 
|  | static struct resource io_mem = { | 
|  | .name	= "PCI I/O space", | 
|  | .start	= VERSATILE_PCI_MEM_BASE0, | 
|  | .end	= VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1, | 
|  | .flags	= IORESOURCE_IO, | 
|  | }; | 
|  |  | 
|  | static struct resource non_mem = { | 
|  | .name	= "PCI non-prefetchable", | 
|  | .start	= VERSATILE_PCI_MEM_BASE1, | 
|  | .end	= VERSATILE_PCI_MEM_BASE1+VERSATILE_PCI_MEM_BASE1_SIZE-1, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | }; | 
|  |  | 
|  | static struct resource pre_mem = { | 
|  | .name	= "PCI prefetchable", | 
|  | .start	= VERSATILE_PCI_MEM_BASE2, | 
|  | .end	= VERSATILE_PCI_MEM_BASE2+VERSATILE_PCI_MEM_BASE2_SIZE-1, | 
|  | .flags	= IORESOURCE_MEM | IORESOURCE_PREFETCH, | 
|  | }; | 
|  |  | 
|  | static int __init pci_versatile_setup_resources(struct resource **resource) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | ret = request_resource(&iomem_resource, &io_mem); | 
|  | if (ret) { | 
|  | printk(KERN_ERR "PCI: unable to allocate I/O " | 
|  | "memory region (%d)\n", ret); | 
|  | goto out; | 
|  | } | 
|  | ret = request_resource(&iomem_resource, &non_mem); | 
|  | if (ret) { | 
|  | printk(KERN_ERR "PCI: unable to allocate non-prefetchable " | 
|  | "memory region (%d)\n", ret); | 
|  | goto release_io_mem; | 
|  | } | 
|  | ret = request_resource(&iomem_resource, &pre_mem); | 
|  | if (ret) { | 
|  | printk(KERN_ERR "PCI: unable to allocate prefetchable " | 
|  | "memory region (%d)\n", ret); | 
|  | goto release_non_mem; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bus->resource[0] is the IO resource for this bus | 
|  | * bus->resource[1] is the mem resource for this bus | 
|  | * bus->resource[2] is the prefetch mem resource for this bus | 
|  | */ | 
|  | resource[0] = &io_mem; | 
|  | resource[1] = &non_mem; | 
|  | resource[2] = &pre_mem; | 
|  |  | 
|  | goto out; | 
|  |  | 
|  | release_non_mem: | 
|  | release_resource(&non_mem); | 
|  | release_io_mem: | 
|  | release_resource(&io_mem); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) | 
|  | { | 
|  | int ret = 0; | 
|  | int i; | 
|  | int myslot = -1; | 
|  | unsigned long val; | 
|  |  | 
|  | if (nr == 0) { | 
|  | sys->mem_offset = 0; | 
|  | ret = pci_versatile_setup_resources(sys->resource); | 
|  | if (ret < 0) { | 
|  | printk("pci_versatile_setup: resources... oops?\n"); | 
|  | goto out; | 
|  | } | 
|  | } else { | 
|  | printk("pci_versatile_setup: resources... nr == 0??\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28,PCI_IMAP0); | 
|  | __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28,PCI_IMAP1); | 
|  | __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28,PCI_IMAP2); | 
|  |  | 
|  | __raw_writel(1, SYS_PCICTL); | 
|  |  | 
|  | val = __raw_readl(SYS_PCICTL); | 
|  | if (!(val & 1)) { | 
|  | printk("Not plugged into PCI backplane!\n"); | 
|  | ret = -EIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  We need to discover the PCI core first to configure itself | 
|  | *  before the main PCI probing is performed | 
|  | */ | 
|  | for (i=0; i<32; i++) { | 
|  | if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) && | 
|  | (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) { | 
|  | myslot = i; | 
|  |  | 
|  | __raw_writel(myslot, PCI_SELFID); | 
|  | val = __raw_readl(VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); | 
|  | val |= (1<<2); | 
|  | __raw_writel(val, VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (myslot == -1) { | 
|  | printk("Cannot find PCI core!\n"); | 
|  | ret = -EIO; | 
|  | } else { | 
|  | printk("PCI core found (slot %d)\n",myslot); | 
|  | /* Do not to map Versatile FPGA PCI device | 
|  | into memory space as we are short of | 
|  | mappable memory */ | 
|  | pci_slot_ignore |= (1 << myslot); | 
|  | ret = 1; | 
|  | } | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) | 
|  | { | 
|  | return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * V3_LB_BASE? - local bus address | 
|  | * V3_LB_MAP?  - pci bus address | 
|  | */ | 
|  | void __init pci_versatile_preinit(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | void __init pci_versatile_postinit(void) | 
|  | { | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * map the specified device/slot/pin to an IRQ.   Different backplanes may need to modify this. | 
|  | */ | 
|  | static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) | 
|  | { | 
|  | int irq; | 
|  | int devslot = PCI_SLOT(dev->devfn); | 
|  |  | 
|  | /* slot,  pin,  irq | 
|  | 24	  1	27 | 
|  | 25    1	28	untested | 
|  | 26	  1	29 | 
|  | 27    1	30	untested | 
|  | */ | 
|  |  | 
|  | irq = 27 + ((slot + pin + 2) % 3);	/* Fudged */ | 
|  |  | 
|  | printk("map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq); | 
|  |  | 
|  | return irq; | 
|  | } | 
|  |  | 
|  | static struct hw_pci versatile_pci __initdata = { | 
|  | .swizzle		= NULL, | 
|  | .map_irq		= versatile_map_irq, | 
|  | .nr_controllers		= 1, | 
|  | .setup			= pci_versatile_setup, | 
|  | .scan			= pci_versatile_scan_bus, | 
|  | .preinit		= pci_versatile_preinit, | 
|  | .postinit		= pci_versatile_postinit, | 
|  | }; | 
|  |  | 
|  | static int __init versatile_pci_init(void) | 
|  | { | 
|  | pci_common_init(&versatile_pci); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | subsys_initcall(versatile_pci_init); |