|  | /* | 
|  | *	Low-Level PCI Access for i386 machines | 
|  | * | 
|  | * Copyright 1993, 1994 Drew Eckhardt | 
|  | *      Visionary Computing | 
|  | *      (Unix and Linux consulting and custom programming) | 
|  | *      Drew@Colorado.EDU | 
|  | *      +1 (303) 786-7975 | 
|  | * | 
|  | * Drew's work was sponsored by: | 
|  | *	iX Multiuser Multitasking Magazine | 
|  | *	Hannover, Germany | 
|  | *	hm@ix.de | 
|  | * | 
|  | * Copyright 1997--2000 Martin Mares <mj@ucw.cz> | 
|  | * | 
|  | * For more information, please consult the following manuals (look at | 
|  | * http://www.pcisig.com/ for how to get them): | 
|  | * | 
|  | * PCI BIOS Specification | 
|  | * PCI Local Bus Specification | 
|  | * PCI to PCI Bridge Specification | 
|  | * PCI System Design Guide | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/types.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/errno.h> | 
|  |  | 
|  | #include "pci.h" | 
|  |  | 
|  | /* | 
|  | * We need to avoid collisions with `mirrored' VGA ports | 
|  | * and other strange ISA hardware, so we always want the | 
|  | * addresses to be allocated in the 0x000-0x0ff region | 
|  | * modulo 0x400. | 
|  | * | 
|  | * Why? Because some silly external IO cards only decode | 
|  | * the low 10 bits of the IO address. The 0x00-0xff region | 
|  | * is reserved for motherboard devices that decode all 16 | 
|  | * bits, so it's ok to allocate at, say, 0x2800-0x28ff, | 
|  | * but we want to try to avoid allocating at 0x2900-0x2bff | 
|  | * which might have be mirrored at 0x0100-0x03ff.. | 
|  | */ | 
|  | void | 
|  | pcibios_align_resource(void *data, struct resource *res, | 
|  | unsigned long size, unsigned long align) | 
|  | { | 
|  | if (res->flags & IORESOURCE_IO) { | 
|  | unsigned long start = res->start; | 
|  |  | 
|  | if (start & 0x300) { | 
|  | start = (start + 0x3ff) & ~0x3ff; | 
|  | res->start = start; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | *  Handle resources of PCI devices.  If the world were perfect, we could | 
|  | *  just allocate all the resource regions and do nothing more.  It isn't. | 
|  | *  On the other hand, we cannot just re-allocate all devices, as it would | 
|  | *  require us to know lots of host bridge internals.  So we attempt to | 
|  | *  keep as much of the original configuration as possible, but tweak it | 
|  | *  when it's found to be wrong. | 
|  | * | 
|  | *  Known BIOS problems we have to work around: | 
|  | *	- I/O or memory regions not configured | 
|  | *	- regions configured, but not enabled in the command register | 
|  | *	- bogus I/O addresses above 64K used | 
|  | *	- expansion ROMs left enabled (this may sound harmless, but given | 
|  | *	  the fact the PCI specs explicitly allow address decoders to be | 
|  | *	  shared between expansion ROMs and other resource regions, it's | 
|  | *	  at least dangerous) | 
|  | * | 
|  | *  Our solution: | 
|  | *	(1) Allocate resources for all buses behind PCI-to-PCI bridges. | 
|  | *	    This gives us fixed barriers on where we can allocate. | 
|  | *	(2) Allocate resources for all enabled devices.  If there is | 
|  | *	    a collision, just mark the resource as unallocated. Also | 
|  | *	    disable expansion ROMs during this step. | 
|  | *	(3) Try to allocate resources for disabled devices.  If the | 
|  | *	    resources were assigned correctly, everything goes well, | 
|  | *	    if they weren't, they won't disturb allocation of other | 
|  | *	    resources. | 
|  | *	(4) Assign new addresses to resources which were either | 
|  | *	    not configured at all or misconfigured.  If explicitly | 
|  | *	    requested by the user, configure expansion ROM address | 
|  | *	    as well. | 
|  | */ | 
|  |  | 
|  | static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) | 
|  | { | 
|  | struct pci_bus *bus; | 
|  | struct pci_dev *dev; | 
|  | int idx; | 
|  | struct resource *r, *pr; | 
|  |  | 
|  | /* Depth-First Search on bus tree */ | 
|  | list_for_each_entry(bus, bus_list, node) { | 
|  | if ((dev = bus->self)) { | 
|  | for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) { | 
|  | r = &dev->resource[idx]; | 
|  | if (!r->start) | 
|  | continue; | 
|  | pr = pci_find_parent_resource(dev, r); | 
|  | if (!pr || request_resource(pr, r) < 0) | 
|  | printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev)); | 
|  | } | 
|  | } | 
|  | pcibios_allocate_bus_resources(&bus->children); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __init pcibios_allocate_resources(int pass) | 
|  | { | 
|  | struct pci_dev *dev = NULL; | 
|  | int idx, disabled; | 
|  | u16 command; | 
|  | struct resource *r, *pr; | 
|  |  | 
|  | for_each_pci_dev(dev) { | 
|  | pci_read_config_word(dev, PCI_COMMAND, &command); | 
|  | for(idx = 0; idx < 6; idx++) { | 
|  | r = &dev->resource[idx]; | 
|  | if (r->parent)		/* Already allocated */ | 
|  | continue; | 
|  | if (!r->start)		/* Address not assigned at all */ | 
|  | continue; | 
|  | if (r->flags & IORESOURCE_IO) | 
|  | disabled = !(command & PCI_COMMAND_IO); | 
|  | else | 
|  | disabled = !(command & PCI_COMMAND_MEMORY); | 
|  | if (pass == disabled) { | 
|  | DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n", | 
|  | r->start, r->end, r->flags, disabled, pass); | 
|  | pr = pci_find_parent_resource(dev, r); | 
|  | if (!pr || request_resource(pr, r) < 0) { | 
|  | printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev)); | 
|  | /* We'll assign a new address later */ | 
|  | r->end -= r->start; | 
|  | r->start = 0; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (!pass) { | 
|  | r = &dev->resource[PCI_ROM_RESOURCE]; | 
|  | if (r->flags & IORESOURCE_ROM_ENABLE) { | 
|  | /* Turn the ROM off, leave the resource region, but keep it unregistered. */ | 
|  | u32 reg; | 
|  | DBG("PCI: Switching off ROM of %s\n", pci_name(dev)); | 
|  | r->flags &= ~IORESOURCE_ROM_ENABLE; | 
|  | pci_read_config_dword(dev, dev->rom_base_reg, ®); | 
|  | pci_write_config_dword(dev, dev->rom_base_reg, reg & ~PCI_ROM_ADDRESS_ENABLE); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int __init pcibios_assign_resources(void) | 
|  | { | 
|  | struct pci_dev *dev = NULL; | 
|  | int idx; | 
|  | struct resource *r; | 
|  |  | 
|  | for_each_pci_dev(dev) { | 
|  | int class = dev->class >> 8; | 
|  |  | 
|  | /* Don't touch classless devices and host bridges */ | 
|  | if (!class || class == PCI_CLASS_BRIDGE_HOST) | 
|  | continue; | 
|  |  | 
|  | for(idx=0; idx<6; idx++) { | 
|  | r = &dev->resource[idx]; | 
|  |  | 
|  | /* | 
|  | *  Don't touch IDE controllers and I/O ports of video cards! | 
|  | */ | 
|  | if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) || | 
|  | (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO))) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | *  We shall assign a new address to this resource, either because | 
|  | *  the BIOS forgot to do so or because we have decided the old | 
|  | *  address was unusable for some reason. | 
|  | */ | 
|  | if (!r->start && r->end) | 
|  | pci_assign_resource(dev, idx); | 
|  | } | 
|  |  | 
|  | if (pci_probe & PCI_ASSIGN_ROMS) { | 
|  | r = &dev->resource[PCI_ROM_RESOURCE]; | 
|  | r->end -= r->start; | 
|  | r->start = 0; | 
|  | if (r->end) | 
|  | pci_assign_resource(dev, PCI_ROM_RESOURCE); | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void __init pcibios_resource_survey(void) | 
|  | { | 
|  | DBG("PCI: Allocating resources\n"); | 
|  | pcibios_allocate_bus_resources(&pci_root_buses); | 
|  | pcibios_allocate_resources(0); | 
|  | pcibios_allocate_resources(1); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * called in fs_initcall (one below subsys_initcall), | 
|  | * give a chance for motherboard reserve resources | 
|  | */ | 
|  | fs_initcall(pcibios_assign_resources); | 
|  |  | 
|  | int pcibios_enable_resources(struct pci_dev *dev, int mask) | 
|  | { | 
|  | u16 cmd, old_cmd; | 
|  | int idx; | 
|  | struct resource *r; | 
|  |  | 
|  | pci_read_config_word(dev, PCI_COMMAND, &cmd); | 
|  | old_cmd = cmd; | 
|  | for(idx=0; idx<6; idx++) { | 
|  | /* Only set up the requested stuff */ | 
|  | if (!(mask & (1<<idx))) | 
|  | continue; | 
|  |  | 
|  | r = &dev->resource[idx]; | 
|  | if (!r->start && r->end) { | 
|  | printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); | 
|  | return -EINVAL; | 
|  | } | 
|  | if (r->flags & IORESOURCE_IO) | 
|  | cmd |= PCI_COMMAND_IO; | 
|  | if (r->flags & IORESOURCE_MEM) | 
|  | cmd |= PCI_COMMAND_MEMORY; | 
|  | } | 
|  | if (dev->resource[PCI_ROM_RESOURCE].start) | 
|  | cmd |= PCI_COMMAND_MEMORY; | 
|  | if (cmd != old_cmd) { | 
|  | printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd); | 
|  | pci_write_config_word(dev, PCI_COMMAND, cmd); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  If we set up a device for bus mastering, we need to check the latency | 
|  | *  timer as certain crappy BIOSes forget to set it properly. | 
|  | */ | 
|  | unsigned int pcibios_max_latency = 255; | 
|  |  | 
|  | void pcibios_set_master(struct pci_dev *dev) | 
|  | { | 
|  | u8 lat; | 
|  | pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); | 
|  | if (lat < 16) | 
|  | lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; | 
|  | else if (lat > pcibios_max_latency) | 
|  | lat = pcibios_max_latency; | 
|  | else | 
|  | return; | 
|  | printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); | 
|  | pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); | 
|  | } | 
|  |  | 
|  | int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, | 
|  | enum pci_mmap_state mmap_state, int write_combine) | 
|  | { | 
|  | unsigned long prot; | 
|  |  | 
|  | /* I/O space cannot be accessed via normal processor loads and | 
|  | * stores on this platform. | 
|  | */ | 
|  | if (mmap_state == pci_mmap_io) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Leave vm_pgoff as-is, the PCI space address is the physical | 
|  | * address on this platform. | 
|  | */ | 
|  | vma->vm_flags |= (VM_SHM | VM_LOCKED | VM_IO); | 
|  |  | 
|  | prot = pgprot_val(vma->vm_page_prot); | 
|  | if (boot_cpu_data.x86 > 3) | 
|  | prot |= _PAGE_PCD | _PAGE_PWT; | 
|  | vma->vm_page_prot = __pgprot(prot); | 
|  |  | 
|  | /* Write-combine setting is ignored, it is changed via the mtrr | 
|  | * interfaces on this platform. | 
|  | */ | 
|  | if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, | 
|  | vma->vm_end - vma->vm_start, | 
|  | vma->vm_page_prot)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | return 0; | 
|  | } |