|  | /* | 
|  | * Simulated SCSI driver. | 
|  | * | 
|  | * Copyright (C) 1999, 2001-2003 Hewlett-Packard Co | 
|  | *	David Mosberger-Tang <davidm@hpl.hp.com> | 
|  | *	Stephane Eranian <eranian@hpl.hp.com> | 
|  | * | 
|  | * 02/01/15 David Mosberger	Updated for v2.5.1 | 
|  | * 99/12/18 David Mosberger	Added support for READ10/WRITE10 needed by linux v2.3.33 | 
|  | */ | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/timer.h> | 
|  | #include <asm/irq.h> | 
|  |  | 
|  | #include <scsi/scsi.h> | 
|  | #include <scsi/scsi_cmnd.h> | 
|  | #include <scsi/scsi_device.h> | 
|  | #include <scsi/scsi_host.h> | 
|  |  | 
|  | #define DEBUG_SIMSCSI	0 | 
|  |  | 
|  | #define SIMSCSI_REQ_QUEUE_LEN	64 | 
|  | #define DEFAULT_SIMSCSI_ROOT	"/var/ski-disks/sd" | 
|  |  | 
|  | /* Simulator system calls: */ | 
|  |  | 
|  | #define SSC_OPEN			50 | 
|  | #define SSC_CLOSE			51 | 
|  | #define SSC_READ			52 | 
|  | #define SSC_WRITE			53 | 
|  | #define SSC_GET_COMPLETION		54 | 
|  | #define SSC_WAIT_COMPLETION		55 | 
|  |  | 
|  | #define SSC_WRITE_ACCESS		2 | 
|  | #define SSC_READ_ACCESS			1 | 
|  |  | 
|  | #if DEBUG_SIMSCSI | 
|  | int simscsi_debug; | 
|  | # define DBG	simscsi_debug | 
|  | #else | 
|  | # define DBG	0 | 
|  | #endif | 
|  |  | 
|  | static struct Scsi_Host *host; | 
|  |  | 
|  | static void simscsi_interrupt (unsigned long val); | 
|  | static DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0); | 
|  |  | 
|  | struct disk_req { | 
|  | unsigned long addr; | 
|  | unsigned len; | 
|  | }; | 
|  |  | 
|  | struct disk_stat { | 
|  | int fd; | 
|  | unsigned count; | 
|  | }; | 
|  |  | 
|  | extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr); | 
|  |  | 
|  | static int desc[16] = { | 
|  | -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 | 
|  | }; | 
|  |  | 
|  | static struct queue_entry { | 
|  | struct scsi_cmnd *sc; | 
|  | } queue[SIMSCSI_REQ_QUEUE_LEN]; | 
|  |  | 
|  | static int rd, wr; | 
|  | static atomic_t num_reqs = ATOMIC_INIT(0); | 
|  |  | 
|  | /* base name for default disks */ | 
|  | static char *simscsi_root = DEFAULT_SIMSCSI_ROOT; | 
|  |  | 
|  | #define MAX_ROOT_LEN	128 | 
|  |  | 
|  | /* | 
|  | * used to setup a new base for disk images | 
|  | * to use /foo/bar/disk[a-z] as disk images | 
|  | * you have to specify simscsi=/foo/bar/disk on the command line | 
|  | */ | 
|  | static int __init | 
|  | simscsi_setup (char *s) | 
|  | { | 
|  | /* XXX Fix me we may need to strcpy() ? */ | 
|  | if (strlen(s) > MAX_ROOT_LEN) { | 
|  | printk(KERN_ERR "simscsi_setup: prefix too long---using default %s\n", | 
|  | simscsi_root); | 
|  | } | 
|  | simscsi_root = s; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | __setup("simscsi=", simscsi_setup); | 
|  |  | 
|  | static void | 
|  | simscsi_interrupt (unsigned long val) | 
|  | { | 
|  | struct scsi_cmnd *sc; | 
|  |  | 
|  | while ((sc = queue[rd].sc) != 0) { | 
|  | atomic_dec(&num_reqs); | 
|  | queue[rd].sc = 0; | 
|  | if (DBG) | 
|  | printk("simscsi_interrupt: done with %ld\n", sc->serial_number); | 
|  | (*sc->scsi_done)(sc); | 
|  | rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int | 
|  | simscsi_biosparam (struct scsi_device *sdev, struct block_device *n, | 
|  | sector_t capacity, int ip[]) | 
|  | { | 
|  | ip[0] = 64;		/* heads */ | 
|  | ip[1] = 32;		/* sectors */ | 
|  | ip[2] = capacity >> 11;	/* cylinders */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | simscsi_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset, unsigned long len) | 
|  | { | 
|  | struct disk_stat stat; | 
|  | struct disk_req req; | 
|  |  | 
|  | req.addr = __pa(sc->request_buffer); | 
|  | req.len  = len;			/* # of bytes to transfer */ | 
|  |  | 
|  | if (sc->request_bufflen < req.len) | 
|  | return; | 
|  |  | 
|  | stat.fd = desc[sc->device->id]; | 
|  | if (DBG) | 
|  | printk("simscsi_%s @ %lx (off %lx)\n", | 
|  | mode == SSC_READ ? "read":"write", req.addr, offset); | 
|  | ia64_ssc(stat.fd, 1, __pa(&req), offset, mode); | 
|  | ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); | 
|  |  | 
|  | if (stat.count == req.len) { | 
|  | sc->result = GOOD; | 
|  | } else { | 
|  | sc->result = DID_ERROR << 16; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset) | 
|  | { | 
|  | int list_len = sc->use_sg; | 
|  | struct scatterlist *sl = (struct scatterlist *)sc->buffer; | 
|  | struct disk_stat stat; | 
|  | struct disk_req req; | 
|  |  | 
|  | stat.fd = desc[sc->device->id]; | 
|  |  | 
|  | while (list_len) { | 
|  | req.addr = __pa(page_address(sl->page) + sl->offset); | 
|  | req.len  = sl->length; | 
|  | if (DBG) | 
|  | printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n", | 
|  | mode == SSC_READ ? "read":"write", req.addr, offset, | 
|  | list_len, sl->length); | 
|  | ia64_ssc(stat.fd, 1, __pa(&req), offset, mode); | 
|  | ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); | 
|  |  | 
|  | /* should not happen in our case */ | 
|  | if (stat.count != req.len) { | 
|  | sc->result = DID_ERROR << 16; | 
|  | return; | 
|  | } | 
|  | offset +=  sl->length; | 
|  | sl++; | 
|  | list_len--; | 
|  | } | 
|  | sc->result = GOOD; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * function handling both READ_6/WRITE_6 (non-scatter/gather mode) | 
|  | * commands. | 
|  | * Added 02/26/99 S.Eranian | 
|  | */ | 
|  | static void | 
|  | simscsi_readwrite6 (struct scsi_cmnd *sc, int mode) | 
|  | { | 
|  | unsigned long offset; | 
|  |  | 
|  | offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512; | 
|  | if (sc->use_sg > 0) | 
|  | simscsi_sg_readwrite(sc, mode, offset); | 
|  | else | 
|  | simscsi_readwrite(sc, mode, offset, sc->cmnd[4]*512); | 
|  | } | 
|  |  | 
|  | static size_t | 
|  | simscsi_get_disk_size (int fd) | 
|  | { | 
|  | struct disk_stat stat; | 
|  | size_t bit, sectors = 0; | 
|  | struct disk_req req; | 
|  | char buf[512]; | 
|  |  | 
|  | /* | 
|  | * This is a bit kludgey: the simulator doesn't provide a direct way of determining | 
|  | * the disk size, so we do a binary search, assuming a maximum disk size of 4GB. | 
|  | */ | 
|  | for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) { | 
|  | req.addr = __pa(&buf); | 
|  | req.len = sizeof(buf); | 
|  | ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ); | 
|  | stat.fd = fd; | 
|  | ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); | 
|  | if (stat.count == sizeof(buf)) | 
|  | sectors |= bit; | 
|  | } | 
|  | return sectors - 1;	/* return last valid sector number */ | 
|  | } | 
|  |  | 
|  | static void | 
|  | simscsi_readwrite10 (struct scsi_cmnd *sc, int mode) | 
|  | { | 
|  | unsigned long offset; | 
|  |  | 
|  | offset = (  (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16) | 
|  | | (sc->cmnd[4] <<  8) | (sc->cmnd[5] <<  0))*512; | 
|  | if (sc->use_sg > 0) | 
|  | simscsi_sg_readwrite(sc, mode, offset); | 
|  | else | 
|  | simscsi_readwrite(sc, mode, offset, ((sc->cmnd[7] << 8) | sc->cmnd[8])*512); | 
|  | } | 
|  |  | 
|  | static int | 
|  | simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) | 
|  | { | 
|  | unsigned int target_id = sc->device->id; | 
|  | char fname[MAX_ROOT_LEN+16]; | 
|  | size_t disk_size; | 
|  | char *buf; | 
|  | #if DEBUG_SIMSCSI | 
|  | register long sp asm ("sp"); | 
|  |  | 
|  | if (DBG) | 
|  | printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%lu,sp=%lx,done=%p\n", | 
|  | target_id, sc->cmnd[0], sc->serial_number, sp, done); | 
|  | #endif | 
|  |  | 
|  | sc->result = DID_BAD_TARGET << 16; | 
|  | sc->scsi_done = done; | 
|  | if (target_id <= 15 && sc->device->lun == 0) { | 
|  | switch (sc->cmnd[0]) { | 
|  | case INQUIRY: | 
|  | if (sc->request_bufflen < 35) { | 
|  | break; | 
|  | } | 
|  | sprintf (fname, "%s%c", simscsi_root, 'a' + target_id); | 
|  | desc[target_id] = ia64_ssc(__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS, | 
|  | 0, 0, SSC_OPEN); | 
|  | if (desc[target_id] < 0) { | 
|  | /* disk doesn't exist... */ | 
|  | break; | 
|  | } | 
|  | buf = sc->request_buffer; | 
|  | buf[0] = 0;	/* magnetic disk */ | 
|  | buf[1] = 0;	/* not a removable medium */ | 
|  | buf[2] = 2;	/* SCSI-2 compliant device */ | 
|  | buf[3] = 2;	/* SCSI-2 response data format */ | 
|  | buf[4] = 31;	/* additional length (bytes) */ | 
|  | buf[5] = 0;	/* reserved */ | 
|  | buf[6] = 0;	/* reserved */ | 
|  | buf[7] = 0;	/* various flags */ | 
|  | memcpy(buf + 8, "HP      SIMULATED DISK  0.00",  28); | 
|  | sc->result = GOOD; | 
|  | break; | 
|  |  | 
|  | case TEST_UNIT_READY: | 
|  | sc->result = GOOD; | 
|  | break; | 
|  |  | 
|  | case READ_6: | 
|  | if (desc[target_id] < 0 ) | 
|  | break; | 
|  | simscsi_readwrite6(sc, SSC_READ); | 
|  | break; | 
|  |  | 
|  | case READ_10: | 
|  | if (desc[target_id] < 0 ) | 
|  | break; | 
|  | simscsi_readwrite10(sc, SSC_READ); | 
|  | break; | 
|  |  | 
|  | case WRITE_6: | 
|  | if (desc[target_id] < 0) | 
|  | break; | 
|  | simscsi_readwrite6(sc, SSC_WRITE); | 
|  | break; | 
|  |  | 
|  | case WRITE_10: | 
|  | if (desc[target_id] < 0) | 
|  | break; | 
|  | simscsi_readwrite10(sc, SSC_WRITE); | 
|  | break; | 
|  |  | 
|  |  | 
|  | case READ_CAPACITY: | 
|  | if (desc[target_id] < 0 || sc->request_bufflen < 8) { | 
|  | break; | 
|  | } | 
|  | buf = sc->request_buffer; | 
|  |  | 
|  | disk_size = simscsi_get_disk_size(desc[target_id]); | 
|  |  | 
|  | /* pretend to be a 1GB disk (partition table contains real stuff): */ | 
|  | buf[0] = (disk_size >> 24) & 0xff; | 
|  | buf[1] = (disk_size >> 16) & 0xff; | 
|  | buf[2] = (disk_size >>  8) & 0xff; | 
|  | buf[3] = (disk_size >>  0) & 0xff; | 
|  | /* set block size of 512 bytes: */ | 
|  | buf[4] = 0; | 
|  | buf[5] = 0; | 
|  | buf[6] = 2; | 
|  | buf[7] = 0; | 
|  | sc->result = GOOD; | 
|  | break; | 
|  |  | 
|  | case MODE_SENSE: | 
|  | case MODE_SENSE_10: | 
|  | /* sd.c uses this to determine whether disk does write-caching. */ | 
|  | memset(sc->request_buffer, 0, 128); | 
|  | sc->result = GOOD; | 
|  | break; | 
|  |  | 
|  | case START_STOP: | 
|  | printk(KERN_ERR "START_STOP\n"); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]); | 
|  | } | 
|  | } | 
|  | if (sc->result == DID_BAD_TARGET) { | 
|  | sc->result |= DRIVER_SENSE << 24; | 
|  | sc->sense_buffer[0] = 0x70; | 
|  | sc->sense_buffer[2] = 0x00; | 
|  | } | 
|  | if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) { | 
|  | panic("Attempt to queue command while command is pending!!"); | 
|  | } | 
|  | atomic_inc(&num_reqs); | 
|  | queue[wr].sc = sc; | 
|  | wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN; | 
|  |  | 
|  | tasklet_schedule(&simscsi_tasklet); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | simscsi_host_reset (struct scsi_cmnd *sc) | 
|  | { | 
|  | printk(KERN_ERR "simscsi_host_reset: not implemented\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct scsi_host_template driver_template = { | 
|  | .name			= "simulated SCSI host adapter", | 
|  | .proc_name		= "simscsi", | 
|  | .queuecommand		= simscsi_queuecommand, | 
|  | .eh_host_reset_handler	= simscsi_host_reset, | 
|  | .bios_param		= simscsi_biosparam, | 
|  | .can_queue		= SIMSCSI_REQ_QUEUE_LEN, | 
|  | .this_id		= -1, | 
|  | .sg_tablesize		= SG_ALL, | 
|  | .max_sectors		= 1024, | 
|  | .cmd_per_lun		= SIMSCSI_REQ_QUEUE_LEN, | 
|  | .use_clustering		= DISABLE_CLUSTERING, | 
|  | }; | 
|  |  | 
|  | static int __init | 
|  | simscsi_init(void) | 
|  | { | 
|  | int error; | 
|  |  | 
|  | host = scsi_host_alloc(&driver_template, 0); | 
|  | if (!host) | 
|  | return -ENOMEM; | 
|  |  | 
|  | error = scsi_add_host(host, NULL); | 
|  | if (!error) | 
|  | scsi_scan_host(host); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static void __exit | 
|  | simscsi_exit(void) | 
|  | { | 
|  | scsi_remove_host(host); | 
|  | scsi_host_put(host); | 
|  | } | 
|  |  | 
|  | module_init(simscsi_init); | 
|  | module_exit(simscsi_exit); |