|  | #ifndef _TAS_COMMON_H_ | 
|  | #define _TAS_COMMON_H_ | 
|  |  | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/soundcard.h> | 
|  | #include <asm/string.h> | 
|  |  | 
|  | #define I2C_DRIVERID_TAS_BASE   (0xFEBA) | 
|  |  | 
|  | #define SET_4_20(shadow, offset, val)                        \ | 
|  | do {                                                 \ | 
|  | (shadow)[(offset)+0] = ((val) >> 16) & 0xff; \ | 
|  | (shadow)[(offset)+1] = ((val) >> 8)  & 0xff; \ | 
|  | (shadow)[(offset)+2] = ((val) >> 0)  & 0xff; \ | 
|  | } while (0) | 
|  |  | 
|  | #define GET_4_20(shadow, offset)                             \ | 
|  | (((u_int)((shadow)[(offset)+0]) << 16) |             \ | 
|  | ((u_int)((shadow)[(offset)+1]) <<  8) |             \ | 
|  | ((u_int)((shadow)[(offset)+2]) <<  0)) | 
|  |  | 
|  |  | 
|  | #define TAS_BIQUAD_FAST_LOAD 0x01 | 
|  |  | 
|  | #define TAS_DRCE_ENABLE           0x01 | 
|  | #define TAS_DRCE_ABOVE_RATIO      0x02 | 
|  | #define TAS_DRCE_BELOW_RATIO      0x04 | 
|  | #define TAS_DRCE_THRESHOLD        0x08 | 
|  | #define TAS_DRCE_ENERGY           0x10 | 
|  | #define TAS_DRCE_ATTACK           0x20 | 
|  | #define TAS_DRCE_DECAY            0x40 | 
|  |  | 
|  | #define TAS_DRCE_ALL              0x7f | 
|  |  | 
|  |  | 
|  | #define TAS_OUTPUT_HEADPHONES     0x00 | 
|  | #define TAS_OUTPUT_INTERNAL_SPKR  0x01 | 
|  | #define TAS_OUTPUT_EXTERNAL_SPKR  0x02 | 
|  |  | 
|  |  | 
|  | union tas_biquad_t { | 
|  | struct { | 
|  | int b0,b1,b2,a1,a2; | 
|  | } coeff; | 
|  | int buf[5]; | 
|  | }; | 
|  |  | 
|  | struct tas_biquad_ctrl_t { | 
|  | u_int channel:4; | 
|  | u_int filter:4; | 
|  |  | 
|  | union tas_biquad_t data; | 
|  | }; | 
|  |  | 
|  | struct tas_biquad_ctrl_list_t { | 
|  | int flags; | 
|  | int filter_count; | 
|  | struct tas_biquad_ctrl_t biquads[0]; | 
|  | }; | 
|  |  | 
|  | struct tas_ratio_t { | 
|  | unsigned short val;    /* 8.8                        */ | 
|  | unsigned short expand; /* 0 = compress, !0 = expand. */ | 
|  | }; | 
|  |  | 
|  | struct tas_drce_t { | 
|  | unsigned short enable; | 
|  | struct tas_ratio_t above; | 
|  | struct tas_ratio_t below; | 
|  | short threshold;       /* dB,       8.8 signed    */ | 
|  | unsigned short energy; /* seconds,  4.12 unsigned */ | 
|  | unsigned short attack; /* seconds,  4.12 unsigned */ | 
|  | unsigned short decay;  /* seconds,  4.12 unsigned */ | 
|  | }; | 
|  |  | 
|  | struct tas_drce_ctrl_t { | 
|  | uint flags; | 
|  |  | 
|  | struct tas_drce_t data; | 
|  | }; | 
|  |  | 
|  | struct tas_gain_t | 
|  | { | 
|  | unsigned int *master; | 
|  | unsigned int *treble; | 
|  | unsigned int *bass; | 
|  | unsigned int *mixer; | 
|  | }; | 
|  |  | 
|  | typedef char tas_shadow_t[0x45]; | 
|  |  | 
|  | struct tas_data_t | 
|  | { | 
|  | struct i2c_client *client; | 
|  | tas_shadow_t *shadow; | 
|  | uint mixer[SOUND_MIXER_NRDEVICES]; | 
|  | }; | 
|  |  | 
|  | typedef int (*tas_hook_init_t)(struct i2c_client *); | 
|  | typedef int (*tas_hook_post_init_t)(struct tas_data_t *); | 
|  | typedef void (*tas_hook_uninit_t)(struct tas_data_t *); | 
|  |  | 
|  | typedef int (*tas_hook_get_mixer_level_t)(struct tas_data_t *,int,uint *); | 
|  | typedef int (*tas_hook_set_mixer_level_t)(struct tas_data_t *,int,uint); | 
|  |  | 
|  | typedef int (*tas_hook_enter_sleep_t)(struct tas_data_t *); | 
|  | typedef int (*tas_hook_leave_sleep_t)(struct tas_data_t *); | 
|  |  | 
|  | typedef int (*tas_hook_supported_mixers_t)(struct tas_data_t *); | 
|  | typedef int (*tas_hook_mixer_is_stereo_t)(struct tas_data_t *,int); | 
|  | typedef int (*tas_hook_stereo_mixers_t)(struct tas_data_t *); | 
|  |  | 
|  | typedef int (*tas_hook_output_device_change_t)(struct tas_data_t *,int,int,int); | 
|  | typedef int (*tas_hook_device_ioctl_t)(struct tas_data_t *,u_int,u_long); | 
|  |  | 
|  | struct tas_driver_hooks_t { | 
|  | /* | 
|  | * All hardware initialisation must be performed in | 
|  | * post_init(), as tas_dmasound_init() does a hardware reset. | 
|  | * | 
|  | * init() is called before tas_dmasound_init() so that | 
|  | * ouput_device_change() is always called after i2c driver | 
|  | * initialisation. The implication is that | 
|  | * output_device_change() must cope with the fact that it | 
|  | * may be called before post_init(). | 
|  | */ | 
|  |  | 
|  | tas_hook_init_t                   init; | 
|  | tas_hook_post_init_t              post_init; | 
|  | tas_hook_uninit_t                 uninit; | 
|  |  | 
|  | tas_hook_get_mixer_level_t        get_mixer_level; | 
|  | tas_hook_set_mixer_level_t        set_mixer_level; | 
|  |  | 
|  | tas_hook_enter_sleep_t            enter_sleep; | 
|  | tas_hook_leave_sleep_t            leave_sleep; | 
|  |  | 
|  | tas_hook_supported_mixers_t       supported_mixers; | 
|  | tas_hook_mixer_is_stereo_t        mixer_is_stereo; | 
|  | tas_hook_stereo_mixers_t          stereo_mixers; | 
|  |  | 
|  | tas_hook_output_device_change_t   output_device_change; | 
|  | tas_hook_device_ioctl_t           device_ioctl; | 
|  | }; | 
|  |  | 
|  | enum tas_write_mode_t { | 
|  | WRITE_HW     = 0x01, | 
|  | WRITE_SHADOW = 0x02, | 
|  | WRITE_NORMAL = 0x03, | 
|  | FORCE_WRITE  = 0x04 | 
|  | }; | 
|  |  | 
|  | static inline uint | 
|  | tas_mono_to_stereo(uint mono) | 
|  | { | 
|  | mono &=0xff; | 
|  | return mono | (mono<<8); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Todo: make these functions a bit more efficient ! | 
|  | */ | 
|  | static inline int | 
|  | tas_write_register(	struct tas_data_t *self, | 
|  | uint reg_num, | 
|  | uint reg_width, | 
|  | char *data, | 
|  | uint write_mode) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | if (reg_width==0 || data==NULL || self==NULL) | 
|  | return -EINVAL; | 
|  | if (!(write_mode & FORCE_WRITE) && | 
|  | !memcmp(data,self->shadow[reg_num],reg_width)) | 
|  | return 0; | 
|  |  | 
|  | if (write_mode & WRITE_SHADOW) | 
|  | memcpy(self->shadow[reg_num],data,reg_width); | 
|  | if (write_mode & WRITE_HW) { | 
|  | rc=i2c_smbus_write_block_data(self->client, | 
|  | reg_num, | 
|  | reg_width, | 
|  | data); | 
|  | if (rc < 0) { | 
|  | printk("tas: I2C block write failed \n"); | 
|  | return rc; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | tas_sync_register(	struct tas_data_t *self, | 
|  | uint reg_num, | 
|  | uint reg_width) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | if (reg_width==0 || self==NULL) | 
|  | return -EINVAL; | 
|  | rc=i2c_smbus_write_block_data(self->client, | 
|  | reg_num, | 
|  | reg_width, | 
|  | self->shadow[reg_num]); | 
|  | if (rc < 0) { | 
|  | printk("tas: I2C block write failed \n"); | 
|  | return rc; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | tas_write_byte_register(	struct tas_data_t *self, | 
|  | uint reg_num, | 
|  | char data, | 
|  | uint write_mode) | 
|  | { | 
|  | if (self==NULL) | 
|  | return -1; | 
|  | if (!(write_mode & FORCE_WRITE) && data != self->shadow[reg_num][0]) | 
|  | return 0; | 
|  | if (write_mode & WRITE_SHADOW) | 
|  | self->shadow[reg_num][0]=data; | 
|  | if (write_mode & WRITE_HW) { | 
|  | if (i2c_smbus_write_byte_data(self->client, reg_num, data) < 0) { | 
|  | printk("tas: I2C byte write failed \n"); | 
|  | return -1; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | tas_sync_byte_register(	struct tas_data_t *self, | 
|  | uint reg_num, | 
|  | uint reg_width) | 
|  | { | 
|  | if (reg_width==0 || self==NULL) | 
|  | return -1; | 
|  | if (i2c_smbus_write_byte_data( | 
|  | self->client, reg_num, self->shadow[reg_num][0]) < 0) { | 
|  | printk("tas: I2C byte write failed \n"); | 
|  | return -1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | tas_read_register(	struct tas_data_t *self, | 
|  | uint reg_num, | 
|  | uint reg_width, | 
|  | char *data) | 
|  | { | 
|  | if (reg_width==0 || data==NULL || self==NULL) | 
|  | return -1; | 
|  | memcpy(data,self->shadow[reg_num],reg_width); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | extern int tas_register_driver(struct tas_driver_hooks_t *hooks); | 
|  |  | 
|  | extern int tas_get_mixer_level(int mixer,uint *level); | 
|  | extern int tas_set_mixer_level(int mixer,uint level); | 
|  | extern int tas_enter_sleep(void); | 
|  | extern int tas_leave_sleep(void); | 
|  | extern int tas_supported_mixers(void); | 
|  | extern int tas_mixer_is_stereo(int mixer); | 
|  | extern int tas_stereo_mixers(void); | 
|  | extern int tas_output_device_change(int,int,int); | 
|  | extern int tas_device_ioctl(u_int, u_long); | 
|  |  | 
|  | extern void tas_cleanup(void); | 
|  | extern int tas_init(int driver_id,const char *driver_name); | 
|  | extern int tas_post_init(void); | 
|  |  | 
|  | #endif /* _TAS_COMMON_H_ */ | 
|  | /* | 
|  | * Local Variables: | 
|  | * tab-width: 8 | 
|  | * indent-tabs-mode: t | 
|  | * c-basic-offset: 8 | 
|  | * End: | 
|  | */ |